From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Subject: [PATCH 03/10] MIPS: import header files
Date: Sun, 24 Jul 2011 23:22:10 +0400 [thread overview]
Message-ID: <1311535336-4534-2-git-send-email-antonynpavlov@gmail.com> (raw)
In-Reply-To: <1311535336-4534-1-git-send-email-antonynpavlov@gmail.com>
from linux-2.6.39:
* arch/mips/include/asm/*
* include/asm-generic/int-ll64.h
from barebox-2011.07.0 arch/x86:
* arch/mips/include/asm/sections.h
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
arch/mips/include/asm/asm.h | 409 +++++++++++++++
arch/mips/include/asm/bitsperlong.h | 8 +
arch/mips/include/asm/byteorder.h | 19 +
arch/mips/include/asm/elf.h | 52 ++
arch/mips/include/asm/io.h | 65 +++
arch/mips/include/asm/mipsregs.h | 988 +++++++++++++++++++++++++++++++++++
arch/mips/include/asm/posix_types.h | 144 +++++
arch/mips/include/asm/regdef.h | 100 ++++
arch/mips/include/asm/sections.h | 1 +
arch/mips/include/asm/sgidefs.h | 44 ++
arch/mips/include/asm/swab.h | 59 ++
arch/mips/include/asm/types.h | 49 ++
include/asm-generic/int-ll64.h | 78 +++
13 files changed, 2016 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/include/asm/asm.h
create mode 100644 arch/mips/include/asm/bitsperlong.h
create mode 100644 arch/mips/include/asm/byteorder.h
create mode 100644 arch/mips/include/asm/elf.h
create mode 100644 arch/mips/include/asm/io.h
create mode 100644 arch/mips/include/asm/mipsregs.h
create mode 100644 arch/mips/include/asm/posix_types.h
create mode 100644 arch/mips/include/asm/regdef.h
create mode 100644 arch/mips/include/asm/sections.h
create mode 100644 arch/mips/include/asm/sgidefs.h
create mode 100644 arch/mips/include/asm/swab.h
create mode 100644 arch/mips/include/asm/types.h
create mode 100644 include/asm-generic/int-ll64.h
diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h
new file mode 100644
index 0000000..608cfcf
--- /dev/null
+++ b/arch/mips/include/asm/asm.h
@@ -0,0 +1,409 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 1997, 1999, 2001 by Ralf Baechle
+ * Copyright (C) 1999 by Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2002 Maciej W. Rozycki
+ *
+ * Some useful macros for MIPS assembler code
+ *
+ * Some of the routines below contain useless nops that will be optimized
+ * away by gas in -O mode. These nops are however required to fill delay
+ * slots in noreorder mode.
+ */
+#ifndef __ASM_ASM_H
+#define __ASM_ASM_H
+
+#include <asm/sgidefs.h>
+
+#ifndef CAT
+#ifdef __STDC__
+#define __CAT(str1, str2) str1##str2
+#else
+#define __CAT(str1, str2) str1/**/str2
+#endif
+#define CAT(str1, str2) __CAT(str1, str2)
+#endif
+
+/*
+ * PIC specific declarations
+ * Not used for the kernel but here seems to be the right place.
+ */
+#ifdef __PIC__
+#define CPRESTORE(register) \
+ .cprestore register
+#define CPADD(register) \
+ .cpadd register
+#define CPLOAD(register) \
+ .cpload register
+#else
+#define CPRESTORE(register)
+#define CPADD(register)
+#define CPLOAD(register)
+#endif
+
+/*
+ * LEAF - declare leaf routine
+ */
+#define LEAF(symbol) \
+ .globl symbol; \
+ .align 2; \
+ .type symbol, @function; \
+ .ent symbol, 0; \
+symbol: .frame sp, 0, ra
+
+/*
+ * NESTED - declare nested routine entry point
+ */
+#define NESTED(symbol, framesize, rpc) \
+ .globl symbol; \
+ .align 2; \
+ .type symbol, @function; \
+ .ent symbol, 0; \
+symbol: .frame sp, framesize, rpc
+
+/*
+ * END - mark end of function
+ */
+#define END(function) \
+ .end function; \
+ .size function, .-function
+
+/*
+ * EXPORT - export definition of symbol
+ */
+#define EXPORT(symbol) \
+ .globl symbol; \
+symbol:
+
+/*
+ * FEXPORT - export definition of a function symbol
+ */
+#define FEXPORT(symbol) \
+ .globl symbol; \
+ .type symbol, @function; \
+symbol:
+
+/*
+ * ABS - export absolute symbol
+ */
+#define ABS(symbol,value) \
+ .globl symbol; \
+symbol = value
+
+#define PANIC(msg) \
+ .set push; \
+ .set reorder; \
+ PTR_LA a0, 8f; \
+ jal panic; \
+9: b 9b; \
+ .set pop; \
+ TEXT(msg)
+
+/*
+ * Print formatted string
+ */
+#ifdef CONFIG_PRINTK
+#define PRINT(string) \
+ .set push; \
+ .set reorder; \
+ PTR_LA a0, 8f; \
+ jal printk; \
+ .set pop; \
+ TEXT(string)
+#else
+#define PRINT(string)
+#endif
+
+#define TEXT(msg) \
+ .pushsection .data; \
+8: .asciiz msg; \
+ .popsection;
+
+/*
+ * Build text tables
+ */
+#define TTABLE(string) \
+ .pushsection .text; \
+ .word 1f; \
+ .popsection \
+ .pushsection .data; \
+1: .asciiz string; \
+ .popsection
+
+/*
+ * MIPS IV pref instruction.
+ * Use with .set noreorder only!
+ *
+ * MIPS IV implementations are free to treat this as a nop. The R5000
+ * is one of them. So we should have an option not to use this instruction.
+ */
+#ifdef CONFIG_CPU_HAS_PREFETCH
+
+#define PREF(hint,addr) \
+ .set push; \
+ .set mips4; \
+ pref hint, addr; \
+ .set pop
+
+#define PREFX(hint,addr) \
+ .set push; \
+ .set mips4; \
+ prefx hint, addr; \
+ .set pop
+
+#else /* !CONFIG_CPU_HAS_PREFETCH */
+
+#define PREF(hint, addr)
+#define PREFX(hint, addr)
+
+#endif /* !CONFIG_CPU_HAS_PREFETCH */
+
+/*
+ * MIPS ISA IV/V movn/movz instructions and equivalents for older CPUs.
+ */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS1)
+#define MOVN(rd, rs, rt) \
+ .set push; \
+ .set reorder; \
+ beqz rt, 9f; \
+ move rd, rs; \
+ .set pop; \
+9:
+#define MOVZ(rd, rs, rt) \
+ .set push; \
+ .set reorder; \
+ bnez rt, 9f; \
+ move rd, rs; \
+ .set pop; \
+9:
+#endif /* _MIPS_ISA == _MIPS_ISA_MIPS1 */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3)
+#define MOVN(rd, rs, rt) \
+ .set push; \
+ .set noreorder; \
+ bnezl rt, 9f; \
+ move rd, rs; \
+ .set pop; \
+9:
+#define MOVZ(rd, rs, rt) \
+ .set push; \
+ .set noreorder; \
+ beqzl rt, 9f; \
+ move rd, rs; \
+ .set pop; \
+9:
+#endif /* (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \
+ (_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64)
+#define MOVN(rd, rs, rt) \
+ movn rd, rs, rt
+#define MOVZ(rd, rs, rt) \
+ movz rd, rs, rt
+#endif /* MIPS IV, MIPS V, MIPS32 or MIPS64 */
+
+/*
+ * Stack alignment
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define ALSZ 7
+#define ALMASK ~7
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define ALSZ 15
+#define ALMASK ~15
+#endif
+
+/*
+ * Macros to handle different pointer/register sizes for 32/64-bit code
+ */
+
+/*
+ * Size of a register
+ */
+#ifdef __mips64
+#define SZREG 8
+#else
+#define SZREG 4
+#endif
+
+/*
+ * Use the following macros in assemblercode to load/store registers,
+ * pointers etc.
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define REG_S sw
+#define REG_L lw
+#define REG_SUBU subu
+#define REG_ADDU addu
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define REG_S sd
+#define REG_L ld
+#define REG_SUBU dsubu
+#define REG_ADDU daddu
+#endif
+
+/*
+ * How to add/sub/load/store/shift C int variables.
+ */
+#if (_MIPS_SZINT == 32)
+#define INT_ADD add
+#define INT_ADDU addu
+#define INT_ADDI addi
+#define INT_ADDIU addiu
+#define INT_SUB sub
+#define INT_SUBU subu
+#define INT_L lw
+#define INT_S sw
+#define INT_SLL sll
+#define INT_SLLV sllv
+#define INT_SRL srl
+#define INT_SRLV srlv
+#define INT_SRA sra
+#define INT_SRAV srav
+#endif
+
+#if (_MIPS_SZINT == 64)
+#define INT_ADD dadd
+#define INT_ADDU daddu
+#define INT_ADDI daddi
+#define INT_ADDIU daddiu
+#define INT_SUB dsub
+#define INT_SUBU dsubu
+#define INT_L ld
+#define INT_S sd
+#define INT_SLL dsll
+#define INT_SLLV dsllv
+#define INT_SRL dsrl
+#define INT_SRLV dsrlv
+#define INT_SRA dsra
+#define INT_SRAV dsrav
+#endif
+
+/*
+ * How to add/sub/load/store/shift C long variables.
+ */
+#if (_MIPS_SZLONG == 32)
+#define LONG_ADD add
+#define LONG_ADDU addu
+#define LONG_ADDI addi
+#define LONG_ADDIU addiu
+#define LONG_SUB sub
+#define LONG_SUBU subu
+#define LONG_L lw
+#define LONG_S sw
+#define LONG_SLL sll
+#define LONG_SLLV sllv
+#define LONG_SRL srl
+#define LONG_SRLV srlv
+#define LONG_SRA sra
+#define LONG_SRAV srav
+
+#define LONG .word
+#define LONGSIZE 4
+#define LONGMASK 3
+#define LONGLOG 2
+#endif
+
+#if (_MIPS_SZLONG == 64)
+#define LONG_ADD dadd
+#define LONG_ADDU daddu
+#define LONG_ADDI daddi
+#define LONG_ADDIU daddiu
+#define LONG_SUB dsub
+#define LONG_SUBU dsubu
+#define LONG_L ld
+#define LONG_S sd
+#define LONG_SLL dsll
+#define LONG_SLLV dsllv
+#define LONG_SRL dsrl
+#define LONG_SRLV dsrlv
+#define LONG_SRA dsra
+#define LONG_SRAV dsrav
+
+#define LONG .dword
+#define LONGSIZE 8
+#define LONGMASK 7
+#define LONGLOG 3
+#endif
+
+/*
+ * How to add/sub/load/store/shift pointers.
+ */
+#if (_MIPS_SZPTR == 32)
+#define PTR_ADD add
+#define PTR_ADDU addu
+#define PTR_ADDI addi
+#define PTR_ADDIU addiu
+#define PTR_SUB sub
+#define PTR_SUBU subu
+#define PTR_L lw
+#define PTR_S sw
+#define PTR_LA la
+#define PTR_LI li
+#define PTR_SLL sll
+#define PTR_SLLV sllv
+#define PTR_SRL srl
+#define PTR_SRLV srlv
+#define PTR_SRA sra
+#define PTR_SRAV srav
+
+#define PTR_SCALESHIFT 2
+
+#define PTR .word
+#define PTRSIZE 4
+#define PTRLOG 2
+#endif
+
+#if (_MIPS_SZPTR == 64)
+#define PTR_ADD dadd
+#define PTR_ADDU daddu
+#define PTR_ADDI daddi
+#define PTR_ADDIU daddiu
+#define PTR_SUB dsub
+#define PTR_SUBU dsubu
+#define PTR_L ld
+#define PTR_S sd
+#define PTR_LA dla
+#define PTR_LI dli
+#define PTR_SLL dsll
+#define PTR_SLLV dsllv
+#define PTR_SRL dsrl
+#define PTR_SRLV dsrlv
+#define PTR_SRA dsra
+#define PTR_SRAV dsrav
+
+#define PTR_SCALESHIFT 3
+
+#define PTR .dword
+#define PTRSIZE 8
+#define PTRLOG 3
+#endif
+
+/*
+ * Some cp0 registers were extended to 64bit for MIPS III.
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define MFC0 mfc0
+#define MTC0 mtc0
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define MFC0 dmfc0
+#define MTC0 dmtc0
+#endif
+
+#define SSNOP sll zero, zero, 1
+
+#ifdef CONFIG_SGI_IP28
+/* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */
+#include <asm/cacheops.h>
+#define R10KCBARRIER(addr) cache Cache_Barrier, addr;
+#else
+#define R10KCBARRIER(addr)
+#endif
+
+#endif /* __ASM_ASM_H */
diff --git a/arch/mips/include/asm/bitsperlong.h b/arch/mips/include/asm/bitsperlong.h
new file mode 100644
index 0000000..3e4c10a
--- /dev/null
+++ b/arch/mips/include/asm/bitsperlong.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MIPS_BITSPERLONG_H
+#define __ASM_MIPS_BITSPERLONG_H
+
+#define __BITS_PER_LONG _MIPS_SZLONG
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* __ASM_MIPS_BITSPERLONG_H */
diff --git a/arch/mips/include/asm/byteorder.h b/arch/mips/include/asm/byteorder.h
new file mode 100644
index 0000000..9579051
--- /dev/null
+++ b/arch/mips/include/asm/byteorder.h
@@ -0,0 +1,19 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 99, 2003 by Ralf Baechle
+ */
+#ifndef _ASM_BYTEORDER_H
+#define _ASM_BYTEORDER_H
+
+#if defined(__MIPSEB__)
+#include <linux/byteorder/big_endian.h>
+#elif defined(__MIPSEL__)
+#include <linux/byteorder/little_endian.h>
+#else
+# error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
+#endif
+
+#endif /* _ASM_BYTEORDER_H */
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
new file mode 100644
index 0000000..b8b8219
--- /dev/null
+++ b/arch/mips/include/asm/elf.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Much of this is taken from binutils and GNU libc ...
+ */
+
+/**
+ * @file
+ * @brief mips specific elf information
+ *
+ */
+
+#ifndef _ASM_MIPS_ELF_H
+#define _ASM_MIPS_ELF_H
+
+#ifndef ELF_ARCH
+
+#ifdef CONFIG_32BIT
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(hdr) \
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+
+#endif /* CONFIG_32BIT */
+
+#ifdef CONFIG_64BIT
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS64
+
+#endif /* CONFIG_64BIT */
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#ifdef __MIPSEB__
+#define ELF_DATA ELFDATA2MSB
+#elif defined(__MIPSEL__)
+#define ELF_DATA ELFDATA2LSB
+#endif
+#define ELF_ARCH EM_MIPS
+
+#endif /* !defined(ELF_ARCH) */
+#endif /* _ASM_MIPS_ELF_H */
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
new file mode 100644
index 0000000..97ea231
--- /dev/null
+++ b/arch/mips/include/asm/io.h
@@ -0,0 +1,65 @@
+/*
+ * Stolen from the linux-2.6/include/asm-generic/io.h
+ */
+
+/**
+ * @file
+ * @brief mips IO access functions
+ */
+
+#ifndef __ASM_MIPS_IO_H
+#define __ASM_MIPS_IO_H
+
+#include <linux/compiler.h>
+#include <asm/types.h>
+
+/*****************************************************************************/
+/*
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the simple architectures, we just read/write the
+ * memory location directly.
+ */
+#ifndef __raw_readb
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+ return *(const volatile u8 __force *) addr;
+}
+#endif
+
+#ifndef __raw_readw
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+ return *(const volatile u16 __force *) addr;
+}
+#endif
+
+#ifndef __raw_readl
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+ return *(const volatile u32 __force *) addr;
+}
+#endif
+
+#ifndef __raw_writeb
+static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
+{
+ *(volatile u8 __force *) addr = b;
+}
+#endif
+
+#ifndef __raw_writew
+static inline void __raw_writew(u16 b, volatile void __iomem *addr)
+{
+ *(volatile u16 __force *) addr = b;
+}
+#endif
+
+#ifndef __raw_writel
+static inline void __raw_writel(u32 b, volatile void __iomem *addr)
+{
+ *(volatile u32 __force *) addr = b;
+}
+#endif
+
+#endif /* __ASM_MIPS_IO_H */
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
new file mode 100644
index 0000000..f3d1ae2
--- /dev/null
+++ b/arch/mips/include/asm/mipsregs.h
@@ -0,0 +1,988 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ * Modified for further R[236]000 support by Paul M. Antoine, 1996.
+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000, 07 MIPS Technologies, Inc.
+ * Copyright (C) 2003, 2004 Maciej W. Rozycki
+ */
+#ifndef _ASM_MIPSREGS_H
+#define _ASM_MIPSREGS_H
+
+/*
+ * The following macros are especially useful for __asm__
+ * inline assembler.
+ */
+#ifndef __STR
+#define __STR(x) #x
+#endif
+#ifndef STR
+#define STR(x) __STR(x)
+#endif
+
+/*
+ * Configure language
+ */
+#ifdef __ASSEMBLY__
+#define _ULCAST_
+#else
+#define _ULCAST_ (unsigned long)
+#endif
+
+/*
+ * Coprocessor 0 register names
+ */
+#define CP0_INDEX $0
+#define CP0_RANDOM $1
+#define CP0_ENTRYLO0 $2
+#define CP0_ENTRYLO1 $3
+#define CP0_CONF $3
+#define CP0_CONTEXT $4
+#define CP0_PAGEMASK $5
+#define CP0_WIRED $6
+#define CP0_INFO $7
+#define CP0_BADVADDR $8
+#define CP0_COUNT $9
+#define CP0_ENTRYHI $10
+#define CP0_COMPARE $11
+#define CP0_STATUS $12
+#define CP0_CAUSE $13
+#define CP0_EPC $14
+#define CP0_PRID $15
+#define CP0_CONFIG $16
+#define CP0_LLADDR $17
+#define CP0_WATCHLO $18
+#define CP0_WATCHHI $19
+#define CP0_XCONTEXT $20
+#define CP0_FRAMEMASK $21
+#define CP0_DIAGNOSTIC $22
+#define CP0_DEBUG $23
+#define CP0_DEPC $24
+#define CP0_PERFORMANCE $25
+#define CP0_ECC $26
+#define CP0_CACHEERR $27
+#define CP0_TAGLO $28
+#define CP0_TAGHI $29
+#define CP0_ERROREPC $30
+#define CP0_DESAVE $31
+
+/*
+ * R4640/R4650 cp0 register names. These registers are listed
+ * here only for completeness; without MMU these CPUs are not useable
+ * by Linux. A future ELKS port might take make Linux run on them
+ * though ...
+ */
+#define CP0_IBASE $0
+#define CP0_IBOUND $1
+#define CP0_DBASE $2
+#define CP0_DBOUND $3
+#define CP0_CALG $17
+#define CP0_IWATCH $18
+#define CP0_DWATCH $19
+
+/*
+ * Coprocessor 0 Set 1 register names
+ */
+#define CP0_S1_DERRADDR0 $26
+#define CP0_S1_DERRADDR1 $27
+#define CP0_S1_INTCONTROL $20
+
+/*
+ * Coprocessor 0 Set 2 register names
+ */
+#define CP0_S2_SRSCTL $12 /* MIPSR2 */
+
+/*
+ * Coprocessor 0 Set 3 register names
+ */
+#define CP0_S3_SRSMAP $12 /* MIPSR2 */
+
+/*
+ * TX39 Series
+ */
+#define CP0_TX39_CACHE $7
+
+/*
+ * Coprocessor 1 (FPU) register names
+ */
+#define CP1_REVISION $0
+#define CP1_STATUS $31
+
+/*
+ * FPU Status Register Values
+ */
+/*
+ * Status Register Values
+ */
+
+#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */
+#define FPU_CSR_COND 0x00800000 /* $fcc0 */
+#define FPU_CSR_COND0 0x00800000 /* $fcc0 */
+#define FPU_CSR_COND1 0x02000000 /* $fcc1 */
+#define FPU_CSR_COND2 0x04000000 /* $fcc2 */
+#define FPU_CSR_COND3 0x08000000 /* $fcc3 */
+#define FPU_CSR_COND4 0x10000000 /* $fcc4 */
+#define FPU_CSR_COND5 0x20000000 /* $fcc5 */
+#define FPU_CSR_COND6 0x40000000 /* $fcc6 */
+#define FPU_CSR_COND7 0x80000000 /* $fcc7 */
+
+/*
+ * Bits 18 - 20 of the FPU Status Register will be read as 0,
+ * and should be written as zero.
+ */
+#define FPU_CSR_RSVD 0x001c0000
+
+/*
+ * X the exception cause indicator
+ * E the exception enable
+ * S the sticky/flag bit
+*/
+#define FPU_CSR_ALL_X 0x0003f000
+#define FPU_CSR_UNI_X 0x00020000
+#define FPU_CSR_INV_X 0x00010000
+#define FPU_CSR_DIV_X 0x00008000
+#define FPU_CSR_OVF_X 0x00004000
+#define FPU_CSR_UDF_X 0x00002000
+#define FPU_CSR_INE_X 0x00001000
+
+#define FPU_CSR_ALL_E 0x00000f80
+#define FPU_CSR_INV_E 0x00000800
+#define FPU_CSR_DIV_E 0x00000400
+#define FPU_CSR_OVF_E 0x00000200
+#define FPU_CSR_UDF_E 0x00000100
+#define FPU_CSR_INE_E 0x00000080
+
+#define FPU_CSR_ALL_S 0x0000007c
+#define FPU_CSR_INV_S 0x00000040
+#define FPU_CSR_DIV_S 0x00000020
+#define FPU_CSR_OVF_S 0x00000010
+#define FPU_CSR_UDF_S 0x00000008
+#define FPU_CSR_INE_S 0x00000004
+
+/* Bits 0 and 1 of FPU Status Register specify the rounding mode */
+#define FPU_CSR_RM 0x00000003
+#define FPU_CSR_RN 0x0 /* nearest */
+#define FPU_CSR_RZ 0x1 /* towards zero */
+#define FPU_CSR_RU 0x2 /* towards +Infinity */
+#define FPU_CSR_RD 0x3 /* towards -Infinity */
+
+/*
+ * Values for PageMask register
+ */
+#ifdef CONFIG_CPU_VR41XX
+
+/* Why doesn't stupidity hurt ... */
+
+#define PM_1K 0x00000000
+#define PM_4K 0x00001800
+#define PM_16K 0x00007800
+#define PM_64K 0x0001f800
+#define PM_256K 0x0007f800
+
+#else
+
+#define PM_4K 0x00000000
+#define PM_8K 0x00002000
+#define PM_16K 0x00006000
+#define PM_32K 0x0000e000
+#define PM_64K 0x0001e000
+#define PM_128K 0x0003e000
+#define PM_256K 0x0007e000
+#define PM_512K 0x000fe000
+#define PM_1M 0x001fe000
+#define PM_2M 0x003fe000
+#define PM_4M 0x007fe000
+#define PM_8M 0x00ffe000
+#define PM_16M 0x01ffe000
+#define PM_32M 0x03ffe000
+#define PM_64M 0x07ffe000
+#define PM_256M 0x1fffe000
+#define PM_1G 0x7fffe000
+
+#endif
+
+/*
+ * Bitfields in the R4xx0 cp0 status register
+ */
+#define ST0_IE 0x00000001
+#define ST0_EXL 0x00000002
+#define ST0_ERL 0x00000004
+#define ST0_KSU 0x00000018
+# define KSU_USER 0x00000010
+# define KSU_SUPERVISOR 0x00000008
+# define KSU_KERNEL 0x00000000
+#define ST0_UX 0x00000020
+#define ST0_SX 0x00000040
+#define ST0_KX 0x00000080
+#define ST0_DE 0x00010000
+#define ST0_CE 0x00020000
+
+/*
+ * Setting c0_status.co enables Hit_Writeback and Hit_Writeback_Invalidate
+ * cacheops in userspace. This bit exists only on RM7000 and RM9000
+ * processors.
+ */
+#define ST0_CO 0x08000000
+
+/*
+ * Bitfields in the R[23]000 cp0 status register.
+ */
+#define ST0_IEC 0x00000001
+#define ST0_KUC 0x00000002
+#define ST0_IEP 0x00000004
+#define ST0_KUP 0x00000008
+#define ST0_IEO 0x00000010
+#define ST0_KUO 0x00000020
+/* bits 6 & 7 are reserved on R[23]000 */
+#define ST0_ISC 0x00010000
+#define ST0_SWC 0x00020000
+#define ST0_CM 0x00080000
+
+/*
+ * Bits specific to the R4640/R4650
+ */
+#define ST0_UM (_ULCAST_(1) << 4)
+#define ST0_IL (_ULCAST_(1) << 23)
+#define ST0_DL (_ULCAST_(1) << 24)
+
+/*
+ * Enable the MIPS MDMX and DSP ASEs
+ */
+#define ST0_MX 0x01000000
+
+/*
+ * Bitfields in the TX39 family CP0 Configuration Register 3
+ */
+#define TX39_CONF_ICS_SHIFT 19
+#define TX39_CONF_ICS_MASK 0x00380000
+#define TX39_CONF_ICS_1KB 0x00000000
+#define TX39_CONF_ICS_2KB 0x00080000
+#define TX39_CONF_ICS_4KB 0x00100000
+#define TX39_CONF_ICS_8KB 0x00180000
+#define TX39_CONF_ICS_16KB 0x00200000
+
+#define TX39_CONF_DCS_SHIFT 16
+#define TX39_CONF_DCS_MASK 0x00070000
+#define TX39_CONF_DCS_1KB 0x00000000
+#define TX39_CONF_DCS_2KB 0x00010000
+#define TX39_CONF_DCS_4KB 0x00020000
+#define TX39_CONF_DCS_8KB 0x00030000
+#define TX39_CONF_DCS_16KB 0x00040000
+
+#define TX39_CONF_CWFON 0x00004000
+#define TX39_CONF_WBON 0x00002000
+#define TX39_CONF_RF_SHIFT 10
+#define TX39_CONF_RF_MASK 0x00000c00
+#define TX39_CONF_DOZE 0x00000200
+#define TX39_CONF_HALT 0x00000100
+#define TX39_CONF_LOCK 0x00000080
+#define TX39_CONF_ICE 0x00000020
+#define TX39_CONF_DCE 0x00000010
+#define TX39_CONF_IRSIZE_SHIFT 2
+#define TX39_CONF_IRSIZE_MASK 0x0000000c
+#define TX39_CONF_DRSIZE_SHIFT 0
+#define TX39_CONF_DRSIZE_MASK 0x00000003
+
+/*
+ * Status register bits available in all MIPS CPUs.
+ */
+#define ST0_IM 0x0000ff00
+#define STATUSB_IP0 8
+#define STATUSF_IP0 (_ULCAST_(1) << 8)
+#define STATUSB_IP1 9
+#define STATUSF_IP1 (_ULCAST_(1) << 9)
+#define STATUSB_IP2 10
+#define STATUSF_IP2 (_ULCAST_(1) << 10)
+#define STATUSB_IP3 11
+#define STATUSF_IP3 (_ULCAST_(1) << 11)
+#define STATUSB_IP4 12
+#define STATUSF_IP4 (_ULCAST_(1) << 12)
+#define STATUSB_IP5 13
+#define STATUSF_IP5 (_ULCAST_(1) << 13)
+#define STATUSB_IP6 14
+#define STATUSF_IP6 (_ULCAST_(1) << 14)
+#define STATUSB_IP7 15
+#define STATUSF_IP7 (_ULCAST_(1) << 15)
+#define STATUSB_IP8 0
+#define STATUSF_IP8 (_ULCAST_(1) << 0)
+#define STATUSB_IP9 1
+#define STATUSF_IP9 (_ULCAST_(1) << 1)
+#define STATUSB_IP10 2
+#define STATUSF_IP10 (_ULCAST_(1) << 2)
+#define STATUSB_IP11 3
+#define STATUSF_IP11 (_ULCAST_(1) << 3)
+#define STATUSB_IP12 4
+#define STATUSF_IP12 (_ULCAST_(1) << 4)
+#define STATUSB_IP13 5
+#define STATUSF_IP13 (_ULCAST_(1) << 5)
+#define STATUSB_IP14 6
+#define STATUSF_IP14 (_ULCAST_(1) << 6)
+#define STATUSB_IP15 7
+#define STATUSF_IP15 (_ULCAST_(1) << 7)
+#define ST0_CH 0x00040000
+#define ST0_NMI 0x00080000
+#define ST0_SR 0x00100000
+#define ST0_TS 0x00200000
+#define ST0_BEV 0x00400000
+#define ST0_RE 0x02000000
+#define ST0_FR 0x04000000
+#define ST0_CU 0xf0000000
+#define ST0_CU0 0x10000000
+#define ST0_CU1 0x20000000
+#define ST0_CU2 0x40000000
+#define ST0_CU3 0x80000000
+#define ST0_XX 0x80000000 /* MIPS IV naming */
+
+/*
+ * Bitfields and bit numbers in the coprocessor 0 IntCtl register. (MIPSR2)
+ *
+ * Refer to your MIPS R4xx0 manual, chapter 5 for explanation.
+ */
+#define INTCTLB_IPPCI 26
+#define INTCTLF_IPPCI (_ULCAST_(7) << INTCTLB_IPPCI)
+#define INTCTLB_IPTI 29
+#define INTCTLF_IPTI (_ULCAST_(7) << INTCTLB_IPTI)
+
+/*
+ * Bitfields and bit numbers in the coprocessor 0 cause register.
+ *
+ * Refer to your MIPS R4xx0 manual, chapter 5 for explanation.
+ */
+#define CAUSEB_EXCCODE 2
+#define CAUSEF_EXCCODE (_ULCAST_(31) << 2)
+#define CAUSEB_IP 8
+#define CAUSEF_IP (_ULCAST_(255) << 8)
+#define CAUSEB_IP0 8
+#define CAUSEF_IP0 (_ULCAST_(1) << 8)
+#define CAUSEB_IP1 9
+#define CAUSEF_IP1 (_ULCAST_(1) << 9)
+#define CAUSEB_IP2 10
+#define CAUSEF_IP2 (_ULCAST_(1) << 10)
+#define CAUSEB_IP3 11
+#define CAUSEF_IP3 (_ULCAST_(1) << 11)
+#define CAUSEB_IP4 12
+#define CAUSEF_IP4 (_ULCAST_(1) << 12)
+#define CAUSEB_IP5 13
+#define CAUSEF_IP5 (_ULCAST_(1) << 13)
+#define CAUSEB_IP6 14
+#define CAUSEF_IP6 (_ULCAST_(1) << 14)
+#define CAUSEB_IP7 15
+#define CAUSEF_IP7 (_ULCAST_(1) << 15)
+#define CAUSEB_IV 23
+#define CAUSEF_IV (_ULCAST_(1) << 23)
+#define CAUSEB_CE 28
+#define CAUSEF_CE (_ULCAST_(3) << 28)
+#define CAUSEB_TI 30
+#define CAUSEF_TI (_ULCAST_(1) << 30)
+#define CAUSEB_BD 31
+#define CAUSEF_BD (_ULCAST_(1) << 31)
+
+/*
+ * Bits in the coprocessor 0 config register.
+ */
+/* Generic bits. */
+#define CONF_CM_CACHABLE_NO_WA 0
+#define CONF_CM_CACHABLE_WA 1
+#define CONF_CM_UNCACHED 2
+#define CONF_CM_CACHABLE_NONCOHERENT 3
+#define CONF_CM_CACHABLE_CE 4
+#define CONF_CM_CACHABLE_COW 5
+#define CONF_CM_CACHABLE_CUW 6
+#define CONF_CM_CACHABLE_ACCELERATED 7
+#define CONF_CM_CMASK 7
+#define CONF_BE (_ULCAST_(1) << 15)
+
+/* Bits common to various processors. */
+#define CONF_CU (_ULCAST_(1) << 3)
+#define CONF_DB (_ULCAST_(1) << 4)
+#define CONF_IB (_ULCAST_(1) << 5)
+#define CONF_DC (_ULCAST_(7) << 6)
+#define CONF_IC (_ULCAST_(7) << 9)
+#define CONF_EB (_ULCAST_(1) << 13)
+#define CONF_EM (_ULCAST_(1) << 14)
+#define CONF_SM (_ULCAST_(1) << 16)
+#define CONF_SC (_ULCAST_(1) << 17)
+#define CONF_EW (_ULCAST_(3) << 18)
+#define CONF_EP (_ULCAST_(15)<< 24)
+#define CONF_EC (_ULCAST_(7) << 28)
+#define CONF_CM (_ULCAST_(1) << 31)
+
+/* Bits specific to the R4xx0. */
+#define R4K_CONF_SW (_ULCAST_(1) << 20)
+#define R4K_CONF_SS (_ULCAST_(1) << 21)
+#define R4K_CONF_SB (_ULCAST_(3) << 22)
+
+/* Bits specific to the R5000. */
+#define R5K_CONF_SE (_ULCAST_(1) << 12)
+#define R5K_CONF_SS (_ULCAST_(3) << 20)
+
+/* Bits specific to the RM7000. */
+#define RM7K_CONF_SE (_ULCAST_(1) << 3)
+#define RM7K_CONF_TE (_ULCAST_(1) << 12)
+#define RM7K_CONF_CLK (_ULCAST_(1) << 16)
+#define RM7K_CONF_TC (_ULCAST_(1) << 17)
+#define RM7K_CONF_SI (_ULCAST_(3) << 20)
+#define RM7K_CONF_SC (_ULCAST_(1) << 31)
+
+/* Bits specific to the R10000. */
+#define R10K_CONF_DN (_ULCAST_(3) << 3)
+#define R10K_CONF_CT (_ULCAST_(1) << 5)
+#define R10K_CONF_PE (_ULCAST_(1) << 6)
+#define R10K_CONF_PM (_ULCAST_(3) << 7)
+#define R10K_CONF_EC (_ULCAST_(15)<< 9)
+#define R10K_CONF_SB (_ULCAST_(1) << 13)
+#define R10K_CONF_SK (_ULCAST_(1) << 14)
+#define R10K_CONF_SS (_ULCAST_(7) << 16)
+#define R10K_CONF_SC (_ULCAST_(7) << 19)
+#define R10K_CONF_DC (_ULCAST_(7) << 26)
+#define R10K_CONF_IC (_ULCAST_(7) << 29)
+
+/* Bits specific to the VR41xx. */
+#define VR41_CONF_CS (_ULCAST_(1) << 12)
+#define VR41_CONF_P4K (_ULCAST_(1) << 13)
+#define VR41_CONF_BP (_ULCAST_(1) << 16)
+#define VR41_CONF_M16 (_ULCAST_(1) << 20)
+#define VR41_CONF_AD (_ULCAST_(1) << 23)
+
+/* Bits specific to the R30xx. */
+#define R30XX_CONF_FDM (_ULCAST_(1) << 19)
+#define R30XX_CONF_REV (_ULCAST_(1) << 22)
+#define R30XX_CONF_AC (_ULCAST_(1) << 23)
+#define R30XX_CONF_RF (_ULCAST_(1) << 24)
+#define R30XX_CONF_HALT (_ULCAST_(1) << 25)
+#define R30XX_CONF_FPINT (_ULCAST_(7) << 26)
+#define R30XX_CONF_DBR (_ULCAST_(1) << 29)
+#define R30XX_CONF_SB (_ULCAST_(1) << 30)
+#define R30XX_CONF_LOCK (_ULCAST_(1) << 31)
+
+/* Bits specific to the TX49. */
+#define TX49_CONF_DC (_ULCAST_(1) << 16)
+#define TX49_CONF_IC (_ULCAST_(1) << 17) /* conflict with CONF_SC */
+#define TX49_CONF_HALT (_ULCAST_(1) << 18)
+#define TX49_CONF_CWFON (_ULCAST_(1) << 27)
+
+/* Bits specific to the MIPS32/64 PRA. */
+#define MIPS_CONF_MT (_ULCAST_(7) << 7)
+#define MIPS_CONF_AR (_ULCAST_(7) << 10)
+#define MIPS_CONF_AT (_ULCAST_(3) << 13)
+#define MIPS_CONF_M (_ULCAST_(1) << 31)
+
+/*
+ * Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above.
+ */
+#define MIPS_CONF1_FP (_ULCAST_(1) << 0)
+#define MIPS_CONF1_EP (_ULCAST_(1) << 1)
+#define MIPS_CONF1_CA (_ULCAST_(1) << 2)
+#define MIPS_CONF1_WR (_ULCAST_(1) << 3)
+#define MIPS_CONF1_PC (_ULCAST_(1) << 4)
+#define MIPS_CONF1_MD (_ULCAST_(1) << 5)
+#define MIPS_CONF1_C2 (_ULCAST_(1) << 6)
+#define MIPS_CONF1_DA (_ULCAST_(7) << 7)
+#define MIPS_CONF1_DL (_ULCAST_(7) << 10)
+#define MIPS_CONF1_DS (_ULCAST_(7) << 13)
+#define MIPS_CONF1_IA (_ULCAST_(7) << 16)
+#define MIPS_CONF1_IL (_ULCAST_(7) << 19)
+#define MIPS_CONF1_IS (_ULCAST_(7) << 22)
+#define MIPS_CONF1_TLBS (_ULCAST_(63)<< 25)
+
+#define MIPS_CONF2_SA (_ULCAST_(15)<< 0)
+#define MIPS_CONF2_SL (_ULCAST_(15)<< 4)
+#define MIPS_CONF2_SS (_ULCAST_(15)<< 8)
+#define MIPS_CONF2_SU (_ULCAST_(15)<< 12)
+#define MIPS_CONF2_TA (_ULCAST_(15)<< 16)
+#define MIPS_CONF2_TL (_ULCAST_(15)<< 20)
+#define MIPS_CONF2_TS (_ULCAST_(15)<< 24)
+#define MIPS_CONF2_TU (_ULCAST_(7) << 28)
+
+#define MIPS_CONF3_TL (_ULCAST_(1) << 0)
+#define MIPS_CONF3_SM (_ULCAST_(1) << 1)
+#define MIPS_CONF3_MT (_ULCAST_(1) << 2)
+#define MIPS_CONF3_SP (_ULCAST_(1) << 4)
+#define MIPS_CONF3_VINT (_ULCAST_(1) << 5)
+#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6)
+#define MIPS_CONF3_LPA (_ULCAST_(1) << 7)
+#define MIPS_CONF3_DSP (_ULCAST_(1) << 10)
+#define MIPS_CONF3_ULRI (_ULCAST_(1) << 13)
+
+#define MIPS_CONF4_MMUSIZEEXT (_ULCAST_(255) << 0)
+#define MIPS_CONF4_MMUEXTDEF (_ULCAST_(3) << 14)
+#define MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT (_ULCAST_(1) << 14)
+
+#define MIPS_CONF7_WII (_ULCAST_(1) << 31)
+
+#define MIPS_CONF7_RPS (_ULCAST_(1) << 2)
+
+
+/*
+ * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register.
+ */
+#define MIPS_FPIR_S (_ULCAST_(1) << 16)
+#define MIPS_FPIR_D (_ULCAST_(1) << 17)
+#define MIPS_FPIR_PS (_ULCAST_(1) << 18)
+#define MIPS_FPIR_3D (_ULCAST_(1) << 19)
+#define MIPS_FPIR_W (_ULCAST_(1) << 20)
+#define MIPS_FPIR_L (_ULCAST_(1) << 21)
+#define MIPS_FPIR_F64 (_ULCAST_(1) << 22)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Macros to access the system control coprocessor
+ */
+
+#define __read_32bit_c0_register(source, sel) \
+({ int __res; \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ "mfc0\t%0, " #source "\n\t" \
+ : "=r" (__res)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips32\n\t" \
+ "mfc0\t%0, " #source ", " #sel "\n\t" \
+ ".set\tmips0\n\t" \
+ : "=r" (__res)); \
+ __res; \
+})
+
+#define __read_64bit_c0_register(source, sel) \
+({ unsigned long long __res; \
+ if (sizeof(unsigned long) == 4) \
+ __res = __read_64bit_c0_split(source, sel); \
+ else if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips3\n\t" \
+ "dmfc0\t%0, " #source "\n\t" \
+ ".set\tmips0" \
+ : "=r" (__res)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmfc0\t%0, " #source ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : "=r" (__res)); \
+ __res; \
+})
+
+#define __write_32bit_c0_register(register, sel, value) \
+do { \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ "mtc0\t%z0, " #register "\n\t" \
+ : : "Jr" ((unsigned int)(value))); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips32\n\t" \
+ "mtc0\t%z0, " #register ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : : "Jr" ((unsigned int)(value))); \
+} while (0)
+
+#define __write_64bit_c0_register(register, sel, value) \
+do { \
+ if (sizeof(unsigned long) == 4) \
+ __write_64bit_c0_split(register, sel, value); \
+ else if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips3\n\t" \
+ "dmtc0\t%z0, " #register "\n\t" \
+ ".set\tmips0" \
+ : : "Jr" (value)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmtc0\t%z0, " #register ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : : "Jr" (value)); \
+} while (0)
+
+#define __read_ulong_c0_register(reg, sel) \
+ ((sizeof(unsigned long) == 4) ? \
+ (unsigned long) __read_32bit_c0_register(reg, sel) : \
+ (unsigned long) __read_64bit_c0_register(reg, sel))
+
+#define __write_ulong_c0_register(reg, sel, val) \
+do { \
+ if (sizeof(unsigned long) == 4) \
+ __write_32bit_c0_register(reg, sel, val); \
+ else \
+ __write_64bit_c0_register(reg, sel, val); \
+} while (0)
+
+/*
+ * On RM7000/RM9000 these are uses to access cop0 set 1 registers
+ */
+#define __read_32bit_c0_ctrl_register(source) \
+({ int __res; \
+ __asm__ __volatile__( \
+ "cfc0\t%0, " #source "\n\t" \
+ : "=r" (__res)); \
+ __res; \
+})
+
+#define __write_32bit_c0_ctrl_register(register, value) \
+do { \
+ __asm__ __volatile__( \
+ "ctc0\t%z0, " #register "\n\t" \
+ : : "Jr" ((unsigned int)(value))); \
+} while (0)
+
+/*
+ * These versions are only needed for systems with more than 38 bits of
+ * physical address space running the 32-bit kernel. That's none atm :-)
+ */
+#define __read_64bit_c0_split(source, sel) \
+({ \
+ unsigned long long __val; \
+ unsigned long __flags; \
+ \
+ local_irq_save(__flags); \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmfc0\t%M0, " #source "\n\t" \
+ "dsll\t%L0, %M0, 32\n\t" \
+ "dsra\t%M0, %M0, 32\n\t" \
+ "dsra\t%L0, %L0, 32\n\t" \
+ ".set\tmips0" \
+ : "=r" (__val)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmfc0\t%M0, " #source ", " #sel "\n\t" \
+ "dsll\t%L0, %M0, 32\n\t" \
+ "dsra\t%M0, %M0, 32\n\t" \
+ "dsra\t%L0, %L0, 32\n\t" \
+ ".set\tmips0" \
+ : "=r" (__val)); \
+ local_irq_restore(__flags); \
+ \
+ __val; \
+})
+
+#define __write_64bit_c0_split(source, sel, val) \
+do { \
+ unsigned long __flags; \
+ \
+ local_irq_save(__flags); \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dsll\t%L0, %L0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ "dsll\t%M0, %M0, 32\n\t" \
+ "or\t%L0, %L0, %M0\n\t" \
+ "dmtc0\t%L0, " #source "\n\t" \
+ ".set\tmips0" \
+ : : "r" (val)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dsll\t%L0, %L0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ "dsll\t%M0, %M0, 32\n\t" \
+ "or\t%L0, %L0, %M0\n\t" \
+ "dmtc0\t%L0, " #source ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : : "r" (val)); \
+ local_irq_restore(__flags); \
+} while (0)
+
+#define read_c0_index() __read_32bit_c0_register($0, 0)
+#define write_c0_index(val) __write_32bit_c0_register($0, 0, val)
+
+#define read_c0_random() __read_32bit_c0_register($1, 0)
+#define write_c0_random(val) __write_32bit_c0_register($1, 0, val)
+
+#define read_c0_entrylo0() __read_ulong_c0_register($2, 0)
+#define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val)
+
+#define read_c0_entrylo1() __read_ulong_c0_register($3, 0)
+#define write_c0_entrylo1(val) __write_ulong_c0_register($3, 0, val)
+
+#define read_c0_conf() __read_32bit_c0_register($3, 0)
+#define write_c0_conf(val) __write_32bit_c0_register($3, 0, val)
+
+#define read_c0_context() __read_ulong_c0_register($4, 0)
+#define write_c0_context(val) __write_ulong_c0_register($4, 0, val)
+
+#define read_c0_userlocal() __read_ulong_c0_register($4, 2)
+#define write_c0_userlocal(val) __write_ulong_c0_register($4, 2, val)
+
+#define read_c0_pagemask() __read_32bit_c0_register($5, 0)
+#define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val)
+
+#define read_c0_pagegrain() __read_32bit_c0_register($5, 1)
+#define write_c0_pagegrain(val) __write_32bit_c0_register($5, 1, val)
+
+#define read_c0_wired() __read_32bit_c0_register($6, 0)
+#define write_c0_wired(val) __write_32bit_c0_register($6, 0, val)
+
+#define read_c0_info() __read_32bit_c0_register($7, 0)
+
+#define read_c0_cache() __read_32bit_c0_register($7, 0) /* TX39xx */
+#define write_c0_cache(val) __write_32bit_c0_register($7, 0, val)
+
+#define read_c0_badvaddr() __read_ulong_c0_register($8, 0)
+#define write_c0_badvaddr(val) __write_ulong_c0_register($8, 0, val)
+
+#define read_c0_count() __read_32bit_c0_register($9, 0)
+#define write_c0_count(val) __write_32bit_c0_register($9, 0, val)
+
+#define read_c0_count2() __read_32bit_c0_register($9, 6) /* pnx8550 */
+#define write_c0_count2(val) __write_32bit_c0_register($9, 6, val)
+
+#define read_c0_count3() __read_32bit_c0_register($9, 7) /* pnx8550 */
+#define write_c0_count3(val) __write_32bit_c0_register($9, 7, val)
+
+#define read_c0_entryhi() __read_ulong_c0_register($10, 0)
+#define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val)
+
+#define read_c0_compare() __read_32bit_c0_register($11, 0)
+#define write_c0_compare(val) __write_32bit_c0_register($11, 0, val)
+
+#define read_c0_compare2() __read_32bit_c0_register($11, 6) /* pnx8550 */
+#define write_c0_compare2(val) __write_32bit_c0_register($11, 6, val)
+
+#define read_c0_compare3() __read_32bit_c0_register($11, 7) /* pnx8550 */
+#define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val)
+
+#define read_c0_status() __read_32bit_c0_register($12, 0)
+#ifdef CONFIG_MIPS_MT_SMTC
+#define write_c0_status(val) \
+do { \
+ __write_32bit_c0_register($12, 0, val); \
+ __ehb(); \
+} while (0)
+#else
+/*
+ * Legacy non-SMTC code, which may be hazardous
+ * but which might not support EHB
+ */
+#define write_c0_status(val) __write_32bit_c0_register($12, 0, val)
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+#define read_c0_cause() __read_32bit_c0_register($13, 0)
+#define write_c0_cause(val) __write_32bit_c0_register($13, 0, val)
+
+#define read_c0_epc() __read_ulong_c0_register($14, 0)
+#define write_c0_epc(val) __write_ulong_c0_register($14, 0, val)
+
+#define read_c0_prid() __read_32bit_c0_register($15, 0)
+
+#define read_c0_config() __read_32bit_c0_register($16, 0)
+#define read_c0_config1() __read_32bit_c0_register($16, 1)
+#define read_c0_config2() __read_32bit_c0_register($16, 2)
+#define read_c0_config3() __read_32bit_c0_register($16, 3)
+#define read_c0_config4() __read_32bit_c0_register($16, 4)
+#define read_c0_config5() __read_32bit_c0_register($16, 5)
+#define read_c0_config6() __read_32bit_c0_register($16, 6)
+#define read_c0_config7() __read_32bit_c0_register($16, 7)
+#define write_c0_config(val) __write_32bit_c0_register($16, 0, val)
+#define write_c0_config1(val) __write_32bit_c0_register($16, 1, val)
+#define write_c0_config2(val) __write_32bit_c0_register($16, 2, val)
+#define write_c0_config3(val) __write_32bit_c0_register($16, 3, val)
+#define write_c0_config4(val) __write_32bit_c0_register($16, 4, val)
+#define write_c0_config5(val) __write_32bit_c0_register($16, 5, val)
+#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val)
+#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val)
+
+/*
+ * The WatchLo register. There may be up to 8 of them.
+ */
+#define read_c0_watchlo0() __read_ulong_c0_register($18, 0)
+#define read_c0_watchlo1() __read_ulong_c0_register($18, 1)
+#define read_c0_watchlo2() __read_ulong_c0_register($18, 2)
+#define read_c0_watchlo3() __read_ulong_c0_register($18, 3)
+#define read_c0_watchlo4() __read_ulong_c0_register($18, 4)
+#define read_c0_watchlo5() __read_ulong_c0_register($18, 5)
+#define read_c0_watchlo6() __read_ulong_c0_register($18, 6)
+#define read_c0_watchlo7() __read_ulong_c0_register($18, 7)
+#define write_c0_watchlo0(val) __write_ulong_c0_register($18, 0, val)
+#define write_c0_watchlo1(val) __write_ulong_c0_register($18, 1, val)
+#define write_c0_watchlo2(val) __write_ulong_c0_register($18, 2, val)
+#define write_c0_watchlo3(val) __write_ulong_c0_register($18, 3, val)
+#define write_c0_watchlo4(val) __write_ulong_c0_register($18, 4, val)
+#define write_c0_watchlo5(val) __write_ulong_c0_register($18, 5, val)
+#define write_c0_watchlo6(val) __write_ulong_c0_register($18, 6, val)
+#define write_c0_watchlo7(val) __write_ulong_c0_register($18, 7, val)
+
+/*
+ * The WatchHi register. There may be up to 8 of them.
+ */
+#define read_c0_watchhi0() __read_32bit_c0_register($19, 0)
+#define read_c0_watchhi1() __read_32bit_c0_register($19, 1)
+#define read_c0_watchhi2() __read_32bit_c0_register($19, 2)
+#define read_c0_watchhi3() __read_32bit_c0_register($19, 3)
+#define read_c0_watchhi4() __read_32bit_c0_register($19, 4)
+#define read_c0_watchhi5() __read_32bit_c0_register($19, 5)
+#define read_c0_watchhi6() __read_32bit_c0_register($19, 6)
+#define read_c0_watchhi7() __read_32bit_c0_register($19, 7)
+
+#define write_c0_watchhi0(val) __write_32bit_c0_register($19, 0, val)
+#define write_c0_watchhi1(val) __write_32bit_c0_register($19, 1, val)
+#define write_c0_watchhi2(val) __write_32bit_c0_register($19, 2, val)
+#define write_c0_watchhi3(val) __write_32bit_c0_register($19, 3, val)
+#define write_c0_watchhi4(val) __write_32bit_c0_register($19, 4, val)
+#define write_c0_watchhi5(val) __write_32bit_c0_register($19, 5, val)
+#define write_c0_watchhi6(val) __write_32bit_c0_register($19, 6, val)
+#define write_c0_watchhi7(val) __write_32bit_c0_register($19, 7, val)
+
+#define read_c0_xcontext() __read_ulong_c0_register($20, 0)
+#define write_c0_xcontext(val) __write_ulong_c0_register($20, 0, val)
+
+#define read_c0_intcontrol() __read_32bit_c0_ctrl_register($20)
+#define write_c0_intcontrol(val) __write_32bit_c0_ctrl_register($20, val)
+
+#define read_c0_framemask() __read_32bit_c0_register($21, 0)
+#define write_c0_framemask(val) __write_32bit_c0_register($21, 0, val)
+
+/* RM9000 PerfControl performance counter control register */
+#define read_c0_perfcontrol() __read_32bit_c0_register($22, 0)
+#define write_c0_perfcontrol(val) __write_32bit_c0_register($22, 0, val)
+
+#define read_c0_diag() __read_32bit_c0_register($22, 0)
+#define write_c0_diag(val) __write_32bit_c0_register($22, 0, val)
+
+#define read_c0_diag1() __read_32bit_c0_register($22, 1)
+#define write_c0_diag1(val) __write_32bit_c0_register($22, 1, val)
+
+#define read_c0_diag2() __read_32bit_c0_register($22, 2)
+#define write_c0_diag2(val) __write_32bit_c0_register($22, 2, val)
+
+#define read_c0_diag3() __read_32bit_c0_register($22, 3)
+#define write_c0_diag3(val) __write_32bit_c0_register($22, 3, val)
+
+#define read_c0_diag4() __read_32bit_c0_register($22, 4)
+#define write_c0_diag4(val) __write_32bit_c0_register($22, 4, val)
+
+#define read_c0_diag5() __read_32bit_c0_register($22, 5)
+#define write_c0_diag5(val) __write_32bit_c0_register($22, 5, val)
+
+#define read_c0_debug() __read_32bit_c0_register($23, 0)
+#define write_c0_debug(val) __write_32bit_c0_register($23, 0, val)
+
+#define read_c0_depc() __read_ulong_c0_register($24, 0)
+#define write_c0_depc(val) __write_ulong_c0_register($24, 0, val)
+
+/*
+ * MIPS32 / MIPS64 performance counters
+ */
+#define read_c0_perfctrl0() __read_32bit_c0_register($25, 0)
+#define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val)
+#define read_c0_perfcntr0() __read_32bit_c0_register($25, 1)
+#define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val)
+#define read_c0_perfctrl1() __read_32bit_c0_register($25, 2)
+#define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val)
+#define read_c0_perfcntr1() __read_32bit_c0_register($25, 3)
+#define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val)
+#define read_c0_perfctrl2() __read_32bit_c0_register($25, 4)
+#define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val)
+#define read_c0_perfcntr2() __read_32bit_c0_register($25, 5)
+#define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val)
+#define read_c0_perfctrl3() __read_32bit_c0_register($25, 6)
+#define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val)
+#define read_c0_perfcntr3() __read_32bit_c0_register($25, 7)
+#define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val)
+
+/* RM9000 PerfCount performance counter register */
+#define read_c0_perfcount() __read_64bit_c0_register($25, 0)
+#define write_c0_perfcount(val) __write_64bit_c0_register($25, 0, val)
+
+#define read_c0_ecc() __read_32bit_c0_register($26, 0)
+#define write_c0_ecc(val) __write_32bit_c0_register($26, 0, val)
+
+#define read_c0_derraddr0() __read_ulong_c0_register($26, 1)
+#define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val)
+
+#define read_c0_cacheerr() __read_32bit_c0_register($27, 0)
+
+#define read_c0_derraddr1() __read_ulong_c0_register($27, 1)
+#define write_c0_derraddr1(val) __write_ulong_c0_register($27, 1, val)
+
+#define read_c0_taglo() __read_32bit_c0_register($28, 0)
+#define write_c0_taglo(val) __write_32bit_c0_register($28, 0, val)
+
+#define read_c0_dtaglo() __read_32bit_c0_register($28, 2)
+#define write_c0_dtaglo(val) __write_32bit_c0_register($28, 2, val)
+
+#define read_c0_ddatalo() __read_32bit_c0_register($28, 3)
+#define write_c0_ddatalo(val) __write_32bit_c0_register($28, 3, val)
+
+#define read_c0_staglo() __read_32bit_c0_register($28, 4)
+#define write_c0_staglo(val) __write_32bit_c0_register($28, 4, val)
+
+#define read_c0_taghi() __read_32bit_c0_register($29, 0)
+#define write_c0_taghi(val) __write_32bit_c0_register($29, 0, val)
+
+#define read_c0_errorepc() __read_ulong_c0_register($30, 0)
+#define write_c0_errorepc(val) __write_ulong_c0_register($30, 0, val)
+
+/* MIPSR2 */
+#define read_c0_hwrena() __read_32bit_c0_register($7, 0)
+#define write_c0_hwrena(val) __write_32bit_c0_register($7, 0, val)
+
+#define read_c0_intctl() __read_32bit_c0_register($12, 1)
+#define write_c0_intctl(val) __write_32bit_c0_register($12, 1, val)
+
+#define read_c0_srsctl() __read_32bit_c0_register($12, 2)
+#define write_c0_srsctl(val) __write_32bit_c0_register($12, 2, val)
+
+#define read_c0_srsmap() __read_32bit_c0_register($12, 3)
+#define write_c0_srsmap(val) __write_32bit_c0_register($12, 3, val)
+
+#define read_c0_ebase() __read_32bit_c0_register($15, 1)
+#define write_c0_ebase(val) __write_32bit_c0_register($15, 1, val)
+
+/* BMIPS3300 */
+#define read_c0_brcm_config_0() __read_32bit_c0_register($22, 0)
+#define write_c0_brcm_config_0(val) __write_32bit_c0_register($22, 0, val)
+
+#define read_c0_brcm_bus_pll() __read_32bit_c0_register($22, 4)
+#define write_c0_brcm_bus_pll(val) __write_32bit_c0_register($22, 4, val)
+
+#define read_c0_brcm_reset() __read_32bit_c0_register($22, 5)
+#define write_c0_brcm_reset(val) __write_32bit_c0_register($22, 5, val)
+
+/* BMIPS4380 */
+#define read_c0_brcm_cmt_intr() __read_32bit_c0_register($22, 1)
+#define write_c0_brcm_cmt_intr(val) __write_32bit_c0_register($22, 1, val)
+
+#define read_c0_brcm_cmt_ctrl() __read_32bit_c0_register($22, 2)
+#define write_c0_brcm_cmt_ctrl(val) __write_32bit_c0_register($22, 2, val)
+
+#define read_c0_brcm_cmt_local() __read_32bit_c0_register($22, 3)
+#define write_c0_brcm_cmt_local(val) __write_32bit_c0_register($22, 3, val)
+
+#define read_c0_brcm_config_1() __read_32bit_c0_register($22, 5)
+#define write_c0_brcm_config_1(val) __write_32bit_c0_register($22, 5, val)
+
+#define read_c0_brcm_cbr() __read_32bit_c0_register($22, 6)
+#define write_c0_brcm_cbr(val) __write_32bit_c0_register($22, 6, val)
+
+/* BMIPS5000 */
+#define read_c0_brcm_config() __read_32bit_c0_register($22, 0)
+#define write_c0_brcm_config(val) __write_32bit_c0_register($22, 0, val)
+
+#define read_c0_brcm_mode() __read_32bit_c0_register($22, 1)
+#define write_c0_brcm_mode(val) __write_32bit_c0_register($22, 1, val)
+
+#define read_c0_brcm_action() __read_32bit_c0_register($22, 2)
+#define write_c0_brcm_action(val) __write_32bit_c0_register($22, 2, val)
+
+#define read_c0_brcm_edsp() __read_32bit_c0_register($22, 3)
+#define write_c0_brcm_edsp(val) __write_32bit_c0_register($22, 3, val)
+
+#define read_c0_brcm_bootvec() __read_32bit_c0_register($22, 4)
+#define write_c0_brcm_bootvec(val) __write_32bit_c0_register($22, 4, val)
+
+#define read_c0_brcm_sleepcount() __read_32bit_c0_register($22, 7)
+#define write_c0_brcm_sleepcount(val) __write_32bit_c0_register($22, 7, val)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_MIPSREGS_H */
diff --git a/arch/mips/include/asm/posix_types.h b/arch/mips/include/asm/posix_types.h
new file mode 100644
index 0000000..c200102
--- /dev/null
+++ b/arch/mips/include/asm/posix_types.h
@@ -0,0 +1,144 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 97, 98, 99, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_POSIX_TYPES_H
+#define _ASM_POSIX_TYPES_H
+
+#include <asm/sgidefs.h>
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long __kernel_ino_t;
+typedef unsigned int __kernel_mode_t;
+#if (_MIPS_SZLONG == 32)
+typedef unsigned long __kernel_nlink_t;
+#endif
+#if (_MIPS_SZLONG == 64)
+typedef unsigned int __kernel_nlink_t;
+#endif
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef int __kernel_ipc_pid_t;
+typedef unsigned int __kernel_uid_t;
+typedef unsigned int __kernel_gid_t;
+#if (_MIPS_SZLONG == 32)
+typedef unsigned int __kernel_size_t;
+typedef int __kernel_ssize_t;
+typedef int __kernel_ptrdiff_t;
+#endif
+#if (_MIPS_SZLONG == 64)
+typedef unsigned long __kernel_size_t;
+typedef long __kernel_ssize_t;
+typedef long __kernel_ptrdiff_t;
+#endif
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_timer_t;
+typedef int __kernel_clockid_t;
+typedef long __kernel_daddr_t;
+typedef char * __kernel_caddr_t;
+
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+typedef __kernel_uid_t __kernel_old_uid_t;
+typedef __kernel_gid_t __kernel_old_gid_t;
+typedef unsigned int __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+#if (_MIPS_SZLONG == 32)
+ long val[2];
+#endif
+#if (_MIPS_SZLONG == 64)
+ int val[2];
+#endif
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ __fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
+{
+ unsigned long *__tmp = __p->fds_bits;
+ int __i;
+
+ if (__builtin_constant_p(__FDSET_LONGS)) {
+ switch (__FDSET_LONGS) {
+ case 16:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ __tmp[ 4] = 0; __tmp[ 5] = 0;
+ __tmp[ 6] = 0; __tmp[ 7] = 0;
+ __tmp[ 8] = 0; __tmp[ 9] = 0;
+ __tmp[10] = 0; __tmp[11] = 0;
+ __tmp[12] = 0; __tmp[13] = 0;
+ __tmp[14] = 0; __tmp[15] = 0;
+ return;
+
+ case 8:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ __tmp[ 4] = 0; __tmp[ 5] = 0;
+ __tmp[ 6] = 0; __tmp[ 7] = 0;
+ return;
+
+ case 4:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ return;
+ }
+ }
+ __i = __FDSET_LONGS;
+ while (__i) {
+ __i--;
+ *__tmp = 0;
+ __tmp++;
+ }
+}
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* _ASM_POSIX_TYPES_H */
diff --git a/arch/mips/include/asm/regdef.h b/arch/mips/include/asm/regdef.h
new file mode 100644
index 0000000..7c8ecb6
--- /dev/null
+++ b/arch/mips/include/asm/regdef.h
@@ -0,0 +1,100 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1985 MIPS Computer Systems, Inc.
+ * Copyright (C) 1994, 95, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_REGDEF_H
+#define _ASM_REGDEF_H
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+/*
+ * Symbolic register names for 32 bit ABI
+ */
+#define zero $0 /* wired zero */
+#define AT $1 /* assembler temp - uppercase because of ".set at" */
+#define v0 $2 /* return value */
+#define v1 $3
+#define a0 $4 /* argument registers */
+#define a1 $5
+#define a2 $6
+#define a3 $7
+#define t0 $8 /* caller saved */
+#define t1 $9
+#define t2 $10
+#define t3 $11
+#define t4 $12
+#define t5 $13
+#define t6 $14
+#define t7 $15
+#define s0 $16 /* callee saved */
+#define s1 $17
+#define s2 $18
+#define s3 $19
+#define s4 $20
+#define s5 $21
+#define s6 $22
+#define s7 $23
+#define t8 $24 /* caller saved */
+#define t9 $25
+#define jp $25 /* PIC jump register */
+#define k0 $26 /* kernel scratch */
+#define k1 $27
+#define gp $28 /* global pointer */
+#define sp $29 /* stack pointer */
+#define fp $30 /* frame pointer */
+#define s8 $30 /* same like fp! */
+#define ra $31 /* return address */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32
+
+#define zero $0 /* wired zero */
+#define AT $at /* assembler temp - uppercase because of ".set at" */
+#define v0 $2 /* return value - caller saved */
+#define v1 $3
+#define a0 $4 /* argument registers */
+#define a1 $5
+#define a2 $6
+#define a3 $7
+#define a4 $8 /* arg reg 64 bit; caller saved in 32 bit */
+#define ta0 $8
+#define a5 $9
+#define ta1 $9
+#define a6 $10
+#define ta2 $10
+#define a7 $11
+#define ta3 $11
+#define t0 $12 /* caller saved */
+#define t1 $13
+#define t2 $14
+#define t3 $15
+#define s0 $16 /* callee saved */
+#define s1 $17
+#define s2 $18
+#define s3 $19
+#define s4 $20
+#define s5 $21
+#define s6 $22
+#define s7 $23
+#define t8 $24 /* caller saved */
+#define t9 $25 /* callee address for PIC/temp */
+#define jp $25 /* PIC jump register */
+#define k0 $26 /* kernel temporary */
+#define k1 $27
+#define gp $28 /* global pointer - caller saved for PIC */
+#define sp $29 /* stack pointer */
+#define fp $30 /* frame pointer */
+#define s8 $30 /* callee saved */
+#define ra $31 /* return address */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */
+
+#endif /* _ASM_REGDEF_H */
diff --git a/arch/mips/include/asm/sections.h b/arch/mips/include/asm/sections.h
new file mode 100644
index 0000000..2b8c516
--- /dev/null
+++ b/arch/mips/include/asm/sections.h
@@ -0,0 +1 @@
+#include <asm-generic/sections.h>
diff --git a/arch/mips/include/asm/sgidefs.h b/arch/mips/include/asm/sgidefs.h
new file mode 100644
index 0000000..876442f
--- /dev/null
+++ b/arch/mips/include/asm/sgidefs.h
@@ -0,0 +1,44 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1999, 2001 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef __ASM_SGIDEFS_H
+#define __ASM_SGIDEFS_H
+
+/*
+ * Using a Linux compiler for building Linux seems logic but not to
+ * everybody.
+ */
+#ifndef __linux__
+#error Use a Linux compiler or give up.
+#endif
+
+/*
+ * Definitions for the ISA levels
+ *
+ * With the introduction of MIPS32 / MIPS64 instruction sets definitions
+ * MIPS ISAs are no longer subsets of each other. Therefore comparisons
+ * on these symbols except with == may result in unexpected results and
+ * are forbidden!
+ */
+#define _MIPS_ISA_MIPS1 1
+#define _MIPS_ISA_MIPS2 2
+#define _MIPS_ISA_MIPS3 3
+#define _MIPS_ISA_MIPS4 4
+#define _MIPS_ISA_MIPS5 5
+#define _MIPS_ISA_MIPS32 6
+#define _MIPS_ISA_MIPS64 7
+
+/*
+ * Subprogram calling convention
+ */
+#define _MIPS_SIM_ABI32 1
+#define _MIPS_SIM_NABI32 2
+#define _MIPS_SIM_ABI64 3
+
+#endif /* __ASM_SGIDEFS_H */
diff --git a/arch/mips/include/asm/swab.h b/arch/mips/include/asm/swab.h
new file mode 100644
index 0000000..97c2f81
--- /dev/null
+++ b/arch/mips/include/asm/swab.h
@@ -0,0 +1,59 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 99, 2003 by Ralf Baechle
+ */
+#ifndef _ASM_SWAB_H
+#define _ASM_SWAB_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+#define __SWAB_64_THRU_32__
+
+#ifdef CONFIG_CPU_MIPSR2
+
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
+{
+ __asm__(
+ " wsbh %0, %1 \n"
+ : "=r" (x)
+ : "r" (x));
+
+ return x;
+}
+#define __arch_swab16 __arch_swab16
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+{
+ __asm__(
+ " wsbh %0, %1 \n"
+ " rotr %0, %0, 16 \n"
+ : "=r" (x)
+ : "r" (x));
+
+ return x;
+}
+#define __arch_swab32 __arch_swab32
+
+/*
+ * Having already checked for CONFIG_CPU_MIPSR2, enable the
+ * optimized version for 64-bit kernel on r2 CPUs.
+ */
+#ifdef CONFIG_64BIT
+static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
+{
+ __asm__(
+ " dsbh %0, %1\n"
+ " dshd %0, %0"
+ : "=r" (x)
+ : "r" (x));
+
+ return x;
+}
+#define __arch_swab64 __arch_swab64
+#endif /* CONFIG_64BIT */
+#endif /* CONFIG_CPU_MIPSR2 */
+#endif /* _ASM_SWAB_H */
diff --git a/arch/mips/include/asm/types.h b/arch/mips/include/asm/types.h
new file mode 100644
index 0000000..533812b
--- /dev/null
+++ b/arch/mips/include/asm/types.h
@@ -0,0 +1,49 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle
+ * Copyright (C) 2008 Wind River Systems,
+ * written by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_TYPES_H
+#define _ASM_TYPES_H
+
+/*
+ * We don't use int-l64.h for the kernel anymore but still use it for
+ * userspace to avoid code changes.
+ */
+#if (_MIPS_SZLONG == 64) && !defined(__KERNEL__)
+# include <asm-generic/int-l64.h>
+#else
+# include <asm-generic/int-ll64.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+/*
+ * Don't use phys_t. You've been warned.
+ */
+#ifdef CONFIG_64BIT_PHYS_ADDR
+typedef unsigned long long phys_t;
+#else
+typedef unsigned long phys_t;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TYPES_H */
diff --git a/include/asm-generic/int-ll64.h b/include/asm-generic/int-ll64.h
new file mode 100644
index 0000000..f394147
--- /dev/null
+++ b/include/asm-generic/int-ll64.h
@@ -0,0 +1,78 @@
+/*
+ * asm-generic/int-ll64.h
+ *
+ * Integer declarations for architectures which use "long long"
+ * for 64-bit types.
+ */
+
+#ifndef _ASM_GENERIC_INT_LL64_H
+#define _ASM_GENERIC_INT_LL64_H
+
+#include <asm/bitsperlong.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#ifdef __GNUC__
+__extension__ typedef __signed__ long long __s64;
+__extension__ typedef unsigned long long __u64;
+#else
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+#define S8_C(x) x
+#define U8_C(x) x ## U
+#define S16_C(x) x
+#define U16_C(x) x ## U
+#define S32_C(x) x
+#define U32_C(x) x ## U
+#define S64_C(x) x ## LL
+#define U64_C(x) x ## ULL
+
+#else /* __ASSEMBLY__ */
+
+#define S8_C(x) x
+#define U8_C(x) x
+#define S16_C(x) x
+#define U16_C(x) x
+#define S32_C(x) x
+#define U32_C(x) x
+#define S64_C(x) x
+#define U64_C(x) x
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_GENERIC_INT_LL64_H */
--
1.7.5.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2011-07-24 19:22 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-24 19:22 [PATCH 02/10] MIPS: import libgcc-related files from linux-2.6.39 Antony Pavlov
2011-07-24 19:22 ` Antony Pavlov [this message]
2011-07-24 19:22 ` [PATCH 04/10] MIPS: add start.S, CP0 clocksource, linker script and memory layout function Antony Pavlov
2011-07-24 19:22 ` [PATCH 05/10] MIPS: add Malta machine support to barebox Antony Pavlov
2011-07-24 19:22 ` [PATCH 06/10] MIPS: add qemu malta board " Antony Pavlov
2011-07-25 2:56 ` Jean-Christophe PLAGNIOL-VILLARD
2011-07-24 19:22 ` [PATCH 07/10] MIPS: add initial BCM47xx-based boards support Antony Pavlov
2011-07-24 19:22 ` [PATCH 08/10] MIPS: add initial D-Link DIR-320 wireless router support Antony Pavlov
2011-07-25 2:57 ` Jean-Christophe PLAGNIOL-VILLARD
2011-07-25 8:50 ` Antony Pavlov
2011-07-24 19:22 ` [PATCH 09/10] MIPS: add draft cpuinfo command Antony Pavlov
2011-07-25 2:58 ` Jean-Christophe PLAGNIOL-VILLARD
2011-07-25 8:42 ` Antony Pavlov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1311535336-4534-2-git-send-email-antonynpavlov@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox