From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from 68.mail-out.ovh.net ([91.121.185.69]) by bombadil.infradead.org with smtp (Exim 4.72 #1 (Red Hat Linux)) id 1P1WB7-0007xn-Fa for barebox@lists.infradead.org; Fri, 01 Oct 2010 03:20:59 +0000 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 1 Oct 2010 05:19:12 +0200 Message-Id: <1285903152-5840-1-git-send-email-plagnioj@jcrosoft.com> In-Reply-To: <1285567954-1394-1-git-send-email-plagnioj@jcrosoft.com> References: <1285567954-1394-1-git-send-email-plagnioj@jcrosoft.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH v3] MAKEALL: make it generic To: barebox@lists.infradead.org it's allow you to compile specific defconfig or ARCH or all as CROSS_COMPILE=arm-linux- ARCH=arm ./MAKEALL at91sam9263ek_defconfig CROSS_COMPILE=arm-linux- ARCH=arm ./MAKEALL The cross-compiler can be specify via CROSS_COMPILE default CROSS_COMPILE_ arch default CROSS_COMPILE_ deconfig specifc it will be evaluated in the invert order or via config you can specify it via env CONFIG or option -c (overwrite env) CONFIG=./MAKEALL.cfg ARCH=arm ./MAKEALL at91sam9263ek_defconfig CONFIG=./MAKEALL.cfg ARCH=arm ./MAKEALL and for all CONFIG=./MAKEALL.cfg ./MAKEALL you can specify via env or option env option ARCH -a arch CONFIG -c config JOBS -j jobs BUILDDIR -O build dir LOGDIR -l log dir Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- v3: add getopts supports add usage support Best Rebards, J. MAKEALL | 286 ++++++++++++++++++++++++++++++++++++++++++++++++++------------- 1 files changed, 227 insertions(+), 59 deletions(-) diff --git a/MAKEALL b/MAKEALL index dd0f66b..d42be6e 100755 --- a/MAKEALL +++ b/MAKEALL @@ -1,89 +1,257 @@ -#!/bin/bash +#!/bin/sh -check_pipe_status() { - for i in "${PIPESTATUS[@]}"; do - [ $i -gt 0 ] && return 1 - done - return 0 -} +# Print statistics when we exit +trap exit 1 2 3 15 +trap stats 0 +# Keep track of the number of builds and errors +nb_errors=0 +errors_list="" +nb_defconfigs=0 +ret=0 -HERE=$(pwd) -AUTOBUILD_DIR=${HERE}/autobuild -REPORT=${AUTOBUILD_DIR}/REPORT +here=$(pwd) -if [ -d "${AUTOBUILD_DIR}" ]; then - echo "warning: ${AUTOBUILD_DIR} exists, press to exit or wait for 3 seconds" - sleep 3 - rm -fr ${AUTOBUILD_DIR} -fi +time_start=$(date +%s) -mkdir -p ${AUTOBUILD_DIR} +filename=`basename $0` -BOARDS="${BOARDS} sandbox" -sandbox_ARCH=sandbox -sandbox_CROSS_COMPILE= +is_print_stats=1 -BOARDS="${BOARDS} ipe337" -ipe337_ARCH=blackfin -ipe337_CROSS_COMPILE=bfin-elf- +#----------------------------------------------------------------------- -BOARDS="${BOARDS} netx_nxdb500" -netx_nxdb500_ARCH=arm -netx_nxdb500_CROSS_COMPILE=arm-v4t-linux-gnueabi- +usage() { + is_print_stats=0 + echo "Usage: ${filename} [OPTION]..." + echo "Barebox MAKEALL tools." + echo "" + echo "it's allow you to compile specific defconfig or ARCH or all" + echo "as" + echo "" + echo "CROSS_COMPILE=arm-linux- ARCH=arm ./MAKEALL at91sam9263ek_defconfig" + echo "CROSS_COMPILE=arm-linux- ARCH=arm ./MAKEALL" + echo "" + echo "The cross-compiler can be specify via" + echo " CROSS_COMPILE default" + echo " CROSS_COMPILE_ arch default" + echo " CROSS_COMPILE_ deconfig specifc" + echo "" + echo "it will be evaluated in the invert order" + echo "" + echo "or via config" + echo "" + echo "you can specify it via env CONFIG or option -c (overwrite env)" + echo "" + echo "CONFIG=./MAKEALL.cfg ARCH=arm ./MAKEALL at91sam9263ek_defconfig" + echo "CONFIG=./MAKEALL.cfg ARCH=arm ./MAKEALL" + echo "" + echo "and for all" + echo "" + echo "CONFIG=./MAKEALL.cfg ./MAKEALL" + echo "" + echo "you can specify via env or option" + echo "env option" + echo "ARCH -a arch" + echo "CONFIG -c config" + echo "JOBS -j jobs" + echo "BUILDDIR -O build dir" + echo "LOGDIR -l log dir" + echo "" +} -BOARDS="${BOARDS} pcm030" -pcm030_ARCH=ppc -pcm030_CROSS_COMPILE=powerpc-603e-linux-gnu- +stats() { + [ ${is_print_stats} -lt 1 ] && return -BOARDS="${BOARDS} pcm037" -pcm037_ARCH=arm -pcm037_CROSS_COMPILE=arm-1136jfs-linux-gnueabi- + echo "" + echo "--------------------- SUMMARY ----------------------------" + echo "defconfigs compiled: ${nb_defconfigs}" + time_stop=$(date +%s) + time_diff=$((${time_stop} - ${time_start})) + printf "compiled in %4is\n" ${time_diff} + if [ ${nb_errors} -gt 0 ] ; then + echo "defcongids with warnings or errors: ${nb_errors} (${errors_list} )" + fi + echo "----------------------------------------------------------" + + exit ${ret} +} + +check_pipe_status() { + for i in "${PIPESTATUS[@]}" + do + [ $i -gt 0 ] && return 1 + done + return 0 +} -BOARDS="${BOARDS} pcm038" -pcm038_ARCH=arm -pcm038_CROSS_COMPILE=arm-v4t-linux-gnueabi- +do_build_target() { + local arch=$1 + local target=$2 + local target_time_start=$(date +%s) + local log_report="${LOGDIR}/${target}/report.log" + local log_err="${LOGDIR}/${target}/errors.log" -for board in ${BOARDS}; do + rm -rf "${BUILDDIR}" + mkdir -p "${BUILDDIR}" + mkdir -p "${LOGDIR}/${target}" + printf "Building ${arch} ${target} \n" >&2 | tee -a "${log_report}" - time_start=$(date +%s) - arch=${board}_ARCH - cross_compile=${board}_CROSS_COMPILE - mkdir -p ${AUTOBUILD_DIR}/${board} - printf "%-20s defconfig: " ${board} | tee -a ${REPORT} + cross_compile=`eval echo '$CROSS_COMPILE_'${target}` + if [ ! "${cross_compile}" ] + then + cross_compile=`eval echo '$CROSS_COMPILE_'${arch}` + if [ ! "${cross_compile}" ] + then + cross_compile=${CROSS_COMPILE} + fi + fi - make -C ${HERE} \ - O=${AUTOBUILD_DIR}/${board} \ - ARCH=${!arch} \ - ${board}_defconfig \ - > ${AUTOBUILD_DIR}/${board}.log 2>&1 + MAKE="make -C ${here} CROSS_COMPILE=${cross_compile} ARCH=${arch} O=${BUILDDIR}" + ${MAKE} -j${JOBS} ${target} 2>&1 > "${log_report}" | tee "${log_err}" + printf "Configure: " | tee -a "${log_report}" check_pipe_status if [ "$?" = "0" ]; then + printf "OK \n" | tee -a "${log_report}" - printf "OK " | tee -a ${REPORT} - printf "compile: " ${board} | tee -a ${REPORT} + ${MAKE} -j${JOBS} -s 2>&1 >> "${log_report}" | tee -a "${log_err}" - make -C ${HERE} \ - O=${AUTOBUILD_DIR}/${board} \ - ARCH=${!arch} \ - CROSS_COMPILE=${!cross_compile} \ - > ${AUTOBUILD_DIR}/${board}.log 2>&1 + printf "Compile: " ${target} | tee -a "${log_report}" check_pipe_status if [ "$?" = "0" ]; then - printf "OK " | tee -a ${REPORT} + printf "OK \n" | tee -a "${log_report}" + ${cross_compile}size ${BUILDDIR}/barebox | tee -a "${log_report}" else - printf "FAILED " | tee -a ${REPORT} + printf "FAILED \n" | tee -a "${log_report}" + ret=1 fi + else + printf "FAILED \n" | tee -a "${log_report}" + printf "Compile: ------ \n" | tee -a "${log_report}" + ret=1 + fi + if [ -s "${log_err}" ] ; then + nb_errors=$((nb_errors + 1)) + errors_list="${errors_list} ${target}" else - printf "FAILED " | tee -a ${REPORT} - printf "compile: ------ " | tee -a ${REPORT} + rm "${log_err}" fi - time_stop=$(date +%s) - time_diff=$(($time_stop - $time_start)) - printf "%4is\n" $time_diff | tee -a ${REPORT} + nb_defconfigs=$((nb_defconfigs + 1)) + + target_time_stop=$(date +%s) + target_time_diff=$((${target_time_stop} - ${target_time_start})) + printf "Compiled in %4is\n" ${target_time_diff} | tee -a "${log_report}" +} + +do_build() { + local arch=$1 + + for i in arch/${arch}/configs/*_defconfig + do + local target=$(basename $i) + + do_build_target ${arch} ${target} + done +} + +do_build_all() { + local build_target=0 + + for i in arch/* + do + local arch=$(basename $i) + + if [ -d $i ] + then + do_build ${arch} + build_target=$((build_target + 1)) + fi + done + + return $build_target +} + +while getopts "hc:j:O:l:a:" Option +do +case $Option in + a ) + ARCH=${OPTARG} + ;; + c ) + CONFIG=${OPTARG} + ;; + j ) + JOBS=${OPTARG} + ;; + l ) + LOGDIR=${OPTARG} + ;; + O ) + BUILDDIR=${OPTARG} + ;; + h ) + usage + exit 0 + ;; +esac done +shift $((OPTIND - 1)) + +if [ ! "${JOBS}" ] ; then + #linux, BSD, MacOS + nb_cpu=`getconf _NPROCESSORS_ONLN` + + if [ $? -gt 0 ] + then + nb_cpu=1 + fi + + JOBS=$((${nb_cpu} * 2)) +fi + +if [ ! "${LOGDIR}" ] +then + LOGDIR="log" +fi + +if [ ! "${BUILDDIR}" ] +then + BUILDDIR="makeall_builddir" +fi + +if [ "${CONFIG}" ] +then + source "${CONFIG}" +fi + +[ -d "${LOGDIR}" ] || mkdir ${LOGDIR} || exit 1 + +if [ ! "${CONFIG}" ] && [ ! "${CROSS_COMPILE}" ] +then + echo "You need to specify a CONFIG or a CROSS_COMPILE" + usage + exit 1 +fi + +if [ ! "${ARCH}" ] || [ ! -d arch/${ARCH} ] +then + do_build_all + if [ $? -eq 0 ] + then + echo "You need to specify the ARCH or CROSS_COMPILE_ or CROSS_COMPILE_ in your config file" + usage + exit 1 + fi + exit 0 +fi + +if [ $# -eq 0 ] +then + do_build ${ARCH} +else + do_build_target ${ARCH} $1 +fi -- 1.7.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox