From: Christian Mauderer <christian.mauderer@embedded-brains.de>
To: barebox@lists.infradead.org
Cc: a.fatoum@pengutronix.de
Subject: Re: [PATCH v5] FIT: Parse `load` and `entry` addresses.
Date: Tue, 28 Jul 2020 15:57:14 +0200 [thread overview]
Message-ID: <09d1bc99-aaa0-0b5b-5e98-e0bfbde8fb7b@embedded-brains.de> (raw)
In-Reply-To: <20200715092656.27253-1-christian.mauderer@embedded-brains.de>
Hello,
are there any other changes to make that patch acceptable?
Best regards
Christian Mauderer
On 15/07/2020 11:26, Christian Mauderer wrote:
> According to the U-Boot documentation for the FIT file format, the load
> and entry have to be allways defined for a "kernel" or "standalone".
> But Barebox ignored the parameters. That changes with this patch.
>
> For backward compatibility the default address is still used for images
> without `load` or `entry`.
>
> Signed-off-by: Christian Mauderer <christian.mauderer@embedded-brains.de>
> ---
> common/blspec.c | 1 +
> common/boot.c | 1 +
> common/bootm.c | 24 ++++++++++-
> common/image-fit.c | 97 ++++++++++++++++++++++++++++++++++++++-------
> include/image-fit.h | 3 ++
> 5 files changed, 110 insertions(+), 16 deletions(-)
>
> diff --git a/common/blspec.c b/common/blspec.c
> index 7fb62d310..050aed26a 100644
> --- a/common/blspec.c
> +++ b/common/blspec.c
> @@ -142,6 +142,7 @@ static int blspec_boot(struct bootentry *be, int verbose, int dryrun)
> globalvar_set_match("bootm.initrd", "");
>
> bootm_data_init_defaults(&data);
> + data.os_entry = 0;
>
> devicetree = blspec_entry_var_get(entry, "devicetree");
> initrd = blspec_entry_var_get(entry, "initrd");
> diff --git a/common/boot.c b/common/boot.c
> index dcbe5cc2e..93ac1612d 100644
> --- a/common/boot.c
> +++ b/common/boot.c
> @@ -104,6 +104,7 @@ static int bootscript_boot(struct bootentry *entry, int verbose, int dryrun)
>
> bootm_data_init_defaults(&data);
>
> + data.os_entry = 0;
> if (verbose)
> data.verbose = verbose;
> if (dryrun)
> diff --git a/common/bootm.c b/common/bootm.c
> index 366f31455..8f8dbe6cb 100644
> --- a/common/bootm.c
> +++ b/common/bootm.c
> @@ -58,6 +58,7 @@ void bootm_data_init_defaults(struct bootm_data *data)
> {
> data->initrd_address = UIMAGE_INVALID_ADDRESS;
> data->os_address = UIMAGE_SOME_ADDRESS;
> + data->os_entry = UIMAGE_SOME_ADDRESS;
> data->oftree_file = getenv_nonempty("global.bootm.oftree");
> data->tee_file = getenv_nonempty("global.bootm.tee");
> data->os_file = getenv_nonempty("global.bootm.image");
> @@ -601,6 +602,7 @@ int bootm_boot(struct bootm_data *bootm_data)
>
> if (IS_ENABLED(CONFIG_FITIMAGE) && os_type == filetype_oftree) {
> struct fit_handle *fit;
> + static const char *kernel_img = "kernel";
>
> fit = fit_open(data->os_file, data->verbose, data->verify);
> if (IS_ERR(fit)) {
> @@ -621,10 +623,28 @@ int bootm_boot(struct bootm_data *bootm_data)
> goto err_out;
> }
>
> - ret = fit_open_image(data->os_fit, data->fit_config, "kernel",
> + ret = fit_open_image(data->os_fit, data->fit_config, kernel_img,
> &data->fit_kernel, &data->fit_kernel_size);
> if (ret)
> goto err_out;
> + if (data->os_address == UIMAGE_SOME_ADDRESS) {
> + ret = fit_get_image_address(data->os_fit,
> + data->fit_config,
> + kernel_img,
> + "load", &data->os_address);
> + if (ret)
> + goto err_out;
> + }
> + if (data->os_entry == UIMAGE_SOME_ADDRESS) {
> + unsigned long entry;
> + ret = fit_get_image_address(data->os_fit,
> + data->fit_config,
> + kernel_img,
> + "entry", &entry);
> + if (!ret)
> + data->os_entry = entry - data->os_address;
> + /* Note: Error case used default value. */
> + }
> }
>
> if (os_type == filetype_uimage) {
> @@ -672,6 +692,8 @@ int bootm_boot(struct bootm_data *bootm_data)
>
> if (data->os_address == UIMAGE_SOME_ADDRESS)
> data->os_address = UIMAGE_INVALID_ADDRESS;
> + if (data->os_entry == UIMAGE_SOME_ADDRESS)
> + data->os_entry = 0;
>
> handler = bootm_find_handler(os_type, data);
> if (!handler) {
> diff --git a/common/image-fit.c b/common/image-fit.c
> index 2681d62a9..61aa299b1 100644
> --- a/common/image-fit.c
> +++ b/common/image-fit.c
> @@ -517,6 +517,83 @@ int fit_has_image(struct fit_handle *handle, void *configuration,
> return 1;
> }
>
> +static int fit_get_address(struct device_node *image, const char *property,
> + unsigned long *addr)
> +{
> + const __be32 *cell;
> + int len = 0;
> +
> + cell = of_get_property(image, property, &len);
> + if (!cell)
> + return -EINVAL;
> + if (len > sizeof(*addr))
> + return -ENOTSUPP;
> +
> + *addr = (unsigned long)of_read_number(cell, len / sizeof(*cell));
> + return 0;
> +}
> +
> +static int
> +fit_get_image(struct fit_handle *handle, void *configuration,
> + const char **unit, struct device_node **image)
> +{
> + struct device_node *conf_node = configuration;
> +
> + if (conf_node) {
> + if (of_property_read_string(conf_node, *unit, unit)) {
> + pr_err("No image named '%s'\n", *unit);
> + return -ENOENT;
> + }
> + }
> +
> + *image = of_get_child_by_name(handle->images, *unit);
> + if (!*image)
> + return -ENOENT;
> +
> + return 0;
> +}
> +
> +/**
> + * fit_get_image_address - Get an address from an image in a FIT image
> + * @handle: The FIT image handle
> + * @name: The name of the image to open
> + * @property: The name of the address to get (for example "load" or "entry")
> + * @address: The address given by the image
> + *
> + * Try to parse the @property in the image @name as an address. @configuration
> + * holds the cookie returned from fit_open_configuration() if the image is
> + * opened as part of a configuration, or NULL if the image is opened without a
> + * configuration. If it exists the value will be returned in @address. Otherwise
> + * @address won't be changed.
> + *
> + * Return: 0 for success, negative error code otherwise
> + */
> +int fit_get_image_address(struct fit_handle *handle, void *configuration,
> + const char *name, const char *property,
> + unsigned long *address)
> +{
> + struct device_node *image;
> + const char *unit = name;
> + int ret;
> +
> + if (!address || !property || !name)
> + return -EINVAL;
> +
> + ret = fit_get_image(handle, configuration, &unit, &image);
> + if (ret)
> + return ret;
> +
> + pr_info("%s/%s: ", image->full_name, property);
> +
> + ret = fit_get_address(image, property, address);
> + if (ret < 0)
> + pr_cont("<not found>\n");
> + else
> + pr_cont("0x%lx\n", *address);
> +
> + return ret;
> +}
> +
> /**
> * fit_open_image - Open an image in a FIT image
> * @handle: The FIT image handle
> @@ -539,24 +616,14 @@ int fit_open_image(struct fit_handle *handle, void *configuration,
> unsigned long *outsize)
> {
> struct device_node *image;
> - const char *unit, *type = NULL, *desc= "(no description)";
> + const char *unit = name, *type = NULL, *desc= "(no description)";
> const void *data;
> int data_len;
> int ret = 0;
> - struct device_node *conf_node = configuration;
>
> - if (conf_node) {
> - if (of_property_read_string(conf_node, name, &unit)) {
> - pr_err("No image named '%s'\n", name);
> - return -ENOENT;
> - }
> - } else {
> - unit = name;
> - }
> -
> - image = of_get_child_by_name(handle->images, unit);
> - if (!image)
> - return -ENOENT;
> + ret = fit_get_image(handle, configuration, &unit, &image);
> + if (ret)
> + return ret;
>
> of_property_read_string(image, "description", &desc);
> pr_info("image '%s': '%s'\n", unit, desc);
> @@ -573,7 +640,7 @@ int fit_open_image(struct fit_handle *handle, void *configuration,
> return -EINVAL;
> }
>
> - if (conf_node)
> + if (configuration)
> ret = fit_verify_hash(handle, image, data, data_len);
> else
> ret = fit_image_verify_signature(handle, image, data, data_len);
> diff --git a/include/image-fit.h b/include/image-fit.h
> index 27c9e8351..f21545988 100644
> --- a/include/image-fit.h
> +++ b/include/image-fit.h
> @@ -32,6 +32,9 @@ int fit_has_image(struct fit_handle *handle, void *configuration,
> int fit_open_image(struct fit_handle *handle, void *configuration,
> const char *name, const void **outdata,
> unsigned long *outsize);
> +int fit_get_image_address(struct fit_handle *handle, void *configuration,
> + const char *name, const char *property,
> + unsigned long *address);
>
> void fit_close(struct fit_handle *handle);
>
>
--
--------------------------------------------
embedded brains GmbH
Herr Christian Mauderer
Dornierstr. 4
D-82178 Puchheim
Germany
email: christian.mauderer@embedded-brains.de
Phone: +49-89-18 94 741 - 18
Fax: +49-89-18 94 741 - 08
PGP: Public key available on request.
Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-07-28 13:57 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-15 9:26 Christian Mauderer
2020-07-28 13:57 ` Christian Mauderer [this message]
2020-07-29 17:23 ` Ahmad Fatoum
2020-07-30 5:31 ` Christian Mauderer
2020-08-11 7:57 ` Sascha Hauer
2020-08-12 6:47 ` Christian Mauderer
2020-08-12 10:08 ` Sascha Hauer
2020-08-12 11:01 ` Christian Mauderer
2020-08-12 12:32 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=09d1bc99-aaa0-0b5b-5e98-e0bfbde8fb7b@embedded-brains.de \
--to=christian.mauderer@embedded-brains.de \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox