* [PATCH] rework dts file for edmqmx6
@ 2014-05-06 8:44 Silvio Fricke
2014-05-06 8:44 ` [PATCH] ARM: i.MX6: dts: edmqmx6: use new dts approach Silvio Fricke
2014-05-07 6:23 ` [PATCH] rework dts file for edmqmx6 Sascha Hauer
0 siblings, 2 replies; 4+ messages in thread
From: Silvio Fricke @ 2014-05-06 8:44 UTC (permalink / raw)
To: barebox; +Cc: Silvio Fricke
Hi,
here a patch for rework of the dts file for the data-modul base board edmqmx6.
The patch is based on top of the dts-branch 09015ae52c18424c (ARM: Tegra20: Use
upstream dtsi files).
Cheers,
Silvio
Silvio Fricke (1):
ARM: i.MX6: dts: edmqmx6: use new dts approach
arch/arm/dts/imx6q-dmo-edmqmx6.dts | 297 ++-----------------------------------
1 file changed, 9 insertions(+), 288 deletions(-)
--
1.9.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] ARM: i.MX6: dts: edmqmx6: use new dts approach
2014-05-06 8:44 [PATCH] rework dts file for edmqmx6 Silvio Fricke
@ 2014-05-06 8:44 ` Silvio Fricke
2014-05-07 6:23 ` [PATCH] rework dts file for edmqmx6 Sascha Hauer
1 sibling, 0 replies; 4+ messages in thread
From: Silvio Fricke @ 2014-05-06 8:44 UTC (permalink / raw)
To: barebox; +Cc: Silvio Fricke
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
---
arch/arm/dts/imx6q-dmo-edmqmx6.dts | 297 ++-----------------------------------
1 file changed, 9 insertions(+), 288 deletions(-)
diff --git a/arch/arm/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/dts/imx6q-dmo-edmqmx6.dts
index f4f0bd6..7d69b5f 100644
--- a/arch/arm/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/dts/imx6q-dmo-edmqmx6.dts
@@ -1,6 +1,7 @@
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
+ * Copyright 2013-2014 Data-Modul AG
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
@@ -9,14 +10,10 @@
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
-/dts-v1/;
-#include "imx6q.dtsi"
+#include <arm/imx6q-dmo-edmqmx6.dts>
/ {
- model = "Data Modul eDM-QMX6 Board";
- compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
-
chosen {
linux,stdout-path = "/soc/aips-bus@02100000/serial@021e8000";
@@ -40,58 +37,10 @@
};
aliases {
- stmpe0 = &stmpe_1;
+ stmpe0 = &stmpe;
stmpe1 = &stmpe_2;
- gpio7 = &stmpe_gpio_1;
gpio8 = &stmpe_gpio_2;
};
-
- memory {
- reg = <0x10000000 0x80000000>;
- };
-
- di0 {
- compatible = "fsl,imx-parallel-display";
- interface-pix-fmt = "rgb24";
- crtcs = <&ipu1 0>;
- };
-
- regulators {
- compatible = "simple-bus";
-
- reg_2p5v: 2p5v {
- compatible = "regulator-fixed";
- regulator-name = "2P5V";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-always-on;
- };
-
- reg_3p3v: 3p3v {
- compatible = "regulator-fixed";
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_usb_otg_vbus: usb_otg_vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio7 12 0>;
- };
-
- reg_usb_host1: usb_host1_en {
- compatible = "regulator-fixed";
- regulator-name = "usb_host1_en";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 31 0>;
- enable-active-high;
- };
- };
};
&ecspi5 {
@@ -120,185 +69,29 @@
};
};
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
- phy-reset-gpios = <&gpio3 23 0>;
- status = "okay";
-};
-
&i2c2 {
status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2
- &pinctrl_stmpe_1_1
&pinctrl_stmpe_2_1>;
- stmpe_1: stmpe1601@40 {
- compatible = "stmpe1601";
- reg = <0x40>;
- interrupts = <30 0>;
- interrupt-parent = <&gpio3>;
- stmpe_gpio_1: stmpe_gpio {
- compatible = "st,stmpe-gpio";
- };
- };
-
stmpe_2: stmpe1601@44 {
compatible = "stmpe1601";
reg = <0x44>;
interrupts = <2 0>;
interrupt-parent = <&gpio5>;
+
stmpe_gpio_2: stmpe_gpio {
+ #gpio-cells = <2>;
compatible = "st,stmpe-gpio";
};
};
-
- temp1: ad7414@4c {
- compatible = "ad7414";
- reg = <0x4c>;
- };
-
- temp2: ad7414@4d {
- compatible = "ad7414";
- reg = <0x4d>;
- };
-
- rtc: m41t62@68 {
- compatible = "m41t62";
- reg = <0x68>;
- };
-
- pmic: pf0100@08 {
- compatible = "pf0100-regulator";
- reg = <0x08>;
- interrupt-parent = <&gpio3>;
- interrupts = <20 8>;
-
- regulators {
- reg_vddcore: sw1ab {
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1875000>;
- regulator-always-on;
- };
-
- reg_vddsoc: sw1c {
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1875000>;
- regulator-always-on;
- };
-
- reg_gen_3v3: sw2 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_ddr_1v5a: sw3a {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <1975000>;
- regulator-always-on;
- };
-
- reg_ddr_1v5b: sw3b {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <1975000>;
- regulator-always-on;
- };
-
- reg_ddr_vtt: sw4 {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <1975000>;
- regulator-always-on;
- };
-
- reg_5v_600mA: swbst {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5150000>;
- regulator-always-on;
- };
-
- reg_snvs_3v: vsnvs {
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- reg_vrefddr: vrefddr {
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <750000>;
- regulator-always-on;
- };
-
- reg_vgen1_1v5: vgen1 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1550000>;
- /* not used */
- };
-
- reg_vgen2_1v2_eth: vgen2 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1550000>;
- regulator-always-on;
- };
-
- reg_vgen3_2v8: vgen3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_vgen4_1v8: vgen4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_vgen5_1v8_eth: vgen5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_vgen6_3v3: vgen6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
- };
- };
};
&iomuxc {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>, <&pinctrl_pfuze_1>;
-
- hog {
- pinctrl_hog: hoggrp-1 {
- fsl,pins = <
- MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
- MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
- >;
- };
- };
-
- i2c2 {
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <MX6QDL_I2C2_PINGRP3>;
- };
- };
-
- uart {
- pinctrl_uart1: uart1grp {
- fsl,pins = <MX6QDL_UART1_PINGRP2>;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <MX6QDL_UART2_PINGRP1>;
- };
- };
+ pinctrl-0 = <&pinctrl_pfuze_1>;
pfuze {
pinctrl_pfuze_1: pfuze100grp1 {
@@ -308,14 +101,6 @@
};
};
- stmpe_1 {
- pinctrl_stmpe_1_1: stmpe1grp-1 {
- fsl,pins = <
- MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000
- >;
- };
- };
-
stmpe_2 {
pinctrl_stmpe_2_1: stmpe2grp-1 {
fsl,pins = <
@@ -328,72 +113,15 @@
pinctrl_ecspi_5_1: ecspi5rp-1 {
fsl,pins = <
MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000
- MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000
- MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000
- MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x80000000 /* cs0: m25p80 */
+ MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000
+ MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000
+ MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x80000000
>;
};
};
-
- enet {
- pinctrl_enet: enetgrp {
- fsl,pins = <MX6QDL_ENET_PINGRP1>;
- };
- };
-
- usb {
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <MX6QDL_USBOTG_PINGRP1>;
- };
- };
-
- usdhc {
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <MX6QDL_USDHC3_PINGRP_D4>;
- };
-
- pinctrl_usdhc4: usdhc4grp {
- fsl,pins = <MX6QDL_USDHC4_PINGRP_D8>;
- };
- };
-};
-
-&sata {
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
-};
-
-&usbh1 {
- vbus-supply = <®_usb_host1>;
- status = "okay";
- disable-over-current;
-};
-
-&usbotg {
- vbus-supply = <®_usb_otg_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg>;
- disable-over-current;
- status = "okay";
};
&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3>;
- vmmc-supply = <®_3p3v>;
- status = "okay";
-
#address-cells = <1>;
#size-cells = <1>;
@@ -408,13 +136,6 @@
};
&usdhc4 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc4>;
- vmmc-supply = <®_3p3v>;
- non-removable;
- bus-width = <8>;
- status = "okay";
-
#address-cells = <1>;
#size-cells = <1>;
--
1.9.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] rework dts file for edmqmx6
2014-05-06 8:44 [PATCH] rework dts file for edmqmx6 Silvio Fricke
2014-05-06 8:44 ` [PATCH] ARM: i.MX6: dts: edmqmx6: use new dts approach Silvio Fricke
@ 2014-05-07 6:23 ` Sascha Hauer
2014-05-07 9:46 ` Sascha Hauer
1 sibling, 1 reply; 4+ messages in thread
From: Sascha Hauer @ 2014-05-07 6:23 UTC (permalink / raw)
To: Silvio Fricke; +Cc: barebox
On Tue, May 06, 2014 at 10:44:20AM +0200, Silvio Fricke wrote:
> Hi,
>
> here a patch for rework of the dts file for the data-modul base board edmqmx6.
> The patch is based on top of the dts-branch 09015ae52c18424c (ARM: Tegra20: Use
> upstream dtsi files).
Applied, thanks
Sascha
>
>
> Cheers,
> Silvio
>
>
> Silvio Fricke (1):
> ARM: i.MX6: dts: edmqmx6: use new dts approach
>
> arch/arm/dts/imx6q-dmo-edmqmx6.dts | 297 ++-----------------------------------
> 1 file changed, 9 insertions(+), 288 deletions(-)
>
> --
> 1.9.2
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] rework dts file for edmqmx6
2014-05-07 6:23 ` [PATCH] rework dts file for edmqmx6 Sascha Hauer
@ 2014-05-07 9:46 ` Sascha Hauer
0 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2014-05-07 9:46 UTC (permalink / raw)
To: Silvio Fricke; +Cc: barebox
On Wed, May 07, 2014 at 08:23:52AM +0200, Sascha Hauer wrote:
> On Tue, May 06, 2014 at 10:44:20AM +0200, Silvio Fricke wrote:
> > Hi,
> >
> > here a patch for rework of the dts file for the data-modul base board edmqmx6.
> > The patch is based on top of the dts-branch 09015ae52c18424c (ARM: Tegra20: Use
> > upstream dtsi files).
>
> Applied, thanks
And reverted it. It doesn't build:
ERROR (path_references): Reference to non-existent node or label "stmpe"
Silvio, Could you update this patch on current master?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-05-07 9:46 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-05-06 8:44 [PATCH] rework dts file for edmqmx6 Silvio Fricke
2014-05-06 8:44 ` [PATCH] ARM: i.MX6: dts: edmqmx6: use new dts approach Silvio Fricke
2014-05-07 6:23 ` [PATCH] rework dts file for edmqmx6 Sascha Hauer
2014-05-07 9:46 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox