From: franck.jullien@gmail.com
To: barebox@lists.infradead.org
Subject: [PATCH 2/3] [v3] Nios2: Add Altera TSE driver
Date: Mon, 11 Apr 2011 23:52:08 +0200 [thread overview]
Message-ID: <1302558729-3298-3-git-send-email-franck.jullien@gmail.com> (raw)
In-Reply-To: <1302558729-3298-1-git-send-email-franck.jullien@gmail.com>
From: Franck JULLIEN <franck.jullien@gmail.com>
Add Altera Triple Speed Ethernet driver
Signed-off-by: Franck JULLIEN <franck.jullien@gmail.com>
---
drivers/net/Kconfig | 16 ++
drivers/net/Makefile | 1 +
drivers/net/altera_tse.c | 579 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/altera_tse.h | 303 ++++++++++++++++++++++++
4 files changed, 899 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/altera_tse.c
create mode 100644 drivers/net/altera_tse.h
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 6479417..19e35db 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -84,6 +84,22 @@ config DRIVER_NET_TAP
bool "tap Ethernet driver"
depends on LINUX
+config DRIVER_NET_TSE
+ depends on NIOS2
+ bool "Altera TSE ethernet driver"
+ select MIIDEV
+ help
+ This option enables support for the Altera TSE MAC.
+
+config TSE_USE_DEDICATED_DESC_MEM
+ depends on DRIVER_NET_TSE
+ bool "Altera TSE uses dedicated descriptor memory"
+ help
+ This option tells the TSE driver to use an onchip memory
+ to store SGDMA descriptors. Descriptor memory is not
+ reserved with a malloc but directly mapped to the memory
+ address (defined in config.h)
+
source "drivers/net/usb/Kconfig"
endmenu
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index ab23d22..f02618b 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_DRIVER_NET_MACB) += macb.o
obj-$(CONFIG_DRIVER_NET_TAP) += tap.o
obj-$(CONFIG_MIIDEV) += miidev.o
obj-$(CONFIG_NET_USB) += usb/
+obj-$(CONFIG_DRIVER_NET_TSE) += altera_tse.o
diff --git a/drivers/net/altera_tse.c b/drivers/net/altera_tse.c
new file mode 100644
index 0000000..d922a9a
--- /dev/null
+++ b/drivers/net/altera_tse.c
@@ -0,0 +1,579 @@
+/*
+ * Altera TSE Network driver
+ *
+ * Copyright (C) 2008 Altera Corporation.
+ * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw>
+ * Copyright (C) 2011 Franck JULLIEN, <elec4fun@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <net.h>
+#include <miidev.h>
+#include <init.h>
+#include <clock.h>
+#include <linux/mii.h>
+
+#include <asm/io.h>
+#include <asm/dma-mapping.h>
+
+#include "altera_tse.h"
+
+/* This is a generic routine that the SGDMA mode-specific routines
+ * call to populate a descriptor.
+ * arg1 :pointer to first SGDMA descriptor.
+ * arg2 :pointer to next SGDMA descriptor.
+ * arg3 :Address to where data to be written.
+ * arg4 :Address from where data to be read.
+ * arg5 :no of byte to transaction.
+ * arg6 :variable indicating to generate start of packet or not
+ * arg7 :read fixed
+ * arg8 :write fixed
+ * arg9 :read burst
+ * arg10 :write burst
+ * arg11 :atlantic_channel number
+ */
+static void alt_sgdma_construct_descriptor_burst(
+ struct alt_sgdma_descriptor *desc,
+ struct alt_sgdma_descriptor *next,
+ uint32_t *read_addr,
+ uint32_t *write_addr,
+ uint16_t length_or_eop,
+ uint8_t generate_eop,
+ uint8_t read_fixed,
+ uint8_t write_fixed_or_sop,
+ uint8_t read_burst,
+ uint8_t write_burst,
+ uint8_t atlantic_channel)
+{
+ uint32_t temp;
+
+ /*
+ * Mark the "next" descriptor as "not" owned by hardware. This prevents
+ * The SGDMA controller from continuing to process the chain. This is
+ * done as a single IO write to bypass cache, without flushing
+ * the entire descriptor, since only the 8-bit descriptor status must
+ * be flushed.
+ */
+ if (!next)
+ printf("Next descriptor not defined!!\n");
+
+ temp = readb(&next->descriptor_control);
+ writeb(temp & ~ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK,
+ &next->descriptor_control);
+
+ writel((uint32_t)read_addr, &desc->source);
+ writel((uint32_t)write_addr, &desc->destination);
+ writel((uint32_t)next, &desc->next);
+
+ writel(0, &desc->source_pad);
+ writel(0, &desc->destination_pad);
+ writel(0, &desc->next_pad);
+ writew(length_or_eop, &desc->bytes_to_transfer);
+ writew(0, &desc->actual_bytes_transferred);
+ writeb(0, &desc->descriptor_status);
+
+ /* SGDMA burst not currently supported */
+ writeb(0, &desc->read_burst);
+ writeb(0, &desc->write_burst);
+
+ /*
+ * Set the descriptor control block as follows:
+ * - Set "owned by hardware" bit
+ * - Optionally set "generate EOP" bit
+ * - Optionally set the "read from fixed address" bit
+ * - Optionally set the "write to fixed address bit (which serves
+ * serves as a "generate SOP" control bit in memory-to-stream mode).
+ * - Set the 4-bit atlantic channel, if specified
+ *
+ * Note this step is performed after all other descriptor information
+ * has been filled out so that, if the controller already happens to be
+ * pointing at this descriptor, it will not run (via the "owned by
+ * hardware" bit) until all other descriptor has been set up.
+ */
+
+ writeb((ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK) |
+ (generate_eop ? ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK : 0) |
+ (read_fixed ? ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK : 0) |
+ (write_fixed_or_sop ? ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK : 0) |
+ (atlantic_channel ? ((atlantic_channel & 0x0F) << 3) : 0),
+ &desc->descriptor_control);
+}
+
+static int alt_sgdma_do_sync_transfer(struct alt_sgdma_registers *dev,
+ struct alt_sgdma_descriptor *desc)
+{
+ uint32_t temp;
+ uint64_t start;
+ uint64_t tout;
+
+ /* Wait for any pending transfers to complete */
+ tout = ALT_TSE_SGDMA_BUSY_WATCHDOG_TOUT * MSECOND;
+
+ start = get_time_ns();
+
+ while (readl(&dev->status) & ALT_SGDMA_STATUS_BUSY_MSK) {
+ if (is_timeout(start, tout)) {
+ debug("Timeout waiting sgdma in do sync!\n");
+ break;
+ }
+ }
+
+ /*
+ * Clear any (previous) status register information
+ * that might occlude our error checking later.
+ */
+ writel(0xFF, &dev->status);
+
+ /* Point the controller at the descriptor */
+ writel((uint32_t)desc, &dev->next_descriptor_pointer);
+ debug("next desc in sgdma 0x%x\n", (uint32_t)dev->next_descriptor_pointer);
+
+ /*
+ * Set up SGDMA controller to:
+ * - Disable interrupt generation
+ * - Run once a valid descriptor is written to controller
+ * - Stop on an error with any particular descriptor
+ */
+ writel(ALT_SGDMA_CONTROL_RUN_MSK | ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK,
+ &dev->control);
+
+ /* Wait for the descriptor (chain) to complete */
+ debug("wait for sgdma....");
+ start = get_time_ns();
+
+ while (readl(&dev->status) & ALT_SGDMA_STATUS_BUSY_MSK) {
+ if (is_timeout(start, tout)) {
+ debug("Timeout waiting sgdma in do sync!\n");
+ break;
+ }
+ }
+
+ debug("done\n");
+
+ /* Clear Run */
+ temp = readl(&dev->control);
+ writel(temp & ~ALT_SGDMA_CONTROL_RUN_MSK, &dev->control);
+
+ /* Get & clear status register contents */
+ debug("tx sgdma status = 0x%x", readl(&dev->status));
+ writel(0xFF, &dev->status);
+
+ return 0;
+}
+
+static int alt_sgdma_do_async_transfer(struct alt_sgdma_registers *dev,
+ struct alt_sgdma_descriptor *desc)
+{
+ uint64_t start;
+ uint64_t tout;
+
+ /* Wait for any pending transfers to complete */
+ tout = ALT_TSE_SGDMA_BUSY_WATCHDOG_TOUT * MSECOND;
+
+ start = get_time_ns();
+
+ while (readl(&dev->status) & ALT_SGDMA_STATUS_BUSY_MSK) {
+ if (is_timeout(start, tout)) {
+ debug("Timeout waiting sgdma in do async!\n");
+ break;
+ }
+ }
+
+ /*
+ * Clear any (previous) status register information
+ * that might occlude our error checking later.
+ */
+ writel(0xFF, &dev->status);
+
+ /* Point the controller at the descriptor */
+ writel((uint32_t)desc, &dev->next_descriptor_pointer);
+
+ /*
+ * Set up SGDMA controller to:
+ * - Disable interrupt generation
+ * - Run once a valid descriptor is written to controller
+ * - Stop on an error with any particular descriptor
+ */
+ writel(ALT_SGDMA_CONTROL_RUN_MSK | ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK,
+ &dev->control);
+
+ return 0;
+}
+
+static int tse_get_ethaddr(struct eth_device *edev, unsigned char *m)
+{
+ struct altera_tse_priv *priv = edev->priv;
+ struct alt_tse_mac *mac_dev = priv->mac_dev;
+
+ m[5] = (readl(&mac_dev->mac_addr_1) >> 8) && 0xFF;
+ m[4] = (readl(&mac_dev->mac_addr_1)) && 0xFF;
+ m[3] = (readl(&mac_dev->mac_addr_0) >> 24) && 0xFF;
+ m[2] = (readl(&mac_dev->mac_addr_0) >> 16) && 0xFF;
+ m[1] = (readl(&mac_dev->mac_addr_0) >> 8) && 0xFF;
+ m[0] = (readl(&mac_dev->mac_addr_0)) && 0xFF;
+
+ return 0;
+}
+
+static int tse_set_ethaddr(struct eth_device *edev, unsigned char *m)
+{
+ struct altera_tse_priv *priv = edev->priv;
+ struct alt_tse_mac *mac_dev = priv->mac_dev;
+
+ debug("Setting MAC address to %02x:%02x:%02x:%02x:%02x:%02x\n",
+ m[0], m[1], m[2], m[3], m[4], m[5]);
+
+ writel(m[3] << 24 | m[2] << 16 | m[1] << 8 | m[0], &mac_dev->mac_addr_0);
+ writel((m[5] << 8 | m[4]) & 0xFFFF, &mac_dev->mac_addr_1);
+
+ return 0;
+}
+
+static int tse_phy_read(struct mii_device *mdev, int phy_addr, int reg)
+{
+ struct eth_device *edev = mdev->edev;
+ struct alt_tse_mac *mac_dev;
+ uint32_t *mdio_regs;
+
+ mac_dev = (struct alt_tse_mac *)edev->iobase;
+ writel(phy_addr, &mac_dev->mdio_phy1_addr);
+
+ mdio_regs = (uint32_t *)&mac_dev->mdio_phy1;
+
+ return readl(&mdio_regs[reg]) & 0xFFFF;
+}
+
+static int tse_phy_write(struct mii_device *mdev, int phy_addr, int reg, int val)
+{
+ struct eth_device *edev = mdev->edev;
+ struct alt_tse_mac *mac_dev;
+ uint32_t *mdio_regs;
+
+ mac_dev = (struct alt_tse_mac *)edev->iobase;
+ writel(phy_addr, &mac_dev->mdio_phy1_addr);
+
+ mdio_regs = (uint32_t *)&mac_dev->mdio_phy1;
+
+ writel((uint32_t)val, &mdio_regs[reg]);
+
+ return 0;
+}
+
+static void tse_reset(struct eth_device *edev)
+{
+ /* stop sgdmas, disable tse receive */
+ struct altera_tse_priv *priv = edev->priv;
+ struct alt_tse_mac *mac_dev = priv->mac_dev;
+ struct alt_sgdma_registers *rx_sgdma = priv->sgdma_rx;
+ struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx;
+ struct alt_sgdma_descriptor *rx_desc = (struct alt_sgdma_descriptor *)&priv->rx_desc[0];
+ struct alt_sgdma_descriptor *tx_desc = (struct alt_sgdma_descriptor *)&priv->tx_desc[0];
+ uint64_t start;
+ uint64_t tout;
+
+ tout = ALT_TSE_SGDMA_BUSY_WATCHDOG_TOUT * MSECOND;
+
+ /* clear rx desc & wait for sgdma to complete */
+ writeb(0, &rx_desc->descriptor_control);
+ writel(0, &rx_sgdma->control);
+
+ writel(ALT_SGDMA_CONTROL_SOFTWARERESET_MSK, &rx_sgdma->control);
+ writel(ALT_SGDMA_CONTROL_SOFTWARERESET_MSK, &rx_sgdma->control);
+ mdelay(100);
+
+ start = get_time_ns();
+
+ while (readl(&rx_sgdma->status) & ALT_SGDMA_STATUS_BUSY_MSK) {
+ if (is_timeout(start, tout)) {
+ printf("Timeout waiting for rx sgdma!\n");
+ writel(ALT_SGDMA_CONTROL_SOFTWARERESET_MSK, &rx_sgdma->control);
+ writel(ALT_SGDMA_CONTROL_SOFTWARERESET_MSK, &rx_sgdma->control);
+ break;
+ }
+ }
+
+ /* clear tx desc & wait for sgdma to complete */
+ writeb(0, &tx_desc->descriptor_control);
+ writel(0, &tx_sgdma->control);
+
+ writel(ALT_SGDMA_CONTROL_SOFTWARERESET_MSK, &tx_sgdma->control);
+ writel(ALT_SGDMA_CONTROL_SOFTWARERESET_MSK, &tx_sgdma->control);
+ mdelay(100);
+
+ start = get_time_ns();
+
+ while (readl(&tx_sgdma->status) & ALT_SGDMA_STATUS_BUSY_MSK) {
+ if (is_timeout(start, tout)) {
+ printf("Timeout waiting for tx sgdma!\n");
+ writel(ALT_SGDMA_CONTROL_SOFTWARERESET_MSK, &tx_sgdma->control);
+ writel(ALT_SGDMA_CONTROL_SOFTWARERESET_MSK, &tx_sgdma->control);
+ break;
+ }
+ }
+
+ /* reset the mac */
+ writel(ALTERA_TSE_CMD_TX_ENA_MSK | ALTERA_TSE_CMD_RX_ENA_MSK |
+ ALTERA_TSE_CMD_SW_RESET_MSK, &mac_dev->command_config);
+
+ start = get_time_ns();
+ tout = ALT_TSE_SW_RESET_WATCHDOG_TOUT * MSECOND;
+
+ while (readl(&mac_dev->command_config) & ALTERA_TSE_CMD_SW_RESET_MSK) {
+ if (is_timeout(start, tout)) {
+ printf("TSEMAC SW reset bit never cleared!\n");
+ break;
+ }
+ }
+}
+
+static int tse_eth_open(struct eth_device *edev)
+{
+ struct altera_tse_priv *priv = edev->priv;
+
+ miidev_wait_aneg(priv->miidev);
+ miidev_print_status(priv->miidev);
+
+ return 0;
+}
+
+static int tse_eth_send(struct eth_device *edev, void *packet, int length)
+{
+
+ struct altera_tse_priv *priv = edev->priv;
+ struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx;
+ struct alt_sgdma_descriptor *tx_desc = (struct alt_sgdma_descriptor *)priv->tx_desc;
+
+ struct alt_sgdma_descriptor *tx_desc_cur = (struct alt_sgdma_descriptor *)&tx_desc[0];
+
+ flush_dcache_range((uint32_t)packet, (uint32_t)packet + length);
+ alt_sgdma_construct_descriptor_burst(
+ (struct alt_sgdma_descriptor *)&tx_desc[0],
+ (struct alt_sgdma_descriptor *)&tx_desc[1],
+ (uint32_t *)packet, /* read addr */
+ (uint32_t *)0, /* */
+ length, /* length or EOP ,will change for each tx */
+ 0x1, /* gen eop */
+ 0x0, /* read fixed */
+ 0x1, /* write fixed or sop */
+ 0x0, /* read burst */
+ 0x0, /* write burst */
+ 0x0 /* channel */
+ );
+
+ alt_sgdma_do_sync_transfer(tx_sgdma, tx_desc_cur);
+
+ return 0;;
+}
+
+static void tse_eth_halt(struct eth_device *edev)
+{
+ struct altera_tse_priv *priv = edev->priv;
+ struct alt_sgdma_registers *rx_sgdma = priv->sgdma_rx;
+ struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx;
+
+ writel(0, &rx_sgdma->control); /* Stop the controller and reset settings */
+ writel(0, &tx_sgdma->control); /* Stop the controller and reset settings */
+}
+
+static int tse_eth_rx(struct eth_device *edev)
+{
+ uint16_t packet_length = 0;
+
+ struct altera_tse_priv *priv = edev->priv;
+ struct alt_sgdma_descriptor *rx_desc = (struct alt_sgdma_descriptor *)priv->rx_desc;
+ struct alt_sgdma_descriptor *rx_desc_cur = &rx_desc[0];
+ struct alt_sgdma_registers *rx_sgdma = priv->sgdma_rx;
+
+ if (rx_desc_cur->descriptor_status &
+ ALT_SGDMA_DESCRIPTOR_STATUS_TERMINATED_BY_EOP_MSK) {
+
+ packet_length = rx_desc->actual_bytes_transferred;
+ net_receive(NetRxPackets[0], packet_length);
+
+ /* Clear Run */
+ rx_sgdma->control = (rx_sgdma->control & (~ALT_SGDMA_CONTROL_RUN_MSK));
+
+ /* start descriptor again */
+ flush_dcache_range((uint32_t)(NetRxPackets[0]), (uint32_t)(NetRxPackets[0]) + PKTSIZE);
+ alt_sgdma_construct_descriptor_burst(
+ (struct alt_sgdma_descriptor *)&rx_desc[0],
+ (struct alt_sgdma_descriptor *)&rx_desc[1],
+ (uint32_t)0x0, /* read addr */
+ (uint32_t *)NetRxPackets[0], /* */
+ 0x0, /* length or EOP */
+ 0x0, /* gen eop */
+ 0x0, /* read fixed */
+ 0x0, /* write fixed or sop */
+ 0x0, /* read burst */
+ 0x0, /* write burst */
+ 0x0 /* channel */
+ );
+
+ /* setup the sgdma */
+ alt_sgdma_do_async_transfer(priv->sgdma_rx, &rx_desc[0]);
+ }
+
+ return 0;
+}
+
+static int tse_init_dev(struct eth_device *edev)
+{
+ struct altera_tse_priv *priv = edev->priv;
+ struct alt_tse_mac *mac_dev = priv->mac_dev;
+ struct alt_sgdma_descriptor *tx_desc = priv->tx_desc;
+ struct alt_sgdma_descriptor *rx_desc = priv->rx_desc;
+ struct alt_sgdma_descriptor *rx_desc_cur;
+
+ rx_desc_cur = (struct alt_sgdma_descriptor *)&rx_desc[0];
+
+ tse_reset(edev);
+
+ /* need to create sgdma */
+ alt_sgdma_construct_descriptor_burst(
+ (struct alt_sgdma_descriptor *)&tx_desc[0],
+ (struct alt_sgdma_descriptor *)&tx_desc[1],
+ (uint32_t *)NULL, /* read addr */
+ (uint32_t *)0, /* */
+ 0, /* length or EOP ,will change for each tx */
+ 0x1, /* gen eop */
+ 0x0, /* read fixed */
+ 0x1, /* write fixed or sop */
+ 0x0, /* read burst */
+ 0x0, /* write burst */
+ 0x0 /* channel */
+ );
+
+ flush_dcache_range((uint32_t)(NetRxPackets[0]), (uint32_t)(NetRxPackets[0]) + PKTSIZE);
+ alt_sgdma_construct_descriptor_burst(
+ (struct alt_sgdma_descriptor *)&rx_desc[0],
+ (struct alt_sgdma_descriptor *)&rx_desc[1],
+ (uint32_t)0x0, /* read addr */
+ (uint32_t *)NetRxPackets[0], /* */
+ 0x0, /* length or EOP */
+ 0x0, /* gen eop */
+ 0x0, /* read fixed */
+ 0x0, /* write fixed or sop */
+ 0x0, /* read burst */
+ 0x0, /* write burst */
+ 0x0 /* channel */
+ );
+
+ /* start rx async transfer */
+ alt_sgdma_do_async_transfer(priv->sgdma_rx, rx_desc_cur);
+
+ /* Initialize MAC registers */
+ writel(PKTSIZE, &mac_dev->max_frame_length);
+
+ /* NO Shift */
+ writel(0, &mac_dev->rx_cmd_stat);
+ writel(0, &mac_dev->tx_cmd_stat);
+
+ /* enable MAC */
+ writel(ALTERA_TSE_CMD_TX_ENA_MSK | ALTERA_TSE_CMD_RX_ENA_MSK, &mac_dev->command_config);
+
+ miidev_restart_aneg(priv->miidev);
+
+ return 0;
+}
+
+static int tse_probe(struct device_d *dev)
+{
+ struct altera_tse_priv *priv;
+ struct mii_device *miidev;
+ struct eth_device *edev;
+ struct alt_sgdma_descriptor *rx_desc;
+ struct alt_sgdma_descriptor *tx_desc;
+#ifndef CONFIG_TSE_USE_DEDICATED_DESC_MEM
+ uint32_t dma_handle;
+#endif
+ edev = xzalloc(sizeof(struct eth_device) + sizeof(struct altera_tse_priv));
+ miidev = xzalloc(sizeof(struct mii_device));
+
+ dev->type_data = edev;
+ edev->priv = (struct altera_tse_priv *)(edev + 1);
+
+ edev->iobase = dev->map_base;
+
+ priv = edev->priv;
+
+ edev->init = tse_init_dev;
+ edev->open = tse_eth_open;
+ edev->send = tse_eth_send;
+ edev->recv = tse_eth_rx;
+ edev->halt = tse_eth_halt;
+ edev->get_ethaddr = tse_get_ethaddr;
+ edev->set_ethaddr = tse_set_ethaddr;
+
+#ifdef CONFIG_TSE_USE_DEDICATED_DESC_MEM
+ tx_desc = (struct alt_sgdma_descriptor *)NIOS_SOPC_TSE_DESC_MEM_BASE;
+ rx_desc = tx_desc + 2;
+#else
+ tx_desc = dma_alloc_coherent(sizeof(*tx_desc) * (3 + PKTBUFSRX), &dma_handle);
+ rx_desc = tx_desc + 2;
+
+ if (!tx_desc) {
+ free(edev);
+ free(miidev);
+ return 0;
+ }
+#endif
+
+ memset(rx_desc, 0, (sizeof *rx_desc) * (PKTBUFSRX + 1));
+ memset(tx_desc, 0, (sizeof *tx_desc) * 2);
+
+ priv->mac_dev = (struct alt_tse_mac *)dev->map_base;
+ priv->sgdma_rx = (struct alt_sgdma_registers *)NIOS_SOPC_SGDMA_RX_BASE;
+ priv->sgdma_tx = (struct alt_sgdma_registers *)NIOS_SOPC_SGDMA_TX_BASE;
+ priv->rx_desc = rx_desc;
+ priv->tx_desc = tx_desc;
+
+ priv->miidev = miidev;
+
+ miidev->read = tse_phy_read;
+ miidev->write = tse_phy_write;
+ miidev->flags = 0;
+ miidev->edev = edev;
+
+ if (dev->platform_data != NULL)
+ miidev->address = *((int8_t *)(dev->platform_data));
+ else {
+ printf("No PHY address specified.\n");
+ return -ENODEV;
+ }
+
+ mii_register(miidev);
+
+ return eth_register(edev);
+}
+
+static struct driver_d altera_tse_driver = {
+ .name = "altera_tse",
+ .probe = tse_probe,
+};
+
+static int tse_init(void)
+{
+ register_driver(&altera_tse_driver);
+ return 0;
+}
+
+device_initcall(tse_init);
+
diff --git a/drivers/net/altera_tse.h b/drivers/net/altera_tse.h
new file mode 100644
index 0000000..c907c74
--- /dev/null
+++ b/drivers/net/altera_tse.h
@@ -0,0 +1,303 @@
+/*
+ * Altera 10/100/1000 triple speed ethernet mac
+ *
+ * Copyright (C) 2008 Altera Corporation.
+ * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw>
+ * Copyright (C) 2011 Franck JULLIEN <elec4fun@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ALTERA_TSE_H_
+#define _ALTERA_TSE_H_
+
+/* SGDMA Stuff */
+#define ALT_SGDMA_STATUS_ERROR_MSK (0x00000001)
+#define ALT_SGDMA_STATUS_EOP_ENCOUNTERED_MSK (0x00000002)
+#define ALT_SGDMA_STATUS_DESC_COMPLETED_MSK (0x00000004)
+#define ALT_SGDMA_STATUS_CHAIN_COMPLETED_MSK (0x00000008)
+#define ALT_SGDMA_STATUS_BUSY_MSK (0x00000010)
+
+#define ALT_SGDMA_CONTROL_IE_ERROR_MSK (0x00000001)
+#define ALT_SGDMA_CONTROL_IE_EOP_ENCOUNTERED_MSK (0x00000002)
+#define ALT_SGDMA_CONTROL_IE_DESC_COMPLETED_MSK (0x00000004)
+#define ALT_SGDMA_CONTROL_IE_CHAIN_COMPLETED_MSK (0x00000008)
+#define ALT_SGDMA_CONTROL_IE_GLOBAL_MSK (0x00000010)
+#define ALT_SGDMA_CONTROL_RUN_MSK (0x00000020)
+#define ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK (0x00000040)
+#define ALT_SGDMA_CONTROL_IE_MAX_DESC_PROCESSED_MSK (0x00000080)
+#define ALT_SGDMA_CONTROL_MAX_DESC_PROCESSED_MSK (0x0000FF00)
+#define ALT_SGDMA_CONTROL_SOFTWARERESET_MSK (0x00010000)
+#define ALT_SGDMA_CONTROL_PARK_MSK (0x00020000)
+#define ALT_SGDMA_CONTROL_CLEAR_INTERRUPT_MSK (0x80000000)
+
+#define ALTERA_TSE_SGDMA_INTR_MASK (ALT_SGDMA_CONTROL_IE_CHAIN_COMPLETED_MSK \
+ | ALT_SGDMA_STATUS_DESC_COMPLETED_MSK \
+ | ALT_SGDMA_CONTROL_IE_GLOBAL_MSK)
+
+/*
+ * Descriptor control bit masks & offsets
+ *
+ * Note: The control byte physically occupies bits [31:24] in memory.
+ * The following bit-offsets are expressed relative to the LSB of
+ * the control register bitfield.
+ */
+#define ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK (0x00000001)
+#define ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK (0x00000002)
+#define ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK (0x00000004)
+#define ALT_SGDMA_DESCRIPTOR_CONTROL_ATLANTIC_CHANNEL_MSK (0x00000008)
+#define ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK (0x00000080)
+
+/*
+ * Descriptor status bit masks & offsets
+ *
+ * Note: The status byte physically occupies bits [23:16] in memory.
+ * The following bit-offsets are expressed relative to the LSB of
+ * the status register bitfield.
+ */
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_CRC_MSK (0x00000001)
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_PARITY_MSK (0x00000002)
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_OVERFLOW_MSK (0x00000004)
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_SYNC_MSK (0x00000008)
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_UEOP_MSK (0x00000010)
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_MEOP_MSK (0x00000020)
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_MSOP_MSK (0x00000040)
+#define ALT_SGDMA_DESCRIPTOR_STATUS_TERMINATED_BY_EOP_MSK (0x00000080)
+#define ALT_SGDMA_DESCRIPTOR_STATUS_ERROR_MSK (0x0000007F)
+
+/*
+ * The SGDMA controller buffer descriptor allocates
+ * 64 bits for each address. To support ANSI C, the
+ * struct implementing a descriptor places 32-bits
+ * of padding directly above each address; each pad must
+ * be cleared when initializing a descriptor.
+ */
+
+/*
+ * Buffer Descriptor data structure
+ *
+ */
+struct alt_sgdma_descriptor {
+ unsigned int *source; /* the address of data to be read. */
+ unsigned int source_pad;
+
+ unsigned int *destination; /* the address to write data */
+ unsigned int destination_pad;
+
+ unsigned int *next; /* the next descriptor in the list. */
+ unsigned int next_pad;
+
+ unsigned short bytes_to_transfer; /* the number of bytes to transfer */
+ unsigned char read_burst;
+ unsigned char write_burst;
+
+ unsigned short actual_bytes_transferred;/* bytes transferred by DMA */
+ unsigned char descriptor_status;
+ unsigned char descriptor_control;
+
+} __attribute__ ((packed, aligned(1)));
+
+/* SG-DMA Control/Status Slave registers map */
+
+struct alt_sgdma_registers {
+ unsigned int status;
+ unsigned int status_pad[3];
+ unsigned int control;
+ unsigned int control_pad[3];
+ unsigned int next_descriptor_pointer;
+ unsigned int descriptor_pad[3];
+};
+
+/* TSE Stuff */
+#define ALTERA_TSE_CMD_TX_ENA_MSK (0x00000001)
+#define ALTERA_TSE_CMD_RX_ENA_MSK (0x00000002)
+#define ALTERA_TSE_CMD_XON_GEN_MSK (0x00000004)
+#define ALTERA_TSE_CMD_ETH_SPEED_MSK (0x00000008)
+#define ALTERA_TSE_CMD_PROMIS_EN_MSK (0x00000010)
+#define ALTERA_TSE_CMD_PAD_EN_MSK (0x00000020)
+#define ALTERA_TSE_CMD_CRC_FWD_MSK (0x00000040)
+#define ALTERA_TSE_CMD_PAUSE_FWD_MSK (0x00000080)
+#define ALTERA_TSE_CMD_PAUSE_IGNORE_MSK (0x00000100)
+#define ALTERA_TSE_CMD_TX_ADDR_INS_MSK (0x00000200)
+#define ALTERA_TSE_CMD_HD_ENA_MSK (0x00000400)
+#define ALTERA_TSE_CMD_EXCESS_COL_MSK (0x00000800)
+#define ALTERA_TSE_CMD_LATE_COL_MSK (0x00001000)
+#define ALTERA_TSE_CMD_SW_RESET_MSK (0x00002000)
+#define ALTERA_TSE_CMD_MHASH_SEL_MSK (0x00004000)
+#define ALTERA_TSE_CMD_LOOPBACK_MSK (0x00008000)
+/* Bits (18:16) = address select */
+#define ALTERA_TSE_CMD_TX_ADDR_SEL_MSK (0x00070000)
+#define ALTERA_TSE_CMD_MAGIC_ENA_MSK (0x00080000)
+#define ALTERA_TSE_CMD_SLEEP_MSK (0x00100000)
+#define ALTERA_TSE_CMD_WAKEUP_MSK (0x00200000)
+#define ALTERA_TSE_CMD_XOFF_GEN_MSK (0x00400000)
+#define ALTERA_TSE_CMD_CNTL_FRM_ENA_MSK (0x00800000)
+#define ALTERA_TSE_CMD_NO_LENGTH_CHECK_MSK (0x01000000)
+#define ALTERA_TSE_CMD_ENA_10_MSK (0x02000000)
+#define ALTERA_TSE_CMD_RX_ERR_DISC_MSK (0x04000000)
+/* Bits (30..27) reserved */
+#define ALTERA_TSE_CMD_CNT_RESET_MSK (0x80000000)
+
+#define ALTERA_TSE_TX_CMD_STAT_TX_SHIFT16 (0x00040000)
+#define ALTERA_TSE_TX_CMD_STAT_OMIT_CRC (0x00020000)
+
+#define ALTERA_TSE_RX_CMD_STAT_RX_SHIFT16 (0x02000000)
+
+#define ALT_TSE_SW_RESET_WATCHDOG_CNTR 10000
+#define ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR 90000000
+
+#define ALT_TSE_SW_RESET_WATCHDOG_TOUT 1 /* ms */
+#define ALT_TSE_SGDMA_BUSY_WATCHDOG_TOUT 5 /* ms */
+
+struct alt_tse_mdio {
+ unsigned int control; /*PHY device operation control register */
+ unsigned int status; /*PHY device operation status register */
+ unsigned int phy_id1; /*Bits 31:16 of PHY identifier. */
+ unsigned int phy_id2; /*Bits 15:0 of PHY identifier. */
+ unsigned int auto_negotiation_advertisement;
+ unsigned int remote_partner_base_page_ability;
+
+ unsigned int reg6;
+ unsigned int reg7;
+ unsigned int reg8;
+ unsigned int reg9;
+ unsigned int rega;
+ unsigned int regb;
+ unsigned int regc;
+ unsigned int regd;
+ unsigned int rege;
+ unsigned int regf;
+ unsigned int reg10;
+ unsigned int reg11;
+ unsigned int reg12;
+ unsigned int reg13;
+ unsigned int reg14;
+ unsigned int reg15;
+ unsigned int reg16;
+ unsigned int reg17;
+ unsigned int reg18;
+ unsigned int reg19;
+ unsigned int reg1a;
+ unsigned int reg1b;
+ unsigned int reg1c;
+ unsigned int reg1d;
+ unsigned int reg1e;
+ unsigned int reg1f;
+};
+
+/* MAC register Space */
+
+struct alt_tse_mac {
+ unsigned int megacore_revision;
+ unsigned int scratch_pad;
+ unsigned int command_config;
+ unsigned int mac_addr_0;
+ unsigned int mac_addr_1;
+ unsigned int max_frame_length;
+ unsigned int pause_quanta;
+ unsigned int rx_sel_empty_threshold;
+ unsigned int rx_sel_full_threshold;
+ unsigned int tx_sel_empty_threshold;
+ unsigned int tx_sel_full_threshold;
+ unsigned int rx_almost_empty_threshold;
+ unsigned int rx_almost_full_threshold;
+ unsigned int tx_almost_empty_threshold;
+ unsigned int tx_almost_full_threshold;
+ unsigned int mdio_phy0_addr;
+ unsigned int mdio_phy1_addr;
+
+ /* only if 100/1000 BaseX PCS, reserved otherwise */
+ unsigned int reservedx44[5];
+
+ unsigned int reg_read_access_status;
+ unsigned int min_tx_ipg_length;
+
+ /* IEEE 802.3 oEntity Managed Object Support */
+ unsigned int aMACID_1; /*The MAC addresses */
+ unsigned int aMACID_2;
+ unsigned int aFramesTransmittedOK;
+ unsigned int aFramesReceivedOK;
+ unsigned int aFramesCheckSequenceErrors;
+ unsigned int aAlignmentErrors;
+ unsigned int aOctetsTransmittedOK;
+ unsigned int aOctetsReceivedOK;
+
+ /* IEEE 802.3 oPausedEntity Managed Object Support */
+ unsigned int aTxPAUSEMACCtrlFrames;
+ unsigned int aRxPAUSEMACCtrlFrames;
+
+ /* IETF MIB (MIB-II) Object Support */
+ unsigned int ifInErrors;
+ unsigned int ifOutErrors;
+ unsigned int ifInUcastPkts;
+ unsigned int ifInMulticastPkts;
+ unsigned int ifInBroadcastPkts;
+ unsigned int ifOutDiscards;
+ unsigned int ifOutUcastPkts;
+ unsigned int ifOutMulticastPkts;
+ unsigned int ifOutBroadcastPkts;
+
+ /* IETF RMON MIB Object Support */
+ unsigned int etherStatsDropEvent;
+ unsigned int etherStatsOctets;
+ unsigned int etherStatsPkts;
+ unsigned int etherStatsUndersizePkts;
+ unsigned int etherStatsOversizePkts;
+ unsigned int etherStatsPkts64Octets;
+ unsigned int etherStatsPkts65to127Octets;
+ unsigned int etherStatsPkts128to255Octets;
+ unsigned int etherStatsPkts256to511Octets;
+ unsigned int etherStatsPkts512to1023Octets;
+ unsigned int etherStatsPkts1024to1518Octets;
+
+ unsigned int etherStatsPkts1519toXOctets;
+ unsigned int etherStatsJabbers;
+ unsigned int etherStatsFragments;
+
+ unsigned int reservedxE4;
+
+ /*FIFO control register. */
+ unsigned int tx_cmd_stat;
+ unsigned int rx_cmd_stat;
+
+ unsigned int ipaccTxConf;
+ unsigned int ipaccRxConf;
+ unsigned int ipaccRxStat;
+ unsigned int ipaccRxStatSum;
+
+ /*Multicast address resolution table */
+ unsigned int hash_table[64];
+
+ /*Registers 0 to 31 within PHY device 0/1 */
+ struct alt_tse_mdio mdio_phy0;
+ struct alt_tse_mdio mdio_phy1;
+
+ /*4 Supplemental MAC Addresses */
+ unsigned int supp_mac_addr_0_0;
+ unsigned int supp_mac_addr_0_1;
+ unsigned int supp_mac_addr_1_0;
+ unsigned int supp_mac_addr_1_1;
+ unsigned int supp_mac_addr_2_0;
+ unsigned int supp_mac_addr_2_1;
+ unsigned int supp_mac_addr_3_0;
+ unsigned int supp_mac_addr_3_1;
+
+ unsigned int reservedx320[56];
+};
+
+struct altera_tse_priv {
+ struct alt_tse_mac *mac_dev;
+ struct alt_sgdma_registers *sgdma_rx;
+ struct alt_sgdma_registers *sgdma_tx;
+ unsigned int rx_sgdma_irq;
+ unsigned int tx_sgdma_irq;
+ unsigned int has_descriptor_mem;
+ unsigned int descriptor_mem_base;
+ unsigned int descriptor_mem_size;
+ struct alt_sgdma_descriptor *rx_desc;
+ struct alt_sgdma_descriptor *tx_desc;
+ struct mii_device *miidev;
+};
+
+#endif /* _ALTERA_TSE_H_ */
--
1.7.0.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2011-04-11 21:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-11 21:52 [PATCH 0/3] " franck.jullien
2011-04-11 21:52 ` [PATCH 1/3] Fix coding style in driver/net/Makefile franck.jullien
2011-04-11 21:52 ` franck.jullien [this message]
2011-04-27 19:14 ` [PATCH 2/3] [v3] Nios2: Add Altera TSE driver Franck JULLIEN
2011-04-11 21:52 ` [PATCH 3/3] Add platform data to the mac device franck.jullien
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1302558729-3298-3-git-send-email-franck.jullien@gmail.com \
--to=franck.jullien@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox