From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 5/8] malloc: put common memory functions to seperate file
Date: Fri, 8 Apr 2011 16:56:16 +0200 [thread overview]
Message-ID: <1302274579-11158-6-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1302274579-11158-1-git-send-email-s.hauer@pengutronix.de>
These functions are needed independently of the specific
malloc implementation, so move them out.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
common/Makefile | 1 +
common/dlmalloc.c | 50 -------------------------------------
common/memory.c | 71 +++++++++++++++++++++++++++++++++++++++++++++++++++++
include/malloc.h | 1 +
4 files changed, 73 insertions(+), 50 deletions(-)
create mode 100644 common/memory.c
diff --git a/common/Makefile b/common/Makefile
index 6a04460..aa2c222 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_AUTO_COMPLETE) += complete.o
obj-$(CONFIG_POLLER) += poller.o
obj-$(CONFIG_BLOCK) += block.o
+obj-y += memory.o
obj-y += dlmalloc.o
obj-y += clock.o
obj-y += version.o
diff --git a/common/dlmalloc.c b/common/dlmalloc.c
index ff63fbe..f9e1828 100644
--- a/common/dlmalloc.c
+++ b/common/dlmalloc.c
@@ -882,56 +882,6 @@ static mbinptr av_[NAV * 2 + 2] = {
/* ----------------------------------------------------------------------- */
-/*
- * Begin and End of memory area for malloc(), and current "brk"
- */
-static ulong malloc_start;
-static ulong malloc_end;
-static ulong malloc_brk;
-
-ulong mem_malloc_start(void)
-{
- return malloc_start;
-}
-
-ulong mem_malloc_end(void)
-{
- return malloc_end;
-}
-
-void mem_malloc_init(void *start, void *end)
-{
- malloc_start = (ulong)start;
- malloc_end = (ulong)end;
- malloc_brk = malloc_start;
-}
-
-static void *sbrk_no_zero(ptrdiff_t increment)
-{
- ulong old = malloc_brk;
- ulong new = old + increment;
-
- if ((new < malloc_start) || (new > malloc_end))
- return NULL;
-
- malloc_brk = new;
-
- return (void *)old;
-}
-
-static void *sbrk(ptrdiff_t increment)
-{
- void *old = sbrk_no_zero(increment);
-
- /* Only clear increment, if valid address was returned */
- if (old != NULL)
- memset(old, 0, increment);
-
- return old;
-}
-
-/* ----------------------------------------------------------------------- */
-
/* Other static bookkeeping data */
/* variables holding tunable values */
diff --git a/common/memory.c b/common/memory.c
new file mode 100644
index 0000000..8f4a768
--- /dev/null
+++ b/common/memory.c
@@ -0,0 +1,71 @@
+/*
+ * memory.c
+ *
+ * Copyright (c) 2011 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * Begin and End of memory area for malloc(), and current "brk"
+ */
+static unsigned long malloc_start;
+static unsigned long malloc_end;
+static unsigned long malloc_brk;
+
+unsigned long mem_malloc_start(void)
+{
+ return malloc_start;
+}
+
+unsigned long mem_malloc_end(void)
+{
+ return malloc_end;
+}
+
+void mem_malloc_init(void *start, void *end)
+{
+ malloc_start = (unsigned long)start;
+ malloc_end = (unsigned long)end;
+ malloc_brk = malloc_start;
+}
+
+static void *sbrk_no_zero(ptrdiff_t increment)
+{
+ unsigned long old = malloc_brk;
+ unsigned long new = old + increment;
+
+ if ((new < malloc_start) || (new > malloc_end))
+ return NULL;
+
+ malloc_brk = new;
+
+ return (void *)old;
+}
+
+void *sbrk(ptrdiff_t increment)
+{
+ void *old = sbrk_no_zero(increment);
+
+ /* Only clear increment, if valid address was returned */
+ if (old != NULL)
+ memset(old, 0, increment);
+
+ return old;
+}
diff --git a/include/malloc.h b/include/malloc.h
index 4b0567e..7b9b062 100644
--- a/include/malloc.h
+++ b/include/malloc.h
@@ -18,6 +18,7 @@ size_t malloc_usable_size(void*);
void malloc_stats(void);
int mallopt(int, int);
struct mallinfo mallinfo(void);
+void *sbrk(ptrdiff_t increment);
#endif
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2011-04-08 14:56 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-08 14:56 Size reduction patches Sascha Hauer
2011-04-08 14:56 ` [PATCH 1/8] env: Make environment variable support optional Sascha Hauer
2011-04-08 14:56 ` [PATCH 2/8] make command " Sascha Hauer
2011-04-08 14:56 ` [PATCH 3/8] add noshell support Sascha Hauer
2011-04-08 14:56 ` [PATCH 4/8] arm: compile icache command only when command support is present Sascha Hauer
2011-04-08 14:56 ` Sascha Hauer [this message]
2011-04-08 14:56 ` [PATCH 6/8] add dummy_malloc functions Sascha Hauer
2011-04-08 14:56 ` [PATCH 7/8] ARM: make exception handling optional Sascha Hauer
2011-04-08 14:56 ` [PATCH 8/8] nand: make reading oob optional Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1302274579-11158-6-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox