From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 06/12] add unlzo support
Date: Mon, 29 Mar 2010 11:36:17 +0200 [thread overview]
Message-ID: <1269855383-22716-7-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1269855383-22716-1-git-send-email-s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
commands/Kconfig | 8 ++
commands/Makefile | 1 +
commands/unlzo.c | 69 ++++++++++++
include/lzo.h | 46 ++++++++
lib/Kconfig | 2 +
lib/Makefile | 2 +
lib/decompress_unlzo.c | 199 +++++++++++++++++++++++++++++++++++
lib/lzo/Kconfig | 6 +
lib/lzo/Makefile | 4 +
lib/lzo/lzo1x_compress.c | 226 ++++++++++++++++++++++++++++++++++++++++
lib/lzo/lzo1x_decompress.c | 247 ++++++++++++++++++++++++++++++++++++++++++++
lib/lzo/lzodefs.h | 43 ++++++++
lib/lzo/modules.builtin | 2 +
13 files changed, 855 insertions(+), 0 deletions(-)
create mode 100644 commands/unlzo.c
create mode 100644 include/lzo.h
create mode 100644 lib/decompress_unlzo.c
create mode 100644 lib/lzo/Kconfig
create mode 100644 lib/lzo/Makefile
create mode 100644 lib/lzo/lzo1x_compress.c
create mode 100644 lib/lzo/lzo1x_decompress.c
create mode 100644 lib/lzo/lzodefs.h
create mode 100644 lib/lzo/modules.builtin
diff --git a/commands/Kconfig b/commands/Kconfig
index bb264fc..543ee71 100644
--- a/commands/Kconfig
+++ b/commands/Kconfig
@@ -300,4 +300,12 @@ config CMD_GPIO
include gpio_set_value, gpio_get_value, gpio_direction_input and
gpio_direction_output commands to control gpios.
+config CMD_UNLZO
+ bool
+ select LZO_DECOMPRESS
+ prompt "unlzo"
+ help
+ Say yes here to get the unlzo command. lzo is a fast compression
+ algorithm by Markus Franz Xaver Johannes Oberhumer.
+
endmenu
diff --git a/commands/Makefile b/commands/Makefile
index b32fa05..74b0994 100644
--- a/commands/Makefile
+++ b/commands/Makefile
@@ -47,3 +47,4 @@ obj-$(CONFIG_CMD_INSMOD) += insmod.o
obj-$(CONFIG_CMD_BMP) += bmp.o
obj-$(CONFIG_USB_GADGET_DFU) += dfu.o
obj-$(CONFIG_CMD_GPIO) += gpio.o
+obj-$(CONFIG_CMD_UNLZO) += unlzo.o
diff --git a/commands/unlzo.c b/commands/unlzo.c
new file mode 100644
index 0000000..0b6dd4b
--- /dev/null
+++ b/commands/unlzo.c
@@ -0,0 +1,69 @@
+/*
+ * unlzo.c - uncompress a lzo compressed file
+ *
+ * Copyright (c) 2010 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <fs.h>
+#include <lzo.h>
+
+static int do_unlzo(struct command *cmdtp, int argc, char *argv[])
+{
+ int from, to, ret, retlen;
+
+ if (argc != 3)
+ return COMMAND_ERROR_USAGE;
+
+ from = open(argv[1], O_RDONLY);
+ if (from < 0) {
+ perror("open");
+ return 1;
+ }
+
+ to = open(argv[2], O_WRONLY | O_CREAT);
+ if (to < 0) {
+ perror("open");
+ ret = 1;
+ goto exit_close;
+ }
+
+ ret = unlzo(from, to, &retlen);
+ if (ret)
+ printf("failed to decompress\n");
+
+ close(to);
+exit_close:
+ close(from);
+ return ret;
+}
+
+static const __maybe_unused char cmd_unlzo_help[] =
+"Usage: unlzo <infile> <outfile>\n"
+"Uncompress a lzo compressed file\n";
+
+BAREBOX_CMD_START(unlzo)
+ .cmd = do_unlzo,
+ .usage = "lzop <infile> <outfile>",
+ BAREBOX_CMD_HELP(cmd_unlzo_help)
+BAREBOX_CMD_END
+
diff --git a/include/lzo.h b/include/lzo.h
new file mode 100644
index 0000000..5694985
--- /dev/null
+++ b/include/lzo.h
@@ -0,0 +1,46 @@
+#ifndef __LZO_H__
+#define __LZO_H__
+/*
+ * LZO Public Kernel Interface
+ * A mini subset of the LZO real-time data compression library
+ *
+ * Copyright (C) 1996-2005 Markus F.X.J. Oberhumer <markus@oberhumer.com>
+ *
+ * The full LZO package can be found at:
+ * http://www.oberhumer.com/opensource/lzo/
+ *
+ * Changed for kernel use by:
+ * Nitin Gupta <nitingupta910@gmail.com>
+ * Richard Purdie <rpurdie@openedhand.com>
+ */
+
+#define LZO1X_MEM_COMPRESS (16384 * sizeof(unsigned char *))
+#define LZO1X_1_MEM_COMPRESS LZO1X_MEM_COMPRESS
+
+#define lzo1x_worst_compress(x) ((x) + ((x) / 16) + 64 + 3)
+
+/* This requires 'workmem' of size LZO1X_1_MEM_COMPRESS */
+int lzo1x_1_compress(const unsigned char *src, size_t src_len,
+ unsigned char *dst, size_t *dst_len, void *wrkmem);
+
+/* safe decompression with overrun testing */
+int lzo1x_decompress_safe(const unsigned char *src, size_t src_len,
+ unsigned char *dst, size_t *dst_len);
+
+/*
+ * Return values (< 0 = Error)
+ */
+#define LZO_E_OK 0
+#define LZO_E_ERROR (-1)
+#define LZO_E_OUT_OF_MEMORY (-2)
+#define LZO_E_NOT_COMPRESSIBLE (-3)
+#define LZO_E_INPUT_OVERRUN (-4)
+#define LZO_E_OUTPUT_OVERRUN (-5)
+#define LZO_E_LOOKBEHIND_OVERRUN (-6)
+#define LZO_E_EOF_NOT_FOUND (-7)
+#define LZO_E_INPUT_NOT_CONSUMED (-8)
+#define LZO_E_NOT_YET_IMPLEMENTED (-9)
+
+int unlzo(int in_fd, int out_fd, int *dest_len);
+
+#endif
diff --git a/lib/Kconfig b/lib/Kconfig
index c272078..90cf784 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -13,3 +13,5 @@ config CRC16
config GENERIC_FIND_NEXT_BIT
def_bool n
+source lib/lzo/Kconfig
+
diff --git a/lib/Makefile b/lib/Makefile
index b532690..74f7d82 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -28,3 +28,5 @@ obj-$(CONFIG_GENERIC_FIND_NEXT_BIT) += find_next_bit.o
obj-y += glob.o
obj-y += notifier.o
obj-y += copy_file.o
+obj-y += lzo/
+obj-y += decompress_unlzo.o
diff --git a/lib/decompress_unlzo.c b/lib/decompress_unlzo.c
new file mode 100644
index 0000000..8f9cdcf
--- /dev/null
+++ b/lib/decompress_unlzo.c
@@ -0,0 +1,199 @@
+/*
+ * LZO decompressor for barebox. Code borrowed from the lzo
+ * implementation by Markus Franz Xaver Johannes Oberhumer.
+ *
+ * Linux kernel adaptation:
+ * Copyright (C) 2009
+ * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
+ *
+ * Original code:
+ * Copyright (C) 1996-2005 Markus Franz Xaver Johannes Oberhumer
+ * All Rights Reserved.
+ *
+ * lzop and the LZO library are free software; you can redistribute them
+ * and/or modify them under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Markus F.X.J. Oberhumer
+ * <markus@oberhumer.com>
+ * http://www.oberhumer.com/opensource/lzop/
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <linux/types.h>
+#include <lzo.h>
+#include <errno.h>
+#include <fs.h>
+#include <xfuncs.h>
+
+#include <linux/compiler.h>
+#include <asm/unaligned.h>
+
+static const unsigned char lzop_magic[] = {
+ 0x89, 0x4c, 0x5a, 0x4f, 0x00, 0x0d, 0x0a, 0x1a, 0x0a };
+
+#define LZO_BLOCK_SIZE (256*1024l)
+#define HEADER_HAS_FILTER 0x00000800L
+
+static inline int parse_header(int in_fd)
+{
+ u8 l;
+ u16 version;
+ int ret;
+ unsigned char buf[256]; /* maximum filename length + 1 */
+
+ /* read magic (9), library version (2), 'need to be extracted'
+ * version (2) and method (1)
+ */
+ ret = read(in_fd, buf, 9);
+ if (ret < 0)
+ return ret;
+
+ /* check magic */
+ for (l = 0; l < 9; l++) {
+ if (buf[l] != lzop_magic[l])
+ return -EINVAL;
+ }
+
+ ret = read(in_fd, buf, 4); /* version, lib_version */
+ if (ret < 0)
+ return ret;
+ version = get_unaligned_be16(buf);
+
+ if (version >= 0x0940) {
+ ret = read(in_fd, buf, 2); /* version to extract */
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = read(in_fd, buf, 1); /* method */
+ if (ret < 0)
+ return ret;
+
+ if (version >= 0x0940)
+ read(in_fd, buf, 1); /* level */
+
+ ret = read(in_fd, buf, 4); /* flags */
+ if (ret < 0)
+ return ret;
+
+ if (get_unaligned_be32(buf) & HEADER_HAS_FILTER) {
+ ret = read(in_fd, buf, 4); /* skip filter info */
+ if (ret < 0)
+ return ret;
+ }
+
+ /* skip mode and mtime_low */
+ ret = read(in_fd, buf, 8);
+ if (ret < 0)
+ return ret;
+
+ if (version >= 0x0940) {
+ ret = read(in_fd, buf, 4); /* skip mtime_high */
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = read(in_fd, &l, 1);
+ if (ret < 0)
+ return ret;
+ /* don't care about the file name, and skip checksum */
+ ret = read(in_fd, buf, l + 4);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int unlzo(int in_fd, int out_fd, int *dest_len)
+{
+ u8 r = 0;
+ u32 src_len, dst_len;
+ size_t tmp;
+ u8 *in_buf, *out_buf;
+ int obytes_processed = 0;
+ unsigned char buf[8];
+ int ret;
+
+ if (parse_header(in_fd))
+ return -EINVAL;
+
+ out_buf = xmalloc(LZO_BLOCK_SIZE);
+ in_buf = xmalloc(lzo1x_worst_compress(LZO_BLOCK_SIZE));
+
+ for (;;) {
+ /* read uncompressed block size */
+ ret = read(in_fd, buf, 4);
+ if (ret < 0)
+ goto exit_free;
+ dst_len = get_unaligned_be32(buf);
+
+ /* exit if last block */
+ if (dst_len == 0)
+ break;
+
+ if (dst_len > LZO_BLOCK_SIZE) {
+ printf("dest len longer than block size");
+ goto exit_free;
+ }
+
+ /* read compressed block size, and skip block checksum info */
+ ret = read(in_fd, buf, 8);
+ if (ret < 0)
+ goto exit_free;
+
+ src_len = get_unaligned_be32(buf);
+
+ if (src_len <= 0 || src_len > dst_len) {
+ printf("file corrupted");
+ goto exit_free;
+ }
+ ret = read(in_fd, in_buf, src_len);
+ if (ret < 0)
+ goto exit_free;
+
+ /* decompress */
+ tmp = dst_len;
+ if (src_len < dst_len) {
+ r = lzo1x_decompress_safe((u8 *) in_buf, src_len,
+ out_buf, &tmp);
+ if (r != LZO_E_OK || dst_len != tmp) {
+ printf("Compressed data violation");
+ goto exit_free;
+ }
+ ret = write(out_fd, out_buf, dst_len);
+ if (ret < 0)
+ goto exit_free;
+ } else {
+ if (src_len != dst_len) {
+ printf("Compressed data violation");
+ goto exit_free;
+ }
+ ret = write(out_fd, in_buf, dst_len);
+ if (ret < 0)
+ goto exit_free;
+ }
+
+ obytes_processed += dst_len;
+ }
+
+exit_free:
+ free(in_buf);
+ free(out_buf);
+
+ *dest_len = obytes_processed;
+ return 0;
+}
+
diff --git a/lib/lzo/Kconfig b/lib/lzo/Kconfig
new file mode 100644
index 0000000..4016785
--- /dev/null
+++ b/lib/lzo/Kconfig
@@ -0,0 +1,6 @@
+config LZO_DECOMPRESS
+ bool
+
+config LZO_COMPRESS
+ bool
+
diff --git a/lib/lzo/Makefile b/lib/lzo/Makefile
new file mode 100644
index 0000000..e1a97ae
--- /dev/null
+++ b/lib/lzo/Makefile
@@ -0,0 +1,4 @@
+
+obj-$(CONFIG_LZO_COMPRESS) += lzo1x_compress.o
+obj-$(CONFIG_LZO_DECOMPRESS) += lzo1x_decompress.o
+
diff --git a/lib/lzo/lzo1x_compress.c b/lib/lzo/lzo1x_compress.c
new file mode 100644
index 0000000..a604099
--- /dev/null
+++ b/lib/lzo/lzo1x_compress.c
@@ -0,0 +1,226 @@
+/*
+ * LZO1X Compressor from MiniLZO
+ *
+ * Copyright (C) 1996-2005 Markus F.X.J. Oberhumer <markus@oberhumer.com>
+ *
+ * The full LZO package can be found at:
+ * http://www.oberhumer.com/opensource/lzo/
+ *
+ * Changed for kernel use by:
+ * Nitin Gupta <nitingupta910@gmail.com>
+ * Richard Purdie <rpurdie@openedhand.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/lzo.h>
+#include <asm/unaligned.h>
+#include "lzodefs.h"
+
+static noinline size_t
+_lzo1x_1_do_compress(const unsigned char *in, size_t in_len,
+ unsigned char *out, size_t *out_len, void *wrkmem)
+{
+ const unsigned char * const in_end = in + in_len;
+ const unsigned char * const ip_end = in + in_len - M2_MAX_LEN - 5;
+ const unsigned char ** const dict = wrkmem;
+ const unsigned char *ip = in, *ii = ip;
+ const unsigned char *end, *m, *m_pos;
+ size_t m_off, m_len, dindex;
+ unsigned char *op = out;
+
+ ip += 4;
+
+ for (;;) {
+ dindex = ((size_t)(0x21 * DX3(ip, 5, 5, 6)) >> 5) & D_MASK;
+ m_pos = dict[dindex];
+
+ if (m_pos < in)
+ goto literal;
+
+ if (ip == m_pos || ((size_t)(ip - m_pos) > M4_MAX_OFFSET))
+ goto literal;
+
+ m_off = ip - m_pos;
+ if (m_off <= M2_MAX_OFFSET || m_pos[3] == ip[3])
+ goto try_match;
+
+ dindex = (dindex & (D_MASK & 0x7ff)) ^ (D_HIGH | 0x1f);
+ m_pos = dict[dindex];
+
+ if (m_pos < in)
+ goto literal;
+
+ if (ip == m_pos || ((size_t)(ip - m_pos) > M4_MAX_OFFSET))
+ goto literal;
+
+ m_off = ip - m_pos;
+ if (m_off <= M2_MAX_OFFSET || m_pos[3] == ip[3])
+ goto try_match;
+
+ goto literal;
+
+try_match:
+ if (get_unaligned((const unsigned short *)m_pos)
+ == get_unaligned((const unsigned short *)ip)) {
+ if (likely(m_pos[2] == ip[2]))
+ goto match;
+ }
+
+literal:
+ dict[dindex] = ip;
+ ++ip;
+ if (unlikely(ip >= ip_end))
+ break;
+ continue;
+
+match:
+ dict[dindex] = ip;
+ if (ip != ii) {
+ size_t t = ip - ii;
+
+ if (t <= 3) {
+ op[-2] |= t;
+ } else if (t <= 18) {
+ *op++ = (t - 3);
+ } else {
+ size_t tt = t - 18;
+
+ *op++ = 0;
+ while (tt > 255) {
+ tt -= 255;
+ *op++ = 0;
+ }
+ *op++ = tt;
+ }
+ do {
+ *op++ = *ii++;
+ } while (--t > 0);
+ }
+
+ ip += 3;
+ if (m_pos[3] != *ip++ || m_pos[4] != *ip++
+ || m_pos[5] != *ip++ || m_pos[6] != *ip++
+ || m_pos[7] != *ip++ || m_pos[8] != *ip++) {
+ --ip;
+ m_len = ip - ii;
+
+ if (m_off <= M2_MAX_OFFSET) {
+ m_off -= 1;
+ *op++ = (((m_len - 1) << 5)
+ | ((m_off & 7) << 2));
+ *op++ = (m_off >> 3);
+ } else if (m_off <= M3_MAX_OFFSET) {
+ m_off -= 1;
+ *op++ = (M3_MARKER | (m_len - 2));
+ goto m3_m4_offset;
+ } else {
+ m_off -= 0x4000;
+
+ *op++ = (M4_MARKER | ((m_off & 0x4000) >> 11)
+ | (m_len - 2));
+ goto m3_m4_offset;
+ }
+ } else {
+ end = in_end;
+ m = m_pos + M2_MAX_LEN + 1;
+
+ while (ip < end && *m == *ip) {
+ m++;
+ ip++;
+ }
+ m_len = ip - ii;
+
+ if (m_off <= M3_MAX_OFFSET) {
+ m_off -= 1;
+ if (m_len <= 33) {
+ *op++ = (M3_MARKER | (m_len - 2));
+ } else {
+ m_len -= 33;
+ *op++ = M3_MARKER | 0;
+ goto m3_m4_len;
+ }
+ } else {
+ m_off -= 0x4000;
+ if (m_len <= M4_MAX_LEN) {
+ *op++ = (M4_MARKER
+ | ((m_off & 0x4000) >> 11)
+ | (m_len - 2));
+ } else {
+ m_len -= M4_MAX_LEN;
+ *op++ = (M4_MARKER
+ | ((m_off & 0x4000) >> 11));
+m3_m4_len:
+ while (m_len > 255) {
+ m_len -= 255;
+ *op++ = 0;
+ }
+
+ *op++ = (m_len);
+ }
+ }
+m3_m4_offset:
+ *op++ = ((m_off & 63) << 2);
+ *op++ = (m_off >> 6);
+ }
+
+ ii = ip;
+ if (unlikely(ip >= ip_end))
+ break;
+ }
+
+ *out_len = op - out;
+ return in_end - ii;
+}
+
+int lzo1x_1_compress(const unsigned char *in, size_t in_len, unsigned char *out,
+ size_t *out_len, void *wrkmem)
+{
+ const unsigned char *ii;
+ unsigned char *op = out;
+ size_t t;
+
+ if (unlikely(in_len <= M2_MAX_LEN + 5)) {
+ t = in_len;
+ } else {
+ t = _lzo1x_1_do_compress(in, in_len, op, out_len, wrkmem);
+ op += *out_len;
+ }
+
+ if (t > 0) {
+ ii = in + in_len - t;
+
+ if (op == out && t <= 238) {
+ *op++ = (17 + t);
+ } else if (t <= 3) {
+ op[-2] |= t;
+ } else if (t <= 18) {
+ *op++ = (t - 3);
+ } else {
+ size_t tt = t - 18;
+
+ *op++ = 0;
+ while (tt > 255) {
+ tt -= 255;
+ *op++ = 0;
+ }
+
+ *op++ = tt;
+ }
+ do {
+ *op++ = *ii++;
+ } while (--t > 0);
+ }
+
+ *op++ = M4_MARKER | 1;
+ *op++ = 0;
+ *op++ = 0;
+
+ *out_len = op - out;
+ return LZO_E_OK;
+}
+EXPORT_SYMBOL_GPL(lzo1x_1_compress);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("LZO1X-1 Compressor");
+
diff --git a/lib/lzo/lzo1x_decompress.c b/lib/lzo/lzo1x_decompress.c
new file mode 100644
index 0000000..af94382
--- /dev/null
+++ b/lib/lzo/lzo1x_decompress.c
@@ -0,0 +1,247 @@
+/*
+ * LZO1X Decompressor from MiniLZO
+ *
+ * Copyright (C) 1996-2005 Markus F.X.J. Oberhumer <markus@oberhumer.com>
+ *
+ * The full LZO package can be found at:
+ * http://www.oberhumer.com/opensource/lzo/
+ *
+ * Changed for kernel use by:
+ * Nitin Gupta <nitingupta910@gmail.com>
+ * Richard Purdie <rpurdie@openedhand.com>
+ */
+
+#include <asm/unaligned.h>
+#include <common.h>
+#include <lzo.h>
+#include "lzodefs.h"
+
+#define HAVE_IP(x, ip_end, ip) ((size_t)(ip_end - ip) < (x))
+#define HAVE_OP(x, op_end, op) ((size_t)(op_end - op) < (x))
+#define HAVE_LB(m_pos, out, op) (m_pos < out || m_pos >= op)
+
+#define COPY4(dst, src) \
+ put_unaligned(get_unaligned((const u32 *)(src)), (u32 *)(dst))
+
+int lzo1x_decompress_safe(const unsigned char *in, size_t in_len,
+ unsigned char *out, size_t *out_len)
+{
+ const unsigned char * const ip_end = in + in_len;
+ unsigned char * const op_end = out + *out_len;
+ const unsigned char *ip = in, *m_pos;
+ unsigned char *op = out;
+ size_t t;
+
+ *out_len = 0;
+
+ if (*ip > 17) {
+ t = *ip++ - 17;
+ if (t < 4)
+ goto match_next;
+ if (HAVE_OP(t, op_end, op))
+ goto output_overrun;
+ if (HAVE_IP(t + 1, ip_end, ip))
+ goto input_overrun;
+ do {
+ *op++ = *ip++;
+ } while (--t > 0);
+ goto first_literal_run;
+ }
+
+ while ((ip < ip_end)) {
+ t = *ip++;
+ if (t >= 16)
+ goto match;
+ if (t == 0) {
+ if (HAVE_IP(1, ip_end, ip))
+ goto input_overrun;
+ while (*ip == 0) {
+ t += 255;
+ ip++;
+ if (HAVE_IP(1, ip_end, ip))
+ goto input_overrun;
+ }
+ t += 15 + *ip++;
+ }
+ if (HAVE_OP(t + 3, op_end, op))
+ goto output_overrun;
+ if (HAVE_IP(t + 4, ip_end, ip))
+ goto input_overrun;
+
+ COPY4(op, ip);
+ op += 4;
+ ip += 4;
+ if (--t > 0) {
+ if (t >= 4) {
+ do {
+ COPY4(op, ip);
+ op += 4;
+ ip += 4;
+ t -= 4;
+ } while (t >= 4);
+ if (t > 0) {
+ do {
+ *op++ = *ip++;
+ } while (--t > 0);
+ }
+ } else {
+ do {
+ *op++ = *ip++;
+ } while (--t > 0);
+ }
+ }
+
+first_literal_run:
+ t = *ip++;
+ if (t >= 16)
+ goto match;
+ m_pos = op - (1 + M2_MAX_OFFSET);
+ m_pos -= t >> 2;
+ m_pos -= *ip++ << 2;
+
+ if (HAVE_LB(m_pos, out, op))
+ goto lookbehind_overrun;
+
+ if (HAVE_OP(3, op_end, op))
+ goto output_overrun;
+ *op++ = *m_pos++;
+ *op++ = *m_pos++;
+ *op++ = *m_pos;
+
+ goto match_done;
+
+ do {
+match:
+ if (t >= 64) {
+ m_pos = op - 1;
+ m_pos -= (t >> 2) & 7;
+ m_pos -= *ip++ << 3;
+ t = (t >> 5) - 1;
+ if (HAVE_LB(m_pos, out, op))
+ goto lookbehind_overrun;
+ if (HAVE_OP(t + 3 - 1, op_end, op))
+ goto output_overrun;
+ goto copy_match;
+ } else if (t >= 32) {
+ t &= 31;
+ if (t == 0) {
+ if (HAVE_IP(1, ip_end, ip))
+ goto input_overrun;
+ while (*ip == 0) {
+ t += 255;
+ ip++;
+ if (HAVE_IP(1, ip_end, ip))
+ goto input_overrun;
+ }
+ t += 31 + *ip++;
+ }
+ m_pos = op - 1;
+ m_pos -= get_unaligned_le16(ip) >> 2;
+ ip += 2;
+ } else if (t >= 16) {
+ m_pos = op;
+ m_pos -= (t & 8) << 11;
+
+ t &= 7;
+ if (t == 0) {
+ if (HAVE_IP(1, ip_end, ip))
+ goto input_overrun;
+ while (*ip == 0) {
+ t += 255;
+ ip++;
+ if (HAVE_IP(1, ip_end, ip))
+ goto input_overrun;
+ }
+ t += 7 + *ip++;
+ }
+ m_pos -= get_unaligned_le16(ip) >> 2;
+ ip += 2;
+ if (m_pos == op)
+ goto eof_found;
+ m_pos -= 0x4000;
+ } else {
+ m_pos = op - 1;
+ m_pos -= t >> 2;
+ m_pos -= *ip++ << 2;
+
+ if (HAVE_LB(m_pos, out, op))
+ goto lookbehind_overrun;
+ if (HAVE_OP(2, op_end, op))
+ goto output_overrun;
+
+ *op++ = *m_pos++;
+ *op++ = *m_pos;
+ goto match_done;
+ }
+
+ if (HAVE_LB(m_pos, out, op))
+ goto lookbehind_overrun;
+ if (HAVE_OP(t + 3 - 1, op_end, op))
+ goto output_overrun;
+
+ if (t >= 2 * 4 - (3 - 1) && (op - m_pos) >= 4) {
+ COPY4(op, m_pos);
+ op += 4;
+ m_pos += 4;
+ t -= 4 - (3 - 1);
+ do {
+ COPY4(op, m_pos);
+ op += 4;
+ m_pos += 4;
+ t -= 4;
+ } while (t >= 4);
+ if (t > 0)
+ do {
+ *op++ = *m_pos++;
+ } while (--t > 0);
+ } else {
+copy_match:
+ *op++ = *m_pos++;
+ *op++ = *m_pos++;
+ do {
+ *op++ = *m_pos++;
+ } while (--t > 0);
+ }
+match_done:
+ t = ip[-2] & 3;
+ if (t == 0)
+ break;
+match_next:
+ if (HAVE_OP(t, op_end, op))
+ goto output_overrun;
+ if (HAVE_IP(t + 1, ip_end, ip))
+ goto input_overrun;
+
+ *op++ = *ip++;
+ if (t > 1) {
+ *op++ = *ip++;
+ if (t > 2)
+ *op++ = *ip++;
+ }
+
+ t = *ip++;
+ } while (ip < ip_end);
+ }
+
+ *out_len = op - out;
+ return LZO_E_EOF_NOT_FOUND;
+
+eof_found:
+ *out_len = op - out;
+ return (ip == ip_end ? LZO_E_OK :
+ (ip < ip_end ? LZO_E_INPUT_NOT_CONSUMED : LZO_E_INPUT_OVERRUN));
+input_overrun:
+ *out_len = op - out;
+ return LZO_E_INPUT_OVERRUN;
+
+output_overrun:
+ *out_len = op - out;
+ return LZO_E_OUTPUT_OVERRUN;
+
+lookbehind_overrun:
+ *out_len = op - out;
+ return LZO_E_LOOKBEHIND_OVERRUN;
+}
+
+EXPORT_SYMBOL(lzo1x_decompress_safe);
+
diff --git a/lib/lzo/lzodefs.h b/lib/lzo/lzodefs.h
new file mode 100644
index 0000000..b6d482c
--- /dev/null
+++ b/lib/lzo/lzodefs.h
@@ -0,0 +1,43 @@
+/*
+ * lzodefs.h -- architecture, OS and compiler specific defines
+ *
+ * Copyright (C) 1996-2005 Markus F.X.J. Oberhumer <markus@oberhumer.com>
+ *
+ * The full LZO package can be found at:
+ * http://www.oberhumer.com/opensource/lzo/
+ *
+ * Changed for kernel use by:
+ * Nitin Gupta <nitingupta910@gmail.com>
+ * Richard Purdie <rpurdie@openedhand.com>
+ */
+
+#define LZO_VERSION 0x2020
+#define LZO_VERSION_STRING "2.02"
+#define LZO_VERSION_DATE "Oct 17 2005"
+
+#define M1_MAX_OFFSET 0x0400
+#define M2_MAX_OFFSET 0x0800
+#define M3_MAX_OFFSET 0x4000
+#define M4_MAX_OFFSET 0xbfff
+
+#define M1_MIN_LEN 2
+#define M1_MAX_LEN 2
+#define M2_MIN_LEN 3
+#define M2_MAX_LEN 8
+#define M3_MIN_LEN 3
+#define M3_MAX_LEN 33
+#define M4_MIN_LEN 3
+#define M4_MAX_LEN 9
+
+#define M1_MARKER 0
+#define M2_MARKER 64
+#define M3_MARKER 32
+#define M4_MARKER 16
+
+#define D_BITS 14
+#define D_MASK ((1u << D_BITS) - 1)
+#define D_HIGH ((D_MASK >> 1) + 1)
+
+#define DX2(p, s1, s2) (((((size_t)((p)[2]) << (s2)) ^ (p)[1]) \
+ << (s1)) ^ (p)[0])
+#define DX3(p, s1, s2, s3) ((DX2((p)+1, s2, s3) << (s1)) ^ (p)[0])
diff --git a/lib/lzo/modules.builtin b/lib/lzo/modules.builtin
new file mode 100644
index 0000000..d860562
--- /dev/null
+++ b/lib/lzo/modules.builtin
@@ -0,0 +1,2 @@
+kernel/lib/lzo/lzo_compress.ko
+kernel/lib/lzo/lzo_decompress.ko
--
1.7.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2010-03-29 9:37 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-29 9:36 Patches for next merge window Sascha Hauer
2010-03-29 9:36 ` [PATCH 01/12] ARM zImage: do memmap if possible Sascha Hauer
2010-03-29 18:47 ` Peter Korsgaard
2010-03-30 9:20 ` Sascha Hauer
2010-03-30 10:01 ` Peter Korsgaard
2010-03-30 12:18 ` Sascha Hauer
2010-03-29 9:36 ` [PATCH 02/12] nand_imx: use optimized memcpy Sascha Hauer
2010-03-29 9:36 ` [PATCH 03/12] nand_imx: Speed up sequential read Sascha Hauer
2010-03-29 9:36 ` [PATCH 04/12] imx_nand: use memcpy for copying from/to buffer Sascha Hauer
2010-03-29 10:42 ` Ivo Clarysse
2010-03-29 9:36 ` [PATCH 05/12] add unaligned access support Sascha Hauer
2010-03-29 9:36 ` Sascha Hauer [this message]
2010-03-30 11:04 ` [PATCH 06/12] add unlzo support Sascha Hauer
2010-03-29 9:36 ` [PATCH 07/12] add snprintf function Sascha Hauer
2010-03-29 9:36 ` [PATCH 08/12] echo: add -e option support Sascha Hauer
2010-03-30 11:45 ` Peter Korsgaard
2010-03-30 12:17 ` Sascha Hauer
2010-03-29 9:36 ` [PATCH 09/12] add process_escape_sequence function Sascha Hauer
2010-03-29 9:36 ` [PATCH 10/12] echo command: Add -e option Sascha Hauer
2010-03-29 9:36 ` [PATCH 11/12] hush: only remove backslashes introduced from glob Sascha Hauer
2010-03-29 10:00 ` Sascha Hauer
2010-03-29 9:36 ` [PATCH 12/12] hush: allow fancy prompts Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1269855383-22716-7-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox