[PATCH v2] Add the i.MX23 architecure to barebox

[PATCH v2] Add the i.MX23 architecure to barebox

[Juergen Beisert]

This patch adds the basic support for the i.MX23 architecture. This
CPUs is branded with i.MX, but they are mostly of type STMP378X from SigmaTel.
So, it does not share most of its internal devices with the other i.MX CPUs.
That's why I open a new sub architecture 'mach-stm'.

This is v2 of my patch series to add the i.MX23 architecture. Slightly
modified for easier i.MX28 addition later on. Defconfigs are regenerated.

jbe


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 1/4] Add the basic files for the i.MX23/i.MX28 familiy of CPUs

[Juergen Beisert]

These CPUs are called "i.MX", but they are of type STM378x from SigmaTel. They
do not share any devices with the other i.MX CPUs, so we need a separate
architecute directory to handle them without an ifdef hell in the native i.MX
files.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/Kconfig                             |    5 +
 arch/arm/mach-stm/Kconfig                    |   32 ++
 arch/arm/mach-stm/Makefile                   |    2 +
 arch/arm/mach-stm/clocksource-imx23.c        |   82 +++++
 arch/arm/mach-stm/imx23.c                    |   35 +++
 arch/arm/mach-stm/include/mach/clock.h       |   34 ++
 arch/arm/mach-stm/include/mach/generic.h     |   24 ++
 arch/arm/mach-stm/include/mach/gpio.h        |   29 ++
 arch/arm/mach-stm/include/mach/imx-regs.h    |   27 ++
 arch/arm/mach-stm/include/mach/imx23-regs.h  |   41 +++
 arch/arm/mach-stm/include/mach/iomux-imx23.h |  424 ++++++++++++++++++++++++++
 arch/arm/mach-stm/iomux-imx23.c              |  117 +++++++
 arch/arm/mach-stm/reset-imx23.c              |   61 ++++
 arch/arm/mach-stm/speed-imx23.c              |  280 +++++++++++++++++
 14 files changed, 1193 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-stm/Kconfig
 create mode 100644 arch/arm/mach-stm/Makefile
 create mode 100644 arch/arm/mach-stm/clocksource-imx23.c
 create mode 100644 arch/arm/mach-stm/imx23.c
 create mode 100644 arch/arm/mach-stm/include/mach/clock.h
 create mode 100644 arch/arm/mach-stm/include/mach/generic.h
 create mode 100644 arch/arm/mach-stm/include/mach/gpio.h
 create mode 100644 arch/arm/mach-stm/include/mach/imx-regs.h
 create mode 100644 arch/arm/mach-stm/include/mach/imx23-regs.h
 create mode 100644 arch/arm/mach-stm/include/mach/iomux-imx23.h
 create mode 100644 arch/arm/mach-stm/iomux-imx23.c
 create mode 100644 arch/arm/mach-stm/reset-imx23.c
 create mode 100644 arch/arm/mach-stm/speed-imx23.c

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fa37036..bfee8cf 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -39,6 +39,10 @@ config ARCH_IMX
 	bool "Freescale iMX-based"
 	select GENERIC_GPIO
 
+config ARCH_STM
+	bool "SigmaTel/FSL iMX-based"
+	select GENERIC_GPIO
+
 config ARCH_NETX
 	bool "Hilscher NetX based"
 	select CPU_ARM926T
@@ -62,6 +66,7 @@ source arch/arm/cpu/Kconfig
 source arch/arm/mach-at91/Kconfig
 source arch/arm/mach-ep93xx/Kconfig
 source arch/arm/mach-imx/Kconfig
+source arch/arm/mach-stm/Kconfig
 source arch/arm/mach-netx/Kconfig
 source arch/arm/mach-nomadik/Kconfig
 source arch/arm/mach-omap/Kconfig
diff --git a/arch/arm/mach-stm/Kconfig b/arch/arm/mach-stm/Kconfig
new file mode 100644
index 0000000..9858d3a
--- /dev/null
+++ b/arch/arm/mach-stm/Kconfig
@@ -0,0 +1,32 @@
+if ARCH_STM
+
+config ARCH_TEXT_BASE
+	hex
+
+config BOARDINFO
+
+comment "SigmaTel/Freescale i.MX System-on-Chip"
+
+choice
+	prompt "Freescale i.MX Processor"
+
+config ARCH_IMX23
+	bool "i.MX23"
+	select CPU_ARM926T
+
+endchoice
+
+if ARCH_IMX23
+
+choice
+	prompt "i.MX23 Board Type"
+
+endchoice
+
+endif
+
+menu "Board specific settings       "
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-stm/Makefile b/arch/arm/mach-stm/Makefile
new file mode 100644
index 0000000..59d70b6
--- /dev/null
+++ b/arch/arm/mach-stm/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_ARCH_IMX23) += speed-imx23.o imx23.o iomux-imx23.o clocksource-imx23.o reset-imx23.o
+
diff --git a/arch/arm/mach-stm/clocksource-imx23.c b/arch/arm/mach-stm/clocksource-imx23.c
new file mode 100644
index 0000000..7c0268c
--- /dev/null
+++ b/arch/arm/mach-stm/clocksource-imx23.c
@@ -0,0 +1,82 @@
+/*
+ * (C) Copyright 2010 Juergen Beisert - Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <init.h>
+#include <clock.h>
+#include <notifier.h>
+#include <mach/imx-regs.h>
+#include <mach/clock.h>
+#include <asm/io.h>
+
+#define TIMROTCTRL 0x00
+#define TIMCTRL1 0x40
+#define TIMCTRL1_SET 0x44
+#define TIMCTRL1_CLR 0x48
+#define TIMCTRL1_TOG 0x4c
+# define TIMCTRL_RELOAD (1 << 6)
+# define TIMCTRL_UPDATE (1 << 7)
+# define TIMCTRL_PRESCALE(x) ((x & 0x3) << 4)
+# define TIMCTRL_SELECT(x) (x & 0xf)
+#define TIMCOUNT1 0x50
+
+static const unsigned long timer_base = IMX_TIM1_BASE;
+
+#define CLOCK_TICK_RATE (32000)
+
+static uint64_t imx23_clocksource_read(void)
+{
+	/* only the upper bits are the valid */
+	return ~(readl(timer_base + TIMCOUNT1) >> 16);
+}
+
+static struct clocksource cs = {
+	.read	= imx23_clocksource_read,
+	.mask	= 0x0000ffff,
+	.shift	= 10,
+};
+
+static int imx23_clocksource_clock_change(struct notifier_block *nb, unsigned long event, void *data)
+{
+	cs.mult = clocksource_hz2mult(CLOCK_TICK_RATE/*imx_get_xclk()*/, cs.shift);
+	return 0;
+}
+
+static struct notifier_block imx23_clock_notifier = {
+	.notifier_call = imx23_clocksource_clock_change,
+};
+
+static int clocksource_init(void)
+{
+	/* enable the whole timer block */
+	writel(0x3e000000, timer_base + TIMROTCTRL);
+	/* setup general purpose timer 1 */
+	writel(0x00000000, timer_base + TIMCTRL1);
+	writel(TIMCTRL_UPDATE, timer_base + TIMCTRL1);
+	writel(0x0000ffff, timer_base + TIMCOUNT1);
+
+	writel(TIMCTRL_UPDATE | TIMCTRL_RELOAD | TIMCTRL_PRESCALE(0) | TIMCTRL_SELECT(8), timer_base + TIMCTRL1);
+	cs.mult = clocksource_hz2mult(CLOCK_TICK_RATE/*imx_get_xclk()*/, cs.shift);
+	init_clock(&cs);
+
+	clock_register_client(&imx23_clock_notifier);
+	return 0;
+}
+
+core_initcall(clocksource_init);
diff --git a/arch/arm/mach-stm/imx23.c b/arch/arm/mach-stm/imx23.c
new file mode 100644
index 0000000..14a4249
--- /dev/null
+++ b/arch/arm/mach-stm/imx23.c
@@ -0,0 +1,35 @@
+/*
+ * (C) Copyright 2010 Juergen Beisert - Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+
+extern void imx_dump_clocks(void);
+
+static int do_clocks(struct command *cmdtp, int argc, char *argv[])
+{
+	imx_dump_clocks();
+
+	return 0;
+}
+
+BAREBOX_CMD_START(dump_clocks)
+	.cmd		= do_clocks,
+	.usage		= "show clock frequencies",
+BAREBOX_CMD_END
diff --git a/arch/arm/mach-stm/include/mach/clock.h b/arch/arm/mach-stm/include/mach/clock.h
new file mode 100644
index 0000000..0e1a6d6
--- /dev/null
+++ b/arch/arm/mach-stm/include/mach/clock.h
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2010 Juergen Beisert - Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef ASM_ARCH_CLOCK_IMX23_H
+#define ASM_ARCH_CLOCK_IMX23_H
+
+unsigned imx_get_mpllclk(void);
+unsigned imx_get_emiclk(void);
+unsigned imx_get_ioclk(void);
+unsigned imx_get_armclk(void);
+unsigned imx_get_hclk(void);
+unsigned imx_get_xclk(void);
+unsigned imx_get_sspclk(unsigned);
+unsigned imx_set_sspclk(unsigned, unsigned, int);
+unsigned imx_set_ioclk(unsigned);
+
+#endif /* ASM_ARCH_CLOCK_IMX23_H */
+
diff --git a/arch/arm/mach-stm/include/mach/generic.h b/arch/arm/mach-stm/include/mach/generic.h
new file mode 100644
index 0000000..3a552a8
--- /dev/null
+++ b/arch/arm/mach-stm/include/mach/generic.h
@@ -0,0 +1,24 @@
+/*
+ * (C) Copyright 2010 Juergen Beisert - Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifdef CONFIG_ARCH_IMX23
+# define cpu_is_mx23()	(1)
+#else
+# define cpu_is_mx23()	(0)
+#endif
diff --git a/arch/arm/mach-stm/include/mach/gpio.h b/arch/arm/mach-stm/include/mach/gpio.h
new file mode 100644
index 0000000..fa8263c
--- /dev/null
+++ b/arch/arm/mach-stm/include/mach/gpio.h
@@ -0,0 +1,29 @@
+/*
+ * (C) Copyright 2010 Juergen Beisert - Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_MACH_GPIO_H
+#define __ASM_MACH_GPIO_H
+
+#if defined CONFIG_ARCH_IMX23
+# include <mach/iomux-imx23.h>
+#endif
+
+void imx_gpio_mode(unsigned);
+
+#endif /* __ASM_MACH_GPIO_H */
diff --git a/arch/arm/mach-stm/include/mach/imx-regs.h b/arch/arm/mach-stm/include/mach/imx-regs.h
new file mode 100644
index 0000000..40dc742
--- /dev/null
+++ b/arch/arm/mach-stm/include/mach/imx-regs.h
@@ -0,0 +1,27 @@
+/*
+ * (C) Copyright 2010 Juergen Beisert - Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _IMX_REGS_H
+# define _IMX_REGS_H
+
+#if defined CONFIG_ARCH_IMX23
+# include <mach/imx23-regs.h>
+#endif
+
+#endif /* _IMX_REGS_H */
diff --git a/arch/arm/mach-stm/include/mach/imx23-regs.h b/arch/arm/mach-stm/include/mach/imx23-regs.h
new file mode 100644
index 0000000..89ca453
--- /dev/null
+++ b/arch/arm/mach-stm/include/mach/imx23-regs.h
@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2010 Juergen Beisert - Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MX23_REGS_H
+#define __ASM_ARCH_MX23_REGS_H
+
+/*
+ * sanity check
+ */
+#ifndef _IMX_REGS_H
+# error "Please do not include directly. Use imx-regs.h instead."
+#endif
+
+#define IMX_MEMORY_BASE		0x40000000
+#define IMX_UART1_BASE		0x8006c000
+#define IMX_UART2_BASE		0x8006e000
+#define IMX_DBGUART_BASE	0x80070000
+#define IMX_TIM1_BASE		0x80068000
+#define IMX_IOMUXC_BASE		0x80018000
+#define IMX_WDT_BASE		0x8005c000
+#define IMX_CCM_BASE		0x80040000
+#define IMX_I2C1_BASE		0x80058000
+#define IMX_SSP1_BASE		0x80010000
+#define IMX_SSP2_BASE		0x80034000
+
+#endif /* __ASM_ARCH_MX23_REGS_H */
diff --git a/arch/arm/mach-stm/include/mach/iomux-imx23.h b/arch/arm/mach-stm/include/mach/iomux-imx23.h
new file mode 100644
index 0000000..bebaf56
--- /dev/null
+++ b/arch/arm/mach-stm/include/mach/iomux-imx23.h
@@ -0,0 +1,424 @@
+/*
+ * (C) Copyright 2010 Juergen Beisert - Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+/* 3322222222221111111111
+ * 10987654321098765432109876543210
+ *                              ^^^_ Register Number
+ *                          ^^^^____ Bit offset
+ *                        ^^________ Function
+ *                       ^__________ Drive strength feature present
+ *                      ^___________ Pull up / bit keeper present
+ *                    ^^____________ Drive strength setting
+ *                   ^______________ Pull up / bit keeper setting
+ *                  ^_______________ Voltage select present
+ *                 ^________________ Voltage selection
+ *             ^____________________ direction if enabled as GPIO (1 = output)
+ *            ^_____________________ initial output value if enabled as GPIO and configured as output
+ */
+#ifndef __ASM_MACH_IOMUX_H
+#define __ASM_MACH_IOMUX_H
+
+/* control pad's function */
+#define FBIT_SHIFT (3)
+#define PORTF(bank,bit)	(((bit) << FBIT_SHIFT) | (bank))
+#define GET_PORTF(x) ((x) & 0x7)
+#define GET_FBITPOS(x) (((x) >> FBIT_SHIFT) & 0xf)
+#define GET_GPIO_NO(x) ((GET_PORTF(x) << 4) + GET_FBITPOS(m))
+#define FUNC_SHIFT 7
+#define FUNC(x)	((x) << FUNC_SHIFT)
+#define GET_FUNC(x) (((x) >> FUNC_SHIFT) & 3)
+#define IS_GPIO (3)
+
+/* control pad's GPIO feature if enabled */
+#define GPIO_OUT (1 << 19)
+#define GPIO_VALUE(x) ((x) << 20)
+#define GPIO_IN (0 << 19)
+#define GET_GPIODIR(x) (!!((x) & (1 << 19)))
+#define GET_GPIOVAL(x) (!!((x) & (1 << 20)))
+
+/* control pad's drive strength */
+#define SE (1 << 9)
+#define SE_PRESENT(x) (!!((x) & SE))
+#define STRENGTH(x) ((x) << 11)
+#define S4MA 0	/* used to define a 4 mA drive strength */
+#define S8MA 1	/* used to define a 8 mA drive strength */
+#define S12MA 2	/* used to define a 12 mA drive strength */
+#define S16MA 3	/* used to define a 16 mA drive strength, not all pads can drive this current! */
+#define GET_STRENGTH(x) (((x) >> 11) & 0x3)
+
+/* control pad's pull up / bit keeper feature */
+#define PE (1 << 10)
+#define PE_PRESENT(x) (!!((x) & PE))
+#define PULLUP(x) ((x) << 13)
+#define GET_PULLUP(x) (!!((x) & (1 << 13)))
+
+/* control pad's voltage feature */
+#define VE (1 << 14)
+#define VE_PRESENT(x) (!!((x) & VE))
+#define VE_1_8V (0 << 15)
+#define VE_2_5V (0 << 15) /* don't ask my why, RTFM */
+#define GET_VOLTAGE(x) (!!((x) & (1 << 15)))
+
+/* Bank 0, pins 0 ... 15, GPIO pins 0 ... 15 */
+#define GPMI_D15		(FUNC(0) | PORTF(0, 15) | SE | PE)
+#define GPMI_D15_AUART2_TX	(FUNC(1) | PORTF(0, 15) | SE | PE)
+#define GPMI_D15_GPMI_CE3N	(FUNC(2) | PORTF(0, 15) | SE | PE)
+#define GPMI_D15_GPIO		(FUNC(3) | PORTF(0, 15) | SE | PE)
+#define GPMI_D14		(FUNC(0) | PORTF(0, 14) | SE)
+#define GPMI_D14_AUART2_RX	(FUNC(1) | PORTF(0, 14) | SE)
+#define GPMI_D14_GPIO		(FUNC(3) | PORTF(0, 14) | SE)
+#define GPMI_D13		(FUNC(0) | PORTF(0, 13) | SE)
+#define GPMI_D13_LCD_D23	(FUNC(1) | PORTF(0, 13) | SE)
+#define GPMI_D13_GPIO		(FUNC(3) | PORTF(0, 13) | SE)
+#define GPMI_D12		(FUNC(0) | PORTF(0, 12) | SE)
+#define GPMI_D12_LCD_D22	(FUNC(1) | PORTF(0, 12) | SE)
+#define GPMI_D12_GPIO		(FUNC(3) | PORTF(0, 12) | SE)
+#define GPMI_D11		(FUNC(0) | PORTF(0, 11) | SE | PE)
+#define GPMI_D11_LCD_D21	(FUNC(1) | PORTF(0, 11) | SE | PE)
+#define GPMI_D11_SSP1_D7	(FUNC(2) | PORTF(0, 11) | SE | PE)
+#define GPMI_D11_GPIO		(FUNC(3) | PORTF(0, 11) | SE | PE)
+#define GPMI_D10		(FUNC(0) | PORTF(0, 10) | SE | PE)
+#define GPMI_D10_LCD_D20	(FUNC(1) | PORTF(0, 10) | SE | PE)
+#define GPMI_D10_SSP1_D6	(FUNC(2) | PORTF(0, 10) | SE | PE)
+#define GPMI_D10_GPIO		(FUNC(3) | PORTF(0, 10) | SE | PE)
+#define GPMI_D09		(FUNC(0) | PORTF(0, 9) | SE | PE)
+#define GPMI_D09_LCD_D19	(FUNC(1) | PORTF(0, 9) | SE | PE)
+#define GPMI_D09_SSP1_D5	(FUNC(2) | PORTF(0, 9) | SE | PE)
+#define GPMI_D09_GPIO		(FUNC(3) | PORTF(0, 9) | SE | PE)
+#define GPMI_D08		(FUNC(0) | PORTF(0, 8) | SE | PE)
+#define GPMI_D08_LCD_D18	(FUNC(1) | PORTF(0, 8) | SE | PE)
+#define GPMI_D08_SSP1_D4	(FUNC(2) | PORTF(0, 8) | SE | PE)
+#define GPMI_D08_GPIO		(FUNC(3) | PORTF(0, 8) | SE | PE)
+#define GPMI_D07		(FUNC(0) | PORTF(0, 7) | SE | PE)
+#define GPMI_D07_LCD_D15	(FUNC(1) | PORTF(0, 7) | SE | PE)
+#define GPMI_D07_SSP2_D7	(FUNC(2) | PORTF(0, 7) | SE | PE)
+#define GPMI_D07_GPIO		(FUNC(3) | PORTF(0, 7) | SE | PE)
+#define GPMI_D06		(FUNC(0) | PORTF(0, 6) | SE | PE)
+#define GPMI_D06_LCD_D14	(FUNC(1) | PORTF(0, 6) | SE | PE)
+#define GPMI_D06_SSP2_D6	(FUNC(2) | PORTF(0, 6) | SE | PE)
+#define GPMI_D06_GPIO		(FUNC(3) | PORTF(0, 6) | SE | PE)
+#define GPMI_D05		(FUNC(0) | PORTF(0, 5) | SE | PE)
+#define GPMI_D05_LCD_D13	(FUNC(1) | PORTF(0, 5) | SE | PE)
+#define GPMI_D05_SSP2_D5	(FUNC(2) | PORTF(0, 5) | SE | PE)
+#define GPMI_D05_GPIO		(FUNC(3) | PORTF(0, 5) | SE | PE)
+#define GPMI_D04		(FUNC(0) | PORTF(0, 4) | SE | PE)
+#define GPMI_D04_LCD_D12	(FUNC(1) | PORTF(0, 4) | SE | PE)
+#define GPMI_D04_SSP2_D4	(FUNC(2) | PORTF(0, 4) | SE | PE)
+#define GPMI_D04_GPIO		(FUNC(3) | PORTF(0, 4) | SE | PE)
+#define GPMI_D03		(FUNC(0) | PORTF(0, 3) | SE | PE)
+#define GPMI_D03_LCD_D11	(FUNC(1) | PORTF(0, 3) | SE | PE)
+#define GPMI_D03_SSP2_D3	(FUNC(2) | PORTF(0, 3) | SE | PE)
+#define GPMI_D03_GPIO		(FUNC(3) | PORTF(0, 3) | SE | PE)
+#define GPMI_D02		(FUNC(0) | PORTF(0, 2) | SE | PE)
+#define GPMI_D02_LCD_D10	(FUNC(1) | PORTF(0, 2) | SE | PE)
+#define GPMI_D02_SSP2_D2	(FUNC(2) | PORTF(0, 2) | SE | PE)
+#define GPMI_D02_GPIO		(FUNC(3) | PORTF(0, 2) | SE | PE)
+#define GPMI_D01		(FUNC(0) | PORTF(0, 1) | SE | PE)
+#define GPMI_D01_LCD_D9		(FUNC(1) | PORTF(0, 1) | SE | PE)
+#define GPMI_D01_SSP2_D1	(FUNC(2) | PORTF(0, 1) | SE | PE)
+#define GPMI_D01_GPIO		(FUNC(3) | PORTF(0, 1) | SE | PE)
+#define GPMI_D00		(FUNC(0) | PORTF(0, 0) | SE | PE)
+#define GPMI_D00_LCD_D8		(FUNC(1) | PORTF(0, 0) | SE | PE)
+#define GPMI_D00_SSP2_D0	(FUNC(2) | PORTF(0, 0) | SE | PE)
+#define GPMI_D00_GPIO		(FUNC(3) | PORTF(0, 0) | SE | PE)
+
+/* Bank 0, pins 16 ... 31 GPIO pins 16 ... 31 */
+#define I2C_SDA			(FUNC(0) | PORTF(1, 15) | SE)
+#define I2C_SDA_GPMI_CE2N	(FUNC(1) | PORTF(1, 15) | SE)
+#define I2C_SDA_AUART1_RX	(FUNC(2) | PORTF(1, 15) | SE)
+#define I2C_SDA_GPIO		(FUNC(3) | PORTF(1, 15) | SE)
+#define I2C_CLK			(FUNC(0) | PORTF(1, 14) | SE | PE)
+#define I2C_CLK_GPMI_RDY2	(FUNC(1) | PORTF(1, 14) | SE | PE)
+#define I2C_CLK_AUART1_TX	(FUNC(2) | PORTF(1, 14) | SE | PE)
+#define I2C_CLK_GPIO		(FUNC(3) | PORTF(1, 14) | SE | PE)
+#define AUART1_TX		(FUNC(0) | PORTF(1, 13) | SE | PE)
+#define AUART1_TX_SSP1_D7	(FUNC(2) | PORTF(1, 13) | SE | PE)
+#define AUART1_TX_GPIO		(FUNC(3) | PORTF(1, 13) | SE | PE)
+#define AUART1_RX		(FUNC(0) | PORTF(1, 12) | SE | PE)
+#define AUART1_RX_SSP1_D6	(FUNC(2) | PORTF(1, 12) | SE | PE)
+#define AUART1_RX_GPIO		(FUNC(3) | PORTF(1, 12) | SE | PE)
+#define AUART1_RTS		(FUNC(0) | PORTF(1, 11) | SE | PE)
+#define AUART1_RTS_SSP1_D5	(FUNC(2) | PORTF(1, 11) | SE | PE)
+#define AUART1_RTS_GPIO		(FUNC(3) | PORTF(1, 11) | SE | PE)
+#define AUART1_CTS		(FUNC(0) | PORTF(1, 10) | SE | PE)
+#define AUART1_CTS_SSP1_D4	(FUNC(2) | PORTF(1, 10) | SE | PE)
+#define AUART1_CTS_GPIO		(FUNC(3) | PORTF(1, 10) | SE | PE)
+#define GPMI_RDN		(FUNC(0) | PORTF(1, 9) | SE)
+#define GPMI_RDN_GPIO		(FUNC(3) | PORTF(1, 9) | SE)
+#define GPMI_WRN		(FUNC(0) | PORTF(1, 8) | SE)
+#define GPMI_WRN_SSP2_SCK	(FUNC(2) | PORTF(1, 8) | SE)
+#define GPMI_WRN_GPIO		(FUNC(3) | PORTF(1, 8) | SE)
+#define GPMI_WPM		(FUNC(0) | PORTF(1, 7) | SE)
+#define GPMI_WPM_GPIO		(FUNC(3) | PORTF(1, 7) | SE)
+#define GPMI_RDY3		(FUNC(0) | PORTF(1, 6) | SE | PE)
+#define GPMI_RDY3_GPIO		(FUNC(3) | PORTF(1, 6) | SE | PE)
+#define GPMI_RDY2		(FUNC(0) | PORTF(1, 5) | SE | PE)
+#define GPMI_RDY2_GPIO		(FUNC(3) | PORTF(1, 5) | SE | PE)
+#define GPMI_RDY1		(FUNC(0) | PORTF(1, 4) | SE | PE)
+#define GPMI_RDY1_SSP2_CMD	(FUNC(2) | PORTF(1, 4) | SE | PE)
+#define GPMI_RDY1_GPIO		(FUNC(3) | PORTF(1, 4) | SE | PE)
+#define GPMI_RDY0		(FUNC(0) | PORTF(1, 3) | SE | PE)
+#define GPMI_RDY0_SSP2_DETECT	(FUNC(2) | PORTF(1, 3) | SE | PE)
+#define GPMI_RDY0_GPIO		(FUNC(3) | PORTF(1, 3) | SE | PE)
+#define GPMI_CE2N		(FUNC(0) | PORTF(1, 2) | SE | PE)
+#define GPMI_CE2N_GPIO		(FUNC(3) | PORTF(1, 2) | SE | PE)
+#define GPMI_ALE		(FUNC(0) | PORTF(1, 1) | SE)
+#define GPMI_ALE_LCD_D17	(FUNC(1) | PORTF(1, 1) | SE)
+#define GPMI_ALE_GPIO		(FUNC(3) | PORTF(1, 1) | SE)
+#define GPMI_CLE		(FUNC(0) | PORTF(1, 0) | SE)
+#define GPMI_CLE_LCD_D16	(FUNC(1) | PORTF(1, 1) | SE)
+#define GPMI_CLE_GPIO		(FUNC(3) | PORTF(1, 0) | SE)
+
+/* Bank 1, pins 0 ... 15 GPIO pins 32 ... 47 */
+#define LCD_D15			(FUNC(0) | PORTF(2, 15) | SE)
+#define LCD_D15_ETM_DA7		(FUNC(1) | PORTF(2, 15) | SE)
+#define LCD_D15_SAIF1_SDATA1	(FUNC(2) | PORTF(2, 15) | SE)
+#define LCD_D15_GPIO		(FUNC(3) | PORTF(2, 15) | SE)
+#define LCD_D14			(FUNC(0) | PORTF(2, 14) | SE)
+#define LCD_D14_ETM_DA6		(FUNC(1) | PORTF(2, 14) | SE)
+#define LCD_D14_SAIF1_SDATA2	(FUNC(2) | PORTF(2, 14) | SE)
+#define LCD_D14_GPIO		(FUNC(3) | PORTF(2, 14) | SE)
+#define LCD_D13			(FUNC(0) | PORTF(2, 13) | SE)
+#define LCD_D13_ETM_DA5		(FUNC(1) | PORTF(2, 13) | SE)
+#define LCD_D13_SAIF2_SDATA2	(FUNC(2) | PORTF(2, 13) | SE)
+#define LCD_D13_GPIO		(FUNC(3) | PORTF(2, 13) | SE)
+#define LCD_D12			(FUNC(0) | PORTF(2, 12) | SE)
+#define LCD_D12_ETM_DA4		(FUNC(1) | PORTF(2, 12) | SE)
+#define LCD_D12_SAIF2_SDATA1	(FUNC(2) | PORTF(2, 12) | SE)
+#define LCD_D12_GPIO		(FUNC(3) | PORTF(2, 12) | SE)
+#define LCD_D11			(FUNC(0) | PORTF(2, 11) | SE)
+#define LCD_D11_ETM_DA3		(FUNC(1) | PORTF(2, 11) | SE)
+#define LCD_D11_SAIF_LRCLK	(FUNC(2) | PORTF(2, 11) | SE)
+#define LCD_D11_GPIO		(FUNC(3) | PORTF(2, 11) | SE)
+#define LCD_D10			(FUNC(0) | PORTF(2, 10) | SE)
+#define LCD_D10_ETM_DA2		(FUNC(1) | PORTF(2, 10) | SE)
+#define LCD_D10_SAIF_BITCLK	(FUNC(2) | PORTF(2, 10) | SE)
+#define LCD_D10_GPIO		(FUNC(3) | PORTF(2, 10) | SE)
+#define LCD_D9			(FUNC(0) | PORTF(2, 9) | SE)
+#define LCD_D9_ETM_DA1		(FUNC(1) | PORTF(2, 9) | SE)
+#define LCD_D9_SAIF1_SDATA0	(FUNC(2) | PORTF(2, 9) | SE)
+#define LCD_D9_GPIO		(FUNC(3) | PORTF(2, 9) | SE)
+#define LCD_D8			(FUNC(0) | PORTF(2, 8) | SE)
+#define LCD_D8_ETM_DA0		(FUNC(1) | PORTF(2, 8) | SE)
+#define LCD_D8_SAIF2_SDATA0	(FUNC(2) | PORTF(2, 8) | SE)
+#define LCD_D8_GPIO		(FUNC(3) | PORTF(2, 8) | SE)
+#define LCD_D7			(FUNC(0) | PORTF(2, 7) | SE)
+#define LCD_D7_ETM_DA15		(FUNC(1) | PORTF(2, 7) | SE)
+#define LCD_D7_GPIO		(FUNC(3) | PORTF(2, 7) | SE)
+#define LCD_D6			(FUNC(0) | PORTF(2, 6) | SE)
+#define LCD_D6_ETM_DA14		(FUNC(1) | PORTF(2, 6) | SE)
+#define LCD_D6_GPIO		(FUNC(3) | PORTF(2, 6) | SE)
+#define LCD_D5			(FUNC(0) | PORTF(2, 5) | SE)
+#define LCD_D5_ETM_DA13		(FUNC(1) | PORTF(2, 5) | SE)
+#define LCD_D5_GPIO		(FUNC(3) | PORTF(2, 5) | SE)
+#define LCD_D4			(FUNC(0) | PORTF(2, 4) | SE)
+#define LCD_D4_ETM_DA12		(FUNC(1) | PORTF(2, 4) | SE)
+#define LCD_D4_GPIO		(FUNC(3) | PORTF(2, 4) | SE)
+#define LCD_D3			(FUNC(0) | PORTF(2, 3) | SE)
+#define LCD_D3_ETM_DA11		(FUNC(1) | PORTF(2, 3) | SE)
+#define LCD_D3_GPIO		(FUNC(3) | PORTF(2, 3) | SE)
+#define LCD_D2			(FUNC(0) | PORTF(2, 2) | SE)
+#define LCD_D2_ETM_DA10		(FUNC(1) | PORTF(2, 2) | SE)
+#define LCD_D2_GPIO		(FUNC(3) | PORTF(2, 2) | SE)
+#define LCD_D1			(FUNC(0) | PORTF(2, 1) | SE)
+#define LCD_D1_ETM_DA9		(FUNC(1) | PORTF(2, 1) | SE)
+#define LCD_D1_GPIO		(FUNC(3) | PORTF(2, 1) | SE)
+#define LCD_D0			(FUNC(0) | PORTF(2, 0) | SE)
+#define LCD_D0_ETM_DA8		(FUNC(1) | PORTF(2, 0) | SE)
+#define LCD_D0_GPIO		(FUNC(3) | PORTF(2, 0) | SE)
+
+/* Bank 1, pins 16 ... 30 GPIO pins 48 ... 63 */
+#define PWM4			(FUNC(0) | PORTF(3, 14) | SE)
+#define PWM4_ETM_CLK		(FUNC(1) | PORTF(3, 14) | SE)
+#define PWM4_AUART1_RTS		(FUNC(2) | PORTF(3, 14) | SE)
+#define PWM4_GPIO		(FUNC(3) | PORTF(3, 14) | SE)
+#define PWM3			(FUNC(0) | PORTF(3, 13) | SE)
+#define PWM3_ETM_TCTL		(FUNC(1) | PORTF(3, 13) | SE)
+#define PWM3_AUART1_CTS		(FUNC(2) | PORTF(3, 13) | SE)
+#define PWM3_GPIO		(FUNC(3) | PORTF(3, 13) | SE)
+#define PWM2			(FUNC(0) | PORTF(3, 12) | SE | PE)
+#define PWM2_GPMI_READY3	(FUNC(1) | PORTF(3, 12) | SE | PE)
+#define PWM2_GPIO		(FUNC(3) | PORTF(3, 12) | SE | PE)
+#define PWM1			(FUNC(0) | PORTF(3, 11) | SE)
+#define PWM1_TIMROT2		(FUNC(1) | PORTF(3, 11) | SE)
+#define PWM1_DUART_TX		(FUNC(2) | PORTF(3, 11) | SE)
+#define PWM1_GPIO		(FUNC(3) | PORTF(3, 11) | SE)
+#define PWM0			(FUNC(0) | PORTF(3, 10) | SE)
+#define PWM0_TIMROT1		(FUNC(1) | PORTF(3, 10) | SE)
+#define PWM0_DUART_RX		(FUNC(2) | PORTF(3, 10) | SE)
+#define PWM0_GPIO		(FUNC(3) | PORTF(3, 10) | SE)
+#define LCD_VSYNC		(FUNC(0) | PORTF(3, 9) | SE)
+#define LCD_VSYNC_LCD_BUSY	(FUNC(1) | PORTF(3, 9) | SE)
+#define LCD_VSYNC_GPIO		(FUNC(3) | PORTF(3, 9) | SE)
+#define LCD_HSYNC		(FUNC(0) | PORTF(3, 8) | SE)
+#define LCD_HSYNC_I2C_SD	(FUNC(1) | PORTF(3, 8) | SE)
+#define LCD_HSYNC_GPIO		(FUNC(3) | PORTF(3, 8) | SE)
+#define LCD_ENABE		(FUNC(0) | PORTF(3, 7) | SE)
+#define LCD_ENABE_I2C_CLK	(FUNC(1) | PORTF(3, 7) | SE)
+#define LCD_ENABE_GPIO		(FUNC(3) | PORTF(3, 7) | SE)
+#define LCD_DOTCLOCK		(FUNC(0) | PORTF(3, 6) | SE | PE)
+#define LCD_DOTCLOCK_GPMI_READY3 (FUNC(1) | PORTF(3, 6) | SE | PE)
+#define LCD_DOTCLOCK_GPIO	(FUNC(3) | PORTF(3, 6) | SE | PE)
+#define LCD_CS			(FUNC(0) | PORTF(3, 5) | SE)
+#define LCD_CS_GPIO		(FUNC(3) | PORTF(3, 5) | SE)
+#define LCD_WR			(FUNC(0) | PORTF(3, 4) | SE)
+#define LCD_WR_GPIO		(FUNC(3) | PORTF(3, 4) | SE)
+#define LCD_RS			(FUNC(0) | PORTF(3, 3) | SE)
+#define LCD_RS_ETM_TCLK		(FUNC(1) | PORTF(3, 3) | SE)
+#define LCD_RS_GPIO		(FUNC(3) | PORTF(3, 3) | SE)
+#define LCD_RESET		(FUNC(0) | PORTF(3, 2) | SE | PE)
+#define LCD_RESET_ETM_TCTL	(FUNC(1) | PORTF(3, 2) | SE | PE)
+#define LCD_RESET_GPMI_CE3N	(FUNC(2) | PORTF(3, 2) | SE | PE)
+#define LCD_RESET_GPIO		(FUNC(3) | PORTF(3, 2) | SE | PE)
+#define LCD_D17			(FUNC(0) | PORTF(3, 1) | SE)
+#define LCD_D17_GPIO		(FUNC(3) | PORTF(3, 1) | SE)
+#define LCD_D16			(FUNC(0) | PORTF(3, 0) | SE)
+#define LCD_D16_SAIF_ALT_BITCLK	(FUNC(2) | PORTF(3, 0) | SE)
+#define LCD_D16_GPIO		(FUNC(3) | PORTF(3, 0) | SE)
+
+/* Bank 2, pins 0 ... 15 GPIO pins 64 ... 79 */
+#define EMI_A6			(FUNC(0) | PORTF(4, 15) | SE | VE)
+#define EMI_A6_GPIO		(FUNC(3) | PORTF(4, 15) | SE | VE)
+#define EMI_A5			(FUNC(0) | PORTF(4, 14) | SE | VE)
+#define EMI_A5_GPIO		(FUNC(3) | PORTF(4, 14) | SE | VE)
+#define EMI_A4			(FUNC(0) | PORTF(4, 13) | SE | VE)
+#define EMI_A4_GPIO		(FUNC(3) | PORTF(4, 13) | SE | VE)
+#define EMI_A3			(FUNC(0) | PORTF(4, 12) | SE | VE)
+#define EMI_A3_GPIO		(FUNC(3) | PORTF(4, 12) | SE | VE)
+#define EMI_A2			(FUNC(0) | PORTF(4, 11) | SE | VE)
+#define EMI_A2_GPIO		(FUNC(3) | PORTF(4, 11) | SE | VE)
+#define EMI_A1			(FUNC(0) | PORTF(4, 10) | SE | VE)
+#define EMI_A1_GPIO		(FUNC(3) | PORTF(4, 10) | SE | VE)
+#define EMI_A0			(FUNC(0) | PORTF(4, 9) | SE | VE)
+#define EMI_A0_GPIO		(FUNC(3) | PORTF(4, 9) | SE | VE)
+#define ROTARYB			(FUNC(0) | PORTF(4, 8) | SE | PE)
+#define ROTARYB_AUART2_CTS	(FUNC(1) | PORTF(4, 8) | SE | PE)
+#define ROTARYB_GPMI_CE3N	(FUNC(2) | PORTF(4, 8) | SE | PE)
+#define ROTARYB_GPIO		(FUNC(3) | PORTF(4, 8) | SE | PE)
+#define ROTARYA			(FUNC(0) | PORTF(4, 7) | SE)
+#define ROTARYA_AUART2_RTS	(FUNC(1) | PORTF(4, 7) | SE)
+#define ROTARYA_SPDIF		(FUNC(2) | PORTF(4, 7) | SE)
+#define ROTARYA_GPIO		(FUNC(3) | PORTF(4, 7) | SE)
+#define SSP1_SCK		(FUNC(0) | PORTF(4, 6) | SE)
+#define SSP1_SCK_ALT_JTAG_TRST	(FUNC(2) | PORTF(4, 6) | SE)
+#define SSP1_SCK_GPIO		(FUNC(3) | PORTF(4, 6) | SE)
+#define SSP1_DATA3		(FUNC(0) | PORTF(4, 5) | SE | PE)
+#define SSP1_DATA3_ALT_JTAG_TMS	(FUNC(2) | PORTF(4, 5) | SE | PE)
+#define SSP1_DATA3_GPIO		(FUNC(3) | PORTF(4, 5) | SE | PE)
+#define SSP1_DATA2		(FUNC(0) | PORTF(4, 4) | SE | PE)
+#define SSP1_DATA2_I2C_SD	(FUNC(1) | PORTF(4, 4) | SE | PE)
+#define SSP1_DATA2_ALT_JTAG_RTCK (FUNC(2) | PORTF(4, 4) | SE | PE)
+#define SSP1_DATA2_GPIO		(FUNC(3) | PORTF(4, 4) | SE | PE)
+#define SSP1_DATA1		(FUNC(0) | PORTF(4, 3) | SE | PE)
+#define SSP1_DATA1_I2C_CLK	(FUNC(1) | PORTF(4, 3) | SE | PE)
+#define SSP1_DATA1_ALT_JTAG_TCK	(FUNC(2) | PORTF(4, 3) | SE | PE)
+#define SSP1_DATA1_GPIO		(FUNC(3) | PORTF(4, 3) | SE | PE)
+#define SSP1_DATA0		(FUNC(0) | PORTF(4, 2) | SE | PE)
+#define SSP1_DATA0_ALT_JTAG_TDI	(FUNC(2) | PORTF(4, 2) | SE | PE)
+#define SSP1_DATA0_GPIO		(FUNC(3) | PORTF(4, 2) | SE | PE)
+#define SSP1_DETECT		(FUNC(0) | PORTF(4, 1) | SE | PE)
+#define SSP1_DETECT_GPMI_CE3N	(FUNC(1) | PORTF(4, 1) | SE | PE)
+#define SSP1_DETECT_USB_ID	(FUNC(2) | PORTF(4, 1) | SE | PE)
+#define SSP1_DETECT_GPIO	(FUNC(3) | PORTF(4, 1) | SE | PE)
+#define SSP1_CMD		(FUNC(0) | PORTF(4, 0) | SE | PE)
+#define SSP1_CMD_JTAG_TDO	(FUNC(2) | PORTF(4, 0) | SE | PE)
+#define SSP1_CMD_GPIO		(FUNC(3) | PORTF(4, 0) | SE | PE)
+
+/* Bank 2, pins 16 ... 31 GPIO pins 80 ... 95 */
+#define EMI_WEN			(FUNC(0) | PORTF(5, 15) | SE | VE)
+#define EMI_WEN_GPIO		(FUNC(3) | PORTF(5, 15) | SE | VE)
+#define EMI_RASN		(FUNC(0) | PORTF(5, 14) | SE | VE)
+#define EMI_RASN_GPIO		(FUNC(3) | PORTF(5, 14) | SE | VE)
+#define EMI_CKE			(FUNC(0) | PORTF(5, 13) | SE | VE)
+#define EMI_CKE_GPIO		(FUNC(3) | PORTF(5, 13) | SE | VE)
+#define GPMI_CE0N		(FUNC(0) | PORTF(5, 12) | SE)
+#define GPMI_CE0N_GPIO		(FUNC(3) | PORTF(5, 12) | SE)
+#define GPMI_CE1N		(FUNC(0) | PORTF(5, 11) | SE | PE)
+#define GPMI_CE1N_GPIO		(FUNC(3) | PORTF(5, 11) | SE | PE)
+#define EMI_CE1N		(FUNC(0) | PORTF(5, 10) | SE | VE | PE)
+#define EMI_CE1N_GPIO		(FUNC(3) | PORTF(5, 10) | SE | VE | PE)
+#define EMI_CE0N		(FUNC(0) | PORTF(5, 9) | SE | VE)
+#define EMI_CE0N_GPIO		(FUNC(3) | PORTF(5, 9) | SE | VE)
+#define EMI_CASN		(FUNC(0) | PORTF(5, 8) | SE | VE)
+#define EMI_CASN_GPIO		(FUNC(3) | PORTF(5, 8) | SE | VE)
+#define EMI_BA1			(FUNC(0) | PORTF(5, 7) | SE | VE)
+#define EMI_BA1_GPIO		(FUNC(3) | PORTF(5, 7) | SE | VE)
+#define EMI_BA0			(FUNC(0) | PORTF(5, 6) | SE | VE)
+#define EMI_BA0_GPIO		(FUNC(3) | PORTF(5, 6) | SE | VE)
+#define EMI_A12			(FUNC(0) | PORTF(5, 5) | SE | VE)
+#define EMI_A12_GPIO		(FUNC(3) | PORTF(5, 5) | SE | VE)
+#define EMI_A11			(FUNC(0) | PORTF(5, 4) | SE | VE)
+#define EMI_A11_GPIO		(FUNC(3) | PORTF(5, 4) | SE | VE)
+#define EMI_A10			(FUNC(0) | PORTF(5, 3) | SE | VE)
+#define EMI_A10_GPIO		(FUNC(3) | PORTF(5, 3) | SE | VE)
+#define EMI_A9			(FUNC(0) | PORTF(5, 2) | SE | VE)
+#define EMI_A9_GPIO		(FUNC(3) | PORTF(5, 2) | SE | VE)
+#define EMI_A8			(FUNC(0) | PORTF(5, 1) | SE | VE)
+#define EMI_A8_GPIO		(FUNC(3) | PORTF(5, 1) | SE | VE)
+#define EMI_A7			(FUNC(0) | PORTF(5, 0) | SE | VE)
+#define EMI_A7_GPIO		(FUNC(3) | PORTF(5, 0) | SE | VE)
+
+/* Bank 3, pins 0 ... 15 GPIO pins 96 ... 111 */
+#define EMI_D15			(FUNC(0) | PORTF(6, 15) | SE | VE | PE)
+#define EMI_D15_DISABLED	(FUNC(3) | PORTF(6, 15) | SE | VE | PE)
+#define EMI_D14			(FUNC(0) | PORTF(6, 14) | SE | VE | PE)
+#define EMI_D14_DISABLED	(FUNC(3) | PORTF(6, 14) | SE | VE | PE)
+#define EMI_D13			(FUNC(0) | PORTF(6, 13) | SE | VE | PE)
+#define EMI_D13_DISABLED	(FUNC(3) | PORTF(6, 13) | SE | VE | PE)
+#define EMI_D12			(FUNC(0) | PORTF(6, 12) | SE | VE | PE)
+#define EMI_D12_DISABLED	(FUNC(3) | PORTF(6, 12) | SE | VE | PE)
+#define EMI_D11			(FUNC(0) | PORTF(6, 11) | SE | VE | PE)
+#define EMI_D11_DISABLED	(FUNC(3) | PORTF(6, 11) | SE | VE | PE)
+#define EMI_D10			(FUNC(0) | PORTF(6, 10) | SE | VE | PE)
+#define EMI_D10_DISABLED	(FUNC(3) | PORTF(6, 10) | SE | VE | PE)
+#define EMI_D9			(FUNC(0) | PORTF(6, 9) | SE | VE | PE)
+#define EMI_D9_DISABLED		(FUNC(3) | PORTF(6, 9) | SE | VE | PE)
+#define EMI_D8			(FUNC(0) | PORTF(6, 8) | SE | VE | PE)
+#define EMI_D8_DISABLED		(FUNC(3) | PORTF(6, 8) | SE | VE | PE)
+#define EMI_D7			(FUNC(0) | PORTF(6, 7) | SE | VE | PE)
+#define EMI_D7_DISABLED		(FUNC(3) | PORTF(6, 7) | SE | VE | PE)
+#define EMI_D6			(FUNC(0) | PORTF(6, 6) | SE | VE | PE)
+#define EMI_D6_DISABLED		(FUNC(3) | PORTF(6, 6) | SE | VE | PE)
+#define EMI_D5			(FUNC(0) | PORTF(6, 5) | SE | VE | PE)
+#define EMI_D5_DISABLED		(FUNC(3) | PORTF(6, 5) | SE | VE | PE)
+#define EMI_D4			(FUNC(0) | PORTF(6, 4) | SE | VE | PE)
+#define EMI_D4_DISABLED		(FUNC(3) | PORTF(6, 4) | SE | VE | PE)
+#define EMI_D3			(FUNC(0) | PORTF(6, 3) | SE | VE | PE)
+#define EMI_D3_DISABLED		(FUNC(3) | PORTF(6, 3) | SE | VE | PE)
+#define EMI_D2			(FUNC(0) | PORTF(6, 2) | SE | VE | PE)
+#define EMI_D2_DISABLED		(FUNC(3) | PORTF(6, 2) | SE | VE | PE)
+#define EMI_D1			(FUNC(0) | PORTF(6, 1) | SE | VE | PE)
+#define EMI_D1_DISABLED		(FUNC(3) | PORTF(6, 1) | SE | VE | PE)
+#define EMI_D0			(FUNC(0) | PORTF(6, 0) | SE | VE | PE)
+#define EMI_D0_DISABLED		(FUNC(3) | PORTF(6, 0) | SE | VE | PE)
+
+/* Bank 3, pins 16 ... 21 GPIO pins 112 ... 117 */
+#define EMI_CLKN		(FUNC(0) | PORTF(7, 5) | SE | VE)
+#define EMI_CLKN_DISABLED	(FUNC(3) | PORTF(7, 5) | SE | VE)
+#define EMI_CLK			(FUNC(0) | PORTF(7, 4) | SE | VE)
+#define EMI_CLK_DISABLED	(FUNC(3) | PORTF(7, 4) | SE | VE)
+#define EMI_DQS1		(FUNC(0) | PORTF(7, 3) | SE | VE)
+#define EMI_DQS1_DISABLED	(FUNC(3) | PORTF(7, 3) | SE | VE)
+#define EMI_DQS0		(FUNC(0) | PORTF(7, 2) | SE | VE)
+#define EMI_DQS0_DISABLED	(FUNC(3) | PORTF(7, 2) | SE | VE)
+#define EMI_DQM1		(FUNC(0) | PORTF(7, 1) | SE | VE | PE)
+#define EMI_DQM1_DISABLED	(FUNC(3) | PORTF(7, 1) | SE | VE | PE)
+#define EMI_DQM0		(FUNC(0) | PORTF(7, 0) | SE | VE | PE)
+#define EMI_DQM0_DISABLED	(FUNC(3) | PORTF(7, 0) | SE | VE | PE)
+
+#endif /* __ASM_MACH_IOMUX_H */
diff --git a/arch/arm/mach-stm/iomux-imx23.c b/arch/arm/mach-stm/iomux-imx23.c
new file mode 100644
index 0000000..b0f4046
--- /dev/null
+++ b/arch/arm/mach-stm/iomux-imx23.c
@@ -0,0 +1,117 @@
+/*
+ * (C) Copyright 2010 Juergen Beisert - Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <init.h>
+#include <gpio.h>
+#include <asm/io.h>
+#include <mach/imx-regs.h>
+
+#define HW_PINCTRL_CTRL 0x000
+#define HW_PINCTRL_MUXSEL0 0x100
+#define HW_PINCTRL_DRIVE0 0x200
+#define HW_PINCTRL_PULL0 0x400
+#define HW_PINCTRL_DOUT0 0x500
+#define HW_PINCTRL_DIN0 0x600
+#define HW_PINCTRL_DOE0 0x700
+
+static uint32_t calc_mux_reg(uint32_t no)
+{
+	/* each register controls 16 pads */
+	return ((no >> 4) << 4) + HW_PINCTRL_MUXSEL0;
+}
+
+static uint32_t calc_strength_reg(uint32_t no)
+{
+	/* each register controls 8 pads */
+	return  ((no >> 3) << 4) + HW_PINCTRL_DRIVE0;
+}
+
+static uint32_t calc_pullup_reg(uint32_t no)
+{
+	/* each register controls 32 pads */
+	return  ((no >> 5) << 4) + HW_PINCTRL_PULL0;
+}
+
+static uint32_t calc_output_enable_reg(uint32_t no)
+{
+	/* each register controls 32 pads */
+	return  ((no >> 5) << 4) + HW_PINCTRL_DOE0;
+}
+
+static uint32_t calc_output_reg(uint32_t no)
+{
+	/* each register controls 32 pads */
+	return  ((no >> 5) << 4) + HW_PINCTRL_DOUT0;
+}
+
+/**
+ * @param[in] m One of the defines from iomux-mx23.h to configure *one* pin
+ */
+void imx_gpio_mode(unsigned m)
+{
+	uint32_t reg_offset, gpio_pin, reg;
+
+	gpio_pin = GET_GPIO_NO(m);
+
+	/* configure the pad to its function (always) */
+	reg_offset = calc_mux_reg(gpio_pin);
+	reg = readl(IMX_IOMUXC_BASE + reg_offset) & ~(0x3 << ((gpio_pin % 16) << 1));
+	reg |= GET_FUNC(m) << ((gpio_pin % 16) << 1);
+	writel(reg, IMX_IOMUXC_BASE + reg_offset);
+
+	/* some pins are disabled when configured for GPIO */
+	if ((gpio_pin > 95) && (GET_FUNC(m) == IS_GPIO)) {
+		printf("Cannot configure pad %d to GPIO\n", gpio_pin);
+		return;
+	}
+
+	if (SE_PRESENT(m)) {
+		reg_offset = calc_strength_reg(gpio_pin);
+		reg = readl(IMX_IOMUXC_BASE + reg_offset) & ~(0x3 << ((gpio_pin % 8) << 2));
+		reg |= GET_STRENGTH(m) << ((gpio_pin % 8) << 2);
+		writel(reg, IMX_IOMUXC_BASE + reg_offset);
+	}
+
+	if (VE_PRESENT(m)) {
+		reg_offset = calc_strength_reg(gpio_pin);
+		if (GET_VOLTAGE(m) == 1)
+			writel(0x1 << (((gpio_pin % 8) << 2) + 2), IMX_IOMUXC_BASE + reg_offset + 4);
+		else
+			writel(0x1 << (((gpio_pin % 8) << 2) + 2), IMX_IOMUXC_BASE + reg_offset + 8);
+	}
+
+	if (PE_PRESENT(m)) {
+		reg_offset = calc_pullup_reg(gpio_pin);
+		writel(0x1 << (gpio_pin % 32), IMX_IOMUXC_BASE + reg_offset + (GET_PULLUP(m) == 1 ? 4 : 8));
+	}
+
+	if (GET_FUNC(m) == IS_GPIO) {
+		if (GET_GPIODIR(m) == 1) {
+			/* first set the output value */
+			reg_offset = calc_output_reg(gpio_pin);
+			writel(0x1 << (gpio_pin % 32), IMX_IOMUXC_BASE + reg_offset + (GET_GPIOVAL(m) == 1 ? 4 : 8));
+			/* then the direction */
+			reg_offset = calc_output_enable_reg(gpio_pin);
+			writel(0x1 << (gpio_pin % 32), IMX_IOMUXC_BASE + reg_offset + 4);
+		} else {
+			writel(0x1 << (gpio_pin % 32), IMX_IOMUXC_BASE + reg_offset + 8);
+		}
+	}
+}
diff --git a/arch/arm/mach-stm/reset-imx23.c b/arch/arm/mach-stm/reset-imx23.c
new file mode 100644
index 0000000..db0b3f2
--- /dev/null
+++ b/arch/arm/mach-stm/reset-imx23.c
@@ -0,0 +1,61 @@
+/*
+ * (C) Copyright 2010 Juergen Beisert - Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <init.h>
+#include <notifier.h>
+#include <mach/imx-regs.h>
+#include <asm/io.h>
+
+#define HW_RTC_CTRL     0x000
+# define BM_RTC_CTRL_WATCHDOGEN (1 << 4)
+#define HW_RTC_CTRL_SET 0x004
+#define HW_RTC_CTRL_CLR 0x008
+#define HW_RTC_CTRL_TOG 0x00C
+
+#define HW_RTC_WATCHDOG     0x050
+#define HW_RTC_WATCHDOG_SET 0x054
+#define HW_RTC_WATCHDOG_CLR 0x058
+#define HW_RTC_WATCHDOG_TOG 0x05C
+
+#define WDOG_COUNTER_RATE	1000 /* 1 kHz clock */
+
+#define HW_RTC_PERSISTENT1     0x070
+# define BV_RTC_PERSISTENT1_GENERAL__RTC_FORCE_UPDATER 0x80000000
+#define HW_RTC_PERSISTENT1_SET 0x074
+#define HW_RTC_PERSISTENT1_CLR 0x078
+#define HW_RTC_PERSISTENT1_TOG 0x07C
+
+/*
+ * Reset the cpu by setting up the watchdog timer and let it time out
+ *
+ * TODO There is a much easier way to reset the CPU: Refer bit 2 in
+ *       the HW_CLKCTRL_RESET register, data sheet page 106/4-30
+ */
+void __noreturn reset_cpu (unsigned long ignored)
+{
+	writel(WDOG_COUNTER_RATE, IMX_WDT_BASE + HW_RTC_WATCHDOG);
+	writel(BM_RTC_CTRL_WATCHDOGEN, IMX_WDT_BASE + HW_RTC_CTRL_SET);
+	writel(BV_RTC_PERSISTENT1_GENERAL__RTC_FORCE_UPDATER, IMX_WDT_BASE + HW_RTC_PERSISTENT1);
+
+	while (1)
+		;
+	/*NOTREACHED*/
+}
+EXPORT_SYMBOL(reset_cpu);
diff --git a/arch/arm/mach-stm/speed-imx23.c b/arch/arm/mach-stm/speed-imx23.c
new file mode 100644
index 0000000..7418ad5
--- /dev/null
+++ b/arch/arm/mach-stm/speed-imx23.c
@@ -0,0 +1,280 @@
+/*
+ * (C) Copyright 2010 Juergen Beisert - Pengutronix
+ *
+ * This code is based partially on code of:
+ *
+ * (c) 2008 Embedded Alley Solutions, Inc.
+ * (C) Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/io.h>
+#include <mach/imx-regs.h>
+#include <mach/generic.h>
+#include <mach/clock.h>
+
+/* Note: all clock frequencies are returned in kHz */
+
+#define HW_CLKCTRL_PLLCTRL0 0x000
+#define HW_CLKCTRL_PLLCTRL1 0x010
+#define HW_CLKCTRL_CPU 0x20
+# define GET_CPU_XTAL_DIV(x) (((x) >> 16) & 0x3ff)
+# define GET_CPU_PLL_DIV(x) ((x) & 0x3f)
+#define HW_CLKCTRL_HBUS 0x30
+#define HW_CLKCTRL_XBUS 0x40
+#define HW_CLKCTRL_XTAL 0x050
+#define HW_CLKCTRL_PIX 0x060
+/* note: no set/clear register! */
+#define HW_CLKCTRL_SSP 0x070
+/* note: no set/clear register! */
+# define CLKCTRL_SSP_CLKGATE (1 << 31)
+# define CLKCTRL_SSP_BUSY (1 << 29)
+# define CLKCTRL_SSP_DIV_MASK 0x1ff
+# define GET_SSP_DIV(x) ((x) & CLKCTRL_SSP_DIV_MASK)
+# define SET_SSP_DIV(x) ((x) & CLKCTRL_SSP_DIV_MASK)
+#define HW_CLKCTRL_GPMI 0x080
+/* note: no set/clear register! */
+#define HW_CLKCTRL_SPDIF 0x090
+/* note: no set/clear register! */
+#define HW_CLKCTRL_EMI	0xa0
+/* note: no set/clear register! */
+# define CLKCTRL_EMI_CLKGATE (1 << 31)
+# define GET_EMI_XTAL_DIV(x) (((x) >> 8) & 0xf)
+# define GET_EMI_PLL_DIV(x) ((x) & 0x3f)
+#define HW_CLKCTRL_SAIF 0x0c0
+#define HW_CLKCTRL_TV 0x0d0
+#define HW_CLKCTRL_ETM 0x0e0
+#define HW_CLKCTRL_FRAC 0xf0
+# define CLKCTRL_FRAC_CLKGATEIO (1 << 31)
+# define GET_IOFRAC(x) (((x) >> 24) & 0x3f)
+# define SET_IOFRAC(x) (((x) & 0x3f) << 24)
+# define CLKCTRL_FRAC_CLKGATEPIX (1 << 23)
+# define GET_PIXFRAC(x) (((x) >> 16) & 0x3f)
+# define CLKCTRL_FRAC_CLKGATEEMI (1 << 15)
+# define GET_EMIFRAC(x) (((x) >> 8) & 0x3f)
+# define CLKCTRL_FRAC_CLKGATECPU (1 << 7)
+# define GET_CPUFRAC(x) ((x) & 0x3f)
+#define HW_CLKCTRL_FRAC1 0x100
+#define HW_CLKCTRL_CLKSEQ 0x110
+# define CLKCTRL_CLKSEQ_BYPASS_ETM (1 << 8)
+# define CLKCTRL_CLKSEQ_BYPASS_CPU (1 << 7)
+# define CLKCTRL_CLKSEQ_BYPASS_EMI (1 << 6)
+# define CLKCTRL_CLKSEQ_BYPASS_SSP (1 << 5)
+# define CLKCTRL_CLKSEQ_BYPASS_GPMI (1 << 4)
+#define HW_CLKCTRL_RESET 0x120
+#define HW_CLKCTRL_STATUS 0x130
+#define HW_CLKCTRL_VERSION 0x140
+
+unsigned imx_get_mpllclk(void)
+{
+	/* the main PLL runs at 480 MHz */
+	return 480U * 1000U;
+}
+
+unsigned imx_get_xtalclk(void)
+{
+	/* the external reference runs at 24 MHz */
+	return 24U * 1000U;
+}
+
+/* used for the SDRAM controller */
+unsigned imx_get_emiclk(void)
+{
+	uint32_t reg;
+	unsigned rate;
+
+	if (readl(IMX_CCM_BASE + HW_CLKCTRL_EMI) & CLKCTRL_EMI_CLKGATE)
+		return 0U;	/* clock is off */
+
+	if (readl(IMX_CCM_BASE + HW_CLKCTRL_CLKSEQ) & CLKCTRL_CLKSEQ_BYPASS_EMI)
+		return imx_get_xtalclk() / GET_EMI_XTAL_DIV(readl(IMX_CCM_BASE + HW_CLKCTRL_EMI));
+
+	rate = imx_get_mpllclk();
+	reg = readl(IMX_CCM_BASE + HW_CLKCTRL_FRAC);
+	if (!(reg & CLKCTRL_FRAC_CLKGATEEMI)) {
+		rate *= 18U;
+		rate /= GET_EMIFRAC(reg);
+	}
+
+	return rate / GET_EMI_PLL_DIV(readl(IMX_CCM_BASE + HW_CLKCTRL_EMI));
+}
+
+/*
+ * Source of ssp, gpmi, ir
+ */
+unsigned imx_get_ioclk(void)
+{
+	uint32_t reg;
+	unsigned rate = imx_get_mpllclk();
+
+	reg = readl(IMX_CCM_BASE + HW_CLKCTRL_FRAC);
+	if (reg & CLKCTRL_FRAC_CLKGATEIO)
+		return 0U;	/* clock is off */
+
+	rate *= 18U;
+	rate /= GET_IOFRAC(reg);
+	return rate;
+}
+
+/**
+ * Setup a new frequency to the IOCLK domain.
+ * @param nc New frequency in [kHz]
+ *
+ * The FRAC divider for the IOCLK must be between 18 (* 18/18) and 35 (* 18/35)
+ */
+unsigned imx_set_ioclk(unsigned nc)
+{
+	uint32_t reg;
+	unsigned div;
+
+	div = imx_get_mpllclk();
+	div *= 18U;
+	div += nc >> 1;
+	div /= nc;
+	if (div > 0x3f)
+		div = 0x3f;
+	/* mask the current settings */
+	reg = readl(IMX_CCM_BASE + HW_CLKCTRL_FRAC) & ~(SET_IOFRAC(0x3f));
+	writel(reg | SET_IOFRAC(div), IMX_CCM_BASE + HW_CLKCTRL_FRAC);
+	/* enable the IO clock at its new frequency */
+	writel(CLKCTRL_FRAC_CLKGATEIO, IMX_CCM_BASE + HW_CLKCTRL_FRAC + 8);
+
+	return imx_get_ioclk();
+}
+
+/* this is CPU core clock */
+unsigned imx_get_armclk(void)
+{
+	uint32_t reg;
+	unsigned rate;
+
+	if (readl(IMX_CCM_BASE + HW_CLKCTRL_CLKSEQ) & CLKCTRL_CLKSEQ_BYPASS_CPU)
+		return imx_get_xtalclk() / GET_CPU_XTAL_DIV(readl(IMX_CCM_BASE + HW_CLKCTRL_CPU));
+
+	reg = readl(IMX_CCM_BASE + HW_CLKCTRL_FRAC);
+	if (reg & CLKCTRL_FRAC_CLKGATECPU)
+		return 0U;	/* should not possible, shouldn't it? */
+
+	rate = imx_get_mpllclk();
+	rate *= 18U;
+	rate /= GET_CPUFRAC(reg);
+
+	return rate / GET_CPU_PLL_DIV(readl(IMX_CCM_BASE + HW_CLKCTRL_CPU));
+}
+
+/* this is the AHB and APBH bus clock */
+unsigned imx_get_hclk(void)
+{
+	unsigned rate = imx_get_armclk();
+
+	if (readl(IMX_CCM_BASE + HW_CLKCTRL_HBUS) & 0x20) {
+		rate *= readl(IMX_CCM_BASE + HW_CLKCTRL_HBUS) & 0x1f;
+		rate >>= 5U; /* / 32 */
+	} else
+		rate /= readl(IMX_CCM_BASE + HW_CLKCTRL_HBUS) & 0x1f;
+	return rate;
+}
+
+/*
+ * Source of UART, debug UART, audio, PWM, dri, timer, digctl
+ */
+unsigned imx_get_xclk(void)
+{
+	unsigned rate = imx_get_xtalclk();	/* runs from the 24 MHz crystal reference */
+
+	return rate / (readl(IMX_CCM_BASE + HW_CLKCTRL_XBUS) & 0x3ff);
+}
+
+/* 'index' gets ignored on i.MX23 */
+unsigned imx_get_sspclk(unsigned index)
+{
+	unsigned rate;
+
+	if (readl(IMX_CCM_BASE + HW_CLKCTRL_SSP) & CLKCTRL_SSP_CLKGATE)
+		return 0U;	/* clock is off */
+
+	if (readl(IMX_CCM_BASE + HW_CLKCTRL_CLKSEQ) & CLKCTRL_CLKSEQ_BYPASS_SSP)
+		rate = imx_get_xtalclk();
+	else
+		rate = imx_get_ioclk();
+
+	return rate / GET_SSP_DIV(readl(IMX_CCM_BASE + HW_CLKCTRL_SSP));
+}
+
+/**
+ * @param index Unit index (ignored on i.MX23)
+ * @param nc New frequency in [kHz]
+ * @param high != 0 if ioclk should be the source
+ * @return The new possible frequency in [kHz]
+ */
+unsigned imx_set_sspclk(unsigned index, unsigned nc, int high)
+{
+	uint32_t reg;
+	unsigned ssp_div;
+
+	reg = readl(IMX_CCM_BASE + HW_CLKCTRL_SSP) & ~CLKCTRL_SSP_CLKGATE;
+	/* Datasheet says: Do not change the DIV setting if the clock is off */
+	writel(reg, IMX_CCM_BASE + HW_CLKCTRL_SSP);
+	/* Wait while clock is gated */
+	while (readl(IMX_CCM_BASE + HW_CLKCTRL_SSP) & CLKCTRL_SSP_CLKGATE)
+		;
+
+	if (high)
+		ssp_div = imx_get_ioclk();
+	else
+		ssp_div = imx_get_xtalclk();
+
+	if (nc > ssp_div) {
+		printf("Cannot setup SSP unit clock to %u Hz, base clock is only %u Hz\n", nc, ssp_div);
+		ssp_div = 1U;
+	} else {
+		ssp_div += nc - 1U;
+		ssp_div /= nc;
+		if (ssp_div > CLKCTRL_SSP_DIV_MASK)
+			ssp_div = CLKCTRL_SSP_DIV_MASK;
+	}
+
+	/* Set new divider value */
+	reg = readl(IMX_CCM_BASE + HW_CLKCTRL_SSP) & ~CLKCTRL_SSP_DIV_MASK;
+	writel(reg | SET_SSP_DIV(ssp_div), IMX_CCM_BASE + HW_CLKCTRL_SSP);
+
+	/* Wait until new divider value is set */
+	while (readl(IMX_CCM_BASE + HW_CLKCTRL_SSP) & CLKCTRL_SSP_BUSY)
+		;
+
+	if (high)
+		/* switch to ioclock */
+		writel(CLKCTRL_CLKSEQ_BYPASS_SSP, IMX_CCM_BASE + HW_CLKCTRL_CLKSEQ + 8);
+	else
+		/* switch to 24 MHz crystal */
+		writel(CLKCTRL_CLKSEQ_BYPASS_SSP, IMX_CCM_BASE + HW_CLKCTRL_CLKSEQ + 4);
+
+	return imx_get_sspclk(index);
+}
+
+void imx_dump_clocks(void)
+{
+	printf("mpll:    %10u kHz\n", imx_get_mpllclk());
+	printf("arm:     %10u kHz\n", imx_get_armclk());
+	printf("ioclk:   %10u kHz\n", imx_get_ioclk());
+	printf("emiclk:  %10u kHz\n", imx_get_emiclk());
+	printf("hclk:    %10u kHz\n", imx_get_hclk());
+	printf("xclk:    %10u kHz\n", imx_get_xclk());
+	printf("ssp:     %10u kHz\n", imx_get_sspclk(0));
+}
-- 
1.7.2.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 2/4] Add the driver for the i.MX23 debug UART

[Juergen Beisert]

The i.MX23 comes with a special UART dedicated for debugging purposes. This one
is mostly used for the console the user can reach.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 drivers/serial/Kconfig      |    5 +
 drivers/serial/Makefile     |    1 +
 drivers/serial/stm-serial.c |  202 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 208 insertions(+), 0 deletions(-)
 create mode 100644 drivers/serial/stm-serial.c

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index c7ea2d9..3a8882f 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -18,6 +18,11 @@ config DRIVER_SERIAL_IMX
 	default y
 	bool "i.MX serial driver"
 
+config DRIVER_SERIAL_STM378X
+	depends on ARCH_STM
+	default y
+	bool "i.MX23 serial driver"
+
 config DRIVER_SERIAL_NETX
 	depends on ARCH_NETX
 	default y
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 959290e..9f0e12b 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -7,6 +7,7 @@
 obj-$(CONFIG_DRIVER_SERIAL_ARM_DCC)		+= arm_dcc.o
 obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
 obj-$(CONFIG_DRIVER_SERIAL_IMX)			+= serial_imx.o
+obj-$(CONFIG_DRIVER_SERIAL_STM378X)		+= stm-serial.o
 obj-$(CONFIG_DRIVER_SERIAL_ATMEL)		+= atmel.o
 obj-$(CONFIG_DRIVER_SERIAL_NETX)		+= serial_netx.o
 obj-$(CONFIG_DRIVER_SERIAL_LINUX_COMSOLE)	+= linux_console.o
diff --git a/drivers/serial/stm-serial.c b/drivers/serial/stm-serial.c
new file mode 100644
index 0000000..90563f5
--- /dev/null
+++ b/drivers/serial/stm-serial.c
@@ -0,0 +1,202 @@
+/*
+ * (C) Copyright 2010 Juergen Beisert - Pengutronix
+ *
+ * This code was inspired by some patches made for u-boot covered by:
+ * (c) 2007 Sascha Hauer <s.hauer@pengutronix.de>
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+/*
+ * Note: This is the driver for the debug UART. There is
+ * only one of these UARTs on the Freescale/SigmaTel parts
+ */
+
+#include <common.h>
+#include <init.h>
+#include <notifier.h>
+#include <gpio.h>
+#include <asm/io.h>
+#include <mach/imx-regs.h>
+#include <mach/clock.h>
+
+#define UARTDBGDR 0x00
+#define UARTDBGFR 0x18
+# define TXFF (1 << 5)
+# define RXFE (1 << 4)
+#define UARTDBGIBRD 0x24
+#define UARTDBGFBRD 0x28
+#define UARTDBGLCR_H 0x2c
+# define WLEN8 (3 << 5)
+# define WLEN7 (2 << 5)
+# define WLEN6 (1 << 5)
+# define WLEN5 (0 << 5)
+# define FEN (1 << 4)
+#define UARTDBGCR 0x30
+# define UARTEN (1 << 0)
+# define TXE (1 << 8)
+# define RXE (1 << 9)
+#define UARTDBGIMSC 0x38
+
+struct stm_serial_local {
+	struct console_device cdev;
+	int baudrate;
+	struct notifier_block notify;
+};
+
+static void stm_serial_putc(struct console_device *cdev, char c)
+{
+	struct device_d *dev = cdev->dev;
+
+	/* Wait for room in TX FIFO */
+	while (readl(dev->map_base + UARTDBGFR) & TXFF)
+		;
+
+	writel(c, dev->map_base + UARTDBGDR);
+}
+
+static int stm_serial_tstc(struct console_device *cdev)
+{
+	struct device_d *dev = cdev->dev;
+
+	/* Check if RX FIFO is not empty */
+	return !(readl(dev->map_base + UARTDBGFR) & RXFE);
+}
+
+static int stm_serial_getc(struct console_device *cdev)
+{
+	struct device_d *dev = cdev->dev;
+
+	/* Wait while TX FIFO is empty */
+	while (readl(dev->map_base + UARTDBGFR) & RXFE)
+		;
+
+	return readl(dev->map_base + UARTDBGDR) & 0xff;
+}
+
+static void stm_serial_flush(struct console_device *cdev)
+{
+	struct device_d *dev = cdev->dev;
+
+	/* Wait for TX FIFO empty */
+	while (readl(dev->map_base + UARTDBGFR) & TXFF)
+		;
+}
+
+static int stm_serial_setbaudrate(struct console_device *cdev, int new_baudrate)
+{
+	struct device_d *dev = cdev->dev;
+	struct stm_serial_local *local = container_of(cdev, struct stm_serial_local, cdev);
+	uint32_t cr, lcr_h, quot;
+
+	/* Disable everything */
+	cr = readl(dev->map_base + UARTDBGCR);
+	writel(0, dev->map_base + UARTDBGCR);
+
+	/* Calculate and set baudrate */
+	quot = (imx_get_xclk() * 4000) / new_baudrate;
+	writel(quot & 0x3f, dev->map_base + UARTDBGFBRD);
+	writel(quot >> 6, dev->map_base + UARTDBGIBRD);
+
+	/* Set 8n1 mode, enable FIFOs */
+	lcr_h = WLEN8 | FEN;
+	writel(lcr_h, dev->map_base + UARTDBGLCR_H);
+
+	/* Re-enable debug UART */
+	writel(cr, dev->map_base + UARTDBGCR);
+
+	local->baudrate = new_baudrate;
+
+	return 0;
+}
+
+static int stm_clocksource_clock_change(struct notifier_block *nb, unsigned long event, void *data)
+{
+	struct stm_serial_local *local = container_of(nb, struct stm_serial_local, notify);
+
+	return stm_serial_setbaudrate(&local->cdev, local->baudrate);
+}
+
+static int stm_serial_init_port(struct console_device *cdev)
+{
+	struct device_d *dev = cdev->dev;
+	/*
+	 * If the board specific file registers this console we should force
+	 * the usage of the debug UART pins, to be able to let the user see
+	 * the output, even if the board file forgets to configure these pins.
+	 */
+	imx_gpio_mode(PWM1_DUART_TX);
+	imx_gpio_mode(PWM0_DUART_RX);
+
+	/* Disable UART */
+	writel(0, dev->map_base + UARTDBGCR);
+
+	/* Mask interrupts */
+	writel(0, dev->map_base + UARTDBGIMSC);
+
+	return 0;
+}
+
+static struct stm_serial_local stm_device = {
+	.cdev = {
+		.f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR,
+		.tstc = stm_serial_tstc,
+		.putc = stm_serial_putc,
+		.getc = stm_serial_getc,
+		.flush = stm_serial_flush,
+		.setbrg = stm_serial_setbaudrate,
+	},
+};
+
+static int stm_serial_probe(struct device_d *dev)
+{
+	stm_device.cdev.dev = dev;
+	dev->type_data = &stm_device.cdev;
+
+	stm_serial_init_port(&stm_device.cdev);
+	stm_serial_setbaudrate(&stm_device.cdev, CONFIG_BAUDRATE);
+
+	/* Enable UART */
+	writel(TXE | RXE | UARTEN, dev->map_base + UARTDBGCR);
+
+	console_register(&stm_device.cdev);
+	stm_device.notify.notifier_call = stm_clocksource_clock_change;
+	clock_register_client(&stm_device.notify);
+
+	return 0;
+}
+
+static void stm_serial_remove(struct device_d *dev)
+{
+	struct console_device *cdev = dev->type_data;
+
+	stm_serial_flush(cdev);
+}
+
+static struct driver_d stm_serial_driver = {
+        .name   = "stm_serial",
+        .probe  = stm_serial_probe,
+	.remove = stm_serial_remove,
+};
+
+static int stm_serial_init(void)
+{
+	register_driver(&stm_serial_driver);
+	return 0;
+}
+
+console_initcall(stm_serial_init);
-- 
1.7.2.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 3/4] Add the i.MX23-EVK platform (WIP)

[Juergen Beisert]

Note: This is work in progress. Use with care.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 Documentation/boards.dox                      |    1 +
 arch/arm/Makefile                             |    2 +
 arch/arm/boards/freescale-mx23-evk/Makefile   |    2 +
 arch/arm/boards/freescale-mx23-evk/config.h   |   16 ++
 arch/arm/boards/freescale-mx23-evk/mx23-evk.c |   96 +++++++++++
 arch/arm/configs/imx23evk_defconfig           |  222 +++++++++++++++++++++++++
 arch/arm/mach-stm/Kconfig                     |    7 +
 7 files changed, 346 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boards/freescale-mx23-evk/Makefile
 create mode 100644 arch/arm/boards/freescale-mx23-evk/config.h
 create mode 100644 arch/arm/boards/freescale-mx23-evk/mx23-evk.c
 create mode 100644 arch/arm/configs/imx23evk_defconfig

diff --git a/Documentation/boards.dox b/Documentation/boards.dox
index 3eb79b2..7b1450e 100644
--- a/Documentation/boards.dox
+++ b/Documentation/boards.dox
@@ -14,6 +14,7 @@ ARM type:
 @li @subpage imx21ads
 @li @subpage imx27ads
 @li @subpage the3stack
+@li @subpage mx23_evk
 @li @subpage scb9328
 @li @subpage netx
 @li @subpage dev_omap_arch
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 77b6cf4..75fa6d3 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -41,6 +41,7 @@ CPPFLAGS += $(CFLAGS_ABI) $(arch-y) $(tune-y)
 machine-$(CONFIG_ARCH_AT91)		:= at91
 machine-$(CONFIG_ARCH_EP93XX)		:= ep93xx
 machine-$(CONFIG_ARCH_IMX)		:= imx
+machine-$(CONFIG_ARCH_STM)		:= stm
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_OMAP)		:= omap
@@ -80,6 +81,7 @@ board-$(CONFIG_MACH_PCM043)			:= pcm043
 board-$(CONFIG_MACH_PM9263)			:= pm9263
 board-$(CONFIG_MACH_SCB9328)			:= scb9328
 board-$(CONFIG_MACH_NESO)			:= guf-neso
+board-$(CONFIG_MACH_MX23EVK)			:= freescale-mx23-evk
 
 machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
 
diff --git a/arch/arm/boards/freescale-mx23-evk/Makefile b/arch/arm/boards/freescale-mx23-evk/Makefile
new file mode 100644
index 0000000..cffb561
--- /dev/null
+++ b/arch/arm/boards/freescale-mx23-evk/Makefile
@@ -0,0 +1,2 @@
+#
+obj-y := mx23-evk.o
diff --git a/arch/arm/boards/freescale-mx23-evk/config.h b/arch/arm/boards/freescale-mx23-evk/config.h
new file mode 100644
index 0000000..4b3da8f
--- /dev/null
+++ b/arch/arm/boards/freescale-mx23-evk/config.h
@@ -0,0 +1,16 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
diff --git a/arch/arm/boards/freescale-mx23-evk/mx23-evk.c b/arch/arm/boards/freescale-mx23-evk/mx23-evk.c
new file mode 100644
index 0000000..1ce72be
--- /dev/null
+++ b/arch/arm/boards/freescale-mx23-evk/mx23-evk.c
@@ -0,0 +1,96 @@
+/*
+ * (C) Copyright 2010 Juergen Beisert - Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <init.h>
+#include <gpio.h>
+#include <environment.h>
+#include <asm/armlinux.h>
+#include <generated/mach-types.h>
+#include <mach/imx-regs.h>
+
+static struct memory_platform_data ram_pdata = {
+	.name = "ram0",
+	.flags = DEVFS_RDWR,
+};
+
+static struct device_d sdram_dev = {
+	.name     = "mem",
+	.map_base = IMX_MEMORY_BASE,
+	.size     = 32 * 1024 * 1024,
+	.platform_data = &ram_pdata,
+};
+
+static int mx23_evk_devices_init(void)
+{
+	register_device(&sdram_dev);
+
+	armlinux_add_dram(&sdram_dev);
+	armlinux_set_bootparams((void*)(sdram_dev.map_base + 0x100));
+	armlinux_set_architecture(MACH_TYPE_MX23EVK);
+
+	return 0;
+}
+
+device_initcall(mx23_evk_devices_init);
+
+static struct device_d mx23_evk_serial_device = {
+	.name     = "stm_serial",
+	.map_base = IMX_DBGUART_BASE,
+	.size     = 8192,
+};
+
+static int mx23_evk_console_init(void)
+{
+	return register_device(&mx23_evk_serial_device);
+}
+
+console_initcall(mx23_evk_console_init);
+
+/** @page mx23_evk Freescale's i.MX23 evaluation kit
+
+This CPU card is based on an i.MX23 CPU. The card is shipped with:
+
+- 32 MiB synchronous dynamic RAM (mobile DDR type)
+- ENC28j60 based network (over SPI)
+
+Memory layout when @b barebox is running:
+
+- 0x40000000 start of SDRAM
+- 0x40000100 start of kernel's boot parameters
+  - below malloc area: stack area
+  - below barebox: malloc area
+- 0x41000000 start of @b barebox
+
+@section get_imx23evk_binary How to get the bootloader binary image:
+
+Using the default configuration:
+
+@verbatim
+make ARCH=arm imx23evk_defconfig
+@endverbatim
+
+Build the bootloader binary image:
+
+@verbatim
+make ARCH=arm CROSS_COMPILE=armv5compiler
+@endverbatim
+
+@note replace the armv5compiler with your ARM v5 cross compiler.
+*/
diff --git a/arch/arm/configs/imx23evk_defconfig b/arch/arm/configs/imx23evk_defconfig
new file mode 100644
index 0000000..52eae05
--- /dev/null
+++ b/arch/arm/configs/imx23evk_defconfig
@@ -0,0 +1,222 @@
+#
+# Automatically generated make config: don't edit
+# Linux barebox version: 2010.09.0
+# Mon Oct 11 10:25:16 2010
+#
+# CONFIG_BOARD_LINKER_SCRIPT is not set
+CONFIG_GENERIC_LINKER_SCRIPT=y
+CONFIG_ARM=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_IMX is not set
+CONFIG_ARCH_STM=y
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_S3C24xx is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+
+#
+# processor features
+#
+CONFIG_ARCH_TEXT_BASE=0x41000000
+CONFIG_BOARDINFO="Freescale i.MX23-EVK"
+
+#
+# SigmaTel/Freescale i.MX System-on-Chip
+#
+CONFIG_ARCH_IMX23=y
+CONFIG_MACH_MX23EVK=y
+# CONFIG_MACH_CHUMBY is not set
+
+#
+# Board specific settings       
+#
+CONFIG_AEABI=y
+
+#
+# Arm specific settings         
+#
+CONFIG_CMD_ARM_CPUINFO=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
+CONFIG_GREGORIAN_CALENDER=y
+CONFIG_HAS_KALLSYMS=y
+CONFIG_HAS_MODULES=y
+CONFIG_CMD_MEMORY=y
+CONFIG_ENV_HANDLING=y
+CONFIG_GENERIC_GPIO=y
+
+#
+# General Settings              
+#
+CONFIG_LOCALVERSION_AUTO=y
+
+#
+# memory layout                 
+#
+CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y
+CONFIG_TEXT_BASE=0x41000000
+CONFIG_HAVE_CONFIGURABLE_MEMORY_LAYOUT=y
+CONFIG_MEMORY_LAYOUT_DEFAULT=y
+# CONFIG_MEMORY_LAYOUT_FIXED is not set
+CONFIG_STACK_SIZE=0x8000
+CONFIG_MALLOC_SIZE=0x400000
+CONFIG_BROKEN=y
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_PROMPT="barebox:"
+CONFIG_BAUDRATE=115200
+CONFIG_LONGHELP=y
+CONFIG_CBSIZE=1024
+CONFIG_MAXARGS=16
+CONFIG_SHELL_HUSH=y
+# CONFIG_SHELL_SIMPLE is not set
+# CONFIG_GLOB is not set
+CONFIG_PROMPT_HUSH_PS2="> "
+# CONFIG_HUSH_FANCY_PROMPT is not set
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+# CONFIG_MENU is not set
+# CONFIG_PASSWORD is not set
+CONFIG_DYNAMIC_CRC_TABLE=y
+CONFIG_ERRNO_MESSAGES=y
+CONFIG_TIMESTAMP=y
+CONFIG_CONSOLE_FULL=y
+CONFIG_CONSOLE_ACTIVATE_FIRST=y
+# CONFIG_OF_FLAT_TREE is not set
+CONFIG_PARTITION=y
+# CONFIG_DEFAULT_ENVIRONMENT is not set
+
+#
+# Debugging                     
+#
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_FLASH_NOISE is not set
+# CONFIG_ENABLE_PARTITION_NOISE is not set
+# CONFIG_ENABLE_DEVICE_NOISE is not set
+
+#
+# Commands                      
+#
+
+#
+# scripting                     
+#
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TRUE=y
+CONFIG_CMD_FALSE=y
+# CONFIG_CMD_LOGIN is not set
+# CONFIG_CMD_PASSWD is not set
+
+#
+# file commands                 
+#
+CONFIG_CMD_LS=y
+CONFIG_CMD_RM=y
+CONFIG_CMD_CAT=y
+CONFIG_CMD_MKDIR=y
+CONFIG_CMD_RMDIR=y
+CONFIG_CMD_CP=y
+CONFIG_CMD_PWD=y
+CONFIG_CMD_CD=y
+CONFIG_CMD_MOUNT=y
+CONFIG_CMD_UMOUNT=y
+
+#
+# console                       
+#
+CONFIG_CMD_CLEAR=y
+CONFIG_CMD_ECHO=y
+CONFIG_CMD_ECHO_E=y
+
+#
+# memory                        
+#
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_MEMINFO is not set
+# CONFIG_CMD_CRC is not set
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_MTEST_ALTERNATIVE=y
+
+#
+# flash                         
+#
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_UBI is not set
+
+#
+# booting                       
+#
+CONFIG_CMD_BOOTM=y
+# CONFIG_CMD_BOOTM_ZLIB is not set
+# CONFIG_CMD_BOOTM_BZLIB is not set
+# CONFIG_CMD_BOOTM_SHOW_TYPE is not set
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_BOOTU=y
+CONFIG_CMD_RESET=y
+# CONFIG_CMD_GO is not set
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_TEST=y
+CONFIG_CMD_VERSION=y
+CONFIG_CMD_HELP=y
+CONFIG_CMD_DEVINFO=y
+# CONFIG_CMD_GPIO is not set
+# CONFIG_CMD_UNLZO is not set
+# CONFIG_NET is not set
+
+#
+# Drivers                       
+#
+
+#
+# serial drivers                
+#
+# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
+CONFIG_DRIVER_SERIAL_STM378X=y
+# CONFIG_DRIVER_SERIAL_NS16550 is not set
+
+#
+# SPI drivers                   
+#
+# CONFIG_SPI is not set
+# CONFIG_I2C is not set
+
+#
+# flash drivers                 
+#
+# CONFIG_DRIVER_CFI is not set
+# CONFIG_MTD is not set
+# CONFIG_ATA is not set
+# CONFIG_USB is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_VIDEO is not set
+
+#
+# Filesystem support            
+#
+# CONFIG_FS_CRAMFS is not set
+CONFIG_FS_RAMFS=y
+CONFIG_FS_DEVFS=y
+CONFIG_CRC32=y
+# CONFIG_DIGEST is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_PROCESS_ESCAPE_SEQUENCE=y
diff --git a/arch/arm/mach-stm/Kconfig b/arch/arm/mach-stm/Kconfig
index 9858d3a..bbdea51 100644
--- a/arch/arm/mach-stm/Kconfig
+++ b/arch/arm/mach-stm/Kconfig
@@ -2,8 +2,10 @@ if ARCH_STM
 
 config ARCH_TEXT_BASE
 	hex
+	default 0x41000000 if MACH_MX23EVK
 
 config BOARDINFO
+	default "Freescale i.MX23-EVK" if MACH_MX23EVK
 
 comment "SigmaTel/Freescale i.MX System-on-Chip"
 
@@ -21,6 +23,11 @@ if ARCH_IMX23
 choice
 	prompt "i.MX23 Board Type"
 
+config MACH_MX23EVK
+	bool "mx23-evk"
+	help
+	  Say Y here if you are using the Freescale i.MX23-EVK board
+
 endchoice
 
 endif
-- 
1.7.2.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 3/4] Add the i.MX23-EVK platform (WIP)

[Juergen Beisert]

Me wrote:
> Note: This is work in progress. Use with care.
>
> Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
> ---
>  Documentation/boards.dox                      |    1 +
>  arch/arm/Makefile                             |    2 +
>  arch/arm/boards/freescale-mx23-evk/Makefile   |    2 +
>  arch/arm/boards/freescale-mx23-evk/config.h   |   16 ++
>  arch/arm/boards/freescale-mx23-evk/mx23-evk.c |   96 +++++++++++
>  arch/arm/configs/imx23evk_defconfig           |  222
> +++++++++++++++++++++++++ arch/arm/mach-stm/Kconfig                     |  
>  7 +
>  7 files changed, 346 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/boards/freescale-mx23-evk/Makefile
>  create mode 100644 arch/arm/boards/freescale-mx23-evk/config.h
>  create mode 100644 arch/arm/boards/freescale-mx23-evk/mx23-evk.c
>  create mode 100644 arch/arm/configs/imx23evk_defconfig
>
> [...]
>
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 77b6cf4..75fa6d3 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -41,6 +41,7 @@ CPPFLAGS += $(CFLAGS_ABI) $(arch-y) $(tune-y)
>  machine-$(CONFIG_ARCH_AT91)		:= at91
>  machine-$(CONFIG_ARCH_EP93XX)		:= ep93xx
>  machine-$(CONFIG_ARCH_IMX)		:= imx
> +machine-$(CONFIG_ARCH_STM)		:= stm
   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Ups, this should be part of the first architecture patch, not this platform 
patch. Resent the whole series?

> [...]

jbe

-- 
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | Phone: +49-8766-939 228     |
Vertretung Sued/Muenchen, Germany             | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686              | http://www.pengutronix.de/  |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 4/4] Add the i.MX23 based Chumby platform (WIP)

[Juergen Beisert]

The so called "chumby one" aka falconwing is an i.MX23 based platform.

Note: This is work in progress. Use with care.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 Documentation/boards.dox                       |    1 +
 arch/arm/Makefile                              |    1 +
 arch/arm/boards/chumby_falconwing/Makefile     |    1 +
 arch/arm/boards/chumby_falconwing/config.h     |   21 ++
 arch/arm/boards/chumby_falconwing/falconwing.c |  271 ++++++++++++++++++++++++
 arch/arm/configs/chumbyone_defconfig           |  224 +++++++++++++++++++
 arch/arm/mach-stm/Kconfig                      |    9 +
 7 files changed, 528 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boards/chumby_falconwing/Makefile
 create mode 100644 arch/arm/boards/chumby_falconwing/config.h
 create mode 100644 arch/arm/boards/chumby_falconwing/falconwing.c
 create mode 100644 arch/arm/configs/chumbyone_defconfig

diff --git a/Documentation/boards.dox b/Documentation/boards.dox
index 7b1450e..0b7a198 100644
--- a/Documentation/boards.dox
+++ b/Documentation/boards.dox
@@ -15,6 +15,7 @@ ARM type:
 @li @subpage imx27ads
 @li @subpage the3stack
 @li @subpage mx23_evk
+@li @subpage chumbyone
 @li @subpage scb9328
 @li @subpage netx
 @li @subpage dev_omap_arch
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 75fa6d3..b25f366 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -82,6 +82,7 @@ board-$(CONFIG_MACH_PM9263)			:= pm9263
 board-$(CONFIG_MACH_SCB9328)			:= scb9328
 board-$(CONFIG_MACH_NESO)			:= guf-neso
 board-$(CONFIG_MACH_MX23EVK)			:= freescale-mx23-evk
+board-$(CONFIG_MACH_CHUMBY)			:= chumby_falconwing
 
 machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
 
diff --git a/arch/arm/boards/chumby_falconwing/Makefile b/arch/arm/boards/chumby_falconwing/Makefile
new file mode 100644
index 0000000..0bc79d9
--- /dev/null
+++ b/arch/arm/boards/chumby_falconwing/Makefile
@@ -0,0 +1 @@
+obj-y = falconwing.o
diff --git a/arch/arm/boards/chumby_falconwing/config.h b/arch/arm/boards/chumby_falconwing/config.h
new file mode 100644
index 0000000..87d9e2f
--- /dev/null
+++ b/arch/arm/boards/chumby_falconwing/config.h
@@ -0,0 +1,21 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _CONFIG_H_
+# define _CONFIG_H_
+
+#endif /* _CONFIG_H_ */
diff --git a/arch/arm/boards/chumby_falconwing/falconwing.c b/arch/arm/boards/chumby_falconwing/falconwing.c
new file mode 100644
index 0000000..d209dd5
--- /dev/null
+++ b/arch/arm/boards/chumby_falconwing/falconwing.c
@@ -0,0 +1,271 @@
+/*
+ * (C) Copyright 2010 Juergen Beisert - Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <init.h>
+#include <gpio.h>
+#include <environment.h>
+#include <asm/armlinux.h>
+#include <asm/io.h>
+#include <generated/mach-types.h>
+#include <mach/imx-regs.h>
+
+static struct memory_platform_data ram_pdata = {
+	.name = "ram0",
+	.flags = DEVFS_RDWR,
+};
+
+static struct device_d sdram_dev = {
+	.name     = "mem",
+	.map_base = IMX_MEMORY_BASE,
+	.size     = 64 * 1024 * 1024,
+	.platform_data = &ram_pdata,
+};
+
+static const uint32_t pad_setup[] = {
+	/* may be not required as already done by the bootlet code */
+#if 0
+	/* SDRAM data signals */
+	EMI_D15 | STRENGTH(0) | VE_2_5V,
+	EMI_D14 | STRENGTH(0) | VE_2_5V,
+	EMI_D13 | STRENGTH(0) | VE_2_5V,
+	EMI_D12 | STRENGTH(0) | VE_2_5V,
+	EMI_D11 | STRENGTH(0) | VE_2_5V,
+	EMI_D10 | STRENGTH(0) | VE_2_5V,
+	EMI_D9 | STRENGTH(0) | VE_2_5V,
+	EMI_D8 | STRENGTH(0) | VE_2_5V,
+	EMI_D7 | STRENGTH(0) | VE_2_5V,
+	EMI_D6 | STRENGTH(0) | VE_2_5V,
+	EMI_D5 | STRENGTH(0) | VE_2_5V,
+	EMI_D4 | STRENGTH(0) | VE_2_5V,
+	EMI_D3 | STRENGTH(0) | VE_2_5V,
+	EMI_D2 | STRENGTH(0) | VE_2_5V,
+	EMI_D1 | STRENGTH(0) | VE_2_5V,
+	EMI_D0 | STRENGTH(0) | VE_2_5V,
+
+	/* SDRAM data control signals */
+	EMI_DQM0 | STRENGTH(0) | VE_2_5V,	/* LDM */
+	EMI_DQM1 | STRENGTH(0) | VE_2_5V,	/* UDM */
+
+	/* SDRAM address signals */
+	EMI_A0 | STRENGTH(0) | VE_2_5V,
+	EMI_A1 | STRENGTH(0) | VE_2_5V,
+	EMI_A2 | STRENGTH(0) | VE_2_5V,
+	EMI_A3 | STRENGTH(0) | VE_2_5V,
+	EMI_A4 | STRENGTH(0) | VE_2_5V,
+	EMI_A5 | STRENGTH(0) | VE_2_5V,
+	EMI_A6 | STRENGTH(0) | VE_2_5V,
+	EMI_A7 | STRENGTH(0) | VE_2_5V,
+	EMI_A8 | STRENGTH(0) | VE_2_5V,
+	EMI_A9 | STRENGTH(0) | VE_2_5V,
+	EMI_A10 | STRENGTH(0) | VE_2_5V,
+	EMI_A11 | STRENGTH(0) | VE_2_5V,
+	EMI_A12 | STRENGTH(0) | VE_2_5V,
+
+	/* SDRAM address control signals */
+	EMI_RASN | STRENGTH(0) | VE_2_5V,
+	EMI_CASN | STRENGTH(0) | VE_2_5V,
+
+	/* SDRAM control signals */
+	EMI_CE0N | STRENGTH(0) | VE_2_5V,
+	EMI_CLK | STRENGTH(0) | VE_2_5V,
+	EMI_CLKN | STRENGTH(0) | VE_2_5V,
+	EMI_CKE | STRENGTH(0) | VE_2_5V,
+	EMI_WEN | STRENGTH(0) | VE_2_5V,
+	EMI_BA0 | STRENGTH(0) | VE_2_5V,
+	EMI_BA1 | STRENGTH(0) | VE_2_5V,
+	EMI_DQS0 | STRENGTH(0) | VE_2_5V,
+	EMI_DQS1 | STRENGTH(0) | VE_2_5V,
+#endif
+	/* debug port */
+	PWM1_DUART_TX | STRENGTH(S4MA),	/*  strength is TBD */
+	PWM0_DUART_RX | STRENGTH(S4MA),	/*  strength is TBD */
+
+	/* lcd */
+	LCD_VSYNC,	/* kernel tries with 12 mA for all LCD related pins */
+	LCD_HSYNC,
+	LCD_ENABE,
+	LCD_DOTCLOCK,
+	LCD_D17,
+	LCD_D16,
+	LCD_D15,
+	LCD_D14,
+	LCD_D13,
+	LCD_D12,
+	LCD_D11,
+	LCD_D10,
+	LCD_D9,
+	LCD_D8,
+	LCD_D7,
+	LCD_D6,
+	LCD_D5,
+	LCD_D4,
+	LCD_D3,
+	LCD_D2,
+	LCD_D1,
+	LCD_D0,
+
+	/* LCD usage currently unknown */
+	LCD_CS,	/* used as SPI SS */
+	LCD_RS,	/* used as SPI CLK */
+	LCD_RESET,
+	LCD_WR,	/* used as SPI MOSI */
+
+	/* I2C to the MMA7455L, KXTE9, AT24C08 (DCID), AT24C128B (ID EEPROM) and QN8005B */
+	I2C_SDA,
+	I2C_CLK,
+
+	/* Rotary decoder (external pull ups) */
+	ROTARYA,
+	ROTARYB,
+
+	/* the chumby bend (external pull up) */
+	PWM4_GPIO | GPIO_IN,
+
+	/* backlight control, to be controled by PWM, here we only want to disable it */
+	PWM2_GPIO | GPIO_OUT | GPIO_VALUE(0),	/* 1 enables, 0 disables the backlight */
+
+	/* send a reset signal to the USB hub */
+	AUART1_TX_GPIO | GPIO_OUT | GPIO_VALUE(0),
+
+	/* USB power disable (FIXME what level to be switched off) */
+	AUART1_CTS_GPIO | GPIO_OUT | GPIO_VALUE(0),
+
+	/* Detecting if a display is connected (0 = display attached) (external pull up) */
+	AUART1_RTS_GPIO | GPIO_IN,
+
+	/* disable the audio amplifier */
+	GPMI_D08_GPIO | GPIO_OUT | GPIO_VALUE(0),
+
+	/* Head Phone detection (FIXME what level when plugged in) (external pull up) */
+	GPMI_D11_GPIO | GPIO_IN,
+
+#if 0
+	/* Enable the local 5V (FIXME what to do when the bootloader runs) */
+	GPMI_D12_GPIO | GPIO_OUT | GPIO_VALUE(1),
+#endif
+
+	/* not used pins */
+	GPMI_D09_GPIO | GPIO_IN | PULLUP(1),
+	GPMI_D10_GPIO | GPIO_IN | PULLUP(1),
+	GPMI_D13_GPIO | GPIO_IN | PULLUP(1),
+
+	/* unknown. Not connected to anything than test pin J113 */
+	GPMI_D14_GPIO | GPIO_IN | PULLUP(1),
+
+	/* unknown. Not connected to anything than test pin J114 */
+	GPMI_D15_GPIO | GPIO_IN | PULLUP(1),
+
+	/* NAND controller (Note: There is no NAND device on the board) */
+	GPMI_D00 | PULLUP(1),
+	GPMI_D01 | PULLUP(1),
+	GPMI_D02 | PULLUP(1),
+	GPMI_D03 | PULLUP(1),
+	GPMI_D04 | PULLUP(1),
+	GPMI_D05 | PULLUP(1),
+	GPMI_D06 | PULLUP(1),
+	GPMI_D07 | PULLUP(1),
+	GPMI_CE0N,
+	GPMI_RDY0 | PULLUP(1),
+	GPMI_WRN,	/* kernel tries here with 12 mA */
+	GPMI_RDN,	/* kernel tries here with 12 mA */
+	GPMI_WPM,	/* kernel tries here with 12 mA */
+	GPMI_CLE,
+	GPMI_ALE,
+
+	/* SD card interface */
+	SSP1_DATA0 | PULLUP(1),	/* available at J201 */
+	SSP1_DATA1 | PULLUP(1),	/* available at J200 */
+	SSP1_DATA2 | PULLUP(1),	/* available at J205 */
+	SSP1_DATA3 | PULLUP(1),	/* available at J204 */
+	SSP1_SCK,		/* available at J202 */
+	SSP1_CMD | PULLUP(1),	/* available at J203 */
+	SSP1_DETECT | PULLUP(1),	/* only connected to test pin J115 */
+
+	/* other not used pins */
+	GPMI_CE1N_GPIO | GPIO_IN | PULLUP(1),
+	GPMI_CE2N_GPIO | GPIO_IN | PULLUP(1),
+	GPMI_RDY1_GPIO | GPIO_IN | PULLUP(1),
+	GPMI_RDY2_GPIO | GPIO_IN | PULLUP(1),
+	GPMI_RDY3_GPIO | GPIO_IN | PULLUP(1),
+};
+
+static int falconwing_devices_init(void)
+{
+	int i;
+
+	/* initizalize gpios */
+	for (i = 0; i < ARRAY_SIZE(pad_setup); i++)
+		imx_gpio_mode(pad_setup[i]);
+
+	register_device(&sdram_dev);
+
+	armlinux_add_dram(&sdram_dev);
+	armlinux_set_bootparams((void*)(sdram_dev.map_base + 0x100));
+	armlinux_set_architecture(MACH_TYPE_CHUMBY);
+
+	return 0;
+}
+
+device_initcall(falconwing_devices_init);
+
+static struct device_d falconwing_serial_device = {
+	.name     = "stm_serial",
+	.map_base = IMX_DBGUART_BASE,
+	.size     = 8192,
+};
+
+static int falconwing_console_init(void)
+{
+	return register_device(&falconwing_serial_device);
+}
+
+console_initcall(falconwing_console_init);
+
+/** @page chumbyone Chumby Industrie's Falconwing
+
+This device is also known as "chumby one" (http://www.chumby.com/)
+
+This CPU card is based on a Freescale i.MX23 CPU. The card is shipped with:
+
+- 64 MiB synchronous dynamic RAM (DDR type)
+
+Memory layout when @b barebox is running:
+
+- 0x40000000 start of SDRAM
+- 0x40000100 start of kernel's boot parameters
+  - below malloc area: stack area
+  - below barebox: malloc area
+- 0x42000000 start of @b barebox
+
+@section get_falconwing_binary How to get the bootloader binary image:
+
+Using the default configuration:
+
+@verbatim
+make ARCH=arm chumbyone_defconfig
+@endverbatim
+
+Build the bootloader binary image:
+
+@verbatim
+make ARCH=arm CROSS_COMPILE=armv5compiler
+@endverbatim
+
+@note replace the armv5compiler with your ARM v5 cross compiler.
+*/
diff --git a/arch/arm/configs/chumbyone_defconfig b/arch/arm/configs/chumbyone_defconfig
new file mode 100644
index 0000000..1e158dc
--- /dev/null
+++ b/arch/arm/configs/chumbyone_defconfig
@@ -0,0 +1,224 @@
+#
+# Automatically generated make config: don't edit
+# Linux barebox version: 2010.09.0
+# Mon Oct 11 10:23:23 2010
+#
+# CONFIG_BOARD_LINKER_SCRIPT is not set
+CONFIG_GENERIC_LINKER_SCRIPT=y
+CONFIG_ARM=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_IMX is not set
+CONFIG_ARCH_STM=y
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_S3C24xx is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+
+#
+# processor features
+#
+CONFIG_ARCH_TEXT_BASE=0x42000000
+CONFIG_BOARDINFO="Chumby Falconwing"
+
+#
+# SigmaTel/Freescale i.MX System-on-Chip
+#
+CONFIG_ARCH_IMX23=y
+# CONFIG_MACH_MX23EVK is not set
+CONFIG_MACH_CHUMBY=y
+
+#
+# Board specific settings       
+#
+CONFIG_AEABI=y
+
+#
+# Arm specific settings         
+#
+CONFIG_CMD_ARM_CPUINFO=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
+CONFIG_GREGORIAN_CALENDER=y
+CONFIG_HAS_KALLSYMS=y
+CONFIG_HAS_MODULES=y
+CONFIG_CMD_MEMORY=y
+CONFIG_ENV_HANDLING=y
+CONFIG_GENERIC_GPIO=y
+
+#
+# General Settings              
+#
+CONFIG_LOCALVERSION_AUTO=y
+
+#
+# memory layout                 
+#
+CONFIG_HAVE_MMU=y
+# CONFIG_MMU is not set
+CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y
+CONFIG_TEXT_BASE=0x42000000
+CONFIG_HAVE_CONFIGURABLE_MEMORY_LAYOUT=y
+CONFIG_MEMORY_LAYOUT_DEFAULT=y
+# CONFIG_MEMORY_LAYOUT_FIXED is not set
+CONFIG_STACK_SIZE=0x8000
+CONFIG_MALLOC_SIZE=0x400000
+CONFIG_BROKEN=y
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_PROMPT="barebox:"
+CONFIG_BAUDRATE=115200
+CONFIG_LONGHELP=y
+CONFIG_CBSIZE=1024
+CONFIG_MAXARGS=16
+CONFIG_SHELL_HUSH=y
+# CONFIG_SHELL_SIMPLE is not set
+# CONFIG_GLOB is not set
+CONFIG_PROMPT_HUSH_PS2="> "
+# CONFIG_HUSH_FANCY_PROMPT is not set
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+# CONFIG_MENU is not set
+# CONFIG_PASSWORD is not set
+CONFIG_DYNAMIC_CRC_TABLE=y
+CONFIG_ERRNO_MESSAGES=y
+CONFIG_TIMESTAMP=y
+CONFIG_CONSOLE_FULL=y
+CONFIG_CONSOLE_ACTIVATE_FIRST=y
+# CONFIG_OF_FLAT_TREE is not set
+CONFIG_PARTITION=y
+# CONFIG_DEFAULT_ENVIRONMENT is not set
+
+#
+# Debugging                     
+#
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_FLASH_NOISE is not set
+# CONFIG_ENABLE_PARTITION_NOISE is not set
+# CONFIG_ENABLE_DEVICE_NOISE is not set
+
+#
+# Commands                      
+#
+
+#
+# scripting                     
+#
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TRUE=y
+CONFIG_CMD_FALSE=y
+# CONFIG_CMD_LOGIN is not set
+# CONFIG_CMD_PASSWD is not set
+
+#
+# file commands                 
+#
+CONFIG_CMD_LS=y
+CONFIG_CMD_RM=y
+CONFIG_CMD_CAT=y
+CONFIG_CMD_MKDIR=y
+CONFIG_CMD_RMDIR=y
+CONFIG_CMD_CP=y
+CONFIG_CMD_PWD=y
+CONFIG_CMD_CD=y
+CONFIG_CMD_MOUNT=y
+CONFIG_CMD_UMOUNT=y
+
+#
+# console                       
+#
+CONFIG_CMD_CLEAR=y
+CONFIG_CMD_ECHO=y
+CONFIG_CMD_ECHO_E=y
+
+#
+# memory                        
+#
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_MEMINFO is not set
+# CONFIG_CMD_CRC is not set
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_MTEST_ALTERNATIVE=y
+
+#
+# flash                         
+#
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_UBI is not set
+
+#
+# booting                       
+#
+CONFIG_CMD_BOOTM=y
+# CONFIG_CMD_BOOTM_ZLIB is not set
+# CONFIG_CMD_BOOTM_BZLIB is not set
+# CONFIG_CMD_BOOTM_SHOW_TYPE is not set
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_BOOTU=y
+CONFIG_CMD_RESET=y
+# CONFIG_CMD_GO is not set
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_TEST=y
+CONFIG_CMD_VERSION=y
+CONFIG_CMD_HELP=y
+CONFIG_CMD_DEVINFO=y
+# CONFIG_CMD_GPIO is not set
+# CONFIG_CMD_UNLZO is not set
+# CONFIG_NET is not set
+
+#
+# Drivers                       
+#
+
+#
+# serial drivers                
+#
+# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
+CONFIG_DRIVER_SERIAL_STM378X=y
+# CONFIG_DRIVER_SERIAL_NS16550 is not set
+
+#
+# SPI drivers                   
+#
+# CONFIG_SPI is not set
+# CONFIG_I2C is not set
+
+#
+# flash drivers                 
+#
+# CONFIG_DRIVER_CFI is not set
+# CONFIG_MTD is not set
+# CONFIG_ATA is not set
+# CONFIG_USB is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_VIDEO is not set
+
+#
+# Filesystem support            
+#
+# CONFIG_FS_CRAMFS is not set
+CONFIG_FS_RAMFS=y
+CONFIG_FS_DEVFS=y
+CONFIG_CRC32=y
+# CONFIG_DIGEST is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_PROCESS_ESCAPE_SEQUENCE=y
diff --git a/arch/arm/mach-stm/Kconfig b/arch/arm/mach-stm/Kconfig
index bbdea51..021919a 100644
--- a/arch/arm/mach-stm/Kconfig
+++ b/arch/arm/mach-stm/Kconfig
@@ -3,9 +3,11 @@ if ARCH_STM
 config ARCH_TEXT_BASE
 	hex
 	default 0x41000000 if MACH_MX23EVK
+	default 0x42000000 if MACH_CHUMBY
 
 config BOARDINFO
 	default "Freescale i.MX23-EVK" if MACH_MX23EVK
+	default "Chumby Falconwing" if MACH_CHUMBY
 
 comment "SigmaTel/Freescale i.MX System-on-Chip"
 
@@ -28,6 +30,13 @@ config MACH_MX23EVK
 	help
 	  Say Y here if you are using the Freescale i.MX23-EVK board
 
+config MACH_CHUMBY
+	bool "Chumby Falconwing"
+	select HAVE_MMU
+	help
+	  Say Y here if you are using the "chumby one" aka falconwing from
+	  Chumby Industries
+
 endchoice
 
 endif
-- 
1.7.2.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Add the i.MX23/i.MX28 architecure

[Juergen Beisert]

This patch adds the basic support for the i.MX23/i.MX28 architecture. These
CPUs are branded with i.MX but they are mostly of type STMP378X from SigmaTel.
So, they do not share most of their internal devices with the other i.MX CPUs.
That's why I open a new sub architecture 'mach-stm'.

Comments are welcome.

Regards,
Juergen


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 4/4] Add the i.MX23 based Chumby platform (WIP)

[Juergen Beisert]

The so called "chumby one" aka falconwing is an i.MX23 based platform.

Note: This is work in progress. Use with care.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/Makefile                              |    1 +
 arch/arm/boards/chumby_falconwing/Makefile     |    1 +
 arch/arm/boards/chumby_falconwing/config.h     |   21 ++
 arch/arm/boards/chumby_falconwing/falconwing.c |  271 ++++++++++++++++++++++++
 arch/arm/configs/chumbyone_defconfig           |  224 +++++++++++++++++++
 arch/arm/mach-stm/Kconfig                      |    9 +
 6 files changed, 527 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boards/chumby_falconwing/Makefile
 create mode 100644 arch/arm/boards/chumby_falconwing/config.h
 create mode 100644 arch/arm/boards/chumby_falconwing/falconwing.c
 create mode 100644 arch/arm/configs/chumbyone_defconfig

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 75fa6d3..b25f366 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -82,6 +82,7 @@ board-$(CONFIG_MACH_PM9263)			:= pm9263
 board-$(CONFIG_MACH_SCB9328)			:= scb9328
 board-$(CONFIG_MACH_NESO)			:= guf-neso
 board-$(CONFIG_MACH_MX23EVK)			:= freescale-mx23-evk
+board-$(CONFIG_MACH_CHUMBY)			:= chumby_falconwing
 
 machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
 
diff --git a/arch/arm/boards/chumby_falconwing/Makefile b/arch/arm/boards/chumby_falconwing/Makefile
new file mode 100644
index 0000000..0bc79d9
--- /dev/null
+++ b/arch/arm/boards/chumby_falconwing/Makefile
@@ -0,0 +1 @@
+obj-y = falconwing.o
diff --git a/arch/arm/boards/chumby_falconwing/config.h b/arch/arm/boards/chumby_falconwing/config.h
new file mode 100644
index 0000000..87d9e2f
--- /dev/null
+++ b/arch/arm/boards/chumby_falconwing/config.h
@@ -0,0 +1,21 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _CONFIG_H_
+# define _CONFIG_H_
+
+#endif /* _CONFIG_H_ */
diff --git a/arch/arm/boards/chumby_falconwing/falconwing.c b/arch/arm/boards/chumby_falconwing/falconwing.c
new file mode 100644
index 0000000..b28d0ba
--- /dev/null
+++ b/arch/arm/boards/chumby_falconwing/falconwing.c
@@ -0,0 +1,271 @@
+/*
+ * (C) Copyright 2010 Juergen Beisert - Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <init.h>
+#include <gpio.h>
+#include <environment.h>
+#include <asm/armlinux.h>
+#include <asm/io.h>
+#include <generated/mach-types.h>
+#include <mach/imx-regs.h>
+
+static struct memory_platform_data ram_pdata = {
+	.name = "ram0",
+	.flags = DEVFS_RDWR,
+};
+
+static struct device_d sdram_dev = {
+	.name     = "mem",
+	.map_base = IMX_MEMORY_BASE,
+	.size     = 64 * 1024 * 1024,
+	.platform_data = &ram_pdata,
+};
+
+static void falconwing_mmu_init(void)
+{
+#ifdef CONFIG_MMU
+	mmu_init();
+	arm_create_section(IMX_MEMORY_BASE, IMX_MEMORY_BASE, 64, PMD_SECT_DEF_CACHED);
+	arm_create_section(IMX_MEMORY_BASE + 128 * 1024 * 1024, IMX_MEMORY_BASE, 64, PMD_SECT_DEF_UNCACHED);
+	setup_dma_coherent(0x10000000);
+	arm_create_section(0x0, TEXT_BASE, 1, PMD_SECT_DEF_UNCACHED);
+	mmu_enable();
+#endif
+}
+
+extern void imx_dump_clocks(void);
+
+static const uint32_t pad_setup[] = {
+	/* may be not required as already done by the bootlet code */
+#if 0
+	/* SDRAM data signals */
+	EMI_D15 | STRENGTH(0) | VE_2_5V,
+	EMI_D14 | STRENGTH(0) | VE_2_5V,
+	EMI_D13 | STRENGTH(0) | VE_2_5V,
+	EMI_D12 | STRENGTH(0) | VE_2_5V,
+	EMI_D11 | STRENGTH(0) | VE_2_5V,
+	EMI_D10 | STRENGTH(0) | VE_2_5V,
+	EMI_D9 | STRENGTH(0) | VE_2_5V,
+	EMI_D8 | STRENGTH(0) | VE_2_5V,
+	EMI_D7 | STRENGTH(0) | VE_2_5V,
+	EMI_D6 | STRENGTH(0) | VE_2_5V,
+	EMI_D5 | STRENGTH(0) | VE_2_5V,
+	EMI_D4 | STRENGTH(0) | VE_2_5V,
+	EMI_D3 | STRENGTH(0) | VE_2_5V,
+	EMI_D2 | STRENGTH(0) | VE_2_5V,
+	EMI_D1 | STRENGTH(0) | VE_2_5V,
+	EMI_D0 | STRENGTH(0) | VE_2_5V,
+
+	/* SDRAM data control signals */
+	EMI_DQM0 | STRENGTH(0) | VE_2_5V,	/* LDM */
+	EMI_DQM1 | STRENGTH(0) | VE_2_5V,	/* UDM */
+
+	/* SDRAM address signals */
+	EMI_A0 | STRENGTH(0) | VE_2_5V,
+	EMI_A1 | STRENGTH(0) | VE_2_5V,
+	EMI_A2 | STRENGTH(0) | VE_2_5V,
+	EMI_A3 | STRENGTH(0) | VE_2_5V,
+	EMI_A4 | STRENGTH(0) | VE_2_5V,
+	EMI_A5 | STRENGTH(0) | VE_2_5V,
+	EMI_A6 | STRENGTH(0) | VE_2_5V,
+	EMI_A7 | STRENGTH(0) | VE_2_5V,
+	EMI_A8 | STRENGTH(0) | VE_2_5V,
+	EMI_A9 | STRENGTH(0) | VE_2_5V,
+	EMI_A10 | STRENGTH(0) | VE_2_5V,
+	EMI_A11 | STRENGTH(0) | VE_2_5V,
+	EMI_A12 | STRENGTH(0) | VE_2_5V,
+
+	/* SDRAM address control signals */
+	EMI_RASN | STRENGTH(0) | VE_2_5V,
+	EMI_CASN | STRENGTH(0) | VE_2_5V,
+
+	/* SDRAM control signals */
+	EMI_CE0N | STRENGTH(0) | VE_2_5V,
+	EMI_CLK | STRENGTH(0) | VE_2_5V,
+	EMI_CLKN | STRENGTH(0) | VE_2_5V,
+	EMI_CKE | STRENGTH(0) | VE_2_5V,
+	EMI_WEN | STRENGTH(0) | VE_2_5V,
+	EMI_BA0 | STRENGTH(0) | VE_2_5V,
+	EMI_BA1 | STRENGTH(0) | VE_2_5V,
+	EMI_DQS0 | STRENGTH(0) | VE_2_5V,
+	EMI_DQS1 | STRENGTH(0) | VE_2_5V,
+#endif
+	/* debug port */
+	PWM1_DUART_TX | STRENGTH(S4MA),	/*  strength is TBD */
+	PWM0_DUART_RX | STRENGTH(S4MA),	/*  strength is TBD */
+
+	/* lcd */
+	LCD_VSYNC,	/* kernel tries with 12 mA for all LCD related pins */
+	LCD_HSYNC,
+	LCD_ENABE,
+	LCD_DOTCLOCK,
+	LCD_D17,
+	LCD_D16,
+	LCD_D15,
+	LCD_D14,
+	LCD_D13,
+	LCD_D12,
+	LCD_D11,
+	LCD_D10,
+	LCD_D9,
+	LCD_D8,
+	LCD_D7,
+	LCD_D6,
+	LCD_D5,
+	LCD_D4,
+	LCD_D3,
+	LCD_D2,
+	LCD_D1,
+	LCD_D0,
+
+	/* LCD usage currently unknown */
+	LCD_CS,	/* used as SPI SS */
+	LCD_RS,	/* used as SPI CLK */
+	LCD_RESET,
+	LCD_WR,	/* used as SPI MOSI */
+
+	/* I2C to the MMA7455L, KXTE9, AT24C08 (DCID), AT24C128B (ID EEPROM) and QN8005B */
+	I2C_SDA,
+	I2C_CLK,
+
+	/* Rotary decoder (external pull ups) */
+	ROTARYA,
+	ROTARYB,
+
+	/* the chumby bend (external pull up) */
+	PWM4_GPIO | GPIO_IN,
+
+	/* backlight control, to be controled by PWM, here we only want to disable it */
+	PWM2_GPIO | GPIO_OUT | GPIO_VALUE(0),	/* 1 enables, 0 disables the backlight */
+
+	/* send a reset signal to the USB hub */
+	AUART1_TX_GPIO | GPIO_OUT | GPIO_VALUE(0),
+
+	/* USB power disable (FIXME what level to be switched off) */
+	AUART1_CTS_GPIO | GPIO_OUT | GPIO_VALUE(0),
+
+	/* Detecting if a display is connected (0 = display attached) (external pull up) */
+	AUART1_RTS_GPIO | GPIO_IN,
+
+	/* disable the audio amplifier */
+	GPMI_D08_GPIO | GPIO_OUT | GPIO_VALUE(0),
+
+	/* Head Phone detection (FIXME what level when plugged in) (external pull up) */
+	GPMI_D11_GPIO | GPIO_IN,
+
+#if 0
+	/* Enable the local 5V (FIXME what to do when the bootloader runs) */
+	GPMI_D12_GPIO | GPIO_OUT | GPIO_VALUE(1),
+#endif
+
+	/* not used pins */
+	GPMI_D09_GPIO | GPIO_IN | PULLUP(1),
+	GPMI_D10_GPIO | GPIO_IN | PULLUP(1),
+	GPMI_D13_GPIO | GPIO_IN | PULLUP(1),
+
+	/* unknown. Not connected to anything than test pin J113 */
+	GPMI_D14_GPIO | GPIO_IN | PULLUP(1),
+
+	/* unknown. Not connected to anything than test pin J114 */
+	GPMI_D15_GPIO | GPIO_IN | PULLUP(1),
+
+	/* NAND controller (Note: There is no NAND device on the board) */
+	GPMI_D00 | PULLUP(1),
+	GPMI_D01 | PULLUP(1),
+	GPMI_D02 | PULLUP(1),
+	GPMI_D03 | PULLUP(1),
+	GPMI_D04 | PULLUP(1),
+	GPMI_D05 | PULLUP(1),
+	GPMI_D06 | PULLUP(1),
+	GPMI_D07 | PULLUP(1),
+	GPMI_CE0N,
+	GPMI_RDY0 | PULLUP(1),
+	GPMI_WRN,	/* kernel tries here with 12 mA */
+	GPMI_RDN,	/* kernel tries here with 12 mA */
+	GPMI_WPM,	/* kernel tries here with 12 mA */
+	GPMI_CLE,
+	GPMI_ALE,
+
+	/* SD card interface */
+	SSP1_DATA0 | PULLUP(1),	/* available at J201 */
+	SSP1_DATA1 | PULLUP(1),	/* available at J200 */
+	SSP1_DATA2 | PULLUP(1),	/* available at J205 */
+	SSP1_DATA3 | PULLUP(1),	/* available at J204 */
+	SSP1_SCK,		/* available at J202 */
+	SSP1_CMD | PULLUP(1),	/* available at J203 */
+	SSP1_DETECT | PULLUP(1),	/* only connected to test pin J115 */
+
+	/* other not used pins */
+	GPMI_CE1N_GPIO | GPIO_IN | PULLUP(1),
+	GPMI_CE2N_GPIO | GPIO_IN | PULLUP(1),
+	GPMI_RDY1_GPIO | GPIO_IN | PULLUP(1),
+	GPMI_RDY2_GPIO | GPIO_IN | PULLUP(1),
+	GPMI_RDY3_GPIO | GPIO_IN | PULLUP(1),
+};
+
+static int falconwing_devices_init(void)
+{
+	int i;
+
+	falconwing_mmu_init();
+
+	/* initizalize gpios */
+	for (i = 0; i < ARRAY_SIZE(pad_setup); i++)
+		imx_gpio_mode(pad_setup[i]);
+
+	register_device(&sdram_dev);
+
+	armlinux_add_dram(&sdram_dev);
+	armlinux_set_bootparams((void*)(sdram_dev.map_base + 0x100));
+	armlinux_set_architecture(MACH_TYPE_CHUMBY);
+
+	imx_dump_clocks();
+
+	return 0;
+}
+
+device_initcall(falconwing_devices_init);
+
+static struct device_d falconwing_serial_device = {
+	.name     = "stm_serial",
+	.map_base = IMX_DBGUART_BASE,
+	.size     = 8192,
+};
+
+static int falconwing_console_init(void)
+{
+	return register_device(&falconwing_serial_device);
+}
+
+console_initcall(falconwing_console_init);
+
+/** @page chumby Chumby Industrie's Falconwing aka "chumby one" (http://www.chumby.com/)
+
+This CPU card is based on a Freescale i.MX23 CPU. The card is shipped with:
+
+- 64 MiB synchronous dynamic RAM (DDR type)
+
+Memory layout when @b barebox is running:
+
+- 0x40000000 start of SDRAM
+- 0x40000100 start of kernel's boot parameters
+  - below malloc area: stack area
+  - below barebox: malloc area
+- 0x42000000 start of @b barebox
+*/
diff --git a/arch/arm/configs/chumbyone_defconfig b/arch/arm/configs/chumbyone_defconfig
new file mode 100644
index 0000000..a3d3e25
--- /dev/null
+++ b/arch/arm/configs/chumbyone_defconfig
@@ -0,0 +1,224 @@
+#
+# Automatically generated make config: don't edit
+# Linux barebox version: 2010.09.0
+# Thu Oct  7 16:36:33 2010
+#
+# CONFIG_BOARD_LINKER_SCRIPT is not set
+CONFIG_GENERIC_LINKER_SCRIPT=y
+CONFIG_ARM=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_IMX is not set
+CONFIG_ARCH_STM=y
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_S3C24xx is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+
+#
+# processor features
+#
+CONFIG_ARCH_TEXT_BASE=0x42000000
+CONFIG_BOARDINFO="Chumby Falconwing"
+
+#
+# SigmaTel/Freescale i.MX System-on-Chip
+#
+CONFIG_ARCH_IMX23=y
+# CONFIG_MACH_MX23EVK is not set
+CONFIG_MACH_CHUMBY=y
+
+#
+# Board specific settings       
+#
+CONFIG_AEABI=y
+
+#
+# Arm specific settings         
+#
+CONFIG_CMD_ARM_CPUINFO=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
+CONFIG_GREGORIAN_CALENDER=y
+CONFIG_HAS_KALLSYMS=y
+CONFIG_HAS_MODULES=y
+CONFIG_CMD_MEMORY=y
+CONFIG_ENV_HANDLING=y
+CONFIG_GENERIC_GPIO=y
+
+#
+# General Settings              
+#
+CONFIG_LOCALVERSION_AUTO=y
+
+#
+# memory layout                 
+#
+CONFIG_HAVE_MMU=y
+# CONFIG_MMU is not set
+CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y
+CONFIG_TEXT_BASE=0x42000000
+CONFIG_HAVE_CONFIGURABLE_MEMORY_LAYOUT=y
+CONFIG_MEMORY_LAYOUT_DEFAULT=y
+# CONFIG_MEMORY_LAYOUT_FIXED is not set
+CONFIG_STACK_SIZE=0x8000
+CONFIG_MALLOC_SIZE=0x400000
+CONFIG_BROKEN=y
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_PROMPT="chumby:"
+CONFIG_BAUDRATE=115200
+CONFIG_LONGHELP=y
+CONFIG_CBSIZE=1024
+CONFIG_MAXARGS=16
+CONFIG_SHELL_HUSH=y
+# CONFIG_SHELL_SIMPLE is not set
+# CONFIG_GLOB is not set
+CONFIG_PROMPT_HUSH_PS2="> "
+# CONFIG_HUSH_FANCY_PROMPT is not set
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+# CONFIG_MENU is not set
+# CONFIG_PASSWORD is not set
+CONFIG_DYNAMIC_CRC_TABLE=y
+CONFIG_ERRNO_MESSAGES=y
+CONFIG_TIMESTAMP=y
+CONFIG_CONSOLE_FULL=y
+CONFIG_CONSOLE_ACTIVATE_FIRST=y
+# CONFIG_OF_FLAT_TREE is not set
+CONFIG_PARTITION=y
+# CONFIG_DEFAULT_ENVIRONMENT is not set
+
+#
+# Debugging                     
+#
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_FLASH_NOISE is not set
+# CONFIG_ENABLE_PARTITION_NOISE is not set
+# CONFIG_ENABLE_DEVICE_NOISE is not set
+
+#
+# Commands                      
+#
+
+#
+# scripting                     
+#
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TRUE=y
+CONFIG_CMD_FALSE=y
+# CONFIG_CMD_LOGIN is not set
+# CONFIG_CMD_PASSWD is not set
+
+#
+# file commands                 
+#
+CONFIG_CMD_LS=y
+CONFIG_CMD_RM=y
+CONFIG_CMD_CAT=y
+CONFIG_CMD_MKDIR=y
+CONFIG_CMD_RMDIR=y
+CONFIG_CMD_CP=y
+CONFIG_CMD_PWD=y
+CONFIG_CMD_CD=y
+CONFIG_CMD_MOUNT=y
+CONFIG_CMD_UMOUNT=y
+
+#
+# console                       
+#
+CONFIG_CMD_CLEAR=y
+CONFIG_CMD_ECHO=y
+CONFIG_CMD_ECHO_E=y
+
+#
+# memory                        
+#
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_MEMINFO is not set
+# CONFIG_CMD_CRC is not set
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_MTEST_ALTERNATIVE=y
+
+#
+# flash                         
+#
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_UBI is not set
+
+#
+# booting                       
+#
+CONFIG_CMD_BOOTM=y
+# CONFIG_CMD_BOOTM_ZLIB is not set
+# CONFIG_CMD_BOOTM_BZLIB is not set
+# CONFIG_CMD_BOOTM_SHOW_TYPE is not set
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_BOOTU=y
+CONFIG_CMD_RESET=y
+# CONFIG_CMD_GO is not set
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_TEST=y
+CONFIG_CMD_VERSION=y
+CONFIG_CMD_HELP=y
+CONFIG_CMD_DEVINFO=y
+# CONFIG_CMD_GPIO is not set
+# CONFIG_CMD_UNLZO is not set
+# CONFIG_NET is not set
+
+#
+# Drivers                       
+#
+
+#
+# serial drivers                
+#
+# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
+CONFIG_DRIVER_SERIAL_STM378X=y
+# CONFIG_DRIVER_SERIAL_NS16550 is not set
+
+#
+# SPI drivers                   
+#
+# CONFIG_SPI is not set
+# CONFIG_I2C is not set
+
+#
+# flash drivers                 
+#
+# CONFIG_DRIVER_CFI is not set
+# CONFIG_MTD is not set
+# CONFIG_ATA is not set
+# CONFIG_USB is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_VIDEO is not set
+
+#
+# Filesystem support            
+#
+# CONFIG_FS_CRAMFS is not set
+CONFIG_FS_RAMFS=y
+CONFIG_FS_DEVFS=y
+CONFIG_CRC32=y
+# CONFIG_DIGEST is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_PROCESS_ESCAPE_SEQUENCE=y
diff --git a/arch/arm/mach-stm/Kconfig b/arch/arm/mach-stm/Kconfig
index bbdea51..021919a 100644
--- a/arch/arm/mach-stm/Kconfig
+++ b/arch/arm/mach-stm/Kconfig
@@ -3,9 +3,11 @@ if ARCH_STM
 config ARCH_TEXT_BASE
 	hex
 	default 0x41000000 if MACH_MX23EVK
+	default 0x42000000 if MACH_CHUMBY
 
 config BOARDINFO
 	default "Freescale i.MX23-EVK" if MACH_MX23EVK
+	default "Chumby Falconwing" if MACH_CHUMBY
 
 comment "SigmaTel/Freescale i.MX System-on-Chip"
 
@@ -28,6 +30,13 @@ config MACH_MX23EVK
 	help
 	  Say Y here if you are using the Freescale i.MX23-EVK board
 
+config MACH_CHUMBY
+	bool "Chumby Falconwing"
+	select HAVE_MMU
+	help
+	  Say Y here if you are using the "chumby one" aka falconwing from
+	  Chumby Industries
+
 endchoice
 
 endif
-- 
1.7.2.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox