mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 07/23] omap: switch to add_generic_device
Date: Fri, 29 Jul 2011 17:59:51 +0200	[thread overview]
Message-ID: <1311955207-22372-14-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <20110729155356.GF25658@game.jcrosoft.org>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/omap/board-beagle.c    |   19 ++++---------------
 arch/arm/boards/omap/board-sdp343x.c   |    1 -
 arch/arm/boards/panda/board.c          |   10 ++--------
 arch/arm/boards/pcm049/board.c         |   20 ++++----------------
 arch/arm/mach-omap/devices-gpmc-nand.c |   13 +++----------
 5 files changed, 13 insertions(+), 50 deletions(-)

diff --git a/arch/arm/boards/omap/board-beagle.c b/arch/arm/boards/omap/board-beagle.c
index dcf2d72..899c34b 100644
--- a/arch/arm/boards/omap/board-beagle.c
+++ b/arch/arm/boards/omap/board-beagle.c
@@ -274,25 +274,12 @@ static struct ehci_platform_data ehci_pdata = {
 };
 #endif /* CONFIG_USB_EHCI_OMAP */
 
-static struct device_d i2c_dev = {
-	.id		= -1,
-	.name		= "i2c-omap",
-	.map_base	= OMAP_I2C1_BASE,
-};
-
 static struct i2c_board_info i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("twl4030", 0x48),
 	},
 };
 
-static struct device_d hsmmc_dev = {
-	.id = -1,
-	.name = "omap-hsmmc",
-	.map_base = 0x4809C000,
-	.size = SZ_4K,
-};
-
 static int beagle_devices_init(void)
 {
 	struct device_d *sdram_dev;
@@ -304,7 +291,8 @@ static int beagle_devices_init(void)
 	armlinux_add_dram(sdram_dev);
 
 	i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
-	register_device(&i2c_dev);
+	add_generic_device("i2c-omap", -1, NULL, 0x4809C000, SZ_4K,
+			   IORESOURCE_MEM, NULL);
 
 #ifdef CONFIG_USB_EHCI_OMAP
 	if (ehci_omap_init(&omap_ehci_pdata) >= 0)
@@ -317,7 +305,8 @@ static int beagle_devices_init(void)
 #endif
 	gpmc_generic_nand_devices_init(0, 16, OMAP_ECC_HAMMING_CODE_HW_ROMCODE);
 
-	register_device(&hsmmc_dev);
+	add_generic_device("omap-hsmmc", -1, NULL, OMAP_I2C1_BASE, 0,
+			   IORESOURCE_MEM, NULL);
 
 	armlinux_set_bootparams((void *)0x80000100);
 	armlinux_set_architecture(MACH_TYPE_OMAP3_BEAGLE);
diff --git a/arch/arm/boards/omap/board-sdp343x.c b/arch/arm/boards/omap/board-sdp343x.c
index 8e8d952..010fbd7 100644
--- a/arch/arm/boards/omap/board-sdp343x.c
+++ b/arch/arm/boards/omap/board-sdp343x.c
@@ -641,7 +641,6 @@ static int sdp3430_flash_init(void)
 static int sdp3430_devices_init(void)
 {
 	struct device_d *sdram_dev;
-	int ret;
 
 	sdram_dev = add_mem_device("ram0", 0x80000000, 128 * 1024 * 1024,
 				   IORESOURCE_MEM_WRITEABLE);
diff --git a/arch/arm/boards/panda/board.c b/arch/arm/boards/panda/board.c
index de43ca5..4c9d8ee 100644
--- a/arch/arm/boards/panda/board.c
+++ b/arch/arm/boards/panda/board.c
@@ -113,13 +113,6 @@ static void __init panda_boardrev_init(void)
 	pr_info("PandaBoard Revision: %03d\n", board_revision);
 }
 
-static struct device_d hsmmc_dev = {
-	.id = -1,
-	.name = "omap-hsmmc",
-	.map_base = 0x4809C100,
-	.size = SZ_4K,
-};
-
 static int panda_devices_init(void)
 {
 	struct device_d *sdram_dev;
@@ -153,7 +146,8 @@ static int panda_devices_init(void)
 	sdram_dev = add_mem_device("ram0", 0x80000000, SZ_1G,
 				   IORESOURCE_MEM_WRITEABLE);
 	armlinux_add_dram(sdram_dev);
-	register_device(&hsmmc_dev);
+	add_generic_device("omap-hsmmc", -1, NULL, 0x4809C100, SZ_4K,
+			   IORESOURCE_MEM, NULL);
 	panda_ehci_init();
 
 	armlinux_set_bootparams((void *)0x80000100);
diff --git a/arch/arm/boards/pcm049/board.c b/arch/arm/boards/pcm049/board.c
index 7eae2cf..ec0d0b8 100644
--- a/arch/arm/boards/pcm049/board.c
+++ b/arch/arm/boards/pcm049/board.c
@@ -73,20 +73,6 @@ static int pcm049_mmu_init(void)
 device_initcall(pcm049_mmu_init);
 #endif
 
-static struct device_d hsmmc_dev = {
-	.id = -1,
-	.name = "omap-hsmmc",
-	.map_base = 0x4809C100,
-	.size = SZ_4K,
-};
-
-static struct device_d smc911x_dev = {
-	.id		= -1,
-	.name		= "smc911x",
-	.map_base	= 0x2C000000,
-	.size		= 0x4000,
-};
-
 static struct gpmc_config net_cfg = {
 	.cfg = {
 		0x00001000,	/* CONF1 */
@@ -104,7 +90,8 @@ static void pcm049_network_init(void)
 {
 	gpmc_cs_config(5, &net_cfg);
 
-	register_device(&smc911x_dev);
+	add_generic_device("smc911x", -1, NULL, 0x2C000000, 0x4000,
+			   IORESOURCE_MEM, NULL);
 }
 
 static int pcm049_devices_init(void)
@@ -116,7 +103,8 @@ static int pcm049_devices_init(void)
 	armlinux_add_dram(sdram_dev);
 	add_mem_device("ram0", 0x40300000, 48 * 1024,
 				   IORESOURCE_MEM_WRITEABLE);
-	register_device(&hsmmc_dev);
+	add_generic_device("omap-hsmmc", -1, NULL, 0x4809C100, SZ_4K,
+			   IORESOURCE_MEM, NULL);
 
 	gpmc_generic_init(0x10);
 
diff --git a/arch/arm/mach-omap/devices-gpmc-nand.c b/arch/arm/mach-omap/devices-gpmc-nand.c
index c2a2b0d..bf409a7 100644
--- a/arch/arm/mach-omap/devices-gpmc-nand.c
+++ b/arch/arm/mach-omap/devices-gpmc-nand.c
@@ -70,15 +70,6 @@ static struct gpmc_nand_platform_data nand_plat = {
 	.priv = (void *)&nand_cfg,
 };
 
-/** NAND device definition */
-static struct device_d gpmc_generic_nand_nand_device = {
-	.id = -1,
-	.name = "gpmc_nand",
-	.map_base = OMAP_GPMC_BASE,
-	.size = 1024 * 4,	/* GPMC size */
-	.platform_data = (void *)&nand_plat,
-};
-
 /**
  * @brief gpmc_generic_nand_devices_init - init generic nand device
  *
@@ -99,5 +90,7 @@ int gpmc_generic_nand_devices_init(int cs, int width,
 
 	/* Configure GPMC CS before register */
 	gpmc_cs_config(nand_plat.cs, &nand_cfg);
-	return register_device(&gpmc_generic_nand_nand_device);
+
+	return !!add_generic_device("gpmc_nand", -1, NULL, OMAP_GPMC_BASE, 1024 * 4,
+			   IORESOURCE_MEM, &nand_plat);
 }
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2011-07-29 16:18 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-07-29 15:53 [PULL] final switch to resoruce Jean-Christophe PLAGNIOL-VILLARD
2011-07-29 15:59 ` [PATCH 01/23] eukrea_cpuimx35: fix warning: 'usbotg_dev' defined but not used Jean-Christophe PLAGNIOL-VILLARD
2011-07-29 15:59 ` [PATCH 1/7] generic_memmap_ro/rw: switch to resource Jean-Christophe PLAGNIOL-VILLARD
2011-07-29 15:59 ` [PATCH 2/7] devinfo: " Jean-Christophe PLAGNIOL-VILLARD
2011-07-29 15:59 ` [PATCH 02/23] generic_memmap_ro/rw: " Jean-Christophe PLAGNIOL-VILLARD
2011-07-29 15:59 ` [PATCH 03/23] devinfo: " Jean-Christophe PLAGNIOL-VILLARD
2011-07-29 15:59 ` [PATCH 3/7] dm9000: replace DM9000_WIDTH_8/16/32 by IORESOURCE_MEM_8/16/32BIT Jean-Christophe PLAGNIOL-VILLARD
2011-07-29 15:59 ` [PATCH 4/7] dm9000: introduce add_dm9000_device to register dm9000 device Jean-Christophe PLAGNIOL-VILLARD
2011-07-29 15:59 ` [PATCH 04/23] dm9000: replace DM9000_WIDTH_8/16/32 by IORESOURCE_MEM_8/16/32BIT Jean-Christophe PLAGNIOL-VILLARD
2011-07-29 15:59 ` [PATCH 05/23] dm9000: introduce add_dm9000_device to register dm9000 device Jean-Christophe PLAGNIOL-VILLARD
2011-07-29 15:59 ` [PATCH 5/7] resource: introduce add_usb_ehci_device to register echi device Jean-Christophe PLAGNIOL-VILLARD
2011-07-29 15:59 ` [PATCH 6/7] omap: switch to add_generic_device Jean-Christophe PLAGNIOL-VILLARD
2011-07-29 15:59 ` [PATCH 06/23] resource: introduce add_usb_ehci_device to register echi device Jean-Christophe PLAGNIOL-VILLARD
2011-07-29 15:59 ` [PATCH 7/7] fb: switch to "struct resource" Jean-Christophe PLAGNIOL-VILLARD
2011-07-29 15:59 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2011-07-29 15:59 ` [PATCH 08/23] " Jean-Christophe PLAGNIOL-VILLARD
2011-07-29 15:59 ` [PATCH 09/23] cfi_flash: convert missing map_base Jean-Christophe PLAGNIOL-VILLARD
2011-07-29 15:59 ` [PATCH 10/23] fsl_udc: switch to resource Jean-Christophe PLAGNIOL-VILLARD
2011-07-29 15:59 ` [PATCH 11/23] pcm030: switch to resources Jean-Christophe PLAGNIOL-VILLARD
2011-07-29 15:59 ` [PATCH 12/23] ipe337: " Jean-Christophe PLAGNIOL-VILLARD
2011-07-29 15:59 ` [PATCH 13/23] s3c/boards: " Jean-Christophe PLAGNIOL-VILLARD
2011-07-30  3:17 ` [PATCH 14/23] ns16550: if not specific f_caps defined use default stdin, stdout, stderr Jean-Christophe PLAGNIOL-VILLARD
2011-07-30  3:17 ` [PATCH 15/23] edb93xx: switch to resource Jean-Christophe PLAGNIOL-VILLARD
2011-07-30  3:17 ` [PATCH 16/23] netx: " Jean-Christophe PLAGNIOL-VILLARD
2011-07-30  3:17 ` [PATCH 17/23] fs: " Jean-Christophe PLAGNIOL-VILLARD
2011-07-30  3:17 ` [PATCH 18/23] ata: " Jean-Christophe PLAGNIOL-VILLARD
2011-07-30  3:17 ` [PATCH 19/23] sandbox: " Jean-Christophe PLAGNIOL-VILLARD
2011-07-30  3:17 ` [PATCH 20/23] imx: switch remaing board " Jean-Christophe PLAGNIOL-VILLARD
2011-07-30  3:17 ` [PATCH 21/23] mci-core: switch " Jean-Christophe PLAGNIOL-VILLARD
2011-08-01  7:32   ` Sascha Hauer
2011-08-01  7:47     ` Jean-Christophe PLAGNIOL-VILLARD
2011-08-01  8:09       ` Sascha Hauer
2011-08-01  8:03         ` Jean-Christophe PLAGNIOL-VILLARD
2011-08-01  8:21           ` Jean-Christophe PLAGNIOL-VILLARD
2011-08-01  8:53           ` Sascha Hauer
2011-07-30  3:17 ` [PATCH 22/23] nios2: remove dead code in generic board Jean-Christophe PLAGNIOL-VILLARD
2011-07-30  3:17 ` [PATCH 23/23] driver: remove map_base Jean-Christophe PLAGNIOL-VILLARD
2011-08-01 10:45 ` [PULL] final switch to resoruce Jean-Christophe PLAGNIOL-VILLARD
2011-08-01 12:11   ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1311955207-22372-14-git-send-email-plagnioj@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox