From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>,
Patrice Vilchez <patrice.vilchez@atmel.com>
Subject: [PATCH 03/12] cfi_flash: move flash_read_uchar from inline to noinline
Date: Fri, 26 Nov 2010 20:52:32 +0100 [thread overview]
Message-ID: <1290801161-2417-3-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <20101126194353.GH26540@game.jcrosoft.org>
it will reduce the binary size of 28 bytes
and fix some issue observerd during the porting of the at91rm9200ek
when reading the device_id and manufacturor_id
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
drivers/nor/cfi_flash.c | 15 +++++++++++++++
drivers/nor/cfi_flash.h | 15 +--------------
2 files changed, 16 insertions(+), 14 deletions(-)
diff --git a/drivers/nor/cfi_flash.c b/drivers/nor/cfi_flash.c
index 08e45ef..0efe0d4 100644
--- a/drivers/nor/cfi_flash.c
+++ b/drivers/nor/cfi_flash.c
@@ -186,6 +186,21 @@ static void flash_printqry (struct flash_info *info, flash_sect_t sect)
#endif
/*
+ * read a character at a port width address
+ */
+uchar flash_read_uchar (struct flash_info *info, uint offset)
+{
+ uchar *cp;
+
+ cp = flash_make_addr (info, 0, offset);
+#if defined(__LITTLE_ENDIAN)
+ return (cp[0]);
+#else
+ return (cp[info->portwidth - 1]);
+#endif
+}
+
+/*
* read a short word by swapping for ppc format.
*/
static ushort flash_read_ushort (struct flash_info *info, flash_sect_t sect, uint offset)
diff --git a/drivers/nor/cfi_flash.h b/drivers/nor/cfi_flash.h
index 047a035..9a299db 100644
--- a/drivers/nor/cfi_flash.h
+++ b/drivers/nor/cfi_flash.h
@@ -211,20 +211,7 @@ static inline uchar *flash_make_addr (struct flash_info *info, flash_sect_t sect
return ((uchar *) (info->start[sect] + (offset * info->portwidth)));
}
-/*
- * read a character at a port width address
- */
-static inline uchar flash_read_uchar (struct flash_info *info, uint offset)
-{
- uchar *cp;
-
- cp = flash_make_addr (info, 0, offset);
-#if defined(__LITTLE_ENDIAN)
- return (cp[0]);
-#else
- return (cp[info->portwidth - 1]);
-#endif
-}
+uchar flash_read_uchar (struct flash_info *info, uint offset);
#ifdef CONFIG_DRIVER_CFI_BANK_WIDTH_1
#define bankwidth_is_1(info) (info->portwidth == 1)
--
1.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2010-11-26 19:56 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-26 19:43 [PATCH 0/12] cfi_flash: improvment Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` [PATCH 01/12] cfi_flash: move intel real protect flash support to cfi_flash_intel.c Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` [PATCH 02/12] cfi_flash: add Atmel real protect flash support Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2010-11-26 19:52 ` [PATCH 04/12] cfi_flash: use amd and standard reset flash command at probing Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` [PATCH 05/12] cfi_flash: synchronize command offsets with Linux CFI driver Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` [PATCH 06/12] cfi_flash: update manufacturer id flash support Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` [PATCH 07/12] cfi_flash: Introduce read and write accessors Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` [PATCH 08/12] cfi_flash: Read whole QRY structure in one go Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` [PATCH 09/12] cfi_flash: do not reset flash when probe fails Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` [PATCH 10/12] cfi_flash: move reset command assigment to specific chipset init function Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` [PATCH 11/12] cfi_flash: introduce flash cmdset fixup Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` [PATCH 12/12] cfi_flash_amd: Add manufacturer-specific fixups Jean-Christophe PLAGNIOL-VILLARD
2010-11-29 20:53 ` [PATCH 0/12] cfi_flash: improvment Sascha Hauer
2010-11-30 13:44 ` Jean-Christophe PLAGNIOL-VILLARD
2010-12-02 17:52 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1290801161-2417-3-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
--cc=nicolas.ferre@atmel.com \
--cc=patrice.vilchez@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox