From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-wy0-f177.google.com ([74.125.82.177]) by canuck.infradead.org with esmtps (Exim 4.72 #1 (Red Hat Linux)) id 1Q6V6C-0006jl-VE for barebox@lists.infradead.org; Sun, 03 Apr 2011 21:44:50 +0000 Received: by wyb28 with SMTP id 28so5134017wyb.36 for ; Sun, 03 Apr 2011 14:44:43 -0700 (PDT) From: franck.jullien@gmail.com Date: Sun, 3 Apr 2011 23:45:00 +0200 Message-Id: <1301867100-13020-1-git-send-email-franck.jullien@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH] Nios2: Add Altera TSE MAC driver To: barebox@lists.infradead.org From: Franck JULLIEN This patch adds the Altera Triple Speed Ethernet driver. Signed-off-by: Franck JULLIEN --- drivers/net/Kconfig | 16 + drivers/net/Makefile | 5 +- drivers/net/altera_tse.c | 720 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/altera_tse.h | 522 +++++++++++++++++++++++++++++++++ 4 files changed, 1261 insertions(+), 2 deletions(-) create mode 100644 drivers/net/altera_tse.c create mode 100644 drivers/net/altera_tse.h diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 6479417..19e35db 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -84,6 +84,22 @@ config DRIVER_NET_TAP bool "tap Ethernet driver" depends on LINUX +config DRIVER_NET_TSE + depends on NIOS2 + bool "Altera TSE ethernet driver" + select MIIDEV + help + This option enables support for the Altera TSE MAC. + +config TSE_USE_DEDICATED_DESC_MEM + depends on DRIVER_NET_TSE + bool "Altera TSE uses dedicated descriptor memory" + help + This option tells the TSE driver to use an onchip memory + to store SGDMA descriptors. Descriptor memory is not + reserved with a malloc but directly mapped to the memory + address (defined in config.h) + source "drivers/net/usb/Kconfig" endmenu diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 96d3d32..f02618b 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -1,7 +1,7 @@ -obj-$(CONFIG_DRIVER_NET_CS8900) += cs8900.o +obj-$(CONFIG_DRIVER_NET_CS8900) += cs8900.o obj-$(CONFIG_DRIVER_NET_SMC911X) += smc911x.o obj-$(CONFIG_DRIVER_NET_SMC91111) += smc91111.o -obj-$(CONFIG_DRIVER_NET_DM9000) += dm9000.o +obj-$(CONFIG_DRIVER_NET_DM9000) += dm9000.o obj-$(CONFIG_DRIVER_NET_NETX) += netx_eth.o obj-$(CONFIG_DRIVER_NET_AT91_ETHER) += at91_ether.o obj-$(CONFIG_DRIVER_NET_MPC5200) += fec_mpc5200.o @@ -11,3 +11,4 @@ obj-$(CONFIG_DRIVER_NET_MACB) += macb.o obj-$(CONFIG_DRIVER_NET_TAP) += tap.o obj-$(CONFIG_MIIDEV) += miidev.o obj-$(CONFIG_NET_USB) += usb/ +obj-$(CONFIG_DRIVER_NET_TSE) += altera_tse.o diff --git a/drivers/net/altera_tse.c b/drivers/net/altera_tse.c new file mode 100644 index 0000000..464a6d4 --- /dev/null +++ b/drivers/net/altera_tse.c @@ -0,0 +1,720 @@ +/* + * Altera TSE Network driver + * + * Copyright (C) 2008 Altera Corporation. + * Copyright (C) 2010 Thomas Chou + * Copyright (C) 2011 Franck JULLIEN, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include "altera_tse.h" + +static struct phy_info phy_info_dp83848 = { + 0x20005C90, + "DP83848C", + 32, + (struct phy_cmd[]){ /* config */ + {PHY_BMCR, PHY_BMCR_RESET, NULL}, + {PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG, NULL}, + {miim_end,} + }, + (struct phy_cmd[]){ /* startup */ + {miim_end,} + }, + (struct phy_cmd[]){ /* shutdown */ + {miim_end,} + } +}; + +/* a generic flavor. */ +static struct phy_info phy_info_generic = { + 0, + "Unknown/Generic PHY", + 32, + (struct phy_cmd[]){ /* config */ + {PHY_BMCR, PHY_BMCR_RESET, NULL}, + {PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG, NULL}, + {miim_end,} + }, + (struct phy_cmd[]){ /* startup */ + {PHY_BMSR, miim_read, NULL}, + {PHY_BMSR, miim_read, NULL}, + {miim_end,} + }, + (struct phy_cmd[]){ /* shutdown */ + {miim_end,} + } +}; + +static struct phy_info *phy_info[] = { + &phy_info_dp83848, + NULL +}; + +/* This is a generic routine that the SGDMA mode-specific routines + * call to populate a descriptor. + * arg1 :pointer to first SGDMA descriptor. + * arg2 :pointer to next SGDMA descriptor. + * arg3 :Address to where data to be written. + * arg4 :Address from where data to be read. + * arg5 :no of byte to transaction. + * arg6 :variable indicating to generate start of packet or not + * arg7 :read fixed + * arg8 :write fixed + * arg9 :read burst + * arg10 :write burst + * arg11 :atlantic_channel number + */ +static void alt_sgdma_construct_descriptor_burst( + struct alt_sgdma_descriptor *desc, + struct alt_sgdma_descriptor *next, + uint32_t *read_addr, + uint32_t *write_addr, + uint16_t length_or_eop, + uint8_t generate_eop, + uint8_t read_fixed, + uint8_t write_fixed_or_sop, + uint8_t read_burst, + uint8_t write_burst, + uint8_t atlantic_channel) +{ + uint32_t temp; + + /* + * Mark the "next" descriptor as "not" owned by hardware. This prevents + * The SGDMA controller from continuing to process the chain. This is + * done as a single IO write to bypass cache, without flushing + * the entire descriptor, since only the 8-bit descriptor status must + * be flushed. + */ + if (!next) + printf("Next descriptor not defined!!\n"); + + temp = readb(&next->descriptor_control); + writeb(temp & ~ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK, + &next->descriptor_control); + + writel((uint32_t)read_addr, &desc->source); + writel((uint32_t)write_addr, &desc->destination); + writel((uint32_t)next, &desc->next); + + writel(0, &desc->source_pad); + writel(0, &desc->destination_pad); + writel(0, &desc->next_pad); + writew(length_or_eop, &desc->bytes_to_transfer); + writew(0, &desc->actual_bytes_transferred); + writeb(0, &desc->descriptor_status); + + /* SGDMA burst not currently supported */ + writeb(0, &desc->read_burst); + writeb(0, &desc->write_burst); + + /* + * Set the descriptor control block as follows: + * - Set "owned by hardware" bit + * - Optionally set "generate EOP" bit + * - Optionally set the "read from fixed address" bit + * - Optionally set the "write to fixed address bit (which serves + * serves as a "generate SOP" control bit in memory-to-stream mode). + * - Set the 4-bit atlantic channel, if specified + * + * Note this step is performed after all other descriptor information + * has been filled out so that, if the controller already happens to be + * pointing at this descriptor, it will not run (via the "owned by + * hardware" bit) until all other descriptor has been set up. + */ + + writeb((ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK) | + (generate_eop ? ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK : 0) | + (read_fixed ? ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK : 0) | + (write_fixed_or_sop ? ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK : 0) | + (atlantic_channel ? ((atlantic_channel & 0x0F) << 3) : 0), + &desc->descriptor_control); +} + +static int alt_sgdma_do_sync_transfer(struct alt_sgdma_registers *dev, + struct alt_sgdma_descriptor *desc) +{ + uint32_t temp; + uint64_t start; + uint64_t tout; + + /* Wait for any pending transfers to complete */ + tout = ALT_TSE_SGDMA_BUSY_WATCHDOG_TOUT * MSECOND; + + start = get_time_ns(); + + while (readl(&dev->status) & ALT_SGDMA_STATUS_BUSY_MSK) { + if (is_timeout(start, tout)) { + debug("Timeout waiting sgdma in do sync!\n"); + break; + } + } + + /* + * Clear any (previous) status register information + * that might occlude our error checking later. + */ + writel(0xFF, &dev->status); + + /* Point the controller at the descriptor */ + writel((uint32_t)desc, &dev->next_descriptor_pointer); + debug("next desc in sgdma 0x%x\n", (uint32_t)dev->next_descriptor_pointer); + + /* + * Set up SGDMA controller to: + * - Disable interrupt generation + * - Run once a valid descriptor is written to controller + * - Stop on an error with any particular descriptor + */ + writel(ALT_SGDMA_CONTROL_RUN_MSK | ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK, + &dev->control); + + /* Wait for the descriptor (chain) to complete */ + debug("wait for sgdma...."); + start = get_time_ns(); + + while (readl(&dev->status) & ALT_SGDMA_STATUS_BUSY_MSK) { + if (is_timeout(start, tout)) { + debug("Timeout waiting sgdma in do sync!\n"); + break; + } + } + + debug("done\n"); + + /* Clear Run */ + temp = readl(&dev->control); + writel(temp & ~ALT_SGDMA_CONTROL_RUN_MSK, &dev->control); + + /* Get & clear status register contents */ + debug("tx sgdma status = 0x%x", readl(&dev->status)); + writel(0xFF, &dev->status); + + return 0; +} + +static int alt_sgdma_do_async_transfer(struct alt_sgdma_registers *dev, + struct alt_sgdma_descriptor *desc) +{ + uint64_t start; + uint64_t tout; + + /* Wait for any pending transfers to complete */ + tout = ALT_TSE_SGDMA_BUSY_WATCHDOG_TOUT * MSECOND; + + start = get_time_ns(); + + while (readl(&dev->status) & ALT_SGDMA_STATUS_BUSY_MSK) { + if (is_timeout(start, tout)) { + debug("Timeout waiting sgdma in do async!\n"); + break; + } + } + + /* + * Clear any (previous) status register information + * that might occlude our error checking later. + */ + writel(0xFF, &dev->status); + + /* Point the controller at the descriptor */ + writel((uint32_t)desc, &dev->next_descriptor_pointer); + + /* + * Set up SGDMA controller to: + * - Disable interrupt generation + * - Run once a valid descriptor is written to controller + * - Stop on an error with any particular descriptor + */ + writel(ALT_SGDMA_CONTROL_RUN_MSK | ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK, + &dev->control); + + return 0; +} + +static int tse_get_ethaddr(struct eth_device *edev, unsigned char *m) +{ +/* If there is already a MAC address configured when barebox starts (??), use it */ +#ifdef THERE_IS_A_DEFAULT_MAC_ADDR_IN_TSE + struct altera_tse_priv *priv = edev->priv; + struct alt_tse_mac *mac_dev = priv->mac_dev; + + m[5] = (readl(&mac_dev->mac_addr_1) >> 8) && 0xFF; + m[4] = (readl(&mac_dev->mac_addr_1)) && 0xFF; + m[3] = (readl(mac_dev->mac_addr_0) >> 24) && 0xFF; + m[2] = (readl(mac_dev->mac_addr_0) >> 16) && 0xFF; + m[1] = (readl(mac_dev->mac_addr_0) >> 8) && 0xFF; + m[0] = (readl(mac_dev->mac_addr_0)) && 0xFF; + + return 0; +#else + return -1; +#endif +} + +static int tse_set_ethaddr(struct eth_device *edev, unsigned char *m) +{ + struct altera_tse_priv *priv = edev->priv; + struct alt_tse_mac *mac_dev = priv->mac_dev; + + debug("Setting MAC address to %02x:%02x:%02x:%02x:%02x:%02x\n", + m[0], m[1], m[2], m[3], m[4], m[5]); + + writel(m[3] << 24 | m[2] << 16 | m[1] << 8 | m[0], &mac_dev->mac_addr_0); + writel((m[5] << 8 | m[4]) & 0xFFFF, &mac_dev->mac_addr_1); + + return 0; +} + +static int tse_phy_read(struct mii_device *mdev, int phy_addr, int reg) +{ + struct eth_device *edev = mdev->edev; + struct alt_tse_mac *mac_dev; + uint32_t *mdio_regs; + + mac_dev = (struct alt_tse_mac *)edev->iobase; + writel(phy_addr, &mac_dev->mdio_phy1_addr); + + mdio_regs = (uint32_t *)&mac_dev->mdio_phy1; + + return readl(&mdio_regs[reg]) & 0xFFFF; +} + +static int tse_phy_write(struct mii_device *mdev, int phy_addr, int reg, int val) +{ + struct eth_device *edev = mdev->edev; + struct alt_tse_mac *mac_dev; + uint32_t *mdio_regs; + + mac_dev = (struct alt_tse_mac *)edev->iobase; + writel(phy_addr, &mac_dev->mdio_phy1_addr); + + mdio_regs = (uint32_t *)&mac_dev->mdio_phy1; + + writel((uint32_t)val, &mdio_regs[reg]); + + return 0; +} + +static void tse_reset(struct eth_device *edev) +{ + /* stop sgdmas, disable tse receive */ + struct altera_tse_priv *priv = edev->priv; + struct alt_tse_mac *mac_dev = priv->mac_dev; + struct alt_sgdma_registers *rx_sgdma = priv->sgdma_rx; + struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx; + struct alt_sgdma_descriptor *rx_desc = (struct alt_sgdma_descriptor *)&priv->rx_desc[0]; + struct alt_sgdma_descriptor *tx_desc = (struct alt_sgdma_descriptor *)&priv->tx_desc[0]; + uint64_t start; + uint64_t tout; + + tout = ALT_TSE_SGDMA_BUSY_WATCHDOG_TOUT * MSECOND; + + /* clear rx desc & wait for sgdma to complete */ + writeb(0, &rx_desc->descriptor_control); + writel(0, &rx_sgdma->control); + + writel(ALT_SGDMA_CONTROL_SOFTWARERESET_MSK, &rx_sgdma->control); + writel(ALT_SGDMA_CONTROL_SOFTWARERESET_MSK, &rx_sgdma->control); + mdelay(100); + + start = get_time_ns(); + + while (readl(&rx_sgdma->status) & ALT_SGDMA_STATUS_BUSY_MSK) { + if (is_timeout(start, tout)) { + printf("Timeout waiting for rx sgdma!\n"); + writel(ALT_SGDMA_CONTROL_SOFTWARERESET_MSK, &rx_sgdma->control); + writel(ALT_SGDMA_CONTROL_SOFTWARERESET_MSK, &rx_sgdma->control); + break; + } + } + + /* clear tx desc & wait for sgdma to complete */ + writeb(0, &tx_desc->descriptor_control); + writel(0, &tx_sgdma->control); + + writel(ALT_SGDMA_CONTROL_SOFTWARERESET_MSK, &tx_sgdma->control); + writel(ALT_SGDMA_CONTROL_SOFTWARERESET_MSK, &tx_sgdma->control); + mdelay(100); + + start = get_time_ns(); + + while (readl(&tx_sgdma->status) & ALT_SGDMA_STATUS_BUSY_MSK) { + if (is_timeout(start, tout)) { + printf("Timeout waiting for tx sgdma!\n"); + writel(ALT_SGDMA_CONTROL_SOFTWARERESET_MSK, &tx_sgdma->control); + writel(ALT_SGDMA_CONTROL_SOFTWARERESET_MSK, &tx_sgdma->control); + break; + } + } + + /* reset the mac */ + writel(ALTERA_TSE_CMD_TX_ENA_MSK | ALTERA_TSE_CMD_RX_ENA_MSK | + ALTERA_TSE_CMD_SW_RESET_MSK, &mac_dev->command_config); + + start = get_time_ns(); + tout = ALT_TSE_SW_RESET_WATCHDOG_TOUT * MSECOND; + + while (readl(&mac_dev->command_config) & ALTERA_TSE_CMD_SW_RESET_MSK) { + if (is_timeout(start, tout)) { + printf("TSEMAC SW reset bit never cleared!\n"); + break; + } + } +} + +static int tse_eth_open(struct eth_device *edev) +{ + return 0; +} + +static int tse_eth_send(struct eth_device *edev, void *packet, int length) +{ + + struct altera_tse_priv *priv = edev->priv; + struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx; + struct alt_sgdma_descriptor *tx_desc = (struct alt_sgdma_descriptor *)priv->tx_desc; + + struct alt_sgdma_descriptor *tx_desc_cur = (struct alt_sgdma_descriptor *)&tx_desc[0]; + + flush_dcache_range((uint32_t)packet, (uint32_t)packet + length); + alt_sgdma_construct_descriptor_burst( + (struct alt_sgdma_descriptor *)&tx_desc[0], + (struct alt_sgdma_descriptor *)&tx_desc[1], + (uint32_t *)packet, /* read addr */ + (uint32_t *)0, /* */ + length, /* length or EOP ,will change for each tx */ + 0x1, /* gen eop */ + 0x0, /* read fixed */ + 0x1, /* write fixed or sop */ + 0x0, /* read burst */ + 0x0, /* write burst */ + 0x0 /* channel */ + ); + + alt_sgdma_do_sync_transfer(tx_sgdma, tx_desc_cur); + + return 0;; +} + +static void tse_eth_halt(struct eth_device *edev) +{ + +} + +static int tse_eth_rx(struct eth_device *edev) +{ + uint16_t packet_length = 0; + + struct altera_tse_priv *priv = edev->priv; + struct alt_sgdma_descriptor *rx_desc = (struct alt_sgdma_descriptor *)priv->rx_desc; + struct alt_sgdma_descriptor *rx_desc_cur = &rx_desc[0]; + struct alt_sgdma_registers *rx_sgdma = priv->sgdma_rx; + + if (rx_desc_cur->descriptor_status & + ALT_SGDMA_DESCRIPTOR_STATUS_TERMINATED_BY_EOP_MSK) { + + packet_length = rx_desc->actual_bytes_transferred; + net_receive(NetRxPackets[0], packet_length); + + /* Clear Run */ + rx_sgdma->control = (rx_sgdma->control & (~ALT_SGDMA_CONTROL_RUN_MSK)); + + /* start descriptor again */ + flush_dcache_range((uint32_t)(NetRxPackets[0]), (uint32_t)(NetRxPackets[0]) + PKTSIZE); + alt_sgdma_construct_descriptor_burst( + (struct alt_sgdma_descriptor *)&rx_desc[0], + (struct alt_sgdma_descriptor *)&rx_desc[1], + (uint32_t)0x0, /* read addr */ + (uint32_t *)NetRxPackets[0], /* */ + 0x0, /* length or EOP */ + 0x0, /* gen eop */ + 0x0, /* read fixed */ + 0x0, /* write fixed or sop */ + 0x0, /* read burst */ + 0x0, /* write burst */ + 0x0 /* channel */ + ); + + /* setup the sgdma */ + alt_sgdma_do_async_transfer(priv->sgdma_rx, &rx_desc[0]); + } + + return 0; +} + +/* Grab the identifier of the device's PHY, and search through +* all of the known PHYs to see if one matches. If so, return +* it, if not, return NULL +*/ +static struct phy_info *get_phy_info(struct eth_device *edev) +{ + struct altera_tse_priv *priv = edev->priv; + struct phy_info *theInfo = NULL; + uint32_t phy_reg; + uint32_t phy_ID; + uint8_t i; + uint8_t mii_bus_scan = 0; + uint8_t current_mii_address = 1; + + if ((priv->miidev)->address == -1) + mii_bus_scan = 1; + else + current_mii_address = (priv->miidev)->address; + + do { + /* Grab the bits from PHYIR1, and put them in the upper half */ + phy_reg = tse_phy_read(priv->miidev, current_mii_address, MIIM_PHYIR1); + phy_ID = (phy_reg & 0xffff) << 16; + + /* Grab the bits from PHYIR2, and put them in the lower half */ + phy_reg = tse_phy_read(priv->miidev, current_mii_address, MIIM_PHYIR2); + phy_ID |= (phy_reg & 0xffff); + + if (phy_ID != 0xffffffff) { + printf("PHY found at address %d\n", current_mii_address); + break; + } + + current_mii_address++; + + } while (current_mii_address < 32 && mii_bus_scan); + + if (phy_ID != 0xffffffff) { + /* loop through all the known PHY types, and find one that */ + /* matches the ID we read from the PHY. */ + for (i = 0; phy_info[i]; i++) { + if (phy_info[i]->id == (phy_ID >> phy_info[i]->shift)) { + theInfo = phy_info[i]; + break; + } + } + + if (theInfo == NULL) { + theInfo = &phy_info_generic; + printf("No support for PHY id %x; assuming generic\n", phy_ID); + } else + printf("PHY is %s (0x%x)\n", theInfo->name, phy_ID); + } else + printf("PHY not found\n"); + + return theInfo; +} + +/* Execute the given series of commands on the given device's + * PHY, running functions as necessary + */ +static void phy_run_commands(struct altera_tse_priv *priv, struct phy_cmd *cmd) +{ + uint8_t i; + uint32_t result; + + for (i = 0; cmd->mii_reg != miim_end; i++) { + if (cmd->mii_data == miim_read) { + result = tse_phy_read(priv->miidev, (priv->miidev)->address, cmd->mii_reg); + if (cmd->funct != NULL) + (*(cmd->funct)) (result, priv); + } else { + if (cmd->funct != NULL) + result = (*(cmd->funct)) (cmd->mii_reg, priv); + else + result = cmd->mii_data; + + tse_phy_write(priv->miidev, (priv->miidev)->address, cmd->mii_reg, result); + } + cmd++; + } +} + +/* Phy init code */ +static int init_phy(struct eth_device *edev) +{ + struct altera_tse_priv *priv = edev->priv; + struct phy_info *curphy; + + /* Get the cmd structure corresponding to the attached + * PHY */ + curphy = get_phy_info(edev); + + if (curphy == NULL) { + priv->phyinfo = NULL; + return 0; + } else + debug("%s found\n", curphy->name); + + priv->phyinfo = curphy; + + phy_run_commands(priv, priv->phyinfo->config); + + return 1; +} + +static int tse_init_dev(struct eth_device *edev) +{ + struct altera_tse_priv *priv = edev->priv; + struct alt_tse_mac *mac_dev = priv->mac_dev; + struct alt_sgdma_descriptor *tx_desc = priv->tx_desc; + struct alt_sgdma_descriptor *rx_desc = priv->rx_desc; + struct alt_sgdma_descriptor *rx_desc_cur; + + rx_desc_cur = (struct alt_sgdma_descriptor *)&rx_desc[0]; + + tse_reset(edev); + init_phy(edev); + + /* need to create sgdma */ + alt_sgdma_construct_descriptor_burst( + (struct alt_sgdma_descriptor *)&tx_desc[0], + (struct alt_sgdma_descriptor *)&tx_desc[1], + (uint32_t *)NULL, /* read addr */ + (uint32_t *)0, /* */ + 0, /* length or EOP ,will change for each tx */ + 0x1, /* gen eop */ + 0x0, /* read fixed */ + 0x1, /* write fixed or sop */ + 0x0, /* read burst */ + 0x0, /* write burst */ + 0x0 /* channel */ + ); + + flush_dcache_range((uint32_t)(NetRxPackets[0]), (uint32_t)(NetRxPackets[0]) + PKTSIZE); + alt_sgdma_construct_descriptor_burst( + (struct alt_sgdma_descriptor *)&rx_desc[0], + (struct alt_sgdma_descriptor *)&rx_desc[1], + (uint32_t)0x0, /* read addr */ + (uint32_t *)NetRxPackets[0], /* */ + 0x0, /* length or EOP */ + 0x0, /* gen eop */ + 0x0, /* read fixed */ + 0x0, /* write fixed or sop */ + 0x0, /* read burst */ + 0x0, /* write burst */ + 0x0 /* channel */ + ); + + /* start rx async transfer */ + alt_sgdma_do_async_transfer(priv->sgdma_rx, rx_desc_cur); + + /* Initialize MAC registers */ + writel(PKTSIZE, &mac_dev->max_frame_length); + + /* NO Shift */ + writel(0, &mac_dev->rx_cmd_stat); + writel(0, &mac_dev->tx_cmd_stat); + + /* enable MAC */ + writel(ALTERA_TSE_CMD_TX_ENA_MSK | ALTERA_TSE_CMD_RX_ENA_MSK, &mac_dev->command_config); + + if (priv->phyinfo != NULL) + phy_run_commands(priv, priv->phyinfo->startup); + + return 0; +} + +static int tse_probe(struct device_d *dev) +{ + struct altera_tse_priv *priv; + struct mii_device *miidev; + struct eth_device *edev; + struct alt_sgdma_descriptor *rx_desc; + struct alt_sgdma_descriptor *tx_desc; +#ifndef CONFIG_TSE_USE_DEDICATED_DESC_MEM + uint32_t dma_handle; +#endif + + edev = xzalloc(sizeof(struct eth_device) + sizeof(struct altera_tse_priv)); + miidev = xzalloc(sizeof(struct mii_device)); + + dev->type_data = edev; + edev->priv = (struct altera_tse_priv *)(edev + 1); + + edev->iobase = dev->map_base; + + priv = edev->priv; + + edev->init = tse_init_dev; + edev->open = tse_eth_open; + edev->send = tse_eth_send; + edev->recv = tse_eth_rx; + edev->halt = tse_eth_halt; + edev->get_ethaddr = tse_get_ethaddr; + edev->set_ethaddr = tse_set_ethaddr; + +#ifdef CONFIG_TSE_USE_DEDICATED_DESC_MEM + tx_desc = (struct alt_sgdma_descriptor *)NIOS_SOPC_TSE_DESC_MEM_BASE; + rx_desc = tx_desc + 2; +#else + tx_desc = dma_alloc_coherent(sizeof(*tx_desc) * (3 + PKTBUFSRX), &dma_handle); + rx_desc = tx_desc + 2; + + if (!tx_desc) { + free(edev); + free(miidev); + return 0; + } +#endif + + memset(rx_desc, 0, (sizeof *rx_desc) * (PKTBUFSRX + 1)); + memset(tx_desc, 0, (sizeof *tx_desc) * 2); + + priv->mac_dev = (struct alt_tse_mac *)dev->map_base; + priv->sgdma_rx = (struct alt_sgdma_registers *)NIOS_SOPC_SGDMA_RX_BASE; + priv->sgdma_tx = (struct alt_sgdma_registers *)NIOS_SOPC_SGDMA_TX_BASE; + priv->rx_desc = rx_desc; + priv->tx_desc = tx_desc; + + priv->miidev = miidev; + + miidev->read = tse_phy_read; + miidev->write = tse_phy_write; +#ifndef NIOS_SOPC_PHY_ADDR + miidev->address = -1; +#else + miidev->address = NIOS_SOPC_PHY_ADDR; +#endif + miidev->flags = 0; + miidev->edev = edev; + + mii_register(miidev); + + return eth_register(edev); +} + +static struct driver_d altera_tse_driver = { + .name = "altera_tse", + .probe = tse_probe, +}; + +static int tse_init(void) +{ + register_driver(&altera_tse_driver); + return 0; +} + +device_initcall(tse_init); + diff --git a/drivers/net/altera_tse.h b/drivers/net/altera_tse.h new file mode 100644 index 0000000..af2694b --- /dev/null +++ b/drivers/net/altera_tse.h @@ -0,0 +1,522 @@ +/* + * Altera 10/100/1000 triple speed ethernet mac + * + * Copyright (C) 2008 Altera Corporation. + * Copyright (C) 2010 Thomas Chou + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ALTERA_TSE_H_ +#define _ALTERA_TSE_H_ + +#define __packed_1_ __attribute__ ((packed, aligned(1))) + +/* PHY Stuff */ +#define miim_end -2 +#define miim_read -1 + +#define MIIMCFG_INIT_VALUE 0x00000003 +#define MIIMCFG_RESET 0x80000000 + +#define MIIMIND_BUSY 0x00000001 +#define MIIMIND_NOTVALID 0x00000004 + +#define MIIM_CONTROL 0x00 +#define MIIM_CONTROL_RESET 0x00009140 +#define MIIM_CONTROL_INIT 0x00001140 +#define MIIM_CONTROL_RESTART 0x00001340 +#define MIIM_ANEN 0x00001000 + +#define MIIM_CR 0x00 +#define MIIM_CR_RST 0x00008000 +#define MIIM_CR_INIT 0x00001000 + +#define MIIM_STATUS 0x1 +#define MIIM_STATUS_AN_DONE 0x00000020 +#define MIIM_STATUS_LINK 0x0004 +#define PHY_BMSR_AUTN_ABLE 0x0008 +#define PHY_BMSR_AUTN_COMP 0x0020 + +#define MIIM_PHYIR1 0x2 +#define MIIM_PHYIR2 0x3 + +#define MIIM_ANAR 0x4 +#define MIIM_ANAR_INIT 0x1e1 + +#define MIIM_TBI_ANLPBPA 0x5 +#define MIIM_TBI_ANLPBPA_HALF 0x00000040 +#define MIIM_TBI_ANLPBPA_FULL 0x00000020 + +#define MIIM_TBI_ANEX 0x6 +#define MIIM_TBI_ANEX_NP 0x00000004 +#define MIIM_TBI_ANEX_PRX 0x00000002 + +#define MIIM_GBIT_CONTROL 0x9 +#define MIIM_GBIT_CONTROL_INIT 0xe00 + +#define MIIM_EXT_PAGE_ACCESS 0x1f + +/* MII PHY REGISTERS */ + +/* phy seed setup */ +#define AUTO 99 +#define _1000BASET 1000 +#define _100BASET 100 +#define _10BASET 10 +#define HALF 22 +#define FULL 44 + +/* phy register offsets */ +#define PHY_BMCR 0x00 +#define PHY_BMSR 0x01 +#define PHY_PHYIDR1 0x02 +#define PHY_PHYIDR2 0x03 +#define PHY_ANAR 0x04 +#define PHY_ANLPAR 0x05 +#define PHY_ANER 0x06 +#define PHY_ANNPTR 0x07 +#define PHY_ANLPNP 0x08 +#define PHY_1000BTCR 0x09 +#define PHY_1000BTSR 0x0A +#define PHY_EXSR 0x0F +#define PHY_PHYSTS 0x10 +#define PHY_MIPSCR 0x11 +#define PHY_MIPGSR 0x12 +#define PHY_DCR 0x13 +#define PHY_FCSCR 0x14 +#define PHY_RECR 0x15 +#define PHY_PCSR 0x16 +#define PHY_LBR 0x17 +#define PHY_10BTSCR 0x18 +#define PHY_PHYCTRL 0x19 + +/* PHY BMCR */ +#define PHY_BMCR_RESET 0x8000 +#define PHY_BMCR_LOOP 0x4000 +#define PHY_BMCR_100MB 0x2000 +#define PHY_BMCR_AUTON 0x1000 +#define PHY_BMCR_POWD 0x0800 +#define PHY_BMCR_ISO 0x0400 +#define PHY_BMCR_RST_NEG 0x0200 +#define PHY_BMCR_DPLX 0x0100 +#define PHY_BMCR_COL_TST 0x0080 + +#define PHY_BMCR_SPEED_MASK 0x2040 +#define PHY_BMCR_1000_MBPS 0x0040 +#define PHY_BMCR_100_MBPS 0x2000 +#define PHY_BMCR_10_MBPS 0x0000 + +/* phy BMSR */ +#define PHY_BMSR_100T4 0x8000 +#define PHY_BMSR_100TXF 0x4000 +#define PHY_BMSR_100TXH 0x2000 +#define PHY_BMSR_10TF 0x1000 +#define PHY_BMSR_10TH 0x0800 +#define PHY_BMSR_EXT_STAT 0x0100 +#define PHY_BMSR_PRE_SUP 0x0040 +#define PHY_BMSR_AUTN_COMP 0x0020 +#define PHY_BMSR_RF 0x0010 +#define PHY_BMSR_AUTN_ABLE 0x0008 +#define PHY_BMSR_LS 0x0004 +#define PHY_BMSR_JD 0x0002 +#define PHY_BMSR_EXT 0x0001 + +/*phy ANLPAR */ +#define PHY_ANLPAR_NP 0x8000 +#define PHY_ANLPAR_ACK 0x4000 +#define PHY_ANLPAR_RF 0x2000 +#define PHY_ANLPAR_ASYMP 0x0800 +#define PHY_ANLPAR_PAUSE 0x0400 +#define PHY_ANLPAR_T4 0x0200 +#define PHY_ANLPAR_TXFD 0x0100 +#define PHY_ANLPAR_TX 0x0080 +#define PHY_ANLPAR_10FD 0x0040 +#define PHY_ANLPAR_10 0x0020 +#define PHY_ANLPAR_100 0x0380 /* we can run at 100 */ +/* phy ANLPAR 1000BASE-X */ +#define PHY_X_ANLPAR_NP 0x8000 +#define PHY_X_ANLPAR_ACK 0x4000 +#define PHY_X_ANLPAR_RF_MASK 0x3000 +#define PHY_X_ANLPAR_PAUSE_MASK 0x0180 +#define PHY_X_ANLPAR_HD 0x0040 +#define PHY_X_ANLPAR_FD 0x0020 + +#define PHY_ANLPAR_PSB_MASK 0x001f +#define PHY_ANLPAR_PSB_802_3 0x0001 +#define PHY_ANLPAR_PSB_802_9 0x0002 + +/* phy 1000BTCR */ +#define PHY_1000BTCR_1000FD 0x0200 +#define PHY_1000BTCR_1000HD 0x0100 + +/* phy 1000BTSR */ +#define PHY_1000BTSR_MSCF 0x8000 +#define PHY_1000BTSR_MSCR 0x4000 +#define PHY_1000BTSR_LRS 0x2000 +#define PHY_1000BTSR_RRS 0x1000 +#define PHY_1000BTSR_1000FD 0x0800 +#define PHY_1000BTSR_1000HD 0x0400 + +/* phy EXSR */ +#define PHY_EXSR_1000XF 0x8000 +#define PHY_EXSR_1000XH 0x4000 +#define PHY_EXSR_1000TF 0x2000 +#define PHY_EXSR_1000TH 0x1000 + +/* PHY_PHYCTRL */ +#define PHY_PHYCTRL_LED_CNFG1 0x0040 +#define PHY_PHYCTRL_LED_CNFG0 0x0020 + +#define MIIM_READ_COMMAND 0x00000001 + +/* struct phy_info: a structure which defines attributes for a PHY + * id will contain a number which represents the PHY. During + * startup, the driver will poll the PHY to find out what its + * UID--as defined by registers 2 and 3--is. The 32-bit result + * gotten from the PHY will be shifted right by "shift" bits to + * discard any bits which may change based on revision numbers + * unimportant to functionality + * + * The struct phy_cmd entries represent pointers to an arrays of + * commands which tell the driver what to do to the PHY. + */ +struct phy_info { + uint id; + char *name; + uint shift; + /* Called to configure the PHY, and modify the controller + * based on the results */ + struct phy_cmd *config; + + /* Called when starting up the controller */ + struct phy_cmd *startup; + + /* Called when bringing down the controller */ + struct phy_cmd *shutdown; +}; + +/* SGDMA Stuff */ +#define ALT_SGDMA_STATUS_ERROR_MSK (0x00000001) +#define ALT_SGDMA_STATUS_EOP_ENCOUNTERED_MSK (0x00000002) +#define ALT_SGDMA_STATUS_DESC_COMPLETED_MSK (0x00000004) +#define ALT_SGDMA_STATUS_CHAIN_COMPLETED_MSK (0x00000008) +#define ALT_SGDMA_STATUS_BUSY_MSK (0x00000010) + +#define ALT_SGDMA_CONTROL_IE_ERROR_MSK (0x00000001) +#define ALT_SGDMA_CONTROL_IE_EOP_ENCOUNTERED_MSK (0x00000002) +#define ALT_SGDMA_CONTROL_IE_DESC_COMPLETED_MSK (0x00000004) +#define ALT_SGDMA_CONTROL_IE_CHAIN_COMPLETED_MSK (0x00000008) +#define ALT_SGDMA_CONTROL_IE_GLOBAL_MSK (0x00000010) +#define ALT_SGDMA_CONTROL_RUN_MSK (0x00000020) +#define ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK (0x00000040) +#define ALT_SGDMA_CONTROL_IE_MAX_DESC_PROCESSED_MSK (0x00000080) +#define ALT_SGDMA_CONTROL_MAX_DESC_PROCESSED_MSK (0x0000FF00) +#define ALT_SGDMA_CONTROL_SOFTWARERESET_MSK (0x00010000) +#define ALT_SGDMA_CONTROL_PARK_MSK (0x00020000) +#define ALT_SGDMA_CONTROL_CLEAR_INTERRUPT_MSK (0x80000000) + +#define ALTERA_TSE_SGDMA_INTR_MASK (ALT_SGDMA_CONTROL_IE_CHAIN_COMPLETED_MSK \ + | ALT_SGDMA_STATUS_DESC_COMPLETED_MSK \ + | ALT_SGDMA_CONTROL_IE_GLOBAL_MSK) + +/* + * Descriptor control bit masks & offsets + * + * Note: The control byte physically occupies bits [31:24] in memory. + * The following bit-offsets are expressed relative to the LSB of + * the control register bitfield. + */ +#define ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK (0x00000001) +#define ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK (0x00000002) +#define ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK (0x00000004) +#define ALT_SGDMA_DESCRIPTOR_CONTROL_ATLANTIC_CHANNEL_MSK (0x00000008) +#define ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK (0x00000080) + +/* + * Descriptor status bit masks & offsets + * + * Note: The status byte physically occupies bits [23:16] in memory. + * The following bit-offsets are expressed relative to the LSB of + * the status register bitfield. + */ +#define ALT_SGDMA_DESCRIPTOR_STATUS_E_CRC_MSK (0x00000001) +#define ALT_SGDMA_DESCRIPTOR_STATUS_E_PARITY_MSK (0x00000002) +#define ALT_SGDMA_DESCRIPTOR_STATUS_E_OVERFLOW_MSK (0x00000004) +#define ALT_SGDMA_DESCRIPTOR_STATUS_E_SYNC_MSK (0x00000008) +#define ALT_SGDMA_DESCRIPTOR_STATUS_E_UEOP_MSK (0x00000010) +#define ALT_SGDMA_DESCRIPTOR_STATUS_E_MEOP_MSK (0x00000020) +#define ALT_SGDMA_DESCRIPTOR_STATUS_E_MSOP_MSK (0x00000040) +#define ALT_SGDMA_DESCRIPTOR_STATUS_TERMINATED_BY_EOP_MSK (0x00000080) +#define ALT_SGDMA_DESCRIPTOR_STATUS_ERROR_MSK (0x0000007F) + +/* + * The SGDMA controller buffer descriptor allocates + * 64 bits for each address. To support ANSI C, the + * struct implementing a descriptor places 32-bits + * of padding directly above each address; each pad must + * be cleared when initializing a descriptor. + */ + +/* + * Buffer Descriptor data structure + * + */ +struct alt_sgdma_descriptor { + unsigned int *source; /* the address of data to be read. */ + unsigned int source_pad; + + unsigned int *destination; /* the address to write data */ + unsigned int destination_pad; + + unsigned int *next; /* the next descriptor in the list. */ + unsigned int next_pad; + + unsigned short bytes_to_transfer; /* the number of bytes to transfer */ + unsigned char read_burst; + unsigned char write_burst; + + unsigned short actual_bytes_transferred;/* bytes transferred by DMA */ + unsigned char descriptor_status; + unsigned char descriptor_control; + +} __packed_1_; + +/* SG-DMA Control/Status Slave registers map */ + +struct alt_sgdma_registers { + unsigned int status; + unsigned int status_pad[3]; + unsigned int control; + unsigned int control_pad[3]; + unsigned int next_descriptor_pointer; + unsigned int descriptor_pad[3]; +}; + +/* TSE Stuff */ +#define ALTERA_TSE_CMD_TX_ENA_MSK (0x00000001) +#define ALTERA_TSE_CMD_RX_ENA_MSK (0x00000002) +#define ALTERA_TSE_CMD_XON_GEN_MSK (0x00000004) +#define ALTERA_TSE_CMD_ETH_SPEED_MSK (0x00000008) +#define ALTERA_TSE_CMD_PROMIS_EN_MSK (0x00000010) +#define ALTERA_TSE_CMD_PAD_EN_MSK (0x00000020) +#define ALTERA_TSE_CMD_CRC_FWD_MSK (0x00000040) +#define ALTERA_TSE_CMD_PAUSE_FWD_MSK (0x00000080) +#define ALTERA_TSE_CMD_PAUSE_IGNORE_MSK (0x00000100) +#define ALTERA_TSE_CMD_TX_ADDR_INS_MSK (0x00000200) +#define ALTERA_TSE_CMD_HD_ENA_MSK (0x00000400) +#define ALTERA_TSE_CMD_EXCESS_COL_MSK (0x00000800) +#define ALTERA_TSE_CMD_LATE_COL_MSK (0x00001000) +#define ALTERA_TSE_CMD_SW_RESET_MSK (0x00002000) +#define ALTERA_TSE_CMD_MHASH_SEL_MSK (0x00004000) +#define ALTERA_TSE_CMD_LOOPBACK_MSK (0x00008000) +/* Bits (18:16) = address select */ +#define ALTERA_TSE_CMD_TX_ADDR_SEL_MSK (0x00070000) +#define ALTERA_TSE_CMD_MAGIC_ENA_MSK (0x00080000) +#define ALTERA_TSE_CMD_SLEEP_MSK (0x00100000) +#define ALTERA_TSE_CMD_WAKEUP_MSK (0x00200000) +#define ALTERA_TSE_CMD_XOFF_GEN_MSK (0x00400000) +#define ALTERA_TSE_CMD_CNTL_FRM_ENA_MSK (0x00800000) +#define ALTERA_TSE_CMD_NO_LENGTH_CHECK_MSK (0x01000000) +#define ALTERA_TSE_CMD_ENA_10_MSK (0x02000000) +#define ALTERA_TSE_CMD_RX_ERR_DISC_MSK (0x04000000) +/* Bits (30..27) reserved */ +#define ALTERA_TSE_CMD_CNT_RESET_MSK (0x80000000) + +#define ALTERA_TSE_TX_CMD_STAT_TX_SHIFT16 (0x00040000) +#define ALTERA_TSE_TX_CMD_STAT_OMIT_CRC (0x00020000) + +#define ALTERA_TSE_RX_CMD_STAT_RX_SHIFT16 (0x02000000) + +#define ALT_TSE_SW_RESET_WATCHDOG_CNTR 10000 +#define ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR 90000000 + +#define ALT_TSE_SW_RESET_WATCHDOG_TOUT 1 /* ms */ +#define ALT_TSE_SGDMA_BUSY_WATCHDOG_TOUT 5 /* ms */ + +struct alt_tse_mdio { + unsigned int control; /*PHY device operation control register */ + unsigned int status; /*PHY device operation status register */ + unsigned int phy_id1; /*Bits 31:16 of PHY identifier. */ + unsigned int phy_id2; /*Bits 15:0 of PHY identifier. */ + unsigned int auto_negotiation_advertisement; + unsigned int remote_partner_base_page_ability; + + unsigned int reg6; + unsigned int reg7; + unsigned int reg8; + unsigned int reg9; + unsigned int rega; + unsigned int regb; + unsigned int regc; + unsigned int regd; + unsigned int rege; + unsigned int regf; + unsigned int reg10; + unsigned int reg11; + unsigned int reg12; + unsigned int reg13; + unsigned int reg14; + unsigned int reg15; + unsigned int reg16; + unsigned int reg17; + unsigned int reg18; + unsigned int reg19; + unsigned int reg1a; + unsigned int reg1b; + unsigned int reg1c; + unsigned int reg1d; + unsigned int reg1e; + unsigned int reg1f; +}; + +/* MAC register Space */ + +struct alt_tse_mac { + unsigned int megacore_revision; + unsigned int scratch_pad; + unsigned int command_config; + unsigned int mac_addr_0; + unsigned int mac_addr_1; + unsigned int max_frame_length; + unsigned int pause_quanta; + unsigned int rx_sel_empty_threshold; + unsigned int rx_sel_full_threshold; + unsigned int tx_sel_empty_threshold; + unsigned int tx_sel_full_threshold; + unsigned int rx_almost_empty_threshold; + unsigned int rx_almost_full_threshold; + unsigned int tx_almost_empty_threshold; + unsigned int tx_almost_full_threshold; + unsigned int mdio_phy0_addr; + unsigned int mdio_phy1_addr; + + /* only if 100/1000 BaseX PCS, reserved otherwise */ + unsigned int reservedx44[5]; + + unsigned int reg_read_access_status; + unsigned int min_tx_ipg_length; + + /* IEEE 802.3 oEntity Managed Object Support */ + unsigned int aMACID_1; /*The MAC addresses */ + unsigned int aMACID_2; + unsigned int aFramesTransmittedOK; + unsigned int aFramesReceivedOK; + unsigned int aFramesCheckSequenceErrors; + unsigned int aAlignmentErrors; + unsigned int aOctetsTransmittedOK; + unsigned int aOctetsReceivedOK; + + /* IEEE 802.3 oPausedEntity Managed Object Support */ + unsigned int aTxPAUSEMACCtrlFrames; + unsigned int aRxPAUSEMACCtrlFrames; + + /* IETF MIB (MIB-II) Object Support */ + unsigned int ifInErrors; + unsigned int ifOutErrors; + unsigned int ifInUcastPkts; + unsigned int ifInMulticastPkts; + unsigned int ifInBroadcastPkts; + unsigned int ifOutDiscards; + unsigned int ifOutUcastPkts; + unsigned int ifOutMulticastPkts; + unsigned int ifOutBroadcastPkts; + + /* IETF RMON MIB Object Support */ + unsigned int etherStatsDropEvent; + unsigned int etherStatsOctets; + unsigned int etherStatsPkts; + unsigned int etherStatsUndersizePkts; + unsigned int etherStatsOversizePkts; + unsigned int etherStatsPkts64Octets; + unsigned int etherStatsPkts65to127Octets; + unsigned int etherStatsPkts128to255Octets; + unsigned int etherStatsPkts256to511Octets; + unsigned int etherStatsPkts512to1023Octets; + unsigned int etherStatsPkts1024to1518Octets; + + unsigned int etherStatsPkts1519toXOctets; + unsigned int etherStatsJabbers; + unsigned int etherStatsFragments; + + unsigned int reservedxE4; + + /*FIFO control register. */ + unsigned int tx_cmd_stat; + unsigned int rx_cmd_stat; + + unsigned int ipaccTxConf; + unsigned int ipaccRxConf; + unsigned int ipaccRxStat; + unsigned int ipaccRxStatSum; + + /*Multicast address resolution table */ + unsigned int hash_table[64]; + + /*Registers 0 to 31 within PHY device 0/1 */ + struct alt_tse_mdio mdio_phy0; + struct alt_tse_mdio mdio_phy1; + + /*4 Supplemental MAC Addresses */ + unsigned int supp_mac_addr_0_0; + unsigned int supp_mac_addr_0_1; + unsigned int supp_mac_addr_1_0; + unsigned int supp_mac_addr_1_1; + unsigned int supp_mac_addr_2_0; + unsigned int supp_mac_addr_2_1; + unsigned int supp_mac_addr_3_0; + unsigned int supp_mac_addr_3_1; + + unsigned int reservedx320[56]; +}; + +/* flags: TSE MII modes */ +/* GMII/MII = 0 */ +/* RGMII = 1 */ +/* RGMII_ID = 2 */ +/* RGMII_TXID = 3 */ +/* RGMII_RXID = 4 */ +/* SGMII = 5 */ +struct altera_tse_priv { + char devname[16]; + struct alt_tse_mac *mac_dev; + struct alt_sgdma_registers *sgdma_rx; + struct alt_sgdma_registers *sgdma_tx; + unsigned int rx_sgdma_irq; + unsigned int tx_sgdma_irq; + unsigned int has_descriptor_mem; + unsigned int descriptor_mem_base; + unsigned int descriptor_mem_size; + struct alt_sgdma_descriptor *rx_desc; + struct alt_sgdma_descriptor *tx_desc; + struct phy_info *phyinfo; + unsigned int phyaddr; + unsigned int flags; + unsigned int link; + unsigned int duplexity; + unsigned int speed; + struct mii_device *miidev; +}; + +/* Phy stuff continued */ +/* + * struct phy_cmd: A command for reading or writing a PHY register + * + * mii_reg: The register to read or write + * + * mii_data: For writes, the value to put in the register. + * A value of -1 indicates this is a read. + * + * funct: A function pointer which is invoked for each command. + * For reads, this function will be passed the value read + * from the PHY, and process it. + * For writes, the result of this function will be written + * to the PHY register + */ +struct phy_cmd { + uint mii_reg; + uint mii_data; + uint(*funct) (uint mii_reg, struct altera_tse_priv *priv); +}; +#endif /* _ALTERA_TSE_H_ */ -- 1.7.0.4 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox