From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 09/17] mfd mc13892: Add spi support
Date: Mon, 11 Oct 2010 13:28:17 +0200 [thread overview]
Message-ID: <1286796505-16049-10-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1286796505-16049-1-git-send-email-s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/freescale-mx35-3-stack/3stack.c | 2 +-
drivers/mfd/Kconfig | 2 +-
drivers/mfd/mc13892.c | 119 +++++++++++++++++++++--
3 files changed, 112 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boards/freescale-mx35-3-stack/3stack.c b/arch/arm/boards/freescale-mx35-3-stack/3stack.c
index 9b8d718..d6699cd 100644
--- a/arch/arm/boards/freescale-mx35-3-stack/3stack.c
+++ b/arch/arm/boards/freescale-mx35-3-stack/3stack.c
@@ -111,7 +111,7 @@ static struct device_d smc911x_dev = {
static struct i2c_board_info i2c_devices[] = {
{
- I2C_BOARD_INFO("mc13892", 0x08),
+ I2C_BOARD_INFO("mc13892-i2c", 0x08),
}, {
I2C_BOARD_INFO("mc9sdz60", 0x69),
},
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 7c27418..96440d8 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1,7 +1,7 @@
menu MFD
config I2C_MC13892
- depends on I2C
+ depends on I2C || SPI
bool "MC13892 a.k.a. PMIC driver"
config I2C_MC34704
diff --git a/drivers/mfd/mc13892.c b/drivers/mfd/mc13892.c
index 240a7a9..2f415fc 100644
--- a/drivers/mfd/mc13892.c
+++ b/drivers/mfd/mc13892.c
@@ -24,6 +24,7 @@
#include <driver.h>
#include <xfuncs.h>
#include <errno.h>
+#include <spi/spi.h>
#include <i2c/i2c.h>
#include <mfd/mc13892.h>
@@ -43,7 +44,56 @@ struct mc13892 *mc13892_get(void)
}
EXPORT_SYMBOL(mc13892_get);
-int mc13892_reg_read(struct mc13892 *mc13892, enum mc13892_reg reg, u32 *val)
+#ifdef CONFIG_SPI
+static int spi_rw(struct spi_device *spi, void * buf, size_t len)
+{
+ int ret;
+
+ struct spi_transfer t = {
+ .tx_buf = (const void *)buf,
+ .rx_buf = buf,
+ .len = len,
+ .cs_change = 0,
+ .delay_usecs = 0,
+ };
+ struct spi_message m;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+
+ if ((ret = spi_sync(spi, &m)))
+ return ret;
+ return 0;
+}
+
+#define MXC_PMIC_REG_NUM(reg) (((reg) & 0x3f) << 25)
+#define MXC_PMIC_WRITE (1 << 31)
+
+static int mc13892_spi_reg_read(struct mc13892 *mc13892, enum mc13892_reg reg, u32 *val)
+{
+ uint32_t buf;
+
+ buf = MXC_PMIC_REG_NUM(reg);
+
+ spi_rw(mc13892->spi, &buf, 4);
+
+ *val = buf;
+
+ return 0;
+}
+
+static int mc13892_spi_reg_write(struct mc13892 *mc13892, enum mc13892_reg reg, u32 val)
+{
+ uint32_t buf = MXC_PMIC_REG_NUM(reg) | MXC_PMIC_WRITE | (val & 0xffffff);
+
+ spi_rw(mc13892->spi, &buf, 4);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_I2C
+static int mc13892_i2c_reg_read(struct mc13892 *mc13892, enum mc13892_reg reg, u32 *val)
{
u8 buf[3];
int ret;
@@ -53,9 +103,8 @@ int mc13892_reg_read(struct mc13892 *mc13892, enum mc13892_reg reg, u32 *val)
return ret == 3 ? 0 : ret;
}
-EXPORT_SYMBOL(mc13892_reg_read)
-int mc13892_reg_write(struct mc13892 *mc13892, enum mc13892_reg reg, u32 val)
+static int mc13892_i2c_reg_write(struct mc13892 *mc13892, enum mc13892_reg reg, u32 val)
{
u8 buf[] = {
val >> 16,
@@ -68,8 +117,36 @@ int mc13892_reg_write(struct mc13892 *mc13892, enum mc13892_reg reg, u32 val)
return ret == 3 ? 0 : ret;
}
+#endif
+
+int mc13892_reg_write(struct mc13892 *mc13892, enum mc13892_reg reg, u32 val)
+{
+#ifdef CONFIG_I2C
+ if (mc13892->mode == MC13892_MODE_I2C)
+ return mc13892_i2c_reg_write(mc13892, reg, val);
+#endif
+#ifdef CONFIG_SPI
+ if (mc13892->mode == MC13892_MODE_SPI)
+ return mc13892_spi_reg_write(mc13892, reg, val);
+#endif
+ return -EINVAL;
+}
EXPORT_SYMBOL(mc13892_reg_write)
+int mc13892_reg_read(struct mc13892 *mc13892, enum mc13892_reg reg, u32 *val)
+{
+#ifdef CONFIG_I2C
+ if (mc13892->mode == MC13892_MODE_I2C)
+ return mc13892_i2c_reg_read(mc13892, reg, val);
+#endif
+#ifdef CONFIG_SPI
+ if (mc13892->mode == MC13892_MODE_SPI)
+ return mc13892_spi_reg_read(mc13892, reg, val);
+#endif
+ return -EINVAL;
+}
+EXPORT_SYMBOL(mc13892_reg_read)
+
int mc13892_set_bits(struct mc13892 *mc13892, enum mc13892_reg reg, u32 mask, u32 val)
{
u32 tmp;
@@ -133,14 +210,22 @@ static struct file_operations mc_fops = {
.write = mc_write,
};
-static int mc_probe(struct device_d *dev)
+static int mc_probe(struct device_d *dev, enum mc13892_mode mode)
{
if (mc_dev)
return -EBUSY;
mc_dev = xzalloc(sizeof(struct mc13892));
+ mc_dev->mode = mode;
mc_dev->cdev.name = DRIVERNAME;
- mc_dev->client = to_i2c_client(dev);
+ if (mode == MC13892_MODE_I2C) {
+ mc_dev->client = to_i2c_client(dev);
+ }
+ if (mode == MC13892_MODE_SPI) {
+ mc_dev->spi = dev->type_data;
+ mc_dev->spi->mode = SPI_MODE_0 | SPI_CS_HIGH;
+ mc_dev->spi->bits_per_word = 32;
+ }
mc_dev->cdev.size = 256;
mc_dev->cdev.dev = dev;
mc_dev->cdev.ops = &mc_fops;
@@ -150,14 +235,30 @@ static int mc_probe(struct device_d *dev)
return 0;
}
-static struct driver_d mc_driver = {
- .name = DRIVERNAME,
- .probe = mc_probe,
+static int mc_i2c_probe(struct device_d *dev)
+{
+ return mc_probe(dev, MC13892_MODE_I2C);
+}
+
+static int mc_spi_probe(struct device_d *dev)
+{
+ return mc_probe(dev, MC13892_MODE_SPI);
+}
+
+static struct driver_d mc_i2c_driver = {
+ .name = "mc13892-i2c",
+ .probe = mc_i2c_probe,
+};
+
+static struct driver_d mc_spi_driver = {
+ .name = "mc13892-spi",
+ .probe = mc_spi_probe,
};
static int mc_init(void)
{
- register_driver(&mc_driver);
+ register_driver(&mc_i2c_driver);
+ register_driver(&mc_spi_driver);
return 0;
}
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2010-10-11 11:28 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-11 11:28 Patches for -next Sascha Hauer
2010-10-11 11:28 ` [PATCH 01/17] i.MX27: Add support for SDHC pins Sascha Hauer
2010-10-11 11:28 ` [PATCH 02/17] mci: Add i.MX esdhc support Sascha Hauer
2010-10-11 11:28 ` [PATCH 03/17] mci: print error code on failure Sascha Hauer
2010-10-11 11:28 ` [PATCH 04/17] spi i.MX: add spi version namespace to register defines Sascha Hauer
2010-10-11 11:28 ` [PATCH 05/17] spi i.MX: redirect functions to version specific functions Sascha Hauer
2010-10-11 11:28 ` [PATCH 06/17] spi i.MX: Add i.MX51 support Sascha Hauer
2010-10-11 11:28 ` [PATCH 07/17] Move mfd drivers to drivers/mfd Sascha Hauer
2010-10-11 11:28 ` [PATCH 08/17] move include files for mfd drivers to include/mfd Sascha Hauer
2010-10-11 11:28 ` Sascha Hauer [this message]
2010-10-11 11:28 ` [PATCH 10/17] mfd mc13892: support reading the revision Sascha Hauer
2010-10-11 11:28 ` [PATCH 11/17] mci: handle SD cards < 2.0 correctly Sascha Hauer
2010-10-11 12:48 ` Juergen Beisert
2010-10-11 13:07 ` Belisko Marek
2010-10-11 13:47 ` Juergen Beisert
2010-10-11 12:53 ` Juergen Beisert
2010-10-11 11:28 ` [PATCH 12/17] mci: align write buffer if necessary Sascha Hauer
2010-10-11 11:28 ` [PATCH 13/17] defaultenv: handle disk partitions Sascha Hauer
2010-10-11 12:26 ` Juergen Beisert
2010-10-11 12:50 ` Sascha Hauer
2010-10-11 12:59 ` Juergen Beisert
2010-10-11 13:54 ` Sascha Hauer
2010-10-11 14:22 ` Juergen Beisert
2010-10-12 6:51 ` Jean-Christophe PLAGNIOL-VILLARD
2010-10-11 11:28 ` [PATCH 14/17] imx_serial: Add mx51 support Sascha Hauer
2010-10-11 11:28 ` [PATCH 15/17] ARM mmu: Call __mmu_cache_flush instead of hardcoded v4/v5 only function Sascha Hauer
2010-10-11 11:28 ` [PATCH 16/17] ARM i.MX: Add basic i.MX51 support Sascha Hauer
2010-10-11 11:28 ` [PATCH 17/17] ARM i.MX51: Add babbage board support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1286796505-16049-10-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox