* [PATCH] serial_ns16550: remove legacy code copied from U-Boot v1
@ 2011-07-16 13:04 Antony Pavlov
2011-07-17 15:42 ` Sascha Hauer
0 siblings, 1 reply; 2+ messages in thread
From: Antony Pavlov @ 2011-07-16 13:04 UTC (permalink / raw)
To: barebox
---
drivers/serial/serial_ns16550.c | 19 -------------------
drivers/serial/serial_ns16550.h | 4 ----
2 files changed, 0 insertions(+), 23 deletions(-)
diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
index ab172e7..9a4b4dc 100644
--- a/drivers/serial/serial_ns16550.c
+++ b/drivers/serial/serial_ns16550.c
@@ -62,26 +62,7 @@ static unsigned int ns16550_calc_divisor(struct console_device *cdev,
struct NS16550_plat *plat = (struct NS16550_plat *)
cdev->dev->platform_data;
unsigned int clk = plat->clock;
-#ifdef CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS
- /* FIXME: Legacy Code copied from U-Boot V1 implementation
- */
-#ifdef CONFIG_ARCH_OMAP1510
- unsigned long base = cdev->dev->map_base;
- /* If can't cleanly clock 115200 set div to 1 */
- if ((clk == 12000000) && (baudrate == 115200)) {
- /* enable 6.5 * divisor */
- plat->reg_write(OSC_12M_SEL, base, osc_12m_sel);
- return 1; /* return 1 for base divisor */
- }
- /* clear if previously set */
- plat->reg_write(0, base, osc_12m_sel);
-#elif defined(CONFIG_ARCH_OMAP1610)
- /* If can't cleanly clock 115200 set div to 1 */
- if ((clk == 48000000) && (baudrate == 115200))
- return 26; /* return 26 for base divisor */
-#endif
-#endif /* End of OMAP specific handling */
return (clk / MODE_X_DIV / baudrate);
}
diff --git a/drivers/serial/serial_ns16550.h b/drivers/serial/serial_ns16550.h
index eb2fd10..db8fe64 100644
--- a/drivers/serial/serial_ns16550.h
+++ b/drivers/serial/serial_ns16550.h
@@ -81,10 +81,6 @@
#define LSR_TEMT 0x40 /* Xmitter empty */
#define LSR_ERR 0x80 /* Error */
-#ifdef CONFIG_ARCH_OMAP1510
-#define OSC_12M_SEL 0x01 /* selects 6.5 * current clk div */
-#endif
-
/* useful defaults for LCR */
#define LCR_8N1 0x03
--
1.7.5.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] serial_ns16550: remove legacy code copied from U-Boot v1
2011-07-16 13:04 [PATCH] serial_ns16550: remove legacy code copied from U-Boot v1 Antony Pavlov
@ 2011-07-17 15:42 ` Sascha Hauer
0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2011-07-17 15:42 UTC (permalink / raw)
To: Antony Pavlov; +Cc: barebox
On Sat, Jul 16, 2011 at 05:04:31PM +0400, Antony Pavlov wrote:
> ---
> drivers/serial/serial_ns16550.c | 19 -------------------
> drivers/serial/serial_ns16550.h | 4 ----
> 2 files changed, 0 insertions(+), 23 deletions(-)
Applied to master.
Sascha
>
> diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
> index ab172e7..9a4b4dc 100644
> --- a/drivers/serial/serial_ns16550.c
> +++ b/drivers/serial/serial_ns16550.c
> @@ -62,26 +62,7 @@ static unsigned int ns16550_calc_divisor(struct console_device *cdev,
> struct NS16550_plat *plat = (struct NS16550_plat *)
> cdev->dev->platform_data;
> unsigned int clk = plat->clock;
> -#ifdef CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS
> - /* FIXME: Legacy Code copied from U-Boot V1 implementation
> - */
> -#ifdef CONFIG_ARCH_OMAP1510
> - unsigned long base = cdev->dev->map_base;
> - /* If can't cleanly clock 115200 set div to 1 */
> - if ((clk == 12000000) && (baudrate == 115200)) {
> - /* enable 6.5 * divisor */
> - plat->reg_write(OSC_12M_SEL, base, osc_12m_sel);
> - return 1; /* return 1 for base divisor */
> - }
> - /* clear if previously set */
> - plat->reg_write(0, base, osc_12m_sel);
> -#elif defined(CONFIG_ARCH_OMAP1610)
> - /* If can't cleanly clock 115200 set div to 1 */
> - if ((clk == 48000000) && (baudrate == 115200))
> - return 26; /* return 26 for base divisor */
> -#endif
>
> -#endif /* End of OMAP specific handling */
> return (clk / MODE_X_DIV / baudrate);
>
> }
> diff --git a/drivers/serial/serial_ns16550.h b/drivers/serial/serial_ns16550.h
> index eb2fd10..db8fe64 100644
> --- a/drivers/serial/serial_ns16550.h
> +++ b/drivers/serial/serial_ns16550.h
> @@ -81,10 +81,6 @@
> #define LSR_TEMT 0x40 /* Xmitter empty */
> #define LSR_ERR 0x80 /* Error */
>
> -#ifdef CONFIG_ARCH_OMAP1510
> -#define OSC_12M_SEL 0x01 /* selects 6.5 * current clk div */
> -#endif
> -
> /* useful defaults for LCR */
> #define LCR_8N1 0x03
>
> --
> 1.7.5.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-07-17 15:42 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-07-16 13:04 [PATCH] serial_ns16550: remove legacy code copied from U-Boot v1 Antony Pavlov
2011-07-17 15:42 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox