From: franck.jullien@gmail.com
To: barebox@lists.infradead.org
Subject: [PATCH] nios2: Add Altera SPI master driver
Date: Sat, 30 Jul 2011 22:18:23 +0200 [thread overview]
Message-ID: <1312057103-29658-1-git-send-email-franck.jullien@gmail.com> (raw)
From: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
---
arch/nios2/include/asm/spi.h | 21 ++++
drivers/spi/Kconfig | 5 +
drivers/spi/Makefile | 1 +
drivers/spi/altera_spi.c | 226 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 253 insertions(+), 0 deletions(-)
create mode 100644 arch/nios2/include/asm/spi.h
create mode 100644 drivers/spi/altera_spi.c
diff --git a/arch/nios2/include/asm/spi.h b/arch/nios2/include/asm/spi.h
new file mode 100644
index 0000000..4e576b9
--- /dev/null
+++ b/arch/nios2/include/asm/spi.h
@@ -0,0 +1,21 @@
+#ifndef __ALTERA_SPI_H_
+#define __ALTERA_SPI_H_
+
+#include <spi/spi.h>
+
+struct spi_altera_master {
+ int num_chipselect;
+ int spi_mode;
+ int databits;
+ int speed;
+};
+
+struct altera_spi {
+ struct spi_master master;
+ int databits;
+ int speed;
+ int mode;
+ void __iomem *regs;
+};
+
+#endif /*__ALTERA_SPI_H_*/
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 9ab03f6..c72493c 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -19,4 +19,9 @@ config DRIVER_SPI_IMX_2_3
depends on ARCH_IMX51 || ARCH_IMX53
default y
+config DRIVER_SPI_ALTERA
+ bool "Altera SPI Master driver"
+ depends on NIOS2
+ depends on SPI
+
endmenu
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index b2b2f67..90e141d 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_SPI) += spi.o
obj-$(CONFIG_DRIVER_SPI_IMX) += imx_spi.o
+obj-$(CONFIG_DRIVER_SPI_ALTERA) += altera_spi.o
diff --git a/drivers/spi/altera_spi.c b/drivers/spi/altera_spi.c
new file mode 100644
index 0000000..71df6b7
--- /dev/null
+++ b/drivers/spi/altera_spi.c
@@ -0,0 +1,226 @@
+/*
+ * (C) Copyright 2011 - Franck JULLIEN <elec4fun@gmail.com>
+ * Inspired from Thomas Chou's Linux spi_altera.c driver
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <driver.h>
+#include <spi/spi.h>
+#include <asm/io.h>
+#include <asm/spi.h>
+#include <asm/nios2-io.h>
+
+#define CS_ACTIVE 1
+#define CS_INACTIVE 0
+
+static int altera_spi_setup(struct spi_device *spi)
+{
+ struct spi_master *master = spi->master;
+ struct device_d *master_dev = master->dev;
+ struct device_d spi_dev = spi->dev;
+ struct altera_spi *altera_spi = container_of(master, struct altera_spi, master);
+
+ if (spi->bits_per_word != altera_spi->databits) {
+ printf("%s doesn't support %d bits per word requested by %s\n", master_dev->name,
+ spi->bits_per_word, spi_dev.name);
+ return -1;
+ }
+
+ if ((spi->mode & (SPI_CPHA | SPI_CPOL)) != altera_spi->mode) {
+ printf("%s doesn't support SPI_MODE%d requested by %s\n", master_dev->name,
+ spi->mode & (SPI_CPHA | SPI_CPOL), spi_dev.name);
+ return -1;
+ }
+
+ if (spi->max_speed_hz < altera_spi->speed) {
+ printf("%s frequency is too high for %s\n", master_dev->name, spi_dev.name);
+ return -1;
+ }
+
+ debug("%s mode 0x%08x bits_per_word: %d speed: %d\n",
+ __func__, spi->mode, spi->bits_per_word,
+ altera_spi->speed);
+
+ return 0;
+}
+
+
+static unsigned int altera_spi_xchg_single(struct altera_spi *altera_spi, unsigned int data)
+{
+ struct nios_spi *nios_spi = altera_spi->regs;
+
+ while (!(readl(&nios_spi->status) & NIOS_SPI_TRDY));
+ writel(data, &nios_spi->txdata);
+
+ while (!(readl(&nios_spi->status) & NIOS_SPI_RRDY));
+
+ return readl(&nios_spi->rxdata);
+}
+
+/*
+ * When using SPI_CS_HIGH devices, only one device is allowed to be
+ * connected to the Altera SPI master. This limitation is due to the
+ * emulation of an active high CS by writing 0 to the slaveselect register
+ * (this produce a '1' to all CS pins).
+ */
+static void altera_spi_chipselect(struct spi_device *spi, int is_active)
+{
+ struct altera_spi *altera_spi = container_of(spi->master, struct altera_spi, master);
+ struct nios_spi *nios_spi = altera_spi->regs;
+ uint32_t tmp;
+
+ if (spi->mode & SPI_CS_HIGH) {
+ switch (is_active) {
+ case CS_INACTIVE:
+ writel(1 << spi->chip_select, &nios_spi->slaveselect);
+ tmp = readl(&nios_spi->control);
+ writel(tmp | NIOS_SPI_SSO, &nios_spi->control);
+ break;
+
+ case CS_ACTIVE:
+ tmp = readw(&nios_spi->control);
+ writew(tmp & ~NIOS_SPI_SSO, &nios_spi->control);
+ writel(0, &nios_spi->slaveselect);
+ break;
+ }
+ } else {
+ switch (is_active) {
+ case CS_INACTIVE:
+ tmp = readw(&nios_spi->control);
+ writew(tmp & ~NIOS_SPI_SSO, &nios_spi->control);
+ break;
+
+ case CS_ACTIVE:
+ writel(1 << spi->chip_select, &nios_spi->slaveselect);
+ tmp = readl(&nios_spi->control);
+ writel(tmp | NIOS_SPI_SSO, &nios_spi->control);
+ break;
+ }
+ }
+}
+
+static int altera_spi_transfer(struct spi_device *spi, struct spi_message *mesg)
+{
+ struct altera_spi *altera_spi = container_of(spi->master, struct altera_spi, master);
+ struct nios_spi *nios_spi = altera_spi->regs;
+ struct spi_transfer *t = NULL;
+ int word_len = spi->bits_per_word;
+
+ u32 txval;
+ u32 rxval;
+
+ altera_spi_chipselect(spi, 1);
+
+ word_len = spi->bits_per_word;
+ mesg->actual_length = 0;
+
+ list_for_each_entry(t, &mesg->transfers, transfer_list) {
+
+ if (word_len <= 8) {
+ const u8 *txbuf = t->tx_buf;
+ u8 *rxbuf = t->rx_buf;
+ int i = 0;
+
+ while (i < t->len) {
+ txval = txbuf ? txbuf[i] : 0;
+ rxval = altera_spi_xchg_single(altera_spi, txval);
+ if (rxbuf)
+ rxbuf[i] = rxval;
+ i++;
+ mesg->actual_length++;
+ }
+ } else if (word_len <= 16) {
+ const u16 *txbuf = t->tx_buf;
+ u16 *rxbuf = t->rx_buf;
+ int i = 0;
+
+ while (i < t->len >> 1) {
+ txval = txbuf ? txbuf[i] : 0;
+ rxval = altera_spi_xchg_single(altera_spi, txval);
+ if (rxbuf)
+ rxbuf[i] = rxval;
+ i++;
+ mesg->actual_length += 2;
+ }
+ } else if (word_len <= 32) {
+ const u32 *txbuf = t->tx_buf;
+ u32 *rxbuf = t->rx_buf;
+ int i = 0;
+
+ while (i < t->len >> 2) {
+ txval = txbuf ? txbuf[i] : 0;
+ rxval = altera_spi_xchg_single(altera_spi, txval);
+ if (rxbuf)
+ rxbuf[i] = rxval;
+ i++;
+ mesg->actual_length += 4;
+ }
+ }
+ }
+
+ /* Wait the end of any pending transfert */
+ while ((readl(&nios_spi->status) & NIOS_SPI_TMT) == 0);
+
+ altera_spi_chipselect(spi, 0);
+
+ return 0;
+}
+
+static int altera_spi_probe(struct device_d *dev)
+{
+ struct spi_master *master;
+ struct altera_spi *altera_spi;
+ struct spi_altera_master *pdata = dev->platform_data;
+ struct nios_spi *nios_spi;
+
+ altera_spi = xzalloc(sizeof(*altera_spi));
+
+ master = &altera_spi->master;
+ master->dev = dev;
+
+ master->setup = altera_spi_setup;
+ master->transfer = altera_spi_transfer;
+ master->num_chipselect = pdata->num_chipselect;
+
+ altera_spi->regs = dev_request_mem_region(dev, 0);
+ altera_spi->databits = pdata->databits;
+ altera_spi->speed = pdata->speed;
+ altera_spi->mode = pdata->spi_mode;
+
+ nios_spi = altera_spi->regs;
+ writel(0, &nios_spi->slaveselect);
+ writel(0, &nios_spi->control);
+
+ spi_register_master(master);
+
+ return 0;
+}
+
+static struct driver_d altera_spi_driver = {
+ .name = "altera_spi",
+ .probe = altera_spi_probe,
+};
+
+static int altera_spi_driver_init(void)
+{
+ return register_driver(&altera_spi_driver);
+}
+
+device_initcall(altera_spi_driver_init);
--
1.7.6
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2011-07-30 20:18 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-30 20:18 franck.jullien [this message]
2011-07-31 15:46 ` Hubert Feurstein
2011-08-01 8:15 ` Sascha Hauer
2011-08-01 8:35 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1312057103-29658-1-git-send-email-franck.jullien@gmail.com \
--to=franck.jullien@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox