mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Eric Benard <eric@eukrea.com>
To: s.hauer@pengutronix.de
Cc: barebox@lists.infradead.org
Subject: [PATCH 4/4] Eukrea CPUIMX27 : add I2C and LP3972 support
Date: Fri, 15 Jan 2010 11:50:19 +0100	[thread overview]
Message-ID: <1263552619-4601-4-git-send-email-eric@eukrea.com> (raw)
In-Reply-To: <1263552619-4601-3-git-send-email-eric@eukrea.com>

This allows to properly setup the voltage on LCD pins at boot.

Signed-off-by: Eric Benard <eric@eukrea.com>
---
 board/eukrea_cpuimx27/eukrea_cpuimx27.c |   29 +++++++++++++++++++++++++++++
 1 files changed, 29 insertions(+), 0 deletions(-)

diff --git a/board/eukrea_cpuimx27/eukrea_cpuimx27.c b/board/eukrea_cpuimx27/eukrea_cpuimx27.c
index 629399f..0908dca 100644
--- a/board/eukrea_cpuimx27/eukrea_cpuimx27.c
+++ b/board/eukrea_cpuimx27/eukrea_cpuimx27.c
@@ -21,6 +21,7 @@
  */
 
 #include <common.h>
+#include <errno.h>
 #include <net.h>
 #include <cfi_flash.h>
 #include <init.h>
@@ -42,6 +43,8 @@
 #include <mach/imx-pll.h>
 #include <ns16550.h>
 #include <asm/mmu.h>
+#include <i2c/i2c.h>
+#include <i2c/lp3972.h>
 
 static struct device_d cfi_dev = {
 	.name     = "cfi_flash",
@@ -140,6 +143,17 @@ static struct device_d quad_uart_serial_device = {
 };
 #endif
 
+static struct i2c_board_info i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("lp3972", 0x34),
+	},
+};
+
+static struct device_d i2c_dev = {
+	.name		= "i2c-imx",
+	.map_base	= IMX_I2C1_BASE,
+};
+
 #ifdef CONFIG_MMU
 static void eukrea_cpuimx27_mmu_init(void)
 {
@@ -187,6 +201,8 @@ static int eukrea_cpuimx27_devices_init(void)
 		PD15_AOUT_FEC_COL,
 		PD16_AIN_FEC_TX_ER,
 		PF23_AIN_FEC_TX_EN,
+		PD17_PF_I2C_DATA,
+		PD18_PF_I2C_CLK,
 #ifdef CONFIG_DRIVER_SERIAL_IMX
 		PE12_PF_UART1_TXD,
 		PE13_PF_UART1_RXD,
@@ -213,6 +229,10 @@ static int eukrea_cpuimx27_devices_init(void)
 	register_device(&nand_dev);
 	register_device(&sdram_dev);
 
+	PCCR0 |= PCCR0_I2C1_EN;
+	i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
+	register_device(&i2c_dev);
+
 	devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self0");
 	devfs_add_partition("nor0", 0x40000, 0x20000, PARTITION_FIXED, "env0");
 	protect_file("/dev/env0", 1);
@@ -257,9 +277,18 @@ console_initcall(eukrea_cpuimx27_console_init);
 
 static int eukrea_cpuimx27_late_init(void)
 {
+	struct i2c_client *client;
+	u8 reg[1];
+
 	console_flush();
 	register_device(&fec_dev);
 
+	client = lp3972_get_client();
+	if (!client)
+		return -ENODEV;
+	reg[0] = 0xa0;
+	i2c_write_reg(client, 0x39, reg, sizeof(reg));
+
 	return 0;
 }
 
-- 
1.6.3.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2010-01-15 10:50 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-01-15 10:50 [PATCH 1/4] eukrea_cpuimx27 : update timings Eric Benard
2010-01-15 10:50 ` [PATCH 2/4] Add necessary clocks & defines to get I2C support for i.MX27 Eric Benard
2010-01-15 10:50   ` [PATCH 3/4] I2C : add NS LP3972 PMIC support Eric Benard
2010-01-15 10:50     ` Eric Benard [this message]
2010-01-16 11:33 ` [PATCH 1/4] eukrea_cpuimx27 : update timings Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1263552619-4601-4-git-send-email-eric@eukrea.com \
    --to=eric@eukrea.com \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox