Re: [yocto] #yocto bootchooser: Cannot get state 'state'

[Ahmad Fatoum <a.fatoum@pengutronix.de>]

On 1/15/20 2:26 PM, Hans-Ulrich Schlieben wrote:
> Hi Enrico,
> 
> thank you very much for your help. 
> I'm using barebox_2019.01.0-phy4-r7.0 now. In thud I used barebox_2017.12.0
> The image is built using my own ims layer which depends on core-image-minimal
> LAYERDEPENDS_ims-layer = "core-image-minimal openembedded-layer phytec-layer"
> Its using the meta-phytec Layer and a custom layer from phytec named meta-ksp0663.
> Forgot to mention that rauc is used too, which moved from 1.1 to now 1.2.
> Just changed the LAYERSERIES_COMPAT to "zeus" here to check whether yocto zeus works.
> 
> Is there some info what to change in the devicetree and so on when moving to warrior/zeus?

Are there any other error messages?
Can you copy the device tree snippet you use for defining state?
What does running the state command say?

> In thud this worked.
> 
> Thank you
> Regards
> 
> hu
> 
>> -----Original Message-----
>> From: Enrico Joerns <ejo@pengutronix.de> 
>> Sent: Wednesday, 15 January 2020 14:03
>> To: Hans-Ulrich Schlieben <hu.schlieben@codewrights.de>; yocto@lists.yoctoproject.org
>> Cc: barebox@lists.infradead.org
>> Subject: Re: [yocto] #yocto bootchooser: Cannot get state 'state'
>>
>> Hi,
>>
>> this is mainly a barebox-related question, thus I'd suggest asking it on the barebox ML.
>>
>> [cc-ing barebox mailing list]
>>
>> On Wed, 2020-01-15 at 04:10 -0800, hu.schlieben@codewrights.de wrote:
>>> Hi,
>>>
>>> booting the new yocto zeus system manually by "boot mmc" works fine 
>>> but default bootchooser fails with:
>>>
>>> bootchooser: Cannot get state 'state'
>>> Nothing bootable found on 'bootchooser'
>>> Nothing bootable found
>>
>> Looks like the state node is missing in your device tree.
>> Which version of barebox do you use?
>> And from which layer / recipe?
>>
>>> Building the "same" image in yocto thud works fine. The boot variables 
>>> are:
>>>
>>> * BOOT_system0_.default: 3
>>> * BOOT_system1_.default: 3
>>> * allow_color: 0
>>> * autoboot_timeout: 3
>>> * boot.default: bootchooser
>>>   boot.watchdog_timeout: 0
>>>   bootchooser.default_attempts: 3
>>>   bootchooser.default_priority: 1
>>>   bootchooser.disable_on_zero_attempts: 0
>>>   bootchooser.reset_attempts:  (list: "power-on", "all-zero")
>>>   bootchooser.reset_priorities:
>>>   bootchooser.retry: 0
>>> * bootchooser.state_prefix: state.bootstate
>>> * bootchooser.system0.boot: mmc
>>> * bootchooser.system0.default_attempts: 3
>>> * bootchooser.system0.default_priority: 20
>>> * bootchooser.system1.boot: mmc1
>>> * bootchooser.system1.default_attempts: 3
>>> * bootchooser.system1.default_priority: 21
>>> * bootchooser.targets: system0 system1
>>>   bootm.appendroot: 0
>>> ...
>>>
>>
>> Regards, Enrico
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox