From: Juergen Beisert <jbe@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Juergen Beisert <juergen@kreuzholzen.de>
Subject: [PATCH 12/15] mini2440: Add MCI support
Date: Sun, 13 Feb 2011 15:10:49 +0100 [thread overview]
Message-ID: <1297606252-802-13-git-send-email-jbe@pengutronix.de> (raw)
In-Reply-To: <1297606252-802-1-git-send-email-jbe@pengutronix.de>
From: Juergen Beisert <juergen@kreuzholzen.de>
---
arch/arm/boards/mini2440/mini2440.c | 16 ++++++++++++++++
1 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boards/mini2440/mini2440.c b/arch/arm/boards/mini2440/mini2440.c
index 30dff07..b30a9e2 100644
--- a/arch/arm/boards/mini2440/mini2440.c
+++ b/arch/arm/boards/mini2440/mini2440.c
@@ -33,12 +33,14 @@
#include <partition.h>
#include <dm9000.h>
#include <nand.h>
+#include <mci.h>
#include <asm/armlinux.h>
#include <asm/io.h>
#include <mach/gpio.h>
#include <mach/s3c24x0-iomap.h>
#include <mach/s3c24x0-nand.h>
#include <mach/s3c24xx-generic.h>
+#include <mach/mci.h>
static struct memory_platform_data ram_pdata = {
.name = "ram0",
@@ -83,6 +85,19 @@ static struct device_d dm9000_dev = {
.platform_data = &dm9000_data,
};
+static struct s3c_mci_platform_data mci_data = {
+ .caps = MMC_MODE_4BIT | MMC_MODE_HS | MMC_MODE_HS_52MHz,
+ .voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_detect = 232, /* GPG8_GPIO */
+ .detect_invert = 0,
+};
+
+static struct device_d mci_dev = {
+ .name = "s3c_mci",
+ .map_base = S3C2410_SDI_BASE,
+ .platform_data = &mci_data,
+};
+
static const unsigned pin_usage[] = {
/* address bus, used by NOR, SDRAM */
GPA1_ADDR16,
@@ -252,6 +267,7 @@ static int mini2440_devices_init(void)
devfs_add_partition("nand0", 0x40000, 0x20000, PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", NULL);
#endif
+ register_device(&mci_dev);
armlinux_add_dram(&sdram_dev);
armlinux_set_bootparams((void *)sdram_dev.map_base + 0x100);
armlinux_set_architecture(MACH_TYPE_MINI2440);
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2011-02-13 14:11 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-13 14:10 RFC: Booting from NAND for mini2440 platform Juergen Beisert
2011-02-13 14:10 ` [PATCH 01/15] S3C24xx: Just remove a trailing whitespace Juergen Beisert
2011-02-13 14:10 ` [PATCH 02/15] MACH-S3C24xx: Fix typo in UART2_SIZE macro Juergen Beisert
2011-02-13 14:10 ` [PATCH 03/15] MACH-S324xx: Change detection method of the second SDRAM bank Juergen Beisert
2011-02-13 14:10 ` [PATCH 04/15] mini2440: Be a little be pedantic with the include file order Juergen Beisert
2011-02-13 14:10 ` [PATCH 05/15] mini2440: Fix a runtime warning when '.id=0' is used Juergen Beisert
2011-02-13 14:10 ` [PATCH 06/15] mini2440: Add some useful documentation Juergen Beisert
2011-02-13 14:10 ` [PATCH 07/15] mini2440: Add PLL settings Juergen Beisert
2011-02-13 14:10 ` [PATCH 08/15] mini2440: Add SDRAM config settings Juergen Beisert
2011-02-13 14:10 ` [PATCH 09/15] mini2440: Configure debug UART pins very early Juergen Beisert
2011-02-13 14:10 ` [PATCH 10/15] mini2440: Add SDRAM size autodetection Juergen Beisert
2011-02-13 14:10 ` [PATCH 11/15] mini2440: Add GPIO settings Juergen Beisert
2011-02-13 14:10 ` Juergen Beisert [this message]
2011-02-13 14:10 ` [PATCH 13/15] mini2440: Add booting from NAND support Juergen Beisert
2011-02-13 14:10 ` [PATCH 14/15] mini2440: Remove some A9M2440 platform leftovers Juergen Beisert
2011-02-14 9:35 ` Juergen Beisert
2011-02-13 14:10 ` [PATCH 15/15] mini2440: Use generic environment Juergen Beisert
2011-02-13 19:01 ` mini2440: Forgotten patches to make it work (1 of 2) Juergen Beisert
2011-02-13 19:49 ` mini2440: Forgotten patches to make it work (2 " Juergen Beisert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1297606252-802-13-git-send-email-jbe@pengutronix.de \
--to=jbe@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=juergen@kreuzholzen.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox