[PULL] final switch to resoruce

[PULL] final switch to resoruce

[Jean-Christophe PLAGNIOL-VILLARD]

Hi,

	the follwing patch series finish to switch all boards and drivers to
	resource

The following changes since commit 5ba0502901dacc9a1971378d6af8318a1d28051c:

  arm: add support for the i.MX53 loco board (2011-07-29 12:10:38 +0200)

are available in the git repository at:
  git://uboot.jcrosoft.org/barebox.git resource

Jean-Christophe PLAGNIOL-VILLARD (23):
      eukrea_cpuimx35: fix warning: 'usbotg_dev' defined but not used
      generic_memmap_ro/rw: switch to resource
      devinfo: switch to resource
      dm9000: replace DM9000_WIDTH_8/16/32 by IORESOURCE_MEM_8/16/32BIT
      dm9000: introduce add_dm9000_device to register dm9000 device
      resource: introduce add_usb_ehci_device to register echi device
      omap: switch to add_generic_device
      fb: switch to "struct resource"
      cfi_flash: convert missing map_base
      fsl_udc: switch to resource
      pcm030: switch to resources
      ipe337: switch to resources
      s3c/boards: switch to resources
      ns16550: if not specific f_caps defined use default stdin, stdout, stderr
      edb93xx: switch to resource
      netx: switch to resource
      fs: switch to resource
      ata: switch to resource
      sandbox: switch to resource
      imx: switch remaing board to resource
      mci-core: switch to resource
      nios2: remove dead code in generic board
      driver: remove map_base

 arch/arm/boards/a9m2410/a9m2410.c                 |   40 +++--------
 arch/arm/boards/a9m2440/a9m2440.c                 |   40 +++--------
 arch/arm/boards/at91sam9261ek/init.c              |   25 +------
 arch/arm/boards/chumby_falconwing/falconwing.c    |   47 +++----------
 arch/arm/boards/edb93xx/edb93xx.c                 |   25 ++-----
 arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c |   18 +----
 arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c |   22 +-----
 arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c |   21 ++----
 arch/arm/boards/freescale-mx23-evk/mx23-evk.c     |   11 +--
 arch/arm/boards/freescale-mx25-3-stack/3stack.c   |    9 +--
 arch/arm/boards/guf-neso/board.c                  |   10 +---
 arch/arm/boards/karo-tx28/tx28-stk5.c             |   39 +++--------
 arch/arm/boards/mini2440/mini2440.c               |   60 +++-------------
 arch/arm/boards/netx/netx.c                       |   26 +------
 arch/arm/boards/omap/board-beagle.c               |   33 ++-------
 arch/arm/boards/omap/board-omap3evm.c             |    1 -
 arch/arm/boards/omap/board-sdp343x.c              |    2 -
 arch/arm/boards/panda/board.c                     |   29 +++-----
 arch/arm/boards/pcm037/pcm037.c                   |   18 +----
 arch/arm/boards/pcm038/pcm038.c                   |    9 +--
 arch/arm/boards/pcm049/board.c                    |   21 +-----
 arch/arm/boards/phycard-i.MX27/pca100.c           |   18 +----
 arch/arm/boards/pm9261/init.c                     |   26 +------
 arch/arm/boards/scb9328/scb9328.c                 |   25 +------
 arch/arm/mach-omap/devices-gpmc-nand.c            |   13 +---
 arch/blackfin/boards/ipe337/ipe337.c              |   20 +----
 arch/nios2/boards/generic/generic.c               |    8 --
 arch/ppc/boards/pcm030/pcm030.c                   |   30 ++------
 arch/sandbox/board/hostfile.c                     |   14 +---
 arch/sandbox/mach-sandbox/include/mach/hostfile.h |    2 +-
 arch/sandbox/os/common.c                          |    4 +-
 arch/x86/boards/x86_generic/generic_pc.c          |    1 -
 drivers/ata/disk_drive.c                          |    2 +-
 drivers/base/driver.c                             |   40 ++++-------
 drivers/base/resource.c                           |   78 +++++++++++++++++++-
 drivers/mci/mci-core.c                            |    2 +-
 drivers/net/dm9000.c                              |   15 ++--
 drivers/nor/cfi_flash.c                           |    2 +-
 drivers/serial/serial_ns16550.c                   |    5 +-
 drivers/usb/gadget/fsl_udc.c                      |    2 +-
 drivers/usb/host/ehci-hcd.c                       |   22 +++---
 drivers/video/fb.c                                |   16 +++--
 drivers/video/s3c.c                               |   16 +++--
 drivers/video/stm.c                               |    2 +-
 fs/devfs.c                                        |    4 +-
 fs/fs.c                                           |    8 +-
 include/dm9000.h                                  |    5 --
 include/driver.h                                  |   34 ++++++++--
 48 files changed, 300 insertions(+), 620 deletions(-)
 create mode 100644 arch/sandbox/include/asm/io.h

Best Regards,
J.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 01/23] eukrea_cpuimx35: fix warning: 'usbotg_dev' defined but not used

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
index d1de495..7f941cc 100644
--- a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
+++ b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
@@ -126,6 +126,7 @@ static struct device_d usbh2_dev = {
 };
 #endif
 
+#ifdef CONFIG_USB_GADGET
 static struct fsl_usb2_platform_data usb_pdata = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_UTMI,
@@ -137,6 +138,7 @@ static struct device_d usbotg_dev = {
 	.size     = 0x200,
 	.platform_data = &usb_pdata,
 };
+#endif
 
 #ifdef CONFIG_MMU
 static int eukrea_cpuimx35_mmu_init(void)
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 1/7] generic_memmap_ro/rw: switch to resource

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/base/driver.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index b5166c8..3efb538 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -263,7 +263,7 @@ int generic_memmap_ro(struct cdev *cdev, void **map, int flags)
 
 	if (flags & PROT_WRITE)
 		return -EACCES;
-	*map = (void *)cdev->dev->map_base;
+	*map = dev_get_mem_region(cdev->dev, 0);
 	return 0;
 }
 
@@ -272,7 +272,8 @@ int generic_memmap_rw(struct cdev *cdev, void **map, int flags)
 	if (!cdev->dev)
 		return -EINVAL;
 
-	*map = (void *)cdev->dev->map_base;
+	*map = dev_get_mem_region(cdev->dev, 0);
+	return 0;
 	return 0;
 }
 
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 2/7] devinfo: switch to resource

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/base/driver.c |   16 +++++++++++++---
 1 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index 3efb538..1bb74ee 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -340,6 +340,8 @@ static int do_devinfo(struct command *cmdtp, int argc, char *argv[])
 	struct device_d *dev;
 	struct driver_d *drv;
 	struct param_d *param;
+	int i;
+	struct resource *res;
 
 	if (argc == 1) {
 		printf("devices:\n");
@@ -360,9 +362,17 @@ static int do_devinfo(struct command *cmdtp, int argc, char *argv[])
 			return -1;
 		}
 
-		printf("base  : 0x%08x\nsize  : 0x%08x\ndriver: %s\n\n",
-			dev->map_base, dev->size,
-			dev->driver ? 
+		printf("resources:\n");
+		for (i = 0; i < dev->num_resources; i++) {
+			res = &dev->resource[i];
+			printf("num   : %d\n", i);
+			if (res->name)
+				printf("name  : %s\n", res->name);
+			printf("start : 0x%08x\nsize  : 0x%08x\n",
+			       res->start, res->size);
+		}
+
+		printf("driver: %s\n\n", dev->driver ?
 				dev->driver->name : "none");
 
 		if (dev->driver)
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 02/23] generic_memmap_ro/rw: switch to resource

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/base/driver.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index 78e9ea9..3069c49 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -263,7 +263,7 @@ int generic_memmap_ro(struct cdev *cdev, void **map, int flags)
 
 	if (flags & PROT_WRITE)
 		return -EACCES;
-	*map = (void *)cdev->dev->map_base;
+	*map = dev_get_mem_region(cdev->dev, 0);
 	return 0;
 }
 
@@ -272,7 +272,7 @@ int generic_memmap_rw(struct cdev *cdev, void **map, int flags)
 	if (!cdev->dev)
 		return -EINVAL;
 
-	*map = (void *)cdev->dev->map_base;
+	*map = dev_get_mem_region(cdev->dev, 0);
 	return 0;
 }
 
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 03/23] devinfo: switch to resource

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/base/driver.c |   16 +++++++++++++---
 1 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index 3069c49..4ceb346 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -339,6 +339,8 @@ static int do_devinfo(struct command *cmdtp, int argc, char *argv[])
 	struct device_d *dev;
 	struct driver_d *drv;
 	struct param_d *param;
+	int i;
+	struct resource *res;
 
 	if (argc == 1) {
 		printf("devices:\n");
@@ -359,9 +361,17 @@ static int do_devinfo(struct command *cmdtp, int argc, char *argv[])
 			return -1;
 		}
 
-		printf("base  : 0x%08x\nsize  : 0x%08x\ndriver: %s\n\n",
-			dev->map_base, dev->size,
-			dev->driver ? 
+		printf("resources:\n");
+		for (i = 0; i < dev->num_resources; i++) {
+			res = &dev->resource[i];
+			printf("num   : %d\n", i);
+			if (res->name)
+				printf("name  : %s\n", res->name);
+			printf("start : 0x%08x\nsize  : 0x%08x\n",
+			       res->start, res->size);
+		}
+
+		printf("driver: %s\n\n", dev->driver ?
 				dev->driver->name : "none");
 
 		if (dev->driver)
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 3/7] dm9000: replace DM9000_WIDTH_8/16/32 by IORESOURCE_MEM_8/16/32BIT

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/at91sam9261ek/init.c |    2 +-
 arch/arm/boards/mini2440/mini2440.c  |    2 +-
 arch/arm/boards/pm9261/init.c        |    2 +-
 arch/arm/boards/scb9328/scb9328.c    |    2 +-
 drivers/net/dm9000.c                 |   12 ++++++------
 include/dm9000.h                     |    4 ----
 6 files changed, 10 insertions(+), 14 deletions(-)

diff --git a/arch/arm/boards/at91sam9261ek/init.c b/arch/arm/boards/at91sam9261ek/init.c
index 4009523..812b399 100644
--- a/arch/arm/boards/at91sam9261ek/init.c
+++ b/arch/arm/boards/at91sam9261ek/init.c
@@ -89,7 +89,7 @@ static void ek_add_device_nand(void)
  */
 #if defined(CONFIG_DRIVER_NET_DM9000)
 static struct dm9000_platform_data dm9000_data = {
-	.buswidth	= DM9000_WIDTH_16,
+	.buswidth	= IORESOURCE_MEM_16BIT,
 	.srom		= 0,
 };
 
diff --git a/arch/arm/boards/mini2440/mini2440.c b/arch/arm/boards/mini2440/mini2440.c
index 2d27b00..634e035 100644
--- a/arch/arm/boards/mini2440/mini2440.c
+++ b/arch/arm/boards/mini2440/mini2440.c
@@ -63,7 +63,7 @@ static struct device_d nand_dev = {
  * Area 2: Offset 0x304...0x307
  */
 static struct dm9000_platform_data dm9000_data = {
-	.buswidth = DM9000_WIDTH_16,
+	.buswidth = IORESOURCE_MEM_16BIT,
 	.srom     = 1,
 };
 
diff --git a/arch/arm/boards/pm9261/init.c b/arch/arm/boards/pm9261/init.c
index 1059aec..fa21e24 100644
--- a/arch/arm/boards/pm9261/init.c
+++ b/arch/arm/boards/pm9261/init.c
@@ -89,7 +89,7 @@ static void pm_add_device_nand(void)
  */
 #if defined(CONFIG_DRIVER_NET_DM9000)
 static struct dm9000_platform_data dm9000_data = {
-	.buswidth	= DM9000_WIDTH_16,
+	.buswidth	= IORESOURCE_MEM_16BIT,
 	.srom		= 1,
 };
 
diff --git a/arch/arm/boards/scb9328/scb9328.c b/arch/arm/boards/scb9328/scb9328.c
index d49eaff..47aa8ce 100644
--- a/arch/arm/boards/scb9328/scb9328.c
+++ b/arch/arm/boards/scb9328/scb9328.c
@@ -34,7 +34,7 @@
 #include <led.h>
 
 static struct dm9000_platform_data dm9000_data = {
-	.buswidth = DM9000_WIDTH_16,
+	.buswidth = IORESOURCE_MEM_16BIT,
 	.srom     = 1,
 };
 
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index b867d21..691d877 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -294,16 +294,16 @@ static int dm9000_eth_send (struct eth_device *edev,
 	writeb(DM9000_MWCMD, priv->iobase);
 
 	switch (priv->buswidth) {
-	case DM9000_WIDTH_8:
+	case IORESOURCE_MEM_8BIT:
 		for (i = 0; i < length; i++)
 			writeb(data_ptr[i] & 0xff, priv->iodata);
 		break;
-	case DM9000_WIDTH_16:
+	case IORESOURCE_MEM_16BIT:
 		tmplen = (length + 1) / 2;
 		for (i = 0; i < tmplen; i++)
 			writew(((u16 *)data_ptr)[i], priv->iodata);
 		break;
-	case DM9000_WIDTH_32:
+	case IORESOURCE_MEM_32BIT:
 		tmplen = (length + 3) / 4;
 		for (i = 0; i < tmplen; i++)
 			writel(((u32 *) data_ptr)[i], priv->iodata);
@@ -371,20 +371,20 @@ static int dm9000_eth_rx (struct eth_device *edev)
 	/* Move data from DM9000 */
 	/* Read received packet from RX SRAM */
 	switch (priv->buswidth) {
-	case DM9000_WIDTH_8:
+	case IORESOURCE_MEM_8BIT:
 		RxStatus = readb(priv->iodata) + (readb(priv->iodata) << 8);
 		RxLen = readb(priv->iodata) + (readb(priv->iodata) << 8);
 		for (i = 0; i < RxLen; i++)
 			rdptr[i] = readb(priv->iodata);
 		break;
-	case DM9000_WIDTH_16:
+	case IORESOURCE_MEM_16BIT:
 		RxStatus = readw(priv->iodata);
 		RxLen = readw(priv->iodata);
 		tmplen = (RxLen + 1) / 2;
 		for (i = 0; i < tmplen; i++)
 			((u16 *) rdptr)[i] = readw(priv->iodata);
 		break;
-	case DM9000_WIDTH_32:
+	case IORESOURCE_MEM_32BIT:
 		tmpdata = readl(priv->iodata);
 		RxStatus = tmpdata;
 		RxLen = tmpdata >> 16;
diff --git a/include/dm9000.h b/include/dm9000.h
index 0991ab5..c4618f1 100644
--- a/include/dm9000.h
+++ b/include/dm9000.h
@@ -2,10 +2,6 @@
 #ifndef __DM9000_H__
 #define __DM9000_H__
 
-#define DM9000_WIDTH_8		1
-#define DM9000_WIDTH_16		2
-#define DM9000_WIDTH_32		3
-
 struct dm9000_platform_data {
 	int buswidth;
 	int srom;
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 4/7] dm9000: introduce add_dm9000_device to register dm9000 device

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/at91sam9261ek/init.c |   25 +-------------
 arch/arm/boards/mini2440/mini2440.c  |   24 +-------------
 arch/arm/boards/pm9261/init.c        |   26 ++-------------
 arch/arm/boards/scb9328/scb9328.c    |   25 +-------------
 drivers/base/resource.c              |   57 +++++++++++++++++++++++++++++++--
 drivers/net/dm9000.c                 |    3 +-
 include/dm9000.h                     |    1 -
 include/driver.h                     |   11 ++++++
 8 files changed, 75 insertions(+), 97 deletions(-)

diff --git a/arch/arm/boards/at91sam9261ek/init.c b/arch/arm/boards/at91sam9261ek/init.c
index 812b399..627202f 100644
--- a/arch/arm/boards/at91sam9261ek/init.c
+++ b/arch/arm/boards/at91sam9261ek/init.c
@@ -89,31 +89,9 @@ static void ek_add_device_nand(void)
  */
 #if defined(CONFIG_DRIVER_NET_DM9000)
 static struct dm9000_platform_data dm9000_data = {
-	.buswidth	= IORESOURCE_MEM_16BIT,
 	.srom		= 0,
 };
 
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= AT91_CHIPSELECT_2,
-		.size	= 4,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91_CHIPSELECT_2 + 4,
-		.size	= 4,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct device_d dm9000_dev = {
-	.id		= 0,
-	.name		= "dm9000",
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.platform_data	= &dm9000_data,
-};
-
 /*
  * SMC timings for the DM9000.
  * Note: These timings were calculated for MASTER_CLOCK = 100000000 according to the DM9000 timings.
@@ -147,7 +125,8 @@ static void __init ek_add_device_dm9000(void)
 	/* Configure Interrupt pin as input, no pull-up */
 	at91_set_gpio_input(AT91_PIN_PC11, 0);
 
-	register_device(&dm9000_dev);
+	add_dm9000_device(0, AT91_CHIPSELECT_2, AT91_CHIPSELECT_2 + 4,
+			  IORESOURCE_MEM_16BIT, &dm9000_data);
 }
 #else
 static void __init ek_add_device_dm9000(void) {}
diff --git a/arch/arm/boards/mini2440/mini2440.c b/arch/arm/boards/mini2440/mini2440.c
index 634e035..dbf7503 100644
--- a/arch/arm/boards/mini2440/mini2440.c
+++ b/arch/arm/boards/mini2440/mini2440.c
@@ -63,30 +63,9 @@ static struct device_d nand_dev = {
  * Area 2: Offset 0x304...0x307
  */
 static struct dm9000_platform_data dm9000_data = {
-	.buswidth = IORESOURCE_MEM_16BIT,
 	.srom     = 1,
 };
 
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= CS4_BASE + 0x300,
-		.size	= 4,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= CS4_BASE + 0x304,
-		.size	= 4,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct device_d dm9000_dev = {
-	.name     = "dm9000",
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.platform_data = &dm9000_data,
-};
-
 static struct s3c_mci_platform_data mci_data = {
 	.caps = MMC_MODE_4BIT | MMC_MODE_HS | MMC_MODE_HS_52MHz,
 	.voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -332,7 +311,8 @@ static int mini2440_devices_init(void)
 				   IORESOURCE_MEM_WRITEABLE);
 	armlinux_add_dram(sdram_dev);
 
-	register_device(&dm9000_dev);
+	add_dm9000_device(0, CS4_BASE + 0x300, CS4_BASE + 0x304,
+			  IORESOURCE_MEM_16BIT, &dm9000_data);
 #ifdef CONFIG_NAND
 	/* ----------- add some vital partitions -------- */
 	devfs_del_partition("self_raw");
diff --git a/arch/arm/boards/pm9261/init.c b/arch/arm/boards/pm9261/init.c
index fa21e24..783a404 100644
--- a/arch/arm/boards/pm9261/init.c
+++ b/arch/arm/boards/pm9261/init.c
@@ -89,31 +89,9 @@ static void pm_add_device_nand(void)
  */
 #if defined(CONFIG_DRIVER_NET_DM9000)
 static struct dm9000_platform_data dm9000_data = {
-	.buswidth	= IORESOURCE_MEM_16BIT,
 	.srom		= 1,
 };
 
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= AT91_CHIPSELECT_2,
-		.size	= 4,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91_CHIPSELECT_2 + 4,
-		.size	= 4,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct device_d dm9000_dev = {
-	.id		= 0,
-	.name		= "dm9000",
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.platform_data	= &dm9000_data,
-};
-
 /*
  * SMC timings for the DM9000.
  * Note: These timings were calculated for MASTER_CLOCK = 100000000 according to the DM9000 timings.
@@ -141,7 +119,8 @@ static void __init pm_add_device_dm9000(void)
 	/* Configure chip-select 2 (DM9000) */
 	sam9_smc_configure(2, &dm9000_smc_config);
 
-	register_device(&dm9000_dev);
+	add_dm9000_device(0, AT91_CHIPSELECT_2, AT91_CHIPSELECT_2 + 4,
+			  IORESOURCE_MEM_16BIT, &dm9000_data);
 }
 #else
 static void __init ek_add_device_dm9000(void) {}
@@ -151,6 +130,7 @@ static int pm9261_devices_init(void)
 {
 	at91_add_device_sdram(64 * 1024 * 1024);
 	pm_add_device_nand();
+	pm_add_device_dm9000();
 	add_cfi_flash_device(0, AT91_CHIPSELECT_0, 4 * 1024 * 1024, 0);
 
 	devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self");
diff --git a/arch/arm/boards/scb9328/scb9328.c b/arch/arm/boards/scb9328/scb9328.c
index 47aa8ce..a610275 100644
--- a/arch/arm/boards/scb9328/scb9328.c
+++ b/arch/arm/boards/scb9328/scb9328.c
@@ -34,31 +34,9 @@
 #include <led.h>
 
 static struct dm9000_platform_data dm9000_data = {
-	.buswidth = IORESOURCE_MEM_16BIT,
 	.srom     = 1,
 };
 
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= 0x16000000,
-		.size	= 4,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0x16000004,
-		.size	= 4,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct device_d dm9000_dev = {
-	.id		= -1,
-	.name		= "dm9000",
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.platform_data	= &dm9000_data,
-};
-
 struct gpio_led leds[] = {
 	{
 		.gpio = 32 + 21,
@@ -106,7 +84,8 @@ static int scb9328_devices_init(void)
 	sdram_dev = add_mem_device("ram0", 0x08000000, 16 * 1024 * 1024,
 				   IORESOURCE_MEM_WRITEABLE);
 	armlinux_add_dram(sdram_dev);
-	register_device(&dm9000_dev);
+	add_dm9000_device(-1, 0x16000000, 0x16000004,
+			  IORESOURCE_MEM_16BIT, &dm9000_data);
 
 	devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self0");
 	devfs_add_partition("nor0", 0x40000, 0x20000, PARTITION_FIXED, "env0");
diff --git a/drivers/base/resource.c b/drivers/base/resource.c
index f0450d3..98fc68a 100644
--- a/drivers/base/resource.c
+++ b/drivers/base/resource.c
@@ -25,15 +25,25 @@
 #include <driver.h>
 #include <xfuncs.h>
 
-struct device_d *add_generic_device(const char* devname, int id, const char *resname,
-		resource_size_t start, resource_size_t size, unsigned int flags,
-		void *pdata)
+static struct device_d *alloc_device(const char* devname, int id, void *pdata)
 {
 	struct device_d *dev;
 
 	dev = xzalloc(sizeof(*dev));
 	strcpy(dev->name, devname);
 	dev->id = id;
+	dev->platform_data = pdata;
+
+	return dev;
+}
+
+struct device_d *add_generic_device(const char* devname, int id, const char *resname,
+		resource_size_t start, resource_size_t size, unsigned int flags,
+		void *pdata)
+{
+	struct device_d *dev;
+
+	dev = alloc_device(devname, id, pdata);
 	dev->resource = xzalloc(sizeof(struct resource));
 	dev->num_resources = 1;
 	if (resname)
@@ -41,10 +51,49 @@ struct device_d *add_generic_device(const char* devname, int id, const char *res
 	dev->resource[0].start = start;
 	dev->resource[0].size = size;
 	dev->resource[0].flags = flags;
-	dev->platform_data = pdata;
 
 	register_device(dev);
 
 	return dev;
 }
 EXPORT_SYMBOL(add_generic_device);
+
+#ifdef CONFIG_DRIVER_NET_DM9000
+struct device_d *add_dm9000_device(int id, resource_size_t base,
+		resource_size_t data, int flags, void *pdata)
+{
+	struct device_d *dev;
+	resource_size_t size;
+
+	dev = alloc_device("dm9000", id, pdata);
+	dev->resource = xzalloc(sizeof(struct resource) * 2);
+	dev->num_resources = 2;
+
+	switch (flags) {
+	case IORESOURCE_MEM_32BIT:
+		size = 8;
+		break;
+	case IORESOURCE_MEM_16BIT:
+		size = 4;
+		break;
+	case IORESOURCE_MEM_8BIT:
+		size = 2;
+		break;
+	default:
+		printf("dm9000: memory width flag missing\n");
+		return NULL;
+	}
+
+	dev->resource[0].start = base;
+	dev->resource[0].size = size;
+	dev->resource[0].flags = IORESOURCE_MEM | flags;
+	dev->resource[1].start = data;
+	dev->resource[1].size = size;
+	dev->resource[1].flags = IORESOURCE_MEM | flags;
+
+	register_device(dev);
+
+	return dev;
+}
+EXPORT_SYMBOL(add_dm9000_device);
+#endif
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 691d877..be14317 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -500,7 +500,8 @@ static int dm9000_probe(struct device_d *dev)
 	pdata = dev->platform_data;
 
 	priv = edev->priv;
-	priv->buswidth = pdata->buswidth;
+
+	priv->buswidth = dev->resource[0].flags & IORESOURCE_MEM_TYPE_MASK;
 	priv->iodata = dev_request_mem_region(dev, 1);
 	priv->iobase = dev_request_mem_region(dev, 0);
 	priv->srom = pdata->srom;
diff --git a/include/dm9000.h b/include/dm9000.h
index c4618f1..a9a4635 100644
--- a/include/dm9000.h
+++ b/include/dm9000.h
@@ -3,7 +3,6 @@
 #define __DM9000_H__
 
 struct dm9000_platform_data {
-	int buswidth;
 	int srom;
 };
 
diff --git a/include/driver.h b/include/driver.h
index af34803..1f45019 100644
--- a/include/driver.h
+++ b/include/driver.h
@@ -227,6 +227,17 @@ static inline struct device_d *add_cfi_flash_device(int id, resource_size_t star
 				  IORESOURCE_MEM | flags, NULL);
 }
 
+#ifdef CONFIG_DRIVER_NET_DM9000
+struct device_d *add_dm9000_device(int id, resource_size_t base,
+		resource_size_t data, int flags, void *pdata);
+#else
+static inline struct device_d *add_dm9000_device(int id, resource_size_t base,
+		resource_size_t data, int flags, void *pdata)
+{
+	return NULL;
+}
+#endif
+
 /* linear list over all available devices
  */
 extern struct list_head device_list;
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 04/23] dm9000: replace DM9000_WIDTH_8/16/32 by IORESOURCE_MEM_8/16/32BIT

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/at91sam9261ek/init.c |    2 +-
 arch/arm/boards/mini2440/mini2440.c  |    2 +-
 arch/arm/boards/pm9261/init.c        |    2 +-
 arch/arm/boards/scb9328/scb9328.c    |    2 +-
 drivers/net/dm9000.c                 |   12 ++++++------
 include/dm9000.h                     |    4 ----
 6 files changed, 10 insertions(+), 14 deletions(-)

diff --git a/arch/arm/boards/at91sam9261ek/init.c b/arch/arm/boards/at91sam9261ek/init.c
index 4009523..812b399 100644
--- a/arch/arm/boards/at91sam9261ek/init.c
+++ b/arch/arm/boards/at91sam9261ek/init.c
@@ -89,7 +89,7 @@ static void ek_add_device_nand(void)
  */
 #if defined(CONFIG_DRIVER_NET_DM9000)
 static struct dm9000_platform_data dm9000_data = {
-	.buswidth	= DM9000_WIDTH_16,
+	.buswidth	= IORESOURCE_MEM_16BIT,
 	.srom		= 0,
 };
 
diff --git a/arch/arm/boards/mini2440/mini2440.c b/arch/arm/boards/mini2440/mini2440.c
index 2d27b00..634e035 100644
--- a/arch/arm/boards/mini2440/mini2440.c
+++ b/arch/arm/boards/mini2440/mini2440.c
@@ -63,7 +63,7 @@ static struct device_d nand_dev = {
  * Area 2: Offset 0x304...0x307
  */
 static struct dm9000_platform_data dm9000_data = {
-	.buswidth = DM9000_WIDTH_16,
+	.buswidth = IORESOURCE_MEM_16BIT,
 	.srom     = 1,
 };
 
diff --git a/arch/arm/boards/pm9261/init.c b/arch/arm/boards/pm9261/init.c
index 1059aec..fa21e24 100644
--- a/arch/arm/boards/pm9261/init.c
+++ b/arch/arm/boards/pm9261/init.c
@@ -89,7 +89,7 @@ static void pm_add_device_nand(void)
  */
 #if defined(CONFIG_DRIVER_NET_DM9000)
 static struct dm9000_platform_data dm9000_data = {
-	.buswidth	= DM9000_WIDTH_16,
+	.buswidth	= IORESOURCE_MEM_16BIT,
 	.srom		= 1,
 };
 
diff --git a/arch/arm/boards/scb9328/scb9328.c b/arch/arm/boards/scb9328/scb9328.c
index cf72ef4..4c0ed02 100644
--- a/arch/arm/boards/scb9328/scb9328.c
+++ b/arch/arm/boards/scb9328/scb9328.c
@@ -35,7 +35,7 @@
 #include <mach/devices-imx1.h>
 
 static struct dm9000_platform_data dm9000_data = {
-	.buswidth = DM9000_WIDTH_16,
+	.buswidth = IORESOURCE_MEM_16BIT,
 	.srom     = 1,
 };
 
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index b867d21..691d877 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -294,16 +294,16 @@ static int dm9000_eth_send (struct eth_device *edev,
 	writeb(DM9000_MWCMD, priv->iobase);
 
 	switch (priv->buswidth) {
-	case DM9000_WIDTH_8:
+	case IORESOURCE_MEM_8BIT:
 		for (i = 0; i < length; i++)
 			writeb(data_ptr[i] & 0xff, priv->iodata);
 		break;
-	case DM9000_WIDTH_16:
+	case IORESOURCE_MEM_16BIT:
 		tmplen = (length + 1) / 2;
 		for (i = 0; i < tmplen; i++)
 			writew(((u16 *)data_ptr)[i], priv->iodata);
 		break;
-	case DM9000_WIDTH_32:
+	case IORESOURCE_MEM_32BIT:
 		tmplen = (length + 3) / 4;
 		for (i = 0; i < tmplen; i++)
 			writel(((u32 *) data_ptr)[i], priv->iodata);
@@ -371,20 +371,20 @@ static int dm9000_eth_rx (struct eth_device *edev)
 	/* Move data from DM9000 */
 	/* Read received packet from RX SRAM */
 	switch (priv->buswidth) {
-	case DM9000_WIDTH_8:
+	case IORESOURCE_MEM_8BIT:
 		RxStatus = readb(priv->iodata) + (readb(priv->iodata) << 8);
 		RxLen = readb(priv->iodata) + (readb(priv->iodata) << 8);
 		for (i = 0; i < RxLen; i++)
 			rdptr[i] = readb(priv->iodata);
 		break;
-	case DM9000_WIDTH_16:
+	case IORESOURCE_MEM_16BIT:
 		RxStatus = readw(priv->iodata);
 		RxLen = readw(priv->iodata);
 		tmplen = (RxLen + 1) / 2;
 		for (i = 0; i < tmplen; i++)
 			((u16 *) rdptr)[i] = readw(priv->iodata);
 		break;
-	case DM9000_WIDTH_32:
+	case IORESOURCE_MEM_32BIT:
 		tmpdata = readl(priv->iodata);
 		RxStatus = tmpdata;
 		RxLen = tmpdata >> 16;
diff --git a/include/dm9000.h b/include/dm9000.h
index 0991ab5..c4618f1 100644
--- a/include/dm9000.h
+++ b/include/dm9000.h
@@ -2,10 +2,6 @@
 #ifndef __DM9000_H__
 #define __DM9000_H__
 
-#define DM9000_WIDTH_8		1
-#define DM9000_WIDTH_16		2
-#define DM9000_WIDTH_32		3
-
 struct dm9000_platform_data {
 	int buswidth;
 	int srom;
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 05/23] dm9000: introduce add_dm9000_device to register dm9000 device

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/at91sam9261ek/init.c |   25 +-------------
 arch/arm/boards/mini2440/mini2440.c  |   24 +-------------
 arch/arm/boards/pm9261/init.c        |   26 ++-------------
 arch/arm/boards/scb9328/scb9328.c    |   25 +-------------
 drivers/base/resource.c              |   57 +++++++++++++++++++++++++++++++--
 drivers/net/dm9000.c                 |    3 +-
 include/dm9000.h                     |    1 -
 include/driver.h                     |   11 ++++++
 8 files changed, 75 insertions(+), 97 deletions(-)

diff --git a/arch/arm/boards/at91sam9261ek/init.c b/arch/arm/boards/at91sam9261ek/init.c
index 812b399..627202f 100644
--- a/arch/arm/boards/at91sam9261ek/init.c
+++ b/arch/arm/boards/at91sam9261ek/init.c
@@ -89,31 +89,9 @@ static void ek_add_device_nand(void)
  */
 #if defined(CONFIG_DRIVER_NET_DM9000)
 static struct dm9000_platform_data dm9000_data = {
-	.buswidth	= IORESOURCE_MEM_16BIT,
 	.srom		= 0,
 };
 
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= AT91_CHIPSELECT_2,
-		.size	= 4,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91_CHIPSELECT_2 + 4,
-		.size	= 4,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct device_d dm9000_dev = {
-	.id		= 0,
-	.name		= "dm9000",
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.platform_data	= &dm9000_data,
-};
-
 /*
  * SMC timings for the DM9000.
  * Note: These timings were calculated for MASTER_CLOCK = 100000000 according to the DM9000 timings.
@@ -147,7 +125,8 @@ static void __init ek_add_device_dm9000(void)
 	/* Configure Interrupt pin as input, no pull-up */
 	at91_set_gpio_input(AT91_PIN_PC11, 0);
 
-	register_device(&dm9000_dev);
+	add_dm9000_device(0, AT91_CHIPSELECT_2, AT91_CHIPSELECT_2 + 4,
+			  IORESOURCE_MEM_16BIT, &dm9000_data);
 }
 #else
 static void __init ek_add_device_dm9000(void) {}
diff --git a/arch/arm/boards/mini2440/mini2440.c b/arch/arm/boards/mini2440/mini2440.c
index 634e035..dbf7503 100644
--- a/arch/arm/boards/mini2440/mini2440.c
+++ b/arch/arm/boards/mini2440/mini2440.c
@@ -63,30 +63,9 @@ static struct device_d nand_dev = {
  * Area 2: Offset 0x304...0x307
  */
 static struct dm9000_platform_data dm9000_data = {
-	.buswidth = IORESOURCE_MEM_16BIT,
 	.srom     = 1,
 };
 
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= CS4_BASE + 0x300,
-		.size	= 4,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= CS4_BASE + 0x304,
-		.size	= 4,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct device_d dm9000_dev = {
-	.name     = "dm9000",
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.platform_data = &dm9000_data,
-};
-
 static struct s3c_mci_platform_data mci_data = {
 	.caps = MMC_MODE_4BIT | MMC_MODE_HS | MMC_MODE_HS_52MHz,
 	.voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -332,7 +311,8 @@ static int mini2440_devices_init(void)
 				   IORESOURCE_MEM_WRITEABLE);
 	armlinux_add_dram(sdram_dev);
 
-	register_device(&dm9000_dev);
+	add_dm9000_device(0, CS4_BASE + 0x300, CS4_BASE + 0x304,
+			  IORESOURCE_MEM_16BIT, &dm9000_data);
 #ifdef CONFIG_NAND
 	/* ----------- add some vital partitions -------- */
 	devfs_del_partition("self_raw");
diff --git a/arch/arm/boards/pm9261/init.c b/arch/arm/boards/pm9261/init.c
index fa21e24..783a404 100644
--- a/arch/arm/boards/pm9261/init.c
+++ b/arch/arm/boards/pm9261/init.c
@@ -89,31 +89,9 @@ static void pm_add_device_nand(void)
  */
 #if defined(CONFIG_DRIVER_NET_DM9000)
 static struct dm9000_platform_data dm9000_data = {
-	.buswidth	= IORESOURCE_MEM_16BIT,
 	.srom		= 1,
 };
 
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= AT91_CHIPSELECT_2,
-		.size	= 4,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91_CHIPSELECT_2 + 4,
-		.size	= 4,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct device_d dm9000_dev = {
-	.id		= 0,
-	.name		= "dm9000",
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.platform_data	= &dm9000_data,
-};
-
 /*
  * SMC timings for the DM9000.
  * Note: These timings were calculated for MASTER_CLOCK = 100000000 according to the DM9000 timings.
@@ -141,7 +119,8 @@ static void __init pm_add_device_dm9000(void)
 	/* Configure chip-select 2 (DM9000) */
 	sam9_smc_configure(2, &dm9000_smc_config);
 
-	register_device(&dm9000_dev);
+	add_dm9000_device(0, AT91_CHIPSELECT_2, AT91_CHIPSELECT_2 + 4,
+			  IORESOURCE_MEM_16BIT, &dm9000_data);
 }
 #else
 static void __init ek_add_device_dm9000(void) {}
@@ -151,6 +130,7 @@ static int pm9261_devices_init(void)
 {
 	at91_add_device_sdram(64 * 1024 * 1024);
 	pm_add_device_nand();
+	pm_add_device_dm9000();
 	add_cfi_flash_device(0, AT91_CHIPSELECT_0, 4 * 1024 * 1024, 0);
 
 	devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self");
diff --git a/arch/arm/boards/scb9328/scb9328.c b/arch/arm/boards/scb9328/scb9328.c
index 4c0ed02..5c52af9 100644
--- a/arch/arm/boards/scb9328/scb9328.c
+++ b/arch/arm/boards/scb9328/scb9328.c
@@ -35,31 +35,9 @@
 #include <mach/devices-imx1.h>
 
 static struct dm9000_platform_data dm9000_data = {
-	.buswidth = IORESOURCE_MEM_16BIT,
 	.srom     = 1,
 };
 
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= 0x16000000,
-		.size	= 4,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0x16000004,
-		.size	= 4,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct device_d dm9000_dev = {
-	.id		= -1,
-	.name		= "dm9000",
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.platform_data	= &dm9000_data,
-};
-
 struct gpio_led leds[] = {
 	{
 		.gpio = 32 + 21,
@@ -107,7 +85,8 @@ static int scb9328_devices_init(void)
 	sdram_dev = add_mem_device("ram0", 0x08000000, 16 * 1024 * 1024,
 				   IORESOURCE_MEM_WRITEABLE);
 	armlinux_add_dram(sdram_dev);
-	register_device(&dm9000_dev);
+	add_dm9000_device(-1, 0x16000000, 0x16000004,
+			  IORESOURCE_MEM_16BIT, &dm9000_data);
 
 	devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self0");
 	devfs_add_partition("nor0", 0x40000, 0x20000, PARTITION_FIXED, "env0");
diff --git a/drivers/base/resource.c b/drivers/base/resource.c
index f0450d3..98fc68a 100644
--- a/drivers/base/resource.c
+++ b/drivers/base/resource.c
@@ -25,15 +25,25 @@
 #include <driver.h>
 #include <xfuncs.h>
 
-struct device_d *add_generic_device(const char* devname, int id, const char *resname,
-		resource_size_t start, resource_size_t size, unsigned int flags,
-		void *pdata)
+static struct device_d *alloc_device(const char* devname, int id, void *pdata)
 {
 	struct device_d *dev;
 
 	dev = xzalloc(sizeof(*dev));
 	strcpy(dev->name, devname);
 	dev->id = id;
+	dev->platform_data = pdata;
+
+	return dev;
+}
+
+struct device_d *add_generic_device(const char* devname, int id, const char *resname,
+		resource_size_t start, resource_size_t size, unsigned int flags,
+		void *pdata)
+{
+	struct device_d *dev;
+
+	dev = alloc_device(devname, id, pdata);
 	dev->resource = xzalloc(sizeof(struct resource));
 	dev->num_resources = 1;
 	if (resname)
@@ -41,10 +51,49 @@ struct device_d *add_generic_device(const char* devname, int id, const char *res
 	dev->resource[0].start = start;
 	dev->resource[0].size = size;
 	dev->resource[0].flags = flags;
-	dev->platform_data = pdata;
 
 	register_device(dev);
 
 	return dev;
 }
 EXPORT_SYMBOL(add_generic_device);
+
+#ifdef CONFIG_DRIVER_NET_DM9000
+struct device_d *add_dm9000_device(int id, resource_size_t base,
+		resource_size_t data, int flags, void *pdata)
+{
+	struct device_d *dev;
+	resource_size_t size;
+
+	dev = alloc_device("dm9000", id, pdata);
+	dev->resource = xzalloc(sizeof(struct resource) * 2);
+	dev->num_resources = 2;
+
+	switch (flags) {
+	case IORESOURCE_MEM_32BIT:
+		size = 8;
+		break;
+	case IORESOURCE_MEM_16BIT:
+		size = 4;
+		break;
+	case IORESOURCE_MEM_8BIT:
+		size = 2;
+		break;
+	default:
+		printf("dm9000: memory width flag missing\n");
+		return NULL;
+	}
+
+	dev->resource[0].start = base;
+	dev->resource[0].size = size;
+	dev->resource[0].flags = IORESOURCE_MEM | flags;
+	dev->resource[1].start = data;
+	dev->resource[1].size = size;
+	dev->resource[1].flags = IORESOURCE_MEM | flags;
+
+	register_device(dev);
+
+	return dev;
+}
+EXPORT_SYMBOL(add_dm9000_device);
+#endif
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 691d877..be14317 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -500,7 +500,8 @@ static int dm9000_probe(struct device_d *dev)
 	pdata = dev->platform_data;
 
 	priv = edev->priv;
-	priv->buswidth = pdata->buswidth;
+
+	priv->buswidth = dev->resource[0].flags & IORESOURCE_MEM_TYPE_MASK;
 	priv->iodata = dev_request_mem_region(dev, 1);
 	priv->iobase = dev_request_mem_region(dev, 0);
 	priv->srom = pdata->srom;
diff --git a/include/dm9000.h b/include/dm9000.h
index c4618f1..a9a4635 100644
--- a/include/dm9000.h
+++ b/include/dm9000.h
@@ -3,7 +3,6 @@
 #define __DM9000_H__
 
 struct dm9000_platform_data {
-	int buswidth;
 	int srom;
 };
 
diff --git a/include/driver.h b/include/driver.h
index 9f00754..38c0bca 100644
--- a/include/driver.h
+++ b/include/driver.h
@@ -235,6 +235,17 @@ static inline struct device_d *add_ns16550_device(int id, resource_size_t start,
 				  IORESOURCE_MEM, pdata);
 }
 
+#ifdef CONFIG_DRIVER_NET_DM9000
+struct device_d *add_dm9000_device(int id, resource_size_t base,
+		resource_size_t data, int flags, void *pdata);
+#else
+static inline struct device_d *add_dm9000_device(int id, resource_size_t base,
+		resource_size_t data, int flags, void *pdata)
+{
+	return NULL;
+}
+#endif
+
 /* linear list over all available devices
  */
 extern struct list_head device_list;
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 5/7] resource: introduce add_usb_ehci_device to register echi device

[Jean-Christophe PLAGNIOL-VILLARD]

pass the hccr and hcor register base via resource

instroduce add_generic_usb_echi_device with hccr = base + 0x100 and
hcor = base + 0x140

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/chumby_falconwing/falconwing.c    |   17 +--------------
 arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c |    8 +------
 arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c |    9 +-------
 arch/arm/boards/freescale-mx25-3-stack/3stack.c   |    9 +-------
 arch/arm/boards/guf-neso/board.c                  |   10 +--------
 arch/arm/boards/omap/board-beagle.c               |   13 +----------
 arch/arm/boards/panda/board.c                     |   18 ++++++----------
 arch/arm/boards/pcm037/pcm037.c                   |   18 +---------------
 arch/arm/boards/pcm038/pcm038.c                   |    9 +-------
 arch/arm/boards/phycard-i.MX27/pca100.c           |   18 +---------------
 drivers/base/resource.c                           |   21 ++++++++++++++++++++
 drivers/usb/host/ehci-hcd.c                       |   22 +++++++++++---------
 include/driver.h                                  |   17 ++++++++++++++++
 13 files changed, 70 insertions(+), 119 deletions(-)

diff --git a/arch/arm/boards/chumby_falconwing/falconwing.c b/arch/arm/boards/chumby_falconwing/falconwing.c
index 7a5f37e..5875955 100644
--- a/arch/arm/boards/chumby_falconwing/falconwing.c
+++ b/arch/arm/boards/chumby_falconwing/falconwing.c
@@ -327,20 +327,6 @@ static int register_persistant_environment(void)
 	return devfs_add_partition("disk0.1", 0, cdev->size, DEVFS_PARTITION_FIXED, "env0");
 }
 
-static struct ehci_platform_data chumby_usb_pdata = {
-	.flags = EHCI_HAS_TT,
-	.hccr_offset = 0x100,
-	.hcor_offset = 0x140,
-};
-
-static struct device_d usb_dev = {
-	.name		= "ehci",
-	.id		= -1,
-	.map_base	= IMX_USB_BASE,
-	.size		= 0x200,
-	.platform_data	= &chumby_usb_pdata,
-};
-
 #define GPIO_USB_HUB_RESET	29
 #define GPIO_USB_HUB_POWER	26
 
@@ -353,7 +339,8 @@ static void falconwing_init_usb(void)
 	gpio_direction_output(GPIO_USB_HUB_RESET, 1);
 
 	imx_usb_phy_enable();
-	register_device(&usb_dev);
+
+	add_generic_usb_ehci_device(-1, IMX_USB_BASE, NULL);
 }
 
 static int falconwing_devices_init(void)
diff --git a/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c b/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
index 6ea4a6e..47d5e12 100644
--- a/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
+++ b/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
@@ -148,12 +148,6 @@ static void imx25_usb_init(void)
 	writel(tmp | 0x3, IMX_OTG_BASE + 0x5a8);
 }
 
-static struct device_d usbh2_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = IMX_OTG_BASE + 0x400,
-	.size     = 0x200,
-};
 #endif
 
 static struct fsl_usb2_platform_data usb_pdata = {
@@ -282,7 +276,7 @@ static int eukrea_cpuimx25_devices_init(void)
 
 #ifdef CONFIG_USB
 	imx25_usb_init();
-	register_device(&usbh2_dev);
+	add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
 #endif
 	register_device(&usbotg_dev);
 
diff --git a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
index d1de495..4de3c5a 100644
--- a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
+++ b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
@@ -117,13 +117,6 @@ static void imx35_usb_init(void)
 	tmp = readl(IMX_OTG_BASE + 0x5a8);
 	writel(tmp | 0x3, IMX_OTG_BASE + 0x5a8);
 }
-
-static struct device_d usbh2_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = IMX_OTG_BASE + 0x400,
-	.size     = 0x200,
-};
 #endif
 
 static struct fsl_usb2_platform_data usb_pdata = {
@@ -181,7 +174,7 @@ static int eukrea_cpuimx35_devices_init(void)
 
 #ifdef CONFIG_USB
 	imx35_usb_init();
-	register_device(&usbh2_dev);
+	add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
 #endif
 #ifdef CONFIG_USB_GADGET
 	/* Workaround ENGcm09152 */
diff --git a/arch/arm/boards/freescale-mx25-3-stack/3stack.c b/arch/arm/boards/freescale-mx25-3-stack/3stack.c
index 6d4bde5..8d9b29d 100644
--- a/arch/arm/boards/freescale-mx25-3-stack/3stack.c
+++ b/arch/arm/boards/freescale-mx25-3-stack/3stack.c
@@ -137,13 +137,6 @@ static void imx25_usb_init(void)
 	tmp = readl(IMX_OTG_BASE + 0x5a8);
 	writel(tmp | 0x3, IMX_OTG_BASE + 0x5a8);
 }
-
-static struct device_d usbh2_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = IMX_OTG_BASE + 0x400,
-	.size     = 0x200,
-};
 #endif
 
 static struct i2c_board_info i2c_devices[] = {
@@ -207,7 +200,7 @@ static int imx25_devices_init(void)
 	 * the CPLD has to be initialized.
 	 */
 	imx25_usb_init();
-	register_device(&usbh2_dev);
+	add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
 #endif
 
 	imx25_add_fec(&fec_info);
diff --git a/arch/arm/boards/guf-neso/board.c b/arch/arm/boards/guf-neso/board.c
index 4e0ac90..f3a4635 100644
--- a/arch/arm/boards/guf-neso/board.c
+++ b/arch/arm/boards/guf-neso/board.c
@@ -114,14 +114,6 @@ static struct imx_fb_platform_data neso_fb_data = {
 };
 
 #ifdef CONFIG_USB
-
-static struct device_d usbh2_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = IMX_OTG_BASE + 0x400,
-	.size     = 0x200,
-};
-
 static void neso_usbh_init(void)
 {
 	uint32_t temp;
@@ -304,7 +296,7 @@ static int neso_devices_init(void)
 
 #ifdef CONFIG_USB
 	neso_usbh_init();
-	register_device(&usbh2_dev);
+	add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
 #endif
 
 	imx27_add_fec(&fec_info);
diff --git a/arch/arm/boards/omap/board-beagle.c b/arch/arm/boards/omap/board-beagle.c
index 107a009..adf0b94 100644
--- a/arch/arm/boards/omap/board-beagle.c
+++ b/arch/arm/boards/omap/board-beagle.c
@@ -277,16 +277,6 @@ static struct omap_hcd omap_ehci_pdata = {
 
 static struct ehci_platform_data ehci_pdata = {
 	.flags = 0,
-	.hccr_offset = 0x100,
-	.hcor_offset = 0x110,
-};
-
-static struct device_d usbh_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = 0x48064700,
-	.size     = 4 * 1024,
-	.platform_data = &ehci_pdata,
 };
 #endif /* CONFIG_USB_EHCI_OMAP */
 
@@ -324,7 +314,8 @@ static int beagle_devices_init(void)
 
 #ifdef CONFIG_USB_EHCI_OMAP
 	if (ehci_omap_init(&omap_ehci_pdata) >= 0)
-		register_device(&usbh_dev);
+		add_usb_ehci_device(-1, 0x48064700 + 0x100,
+				    0x48064700 + 0x110, &ehci_pdata);
 #endif /* CONFIG_USB_EHCI_OMAP */
 #ifdef CONFIG_GPMC
 	/* WP is made high and WAIT1 active Low */
diff --git a/arch/arm/boards/panda/board.c b/arch/arm/boards/panda/board.c
index c5b1e5c..9cbc10b 100644
--- a/arch/arm/boards/panda/board.c
+++ b/arch/arm/boards/panda/board.c
@@ -67,18 +67,9 @@ static int panda_mmu_init(void)
 device_initcall(panda_mmu_init);
 #endif
 
+#ifdef CONFIG_USB_EHCI
 static struct ehci_platform_data ehci_pdata = {
 	.flags = 0,
-	.hccr_offset = 0x0,
-	.hcor_offset = 0x10,
-};
-
-static struct device_d usbh_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = 0x4a064c00,
-	.size     = 4 * 1024,
-	.platform_data = &ehci_pdata,
 };
 
 static void panda_ehci_init(void)
@@ -111,8 +102,13 @@ static void panda_ehci_init(void)
 	/* enable power to hub */
 	gpio_set_value(GPIO_HUB_POWER, 1);
 
-	register_device(&usbh_dev);
+	add_usb_ehci_device(-1, 0x4a064c00,
+			    0x4a064c00 + 0x10, &ehci_pdata);
 }
+#else
+static void panda_ehci_init(void)
+{}
+#endif
 
 static void __init panda_boardrev_init(void)
 {
diff --git a/arch/arm/boards/pcm037/pcm037.c b/arch/arm/boards/pcm037/pcm037.c
index 6e20d1d..c2d0e8b 100644
--- a/arch/arm/boards/pcm037/pcm037.c
+++ b/arch/arm/boards/pcm037/pcm037.c
@@ -70,20 +70,6 @@ struct imx_nand_platform_data nand_info = {
 };
 
 #ifdef CONFIG_USB
-static struct device_d usbotg_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = IMX_OTG_BASE,
-	.size     = 0x200,
-};
-
-static struct device_d usbh2_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = IMX_OTG_BASE + 0x400,
-	.size     = 0x200,
-};
-
 static void pcm037_usb_init(void)
 {
 	u32 tmp;
@@ -250,8 +236,8 @@ static int imx31_devices_init(void)
 #endif
 #ifdef CONFIG_USB
 	pcm037_usb_init();
-	register_device(&usbotg_dev);
-	register_device(&usbh2_dev);
+	add_generic_usb_ehci_device(-1, IMX_OTG_BASE, NULL);
+	add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
 #endif
 
 	armlinux_set_bootparams((void *)0x80000100);
diff --git a/arch/arm/boards/pcm038/pcm038.c b/arch/arm/boards/pcm038/pcm038.c
index 2f87b12..02c3dba 100644
--- a/arch/arm/boards/pcm038/pcm038.c
+++ b/arch/arm/boards/pcm038/pcm038.c
@@ -109,13 +109,6 @@ static struct imx_fb_platform_data pcm038_fb_data = {
 };
 
 #ifdef CONFIG_USB
-static struct device_d usbh2_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = IMX_OTG_BASE + 0x400,
-	.size     = 0x200,
-};
-
 static void pcm038_usbh_init(void)
 {
 	uint32_t temp;
@@ -271,7 +264,7 @@ static int pcm038_devices_init(void)
 
 #ifdef CONFIG_USB
 	pcm038_usbh_init();
-	register_device(&usbh2_dev);
+	add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
 #endif
 
 	/* Register the fec device after the PLL re-initialisation
diff --git a/arch/arm/boards/phycard-i.MX27/pca100.c b/arch/arm/boards/phycard-i.MX27/pca100.c
index 63216f5..e557d89 100644
--- a/arch/arm/boards/phycard-i.MX27/pca100.c
+++ b/arch/arm/boards/phycard-i.MX27/pca100.c
@@ -53,20 +53,6 @@ struct imx_nand_platform_data nand_info = {
 };
 
 #ifdef CONFIG_USB
-static struct device_d usbotg_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = IMX_OTG_BASE,
-	.size     = 0x200,
-};
-
-static struct device_d usbh2_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = IMX_OTG_BASE + 0x400,
-	.size     = 0x200,
-};
-
 static void pca100_usb_register(void)
 {
 	mdelay(10);
@@ -77,9 +63,9 @@ static void pca100_usb_register(void)
 	mdelay(10);
 
 	isp1504_set_vbus_power((void *)(IMX_OTG_BASE + 0x170), 1);
-	register_device(&usbotg_dev);
+	add_generic_usb_ehci_device(-1, IMX_OTG_BASE, NULL);
 	isp1504_set_vbus_power((void *)(IMX_OTG_BASE + 0x570), 1);
-	register_device(&usbh2_dev);
+	add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
 }
 #endif
 
diff --git a/drivers/base/resource.c b/drivers/base/resource.c
index 98fc68a..5fc705f 100644
--- a/drivers/base/resource.c
+++ b/drivers/base/resource.c
@@ -97,3 +97,24 @@ struct device_d *add_dm9000_device(int id, resource_size_t base,
 }
 EXPORT_SYMBOL(add_dm9000_device);
 #endif
+
+#ifdef CONFIG_USB_EHCI
+struct device_d *add_usb_ehci_device(int id, resource_size_t hccr,
+		resource_size_t hcor, void *pdata)
+{
+	struct device_d *dev;
+
+	dev = alloc_device("ehci", id, pdata);
+	dev->resource = xzalloc(sizeof(struct resource) * 2);
+	dev->num_resources = 2;
+	dev->resource[0].start = hccr;
+	dev->resource[0].flags = IORESOURCE_MEM;
+	dev->resource[1].start = hcor;
+	dev->resource[1].flags = IORESOURCE_MEM;
+
+	register_device(dev);
+
+	return dev;
+}
+EXPORT_SYMBOL(add_usb_ehci_device);
+#endif
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 844dc1d..54856a3 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -900,20 +900,22 @@ static int ehci_probe(struct device_d *dev)
 	host = &ehci->host;
 	dev->priv = ehci;
 
-	if (pdata) {
+	/* default to EHCI_HAS_TT to not change behaviour of boards
+	 * with platform_data
+	 */
+	if (pdata)
 		ehci->flags = pdata->flags;
-		ehci->hccr = (void *)(dev->map_base + pdata->hccr_offset);
-		ehci->hcor = (void *)(dev->map_base + pdata->hcor_offset);
-	}
-	else {
-		/* default to EHCI_HAS_TT to not change behaviour of boards
-		 * with platform_data
-		 */
+	else
 		ehci->flags = EHCI_HAS_TT;
-		ehci->hccr = (void *)(dev->map_base + 0x100);
-		ehci->hcor = (void *)(dev->map_base + 0x140);
+
+	if (dev->num_resources < 2) {
+		printf("echi: need 2 resources base and data");
+		return -ENODEV;
 	}
 
+	ehci->hccr = dev_request_mem_region(dev, 0);
+	ehci->hcor = dev_request_mem_region(dev, 1);
+
 	host->init = ehci_init;
 	host->submit_int_msg = submit_int_msg;
 	host->submit_control_msg = submit_control_msg;
diff --git a/include/driver.h b/include/driver.h
index 1f45019..fecaecc 100644
--- a/include/driver.h
+++ b/include/driver.h
@@ -238,6 +238,23 @@ static inline struct device_d *add_dm9000_device(int id, resource_size_t base,
 }
 #endif
 
+#ifdef CONFIG_USB_EHCI
+struct device_d *add_usb_ehci_device(int id, resource_size_t hccr,
+		resource_size_t hcor, void *pdata);
+#else
+static inline struct device_d *add_usb_ehci_device(int id, resource_size_t hccr,
+		resource_size_t hcor, void *pdata)
+{
+	return NULL;
+}
+#endif
+
+static inline struct device_d *add_generic_usb_ehci_device(int id,
+		resource_size_t base, void *pdata)
+{
+	return add_usb_ehci_device(id, base + 0x100, base + 0x140, pdata);
+}
+
 /* linear list over all available devices
  */
 extern struct list_head device_list;
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 6/7] omap: switch to add_generic_device

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/omap/board-beagle.c    |   30 ++++++------------------------
 arch/arm/boards/omap/board-sdp343x.c   |    1 -
 arch/arm/mach-omap/devices-gpmc-nand.c |   13 +++----------
 3 files changed, 9 insertions(+), 35 deletions(-)

diff --git a/arch/arm/boards/omap/board-beagle.c b/arch/arm/boards/omap/board-beagle.c
index adf0b94..8f868ad 100644
--- a/arch/arm/boards/omap/board-beagle.c
+++ b/arch/arm/boards/omap/board-beagle.c
@@ -242,14 +242,6 @@ static struct NS16550_plat serial_plat = {
 	.reg_write = omap_uart_write,
 };
 
-static struct device_d beagle_serial_device = {
-	.id = -1,
-	.name = "serial_ns16550",
-	.map_base = OMAP_UART3_BASE,
-	.size = 1024,
-	.platform_data = (void *)&serial_plat,
-};
-
 /**
  * @brief UART serial port initialization - remember to enable COM clocks in
  * arch
@@ -259,7 +251,8 @@ static struct device_d beagle_serial_device = {
 static int beagle_console_init(void)
 {
 	/* Register the serial port */
-	return register_device(&beagle_serial_device);
+	return !!add_generic_device("serial_ns16550", -1, NULL, OMAP_UART3_BASE, 1024,
+			   IORESOURCE_MEM, &serial_plat);
 }
 console_initcall(beagle_console_init);
 #endif /* CONFIG_DRIVER_SERIAL_NS16550 */
@@ -280,25 +273,12 @@ static struct ehci_platform_data ehci_pdata = {
 };
 #endif /* CONFIG_USB_EHCI_OMAP */
 
-static struct device_d i2c_dev = {
-	.id		= -1,
-	.name		= "i2c-omap",
-	.map_base	= OMAP_I2C1_BASE,
-};
-
 static struct i2c_board_info i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("twl4030", 0x48),
 	},
 };
 
-static struct device_d hsmmc_dev = {
-	.id = -1,
-	.name = "omap-hsmmc",
-	.map_base = 0x4809C000,
-	.size = SZ_4K,
-};
-
 static int beagle_devices_init(void)
 {
 	struct device_d *sdram_dev;
@@ -310,7 +290,8 @@ static int beagle_devices_init(void)
 	armlinux_add_dram(sdram_dev);
 
 	i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
-	register_device(&i2c_dev);
+	add_generic_device("i2c-omap", -1, NULL, 0x4809C000, SZ_4K,
+			   IORESOURCE_MEM, NULL);
 
 #ifdef CONFIG_USB_EHCI_OMAP
 	if (ehci_omap_init(&omap_ehci_pdata) >= 0)
@@ -323,7 +304,8 @@ static int beagle_devices_init(void)
 #endif
 	gpmc_generic_nand_devices_init(0, 16, OMAP_ECC_HAMMING_CODE_HW_ROMCODE);
 
-	register_device(&hsmmc_dev);
+	add_generic_device("omap-hsmmc", -1, NULL, OMAP_I2C1_BASE, 0,
+			   IORESOURCE_MEM, NULL);
 
 	armlinux_set_bootparams((void *)0x80000100);
 	armlinux_set_architecture(MACH_TYPE_OMAP3_BEAGLE);
diff --git a/arch/arm/boards/omap/board-sdp343x.c b/arch/arm/boards/omap/board-sdp343x.c
index 04aa302..360766a 100644
--- a/arch/arm/boards/omap/board-sdp343x.c
+++ b/arch/arm/boards/omap/board-sdp343x.c
@@ -647,7 +647,6 @@ static int sdp3430_flash_init(void)
 static int sdp3430_devices_init(void)
 {
 	struct device_d *sdram_dev;
-	int ret;
 
 	sdram_dev = add_mem_device("ram0", 0x80000000, 128 * 1024 * 1024,
 				   IORESOURCE_MEM_WRITEABLE);
diff --git a/arch/arm/mach-omap/devices-gpmc-nand.c b/arch/arm/mach-omap/devices-gpmc-nand.c
index c2a2b0d..bf409a7 100644
--- a/arch/arm/mach-omap/devices-gpmc-nand.c
+++ b/arch/arm/mach-omap/devices-gpmc-nand.c
@@ -70,15 +70,6 @@ static struct gpmc_nand_platform_data nand_plat = {
 	.priv = (void *)&nand_cfg,
 };
 
-/** NAND device definition */
-static struct device_d gpmc_generic_nand_nand_device = {
-	.id = -1,
-	.name = "gpmc_nand",
-	.map_base = OMAP_GPMC_BASE,
-	.size = 1024 * 4,	/* GPMC size */
-	.platform_data = (void *)&nand_plat,
-};
-
 /**
  * @brief gpmc_generic_nand_devices_init - init generic nand device
  *
@@ -99,5 +90,7 @@ int gpmc_generic_nand_devices_init(int cs, int width,
 
 	/* Configure GPMC CS before register */
 	gpmc_cs_config(nand_plat.cs, &nand_cfg);
-	return register_device(&gpmc_generic_nand_nand_device);
+
+	return !!add_generic_device("gpmc_nand", -1, NULL, OMAP_GPMC_BASE, 1024 * 4,
+			   IORESOURCE_MEM, &nand_plat);
 }
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 06/23] resource: introduce add_usb_ehci_device to register echi device

[Jean-Christophe PLAGNIOL-VILLARD]

pass the hccr and hcor register base via resource

instroduce add_generic_usb_echi_device with hccr = base + 0x100 and
hcor = base + 0x140

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/chumby_falconwing/falconwing.c    |   17 +--------------
 arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c |    8 +------
 arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c |    9 +-------
 arch/arm/boards/freescale-mx25-3-stack/3stack.c   |    9 +-------
 arch/arm/boards/guf-neso/board.c                  |   10 +--------
 arch/arm/boards/omap/board-beagle.c               |   13 +----------
 arch/arm/boards/panda/board.c                     |   18 ++++++----------
 arch/arm/boards/pcm037/pcm037.c                   |   18 +---------------
 arch/arm/boards/pcm038/pcm038.c                   |    9 +-------
 arch/arm/boards/phycard-i.MX27/pca100.c           |   18 +---------------
 drivers/base/resource.c                           |   21 ++++++++++++++++++++
 drivers/usb/host/ehci-hcd.c                       |   22 +++++++++++---------
 include/driver.h                                  |   17 ++++++++++++++++
 13 files changed, 70 insertions(+), 119 deletions(-)

diff --git a/arch/arm/boards/chumby_falconwing/falconwing.c b/arch/arm/boards/chumby_falconwing/falconwing.c
index 7a5f37e..5875955 100644
--- a/arch/arm/boards/chumby_falconwing/falconwing.c
+++ b/arch/arm/boards/chumby_falconwing/falconwing.c
@@ -327,20 +327,6 @@ static int register_persistant_environment(void)
 	return devfs_add_partition("disk0.1", 0, cdev->size, DEVFS_PARTITION_FIXED, "env0");
 }
 
-static struct ehci_platform_data chumby_usb_pdata = {
-	.flags = EHCI_HAS_TT,
-	.hccr_offset = 0x100,
-	.hcor_offset = 0x140,
-};
-
-static struct device_d usb_dev = {
-	.name		= "ehci",
-	.id		= -1,
-	.map_base	= IMX_USB_BASE,
-	.size		= 0x200,
-	.platform_data	= &chumby_usb_pdata,
-};
-
 #define GPIO_USB_HUB_RESET	29
 #define GPIO_USB_HUB_POWER	26
 
@@ -353,7 +339,8 @@ static void falconwing_init_usb(void)
 	gpio_direction_output(GPIO_USB_HUB_RESET, 1);
 
 	imx_usb_phy_enable();
-	register_device(&usb_dev);
+
+	add_generic_usb_ehci_device(-1, IMX_USB_BASE, NULL);
 }
 
 static int falconwing_devices_init(void)
diff --git a/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c b/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
index d797846..ecb5a38 100644
--- a/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
+++ b/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
@@ -149,12 +149,6 @@ static void imx25_usb_init(void)
 	writel(tmp | 0x3, IMX_OTG_BASE + 0x5a8);
 }
 
-static struct device_d usbh2_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = IMX_OTG_BASE + 0x400,
-	.size     = 0x200,
-};
 #endif
 
 static struct fsl_usb2_platform_data usb_pdata = {
@@ -284,7 +278,7 @@ static int eukrea_cpuimx25_devices_init(void)
 
 #ifdef CONFIG_USB
 	imx25_usb_init();
-	register_device(&usbh2_dev);
+	add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
 #endif
 	register_device(&usbotg_dev);
 
diff --git a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
index 7f941cc..c1fe144 100644
--- a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
+++ b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
@@ -117,13 +117,6 @@ static void imx35_usb_init(void)
 	tmp = readl(IMX_OTG_BASE + 0x5a8);
 	writel(tmp | 0x3, IMX_OTG_BASE + 0x5a8);
 }
-
-static struct device_d usbh2_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = IMX_OTG_BASE + 0x400,
-	.size     = 0x200,
-};
 #endif
 
 #ifdef CONFIG_USB_GADGET
@@ -183,7 +176,7 @@ static int eukrea_cpuimx35_devices_init(void)
 
 #ifdef CONFIG_USB
 	imx35_usb_init();
-	register_device(&usbh2_dev);
+	add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
 #endif
 #ifdef CONFIG_USB_GADGET
 	/* Workaround ENGcm09152 */
diff --git a/arch/arm/boards/freescale-mx25-3-stack/3stack.c b/arch/arm/boards/freescale-mx25-3-stack/3stack.c
index f71cb4b..3902ccf 100644
--- a/arch/arm/boards/freescale-mx25-3-stack/3stack.c
+++ b/arch/arm/boards/freescale-mx25-3-stack/3stack.c
@@ -138,13 +138,6 @@ static void imx25_usb_init(void)
 	tmp = readl(IMX_OTG_BASE + 0x5a8);
 	writel(tmp | 0x3, IMX_OTG_BASE + 0x5a8);
 }
-
-static struct device_d usbh2_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = IMX_OTG_BASE + 0x400,
-	.size     = 0x200,
-};
 #endif
 
 static struct i2c_board_info i2c_devices[] = {
@@ -208,7 +201,7 @@ static int imx25_devices_init(void)
 	 * the CPLD has to be initialized.
 	 */
 	imx25_usb_init();
-	register_device(&usbh2_dev);
+	add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
 #endif
 
 	imx25_iim_register_fec_ethaddr();
diff --git a/arch/arm/boards/guf-neso/board.c b/arch/arm/boards/guf-neso/board.c
index 4e0ac90..f3a4635 100644
--- a/arch/arm/boards/guf-neso/board.c
+++ b/arch/arm/boards/guf-neso/board.c
@@ -114,14 +114,6 @@ static struct imx_fb_platform_data neso_fb_data = {
 };
 
 #ifdef CONFIG_USB
-
-static struct device_d usbh2_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = IMX_OTG_BASE + 0x400,
-	.size     = 0x200,
-};
-
 static void neso_usbh_init(void)
 {
 	uint32_t temp;
@@ -304,7 +296,7 @@ static int neso_devices_init(void)
 
 #ifdef CONFIG_USB
 	neso_usbh_init();
-	register_device(&usbh2_dev);
+	add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
 #endif
 
 	imx27_add_fec(&fec_info);
diff --git a/arch/arm/boards/omap/board-beagle.c b/arch/arm/boards/omap/board-beagle.c
index 191496a..dcf2d72 100644
--- a/arch/arm/boards/omap/board-beagle.c
+++ b/arch/arm/boards/omap/board-beagle.c
@@ -271,16 +271,6 @@ static struct omap_hcd omap_ehci_pdata = {
 
 static struct ehci_platform_data ehci_pdata = {
 	.flags = 0,
-	.hccr_offset = 0x100,
-	.hcor_offset = 0x110,
-};
-
-static struct device_d usbh_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = 0x48064700,
-	.size     = 4 * 1024,
-	.platform_data = &ehci_pdata,
 };
 #endif /* CONFIG_USB_EHCI_OMAP */
 
@@ -318,7 +308,8 @@ static int beagle_devices_init(void)
 
 #ifdef CONFIG_USB_EHCI_OMAP
 	if (ehci_omap_init(&omap_ehci_pdata) >= 0)
-		register_device(&usbh_dev);
+		add_usb_ehci_device(-1, 0x48064700 + 0x100,
+				    0x48064700 + 0x110, &ehci_pdata);
 #endif /* CONFIG_USB_EHCI_OMAP */
 #ifdef CONFIG_GPMC
 	/* WP is made high and WAIT1 active Low */
diff --git a/arch/arm/boards/panda/board.c b/arch/arm/boards/panda/board.c
index 1c6cf58..de43ca5 100644
--- a/arch/arm/boards/panda/board.c
+++ b/arch/arm/boards/panda/board.c
@@ -61,18 +61,9 @@ static int panda_mmu_init(void)
 device_initcall(panda_mmu_init);
 #endif
 
+#ifdef CONFIG_USB_EHCI
 static struct ehci_platform_data ehci_pdata = {
 	.flags = 0,
-	.hccr_offset = 0x0,
-	.hcor_offset = 0x10,
-};
-
-static struct device_d usbh_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = 0x4a064c00,
-	.size     = 4 * 1024,
-	.platform_data = &ehci_pdata,
 };
 
 static void panda_ehci_init(void)
@@ -105,8 +96,13 @@ static void panda_ehci_init(void)
 	/* enable power to hub */
 	gpio_set_value(GPIO_HUB_POWER, 1);
 
-	register_device(&usbh_dev);
+	add_usb_ehci_device(-1, 0x4a064c00,
+			    0x4a064c00 + 0x10, &ehci_pdata);
 }
+#else
+static void panda_ehci_init(void)
+{}
+#endif
 
 static void __init panda_boardrev_init(void)
 {
diff --git a/arch/arm/boards/pcm037/pcm037.c b/arch/arm/boards/pcm037/pcm037.c
index 446add8..f4b4444 100644
--- a/arch/arm/boards/pcm037/pcm037.c
+++ b/arch/arm/boards/pcm037/pcm037.c
@@ -58,20 +58,6 @@ struct imx_nand_platform_data nand_info = {
 };
 
 #ifdef CONFIG_USB
-static struct device_d usbotg_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = IMX_OTG_BASE,
-	.size     = 0x200,
-};
-
-static struct device_d usbh2_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = IMX_OTG_BASE + 0x400,
-	.size     = 0x200,
-};
-
 static void pcm037_usb_init(void)
 {
 	u32 tmp;
@@ -245,8 +231,8 @@ static int imx31_devices_init(void)
 #endif
 #ifdef CONFIG_USB
 	pcm037_usb_init();
-	register_device(&usbotg_dev);
-	register_device(&usbh2_dev);
+	add_generic_usb_ehci_device(-1, IMX_OTG_BASE, NULL);
+	add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
 #endif
 
 	armlinux_set_bootparams((void *)0x80000100);
diff --git a/arch/arm/boards/pcm038/pcm038.c b/arch/arm/boards/pcm038/pcm038.c
index 2f87b12..02c3dba 100644
--- a/arch/arm/boards/pcm038/pcm038.c
+++ b/arch/arm/boards/pcm038/pcm038.c
@@ -109,13 +109,6 @@ static struct imx_fb_platform_data pcm038_fb_data = {
 };
 
 #ifdef CONFIG_USB
-static struct device_d usbh2_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = IMX_OTG_BASE + 0x400,
-	.size     = 0x200,
-};
-
 static void pcm038_usbh_init(void)
 {
 	uint32_t temp;
@@ -271,7 +264,7 @@ static int pcm038_devices_init(void)
 
 #ifdef CONFIG_USB
 	pcm038_usbh_init();
-	register_device(&usbh2_dev);
+	add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
 #endif
 
 	/* Register the fec device after the PLL re-initialisation
diff --git a/arch/arm/boards/phycard-i.MX27/pca100.c b/arch/arm/boards/phycard-i.MX27/pca100.c
index 74af774..9a10a9d 100644
--- a/arch/arm/boards/phycard-i.MX27/pca100.c
+++ b/arch/arm/boards/phycard-i.MX27/pca100.c
@@ -53,20 +53,6 @@ struct imx_nand_platform_data nand_info = {
 };
 
 #ifdef CONFIG_USB
-static struct device_d usbotg_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = IMX_OTG_BASE,
-	.size     = 0x200,
-};
-
-static struct device_d usbh2_dev = {
-	.id	  = -1,
-	.name     = "ehci",
-	.map_base = IMX_OTG_BASE + 0x400,
-	.size     = 0x200,
-};
-
 static void pca100_usb_register(void)
 {
 	mdelay(10);
@@ -77,9 +63,9 @@ static void pca100_usb_register(void)
 	mdelay(10);
 
 	isp1504_set_vbus_power((void *)(IMX_OTG_BASE + 0x170), 1);
-	register_device(&usbotg_dev);
+	add_generic_usb_ehci_device(-1, IMX_OTG_BASE, NULL);
 	isp1504_set_vbus_power((void *)(IMX_OTG_BASE + 0x570), 1);
-	register_device(&usbh2_dev);
+	add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
 }
 #endif
 
diff --git a/drivers/base/resource.c b/drivers/base/resource.c
index 98fc68a..5fc705f 100644
--- a/drivers/base/resource.c
+++ b/drivers/base/resource.c
@@ -97,3 +97,24 @@ struct device_d *add_dm9000_device(int id, resource_size_t base,
 }
 EXPORT_SYMBOL(add_dm9000_device);
 #endif
+
+#ifdef CONFIG_USB_EHCI
+struct device_d *add_usb_ehci_device(int id, resource_size_t hccr,
+		resource_size_t hcor, void *pdata)
+{
+	struct device_d *dev;
+
+	dev = alloc_device("ehci", id, pdata);
+	dev->resource = xzalloc(sizeof(struct resource) * 2);
+	dev->num_resources = 2;
+	dev->resource[0].start = hccr;
+	dev->resource[0].flags = IORESOURCE_MEM;
+	dev->resource[1].start = hcor;
+	dev->resource[1].flags = IORESOURCE_MEM;
+
+	register_device(dev);
+
+	return dev;
+}
+EXPORT_SYMBOL(add_usb_ehci_device);
+#endif
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 844dc1d..60fc181 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -900,20 +900,22 @@ static int ehci_probe(struct device_d *dev)
 	host = &ehci->host;
 	dev->priv = ehci;
 
-	if (pdata) {
+	/* default to EHCI_HAS_TT to not change behaviour of boards
+	 * without platform_data
+	 */
+	if (pdata)
 		ehci->flags = pdata->flags;
-		ehci->hccr = (void *)(dev->map_base + pdata->hccr_offset);
-		ehci->hcor = (void *)(dev->map_base + pdata->hcor_offset);
-	}
-	else {
-		/* default to EHCI_HAS_TT to not change behaviour of boards
-		 * with platform_data
-		 */
+	else
 		ehci->flags = EHCI_HAS_TT;
-		ehci->hccr = (void *)(dev->map_base + 0x100);
-		ehci->hcor = (void *)(dev->map_base + 0x140);
+
+	if (dev->num_resources < 2) {
+		printf("echi: need 2 resources base and data");
+		return -ENODEV;
 	}
 
+	ehci->hccr = dev_request_mem_region(dev, 0);
+	ehci->hcor = dev_request_mem_region(dev, 1);
+
 	host->init = ehci_init;
 	host->submit_int_msg = submit_int_msg;
 	host->submit_control_msg = submit_control_msg;
diff --git a/include/driver.h b/include/driver.h
index 38c0bca..baf8d88 100644
--- a/include/driver.h
+++ b/include/driver.h
@@ -246,6 +246,23 @@ static inline struct device_d *add_dm9000_device(int id, resource_size_t base,
 }
 #endif
 
+#ifdef CONFIG_USB_EHCI
+struct device_d *add_usb_ehci_device(int id, resource_size_t hccr,
+		resource_size_t hcor, void *pdata);
+#else
+static inline struct device_d *add_usb_ehci_device(int id, resource_size_t hccr,
+		resource_size_t hcor, void *pdata)
+{
+	return NULL;
+}
+#endif
+
+static inline struct device_d *add_generic_usb_ehci_device(int id,
+		resource_size_t base, void *pdata)
+{
+	return add_usb_ehci_device(id, base + 0x100, base + 0x140, pdata);
+}
+
 /* linear list over all available devices
  */
 extern struct list_head device_list;
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 7/7] fb: switch to "struct resource"

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/video/fb.c  |   16 ++++++++++------
 drivers/video/s3c.c |   16 +++++++++-------
 drivers/video/stm.c |    2 +-
 3 files changed, 20 insertions(+), 14 deletions(-)

diff --git a/drivers/video/fb.c b/drivers/video/fb.c
index 85db904..0be465f 100644
--- a/drivers/video/fb.c
+++ b/drivers/video/fb.c
@@ -84,9 +84,9 @@ static int fb_setup_mode(struct device_d *dev, struct param_d *param,
 	ret = info->fbops->fb_activate_var(info);
 
 	if (!ret) {
-		dev->map_base = (unsigned long)info->screen_base;
+		dev->resource[0].start = (resource_size_t)info->screen_base;
 		info->cdev.size = info->xres * info->yres * (info->bits_per_pixel >> 3);
-		dev->size = info->cdev.size;
+		dev->resource[0].size = info->cdev.size;
 		dev_param_set_generic(dev, param, val);
 	} else
 		info->cdev.size = 0;
@@ -107,15 +107,19 @@ int register_framebuffer(struct fb_info *info)
 	int id = get_free_deviceid("fb");
 	struct device_d *dev;
 
+	dev = &info->dev;
+
 	info->cdev.ops = &fb_ops;
 	info->cdev.name = asprintf("fb%d", id);
 	info->cdev.size = info->xres * info->yres * (info->bits_per_pixel >> 3);
-	info->cdev.dev = &info->dev;
+	info->cdev.dev = dev;
 	info->cdev.priv = info;
-	info->cdev.dev->map_base = (unsigned long)info->screen_base;
-	info->cdev.dev->size = info->cdev.size;
+	dev->resource = xzalloc(sizeof(struct resource));
+	dev->resource[0].start = (resource_size_t)info->screen_base;
+	dev->resource[0].size = info->cdev.size;
+	dev->resource[0].flags = IORESOURCE_MEM;
+	dev->num_resources = 1;
 
-	dev = &info->dev;
 	dev->priv = info;
 	dev->id = id;
 
diff --git a/drivers/video/s3c.c b/drivers/video/s3c.c
index 3715499..d079fde 100644
--- a/drivers/video/s3c.c
+++ b/drivers/video/s3c.c
@@ -331,11 +331,12 @@ static int s3cfb_activate_var(struct fb_info *fb_info)
 static void s3cfb_info(struct device_d *hw_dev)
 {
 	uint32_t con1, addr1, addr2, addr3;
+	struct s3cfb_info *fbi = hw_dev->priv;
 
-	con1 = readl(hw_dev->map_base + LCDCON1);
-	addr1 = readl(hw_dev->map_base + LCDSADDR1);
-	addr2 = readl(hw_dev->map_base + LCDSADDR2);
-	addr3 = readl(hw_dev->map_base + LCDSADDR3);
+	con1 = readl(fbi->base + LCDCON1);
+	addr1 = readl(fbi->base + LCDSADDR1);
+	addr2 = readl(fbi->base + LCDSADDR2);
+	addr3 = readl(fbi->base + LCDSADDR3);
 
 	printf(" Video hardware info:\n");
 	printf("  Video clock is running at %u Hz\n", s3c24xx_get_hclk() / ((GET_CLKVAL(con1) + 1) * 2));
@@ -371,15 +372,16 @@ static int s3cfb_probe(struct device_d *hw_dev)
 	if (! pdata)
 		return -ENODEV;
 
-	writel(0, hw_dev->map_base + LCDCON1);
-	writel(0, hw_dev->map_base + LCDCON5); /* FIXME not 0 for some displays */
+	fbi.base = dev_request_mem_region(hw_dev, 0);
+	writel(0, fbi.base + LCDCON1);
+	writel(0, fbi.base + LCDCON5); /* FIXME not 0 for some displays */
 
 	/* just init */
 	fbi.info.priv = &fbi;
 
 	/* add runtime hardware info */
 	fbi.hw_dev = hw_dev;
-	fbi.base = (void*)hw_dev->map_base;
+	hw_dev->priv = &fbi;
 
 	/* add runtime video info */
 	fbi.info.mode_list = pdata->mode_list;
diff --git a/drivers/video/stm.c b/drivers/video/stm.c
index ee2f026..78acad7 100644
--- a/drivers/video/stm.c
+++ b/drivers/video/stm.c
@@ -488,7 +488,7 @@ static int stmfb_probe(struct device_d *hw_dev)
 
 	/* add runtime hardware info */
 	fbi.hw_dev = hw_dev;
-	fbi.base = (void *)hw_dev->map_base;
+	fbi.base = dev_request_mem_region(hw_dev, 0);
 	fbi.pdata = pdata;
 
 	/* add runtime video info */
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 07/23] omap: switch to add_generic_device

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/omap/board-beagle.c    |   19 ++++---------------
 arch/arm/boards/omap/board-sdp343x.c   |    1 -
 arch/arm/boards/panda/board.c          |   10 ++--------
 arch/arm/boards/pcm049/board.c         |   20 ++++----------------
 arch/arm/mach-omap/devices-gpmc-nand.c |   13 +++----------
 5 files changed, 13 insertions(+), 50 deletions(-)

diff --git a/arch/arm/boards/omap/board-beagle.c b/arch/arm/boards/omap/board-beagle.c
index dcf2d72..899c34b 100644
--- a/arch/arm/boards/omap/board-beagle.c
+++ b/arch/arm/boards/omap/board-beagle.c
@@ -274,25 +274,12 @@ static struct ehci_platform_data ehci_pdata = {
 };
 #endif /* CONFIG_USB_EHCI_OMAP */
 
-static struct device_d i2c_dev = {
-	.id		= -1,
-	.name		= "i2c-omap",
-	.map_base	= OMAP_I2C1_BASE,
-};
-
 static struct i2c_board_info i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("twl4030", 0x48),
 	},
 };
 
-static struct device_d hsmmc_dev = {
-	.id = -1,
-	.name = "omap-hsmmc",
-	.map_base = 0x4809C000,
-	.size = SZ_4K,
-};
-
 static int beagle_devices_init(void)
 {
 	struct device_d *sdram_dev;
@@ -304,7 +291,8 @@ static int beagle_devices_init(void)
 	armlinux_add_dram(sdram_dev);
 
 	i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
-	register_device(&i2c_dev);
+	add_generic_device("i2c-omap", -1, NULL, 0x4809C000, SZ_4K,
+			   IORESOURCE_MEM, NULL);
 
 #ifdef CONFIG_USB_EHCI_OMAP
 	if (ehci_omap_init(&omap_ehci_pdata) >= 0)
@@ -317,7 +305,8 @@ static int beagle_devices_init(void)
 #endif
 	gpmc_generic_nand_devices_init(0, 16, OMAP_ECC_HAMMING_CODE_HW_ROMCODE);
 
-	register_device(&hsmmc_dev);
+	add_generic_device("omap-hsmmc", -1, NULL, OMAP_I2C1_BASE, 0,
+			   IORESOURCE_MEM, NULL);
 
 	armlinux_set_bootparams((void *)0x80000100);
 	armlinux_set_architecture(MACH_TYPE_OMAP3_BEAGLE);
diff --git a/arch/arm/boards/omap/board-sdp343x.c b/arch/arm/boards/omap/board-sdp343x.c
index 8e8d952..010fbd7 100644
--- a/arch/arm/boards/omap/board-sdp343x.c
+++ b/arch/arm/boards/omap/board-sdp343x.c
@@ -641,7 +641,6 @@ static int sdp3430_flash_init(void)
 static int sdp3430_devices_init(void)
 {
 	struct device_d *sdram_dev;
-	int ret;
 
 	sdram_dev = add_mem_device("ram0", 0x80000000, 128 * 1024 * 1024,
 				   IORESOURCE_MEM_WRITEABLE);
diff --git a/arch/arm/boards/panda/board.c b/arch/arm/boards/panda/board.c
index de43ca5..4c9d8ee 100644
--- a/arch/arm/boards/panda/board.c
+++ b/arch/arm/boards/panda/board.c
@@ -113,13 +113,6 @@ static void __init panda_boardrev_init(void)
 	pr_info("PandaBoard Revision: %03d\n", board_revision);
 }
 
-static struct device_d hsmmc_dev = {
-	.id = -1,
-	.name = "omap-hsmmc",
-	.map_base = 0x4809C100,
-	.size = SZ_4K,
-};
-
 static int panda_devices_init(void)
 {
 	struct device_d *sdram_dev;
@@ -153,7 +146,8 @@ static int panda_devices_init(void)
 	sdram_dev = add_mem_device("ram0", 0x80000000, SZ_1G,
 				   IORESOURCE_MEM_WRITEABLE);
 	armlinux_add_dram(sdram_dev);
-	register_device(&hsmmc_dev);
+	add_generic_device("omap-hsmmc", -1, NULL, 0x4809C100, SZ_4K,
+			   IORESOURCE_MEM, NULL);
 	panda_ehci_init();
 
 	armlinux_set_bootparams((void *)0x80000100);
diff --git a/arch/arm/boards/pcm049/board.c b/arch/arm/boards/pcm049/board.c
index 7eae2cf..ec0d0b8 100644
--- a/arch/arm/boards/pcm049/board.c
+++ b/arch/arm/boards/pcm049/board.c
@@ -73,20 +73,6 @@ static int pcm049_mmu_init(void)
 device_initcall(pcm049_mmu_init);
 #endif
 
-static struct device_d hsmmc_dev = {
-	.id = -1,
-	.name = "omap-hsmmc",
-	.map_base = 0x4809C100,
-	.size = SZ_4K,
-};
-
-static struct device_d smc911x_dev = {
-	.id		= -1,
-	.name		= "smc911x",
-	.map_base	= 0x2C000000,
-	.size		= 0x4000,
-};
-
 static struct gpmc_config net_cfg = {
 	.cfg = {
 		0x00001000,	/* CONF1 */
@@ -104,7 +90,8 @@ static void pcm049_network_init(void)
 {
 	gpmc_cs_config(5, &net_cfg);
 
-	register_device(&smc911x_dev);
+	add_generic_device("smc911x", -1, NULL, 0x2C000000, 0x4000,
+			   IORESOURCE_MEM, NULL);
 }
 
 static int pcm049_devices_init(void)
@@ -116,7 +103,8 @@ static int pcm049_devices_init(void)
 	armlinux_add_dram(sdram_dev);
 	add_mem_device("ram0", 0x40300000, 48 * 1024,
 				   IORESOURCE_MEM_WRITEABLE);
-	register_device(&hsmmc_dev);
+	add_generic_device("omap-hsmmc", -1, NULL, 0x4809C100, SZ_4K,
+			   IORESOURCE_MEM, NULL);
 
 	gpmc_generic_init(0x10);
 
diff --git a/arch/arm/mach-omap/devices-gpmc-nand.c b/arch/arm/mach-omap/devices-gpmc-nand.c
index c2a2b0d..bf409a7 100644
--- a/arch/arm/mach-omap/devices-gpmc-nand.c
+++ b/arch/arm/mach-omap/devices-gpmc-nand.c
@@ -70,15 +70,6 @@ static struct gpmc_nand_platform_data nand_plat = {
 	.priv = (void *)&nand_cfg,
 };
 
-/** NAND device definition */
-static struct device_d gpmc_generic_nand_nand_device = {
-	.id = -1,
-	.name = "gpmc_nand",
-	.map_base = OMAP_GPMC_BASE,
-	.size = 1024 * 4,	/* GPMC size */
-	.platform_data = (void *)&nand_plat,
-};
-
 /**
  * @brief gpmc_generic_nand_devices_init - init generic nand device
  *
@@ -99,5 +90,7 @@ int gpmc_generic_nand_devices_init(int cs, int width,
 
 	/* Configure GPMC CS before register */
 	gpmc_cs_config(nand_plat.cs, &nand_cfg);
-	return register_device(&gpmc_generic_nand_nand_device);
+
+	return !!add_generic_device("gpmc_nand", -1, NULL, OMAP_GPMC_BASE, 1024 * 4,
+			   IORESOURCE_MEM, &nand_plat);
 }
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 08/23] fb: switch to "struct resource"

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/video/fb.c  |   16 ++++++++++------
 drivers/video/s3c.c |   16 +++++++++-------
 drivers/video/stm.c |    2 +-
 3 files changed, 20 insertions(+), 14 deletions(-)

diff --git a/drivers/video/fb.c b/drivers/video/fb.c
index 85db904..0be465f 100644
--- a/drivers/video/fb.c
+++ b/drivers/video/fb.c
@@ -84,9 +84,9 @@ static int fb_setup_mode(struct device_d *dev, struct param_d *param,
 	ret = info->fbops->fb_activate_var(info);
 
 	if (!ret) {
-		dev->map_base = (unsigned long)info->screen_base;
+		dev->resource[0].start = (resource_size_t)info->screen_base;
 		info->cdev.size = info->xres * info->yres * (info->bits_per_pixel >> 3);
-		dev->size = info->cdev.size;
+		dev->resource[0].size = info->cdev.size;
 		dev_param_set_generic(dev, param, val);
 	} else
 		info->cdev.size = 0;
@@ -107,15 +107,19 @@ int register_framebuffer(struct fb_info *info)
 	int id = get_free_deviceid("fb");
 	struct device_d *dev;
 
+	dev = &info->dev;
+
 	info->cdev.ops = &fb_ops;
 	info->cdev.name = asprintf("fb%d", id);
 	info->cdev.size = info->xres * info->yres * (info->bits_per_pixel >> 3);
-	info->cdev.dev = &info->dev;
+	info->cdev.dev = dev;
 	info->cdev.priv = info;
-	info->cdev.dev->map_base = (unsigned long)info->screen_base;
-	info->cdev.dev->size = info->cdev.size;
+	dev->resource = xzalloc(sizeof(struct resource));
+	dev->resource[0].start = (resource_size_t)info->screen_base;
+	dev->resource[0].size = info->cdev.size;
+	dev->resource[0].flags = IORESOURCE_MEM;
+	dev->num_resources = 1;
 
-	dev = &info->dev;
 	dev->priv = info;
 	dev->id = id;
 
diff --git a/drivers/video/s3c.c b/drivers/video/s3c.c
index 3715499..d079fde 100644
--- a/drivers/video/s3c.c
+++ b/drivers/video/s3c.c
@@ -331,11 +331,12 @@ static int s3cfb_activate_var(struct fb_info *fb_info)
 static void s3cfb_info(struct device_d *hw_dev)
 {
 	uint32_t con1, addr1, addr2, addr3;
+	struct s3cfb_info *fbi = hw_dev->priv;
 
-	con1 = readl(hw_dev->map_base + LCDCON1);
-	addr1 = readl(hw_dev->map_base + LCDSADDR1);
-	addr2 = readl(hw_dev->map_base + LCDSADDR2);
-	addr3 = readl(hw_dev->map_base + LCDSADDR3);
+	con1 = readl(fbi->base + LCDCON1);
+	addr1 = readl(fbi->base + LCDSADDR1);
+	addr2 = readl(fbi->base + LCDSADDR2);
+	addr3 = readl(fbi->base + LCDSADDR3);
 
 	printf(" Video hardware info:\n");
 	printf("  Video clock is running at %u Hz\n", s3c24xx_get_hclk() / ((GET_CLKVAL(con1) + 1) * 2));
@@ -371,15 +372,16 @@ static int s3cfb_probe(struct device_d *hw_dev)
 	if (! pdata)
 		return -ENODEV;
 
-	writel(0, hw_dev->map_base + LCDCON1);
-	writel(0, hw_dev->map_base + LCDCON5); /* FIXME not 0 for some displays */
+	fbi.base = dev_request_mem_region(hw_dev, 0);
+	writel(0, fbi.base + LCDCON1);
+	writel(0, fbi.base + LCDCON5); /* FIXME not 0 for some displays */
 
 	/* just init */
 	fbi.info.priv = &fbi;
 
 	/* add runtime hardware info */
 	fbi.hw_dev = hw_dev;
-	fbi.base = (void*)hw_dev->map_base;
+	hw_dev->priv = &fbi;
 
 	/* add runtime video info */
 	fbi.info.mode_list = pdata->mode_list;
diff --git a/drivers/video/stm.c b/drivers/video/stm.c
index ee2f026..78acad7 100644
--- a/drivers/video/stm.c
+++ b/drivers/video/stm.c
@@ -488,7 +488,7 @@ static int stmfb_probe(struct device_d *hw_dev)
 
 	/* add runtime hardware info */
 	fbi.hw_dev = hw_dev;
-	fbi.base = (void *)hw_dev->map_base;
+	fbi.base = dev_request_mem_region(hw_dev, 0);
 	fbi.pdata = pdata;
 
 	/* add runtime video info */
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 09/23] cfi_flash: convert missing map_base

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/nor/cfi_flash.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/nor/cfi_flash.c b/drivers/nor/cfi_flash.c
index c995962..461b0e6 100644
--- a/drivers/nor/cfi_flash.c
+++ b/drivers/nor/cfi_flash.c
@@ -988,7 +988,7 @@ static int cfi_probe (struct device_d *dev)
 
 	if (info->flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH on Bank at 0x%08x - Size = 0x%08lx = %ld MB\n",
-			dev->map_base, info->size, info->size << 20);
+			dev->resource[0].start, info->size, info->size << 20);
 		return -ENODEV;
 	}
 
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 10/23] fsl_udc: switch to resource

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/usb/gadget/fsl_udc.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/usb/gadget/fsl_udc.c b/drivers/usb/gadget/fsl_udc.c
index 20a5064..c321e8f 100644
--- a/drivers/usb/gadget/fsl_udc.c
+++ b/drivers/usb/gadget/fsl_udc.c
@@ -2239,7 +2239,7 @@ static int fsl_udc_probe(struct device_d *dev)
 	udc_controller = xzalloc(sizeof(*udc_controller));
 	udc_controller->stopped = 1;
 
-	dr_regs = (void *)dev->map_base;
+	dr_regs = dev_request_mem_region(dev, 0);
 
 	/* Read Device Controller Capability Parameters register */
 	dccparams = readl(&dr_regs->dccparams);
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 11/23] pcm030: switch to resources

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/ppc/boards/pcm030/pcm030.c |   30 ++++++------------------------
 1 files changed, 6 insertions(+), 24 deletions(-)

diff --git a/arch/ppc/boards/pcm030/pcm030.c b/arch/ppc/boards/pcm030/pcm030.c
index 0f09d3e..ba59bfe 100644
--- a/arch/ppc/boards/pcm030/pcm030.c
+++ b/arch/ppc/boards/pcm030/pcm030.c
@@ -41,19 +41,13 @@ static struct mpc5xxx_fec_platform_data fec_info = {
 	.xcv_type = MII100,
 };
 
-struct device_d eth_dev = {
-	.id		= -1,
-	.name		= "fec_mpc5xxx",
-	.map_base	= MPC5XXX_FEC,
-	.platform_data	= &fec_info,
-};
-
 static int devices_init (void)
 {
 	add_cfi_flash_device(-1, 0xff000000, 16 * 1024 * 1024, 0);
 	add_mem_device("ram0", 0x0, 64 * 1024 * 1024,
 		       IORESOURCE_MEM_WRITEABLE);
-	register_device(&eth_dev);
+	add_generic_device("fec_mpc5xxx", -1, NULL, MPC5XXX_FEC, 0,
+			   IORESOURCE_MEM, &fec_info);
 
 	devfs_add_partition("nor0", 0x00f00000, 0x40000, PARTITION_FIXED, "self0");
 	devfs_add_partition("nor0", 0x00f60000, 0x20000, PARTITION_FIXED, "env0");
@@ -63,24 +57,12 @@ static int devices_init (void)
 
 device_initcall(devices_init);
 
-static struct device_d psc3 = {
-	.id	  = -1,
-	.name     = "mpc5xxx_serial",
-	.map_base = MPC5XXX_PSC3,
-	.size     = 4096,
-};
-
-static struct device_d psc6 = {
-	.id	  = -1,
-	.name     = "mpc5xxx_serial",
-	.map_base = MPC5XXX_PSC6,
-	.size     = 4096,
-};
-
 static int console_init(void)
 {
-	register_device(&psc3);
-	register_device(&psc6);
+	add_generic_device("mpc5xxx_serial", -1, NULL, MPC5XXX_PSC3, 4096,
+			   IORESOURCE_MEM, NULL);
+	add_generic_device("mpc5xxx_serial", -1, NULL, MPC5XXX_PSC6, 4096,
+			   IORESOURCE_MEM, NULL);
 	return 0;
 }
 
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 12/23] ipe337: switch to resources

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/blackfin/boards/ipe337/ipe337.c |   20 ++++----------------
 1 files changed, 4 insertions(+), 16 deletions(-)

diff --git a/arch/blackfin/boards/ipe337/ipe337.c b/arch/blackfin/boards/ipe337/ipe337.c
index 4430f3b..ee642d1 100644
--- a/arch/blackfin/boards/ipe337/ipe337.c
+++ b/arch/blackfin/boards/ipe337/ipe337.c
@@ -5,13 +5,6 @@
 #include <partition.h>
 #include <fs.h>
 
-static struct device_d smc911x_dev = {
-	.id	  = -1,
-	.name     = "smc911x",
-	.map_base = 0x24000000,
-	.size     = 4096,
-};
-
 static int ipe337_devices_init(void) {
 	add_cfi_flash_device(-1, 0x20000000, 32 * 1024 * 1024, 0);
 	add_mem_device("ram0", 0x0, 128 * 1024 * 1024,
@@ -23,7 +16,8 @@ static int ipe337_devices_init(void) {
 	mdelay(100);
 	*pFIO0_FLAG_S = (1<<12);
 
-	register_device(&smc911x_dev);
+	add_generic_device("smc911x", -1, NULL, 0x24000000, 4096,
+			   IORESOURCE_MEM, NULL);
 
 	devfs_add_partition("nor0", 0x00000, 0x20000, PARTITION_FIXED, "self0");
 	devfs_add_partition("nor0", 0x20000, 0x20000, PARTITION_FIXED, "env0");
@@ -35,16 +29,10 @@ static int ipe337_devices_init(void) {
 
 device_initcall(ipe337_devices_init);
 
-static struct device_d blackfin_serial_device = {
-	.id	  = -1,
-	.name     = "blackfin_serial",
-	.map_base = 0,
-	.size     = 4096,
-};
-
 static int blackfin_console_init(void)
 {
-	register_device(&blackfin_serial_device);
+	add_generic_device("blackfin_serial", -1, NULL, 0, 4096,
+			   IORESOURCE_MEM, NULL);
 
 	return 0;
 }
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 13/23] s3c/boards: switch to resources

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/a9m2410/a9m2410.c   |   40 +++++++++-------------------------
 arch/arm/boards/a9m2440/a9m2440.c   |   40 +++++++++-------------------------
 arch/arm/boards/mini2440/mini2440.c |   36 +++++++------------------------
 3 files changed, 30 insertions(+), 86 deletions(-)

diff --git a/arch/arm/boards/a9m2410/a9m2410.c b/arch/arm/boards/a9m2410/a9m2410.c
index 54012d9..64fabd2 100644
--- a/arch/arm/boards/a9m2410/a9m2410.c
+++ b/arch/arm/boards/a9m2410/a9m2410.c
@@ -40,25 +40,6 @@ static struct s3c24x0_nand_platform_data nand_info = {
 	.nand_timing = CALC_NFCONF_TIMING(A9M2410_TACLS, A9M2410_TWRPH0, A9M2410_TWRPH1)
 };
 
-static struct device_d nand_dev = {
-	.id	  = -1,
-	.name     = "s3c24x0_nand",
-	.map_base = S3C24X0_NAND_BASE,
-	.platform_data	= &nand_info,
-};
-
-/*
- * SMSC 91C111 network controller on the baseboard
- * connected to CS line 1 and interrupt line
- * GPIO3, data width is 32 bit
- */
-static struct device_d network_dev = {
-	.id       = -1,
-        .name     = "smc91c111",
-        .map_base = CS1_BASE + 0x300,
-        .size     = 16,
-};
-
 static int a9m2410_devices_init(void)
 {
 	uint32_t reg;
@@ -141,10 +122,17 @@ static int a9m2410_devices_init(void)
 	writel(reg, MISCCR);
 
 	/* ----------- the devices the boot loader should work with -------- */
-	register_device(&nand_dev);
+	add_generic_device("s3c24x0_nand", -1, NULL, S3C24X0_NAND_BASE, 0,
+			   IORESOURCE_MEM, &nand_info);
 	sdram_dev = add_mem_device("ram0", CS6_BASE, size,
 				   IORESOURCE_MEM_WRITEABLE);
-	register_device(&network_dev);
+	/*
+	 * SMSC 91C111 network controller on the baseboard
+	 * connected to CS line 1 and interrupt line
+	 * GPIO3, data width is 32 bit
+	 */
+	add_generic_device("smc91c111", -1, NULL, CS1_BASE + 0x300, 16,
+			   IORESOURCE_MEM, NULL);
 
 #ifdef CONFIG_NAND
 	/* ----------- add some vital partitions -------- */
@@ -171,16 +159,10 @@ void __bare_init nand_boot(void)
 }
 #endif
 
-static struct device_d a9m2410_serial_device = {
-	.id       = -1,
-	.name     = "s3c24x0_serial",
-	.map_base = UART1_BASE,
-	.size     = UART1_SIZE,
-};
-
 static int a9m2410_console_init(void)
 {
-	register_device(&a9m2410_serial_device);
+	add_generic_device("s3c24x0_serial", -1, NULL, UART1_BASE, UART1_SIZE,
+			   IORESOURCE_MEM, NULL);
 	return 0;
 }
 
diff --git a/arch/arm/boards/a9m2440/a9m2440.c b/arch/arm/boards/a9m2440/a9m2440.c
index 7ea7f1c..d52f4c2 100644
--- a/arch/arm/boards/a9m2440/a9m2440.c
+++ b/arch/arm/boards/a9m2440/a9m2440.c
@@ -42,25 +42,6 @@ static struct s3c24x0_nand_platform_data nand_info = {
 	.nand_timing = CALC_NFCONF_TIMING(A9M2440_TACLS, A9M2440_TWRPH0, A9M2440_TWRPH1)
 };
 
-static struct device_d nand_dev = {
-	.id	  = -1,
-	.name     = "s3c24x0_nand",
-	.map_base = S3C24X0_NAND_BASE,
-	.platform_data	= &nand_info,
-};
-
-/*
- * cs8900 network controller onboard
- * Connected to CS line 5 + A24 and interrupt line EINT9,
- * data width is 16 bit
- */
-static struct device_d network_dev = {
-	.id	  = -1,
-	.name     = "cs8900",
-	.map_base = CS5_BASE + (1 << 24) + 0x300,
-	.size     = 16,
-};
-
 static int a9m2440_check_for_ram(uint32_t addr)
 {
 	uint32_t tmp1, tmp2;
@@ -145,10 +126,17 @@ static int a9m2440_devices_init(void)
 	writel(reg, MISCCR);
 
 	/* ----------- the devices the boot loader should work with -------- */
-	register_device(&nand_dev);
+	add_generic_device("s3c24x0_nand", -1, NULL, S3C24X0_NAND_BASE, 0,
+			   IORESOURCE_MEM, &nand_info);
 	sdram_dev = add_mem_device("ram0", CS6_BASE, s3c24x0_get_memory_size(),
 				   IORESOURCE_MEM_WRITEABLE);
-	register_device(&network_dev);
+	/*
+	 * cs8900 network controller onboard
+	 * Connected to CS line 5 + A24 and interrupt line EINT9,
+	 * data width is 16 bit
+	 */
+	add_generic_device("cs8900", -1, NULL, CS5_BASE + (1 << 24) + 0x300, 16,
+			   IORESOURCE_MEM, NULL);
 
 #ifdef CONFIG_NAND
 	/* ----------- add some vital partitions -------- */
@@ -174,16 +162,10 @@ void __bare_init nand_boot(void)
 }
 #endif
 
-static struct device_d a9m2440_serial_device = {
-	.id	  = -1,
-	.name     = "s3c24x0_serial",
-	.map_base = UART1_BASE,
-	.size     = UART1_SIZE,
-};
-
 static int a9m2440_console_init(void)
 {
-	register_device(&a9m2440_serial_device);
+	add_generic_device("s3c24x0_serial", -1, NULL, UART1_BASE, UART1_SIZE,
+			   IORESOURCE_MEM, NULL);
 	return 0;
 }
 
diff --git a/arch/arm/boards/mini2440/mini2440.c b/arch/arm/boards/mini2440/mini2440.c
index dbf7503..c6b4932 100644
--- a/arch/arm/boards/mini2440/mini2440.c
+++ b/arch/arm/boards/mini2440/mini2440.c
@@ -49,12 +49,6 @@ static struct s3c24x0_nand_platform_data nand_info = {
 	.flash_bbt = 1,	/* same as the kernel */
 };
 
-static struct device_d nand_dev = {
-	.name     = "s3c24x0_nand",
-	.map_base = S3C24X0_NAND_BASE,
-	.platform_data	= &nand_info,
-};
-
 /*
  * dm9000 network controller onboard
  * Connected to CS line 4 and interrupt line EINT7,
@@ -73,12 +67,6 @@ static struct s3c_mci_platform_data mci_data = {
 	.detect_invert = 0,
 };
 
-static struct device_d mci_dev = {
-	.name     = "s3c_mci",
-	.map_base = S3C2410_SDI_BASE,
-	.platform_data	= &mci_data,
-};
-
 static struct fb_videomode s3c24x0_fb_modes[] = {
 #ifdef CONFIG_MINI2440_VIDEO_N35
 	{
@@ -144,12 +132,6 @@ static struct s3c_fb_platform_data s3c24x0_fb_data = {
 	.passive_display	= 0,
 };
 
-static struct device_d s3cfb_dev = {
-	.name    = "s3c_fb",
-	.map_base = S3C2410_LCD_BASE,
-	.platform_data	= &s3c24x0_fb_data,
-};
-
 static const unsigned pin_usage[] = {
 	/* address bus, used by NOR, SDRAM */
 	GPA1_ADDR16,
@@ -305,7 +287,8 @@ static int mini2440_devices_init(void)
 	reg |= 0x10000;
 	writel(reg, MISCCR);
 
-	register_device(&nand_dev);
+	add_generic_device("s3c24x0_nand", -1, NULL, S3C24X0_NAND_BASE, 0,
+			   IORESOURCE_MEM, &nand_info);
 
 	sdram_dev = add_mem_device("ram0", CS6_BASE, s3c24x0_get_memory_size(),
 				   IORESOURCE_MEM_WRITEABLE);
@@ -323,8 +306,10 @@ static int mini2440_devices_init(void)
 	devfs_add_partition("nand0", 0x40000, 0x20000, PARTITION_FIXED, "env_raw");
 	dev_add_bb_dev("env_raw", "env0");
 #endif
-	register_device(&mci_dev);
-	register_device(&s3cfb_dev);
+	add_generic_device("s3c_mci", 0, NULL, S3C2410_SDI_BASE, 0,
+			   IORESOURCE_MEM, &mci_data);
+	add_generic_device("s3c_fb", 0, NULL, S3C2410_LCD_BASE, 0,
+			   IORESOURCE_MEM, &s3c24x0_fb_data);
 	armlinux_set_bootparams(dev_get_mem_region(sdram_dev, 0) + 0x100);
 	armlinux_set_architecture(MACH_TYPE_MINI2440);
 
@@ -340,12 +325,6 @@ void __bare_init nand_boot(void)
 }
 #endif
 
-static struct device_d mini2440_serial_device = {
-	.name     = "s3c24x0_serial",
-	.map_base = UART1_BASE,
-	.size     = UART1_SIZE,
-};
-
 static int mini2440_console_init(void)
 {
 	/*
@@ -357,7 +336,8 @@ static int mini2440_console_init(void)
 	s3c_gpio_mode(GPH2_TXD0);
 	s3c_gpio_mode(GPH3_RXD0);
 
-	register_device(&mini2440_serial_device);
+	add_generic_device("s3c24x0_serial", -1, NULL, UART1_BASE, UART1_SIZE,
+			   IORESOURCE_MEM, NULL);
 	return 0;
 }
 
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 14/23] ns16550: if not specific f_caps defined use default stdin, stdout, stderr

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c |    1 -
 arch/arm/boards/omap/board-beagle.c               |    1 -
 arch/arm/boards/omap/board-omap3evm.c             |    1 -
 arch/arm/boards/omap/board-sdp343x.c              |    1 -
 arch/arm/boards/panda/board.c                     |    1 -
 arch/arm/boards/pcm049/board.c                    |    1 -
 arch/x86/boards/x86_generic/generic_pc.c          |    1 -
 drivers/serial/serial_ns16550.c                   |    5 ++++-
 8 files changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
index fa910b9..65cf6d8 100644
--- a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
+++ b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
@@ -85,7 +85,6 @@ EXPORT_SYMBOL(quad_uart_write);
 
 static struct NS16550_plat quad_uart_serial_plat = {
 	.clock = 14745600,
-	.f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR,
 	.reg_read = quad_uart_read,
 	.reg_write = quad_uart_write,
 };
diff --git a/arch/arm/boards/omap/board-beagle.c b/arch/arm/boards/omap/board-beagle.c
index 899c34b..49e95d9 100644
--- a/arch/arm/boards/omap/board-beagle.c
+++ b/arch/arm/boards/omap/board-beagle.c
@@ -237,7 +237,6 @@ void board_init(void)
 
 static struct NS16550_plat serial_plat = {
 	.clock = 48000000,      /* 48MHz (APLL96/2) */
-	.f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR,
 	.reg_read = omap_uart_read,
 	.reg_write = omap_uart_write,
 };
diff --git a/arch/arm/boards/omap/board-omap3evm.c b/arch/arm/boards/omap/board-omap3evm.c
index 071e374..0c243f3 100644
--- a/arch/arm/boards/omap/board-omap3evm.c
+++ b/arch/arm/boards/omap/board-omap3evm.c
@@ -213,7 +213,6 @@ void board_init(void)
 
 static struct NS16550_plat serial_plat = {
 	.clock		= 48000000,      /* 48MHz (APLL96/2) */
-	.f_caps		= CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR,
 	.reg_read	= omap_uart_read,
 	.reg_write	= omap_uart_write,
 };
diff --git a/arch/arm/boards/omap/board-sdp343x.c b/arch/arm/boards/omap/board-sdp343x.c
index 010fbd7..36f226c 100644
--- a/arch/arm/boards/omap/board-sdp343x.c
+++ b/arch/arm/boards/omap/board-sdp343x.c
@@ -605,7 +605,6 @@ static void mux_config(void)
 
 static struct NS16550_plat serial_plat = {
 	.clock = 48000000,	/* 48MHz (APLL96/2) */
-	.f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR,
 	.reg_read = omap_uart_read,
 	.reg_write = omap_uart_write,
 };
diff --git a/arch/arm/boards/panda/board.c b/arch/arm/boards/panda/board.c
index 4c9d8ee..4164c1f 100644
--- a/arch/arm/boards/panda/board.c
+++ b/arch/arm/boards/panda/board.c
@@ -32,7 +32,6 @@ static int board_revision;
 
 static struct NS16550_plat serial_plat = {
 	.clock = 48000000,      /* 48MHz (APLL96/2) */
-	.f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR,
 	.reg_read = omap_uart_read,
 	.reg_write = omap_uart_write,
 };
diff --git a/arch/arm/boards/pcm049/board.c b/arch/arm/boards/pcm049/board.c
index ec0d0b8..d6de29b 100644
--- a/arch/arm/boards/pcm049/board.c
+++ b/arch/arm/boards/pcm049/board.c
@@ -43,7 +43,6 @@
 
 static struct NS16550_plat serial_plat = {
 	.clock = 48000000,      /* 48MHz (APLL96/2) */
-	.f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR,
 	.reg_read = omap_uart_read,
 	.reg_write = omap_uart_write,
 };
diff --git a/arch/x86/boards/x86_generic/generic_pc.c b/arch/x86/boards/x86_generic/generic_pc.c
index d031c52..b35d26f 100644
--- a/arch/x86/boards/x86_generic/generic_pc.c
+++ b/arch/x86/boards/x86_generic/generic_pc.c
@@ -78,7 +78,6 @@ device_initcall(devices_init);
 
 static struct NS16550_plat serial_plat = {
        .clock = 1843200,
-       .f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR,
        .reg_read = x86_uart_read,
        .reg_write = x86_uart_write,
 };
diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
index 9a4b4dc..1dea736 100644
--- a/drivers/serial/serial_ns16550.c
+++ b/drivers/serial/serial_ns16550.c
@@ -196,7 +196,10 @@ static int ns16550_probe(struct device_d *dev)
 
 	dev->type_data = cdev;
 	cdev->dev = dev;
-	cdev->f_caps = plat->f_caps;
+	if (plat->f_caps)
+		cdev->f_caps = plat->f_caps;
+	else
+		cdev->f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR;
 	cdev->tstc = ns16550_tstc;
 	cdev->putc = ns16550_putc;
 	cdev->getc = ns16550_getc;
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 15/23] edb93xx: switch to resource

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/edb93xx/edb93xx.c |   25 +++++++------------------
 1 files changed, 7 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boards/edb93xx/edb93xx.c b/arch/arm/boards/edb93xx/edb93xx.c
index b169db6..7f9e647 100644
--- a/arch/arm/boards/edb93xx/edb93xx.c
+++ b/arch/arm/boards/edb93xx/edb93xx.c
@@ -34,15 +34,6 @@
 
 #define DEVCFG_U1EN (1 << 18)
 
-/*
- * Up to 32MiB NOR type flash, connected to
- * CS line 6, data width is 16 bit
- */
-static struct device_d eth_dev = {
-	.id	  = -1,
-	.name     = "ep93xx_eth",
-};
-
 static int ep93xx_devices_init(void)
 {
 	struct device_d *sdram_dev;
@@ -81,7 +72,11 @@ static int ep93xx_devices_init(void)
 	armlinux_add_dram(sdram_dev);
 #endif
 
-	register_device(&eth_dev);
+	/*
+	 * Up to 32MiB NOR type flash, connected to
+	 * CS line 6, data width is 16 bit
+	 */
+	add_generic_device("ep93xx_eth", -1, NULL, 0, 0, IORESOURCE_MEM, NULL);
 
 	armlinux_set_bootparams((void *)CONFIG_EP93XX_SDRAM_BANK0_BASE + 0x100);
 
@@ -92,13 +87,6 @@ static int ep93xx_devices_init(void)
 
 device_initcall(ep93xx_devices_init);
 
-static struct device_d edb93xx_serial_device = {
-	.id	  = -1,
-	.name     = "pl010_serial",
-	.map_base = UART1_BASE,
-	.size     = 4096,
-};
-
 static int edb93xx_console_init(void)
 {
 	struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
@@ -117,7 +105,8 @@ static int edb93xx_console_init(void)
 	writel(0xAA, &syscon->sysswlock);
 	writel(value, &syscon->devicecfg);
 
-	register_device(&edb93xx_serial_device);
+	add_generic_device("pl010_serial", -1, NULL, UART1_BASE, 4096,
+			   IORESOURCE_MEM, NULL);
 
 	return 0;
 }
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 16/23] netx: switch to resource

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/netx/netx.c |   26 ++++----------------------
 1 files changed, 4 insertions(+), 22 deletions(-)

diff --git a/arch/arm/boards/netx/netx.c b/arch/arm/boards/netx/netx.c
index f3be348..65681aa 100644
--- a/arch/arm/boards/netx/netx.c
+++ b/arch/arm/boards/netx/netx.c
@@ -34,22 +34,10 @@ struct netx_eth_platform_data eth0_data = {
 	.xcno = 0,
 };
 
-static struct device_d netx_eth_dev0 = {
-	.id		= -1,
-	.name		= "netx-eth",
-	.platform_data	= &eth0_data,
-};
-
 struct netx_eth_platform_data eth1_data = {
 	.xcno = 1,
 };
 
-static struct device_d netx_eth_dev1 = {
-	.id		= -1,
-	.name		= "netx-eth",
-	.platform_data	= &eth1_data,
-};
-
 static int netx_devices_init(void) {
 	struct device_d *sdram_dev;
 
@@ -58,8 +46,8 @@ static int netx_devices_init(void) {
 	sdram_dev = add_mem_device("ram0", 0x80000000, 64 * 1024 * 1024,
 				   IORESOURCE_MEM_WRITEABLE);
 	armlinux_add_dram(sdram_dev);
-	register_device(&netx_eth_dev0);
-	register_device(&netx_eth_dev1);
+	add_generic_device("netx-eth", -1, NULL, 0, 0, IORESOURCE_MEM, &eth0_data);
+	add_generic_device("netx-eth", -1, NULL, 0, 0, IORESOURCE_MEM, &eth1_data);
 
 	devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self0");
 
@@ -76,13 +64,6 @@ static int netx_devices_init(void) {
 
 device_initcall(netx_devices_init);
 
-static struct device_d netx_serial_device = {
-	.id	  = -1,
-	.name     = "netx_serial",
-	.map_base = NETX_PA_UART0,
-	.size     = 0x40,
-};
-
 static int netx_console_init(void)
 {
 	/* configure gpio for serial */
@@ -91,7 +72,8 @@ static int netx_console_init(void)
 	*(volatile unsigned long *)(0x00100808) = 2;
 	*(volatile unsigned long *)(0x0010080c) = 2;
 
-	register_device(&netx_serial_device);
+	add_generic_device("netx_serial", -1, NULL, NETX_PA_UART0, 0x40,
+			   IORESOURCE_MEM, NULL);
 	return 0;
 }
 
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 17/23] fs: switch to resource

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 fs/devfs.c |    4 +++-
 fs/fs.c    |    8 ++++----
 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/fs/devfs.c b/fs/devfs.c
index 07ca16c..66f7ca4 100644
--- a/fs/devfs.c
+++ b/fs/devfs.c
@@ -161,7 +161,9 @@ static int devfs_ioctl(struct device_d *_dev, FILE *f, int request, void *buf)
 
 static int devfs_truncate(struct device_d *dev, FILE *f, ulong size)
 {
-	if (size > f->dev->size)
+	if (f->dev->num_resources < 1)
+		return -ENOSPC;
+	if (size > f->dev->resource[0].size)
 		return -ENOSPC;
 	return 0;
 }
diff --git a/fs/fs.c b/fs/fs.c
index bcc6ff4..7d65ec8 100644
--- a/fs/fs.c
+++ b/fs/fs.c
@@ -1043,11 +1043,11 @@ ssize_t mem_read(struct cdev *cdev, void *buf, size_t count, ulong offset, ulong
 	ulong size;
 	struct device_d *dev;
 
-	if (!cdev->dev)
+	if (!cdev->dev || cdev->dev->num_resources < 1)
 		return -1;
 	dev = cdev->dev;
 
-	size = min((ulong)count, dev->size - offset);
+	size = min((ulong)count, dev->resource[0].size - offset);
 	memcpy_sz(buf, dev_get_mem_region(dev, 0) + offset, size, flags & O_RWSIZE_MASK);
 	return size;
 }
@@ -1058,11 +1058,11 @@ ssize_t mem_write(struct cdev *cdev, const void *buf, size_t count, ulong offset
 	ulong size;
 	struct device_d *dev;
 
-	if (!cdev->dev)
+	if (!cdev->dev || cdev->dev->num_resources < 1)
 		return -1;
 	dev = cdev->dev;
 
-	size = min((ulong)count, dev->size - offset);
+	size = min((ulong)count, dev->resource[0].size - offset);
 	memcpy_sz(dev_get_mem_region(dev, 0) + offset, buf, size, flags & O_RWSIZE_MASK);
 	return size;
 }
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 18/23] ata: switch to resource

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/ata/disk_drive.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/ata/disk_drive.c b/drivers/ata/disk_drive.c
index 2383769..523edfd 100644
--- a/drivers/ata/disk_drive.c
+++ b/drivers/ata/disk_drive.c
@@ -197,7 +197,7 @@ static int disk_probe(struct device_d *dev)
 		dev_info(dev, "Drive size guessed to %u kiB\n", dev->size / 1024);
 	}
 #endif
-	atablk->blk.num_blocks = dev->size / SECTOR_SIZE;
+	atablk->blk.num_blocks = dev->resource[0].size / SECTOR_SIZE;
 	atablk->blk.ops = &ataops;
 	atablk->blk.blockbits = 9;
 	atablk->dev = dev;
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 19/23] sandbox: switch to resource

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/sandbox/board/hostfile.c                     |   14 ++------------
 arch/sandbox/mach-sandbox/include/mach/hostfile.h |    2 +-
 arch/sandbox/os/common.c                          |    4 ++--
 3 files changed, 5 insertions(+), 15 deletions(-)
 create mode 100644 arch/sandbox/include/asm/io.h

diff --git a/arch/sandbox/board/hostfile.c b/arch/sandbox/board/hostfile.c
index b049baa..f5452af 100644
--- a/arch/sandbox/board/hostfile.c
+++ b/arch/sandbox/board/hostfile.c
@@ -102,17 +102,7 @@ device_initcall(hf_init);
 
 int barebox_register_filedev(struct hf_platform_data *hf)
 {
-	struct device_d *dev;
-
-	dev = xzalloc(sizeof(struct device_d));
-
-	dev->platform_data = hf;
-
-	strcpy(dev->name, "hostfile");
-	dev->size = hf->size;
-	dev->id = -1;
-	dev->map_base = hf->map_base;
-
-	return register_device(dev);
+	return !add_generic_device("hostfile", -1, NULL, hf->base, hf->size,
+			   IORESOURCE_MEM, hf);
 }
 
diff --git a/arch/sandbox/include/asm/io.h b/arch/sandbox/include/asm/io.h
new file mode 100644
index 0000000..e69de29
diff --git a/arch/sandbox/mach-sandbox/include/mach/hostfile.h b/arch/sandbox/mach-sandbox/include/mach/hostfile.h
index f7aca7c..7c4e67c 100644
--- a/arch/sandbox/mach-sandbox/include/mach/hostfile.h
+++ b/arch/sandbox/mach-sandbox/include/mach/hostfile.h
@@ -4,7 +4,7 @@
 struct hf_platform_data {
 	int fd;
 	size_t size;
-	unsigned long map_base;
+	unsigned long base;
 	char *filename;
 	char *name;
 };
diff --git a/arch/sandbox/os/common.c b/arch/sandbox/os/common.c
index dcaf0c8..5074a06 100644
--- a/arch/sandbox/os/common.c
+++ b/arch/sandbox/os/common.c
@@ -236,10 +236,10 @@ static int add_image(char *str, char *name)
 	hf->name = strdup(name);
 
 	if (map) {
-		hf->map_base = (unsigned long)mmap(NULL, hf->size,
+		hf->base = (unsigned long)mmap(NULL, hf->size,
 				PROT_READ | (readonly ? 0 : PROT_WRITE),
 				MAP_SHARED, fd, 0);
-		if ((void *)hf->map_base == MAP_FAILED)
+		if ((void *)hf->base == MAP_FAILED)
 			printf("warning: mmapping %s failed\n", file);
 	}
 
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 20/23] imx: switch remaing board to resource

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/chumby_falconwing/falconwing.c    |   30 ++++------------
 arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c |   10 +----
 arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c |   21 +----------
 arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c |   10 +----
 arch/arm/boards/freescale-mx23-evk/mx23-evk.c     |   11 ++----
 arch/arm/boards/karo-tx28/tx28-stk5.c             |   39 +++++---------------
 6 files changed, 28 insertions(+), 93 deletions(-)

diff --git a/arch/arm/boards/chumby_falconwing/falconwing.c b/arch/arm/boards/chumby_falconwing/falconwing.c
index 5875955..69c3a61 100644
--- a/arch/arm/boards/chumby_falconwing/falconwing.c
+++ b/arch/arm/boards/chumby_falconwing/falconwing.c
@@ -39,12 +39,6 @@ static struct mxs_mci_platform_data mci_pdata = {
 	.voltages = MMC_VDD_32_33 | MMC_VDD_33_34,	/* fixed to 3.3 V */
 };
 
-static struct device_d mci_dev = {
-	.name     = "mxs_mci",
-	.map_base = IMX_SSP1_BASE,
-	.platform_data = &mci_pdata,
-};
-
 #define GPIO_LCD_RESET		50
 #define GPIO_LCD_BACKLIGHT	60
 
@@ -98,13 +92,6 @@ static struct imx_fb_platformdata fb_mode = {
 	.fixed_screen_size = MAX_FB_SIZE,
 };
 
-static struct device_d ldcif_dev = {
-	.name = "stmfb",
-	.map_base = IMX_FB_BASE,
-	.size = 4096,
-	.platform_data = &fb_mode,
-};
-
 static const uint32_t pad_setup[] = {
 	/* may be not required as already done by the bootlet code */
 #if 0
@@ -357,8 +344,10 @@ static int falconwing_devices_init(void)
 	imx_set_ioclk(480000000); /* enable IOCLK to run at the PLL frequency */
 	/* run the SSP unit clock at 100,000 kHz */
 	imx_set_sspclk(0, 100000000, 1);
-	register_device(&mci_dev);
-	register_device(&ldcif_dev);
+	add_generic_device("mxs_mci", 0, NULL, IMX_SSP1_BASE, 0,
+			   IORESOURCE_MEM, &mci_pdata);
+	add_generic_device("stmfb", 0, NULL, IMX_FB_BASE, 4096,
+			   IORESOURCE_MEM, &fb_mode);
 
 	falconwing_init_usb();
 
@@ -375,15 +364,12 @@ static int falconwing_devices_init(void)
 
 device_initcall(falconwing_devices_init);
 
-static struct device_d falconwing_serial_device = {
-	.name     = "stm_serial",
-	.map_base = IMX_DBGUART_BASE,
-	.size     = 8192,
-};
-
 static int falconwing_console_init(void)
 {
-	return register_device(&falconwing_serial_device);
+	add_generic_device("stm_serial", 0, NULL, IMX_DBGUART_BASE, 8192,
+			   IORESOURCE_MEM, NULL);
+
+	return 0;
 }
 
 console_initcall(falconwing_console_init);
diff --git a/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c b/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
index ecb5a38..aeeed17 100644
--- a/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
+++ b/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
@@ -156,13 +156,6 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_UTMI,
 };
 
-static struct device_d usbotg_dev = {
-	.name     = "fsl-udc",
-	.map_base = IMX_OTG_BASE,
-	.size     = 0x200,
-	.platform_data = &usb_pdata,
-};
-
 #ifdef CONFIG_MMU
 static void eukrea_cpuimx25_mmu_init(void)
 {
@@ -280,7 +273,8 @@ static int eukrea_cpuimx25_devices_init(void)
 	imx25_usb_init();
 	add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
 #endif
-	register_device(&usbotg_dev);
+	add_generic_device("fsl-udc", -1, NULL, IMX_OTG_BASE, 0x200,
+			   IORESOURCE_MEM, &usb_pdata);
 
 	armlinux_set_bootparams((void *)0x80000100);
 	armlinux_set_architecture(MACH_TYPE_EUKREA_CPUIMX25);
diff --git a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
index 65cf6d8..e8b62b2 100644
--- a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
+++ b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
@@ -149,14 +149,6 @@ static struct imx_fb_platform_data eukrea_cpuimx27_fb_data = {
 	.lscr1	= 0x00120300,
 	.dmacr	= 0x00020010,
 };
-
-static struct device_d imxfb_dev = {
-	.id		= -1,
-	.name		= "imxfb",
-	.map_base	= 0x10021000,
-	.size		= 0x1000,
-	.platform_data	= &eukrea_cpuimx27_fb_data,
-};
 #endif
 
 static int eukrea_cpuimx27_devices_init(void)
@@ -252,7 +244,7 @@ static int eukrea_cpuimx27_devices_init(void)
 	printf("Using environment in %s Flash\n", envdev);
 
 #ifdef CONFIG_DRIVER_VIDEO_IMX
-	register_device(&imxfb_dev);
+	imx_add_fb((void *)0x10021000, &eukrea_cpuimx27_fb_data);
 	gpio_direction_output(GPIO_PORTE | 5, 0);
 	gpio_set_value(GPIO_PORTE | 5, 1);
 	gpio_direction_output(GPIO_PORTA | 25, 0);
@@ -267,19 +259,10 @@ static int eukrea_cpuimx27_devices_init(void)
 
 device_initcall(eukrea_cpuimx27_devices_init);
 
-#ifdef CONFIG_DRIVER_SERIAL_IMX
-static struct device_d eukrea_cpuimx27_serial_device = {
-	.id	  = -1,
-	.name     = "imx_serial",
-	.map_base = IMX_UART1_BASE,
-	.size     = 4096,
-};
-#endif
-
 static int eukrea_cpuimx27_console_init(void)
 {
 #ifdef CONFIG_DRIVER_SERIAL_IMX
-	register_device(&eukrea_cpuimx27_serial_device);
+	imx_add_uart((void *)IMX_UART1_BASE, -1);
 #endif
 	/* configure 8 bit UART on cs3 */
 	FMCR &= ~0x2;
diff --git a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
index c1fe144..53e5bad 100644
--- a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
+++ b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
@@ -124,13 +124,6 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_UTMI,
 };
-
-static struct device_d usbotg_dev = {
-	.name     = "fsl-udc",
-	.map_base = IMX_OTG_BASE,
-	.size     = 0x200,
-	.platform_data = &usb_pdata,
-};
 #endif
 
 #ifdef CONFIG_MMU
@@ -182,7 +175,8 @@ static int eukrea_cpuimx35_devices_init(void)
 	/* Workaround ENGcm09152 */
 	tmp = readl(IMX_OTG_BASE + 0x608);
 	writel(tmp | (1 << 23), IMX_OTG_BASE + 0x608);
-	register_device(&usbotg_dev);
+	add_generic_device("fsl-udc", -1, NULL, IMX_OTG_BASE, 0x200,
+			   IORESOURCE_MEM, &usb_pdata);
 #endif
 	armlinux_set_bootparams((void *)0x80000100);
 	armlinux_set_architecture(MACH_TYPE_EUKREA_CPUIMX35);
diff --git a/arch/arm/boards/freescale-mx23-evk/mx23-evk.c b/arch/arm/boards/freescale-mx23-evk/mx23-evk.c
index d6c2996..f9f85fa 100644
--- a/arch/arm/boards/freescale-mx23-evk/mx23-evk.c
+++ b/arch/arm/boards/freescale-mx23-evk/mx23-evk.c
@@ -40,15 +40,12 @@ static int mx23_evk_devices_init(void)
 
 device_initcall(mx23_evk_devices_init);
 
-static struct device_d mx23_evk_serial_device = {
-	.name     = "stm_serial",
-	.map_base = IMX_DBGUART_BASE,
-	.size     = 8192,
-};
-
 static int mx23_evk_console_init(void)
 {
-	return register_device(&mx23_evk_serial_device);
+	add_generic_device("stm_serial", 0, NULL, IMX_DBGUART_BASE, 8192,
+			   IORESOURCE_MEM, NULL);
+	
+	return 0;
 }
 
 console_initcall(mx23_evk_console_init);
diff --git a/arch/arm/boards/karo-tx28/tx28-stk5.c b/arch/arm/boards/karo-tx28/tx28-stk5.c
index 81cb80c..8427dc2 100644
--- a/arch/arm/boards/karo-tx28/tx28-stk5.c
+++ b/arch/arm/boards/karo-tx28/tx28-stk5.c
@@ -35,24 +35,12 @@ static struct mxs_mci_platform_data mci_pdata = {
 	.f_max = 25000000,
 };
 
-static struct device_d mci_socket = {
-	.name = "mxs_mci",
-	.map_base = IMX_SSP0_BASE,
-	.platform_data = &mci_pdata,
-};
-
 /* PhyAD[0..2]=0, RMIISEL=1 */
 static struct fec_platform_data fec_info = {
 	.xcv_type = RMII,
 	.phy_addr = 0,
 };
 
-static struct device_d fec_dev = {
-	.name = "fec_imx",
-	.map_base = IMX_FEC0_BASE,
-	.platform_data = &fec_info,
-};
-
 /*
  * The TX28 EVK comes with a VGA connector. We can support many video modes
  *
@@ -215,13 +203,6 @@ static struct imx_fb_platformdata tx28_fb_pdata = {
 	.enable = tx28_fb_enable,
 };
 
-static struct device_d ldcif_dev = {
-	.name = "stmfb",
-	.map_base = IMX_FB_BASE,
-	.size = 4096,
-	.platform_data = &tx28_fb_pdata,
-};
-
 static const uint32_t tx28_starterkit_pad_setup[] = {
 	/*
 	 * Part II of phy's initialization
@@ -378,17 +359,20 @@ void base_board_init(void)
 	/* run the SSP unit clock at 100 MHz */
 	imx_set_sspclk(0, 100000000, 1);
 
-	register_device(&mci_socket);
+	add_generic_device("mxs_mci", 0, NULL, IMX_SSP0_BASE, 0,
+			   IORESOURCE_MEM, &mci_pdata);
 
 	if (tx28_fb_pdata.fixed_screen < (void *)&_end) {
 		printf("Warning: fixed_screen overlaps barebox\n");
 		tx28_fb_pdata.fixed_screen = NULL;
 	}
 
-	register_device(&ldcif_dev);
+	add_generic_device("stmfb", 0, NULL, IMX_FB_BASE, 4096,
+			   IORESOURCE_MEM, &tx28_fb_pdata);
 
 	imx_enable_enetclk();
-	register_device(&fec_dev);
+	add_generic_device("fec_imx", 0, NULL, IMX_FEC0_BASE, 0,
+			   IORESOURCE_MEM, &fec_info);
 
 	ret = register_persistent_environment();
 	if (ret != 0)
@@ -396,15 +380,12 @@ void base_board_init(void)
 				"storage (%d)\n", ret);
 }
 
-static struct device_d tx28kit_serial_device = {
-	.name     = "stm_serial",
-	.map_base = IMX_DBGUART_BASE,
-	.size     = 8192,
-};
-
 static int tx28kit_console_init(void)
 {
-	return register_device(&tx28kit_serial_device);
+	add_generic_device("stm_serial", 0, NULL, IMX_DBGUART_BASE, 8192,
+			   IORESOURCE_MEM, NULL);
+	
+	return 0;
 }
 
 console_initcall(tx28kit_console_init);
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 21/23] mci-core: switch to resource

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/mci/mci-core.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
index 3cf364c..c03885b 100644
--- a/drivers/mci/mci-core.c
+++ b/drivers/mci/mci-core.c
@@ -1231,7 +1231,7 @@ static int mci_card_probe(struct device_d *mci_dev)
 	p->priv = mci_dev;
 
 	strcpy(disk_dev->name, "disk");
-	disk_dev->size = mci->capacity;
+	disk_dev->resource[0].size = mci->capacity;
 	disk_dev->platform_data = p;
 
 	register_device(disk_dev);
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 22/23] nios2: remove dead code in generic board

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/nios2/boards/generic/generic.c |    8 --------
 1 files changed, 0 insertions(+), 8 deletions(-)

diff --git a/arch/nios2/boards/generic/generic.c b/arch/nios2/boards/generic/generic.c
index 49c1d7c..0e3852b 100644
--- a/arch/nios2/boards/generic/generic.c
+++ b/arch/nios2/boards/generic/generic.c
@@ -32,14 +32,6 @@ static struct device_d mac_dev = {
 	.platform_data = &phy_address,
 };
 
-/*
-static struct device_d epcs_flash_device = {
-	.id       = -1,
-	.name     = "epcs_flash",
-	.map_base = NIOS_SOPC_EPCS_BASE,
-};
-*/
-
 static int generic_devices_init(void)
 {
 	add_cfi_flash_device(-1, NIOS_SOPC_FLASH_BASE, NIOS_SOPC_FLASH_SIZE, 0);
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 23/23] driver: remove map_base

[Jean-Christophe PLAGNIOL-VILLARD]

as now all the drivers and board have been switch to resource when can drop
map_base and size from device_d

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/base/driver.c |   20 --------------------
 include/driver.h      |    6 ------
 2 files changed, 0 insertions(+), 26 deletions(-)

diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index 4ceb346..84f9c81 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -103,26 +103,6 @@ int register_device(struct device_d *new_device)
 {
 	struct driver_d *drv;
 
-	/* if no map_base available use the first resource if available
-	 * so we do not need to duplicate it
-	 * Temporary fixup until we get rid of map_base and size
-	 */
-	if (new_device->map_base) {
-		if (new_device->resource) {
-			dev_err(new_device, "map_base and resource specifed\n");
-			return -EIO;
-		}
-		dev_warn(new_device, "uses map_base. Please convert to use resources\n");
-		new_device->resource = xzalloc(sizeof(struct resource));
-		new_device->resource[0].start = new_device->map_base;
-		new_device->resource[0].size = new_device->size;
-		new_device->resource[0].flags = IORESOURCE_MEM;
-		new_device->num_resources = 1;
-	} else if (new_device->resource) {
-		new_device->map_base = new_device->resource[0].start;
-		new_device->size = new_device->resource[0].size;
-	}
-
 	if (new_device->id < 0) {
 		new_device->id = get_free_deviceid(new_device->name);
 	} else {
diff --git a/include/driver.h b/include/driver.h
index baf8d88..b011f98 100644
--- a/include/driver.h
+++ b/include/driver.h
@@ -71,12 +71,6 @@ struct device_d {
 	 * something like eth0 or nor0. */
 	int id;
 
-	resource_size_t size;
-
-	/*! For devices which are directly mapped into memory, i.e. NOR
-	 * Flash or SDRAM. */
-	resource_size_t map_base;
-
 	struct resource *resource;
 	int num_resources;
 
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 21/23] mci-core: switch to resource

[Sascha Hauer]

On Sat, Jul 30, 2011 at 05:17:09AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
>  drivers/mci/mci-core.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
> index 3cf364c..c03885b 100644
> --- a/drivers/mci/mci-core.c
> +++ b/drivers/mci/mci-core.c
> @@ -1231,7 +1231,7 @@ static int mci_card_probe(struct device_d *mci_dev)
>  	p->priv = mci_dev;
>  
>  	strcpy(disk_dev->name, "disk");
> -	disk_dev->size = mci->capacity;
> +	disk_dev->resource[0].size = mci->capacity;
>  	disk_dev->platform_data = p;

Resources for a device must be allocated. I already fixed this once with
the following. Please do not reintroduce this bug again.

(and honestly, this registering of the "disk" device is just a crude way
of passing around data in a void pointer. The real solution for this is
to just add a register_ata_interface() function instead of registering a
device.)

Sascha

commit 8f24f965e117444c1b253c14621d80fcaf31554c
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date:   Wed Jul 27 14:56:57 2011 +0200

    mci: do not use unitialized resource
    
    disk_dev->resource is unitialized. Do not use it. This
    got broken in:
    
    commit 4c542622cb07354c410680e0a6782508179f9e5f
    Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Date:   Mon Jul 18 20:17:04 2011 +0800
    
        mci: switch to "struct resource"
    
        Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
<plagnioj@jcrosoft.com>
    
    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
index 0611ce6..3cf364c 100644
--- a/drivers/mci/mci-core.c
+++ b/drivers/mci/mci-core.c
@@ -1231,8 +1231,7 @@ static int mci_card_probe(struct device_d
*mci_dev)
 	p->priv = mci_dev;
 
 	strcpy(disk_dev->name, "disk");
-	disk_dev->resource[0].size = mci->capacity;
-	disk_dev->resource[0].start = 0;
+	disk_dev->size = mci->capacity;
 	disk_dev->platform_data = p;
 
 	register_device(disk_dev);
-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 21/23] mci-core: switch to resource

[Jean-Christophe PLAGNIOL-VILLARD]

On 09:32 Mon 01 Aug     , Sascha Hauer wrote:
> On Sat, Jul 30, 2011 at 05:17:09AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> > ---
> >  drivers/mci/mci-core.c |    2 +-
> >  1 files changed, 1 insertions(+), 1 deletions(-)
> > 
> > diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
> > index 3cf364c..c03885b 100644
> > --- a/drivers/mci/mci-core.c
> > +++ b/drivers/mci/mci-core.c
> > @@ -1231,7 +1231,7 @@ static int mci_card_probe(struct device_d *mci_dev)
> >  	p->priv = mci_dev;
> >  
> >  	strcpy(disk_dev->name, "disk");
> > -	disk_dev->size = mci->capacity;
> > +	disk_dev->resource[0].size = mci->capacity;
> >  	disk_dev->platform_data = p;
> 
> Resources for a device must be allocated. I already fixed this once with
> the following. Please do not reintroduce this bug again.
> 
> (and honestly, this registering of the "disk" device is just a crude way
> of passing around data in a void pointer. The real solution for this is
> to just add a register_ata_interface() function instead of registering a
> device.)
agreed I plan to get rid of this but first need to fininsh the map_base frop

but as we drop map_base and size so we need to do like this

Best Regards,
J.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 21/23] mci-core: switch to resource

[Jean-Christophe PLAGNIOL-VILLARD]

On 10:09 Mon 01 Aug     , Sascha Hauer wrote:
> On Mon, Aug 01, 2011 at 09:47:21AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > On 09:32 Mon 01 Aug     , Sascha Hauer wrote:
> > > On Sat, Jul 30, 2011 at 05:17:09AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> > > > ---
> > > >  drivers/mci/mci-core.c |    2 +-
> > > >  1 files changed, 1 insertions(+), 1 deletions(-)
> > > > 
> > > > diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
> > > > index 3cf364c..c03885b 100644
> > > > --- a/drivers/mci/mci-core.c
> > > > +++ b/drivers/mci/mci-core.c
> > > > @@ -1231,7 +1231,7 @@ static int mci_card_probe(struct device_d *mci_dev)
> > > >  	p->priv = mci_dev;
> > > >  
> > > >  	strcpy(disk_dev->name, "disk");
> > > > -	disk_dev->size = mci->capacity;
> > > > +	disk_dev->resource[0].size = mci->capacity;
> > > >  	disk_dev->platform_data = p;
> > > 
> > > Resources for a device must be allocated. I already fixed this once with
> > > the following. Please do not reintroduce this bug again.
> > > 
> > > (and honestly, this registering of the "disk" device is just a crude way
> > > of passing around data in a void pointer. The real solution for this is
> > > to just add a register_ata_interface() function instead of registering a
> > > device.)
> > agreed I plan to get rid of this but first need to fininsh the map_base frop
> > 
> > but as we drop map_base and size so we need to do like this
> 
> Ok, but please allocate the space for the resource then.
> 
> I thought about using mapping the vector page to the top of the memory
> space. Then we could get proper NULL pointer deref aborts to catch
> things like this.
can we can we do it in a second patch?

Best Regards,
J.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 21/23] mci-core: switch to resource

[Sascha Hauer]

On Mon, Aug 01, 2011 at 09:47:21AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 09:32 Mon 01 Aug     , Sascha Hauer wrote:
> > On Sat, Jul 30, 2011 at 05:17:09AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> > > ---
> > >  drivers/mci/mci-core.c |    2 +-
> > >  1 files changed, 1 insertions(+), 1 deletions(-)
> > > 
> > > diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
> > > index 3cf364c..c03885b 100644
> > > --- a/drivers/mci/mci-core.c
> > > +++ b/drivers/mci/mci-core.c
> > > @@ -1231,7 +1231,7 @@ static int mci_card_probe(struct device_d *mci_dev)
> > >  	p->priv = mci_dev;
> > >  
> > >  	strcpy(disk_dev->name, "disk");
> > > -	disk_dev->size = mci->capacity;
> > > +	disk_dev->resource[0].size = mci->capacity;
> > >  	disk_dev->platform_data = p;
> > 
> > Resources for a device must be allocated. I already fixed this once with
> > the following. Please do not reintroduce this bug again.
> > 
> > (and honestly, this registering of the "disk" device is just a crude way
> > of passing around data in a void pointer. The real solution for this is
> > to just add a register_ata_interface() function instead of registering a
> > device.)
> agreed I plan to get rid of this but first need to fininsh the map_base frop
> 
> but as we drop map_base and size so we need to do like this

Ok, but please allocate the space for the resource then.

I thought about using mapping the vector page to the top of the memory
space. Then we could get proper NULL pointer deref aborts to catch
things like this.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 21/23] mci-core: switch to resource

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/mci/mci-core.c |   10 ++--------
 1 files changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
index 3cf364c..fea2691 100644
--- a/drivers/mci/mci-core.c
+++ b/drivers/mci/mci-core.c
@@ -1175,7 +1175,6 @@ static int mci_card_probe(struct device_d *mci_dev)
 {
 	struct mci *mci = GET_MCI_DATA(mci_dev);
 	struct mci_host *host = GET_MCI_PDATA(mci_dev);
-	struct device_d *disk_dev;
 	struct ata_interface *p;
 	int rc;
 
@@ -1221,8 +1220,7 @@ static int mci_card_probe(struct device_d *mci_dev)
 	 * An MMC/SD card acts like an ordinary disk.
 	 * So, re-use the disk driver to gain access to this media
 	 */
-	disk_dev = xzalloc(sizeof(struct device_d) + sizeof(struct ata_interface));
-	p = (struct ata_interface*)&disk_dev[1];
+	p = xzalloc(sizeof(struct ata_interface));
 
 #ifdef CONFIG_MCI_WRITE
 	p->write = mci_sd_write;
@@ -1230,11 +1228,7 @@ static int mci_card_probe(struct device_d *mci_dev)
 	p->read = mci_sd_read;
 	p->priv = mci_dev;
 
-	strcpy(disk_dev->name, "disk");
-	disk_dev->size = mci->capacity;
-	disk_dev->platform_data = p;
-
-	register_device(disk_dev);
+	add_generic_device("disk", -1, NULL, 0, mci->capacity, IORESOURCE_MEM, p);
 
 	pr_debug("SD Card successfully added\n");
 
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 21/23] mci-core: switch to resource

[Sascha Hauer]

On Mon, Aug 01, 2011 at 10:03:01AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 10:09 Mon 01 Aug     , Sascha Hauer wrote:
> > On Mon, Aug 01, 2011 at 09:47:21AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > On 09:32 Mon 01 Aug     , Sascha Hauer wrote:
> > > > On Sat, Jul 30, 2011 at 05:17:09AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > > > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> > > > > ---
> > > > >  drivers/mci/mci-core.c |    2 +-
> > > > >  1 files changed, 1 insertions(+), 1 deletions(-)
> > > > > 
> > > > > diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
> > > > > index 3cf364c..c03885b 100644
> > > > > --- a/drivers/mci/mci-core.c
> > > > > +++ b/drivers/mci/mci-core.c
> > > > > @@ -1231,7 +1231,7 @@ static int mci_card_probe(struct device_d *mci_dev)
> > > > >  	p->priv = mci_dev;
> > > > >  
> > > > >  	strcpy(disk_dev->name, "disk");
> > > > > -	disk_dev->size = mci->capacity;
> > > > > +	disk_dev->resource[0].size = mci->capacity;
> > > > >  	disk_dev->platform_data = p;
> > > > 
> > > > Resources for a device must be allocated. I already fixed this once with
> > > > the following. Please do not reintroduce this bug again.
> > > > 
> > > > (and honestly, this registering of the "disk" device is just a crude way
> > > > of passing around data in a void pointer. The real solution for this is
> > > > to just add a register_ata_interface() function instead of registering a
> > > > device.)
> > > agreed I plan to get rid of this but first need to fininsh the map_base frop
> > > 
> > > but as we drop map_base and size so we need to do like this
> > 
> > Ok, but please allocate the space for the resource then.
> > 
> > I thought about using mapping the vector page to the top of the memory
> > space. Then we could get proper NULL pointer deref aborts to catch
> > things like this.
> can we can we do it in a second patch?

This was just an idea not a call for action :)

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PULL] final switch to resoruce

[Jean-Christophe PLAGNIOL-VILLARD]

On 17:53 Fri 29 Jul     , Jean-Christophe PLAGNIOL-VILLARD wrote:
> Hi,
> 
> 	the follwing patch series finish to switch all boards and drivers to
> 	resource
> 
> The following changes since commit 5ba0502901dacc9a1971378d6af8318a1d28051c:
> 
>   arm: add support for the i.MX53 loco board (2011-07-29 12:10:38 +0200)
> 
> are available in the git repository at:
>   git://uboot.jcrosoft.org/barebox.git resource
I update the git with the mcu-core v2

is it ok to pull it?

Best Regards,
J.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PULL] final switch to resoruce

[Sascha Hauer]

On Mon, Aug 01, 2011 at 12:45:19PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 17:53 Fri 29 Jul     , Jean-Christophe PLAGNIOL-VILLARD wrote:
> > Hi,
> > 
> > 	the follwing patch series finish to switch all boards and drivers to
> > 	resource
> > 
> > The following changes since commit 5ba0502901dacc9a1971378d6af8318a1d28051c:
> > 
> >   arm: add support for the i.MX53 loco board (2011-07-29 12:10:38 +0200)
> > 
> > are available in the git repository at:
> >   git://uboot.jcrosoft.org/barebox.git resource
> I update the git with the mcu-core v2
> 
> is it ok to pull it?

Yes, done.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 3/7] dm9000: replace DM9000_WIDTH_8/16/32 by IORESOURCE_MEM_8/16/32BIT

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/at91sam9261ek/init.c |    2 +-
 arch/arm/boards/mini2440/mini2440.c  |    2 +-
 arch/arm/boards/pm9261/init.c        |    2 +-
 arch/arm/boards/scb9328/scb9328.c    |    2 +-
 drivers/net/dm9000.c                 |   12 ++++++------
 include/dm9000.h                     |    4 ----
 6 files changed, 10 insertions(+), 14 deletions(-)

diff --git a/arch/arm/boards/at91sam9261ek/init.c b/arch/arm/boards/at91sam9261ek/init.c
index 4009523..812b399 100644
--- a/arch/arm/boards/at91sam9261ek/init.c
+++ b/arch/arm/boards/at91sam9261ek/init.c
@@ -89,7 +89,7 @@ static void ek_add_device_nand(void)
  */
 #if defined(CONFIG_DRIVER_NET_DM9000)
 static struct dm9000_platform_data dm9000_data = {
-	.buswidth	= DM9000_WIDTH_16,
+	.buswidth	= IORESOURCE_MEM_16BIT,
 	.srom		= 0,
 };
 
diff --git a/arch/arm/boards/mini2440/mini2440.c b/arch/arm/boards/mini2440/mini2440.c
index 2d27b00..634e035 100644
--- a/arch/arm/boards/mini2440/mini2440.c
+++ b/arch/arm/boards/mini2440/mini2440.c
@@ -63,7 +63,7 @@ static struct device_d nand_dev = {
  * Area 2: Offset 0x304...0x307
  */
 static struct dm9000_platform_data dm9000_data = {
-	.buswidth = DM9000_WIDTH_16,
+	.buswidth = IORESOURCE_MEM_16BIT,
 	.srom     = 1,
 };
 
diff --git a/arch/arm/boards/pm9261/init.c b/arch/arm/boards/pm9261/init.c
index 1059aec..fa21e24 100644
--- a/arch/arm/boards/pm9261/init.c
+++ b/arch/arm/boards/pm9261/init.c
@@ -89,7 +89,7 @@ static void pm_add_device_nand(void)
  */
 #if defined(CONFIG_DRIVER_NET_DM9000)
 static struct dm9000_platform_data dm9000_data = {
-	.buswidth	= DM9000_WIDTH_16,
+	.buswidth	= IORESOURCE_MEM_16BIT,
 	.srom		= 1,
 };
 
diff --git a/arch/arm/boards/scb9328/scb9328.c b/arch/arm/boards/scb9328/scb9328.c
index d49eaff..47aa8ce 100644
--- a/arch/arm/boards/scb9328/scb9328.c
+++ b/arch/arm/boards/scb9328/scb9328.c
@@ -34,7 +34,7 @@
 #include <led.h>
 
 static struct dm9000_platform_data dm9000_data = {
-	.buswidth = DM9000_WIDTH_16,
+	.buswidth = IORESOURCE_MEM_16BIT,
 	.srom     = 1,
 };
 
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index b867d21..691d877 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -294,16 +294,16 @@ static int dm9000_eth_send (struct eth_device *edev,
 	writeb(DM9000_MWCMD, priv->iobase);
 
 	switch (priv->buswidth) {
-	case DM9000_WIDTH_8:
+	case IORESOURCE_MEM_8BIT:
 		for (i = 0; i < length; i++)
 			writeb(data_ptr[i] & 0xff, priv->iodata);
 		break;
-	case DM9000_WIDTH_16:
+	case IORESOURCE_MEM_16BIT:
 		tmplen = (length + 1) / 2;
 		for (i = 0; i < tmplen; i++)
 			writew(((u16 *)data_ptr)[i], priv->iodata);
 		break;
-	case DM9000_WIDTH_32:
+	case IORESOURCE_MEM_32BIT:
 		tmplen = (length + 3) / 4;
 		for (i = 0; i < tmplen; i++)
 			writel(((u32 *) data_ptr)[i], priv->iodata);
@@ -371,20 +371,20 @@ static int dm9000_eth_rx (struct eth_device *edev)
 	/* Move data from DM9000 */
 	/* Read received packet from RX SRAM */
 	switch (priv->buswidth) {
-	case DM9000_WIDTH_8:
+	case IORESOURCE_MEM_8BIT:
 		RxStatus = readb(priv->iodata) + (readb(priv->iodata) << 8);
 		RxLen = readb(priv->iodata) + (readb(priv->iodata) << 8);
 		for (i = 0; i < RxLen; i++)
 			rdptr[i] = readb(priv->iodata);
 		break;
-	case DM9000_WIDTH_16:
+	case IORESOURCE_MEM_16BIT:
 		RxStatus = readw(priv->iodata);
 		RxLen = readw(priv->iodata);
 		tmplen = (RxLen + 1) / 2;
 		for (i = 0; i < tmplen; i++)
 			((u16 *) rdptr)[i] = readw(priv->iodata);
 		break;
-	case DM9000_WIDTH_32:
+	case IORESOURCE_MEM_32BIT:
 		tmpdata = readl(priv->iodata);
 		RxStatus = tmpdata;
 		RxLen = tmpdata >> 16;
diff --git a/include/dm9000.h b/include/dm9000.h
index 0991ab5..c4618f1 100644
--- a/include/dm9000.h
+++ b/include/dm9000.h
@@ -2,10 +2,6 @@
 #ifndef __DM9000_H__
 #define __DM9000_H__
 
-#define DM9000_WIDTH_8		1
-#define DM9000_WIDTH_16		2
-#define DM9000_WIDTH_32		3
-
 struct dm9000_platform_data {
 	int buswidth;
 	int srom;
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox