From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>,
Patrice Vilchez <patrice.vilchez@atmel.com>,
Haavard Skinnemoen <hskinnemoen@atmel.com>
Subject: [PATCH 08/12] cfi_flash: Read whole QRY structure in one go
Date: Fri, 26 Nov 2010 20:52:37 +0100 [thread overview]
Message-ID: <1290801161-2417-8-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <20101126194353.GH26540@game.jcrosoft.org>
Read out the whole CFI Standard Query structure after successful cfi
identification. This allows subsequent code to access this information
directly without having to go through flash_read_uchar() and friends.
based on U-Boot
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
drivers/nor/cfi_flash.c | 149 ++++++++++++++++++------------------------
drivers/nor/cfi_flash.h | 33 ++++++++++
drivers/nor/cfi_flash_amd.c | 3 +-
3 files changed, 99 insertions(+), 86 deletions(-)
diff --git a/drivers/nor/cfi_flash.c b/drivers/nor/cfi_flash.c
index 2ac4e7c..041fb92 100644
--- a/drivers/nor/cfi_flash.c
+++ b/drivers/nor/cfi_flash.c
@@ -61,8 +61,6 @@
*
*/
-#define NUM_ERASE_REGIONS 4 /* max. number of erase regions */
-
static uint flash_offset_cfi[2]={FLASH_OFFSET_CFI,FLASH_OFFSET_CFI_ALT};
/*
@@ -159,29 +157,25 @@ void print_longlong (char *str, unsigned long long data)
sprintf (&str[i * 2], "%2.2x", *cp++);
}
-static void flash_printqry (struct flash_info *info, flash_sect_t sect)
+static void flash_printqry (struct cfi_qry *qry)
{
- cfiptr_t cptr;
+ u8 *p = (u8 *)qry;
int x, y;
unsigned char c;
- for (x = 0; x < 0x40; x += 16U / info->portwidth) {
- cptr.cp =
- flash_make_addr (info, sect,
- x + FLASH_OFFSET_CFI_RESP);
- debug ("%p : ", cptr.cp);
- for (y = 0; y < 16; y++) {
- debug ("%2.2x ", cptr.cp[y]);
- }
- debug (" ");
+ for (x = 0; x < sizeof(struct cfi_qry); x += 16) {
+ debug("%02x : ", x);
+ for (y = 0; y < 16; y++)
+ debug("%2.2x ", p[x + y]);
+ debug(" ");
for (y = 0; y < 16; y++) {
- if (cptr.cp[y] >= 0x20 && cptr.cp[y] <= 0x7e) {
- debug ("%c", cptr.cp[y]);
- } else {
- debug (".");
- }
+ c = p[x + y];
+ if (c >= 0x20 && c <= 0x7e)
+ debug("%c", c);
+ else
+ debug(".");
}
- debug ("\n");
+ debug("\n");
}
}
#endif
@@ -202,37 +196,6 @@ uchar flash_read_uchar (struct flash_info *info, uint offset)
}
/*
- * read a short word by swapping for ppc format.
- */
-static ushort flash_read_ushort (struct flash_info *info, flash_sect_t sect, uint offset)
-{
- uchar *addr;
- ushort retval;
-
-#ifdef DEBUG
- int x;
-#endif
- addr = flash_make_addr (info, sect, offset);
-
-#ifdef DEBUG
- debug ("ushort addr is at %p info->portwidth = %d\n", addr,
- info->portwidth);
- for (x = 0; x < 2 * info->portwidth; x++) {
- debug ("addr[%x] = 0x%x\n", x, addr[x]);
- }
-#endif
-#if defined(__LITTLE_ENDIAN)
- retval = ((addr[(info->portwidth)] << 8) | addr[0]);
-#else
- retval = ((addr[(2 * info->portwidth) - 1] << 8) |
- addr[info->portwidth - 1]);
-#endif
-
- debug ("retval = 0x%x\n", retval);
- return retval;
-}
-
-/*
* read a long word by picking the least significant byte of each maximum
* port size word. Swap for ppc format.
*/
@@ -290,7 +253,17 @@ u32 jedec_read_mfr(struct flash_info *info)
return mfr;
}
-static int flash_detect_cfi (struct flash_info *info)
+static void flash_read_cfi (struct flash_info *info, void *buf,
+ unsigned int start, size_t len)
+{
+ u8 *p = buf;
+ unsigned int i;
+
+ for (i = 0; i < len; i++)
+ p[i] = flash_read_uchar(info, start + i);
+}
+
+static int flash_detect_cfi (struct flash_info *info, struct cfi_qry *qry)
{
int cfi_offset;
debug ("flash detect cfi\n");
@@ -307,7 +280,10 @@ static int flash_detect_cfi (struct flash_info *info)
if (flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP, 'Q')
&& flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R')
&& flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) {
- info->interface = flash_read_ushort (info, 0, FLASH_OFFSET_INTERFACE);
+ flash_read_cfi(info, qry, FLASH_OFFSET_CFI_RESP,
+ sizeof(struct cfi_qry));
+ info->interface = le16_to_cpu(qry->interface_desc);
+
info->cfi_offset=flash_offset_cfi[cfi_offset];
debug ("device interface is %d\n",
info->interface);
@@ -340,6 +316,9 @@ static ulong flash_get_size (struct flash_info *info, ulong base)
int erase_region_count;
int geometry_reversed = 0;
int cur_offset = 0;
+ struct cfi_qry qry;
+
+ memset(&qry, 0, sizeof(qry));
info->ext_addr = 0;
info->cfi_version = 0;
@@ -353,9 +332,22 @@ static ulong flash_get_size (struct flash_info *info, ulong base)
info->start[0] = base;
info->protect = 0;
- if (flash_detect_cfi (info)) {
- info->vendor = flash_read_ushort (info, 0,
- FLASH_OFFSET_PRIMARY_VENDOR);
+ if (flash_detect_cfi (info, &qry)) {
+ info->vendor = le16_to_cpu(qry.p_id);
+ info->ext_addr = le16_to_cpu(qry.p_adr);
+ num_erase_regions = qry.num_erase_regions;
+
+ if (info->ext_addr) {
+ info->cfi_version = (ushort) flash_read_uchar (info,
+ info->ext_addr + 3) << 8;
+ info->cfi_version |= (ushort) flash_read_uchar (info,
+ info->ext_addr + 4);
+ }
+
+#ifdef DEBUG
+ flash_printqry (&qry);
+#endif
+
switch (info->vendor) {
#ifdef CONFIG_DRIVER_CFI_INTEL
case CFI_CMDSET_INTEL_EXTENDED:
@@ -375,19 +367,7 @@ static ulong flash_get_size (struct flash_info *info, ulong base)
}
info->cfi_cmd_set->flash_read_jedec_ids (info);
flash_write_cmd (info, 0, info->cfi_offset, FLASH_CMD_CFI);
- num_erase_regions = flash_read_uchar (info,
- FLASH_OFFSET_NUM_ERASE_REGIONS);
- info->ext_addr = flash_read_ushort (info, 0,
- FLASH_OFFSET_EXT_QUERY_T_P_ADDR);
- if (info->ext_addr) {
- info->cfi_version = (ushort) flash_read_uchar (info,
- info->ext_addr + 3) << 8;
- info->cfi_version |= (ushort) flash_read_uchar (info,
- info->ext_addr + 4);
- }
-#ifdef DEBUG
- flash_printqry (info, 0);
-#endif
+
switch (info->vendor) {
case CFI_CMDSET_INTEL_STANDARD:
case CFI_CMDSET_INTEL_EXTENDED:
@@ -445,6 +425,7 @@ static ulong flash_get_size (struct flash_info *info, ulong base)
sector = base;
for (i = 0; i < num_erase_regions; i++) {
+ unsigned int __region = i;
struct mtd_erase_region_info *region = &info->eraseregions[i];
if (i > NUM_ERASE_REGIONS) {
@@ -453,17 +434,15 @@ static ulong flash_get_size (struct flash_info *info, ulong base)
break;
}
if (geometry_reversed)
- tmp = flash_read_long (info, 0,
- FLASH_OFFSET_ERASE_REGIONS +
- (num_erase_regions - 1 - i) * 4);
- else
- tmp = flash_read_long (info, 0,
- FLASH_OFFSET_ERASE_REGIONS +
- i * 4);
+ __region = num_erase_regions - 1 - i;
+
+ tmp = le32_to_cpu(qry.erase_region_info[__region]);
+ debug("erase region %u: 0x%08lx\n", __region, tmp);
+
+ erase_region_count = (tmp & 0xffff) + 1;
+ tmp >>= 16;
erase_region_size =
(tmp & 0xffff) ? ((tmp & 0xffff) * 256) : 128;
- tmp >>= 16;
- erase_region_count = (tmp & 0xffff) + 1;
debug ("erase_region_count = %d erase_region_size = %d\n",
erase_region_count, erase_region_size);
@@ -501,15 +480,15 @@ static ulong flash_get_size (struct flash_info *info, ulong base)
info->sector_count = sect_cnt;
/* multiply the size by the number of chips */
- info->size = (1 << flash_read_uchar (info, FLASH_OFFSET_SIZE)) * size_ratio;
- info->buffer_size = (1 << flash_read_ushort (info, 0, FLASH_OFFSET_BUFFER_SIZE));
- tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_ETOUT);
- info->erase_blk_tout = (tmp * (1 << flash_read_uchar (info, FLASH_OFFSET_EMAX_TOUT)));
- tmp = (1 << flash_read_uchar (info, FLASH_OFFSET_WBTOUT)) *
- (1 << flash_read_uchar (info, FLASH_OFFSET_WBMAX_TOUT));
+ info->size = (1 << qry.dev_size) * size_ratio;
+ info->buffer_size = (1 << le16_to_cpu(qry.max_buf_write_size));
+ tmp = 1 << qry.block_erase_timeout_typ;
+ info->erase_blk_tout = (tmp * (1 << qry.block_erase_timeout_max));
+ tmp = (1 << qry.buf_write_timeout_typ) *
+ (1 << qry.buf_write_timeout_max);
info->buffer_write_tout = tmp * 1000;
- tmp = (1 << flash_read_uchar (info, FLASH_OFFSET_WTOUT)) *
- (1 << flash_read_uchar (info, FLASH_OFFSET_WMAX_TOUT));
+ tmp = (1 << qry.word_write_timeout_typ) *
+ (1 << qry.word_write_timeout_max);
info->write_tout = tmp * 1000;
info->flash_id = FLASH_MAN_CFI;
if ((info->interface == FLASH_CFI_X8X16) && (info->chipwidth == FLASH_CFI_BY8)) {
diff --git a/drivers/nor/cfi_flash.h b/drivers/nor/cfi_flash.h
index 026654c..4b3bd25 100644
--- a/drivers/nor/cfi_flash.h
+++ b/drivers/nor/cfi_flash.h
@@ -73,6 +73,39 @@ struct flash_info {
#define NUM_ERASE_REGIONS 4 /* max. number of erase regions */
+/* CFI standard query structure */
+struct cfi_qry {
+ u8 qry[3];
+ u16 p_id;
+ u16 p_adr;
+ u16 a_id;
+ u16 a_adr;
+ u8 vcc_min;
+ u8 vcc_max;
+ u8 vpp_min;
+ u8 vpp_max;
+ u8 word_write_timeout_typ;
+ u8 buf_write_timeout_typ;
+ u8 block_erase_timeout_typ;
+ u8 chip_erase_timeout_typ;
+ u8 word_write_timeout_max;
+ u8 buf_write_timeout_max;
+ u8 block_erase_timeout_max;
+ u8 chip_erase_timeout_max;
+ u8 dev_size;
+ u16 interface_desc;
+ u16 max_buf_write_size;
+ u8 num_erase_regions;
+ u32 erase_region_info[NUM_ERASE_REGIONS];
+} __attribute__((packed));
+
+struct cfi_pri_hdr {
+ u8 pri[3];
+ u8 major_version;
+ u8 minor_version;
+} __attribute__((packed));
+
+
struct cfi_cmd_set {
int (*flash_write_cfibuffer) (struct flash_info *info, ulong dest, const uchar * cp, int len);
int (*flash_erase_one) (struct flash_info *info, long sect);
diff --git a/drivers/nor/cfi_flash_amd.c b/drivers/nor/cfi_flash_amd.c
index e9319b6..738389c 100644
--- a/drivers/nor/cfi_flash_amd.c
+++ b/drivers/nor/cfi_flash_amd.c
@@ -72,7 +72,8 @@ static int flash_toggle (struct flash_info *info, flash_sect_t sect, uint offset
} else if (bankwidth_is_4(info)) {
retval = flash_read32(addr) != flash_read32(addr);
} else if (bankwidth_is_8(info)) {
- retval = flash_read64(addr) != flash_read64(addr);
+ retval = ( (flash_read32( addr ) != flash_read32( addr )) ||
+ (flash_read32(addr+4) != flash_read32(addr+4)) );
} else
retval = 0;
--
1.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2010-11-26 19:56 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-26 19:43 [PATCH 0/12] cfi_flash: improvment Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` [PATCH 01/12] cfi_flash: move intel real protect flash support to cfi_flash_intel.c Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` [PATCH 02/12] cfi_flash: add Atmel real protect flash support Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` [PATCH 03/12] cfi_flash: move flash_read_uchar from inline to noinline Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` [PATCH 04/12] cfi_flash: use amd and standard reset flash command at probing Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` [PATCH 05/12] cfi_flash: synchronize command offsets with Linux CFI driver Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` [PATCH 06/12] cfi_flash: update manufacturer id flash support Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` [PATCH 07/12] cfi_flash: Introduce read and write accessors Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2010-11-26 19:52 ` [PATCH 09/12] cfi_flash: do not reset flash when probe fails Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` [PATCH 10/12] cfi_flash: move reset command assigment to specific chipset init function Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` [PATCH 11/12] cfi_flash: introduce flash cmdset fixup Jean-Christophe PLAGNIOL-VILLARD
2010-11-26 19:52 ` [PATCH 12/12] cfi_flash_amd: Add manufacturer-specific fixups Jean-Christophe PLAGNIOL-VILLARD
2010-11-29 20:53 ` [PATCH 0/12] cfi_flash: improvment Sascha Hauer
2010-11-30 13:44 ` Jean-Christophe PLAGNIOL-VILLARD
2010-12-02 17:52 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1290801161-2417-8-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
--cc=hskinnemoen@atmel.com \
--cc=nicolas.ferre@atmel.com \
--cc=patrice.vilchez@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox