mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: mfe@pengutronix.de
Subject: Re: [PATCH 1/2] of: base: add new barebox,status property
Date: Wed, 21 Jan 2026 12:33:26 +0100	[thread overview]
Message-ID: <0ba89aa4-5ccb-44b0-9cef-6ae4b3a28b75@pengutronix.de> (raw)
In-Reply-To: <20260121113234.1438699-1-a.fatoum@pengutronix.de>

Hi,

sorry missed adding the v2..

On 1/21/26 12:31 PM, Ahmad Fatoum wrote:
> I am confronted with an occasional hang on the Radxa Rock 3A during
> PCI probe. The board has no PCI devices connected.
> 
> This hang doesn't happen in Linux and doesn't happen on the QNAP
> TS433-eU, which is also RK3568, but actually has PCIe devices, which are
> probed normally.
> 
> For such purposes, add a barebox,status property as setting the status
> to disabled, would impact Linux as well if barebox were to pass along
> its own device tree, e.g. when installing the UEFI device tree
> configuration table.
> 
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> v1 -> v2:
>   - rework to make clearer when to use the new property. (Marco)
>   - add example with UEFI device tree configuration table into commit
>     message (Marco)
> ---
>  .../devicetree/bindings/barebox/barebox,status.rst | 14 ++++++++++++++
>  drivers/of/base.c                                  |  4 +++-
>  2 files changed, 17 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/barebox/barebox,status.rst
> 
> diff --git a/Documentation/devicetree/bindings/barebox/barebox,status.rst b/Documentation/devicetree/bindings/barebox/barebox,status.rst
> new file mode 100644
> index 000000000000..03f484cdcfe1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/barebox/barebox,status.rst
> @@ -0,0 +1,14 @@
> +barebox,status property
> +=======================
> +
> +barebox interprets ``barebox,status`` the same as it does ``status``,
> +but gives the barebox-specific property precedence if both exist.
> +
> +The purpose of this property is to keep the ``status`` property of the
> +upstream DT, imported from Linux, untouched.
> +
> +Using ``barebox,status`` may be necessary to temporarily workaround
> +barebox drivers that misbehave on a given board; Disabling the driver
> +may be undesirable if it can handle other instances of the same device
> +on the board or if barebox is being built to support other boards
> +at the same time, where the driver functions correctly.
> diff --git a/drivers/of/base.c b/drivers/of/base.c
> index 54fd458bd9a1..4e83a757a4e9 100644
> --- a/drivers/of/base.c
> +++ b/drivers/of/base.c
> @@ -2149,7 +2149,9 @@ int of_device_is_available(const struct device_node *device)
>  	const char *status;
>  	int statlen;
>  
> -	status = of_get_property(device, "status", &statlen);
> +	status = of_get_property(device, "barebox,status", &statlen);
> +	if (status == NULL)
> +		status = of_get_property(device, "status", &statlen);
>  	if (status == NULL)
>  		return 1;
>  

-- 
Pengutronix e.K.                  |                             |
Steuerwalder Str. 21              | http://www.pengutronix.de/  |
31137 Hildesheim, Germany         | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686  | Fax:   +49-5121-206917-5555 |




  parent reply	other threads:[~2026-01-21 11:33 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-21 11:31 Ahmad Fatoum
2026-01-21 11:31 ` [PATCH 2/2] arm: dts: rk356x: rock3a: disable pcie3x2 Ahmad Fatoum
2026-01-21 12:00   ` Marco Felsch
2026-01-21 11:33 ` Ahmad Fatoum [this message]
2026-01-21 11:59 ` [PATCH 1/2] of: base: add new barebox,status property Marco Felsch
  -- strict thread matches above, loose matches on Subject: below --
2026-01-20 18:13 Ahmad Fatoum
2026-01-21 11:22 ` Marco Felsch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0ba89aa4-5ccb-44b0-9cef-6ae4b3a28b75@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=mfe@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox