mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Oleksij Rempel <linux@rempel-privat.de>
To: Michael Tretter <m.tretter@pengutronix.de>, barebox@lists.infradead.org
Subject: Re: [PATCH 3/3] ARM: zynqmp: add support for Xilinx ZCU104 board
Date: Fri, 23 Nov 2018 16:08:18 +0100	[thread overview]
Message-ID: <0b334e3e-2175-7371-890a-9bc6228dddc9@rempel-privat.de> (raw)
In-Reply-To: <20181123133553.24761-4-m.tretter@pengutronix.de>

Hi Michael,

Am 23.11.18 um 14:35 schrieb Michael Tretter:
> Add support for the Xilinx Zynq Ultrascale+ MPSoC architecture (ZynqMP)
> and the Xilinx ZCU104 board.
> 
> Barebox is booted as BL33 in EL-1 and expects that a BL2 (i.e. the FSBL)
> already took care of initializing the RAM. Also for debug_ll, the UART
> is expected to be already setup correctly.
> 
> Thus, you have to add the Barebox binary to a boot image as described in
> "Chapter 11: Boot and Configuration" of "Zynq Ultrascale+ Device
> Technical Reference Manual".
> 
> The ENTRY_FUNCTION macro cannot be used in aarch64, because aarch64 does
> not specify the __naked__ attribute and gcc add a function prologue to
> the entry function which writes to the stack, but the stack is not set
> up. Thus, the entry has to be implemented in assembly.
> 
> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
> ---
>  arch/arm/Kconfig                              | 14 +++++++
>  arch/arm/Makefile                             |  1 +
>  arch/arm/boards/Makefile                      |  1 +
>  arch/arm/boards/xilinx-zcu104/Makefile        |  2 +
>  arch/arm/boards/xilinx-zcu104/board.c         | 25 ++++++++++++
>  arch/arm/boards/xilinx-zcu104/lowlevel.c      | 30 +++++++++++++++
>  arch/arm/boards/xilinx-zcu104/lowlevel_init.S | 32 ++++++++++++++++
>  arch/arm/configs/zynqmp_defconfig             | 38 +++++++++++++++++++
>  arch/arm/dts/Makefile                         |  1 +
>  arch/arm/mach-zynqmp/Kconfig                  |  9 +++++
>  arch/arm/mach-zynqmp/Makefile                 |  1 +
>  arch/arm/mach-zynqmp/include/mach/debug_ll.h  | 30 +++++++++++++++
>  arch/arm/mach-zynqmp/zynqmp.c                 | 22 +++++++++++
>  images/Makefile                               |  1 +
>  images/Makefile.zynqmp                        |  7 ++++
>  15 files changed, 214 insertions(+)
>  create mode 100644 arch/arm/boards/xilinx-zcu104/Makefile
>  create mode 100644 arch/arm/boards/xilinx-zcu104/board.c
>  create mode 100644 arch/arm/boards/xilinx-zcu104/lowlevel.c
>  create mode 100644 arch/arm/boards/xilinx-zcu104/lowlevel_init.S
>  create mode 100644 arch/arm/configs/zynqmp_defconfig
>  create mode 100644 arch/arm/mach-zynqmp/Kconfig
>  create mode 100644 arch/arm/mach-zynqmp/Makefile
>  create mode 100644 arch/arm/mach-zynqmp/include/mach/debug_ll.h
>  create mode 100644 arch/arm/mach-zynqmp/zynqmp.c
>  create mode 100644 images/Makefile.zynqmp
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 3b486f7b8b..842cbb1485 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -245,6 +245,19 @@ config ARCH_ZYNQ
>  	bool "Xilinx Zynq-based boards"
>  	select HAS_DEBUG_LL
>  
> +config ARCH_ZYNQMP
> +	bool "Xilinx ZynqMP-based boards"
> +	select CPU_V8
> +	select HAS_DEBUG_LL
> +	select HAVE_PBL_MULTI_IMAGES
> +	select COMMON_CLK
> +	select COMMON_CLK_OF_PROVIDER
> +	select CLKDEV_LOOKUP
> +	select OFDEVICE
> +	select OFTREE
> +	select RELOCATABLE
> +	select SYS_SUPPORTS_64BIT_KERNEL
> +
>  config ARCH_QEMU
>  	bool "ARM QEMU boards"
>  	select HAS_DEBUG_LL
> @@ -275,6 +288,7 @@ source arch/arm/mach-tegra/Kconfig
>  source arch/arm/mach-uemd/Kconfig
>  source arch/arm/mach-zynq/Kconfig
>  source arch/arm/mach-qemu/Kconfig
> +source arch/arm/mach-zynqmp/Kconfig
>  
>  config ARM_ASM_UNIFIED
>  	bool
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 50958b787f..675d3433cc 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -101,6 +101,7 @@ machine-$(CONFIG_ARCH_VEXPRESS)		:= vexpress
>  machine-$(CONFIG_ARCH_TEGRA)		:= tegra
>  machine-$(CONFIG_ARCH_UEMD)		:= uemd
>  machine-$(CONFIG_ARCH_ZYNQ)		:= zynq
> +machine-$(CONFIG_ARCH_ZYNQMP)		:= zynqmp
>  machine-$(CONFIG_ARCH_QEMU)		:= qemu
>  
>  
> diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> index 3bf176b14d..a15a24c02e 100644
> --- a/arch/arm/boards/Makefile
> +++ b/arch/arm/boards/Makefile
> @@ -153,6 +153,7 @@ obj-$(CONFIG_MACH_VSCOM_BALTOS)			+= vscom-baltos/
>  obj-$(CONFIG_MACH_QEMU_VIRT64)			+= qemu-virt64/
>  obj-$(CONFIG_MACH_WARP7)			+= element14-warp7/
>  obj-$(CONFIG_MACH_VF610_TWR)			+= freescale-vf610-twr/
> +obj-$(CONFIG_MACH_XILINX_ZCU104)		+= xilinx-zcu104/
>  obj-$(CONFIG_MACH_ZII_RDU1)			+= zii-imx51-rdu1/
>  obj-$(CONFIG_MACH_ZII_RDU2)			+= zii-imx6q-rdu2/
>  obj-$(CONFIG_MACH_ZII_VF610_DEV)		+= zii-vf610-dev/
> diff --git a/arch/arm/boards/xilinx-zcu104/Makefile b/arch/arm/boards/xilinx-zcu104/Makefile
> new file mode 100644
> index 0000000000..918615bb76
> --- /dev/null
> +++ b/arch/arm/boards/xilinx-zcu104/Makefile
> @@ -0,0 +1,2 @@
> +obj-y += board.o
> +lwl-y += lowlevel.o lowlevel_init.o
> diff --git a/arch/arm/boards/xilinx-zcu104/board.c b/arch/arm/boards/xilinx-zcu104/board.c
> new file mode 100644
> index 0000000000..090c366e99
> --- /dev/null
> +++ b/arch/arm/boards/xilinx-zcu104/board.c
> @@ -0,0 +1,25 @@
> +/*
> + * Copyright (C) 2018 Michael Tretter <m.tretter@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the Free
> + * Software Foundation; either version 2 of the License, or (at your option)
> + * any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + */

It will be better to start use SPDX-License-Identifier for new files.

> +#include <common.h>
> +#include <init.h>
> +
> +static int zcu104_console_init(void)
> +{> +	barebox_set_model("Xilinx Zynq UltraScale+ MPSoC ZCU104");
> +	barebox_set_hostname("zcu104");

Latest barebox version can extract model and hostname from devicetree.
So, probably we do not need complete board.c file.

> +	return 0;
> +}
> +console_initcall(zcu104_console_init);
> diff --git a/arch/arm/boards/xilinx-zcu104/lowlevel.c b/arch/arm/boards/xilinx-zcu104/lowlevel.c
> new file mode 100644
> index 0000000000..94ce8b1af9
> --- /dev/null
> +++ b/arch/arm/boards/xilinx-zcu104/lowlevel.c
> @@ -0,0 +1,30 @@
> +/*
> + * (c) 2018 Michael Tretter <m.tretter@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the Free
> + * Software Foundation; either version 2 of the License, or (at your option)
> + * any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + */
> +
> +#include <common.h>
> +#include <debug_ll.h>
> +#include <asm/barebox-arm.h>
> +
> +extern char __dtb_zynqmp_zcu104_revA_start[];
> +
> +void zynqmp_zcu104_start(uint32_t, uint32_t, uint32_t);
> +
> +void noinline zynqmp_zcu104_start(uint32_t r0, uint32_t r1, uint32_t r2)
> +{
> +	/* Assume that the first stage boot loader configured the UART */
> +	putc_ll('>');
> +
> +	barebox_arm_entry(0, SZ_2G,
> +			  __dtb_zynqmp_zcu104_revA_start + global_variable_offset());
> +}
> diff --git a/arch/arm/boards/xilinx-zcu104/lowlevel_init.S b/arch/arm/boards/xilinx-zcu104/lowlevel_init.S
> new file mode 100644
> index 0000000000..23f0ee99dd
> --- /dev/null
> +++ b/arch/arm/boards/xilinx-zcu104/lowlevel_init.S
> @@ -0,0 +1,32 @@
> +#include <linux/linkage.h>
> +#include <init.h>
> +#include <asm/barebox-arm-head.h>
> +#include <asm/system.h>
> +
> +#define ENTRY_PROC(name) \
> +	.section .text_head_entry_##name; \
> +	ENTRY(##name); \
> +		b 2f; \
> +		nop; \
> +		nop; \
> +		nop; \
> +		nop; \
> +		nop; \
> +		nop; \
> +		nop; \
> +		.asciz "barebox"; \
> +		.word 0xffffffff; \
> +		.word _barebox_image_size; \
> +		.rept 8; \
> +		.word 0x55555555; \
> +		.endr; \
> +		2:

Is it some thing SoC specific, or we can move it to some generic place?

> +#define ENTRY_PROC_END(name) \
> +	END(##name)
> +
> +ENTRY_PROC(start_zynqmp_zcu104)
> +	mov x0, #0x7ffffff0
> +	mov sp, x0
> +	b zynqmp_zcu104_start
> +ENTRY_PROC_END(start_zynqmp_zcu104)
> diff --git a/arch/arm/configs/zynqmp_defconfig b/arch/arm/configs/zynqmp_defconfig
> new file mode 100644
> index 0000000000..4dea9647fe
> --- /dev/null
> +++ b/arch/arm/configs/zynqmp_defconfig
> @@ -0,0 +1,38 @@
> +CONFIG_ARCH_ZYNQMP=y
> +CONFIG_MACH_XILINX_ZCU104=y
> +CONFIG_MMU=y
> +CONFIG_MALLOC_SIZE=0x0
> +CONFIG_MALLOC_TLSF=y
> +CONFIG_KALLSYMS=y
> +CONFIG_HUSH_FANCY_PROMPT=y
> +CONFIG_CMDLINE_EDITING=y
> +CONFIG_AUTO_COMPLETE=y
> +CONFIG_MENU=y
> +CONFIG_BOOTM_SHOW_TYPE=y
> +CONFIG_BOOTM_VERBOSE=y
> +CONFIG_BOOTM_INITRD=y
> +CONFIG_BOOTM_OFTREE=y
> +CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
> +CONFIG_LONGHELP=y
> +CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_GO=y
> +CONFIG_CMD_RESET=y
> +CONFIG_CMD_PARTITION=y
> +CONFIG_CMD_EXPORT=y
> +CONFIG_CMD_PRINTENV=y
> +CONFIG_CMD_MAGICVAR=y
> +CONFIG_CMD_MAGICVAR_HELP=y
> +CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_LN=y
> +CONFIG_CMD_SLEEP=y
> +CONFIG_CMD_EDIT=y
> +CONFIG_CMD_MENU=y
> +CONFIG_CMD_MENU_MANAGEMENT=y
> +CONFIG_CMD_READLINE=y
> +CONFIG_CMD_TIMEOUT=y
> +CONFIG_CMD_CLK=y
> +CONFIG_CMD_OFTREE=y
> +CONFIG_CMD_TIME=y
> +CONFIG_DRIVER_SERIAL_CADENCE=y
> +# CONFIG_SPI is not set
> +CONFIG_DIGEST=y
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 503d9b18f9..0ac3124c8c 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -119,6 +119,7 @@ pbl-dtb-$(CONFIG_MACH_ZII_VF610_DEV) += \
>  pbl-dtb-$(CONFIG_MACH_AT91SAM9263EK_DT) += at91sam9263ek.dtb.o
>  pbl-dtb-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += at91-microchip-ksz9477-evb.dtb.o
>  pbl-dtb-$(CONFIG_MACH_AT91SAM9X5EK) += at91sam9x5ek.dtb.o
> +pbl-dtb-$(CONFIG_MACH_XILINX_ZCU104) += zynqmp-zcu104-revA.dtb.o
>  
>  pbl-dtb-$(CONFIG_MACH_ZII_IMX7D_RPU2) += imx7d-zii-rpu2.dtb.o
>  
> diff --git a/arch/arm/mach-zynqmp/Kconfig b/arch/arm/mach-zynqmp/Kconfig
> new file mode 100644
> index 0000000000..1c7727d66c
> --- /dev/null
> +++ b/arch/arm/mach-zynqmp/Kconfig
> @@ -0,0 +1,9 @@
> +if ARCH_ZYNQMP
> +
> +config MACH_XILINX_ZCU104
> +	bool "Xilinx Zynq UltraScale+ MPSoC ZCU104"
> +	help
> +	  Say Y here if you are using the Xilinx Zynq UltraScale+ MPSoC ZCU104
> +	  evaluation board.
> +
> +endif
> diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
> new file mode 100644
> index 0000000000..1f4e72abc1
> --- /dev/null
> +++ b/arch/arm/mach-zynqmp/Makefile
> @@ -0,0 +1 @@
> +obj-y += zynqmp.o
> diff --git a/arch/arm/mach-zynqmp/include/mach/debug_ll.h b/arch/arm/mach-zynqmp/include/mach/debug_ll.h
> new file mode 100644
> index 0000000000..cd2583a35b
> --- /dev/null
> +++ b/arch/arm/mach-zynqmp/include/mach/debug_ll.h
> @@ -0,0 +1,30 @@
> +#ifndef __MACH_DEBUG_LL_H__
> +#define __MACH_DEBUG_LL_H__
> +
> +#include <io.h>
> +
> +#define ZYNQMP_UART0_BASE		0xFF000000
> +#define ZYNQMP_UART1_BASE		0xFF010000
> +#define ZYNQMP_UART_BASE		ZYNQMP_UART0_BASE
> +#define ZYNQMP_DEBUG_LL_UART_BASE 	ZYNQMP_UART_BASE
> +
> +#define ZYNQMP_UART_RXTXFIFO	0x30
> +#define ZYNQMP_UART_CHANNEL_STS	0x2C
> +
> +#define ZYNQMP_UART_STS_TFUL	(1 << 4)
> +#define ZYNQMP_UART_TXDIS		(1 << 5)
> +
> +static inline void PUTC_LL(int c)
> +{
> +	void __iomem *base = (void __iomem *)ZYNQMP_DEBUG_LL_UART_BASE;
> +
> +	if (readl(base) & ZYNQMP_UART_TXDIS)
> +		return;
> +
> +	while ((readl(base + ZYNQMP_UART_CHANNEL_STS) & ZYNQMP_UART_STS_TFUL) != 0)
> +		;
> +
> +	writel(c, base + 0x30);
> +}
> +
> +#endif
> diff --git a/arch/arm/mach-zynqmp/zynqmp.c b/arch/arm/mach-zynqmp/zynqmp.c
> new file mode 100644
> index 0000000000..04aedb59e0
> --- /dev/null
> +++ b/arch/arm/mach-zynqmp/zynqmp.c
> @@ -0,0 +1,22 @@
> +/*
> + * (c) 2018 Michael Tretter <m.tretter@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the Free
> + * Software Foundation; either version 2 of the License, or (at your option)
> + * any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + */
> +
> +#include <common.h>
> +#include <init.h>

Do we need it?

> +static int zynqmp_init(void)
> +{
> +	return 0;
> +}
> +postcore_initcall(zynqmp_init);
> diff --git a/images/Makefile b/images/Makefile
> index 5c4d99ac5a..4d28f73a57 100644
> --- a/images/Makefile
> +++ b/images/Makefile
> @@ -113,6 +113,7 @@ include $(srctree)/images/Makefile.socfpga
>  include $(srctree)/images/Makefile.tegra
>  include $(srctree)/images/Makefile.vexpress
>  include $(srctree)/images/Makefile.at91
> +include $(srctree)/images/Makefile.zynqmp
>  
>  targets += $(image-y) pbl.lds barebox.x barebox.z
>  targets += $(patsubst %,%.pblx,$(pblx-y))
> diff --git a/images/Makefile.zynqmp b/images/Makefile.zynqmp
> new file mode 100644
> index 0000000000..f977a6baff
> --- /dev/null
> +++ b/images/Makefile.zynqmp
> @@ -0,0 +1,7 @@
> +#
> +# barebox image generation Makefile for Xilinx Zynq UltraScale+
> +#
> +
> +pblx-$(CONFIG_MACH_XILINX_ZCU104) += start_zynqmp_zcu104
> +FILE_barebox-zynqmp-zcu104.img = start_zynqmp_zcu104.pblx
> +image-$(CONFIG_MACH_XILINX_ZCU104) += barebox-zynqmp-zcu104.img
> 

Sasha posted "ARM: images: Use piggydata" patches. It will be great if
you can test you patches on top of piggy patchset.
-- 
Regards,
Oleksij

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2018-11-23 15:08 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-23 13:35 [PATCH 0/3] Xilinx Zynq Ultrascale+ MPSoC support Michael Tretter
2018-11-23 13:35 ` [PATCH 1/3] ARM: lib64: .gitignore barebox.lds Michael Tretter
2018-11-23 13:35 ` [PATCH 2/3] ARM: aarch64: compile with general-regs-only Michael Tretter
2018-11-23 13:48   ` Rouven Czerwinski
2018-11-23 13:35 ` [PATCH 3/3] ARM: zynqmp: add support for Xilinx ZCU104 board Michael Tretter
2018-11-23 13:55   ` Rouven Czerwinski
2018-11-26 10:37     ` Roland Hieber
2018-11-23 14:38   ` Michael Tretter
2018-11-23 15:08   ` Oleksij Rempel [this message]
2018-11-23 18:27     ` Michael Tretter
2018-11-23 18:41       ` Oleksij Rempel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0b334e3e-2175-7371-890a-9bc6228dddc9@rempel-privat.de \
    --to=linux@rempel-privat.de \
    --cc=barebox@lists.infradead.org \
    --cc=m.tretter@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox