From: Juergen Beisert <jbe@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 06/11] Adapt the existing imx-ipu fb driver to support runtime videomode selection
Date: Fri, 19 Nov 2010 13:50:58 +0100 [thread overview]
Message-ID: <1290171063-28870-7-git-send-email-jbe@pengutronix.de> (raw)
In-Reply-To: <1290171063-28870-1-git-send-email-jbe@pengutronix.de>
Adapt the API to the new framebuffer videomode selection at runtime.
NOTE: Due to the lack of hardware, this is compile time tested only.
This is patch 4 of 4 to keep the repository bisectable.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
arch/arm/boards/freescale-mx35-3-stack/3stack.c | 2 +-
arch/arm/boards/pcm043/pcm043.c | 2 +-
arch/arm/mach-imx/include/mach/imx-ipu-fb.h | 12 +-
drivers/video/imx-ipu-fb.c | 217 +++++++++++++----------
4 files changed, 125 insertions(+), 108 deletions(-)
diff --git a/arch/arm/boards/freescale-mx35-3-stack/3stack.c b/arch/arm/boards/freescale-mx35-3-stack/3stack.c
index 127bfb4..d2b8262 100644
--- a/arch/arm/boards/freescale-mx35-3-stack/3stack.c
+++ b/arch/arm/boards/freescale-mx35-3-stack/3stack.c
@@ -126,7 +126,7 @@ static struct fb_videomode CTP_CLAA070LC0ACW = {
.lower_margin = 10, /* whole frame should have 500 lines */
.hsync_len = 1, /* note: DE only display */
.vsync_len = 1, /* note: DE only display */
- .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
+ .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_DE_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
};
diff --git a/arch/arm/boards/pcm043/pcm043.c b/arch/arm/boards/pcm043/pcm043.c
index 2191bc8..c504440 100644
--- a/arch/arm/boards/pcm043/pcm043.c
+++ b/arch/arm/boards/pcm043/pcm043.c
@@ -111,7 +111,7 @@ static struct fb_videomode pcm043_fb_mode = {
.lower_margin = 40,
.hsync_len = 96,
.vsync_len = 1,
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_DE_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
};
diff --git a/arch/arm/mach-imx/include/mach/imx-ipu-fb.h b/arch/arm/mach-imx/include/mach/imx-ipu-fb.h
index 8e1cc87..ce95243 100644
--- a/arch/arm/mach-imx/include/mach/imx-ipu-fb.h
+++ b/arch/arm/mach-imx/include/mach/imx-ipu-fb.h
@@ -12,20 +12,12 @@
#include <fb.h>
-/* Proprietary FB_SYNC_ flags */
-#define FB_SYNC_OE_ACT_HIGH 0x80000000
-#define FB_SYNC_CLK_INVERT 0x40000000
-#define FB_SYNC_DATA_INVERT 0x20000000
-#define FB_SYNC_CLK_IDLE_EN 0x10000000
-#define FB_SYNC_SHARP_MODE 0x08000000
-#define FB_SYNC_SWAP_RGB 0x04000000
-#define FB_SYNC_CLK_SEL_EN 0x02000000
-
/*
- * struct mx3fb_platform_data - mx3fb platform data
+ * struct imx_ipu_fb_platform_data - imx-ipu-fb's platform data
*/
struct imx_ipu_fb_platform_data {
struct fb_videomode *mode;
+ unsigned mode_cnt; /**< number of entries in 'mode' */
unsigned char bpp;
void __iomem *framebuffer;
/** hook to enable backlight and stuff */
diff --git a/drivers/video/imx-ipu-fb.c b/drivers/video/imx-ipu-fb.c
index c38082d..866d711 100644
--- a/drivers/video/imx-ipu-fb.c
+++ b/drivers/video/imx-ipu-fb.c
@@ -34,12 +34,12 @@
#include <mach/clock.h>
struct ipu_fb_info {
+ struct fb_host fb_host; /**< myself */
void __iomem *regs;
void (*enable)(int enable);
- struct fb_info info;
- struct device_d *dev;
+ const struct fb_videomode *mode; /**< requested videomodue */
};
/* IPU DMA Controller channel definitions. */
@@ -413,29 +413,30 @@ static inline void reg_write(struct ipu_fb_info *fbi, u32 value,
writel(value, fbi->regs + reg);
}
+#define fb_info_to_imxfb_info(x) ((struct ipu_fb_info*)((x)->host))
+
/*
* sdc_init_panel() - initialize a synchronous LCD panel.
- * @width: width of panel in pixels.
- * @height: height of panel in pixels.
- * @pixel_fmt: pixel format of buffer as FOURCC ASCII code.
+ * @param info The framebuffer to work on
+ * @param pixel_fmt pixel format of buffer as FOURCC ASCII code.
* @return: 0 on success or negative error code on failure.
*/
-static int sdc_init_panel(struct fb_info *info, enum pixel_fmt pixel_fmt)
+static int sdc_init_panel(struct fb_info *fb_info, enum pixel_fmt pixel_fmt)
{
- struct ipu_fb_info *fbi = info->priv;
- struct fb_videomode *mode = info->mode;
+ struct ipu_fb_info *fbi = fb_info_to_imxfb_info(fb_info);
+ const struct fb_videomode *mode = fbi->mode;
u32 reg, old_conf, div;
enum ipu_panel panel = IPU_PANEL_TFT;
unsigned long pixel_clk;
/* Init panel size and blanking periods */
reg = ((mode->hsync_len - 1) << 26) |
- ((info->xres + mode->left_margin + mode->right_margin +
+ ((mode->xres + mode->left_margin + mode->right_margin +
mode->hsync_len - 1) << 16);
reg_write(fbi, reg, SDC_HOR_CONF);
reg = ((mode->vsync_len - 1) << 26) | SDC_V_SYNC_WIDTH_L |
- ((info->yres + mode->upper_margin + mode->lower_margin +
+ ((mode->yres + mode->upper_margin + mode->lower_margin +
mode->vsync_len - 1) << 16);
reg_write(fbi, reg, SDC_VER_CONF);
@@ -448,7 +449,7 @@ static int sdc_init_panel(struct fb_info *info, enum pixel_fmt pixel_fmt)
old_conf |= DI_D3_CLK_POL;
if (mode->sync & FB_SYNC_DATA_INVERT)
old_conf |= DI_D3_DATA_POL;
- if (mode->sync & FB_SYNC_OE_ACT_HIGH)
+ if (mode->sync & FB_SYNC_DE_HIGH_ACT)
old_conf |= DI_D3_DRDY_SHARP_POL;
reg_write(fbi, old_conf, DI_DISP_SIG_POL);
@@ -483,12 +484,12 @@ static int sdc_init_panel(struct fb_info *info, enum pixel_fmt pixel_fmt)
div = imx_get_lcdclk() * 16 / pixel_clk;
if (div < 0x40) { /* Divider less than 4 */
- dev_dbg(&info->dev,
+ dev_dbg(fbi->fb_host.hw_dev,
"InitPanel() - Pixel clock divider less than 4\n");
div = 0x40;
}
- dev_dbg(&info->dev, "pixel clk = %u, divider %u.%u\n",
+ dev_dbg(fbi->fb_host.hw_dev, "pixel clk = %u, divider %u.%u\n",
pixel_clk, div >> 4, (div & 7) * 125);
/*
@@ -588,19 +589,20 @@ static u32 dma_param_addr(enum ipu_channel channel)
return 0x10000 | (channel << 4);
}
-static void ipu_init_channel_buffer(struct ipu_fb_info *fbi,
+static void ipu_init_channel_buffer(struct fb_info *fb_info,
enum ipu_channel channel, void *fbmem)
{
+ struct ipu_fb_info *fbi = fb_info_to_imxfb_info(fb_info);
union chan_param_mem params = {};
u32 reg;
u32 stride_bytes;
- stride_bytes = fbi->info.xres * ((fbi->info.bits_per_pixel + 7) / 8);
+ stride_bytes = fbi->mode->xres * ((fb_info->bits_per_pixel + 7) / 8);
stride_bytes = (stride_bytes + 3) & ~3;
/* Build parameter memory data for DMA channel */
- ipu_ch_param_set_size(¶ms, bpp_to_pixfmt(fbi->info.bits_per_pixel),
- fbi->info.xres, fbi->info.yres, stride_bytes);
+ ipu_ch_param_set_size(¶ms, bpp_to_pixfmt(fb_info->bits_per_pixel),
+ fbi->mode->xres, fbi->mode->yres, stride_bytes);
ipu_ch_param_set_buffer(¶ms, fbmem, NULL);
params.pp.bam = 0;
/* Some channels (rotation) have restriction on burst length */
@@ -622,9 +624,10 @@ static void ipu_init_channel_buffer(struct ipu_fb_info *fbi,
reg_write(fbi, reg, IPU_CHA_DB_MODE_SEL);
}
-static void ipu_channel_set_priority(struct ipu_fb_info *fbi,
+static void ipu_channel_set_priority(struct fb_info *fb_info,
enum ipu_channel channel, int prio)
{
+ struct ipu_fb_info *fbi = fb_info_to_imxfb_info(fb_info);
u32 reg;
reg = reg_read(fbi, IDMAC_CHA_PRI);
@@ -639,11 +642,13 @@ static void ipu_channel_set_priority(struct ipu_fb_info *fbi,
/*
* ipu_enable_channel() - enable an IPU channel.
+ * @param fb_info The framebuffer to work on
* @channel: channel ID.
* @return: 0 on success or negative error code on failure.
*/
-static int ipu_enable_channel(struct ipu_fb_info *fbi, enum ipu_channel channel)
+static int ipu_enable_channel(struct fb_info *fb_info, enum ipu_channel channel)
{
+ struct ipu_fb_info *fbi = fb_info_to_imxfb_info(fb_info);
u32 reg;
/* Reset to buffer 0 */
@@ -651,7 +656,7 @@ static int ipu_enable_channel(struct ipu_fb_info *fbi, enum ipu_channel channel)
switch (channel) {
case IDMAC_SDC_0:
- ipu_channel_set_priority(fbi, channel, 1);
+ ipu_channel_set_priority(fb_info, channel, 1);
break;
default:
break;
@@ -663,9 +668,10 @@ static int ipu_enable_channel(struct ipu_fb_info *fbi, enum ipu_channel channel)
return 0;
}
-static int ipu_update_channel_buffer(struct ipu_fb_info *fbi,
+static int ipu_update_channel_buffer(struct fb_info *fb_info,
enum ipu_channel channel, void *buf)
{
+ struct ipu_fb_info *fbi = fb_info_to_imxfb_info(fb_info);
u32 reg;
reg = reg_read(fbi, IPU_CHA_BUF0_RDY);
@@ -679,16 +685,17 @@ static int ipu_update_channel_buffer(struct ipu_fb_info *fbi,
return 0;
}
-static int idmac_tx_submit(struct ipu_fb_info *fbi, enum ipu_channel channel,
+static int idmac_tx_submit(struct fb_info *fb_info, enum ipu_channel channel,
void *buf)
{
+ struct ipu_fb_info *fbi = fb_info_to_imxfb_info(fb_info);
int ret;
- ipu_init_channel_buffer(fbi, channel, buf);
+ ipu_init_channel_buffer(fb_info, channel, buf);
/* ipu_idmac.c::ipu_submit_channel_buffers() */
- ret = ipu_update_channel_buffer(fbi, channel, buf);
+ ret = ipu_update_channel_buffer(fb_info, channel, buf);
if (ret < 0)
return ret;
@@ -697,16 +704,17 @@ static int idmac_tx_submit(struct ipu_fb_info *fbi, enum ipu_channel channel,
reg_write(fbi, 1UL << channel, IPU_CHA_BUF0_RDY);
- ret = ipu_enable_channel(fbi, channel);
+ ret = ipu_enable_channel(fb_info, channel);
return ret;
}
-static void sdc_enable_channel(struct ipu_fb_info *fbi, void *fbmem)
+static void sdc_enable_channel(struct fb_info *fb_info, void *fbmem)
{
+ struct ipu_fb_info *fbi = fb_info_to_imxfb_info(fb_info);
int ret;
u32 reg;
- ret = idmac_tx_submit(fbi, IDMAC_SDC_0, fbmem);
+ ret = idmac_tx_submit(fb_info, IDMAC_SDC_0, fbmem);
/* mx3fb.c::sdc_fb_init() */
if (ret >= 0) {
@@ -722,11 +730,75 @@ static void sdc_enable_channel(struct ipu_fb_info *fbi, void *fbmem)
mdelay(2);
}
+static void imxfb_init_info(struct fb_info *fb_info,
+ const struct fb_videomode *mode)
+{
+ struct imx_ipu_fb_rgb *rgb;
+
+ fb_info->xres = mode->xres;
+ fb_info->yres = mode->yres;
+
+ switch (fb_info->bits_per_pixel) {
+ case 32:
+ rgb = &def_rgb_32;
+ break;
+ case 24:
+ rgb = &def_rgb_24;
+ break;
+ case 16:
+ default:
+ rgb = &def_rgb_16;
+ break;
+ }
+
+ /*
+ * Copy the RGB parameters for this display
+ * from the machine specific parameters.
+ */
+ fb_info->red = rgb->red;
+ fb_info->green = rgb->green;
+ fb_info->blue = rgb->blue;
+ fb_info->transp = rgb->transp;
+}
+
+static void imxfb_memory_mmgt(struct fb_info *fb_info, unsigned size)
+{
+ if ((fb_info->fb_dev.size < size) && (fb_info->fb_dev.size != 0)) {
+ free((void*)fb_info->fb_dev.map_base);
+ fb_info->fb_dev.map_base = 0;
+ fb_info->fb_dev.size = 0;
+ }
+ if (fb_info->fb_dev.size == 0) {
+ fb_info->fb_dev.map_base = (resource_size_t)xzalloc(size);
+ fb_info->fb_dev.size = size;
+ }
+}
+
+static int ipu_fb_initialize_mode(struct fb_info *fb_info,
+ const struct fb_videomode *mode)
+{
+ struct ipu_fb_info *fbi = fb_info_to_imxfb_info(fb_info);
+ unsigned size;
+
+ /*
+ * we need at least this amount of memory for the framebuffer
+ */
+ size = mode->xres * mode->yres * (fb_info->bits_per_pixel >> 3);
+
+ imxfb_memory_mmgt(fb_info, size);
+
+ fbi->mode = mode;
+
+ imxfb_init_info(fb_info, mode);
+
+ return 0;
+}
+
/* References in this function refer to respective Linux kernel sources */
-static void ipu_fb_enable(struct fb_info *info)
+static void ipu_fb_enable(struct fb_info *fb_info)
{
- struct ipu_fb_info *fbi = info->priv;
- struct fb_videomode *mode = info->mode;
+ struct ipu_fb_info *fbi = fb_info_to_imxfb_info(fb_info);
+ const struct fb_videomode *mode = fbi->mode;
u32 reg;
/* pcm037.c::mxc_board_init() */
@@ -779,12 +851,12 @@ static void ipu_fb_enable(struct fb_info *info)
~(SDC_COM_GWSEL | SDC_COM_KEY_COLOR_G);
reg_write(fbi, reg, SDC_COM_CONF);
- sdc_init_panel(info, IPU_PIX_FMT_RGB666);
+ sdc_init_panel(fb_info, IPU_PIX_FMT_RGB666);
reg_write(fbi, (mode->left_margin << 16) | mode->upper_margin,
SDC_BG_POS);
- sdc_enable_channel(fbi, info->screen_base);
+ sdc_enable_channel(fb_info, (void*)fb_info->fb_dev.map_base);
/*
* Linux driver calls sdc_set_brightness() here again,
@@ -796,7 +868,7 @@ static void ipu_fb_enable(struct fb_info *info)
static void ipu_fb_disable(struct fb_info *info)
{
- struct ipu_fb_info *fbi = info->priv;
+ struct ipu_fb_info *fbi = fb_info_to_imxfb_info(info);
u32 reg;
if (fbi->enable)
@@ -807,85 +879,38 @@ static void ipu_fb_disable(struct fb_info *info)
reg_write(fbi, reg, SDC_COM_CONF);
}
-static struct fb_ops imxfb_ops = {
- .fb_enable = ipu_fb_enable,
- .fb_disable = ipu_fb_disable,
-};
-
-static void imxfb_init_info(struct fb_info *info, struct fb_videomode *mode,
- int bpp)
-{
- struct imx_ipu_fb_rgb *rgb;
-
- info->mode = mode;
- info->xres = mode->xres;
- info->yres = mode->yres;
- info->bits_per_pixel = bpp;
-
- switch (info->bits_per_pixel) {
- case 32:
- rgb = &def_rgb_32;
- break;
- case 24:
- rgb = &def_rgb_24;
- break;
- case 16:
- default:
- rgb = &def_rgb_16;
- break;
- }
-
- /*
- * Copy the RGB parameters for this display
- * from the machine specific parameters.
- */
- info->red = rgb->red;
- info->green = rgb->green;
- info->blue = rgb->blue;
- info->transp = rgb->transp;
-}
-
static int imxfb_probe(struct device_d *dev)
{
struct ipu_fb_info *fbi;
- struct fb_info *info;
+ struct device_d *fb_dev;
const struct imx_ipu_fb_platform_data *pdata = dev->platform_data;
- int ret;
if (!pdata)
return -ENODEV;
fbi = xzalloc(sizeof(*fbi));
- info = &fbi->info;
+
+ /* add runtime hardware info */
+ fbi->fb_host.hw_dev = dev;
+ fbi->fb_host.fb_mode = ipu_fb_initialize_mode;
+ fbi->fb_host.fb_enable = ipu_fb_enable;
+ fbi->fb_host.fb_disable = ipu_fb_disable;
+ fbi->fb_host.fb_setcolreg = NULL;
fbi->regs = (void *)dev->map_base;
- fbi->dev = dev;
- info->priv = fbi;
- info->fbops = &imxfb_ops;
- fbi->enable = pdata->enable;
- imxfb_init_info(info, pdata->mode, pdata->bpp);
+ /* add runtime video info */
+ fbi->fb_host.mode = pdata->mode;
+ /* to be backward compatible */
+ fbi->fb_host.mode_cnt = pdata->mode_cnt == 0 ? 1 : pdata->mode_cnt;
+ fbi->fb_host.bits_per_pixel = pdata->bpp;
dev_info(dev, "i.MX Framebuffer driver\n");
- /*
- * Use a given frambuffer or reserve some
- * memory for screen usage
- */
- fbi->info.screen_base = pdata->framebuffer;
- if (fbi->info.screen_base == NULL) {
- fbi->info.screen_base = malloc(info->xres * info->yres *
- (info->bits_per_pixel >> 3));
- if (!fbi->info.screen_base)
- return -ENOMEM;
- }
-
- sdc_enable_channel(fbi, info->screen_base);
-
- ret = register_framebuffer(&fbi->info);
- if (ret < 0) {
+ fb_dev = register_framebuffer(&fbi->fb_host);
+ if (fb_dev == NULL) {
dev_err(dev, "failed to register framebuffer\n");
- return ret;
+ return -EINVAL;
}
return 0;
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2010-11-19 12:51 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-19 12:50 [PATCHv3] Add dynamic video initialization to barebox Juergen Beisert
2010-11-19 12:50 ` [PATCH 01/11] Separate framebuffer platformdata and the videomode Juergen Beisert
2010-11-19 12:50 ` [PATCH 02/11] Add more flags for sync control Juergen Beisert
2010-11-19 12:50 ` [PATCH 03/11] Bring in dynamic videomode selection at runtime Juergen Beisert
2010-11-19 12:50 ` [PATCH 04/11] Add verbose framebuffer device info Juergen Beisert
2010-11-19 12:50 ` [PATCH 05/11] Adapt the existing imx fb driver to support runtime videomode selection Juergen Beisert
2010-11-19 12:50 ` Juergen Beisert [this message]
2010-11-19 12:50 ` [PATCH 07/11] Remove variable size restrictions Juergen Beisert
2010-11-19 12:51 ` [PATCH 08/11] Add doxygen documentation to the framebfuffer code Juergen Beisert
2010-11-19 12:51 ` [PATCH 09/11] Provide more driver specific data in a videomode Juergen Beisert
2010-11-19 12:51 ` [PATCH 10/11] Add a video driver for S3C2440 bases platforms Juergen Beisert
2010-11-19 12:51 ` [PATCH 11/11] STM378x: Add video driver for this platform Juergen Beisert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1290171063-28870-7-git-send-email-jbe@pengutronix.de \
--to=jbe@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox