From: Hubert Feurstein <h.feurstein@gmail.com>
To: barebox@lists.infradead.org
Subject: [RFC PATCH] atmel-mci: fix initialization of 8bit-bus-width-mode for at91sam9g45
Date: Wed, 22 Jun 2011 00:10:16 +0200 [thread overview]
Message-ID: <1308694216-6221-1-git-send-email-h.feurstein@gmail.com> (raw)
When the bus_width was set to 8, then only one data-line has been initialized.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
---
It seems that nobody tried the 8bit mode yet, because this init-bug is present in the
linux kernel as well.
@Sascha: I assume the mci-host-driver should set both bits (MMC_MODE_4BIT and MMC_MODE_8BIT)
when bus_width == 8 ???
arch/arm/mach-at91/at91sam9g45_devices.c | 4 ++--
drivers/mci/atmel_mci.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index dc01705..a474bd7 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -285,7 +285,7 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
/* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
at91_set_A_periph(AT91_PIN_PA2, 1);
- if (data->bus_width == 4) {
+ if (data->bus_width >= 4) {
at91_set_A_periph(AT91_PIN_PA3, 1);
at91_set_A_periph(AT91_PIN_PA4, 1);
at91_set_A_periph(AT91_PIN_PA5, 1);
@@ -310,7 +310,7 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
/* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
at91_set_A_periph(AT91_PIN_PA23, 1);
- if (data->bus_width == 4) {
+ if (data->bus_width >= 4) {
at91_set_A_periph(AT91_PIN_PA24, 1);
at91_set_A_periph(AT91_PIN_PA25, 1);
at91_set_A_periph(AT91_PIN_PA26, 1);
diff --git a/drivers/mci/atmel_mci.c b/drivers/mci/atmel_mci.c
index 49a7851..d8bcf81 100644
--- a/drivers/mci/atmel_mci.c
+++ b/drivers/mci/atmel_mci.c
@@ -451,9 +451,9 @@ static int mci_probe(struct device_d *hw_dev)
host->mci.init = mci_reset;
host->mci.host_caps = pd->host_caps;
- if (pd->bus_width == 4)
+ if (pd->bus_width >= 4)
host->mci.host_caps |= MMC_MODE_4BIT;
- else if (pd->bus_width == 8)
+ if (pd->bus_width == 8)
host->mci.host_caps |= MMC_MODE_8BIT;
host->base = (void __iomem *)hw_dev->map_base;
--
1.7.4.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2011-06-21 22:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-21 22:10 Hubert Feurstein [this message]
2011-06-21 22:23 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1308694216-6221-1-git-send-email-h.feurstein@gmail.com \
--to=h.feurstein@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox