From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-fx0-f49.google.com ([209.85.161.49]) by canuck.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1QrcqP-0006fS-50 for barebox@lists.infradead.org; Thu, 11 Aug 2011 21:31:19 +0000 Received: by fxd20 with SMTP id 20so2558706fxd.36 for ; Thu, 11 Aug 2011 14:31:11 -0700 (PDT) From: Antony Pavlov Date: Fri, 12 Aug 2011 01:30:55 +0400 Message-Id: <1313098255-5676-1-git-send-email-antonynpavlov@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [RFC 1/5] PCI: initial commit (draft) To: barebox@lists.infradead.org used shorten version of linux-2.6.39 pci_ids.h Signed-off-by: Antony Pavlov --- drivers/Makefile | 1 + drivers/pci/Kconfig | 12 + drivers/pci/Makefile | 8 + drivers/pci/pci.c | 344 +++++++++++++++++++ include/linux/mod_devicetable.h | 24 ++ include/linux/pci.h | 201 +++++++++++ include/linux/pci_ids.h | 136 ++++++++ include/linux/pci_regs.h | 698 +++++++++++++++++++++++++++++++++++++++ 8 files changed, 1424 insertions(+), 0 deletions(-) create mode 100644 drivers/pci/Kconfig create mode 100644 drivers/pci/Makefile create mode 100644 drivers/pci/pci.c create mode 100644 include/linux/mod_devicetable.h create mode 100644 include/linux/pci.h create mode 100644 include/linux/pci_ids.h create mode 100644 include/linux/pci_regs.h diff --git a/drivers/Makefile b/drivers/Makefile index 16b3bb1..4be74b4 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -13,3 +13,4 @@ obj-y += clk/ obj-y += mfd/ obj-$(CONFIG_LED) += led/ obj-y += eeprom/ +obj-$(CONFIG_PCI) += pci/ diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig new file mode 100644 index 0000000..88b8dfb --- /dev/null +++ b/drivers/pci/Kconfig @@ -0,0 +1,12 @@ +# +# PCI configuration +# +config PCI_DEBUG + bool "PCI Debugging" + depends on PCI + help + Say Y here if you want the PCI core to produce a bunch of debug + messages to the system log. Select this if you are having a + problem with PCI support and want to see more of what is going on. + + When in doubt, say N. diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile new file mode 100644 index 0000000..69aba36 --- /dev/null +++ b/drivers/pci/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the PCI bus specific drivers. +# +obj-y += pci.o + +ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG + +CPPFLAGS += $(ccflags-y) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c new file mode 100644 index 0000000..872c2ba --- /dev/null +++ b/drivers/pci/pci.c @@ -0,0 +1,344 @@ +#include +#include +#include + +#include +#include + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +unsigned int pci_scan_bus(struct pci_bus *bus); + +static struct pci_controller *hose_head, **hose_tail = &hose_head; + +struct pci_bus *pci_root; +struct pci_dev *pci_devices = NULL; +static struct pci_dev **pci_last_dev_p = &pci_devices; + +static struct pci_bus * pci_alloc_bus(void) +{ + struct pci_bus *b; + + b = kzalloc(sizeof(*b), GFP_KERNEL); + if (b) { + INIT_LIST_HEAD(&b->node); + INIT_LIST_HEAD(&b->children); + INIT_LIST_HEAD(&b->devices); + INIT_LIST_HEAD(&b->slots); + INIT_LIST_HEAD(&b->resources); + //b->max_bus_speed = PCI_SPEED_UNKNOWN; + //b->cur_bus_speed = PCI_SPEED_UNKNOWN; + } + return b; +} + +void register_pci_controller(struct pci_controller *hose) +{ + struct pci_bus *bus; + + printf("PCI: register_pci_controller() \n"); + + *hose_tail = hose; + hose_tail = &hose->next; + + bus = pci_alloc_bus(); + hose->bus = bus; + bus->ops = hose->pci_ops; + bus->resource[0] = hose->mem_resource; + bus->resource[1] = hose->io_resource; + + pci_scan_bus(bus); + + pci_root = bus; + + return; +} + +int +pci_bus_read_config_byte(struct pci_bus *bus, unsigned int devfn, u8 where, u8 *val) +{ + u32 data; + int status; + + status = bus->ops->read(bus, devfn, where & 0xfc, 4, &data); + *val = (u8) (data >> ((where & 3) << 3)); + return status; +} + +int +pci_bus_read_config_word(struct pci_bus *bus, unsigned int devfn, u8 where, u16 *val) +{ + u32 data; + int status; + + status = bus->ops->read(bus, devfn, where & 0xfc, 4, &data); + *val = (u16) (data >> ((where & 3) << 3)); + return status; +} + +int +pci_bus_read_config_dword(struct pci_bus *bus, unsigned int devfn, u8 where, u32 *val) +{ + return bus->ops->read(bus, devfn, where, 4, val); +} + +int +pci_bus_write_config_byte(struct pci_bus *bus, unsigned int devfn, u8 where, u8 val) +{ + u32 data; + int status; + + bus->ops->read(bus, devfn, where & 0xfc, 4, &data); + data = (data & ~(0xff << ((where & 3) << 3))) | (val << ((where & 3) << 3)); + status = bus->ops->write(bus, devfn, where & 0xfc, 4, data); + + return status; +} + +int +pci_bus_write_config_word(struct pci_bus *bus, unsigned int devfn, u8 where, u16 val) +{ + u32 data; + int status; + + bus->ops->read(bus, devfn, where & 0xfc, 4, &data); + data = (data & ~(0xffff << ((where & 3) << 3))) | (val << ((where & 3) << 3)); + status = bus->ops->write(bus, devfn, where & 0xfc, 4, data); + + return status; +} + +int +pci_bus_write_config_dword(struct pci_bus *bus, unsigned int devfn, u8 where, u32 val) +{ + return bus->ops->write(bus, devfn, where, 4, val); +} + +int +pci_read_config_byte(struct pci_dev *dev, u8 where, u8 *val) +{ + return pci_bus_read_config_byte(dev->bus, dev->devfn, where, val); +} + +int +pci_read_config_word(struct pci_dev *dev, u8 where, u16 *val) +{ + return pci_bus_read_config_word(dev->bus, dev->devfn, where, val); +} + +int +pci_read_config_dword(struct pci_dev *dev, u8 where, u32 *val) +{ + return pci_bus_read_config_dword(dev->bus, dev->devfn, where, val); +} + +int +pci_write_config_byte(struct pci_dev *dev, u8 where, u8 val) +{ + return pci_bus_write_config_byte(dev->bus, dev->devfn, where, val); +} + +int +pci_write_config_word(struct pci_dev *dev, u8 where, u16 val) +{ + return pci_bus_write_config_word(dev->bus, dev->devfn, where, val); +} + +int +pci_write_config_dword(struct pci_dev *dev, u8 where, u32 val) +{ + return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val); +} + +struct pci_dev *alloc_pci_dev(void) +{ + struct pci_dev *dev; + + dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL); + if (!dev) + return NULL; + + INIT_LIST_HEAD(&dev->bus_list); + + return dev; +} + +unsigned int pci_scan_bus(struct pci_bus *bus) +{ + unsigned int devfn, l, max, class; + unsigned char cmd, irq, tmp, hdr_type, is_multi = 0; + struct pci_dev *dev, **bus_last; + struct pci_bus *child; + resource_size_t last_mem; + resource_size_t last_io; + + //last_mem = bus->ops->res_start(bus, + last_mem = bus->resource[0]->start; + last_io = bus->resource[1]->start; + last_io += 0x1000; // HACK --- skip serial port + + DBG("pci_scan_bus for bus %d\n", bus->number); + DBG(" last_io = 0x%08x, last_mem = 0x%08x\n", last_io, last_mem); + bus_last = &bus->devices; + max = bus->secondary; + + for (devfn = 0; devfn < 0xff; ++devfn) { + if (PCI_FUNC(devfn) && !is_multi) { + /* not a multi-function device */ + continue; + } + if (pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &hdr_type)) + continue; + if (!PCI_FUNC(devfn)) + is_multi = hdr_type & 0x80; + + if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l) || + /* some broken boards return 0 if a slot is empty: */ + l == 0xffffffff || l == 0x00000000 || l == 0x0000ffff || l == 0xffff0000) + continue; + + dev = alloc_pci_dev(); + if (!dev) + return 0; + + dev->bus = bus; + dev->devfn = devfn; + dev->vendor = l & 0xffff; + dev->device = (l >> 16) & 0xffff; + + /* non-destructively determine if device can be a master: */ + pci_read_config_byte(dev, PCI_COMMAND, &cmd); + pci_write_config_byte(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER); + pci_read_config_byte(dev, PCI_COMMAND, &tmp); + //dev->master = ((tmp & PCI_COMMAND_MASTER) != 0); + pci_write_config_byte(dev, PCI_COMMAND, cmd); + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &class); + dev->revision = class & 0xff; + class >>= 8; /* upper 3 bytes */ + dev->class = class; + class >>= 8; + dev->hdr_type = hdr_type; + + DBG("PCI: class = %08x, hdr_type = %08x\n", class, hdr_type); + + switch (hdr_type & 0x7f) { /* header type */ + case PCI_HEADER_TYPE_NORMAL: /* standard header */ + if (class == PCI_CLASS_BRIDGE_PCI) + goto bad; + /* + * If the card generates interrupts, read IRQ number + * (some architectures change it during pcibios_fixup()) + */ + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq); + if (irq) + pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); + dev->irq = irq; + /* + * read base address registers, again pcibios_fixup() can + * tweak these + */ + // pci_read_bases(dev, 6); + pci_read_config_dword(dev, PCI_ROM_ADDRESS, &l); + dev->rom_address = (l == 0xffffffff) ? 0 : l; + break; + #if 0 + case PCI_HEADER_TYPE_BRIDGE: /* bridge header */ + if (class != PCI_CLASS_BRIDGE_PCI) + goto bad; + pci_read_bases(dev, 2); + pcibios_read_config_dword(bus->number, devfn, PCI_ROM_ADDRESS1, &l); + dev->rom_address = (l == 0xffffffff) ? 0 : l; + break; + case PCI_HEADER_TYPE_CARDBUS: /* CardBus bridge header */ + if (class != PCI_CLASS_BRIDGE_CARDBUS) + goto bad; + pci_read_bases(dev, 1); + break; +#endif + default: /* unknown header */ + bad: + printk(KERN_ERR "PCI: %02x:%02x [%04x/%04x/%06x] has unknown header type %02x, ignoring.\n", + bus->number, dev->devfn, dev->vendor, dev->device, class, hdr_type); + continue; + } + + DBG("PCI: %02x:%02x [%04x/%04x]\n", bus->number, dev->devfn, dev->vendor, dev->device); + + list_add_tail(&dev->bus_list, &bus->devices); + + if (class == PCI_CLASS_BRIDGE_HOST) { + DBG("PCI: skip pci host bridge\n"); + continue; + } + + { + int bar; + u32 old_bar, mask; + int size; + + for (bar = 0; bar < 6; bar++) { + pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, &old_bar); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, 0xfffffffe); + pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, &mask); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, old_bar); + + if (mask == 0 || mask == 0xffffffff) { + //DBG(" PCI: pbar%d set bad mask\n", bar); + continue; + } + + if (mask & 0x01) { /* IO */ + size = -(mask & 0xfffffffe); + DBG(" PCI: pbar%d: mask=%08x io %d bytes\n", bar, mask, size); + DBG(" mapped to 0x%08x (0x%08x)\n", last_io, bus->ops->res_start(bus, last_io)); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, last_io); + last_io += size; + + } else { /* MEM */ + size = -(mask & 0xfffffff0); + DBG(" PCI: pbar%d: mask=%08x memory %d bytes\n", bar, mask, size); + DBG(" mapped to 0x%08x (0x%08x)\n", last_mem, bus->ops->res_start(bus, last_mem)); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, last_mem); + last_mem += size; + } + } + } + } + + /* + * After performing arch-dependent fixup of the bus, look behind + * all PCI-to-PCI bridges on this bus. + */ + //pcibios_fixup_bus(bus); + + /* + * We've scanned the bus and so we know all about what's on + * the other side of any bridges that may be on this bus plus + * any devices. + * + * Return how far we've got finding sub-buses. + */ + DBG("PCI: pci_scan_bus returning with max=%02x\n", max); + return max; +} + +static int pci_init(void) +{ + pcibios_init(); + + if (!pci_present()) { + printf("PCI: No PCI bus detected\n"); + return 0; + } + + /* give BIOS a chance to apply platform specific fixes: */ + //pcibios_fixup(); + + return 0; +} +postcore_initcall(pci_init); diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h new file mode 100644 index 0000000..911e461 --- /dev/null +++ b/include/linux/mod_devicetable.h @@ -0,0 +1,24 @@ +/* + * Device tables which are exported to userspace via + * scripts/mod/file2alias.c. You must keep that file in sync with this + * header. + */ + +#ifndef LINUX_MOD_DEVICETABLE_H +#define LINUX_MOD_DEVICETABLE_H + +#ifdef __KERNEL__ +#include +typedef unsigned long kernel_ulong_t; +#endif + +#define PCI_ANY_ID (~0) + +struct pci_device_id { + __u32 vendor, device; /* Vendor and device ID or PCI_ANY_ID*/ + __u32 subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */ + __u32 class, class_mask; /* (class,subclass,prog-if) triplet */ + kernel_ulong_t driver_data; /* Data private to the driver */ +}; + +#endif /* LINUX_MOD_DEVICETABLE_H */ diff --git a/include/linux/pci.h b/include/linux/pci.h new file mode 100644 index 0000000..bcec585 --- /dev/null +++ b/include/linux/pci.h @@ -0,0 +1,201 @@ +/* + * pci.h + * + * PCI defines and function prototypes + * Copyright 1994, Drew Eckhardt + * Copyright 1997--1999 Martin Mares + * + * For more information, please consult the following manuals (look at + * http://www.pcisig.com/ for how to get them): + * + * PCI BIOS Specification + * PCI Local Bus Specification + * PCI to PCI Bridge Specification + * PCI System Design Guide + */ + +#ifndef LINUX_PCI_H +#define LINUX_PCI_H + +#include /* The pci register defines */ + +/* + * The PCI interface treats multi-function devices as independent + * devices. The slot/function address of each device is encoded + * in a single byte as follows: + * + * 7:3 = slot + * 2:0 = function + */ +#define PCI_DEVFN(slot, func) ((((slot) & 0x1f) << 3) | ((func) & 0x07)) +#define PCI_SLOT(devfn) (((devfn) >> 3) & 0x1f) +#define PCI_FUNC(devfn) ((devfn) & 0x07) + +/* Ioctls for /proc/bus/pci/X/Y nodes. */ +#define PCIIOC_BASE ('P' << 24 | 'C' << 16 | 'I' << 8) +#define PCIIOC_CONTROLLER (PCIIOC_BASE | 0x00) /* Get controller for PCI device. */ +#define PCIIOC_MMAP_IS_IO (PCIIOC_BASE | 0x01) /* Set mmap state to I/O space. */ +#define PCIIOC_MMAP_IS_MEM (PCIIOC_BASE | 0x02) /* Set mmap state to MEM space. */ +#define PCIIOC_WRITE_COMBINE (PCIIOC_BASE | 0x03) /* Enable/disable write-combining. */ + +#ifdef __KERNEL__ + +#include + +#include +#include +#include +#include +#include +#include +//#include +//#include +//#include +#include +//#include + +/* Include the ID list */ +#include + +/* Include architecture-dependent settings and functions */ + +//#include + +/* + * Error values that may be returned by PCI functions. + */ +#define PCIBIOS_SUCCESSFUL 0x00 +#define PCIBIOS_FUNC_NOT_SUPPORTED 0x81 +#define PCIBIOS_BAD_VENDOR_ID 0x83 +#define PCIBIOS_DEVICE_NOT_FOUND 0x86 +#define PCIBIOS_BAD_REGISTER_NUMBER 0x87 +#define PCIBIOS_SET_FAILED 0x88 +#define PCIBIOS_BUFFER_TOO_SMALL 0x89 + +#define DEVICE_COUNT_RESOURCE 12 +#define PCI_BRIDGE_RESOURCE_NUM 2 +/* + * There is one pci_dev structure for each slot-number/function-number + * combination: + */ +struct pci_dev { + struct list_head bus_list; /* node in per-bus list */ + struct pci_bus *bus; /* bus this device is on */ + struct pci_bus *subordinate; /* bus this device bridges to */ + + void *sysdata; /* hook for sys-specific extension */ + struct proc_dir_entry *procent; /* device entry in /proc/bus/pci */ + struct pci_slot *slot; /* Physical slot this device is in */ + + unsigned int devfn; /* encoded device & function index */ + unsigned short vendor; + unsigned short device; + unsigned short subsystem_vendor; + unsigned short subsystem_device; + unsigned int class; /* 3 bytes: (base,sub,prog-if) */ + u8 revision; /* PCI revision, low byte of class word */ + u8 hdr_type; /* PCI header type (`multi' flag masked out) */ + u8 pcie_cap; /* PCI-E capability offset */ + u8 pcie_type; /* PCI-E device/port type */ + u8 rom_base_reg; /* which config register controls the ROM */ + u8 pin; /* which interrupt pin this device uses */ + + /* + * In theory, the irq level can be read from configuration + * space and all would be fine. However, old PCI chips don't + * support these registers and return 0 instead. For example, + * the Vision864-P rev 0 chip can uses INTA, but returns 0 in + * the interrupt line and pin registers. pci_init() + * initializes this field with the value at PCI_INTERRUPT_LINE + * and it is the job of pcibios_fixup() to change it if + * necessary. The field must not be 0 unless the device + * cannot generate interrupts at all. + */ + unsigned int irq; /* irq generated by this device */ + struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */ + + /* Base registers for this device, can be adjusted by + * pcibios_fixup() as necessary. + */ + unsigned long base_address[6]; + unsigned long rom_address; +}; + +struct pci_bus { + struct list_head node; /* node in list of buses */ + struct pci_bus *parent; /* parent bus this bridge is on */ + struct list_head children; /* list of child buses */ + struct list_head devices; /* list of devices on this bus */ + struct pci_dev *self; /* bridge device as seen by parent */ + struct list_head slots; /* list of slots on this bus */ + struct resource *resource[PCI_BRIDGE_RESOURCE_NUM]; + struct list_head resources; /* address space routed to this bus */ + + struct pci_ops *ops; /* configuration access functions */ + void *sysdata; /* hook for sys-specific extension */ + struct proc_dir_entry *procdir; /* directory entry in /proc/bus/pci */ + + unsigned char number; /* bus number */ + unsigned char primary; /* number of primary bridge */ + unsigned char secondary; /* number of secondary bridge */ + unsigned char subordinate; /* max number of subordinate buses */ + unsigned char max_bus_speed; /* enum pci_bus_speed */ + unsigned char cur_bus_speed; /* enum pci_bus_speed */ + + char name[48]; +}; + +/* Low-level architecture-dependent routines */ + +struct pci_ops { + int (*read)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val); + int (*write)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val); + + /* return memory address for pci resource */ + int (*res_start)(struct pci_bus *bus, resource_size_t res_addr); +}; + +extern struct pci_ops * pci_ops; + +static inline int pci_present() +{ + return 1; +} + +#ifndef PCIBIOS_MAX_MEM_32 +#define PCIBIOS_MAX_MEM_32 (-1) +#endif + +/* + * Each pci channel is a top-level PCI bus seem by CPU. A machine with + * multiple PCI channels may have multiple PCI host controllers or a + * single controller supporting multiple channels. + */ +struct pci_controller { + struct pci_controller *next; + struct pci_bus *bus; + + struct pci_ops *pci_ops; + struct resource *mem_resource; + unsigned long mem_offset; + struct resource *io_resource; + unsigned long io_offset; + unsigned long io_map_base; + + unsigned int index; + /* For compatibility with current (as of July 2003) pciutils + and XFree86. Eventually will be removed. */ + unsigned int need_domain_info; + + int iommu; + + /* Optional access methods for reading/writing the bus number + of the PCI controller */ + int (*get_busno)(void); + void (*set_busno)(int busno); +}; + +extern void register_pci_controller(struct pci_controller *hose); + +#endif /* __KERNEL__ */ +#endif /* LINUX_PCI_H */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h new file mode 100644 index 0000000..49e2954 --- /dev/null +++ b/include/linux/pci_ids.h @@ -0,0 +1,136 @@ +/* + * PCI Class, Vendor and Device IDs + * + * Please keep sorted. + * + * Do not add new entries to this file unless the definitions + * are shared between multiple drivers. + */ + +/* Device classes and subclasses */ + +#define PCI_CLASS_NOT_DEFINED 0x0000 +#define PCI_CLASS_NOT_DEFINED_VGA 0x0001 + +#define PCI_BASE_CLASS_STORAGE 0x01 +#define PCI_CLASS_STORAGE_SCSI 0x0100 +#define PCI_CLASS_STORAGE_IDE 0x0101 +#define PCI_CLASS_STORAGE_FLOPPY 0x0102 +#define PCI_CLASS_STORAGE_IPI 0x0103 +#define PCI_CLASS_STORAGE_RAID 0x0104 +#define PCI_CLASS_STORAGE_SATA 0x0106 +#define PCI_CLASS_STORAGE_SATA_AHCI 0x010601 +#define PCI_CLASS_STORAGE_SAS 0x0107 +#define PCI_CLASS_STORAGE_OTHER 0x0180 + +#define PCI_BASE_CLASS_NETWORK 0x02 +#define PCI_CLASS_NETWORK_ETHERNET 0x0200 +#define PCI_CLASS_NETWORK_TOKEN_RING 0x0201 +#define PCI_CLASS_NETWORK_FDDI 0x0202 +#define PCI_CLASS_NETWORK_ATM 0x0203 +#define PCI_CLASS_NETWORK_OTHER 0x0280 + +#define PCI_BASE_CLASS_DISPLAY 0x03 +#define PCI_CLASS_DISPLAY_VGA 0x0300 +#define PCI_CLASS_DISPLAY_XGA 0x0301 +#define PCI_CLASS_DISPLAY_3D 0x0302 +#define PCI_CLASS_DISPLAY_OTHER 0x0380 + +#define PCI_BASE_CLASS_MULTIMEDIA 0x04 +#define PCI_CLASS_MULTIMEDIA_VIDEO 0x0400 +#define PCI_CLASS_MULTIMEDIA_AUDIO 0x0401 +#define PCI_CLASS_MULTIMEDIA_PHONE 0x0402 +#define PCI_CLASS_MULTIMEDIA_OTHER 0x0480 + +#define PCI_BASE_CLASS_MEMORY 0x05 +#define PCI_CLASS_MEMORY_RAM 0x0500 +#define PCI_CLASS_MEMORY_FLASH 0x0501 +#define PCI_CLASS_MEMORY_OTHER 0x0580 + +#define PCI_BASE_CLASS_BRIDGE 0x06 +#define PCI_CLASS_BRIDGE_HOST 0x0600 +#define PCI_CLASS_BRIDGE_ISA 0x0601 +#define PCI_CLASS_BRIDGE_EISA 0x0602 +#define PCI_CLASS_BRIDGE_MC 0x0603 +#define PCI_CLASS_BRIDGE_PCI 0x0604 +#define PCI_CLASS_BRIDGE_PCMCIA 0x0605 +#define PCI_CLASS_BRIDGE_NUBUS 0x0606 +#define PCI_CLASS_BRIDGE_CARDBUS 0x0607 +#define PCI_CLASS_BRIDGE_RACEWAY 0x0608 +#define PCI_CLASS_BRIDGE_OTHER 0x0680 + +#define PCI_BASE_CLASS_COMMUNICATION 0x07 +#define PCI_CLASS_COMMUNICATION_SERIAL 0x0700 +#define PCI_CLASS_COMMUNICATION_PARALLEL 0x0701 +#define PCI_CLASS_COMMUNICATION_MULTISERIAL 0x0702 +#define PCI_CLASS_COMMUNICATION_MODEM 0x0703 +#define PCI_CLASS_COMMUNICATION_OTHER 0x0780 + +#define PCI_BASE_CLASS_SYSTEM 0x08 +#define PCI_CLASS_SYSTEM_PIC 0x0800 +#define PCI_CLASS_SYSTEM_PIC_IOAPIC 0x080010 +#define PCI_CLASS_SYSTEM_PIC_IOXAPIC 0x080020 +#define PCI_CLASS_SYSTEM_DMA 0x0801 +#define PCI_CLASS_SYSTEM_TIMER 0x0802 +#define PCI_CLASS_SYSTEM_RTC 0x0803 +#define PCI_CLASS_SYSTEM_PCI_HOTPLUG 0x0804 +#define PCI_CLASS_SYSTEM_SDHCI 0x0805 +#define PCI_CLASS_SYSTEM_OTHER 0x0880 + +#define PCI_BASE_CLASS_INPUT 0x09 +#define PCI_CLASS_INPUT_KEYBOARD 0x0900 +#define PCI_CLASS_INPUT_PEN 0x0901 +#define PCI_CLASS_INPUT_MOUSE 0x0902 +#define PCI_CLASS_INPUT_SCANNER 0x0903 +#define PCI_CLASS_INPUT_GAMEPORT 0x0904 +#define PCI_CLASS_INPUT_OTHER 0x0980 + +#define PCI_BASE_CLASS_DOCKING 0x0a +#define PCI_CLASS_DOCKING_GENERIC 0x0a00 +#define PCI_CLASS_DOCKING_OTHER 0x0a80 + +#define PCI_BASE_CLASS_PROCESSOR 0x0b +#define PCI_CLASS_PROCESSOR_386 0x0b00 +#define PCI_CLASS_PROCESSOR_486 0x0b01 +#define PCI_CLASS_PROCESSOR_PENTIUM 0x0b02 +#define PCI_CLASS_PROCESSOR_ALPHA 0x0b10 +#define PCI_CLASS_PROCESSOR_POWERPC 0x0b20 +#define PCI_CLASS_PROCESSOR_MIPS 0x0b30 +#define PCI_CLASS_PROCESSOR_CO 0x0b40 + +#define PCI_BASE_CLASS_SERIAL 0x0c +#define PCI_CLASS_SERIAL_FIREWIRE 0x0c00 +#define PCI_CLASS_SERIAL_FIREWIRE_OHCI 0x0c0010 +#define PCI_CLASS_SERIAL_ACCESS 0x0c01 +#define PCI_CLASS_SERIAL_SSA 0x0c02 +#define PCI_CLASS_SERIAL_USB 0x0c03 +#define PCI_CLASS_SERIAL_USB_UHCI 0x0c0300 +#define PCI_CLASS_SERIAL_USB_OHCI 0x0c0310 +#define PCI_CLASS_SERIAL_USB_EHCI 0x0c0320 +#define PCI_CLASS_SERIAL_USB_XHCI 0x0c0330 +#define PCI_CLASS_SERIAL_FIBER 0x0c04 +#define PCI_CLASS_SERIAL_SMBUS 0x0c05 + +#define PCI_BASE_CLASS_WIRELESS 0x0d +#define PCI_CLASS_WIRELESS_RF_CONTROLLER 0x0d10 +#define PCI_CLASS_WIRELESS_WHCI 0x0d1010 + +#define PCI_BASE_CLASS_INTELLIGENT 0x0e +#define PCI_CLASS_INTELLIGENT_I2O 0x0e00 + +#define PCI_BASE_CLASS_SATELLITE 0x0f +#define PCI_CLASS_SATELLITE_TV 0x0f00 +#define PCI_CLASS_SATELLITE_AUDIO 0x0f01 +#define PCI_CLASS_SATELLITE_VOICE 0x0f03 +#define PCI_CLASS_SATELLITE_DATA 0x0f04 + +#define PCI_BASE_CLASS_CRYPT 0x10 +#define PCI_CLASS_CRYPT_NETWORK 0x1000 +#define PCI_CLASS_CRYPT_ENTERTAINMENT 0x1001 +#define PCI_CLASS_CRYPT_OTHER 0x1080 + +#define PCI_BASE_CLASS_SIGNAL_PROCESSING 0x11 +#define PCI_CLASS_SP_DPIO 0x1100 +#define PCI_CLASS_SP_OTHER 0x1180 + +#define PCI_CLASS_OTHERS 0xff diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h new file mode 100644 index 0000000..be01380 --- /dev/null +++ b/include/linux/pci_regs.h @@ -0,0 +1,698 @@ +/* + * pci_regs.h + * + * PCI standard defines + * Copyright 1994, Drew Eckhardt + * Copyright 1997--1999 Martin Mares + * + * For more information, please consult the following manuals (look at + * http://www.pcisig.com/ for how to get them): + * + * PCI BIOS Specification + * PCI Local Bus Specification + * PCI to PCI Bridge Specification + * PCI System Design Guide + * + * For hypertransport information, please consult the following manuals + * from http://www.hypertransport.org + * + * The Hypertransport I/O Link Specification + */ + +#ifndef LINUX_PCI_REGS_H +#define LINUX_PCI_REGS_H + +/* + * Under PCI, each device has 256 bytes of configuration address space, + * of which the first 64 bytes are standardized as follows: + */ +#define PCI_VENDOR_ID 0x00 /* 16 bits */ +#define PCI_DEVICE_ID 0x02 /* 16 bits */ +#define PCI_COMMAND 0x04 /* 16 bits */ +#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */ +#define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */ +#define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */ +#define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */ +#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */ +#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */ +#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */ +#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */ +#define PCI_COMMAND_SERR 0x100 /* Enable SERR */ +#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */ +#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */ + +#define PCI_STATUS 0x06 /* 16 bits */ +#define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */ +#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */ +#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */ +#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */ +#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */ +#define PCI_STATUS_PARITY 0x100 /* Detected parity error */ +#define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */ +#define PCI_STATUS_DEVSEL_FAST 0x000 +#define PCI_STATUS_DEVSEL_MEDIUM 0x200 +#define PCI_STATUS_DEVSEL_SLOW 0x400 +#define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */ +#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */ +#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */ +#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */ +#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */ + +#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 revision */ +#define PCI_REVISION_ID 0x08 /* Revision ID */ +#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */ +#define PCI_CLASS_DEVICE 0x0a /* Device class */ + +#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */ +#define PCI_LATENCY_TIMER 0x0d /* 8 bits */ +#define PCI_HEADER_TYPE 0x0e /* 8 bits */ +#define PCI_HEADER_TYPE_NORMAL 0 +#define PCI_HEADER_TYPE_BRIDGE 1 +#define PCI_HEADER_TYPE_CARDBUS 2 + +#define PCI_BIST 0x0f /* 8 bits */ +#define PCI_BIST_CODE_MASK 0x0f /* Return result */ +#define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */ +#define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */ + +/* + * Base addresses specify locations in memory or I/O space. + * Decoded size can be determined by writing a value of + * 0xffffffff to the register, and reading it back. Only + * 1 bits are decoded. + */ +#define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */ +#define PCI_BASE_ADDRESS_1 0x14 /* 32 bits [htype 0,1 only] */ +#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */ +#define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */ +#define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */ +#define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */ +#define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */ +#define PCI_BASE_ADDRESS_SPACE_IO 0x01 +#define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00 +#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06 +#define PCI_BASE_ADDRESS_MEM_TYPE_32 0x00 /* 32 bit address */ +#define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */ +#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */ +#define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */ +#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL) +#define PCI_BASE_ADDRESS_IO_MASK (~0x03UL) +/* bit 1 is reserved if address_space = 1 */ + +/* Header type 0 (normal devices) */ +#define PCI_CARDBUS_CIS 0x28 +#define PCI_SUBSYSTEM_VENDOR_ID 0x2c +#define PCI_SUBSYSTEM_ID 0x2e +#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */ +#define PCI_ROM_ADDRESS_ENABLE 0x01 +#define PCI_ROM_ADDRESS_MASK (~0x7ffUL) + +#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */ + +/* 0x35-0x3b are reserved */ +#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */ +#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */ +#define PCI_MIN_GNT 0x3e /* 8 bits */ +#define PCI_MAX_LAT 0x3f /* 8 bits */ + +/* Header type 1 (PCI-to-PCI bridges) */ +#define PCI_PRIMARY_BUS 0x18 /* Primary bus number */ +#define PCI_SECONDARY_BUS 0x19 /* Secondary bus number */ +#define PCI_SUBORDINATE_BUS 0x1a /* Highest bus number behind the bridge */ +#define PCI_SEC_LATENCY_TIMER 0x1b /* Latency timer for secondary interface */ +#define PCI_IO_BASE 0x1c /* I/O range behind the bridge */ +#define PCI_IO_LIMIT 0x1d +#define PCI_IO_RANGE_TYPE_MASK 0x0fUL /* I/O bridging type */ +#define PCI_IO_RANGE_TYPE_16 0x00 +#define PCI_IO_RANGE_TYPE_32 0x01 +#define PCI_IO_RANGE_MASK (~0x0fUL) +#define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */ +#define PCI_MEMORY_BASE 0x20 /* Memory range behind */ +#define PCI_MEMORY_LIMIT 0x22 +#define PCI_MEMORY_RANGE_TYPE_MASK 0x0fUL +#define PCI_MEMORY_RANGE_MASK (~0x0fUL) +#define PCI_PREF_MEMORY_BASE 0x24 /* Prefetchable memory range behind */ +#define PCI_PREF_MEMORY_LIMIT 0x26 +#define PCI_PREF_RANGE_TYPE_MASK 0x0fUL +#define PCI_PREF_RANGE_TYPE_32 0x00 +#define PCI_PREF_RANGE_TYPE_64 0x01 +#define PCI_PREF_RANGE_MASK (~0x0fUL) +#define PCI_PREF_BASE_UPPER32 0x28 /* Upper half of prefetchable memory range */ +#define PCI_PREF_LIMIT_UPPER32 0x2c +#define PCI_IO_BASE_UPPER16 0x30 /* Upper half of I/O addresses */ +#define PCI_IO_LIMIT_UPPER16 0x32 +/* 0x34 same as for htype 0 */ +/* 0x35-0x3b is reserved */ +#define PCI_ROM_ADDRESS1 0x38 /* Same as PCI_ROM_ADDRESS, but for htype 1 */ +/* 0x3c-0x3d are same as for htype 0 */ +#define PCI_BRIDGE_CONTROL 0x3e +#define PCI_BRIDGE_CTL_PARITY 0x01 /* Enable parity detection on secondary interface */ +#define PCI_BRIDGE_CTL_SERR 0x02 /* The same for SERR forwarding */ +#define PCI_BRIDGE_CTL_ISA 0x04 /* Enable ISA mode */ +#define PCI_BRIDGE_CTL_VGA 0x08 /* Forward VGA addresses */ +#define PCI_BRIDGE_CTL_MASTER_ABORT 0x20 /* Report master aborts */ +#define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */ +#define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */ + +/* Header type 2 (CardBus bridges) */ +#define PCI_CB_CAPABILITY_LIST 0x14 +/* 0x15 reserved */ +#define PCI_CB_SEC_STATUS 0x16 /* Secondary status */ +#define PCI_CB_PRIMARY_BUS 0x18 /* PCI bus number */ +#define PCI_CB_CARD_BUS 0x19 /* CardBus bus number */ +#define PCI_CB_SUBORDINATE_BUS 0x1a /* Subordinate bus number */ +#define PCI_CB_LATENCY_TIMER 0x1b /* CardBus latency timer */ +#define PCI_CB_MEMORY_BASE_0 0x1c +#define PCI_CB_MEMORY_LIMIT_0 0x20 +#define PCI_CB_MEMORY_BASE_1 0x24 +#define PCI_CB_MEMORY_LIMIT_1 0x28 +#define PCI_CB_IO_BASE_0 0x2c +#define PCI_CB_IO_BASE_0_HI 0x2e +#define PCI_CB_IO_LIMIT_0 0x30 +#define PCI_CB_IO_LIMIT_0_HI 0x32 +#define PCI_CB_IO_BASE_1 0x34 +#define PCI_CB_IO_BASE_1_HI 0x36 +#define PCI_CB_IO_LIMIT_1 0x38 +#define PCI_CB_IO_LIMIT_1_HI 0x3a +#define PCI_CB_IO_RANGE_MASK (~0x03UL) +/* 0x3c-0x3d are same as for htype 0 */ +#define PCI_CB_BRIDGE_CONTROL 0x3e +#define PCI_CB_BRIDGE_CTL_PARITY 0x01 /* Similar to standard bridge control register */ +#define PCI_CB_BRIDGE_CTL_SERR 0x02 +#define PCI_CB_BRIDGE_CTL_ISA 0x04 +#define PCI_CB_BRIDGE_CTL_VGA 0x08 +#define PCI_CB_BRIDGE_CTL_MASTER_ABORT 0x20 +#define PCI_CB_BRIDGE_CTL_CB_RESET 0x40 /* CardBus reset */ +#define PCI_CB_BRIDGE_CTL_16BIT_INT 0x80 /* Enable interrupt for 16-bit cards */ +#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100 /* Prefetch enable for both memory regions */ +#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200 +#define PCI_CB_BRIDGE_CTL_POST_WRITES 0x400 +#define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40 +#define PCI_CB_SUBSYSTEM_ID 0x42 +#define PCI_CB_LEGACY_MODE_BASE 0x44 /* 16-bit PC Card legacy mode base address (ExCa) */ +/* 0x48-0x7f reserved */ + +/* Capability lists */ + +#define PCI_CAP_LIST_ID 0 /* Capability ID */ +#define PCI_CAP_ID_PM 0x01 /* Power Management */ +#define PCI_CAP_ID_AGP 0x02 /* Accelerated Graphics Port */ +#define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */ +#define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */ +#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */ +#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */ +#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */ +#define PCI_CAP_ID_HT 0x08 /* HyperTransport */ +#define PCI_CAP_ID_VNDR 0x09 /* Vendor specific */ +#define PCI_CAP_ID_DBG 0x0A /* Debug port */ +#define PCI_CAP_ID_CCRC 0x0B /* CompactPCI Central Resource Control */ +#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */ +#define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */ +#define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */ +#define PCI_CAP_ID_EXP 0x10 /* PCI Express */ +#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */ +#define PCI_CAP_ID_AF 0x13 /* PCI Advanced Features */ +#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */ +#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */ +#define PCI_CAP_SIZEOF 4 + +/* Power Management Registers */ + +#define PCI_PM_PMC 2 /* PM Capabilities Register */ +#define PCI_PM_CAP_VER_MASK 0x0007 /* Version */ +#define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */ +#define PCI_PM_CAP_RESERVED 0x0010 /* Reserved field */ +#define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */ +#define PCI_PM_CAP_AUX_POWER 0x01C0 /* Auxiliary power support mask */ +#define PCI_PM_CAP_D1 0x0200 /* D1 power state support */ +#define PCI_PM_CAP_D2 0x0400 /* D2 power state support */ +#define PCI_PM_CAP_PME 0x0800 /* PME pin supported */ +#define PCI_PM_CAP_PME_MASK 0xF800 /* PME Mask of all supported states */ +#define PCI_PM_CAP_PME_D0 0x0800 /* PME# from D0 */ +#define PCI_PM_CAP_PME_D1 0x1000 /* PME# from D1 */ +#define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */ +#define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */ +#define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */ +#define PCI_PM_CAP_PME_SHIFT 11 /* Start of the PME Mask in PMC */ +#define PCI_PM_CTRL 4 /* PM control and status register */ +#define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */ +#define PCI_PM_CTRL_NO_SOFT_RESET 0x0008 /* No reset for D3hot->D0 */ +#define PCI_PM_CTRL_PME_ENABLE 0x0100 /* PME pin enable */ +#define PCI_PM_CTRL_DATA_SEL_MASK 0x1e00 /* Data select (??) */ +#define PCI_PM_CTRL_DATA_SCALE_MASK 0x6000 /* Data scale (??) */ +#define PCI_PM_CTRL_PME_STATUS 0x8000 /* PME pin status */ +#define PCI_PM_PPB_EXTENSIONS 6 /* PPB support extensions (??) */ +#define PCI_PM_PPB_B2_B3 0x40 /* Stop clock when in D3hot (??) */ +#define PCI_PM_BPCC_ENABLE 0x80 /* Bus power/clock control enable (??) */ +#define PCI_PM_DATA_REGISTER 7 /* (??) */ +#define PCI_PM_SIZEOF 8 + +/* AGP registers */ + +#define PCI_AGP_VERSION 2 /* BCD version number */ +#define PCI_AGP_RFU 3 /* Rest of capability flags */ +#define PCI_AGP_STATUS 4 /* Status register */ +#define PCI_AGP_STATUS_RQ_MASK 0xff000000 /* Maximum number of requests - 1 */ +#define PCI_AGP_STATUS_SBA 0x0200 /* Sideband addressing supported */ +#define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing supported */ +#define PCI_AGP_STATUS_FW 0x0010 /* FW transfers supported */ +#define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */ +#define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */ +#define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */ +#define PCI_AGP_COMMAND 8 /* Control register */ +#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */ +#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */ +#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */ +#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */ +#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */ +#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */ +#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */ +#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */ +#define PCI_AGP_SIZEOF 12 + +/* Vital Product Data */ + +#define PCI_VPD_ADDR 2 /* Address to access (15 bits!) */ +#define PCI_VPD_ADDR_MASK 0x7fff /* Address mask */ +#define PCI_VPD_ADDR_F 0x8000 /* Write 0, 1 indicates completion */ +#define PCI_VPD_DATA 4 /* 32-bits of data returned here */ + +/* Slot Identification */ + +#define PCI_SID_ESR 2 /* Expansion Slot Register */ +#define PCI_SID_ESR_NSLOTS 0x1f /* Number of expansion slots available */ +#define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */ +#define PCI_SID_CHASSIS_NR 3 /* Chassis Number */ + +/* Message Signalled Interrupts registers */ + +#define PCI_MSI_FLAGS 2 /* Various flags */ +#define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit addresses allowed */ +#define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */ +#define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */ +#define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */ +#define PCI_MSI_FLAGS_MASKBIT 0x100 /* 64-bit mask bits allowed */ +#define PCI_MSI_RFU 3 /* Rest of capability flags */ +#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */ +#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */ +#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */ +#define PCI_MSI_MASK_32 12 /* Mask bits register for 32-bit devices */ +#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */ +#define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */ + +/* MSI-X registers */ +#define PCI_MSIX_FLAGS 2 +#define PCI_MSIX_FLAGS_QSIZE 0x7FF +#define PCI_MSIX_FLAGS_ENABLE (1 << 15) +#define PCI_MSIX_FLAGS_MASKALL (1 << 14) +#define PCI_MSIX_TABLE 4 +#define PCI_MSIX_PBA 8 +#define PCI_MSIX_FLAGS_BIRMASK (7 << 0) + +/* MSI-X entry's format */ +#define PCI_MSIX_ENTRY_SIZE 16 +#define PCI_MSIX_ENTRY_LOWER_ADDR 0 +#define PCI_MSIX_ENTRY_UPPER_ADDR 4 +#define PCI_MSIX_ENTRY_DATA 8 +#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 +#define PCI_MSIX_ENTRY_CTRL_MASKBIT 1 + +/* CompactPCI Hotswap Register */ + +#define PCI_CHSWP_CSR 2 /* Control and Status Register */ +#define PCI_CHSWP_DHA 0x01 /* Device Hiding Arm */ +#define PCI_CHSWP_EIM 0x02 /* ENUM# Signal Mask */ +#define PCI_CHSWP_PIE 0x04 /* Pending Insert or Extract */ +#define PCI_CHSWP_LOO 0x08 /* LED On / Off */ +#define PCI_CHSWP_PI 0x30 /* Programming Interface */ +#define PCI_CHSWP_EXT 0x40 /* ENUM# status - extraction */ +#define PCI_CHSWP_INS 0x80 /* ENUM# status - insertion */ + +/* PCI Advanced Feature registers */ + +#define PCI_AF_LENGTH 2 +#define PCI_AF_CAP 3 +#define PCI_AF_CAP_TP 0x01 +#define PCI_AF_CAP_FLR 0x02 +#define PCI_AF_CTRL 4 +#define PCI_AF_CTRL_FLR 0x01 +#define PCI_AF_STATUS 5 +#define PCI_AF_STATUS_TP 0x01 + +/* PCI-X registers */ + +#define PCI_X_CMD 2 /* Modes & Features */ +#define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */ +#define PCI_X_CMD_ERO 0x0002 /* Enable Relaxed Ordering */ +#define PCI_X_CMD_READ_512 0x0000 /* 512 byte maximum read byte count */ +#define PCI_X_CMD_READ_1K 0x0004 /* 1Kbyte maximum read byte count */ +#define PCI_X_CMD_READ_2K 0x0008 /* 2Kbyte maximum read byte count */ +#define PCI_X_CMD_READ_4K 0x000c /* 4Kbyte maximum read byte count */ +#define PCI_X_CMD_MAX_READ 0x000c /* Max Memory Read Byte Count */ + /* Max # of outstanding split transactions */ +#define PCI_X_CMD_SPLIT_1 0x0000 /* Max 1 */ +#define PCI_X_CMD_SPLIT_2 0x0010 /* Max 2 */ +#define PCI_X_CMD_SPLIT_3 0x0020 /* Max 3 */ +#define PCI_X_CMD_SPLIT_4 0x0030 /* Max 4 */ +#define PCI_X_CMD_SPLIT_8 0x0040 /* Max 8 */ +#define PCI_X_CMD_SPLIT_12 0x0050 /* Max 12 */ +#define PCI_X_CMD_SPLIT_16 0x0060 /* Max 16 */ +#define PCI_X_CMD_SPLIT_32 0x0070 /* Max 32 */ +#define PCI_X_CMD_MAX_SPLIT 0x0070 /* Max Outstanding Split Transactions */ +#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */ +#define PCI_X_STATUS 4 /* PCI-X capabilities */ +#define PCI_X_STATUS_DEVFN 0x000000ff /* A copy of devfn */ +#define PCI_X_STATUS_BUS 0x0000ff00 /* A copy of bus nr */ +#define PCI_X_STATUS_64BIT 0x00010000 /* 64-bit device */ +#define PCI_X_STATUS_133MHZ 0x00020000 /* 133 MHz capable */ +#define PCI_X_STATUS_SPL_DISC 0x00040000 /* Split Completion Discarded */ +#define PCI_X_STATUS_UNX_SPL 0x00080000 /* Unexpected Split Completion */ +#define PCI_X_STATUS_COMPLEX 0x00100000 /* Device Complexity */ +#define PCI_X_STATUS_MAX_READ 0x00600000 /* Designed Max Memory Read Count */ +#define PCI_X_STATUS_MAX_SPLIT 0x03800000 /* Designed Max Outstanding Split Transactions */ +#define PCI_X_STATUS_MAX_CUM 0x1c000000 /* Designed Max Cumulative Read Size */ +#define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd Split Completion Error Msg */ +#define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */ +#define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */ + +/* PCI Bridge Subsystem ID registers */ + +#define PCI_SSVID_VENDOR_ID 4 /* PCI-Bridge subsystem vendor id register */ +#define PCI_SSVID_DEVICE_ID 6 /* PCI-Bridge subsystem device id register */ + +/* PCI Express capability registers */ + +#define PCI_EXP_FLAGS 2 /* Capabilities register */ +#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */ +#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */ +#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */ +#define PCI_EXP_TYPE_LEG_END 0x1 /* Legacy Endpoint */ +#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ +#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */ +#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ +#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */ +#define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */ +#define PCI_EXP_TYPE_RC_EC 0x10 /* Root Complex Event Collector */ +#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ +#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ +#define PCI_EXP_DEVCAP 4 /* Device capabilities */ +#define PCI_EXP_DEVCAP_PAYLOAD 0x07 /* Max_Payload_Size */ +#define PCI_EXP_DEVCAP_PHANTOM 0x18 /* Phantom functions */ +#define PCI_EXP_DEVCAP_EXT_TAG 0x20 /* Extended tags */ +#define PCI_EXP_DEVCAP_L0S 0x1c0 /* L0s Acceptable Latency */ +#define PCI_EXP_DEVCAP_L1 0xe00 /* L1 Acceptable Latency */ +#define PCI_EXP_DEVCAP_ATN_BUT 0x1000 /* Attention Button Present */ +#define PCI_EXP_DEVCAP_ATN_IND 0x2000 /* Attention Indicator Present */ +#define PCI_EXP_DEVCAP_PWR_IND 0x4000 /* Power Indicator Present */ +#define PCI_EXP_DEVCAP_RBER 0x8000 /* Role-Based Error Reporting */ +#define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */ +#define PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */ +#define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */ +#define PCI_EXP_DEVCTL 8 /* Device Control */ +#define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */ +#define PCI_EXP_DEVCTL_NFERE 0x0002 /* Non-Fatal Error Reporting Enable */ +#define PCI_EXP_DEVCTL_FERE 0x0004 /* Fatal Error Reporting Enable */ +#define PCI_EXP_DEVCTL_URRE 0x0008 /* Unsupported Request Reporting En. */ +#define PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */ +#define PCI_EXP_DEVCTL_PAYLOAD 0x00e0 /* Max_Payload_Size */ +#define PCI_EXP_DEVCTL_EXT_TAG 0x0100 /* Extended Tag Field Enable */ +#define PCI_EXP_DEVCTL_PHANTOM 0x0200 /* Phantom Functions Enable */ +#define PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */ +#define PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800 /* Enable No Snoop */ +#define PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */ +#define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */ +#define PCI_EXP_DEVSTA 10 /* Device Status */ +#define PCI_EXP_DEVSTA_CED 0x01 /* Correctable Error Detected */ +#define PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal Error Detected */ +#define PCI_EXP_DEVSTA_FED 0x04 /* Fatal Error Detected */ +#define PCI_EXP_DEVSTA_URD 0x08 /* Unsupported Request Detected */ +#define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */ +#define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */ +#define PCI_EXP_LNKCAP 12 /* Link Capabilities */ +#define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */ +#define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */ +#define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */ +#define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */ +#define PCI_EXP_LNKCAP_L1EL 0x00038000 /* L1 Exit Latency */ +#define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* L1 Clock Power Management */ +#define PCI_EXP_LNKCAP_SDERC 0x00080000 /* Surprise Down Error Reporting Capable */ +#define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */ +#define PCI_EXP_LNKCAP_LBNC 0x00200000 /* Link Bandwidth Notification Capability */ +#define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */ +#define PCI_EXP_LNKCTL 16 /* Link Control */ +#define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */ +#define PCI_EXP_LNKCTL_RCB 0x0008 /* Read Completion Boundary */ +#define PCI_EXP_LNKCTL_LD 0x0010 /* Link Disable */ +#define PCI_EXP_LNKCTL_RL 0x0020 /* Retrain Link */ +#define PCI_EXP_LNKCTL_CCC 0x0040 /* Common Clock Configuration */ +#define PCI_EXP_LNKCTL_ES 0x0080 /* Extended Synch */ +#define PCI_EXP_LNKCTL_CLKREQ_EN 0x100 /* Enable clkreq */ +#define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware Autonomous Width Disable */ +#define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link Bandwidth Management Interrupt Enable */ +#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Lnk Autonomous Bandwidth Interrupt Enable */ +#define PCI_EXP_LNKSTA 18 /* Link Status */ +#define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */ +#define PCI_EXP_LNKSTA_CLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */ +#define PCI_EXP_LNKSTA_CLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */ +#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Nogotiated Link Width */ +#define PCI_EXP_LNKSTA_NLW_SHIFT 4 /* start of NLW mask in link status */ +#define PCI_EXP_LNKSTA_LT 0x0800 /* Link Training */ +#define PCI_EXP_LNKSTA_SLC 0x1000 /* Slot Clock Configuration */ +#define PCI_EXP_LNKSTA_DLLLA 0x2000 /* Data Link Layer Link Active */ +#define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */ +#define PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */ +#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ +#define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention Button Present */ +#define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power Controller Present */ +#define PCI_EXP_SLTCAP_MRLSP 0x00000004 /* MRL Sensor Present */ +#define PCI_EXP_SLTCAP_AIP 0x00000008 /* Attention Indicator Present */ +#define PCI_EXP_SLTCAP_PIP 0x00000010 /* Power Indicator Present */ +#define PCI_EXP_SLTCAP_HPS 0x00000020 /* Hot-Plug Surprise */ +#define PCI_EXP_SLTCAP_HPC 0x00000040 /* Hot-Plug Capable */ +#define PCI_EXP_SLTCAP_SPLV 0x00007f80 /* Slot Power Limit Value */ +#define PCI_EXP_SLTCAP_SPLS 0x00018000 /* Slot Power Limit Scale */ +#define PCI_EXP_SLTCAP_EIP 0x00020000 /* Electromechanical Interlock Present */ +#define PCI_EXP_SLTCAP_NCCS 0x00040000 /* No Command Completed Support */ +#define PCI_EXP_SLTCAP_PSN 0xfff80000 /* Physical Slot Number */ +#define PCI_EXP_SLTCTL 24 /* Slot Control */ +#define PCI_EXP_SLTCTL_ABPE 0x0001 /* Attention Button Pressed Enable */ +#define PCI_EXP_SLTCTL_PFDE 0x0002 /* Power Fault Detected Enable */ +#define PCI_EXP_SLTCTL_MRLSCE 0x0004 /* MRL Sensor Changed Enable */ +#define PCI_EXP_SLTCTL_PDCE 0x0008 /* Presence Detect Changed Enable */ +#define PCI_EXP_SLTCTL_CCIE 0x0010 /* Command Completed Interrupt Enable */ +#define PCI_EXP_SLTCTL_HPIE 0x0020 /* Hot-Plug Interrupt Enable */ +#define PCI_EXP_SLTCTL_AIC 0x00c0 /* Attention Indicator Control */ +#define PCI_EXP_SLTCTL_PIC 0x0300 /* Power Indicator Control */ +#define PCI_EXP_SLTCTL_PCC 0x0400 /* Power Controller Control */ +#define PCI_EXP_SLTCTL_EIC 0x0800 /* Electromechanical Interlock Control */ +#define PCI_EXP_SLTCTL_DLLSCE 0x1000 /* Data Link Layer State Changed Enable */ +#define PCI_EXP_SLTSTA 26 /* Slot Status */ +#define PCI_EXP_SLTSTA_ABP 0x0001 /* Attention Button Pressed */ +#define PCI_EXP_SLTSTA_PFD 0x0002 /* Power Fault Detected */ +#define PCI_EXP_SLTSTA_MRLSC 0x0004 /* MRL Sensor Changed */ +#define PCI_EXP_SLTSTA_PDC 0x0008 /* Presence Detect Changed */ +#define PCI_EXP_SLTSTA_CC 0x0010 /* Command Completed */ +#define PCI_EXP_SLTSTA_MRLSS 0x0020 /* MRL Sensor State */ +#define PCI_EXP_SLTSTA_PDS 0x0040 /* Presence Detect State */ +#define PCI_EXP_SLTSTA_EIS 0x0080 /* Electromechanical Interlock Status */ +#define PCI_EXP_SLTSTA_DLLSC 0x0100 /* Data Link Layer State Changed */ +#define PCI_EXP_RTCTL 28 /* Root Control */ +#define PCI_EXP_RTCTL_SECEE 0x01 /* System Error on Correctable Error */ +#define PCI_EXP_RTCTL_SENFEE 0x02 /* System Error on Non-Fatal Error */ +#define PCI_EXP_RTCTL_SEFEE 0x04 /* System Error on Fatal Error */ +#define PCI_EXP_RTCTL_PMEIE 0x08 /* PME Interrupt Enable */ +#define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software Visibility Enable */ +#define PCI_EXP_RTCAP 30 /* Root Capabilities */ +#define PCI_EXP_RTSTA 32 /* Root Status */ +#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */ +#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */ +#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ +#define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */ +#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ +#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */ +#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ +#define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */ + +/* Extended Capabilities (PCI-X 2.0 and Express) */ +#define PCI_EXT_CAP_ID(header) (header & 0x0000ffff) +#define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf) +#define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc) + +#define PCI_EXT_CAP_ID_ERR 1 +#define PCI_EXT_CAP_ID_VC 2 +#define PCI_EXT_CAP_ID_DSN 3 +#define PCI_EXT_CAP_ID_PWR 4 +#define PCI_EXT_CAP_ID_VNDR 11 +#define PCI_EXT_CAP_ID_ACS 13 +#define PCI_EXT_CAP_ID_ARI 14 +#define PCI_EXT_CAP_ID_ATS 15 +#define PCI_EXT_CAP_ID_SRIOV 16 + +/* Advanced Error Reporting */ +#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */ +#define PCI_ERR_UNC_TRAIN 0x00000001 /* Training */ +#define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */ +#define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */ +#define PCI_ERR_UNC_FCP 0x00002000 /* Flow Control Protocol */ +#define PCI_ERR_UNC_COMP_TIME 0x00004000 /* Completion Timeout */ +#define PCI_ERR_UNC_COMP_ABORT 0x00008000 /* Completer Abort */ +#define PCI_ERR_UNC_UNX_COMP 0x00010000 /* Unexpected Completion */ +#define PCI_ERR_UNC_RX_OVER 0x00020000 /* Receiver Overflow */ +#define PCI_ERR_UNC_MALF_TLP 0x00040000 /* Malformed TLP */ +#define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error Status */ +#define PCI_ERR_UNC_UNSUP 0x00100000 /* Unsupported Request */ +#define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */ + /* Same bits as above */ +#define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */ + /* Same bits as above */ +#define PCI_ERR_COR_STATUS 16 /* Correctable Error Status */ +#define PCI_ERR_COR_RCVR 0x00000001 /* Receiver Error Status */ +#define PCI_ERR_COR_BAD_TLP 0x00000040 /* Bad TLP Status */ +#define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */ +#define PCI_ERR_COR_REP_ROLL 0x00000100 /* REPLAY_NUM Rollover */ +#define PCI_ERR_COR_REP_TIMER 0x00001000 /* Replay Timer Timeout */ +#define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */ + /* Same bits as above */ +#define PCI_ERR_CAP 24 /* Advanced Error Capabilities */ +#define PCI_ERR_CAP_FEP(x) ((x) & 31) /* First Error Pointer */ +#define PCI_ERR_CAP_ECRC_GENC 0x00000020 /* ECRC Generation Capable */ +#define PCI_ERR_CAP_ECRC_GENE 0x00000040 /* ECRC Generation Enable */ +#define PCI_ERR_CAP_ECRC_CHKC 0x00000080 /* ECRC Check Capable */ +#define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */ +#define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */ +#define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */ +/* Correctable Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_COR_EN 0x00000001 +/* Non-fatal Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002 +/* Fatal Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004 +#define PCI_ERR_ROOT_STATUS 48 +#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */ +/* Multi ERR_COR Received */ +#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002 +/* ERR_FATAL/NONFATAL Recevied */ +#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004 +/* Multi ERR_FATAL/NONFATAL Recevied */ +#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008 +#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First Fatal */ +#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */ +#define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */ +#define PCI_ERR_ROOT_ERR_SRC 52 /* Error Source Identification */ + +/* Virtual Channel */ +#define PCI_VC_PORT_REG1 4 +#define PCI_VC_PORT_REG2 8 +#define PCI_VC_PORT_CTRL 12 +#define PCI_VC_PORT_STATUS 14 +#define PCI_VC_RES_CAP 16 +#define PCI_VC_RES_CTRL 20 +#define PCI_VC_RES_STATUS 26 + +/* Power Budgeting */ +#define PCI_PWR_DSR 4 /* Data Select Register */ +#define PCI_PWR_DATA 8 /* Data Register */ +#define PCI_PWR_DATA_BASE(x) ((x) & 0xff) /* Base Power */ +#define PCI_PWR_DATA_SCALE(x) (((x) >> 8) & 3) /* Data Scale */ +#define PCI_PWR_DATA_PM_SUB(x) (((x) >> 10) & 7) /* PM Sub State */ +#define PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */ +#define PCI_PWR_DATA_TYPE(x) (((x) >> 15) & 7) /* Type */ +#define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */ +#define PCI_PWR_CAP 12 /* Capability */ +#define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */ + +/* + * Hypertransport sub capability types + * + * Unfortunately there are both 3 bit and 5 bit capability types defined + * in the HT spec, catering for that is a little messy. You probably don't + * want to use these directly, just use pci_find_ht_capability() and it + * will do the right thing for you. + */ +#define HT_3BIT_CAP_MASK 0xE0 +#define HT_CAPTYPE_SLAVE 0x00 /* Slave/Primary link configuration */ +#define HT_CAPTYPE_HOST 0x20 /* Host/Secondary link configuration */ + +#define HT_5BIT_CAP_MASK 0xF8 +#define HT_CAPTYPE_IRQ 0x80 /* IRQ Configuration */ +#define HT_CAPTYPE_REMAPPING_40 0xA0 /* 40 bit address remapping */ +#define HT_CAPTYPE_REMAPPING_64 0xA2 /* 64 bit address remapping */ +#define HT_CAPTYPE_UNITID_CLUMP 0x90 /* Unit ID clumping */ +#define HT_CAPTYPE_EXTCONF 0x98 /* Extended Configuration Space Access */ +#define HT_CAPTYPE_MSI_MAPPING 0xA8 /* MSI Mapping Capability */ +#define HT_MSI_FLAGS 0x02 /* Offset to flags */ +#define HT_MSI_FLAGS_ENABLE 0x1 /* Mapping enable */ +#define HT_MSI_FLAGS_FIXED 0x2 /* Fixed mapping only */ +#define HT_MSI_FIXED_ADDR 0x00000000FEE00000ULL /* Fixed addr */ +#define HT_MSI_ADDR_LO 0x04 /* Offset to low addr bits */ +#define HT_MSI_ADDR_LO_MASK 0xFFF00000 /* Low address bit mask */ +#define HT_MSI_ADDR_HI 0x08 /* Offset to high addr bits */ +#define HT_CAPTYPE_DIRECT_ROUTE 0xB0 /* Direct routing configuration */ +#define HT_CAPTYPE_VCSET 0xB8 /* Virtual Channel configuration */ +#define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */ +#define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 hypertransport configuration */ +#define HT_CAPTYPE_PM 0xE0 /* Hypertransport powermanagement configuration */ + +/* Alternative Routing-ID Interpretation */ +#define PCI_ARI_CAP 0x04 /* ARI Capability Register */ +#define PCI_ARI_CAP_MFVC 0x0001 /* MFVC Function Groups Capability */ +#define PCI_ARI_CAP_ACS 0x0002 /* ACS Function Groups Capability */ +#define PCI_ARI_CAP_NFN(x) (((x) >> 8) & 0xff) /* Next Function Number */ +#define PCI_ARI_CTRL 0x06 /* ARI Control Register */ +#define PCI_ARI_CTRL_MFVC 0x0001 /* MFVC Function Groups Enable */ +#define PCI_ARI_CTRL_ACS 0x0002 /* ACS Function Groups Enable */ +#define PCI_ARI_CTRL_FG(x) (((x) >> 4) & 7) /* Function Group */ + +/* Address Translation Service */ +#define PCI_ATS_CAP 0x04 /* ATS Capability Register */ +#define PCI_ATS_CAP_QDEP(x) ((x) & 0x1f) /* Invalidate Queue Depth */ +#define PCI_ATS_MAX_QDEP 32 /* Max Invalidate Queue Depth */ +#define PCI_ATS_CTRL 0x06 /* ATS Control Register */ +#define PCI_ATS_CTRL_ENABLE 0x8000 /* ATS Enable */ +#define PCI_ATS_CTRL_STU(x) ((x) & 0x1f) /* Smallest Translation Unit */ +#define PCI_ATS_MIN_STU 12 /* shift of minimum STU block */ + +/* Single Root I/O Virtualization */ +#define PCI_SRIOV_CAP 0x04 /* SR-IOV Capabilities */ +#define PCI_SRIOV_CAP_VFM 0x01 /* VF Migration Capable */ +#define PCI_SRIOV_CAP_INTR(x) ((x) >> 21) /* Interrupt Message Number */ +#define PCI_SRIOV_CTRL 0x08 /* SR-IOV Control */ +#define PCI_SRIOV_CTRL_VFE 0x01 /* VF Enable */ +#define PCI_SRIOV_CTRL_VFM 0x02 /* VF Migration Enable */ +#define PCI_SRIOV_CTRL_INTR 0x04 /* VF Migration Interrupt Enable */ +#define PCI_SRIOV_CTRL_MSE 0x08 /* VF Memory Space Enable */ +#define PCI_SRIOV_CTRL_ARI 0x10 /* ARI Capable Hierarchy */ +#define PCI_SRIOV_STATUS 0x0a /* SR-IOV Status */ +#define PCI_SRIOV_STATUS_VFM 0x01 /* VF Migration Status */ +#define PCI_SRIOV_INITIAL_VF 0x0c /* Initial VFs */ +#define PCI_SRIOV_TOTAL_VF 0x0e /* Total VFs */ +#define PCI_SRIOV_NUM_VF 0x10 /* Number of VFs */ +#define PCI_SRIOV_FUNC_LINK 0x12 /* Function Dependency Link */ +#define PCI_SRIOV_VF_OFFSET 0x14 /* First VF Offset */ +#define PCI_SRIOV_VF_STRIDE 0x16 /* Following VF Stride */ +#define PCI_SRIOV_VF_DID 0x1a /* VF Device ID */ +#define PCI_SRIOV_SUP_PGSIZE 0x1c /* Supported Page Sizes */ +#define PCI_SRIOV_SYS_PGSIZE 0x20 /* System Page Size */ +#define PCI_SRIOV_BAR 0x24 /* VF BAR0 */ +#define PCI_SRIOV_NUM_BARS 6 /* Number of VF BARs */ +#define PCI_SRIOV_VFM 0x3c /* VF Migration State Array Offset*/ +#define PCI_SRIOV_VFM_BIR(x) ((x) & 7) /* State BIR */ +#define PCI_SRIOV_VFM_OFFSET(x) ((x) & ~7) /* State Offset */ +#define PCI_SRIOV_VFM_UA 0x0 /* Inactive.Unavailable */ +#define PCI_SRIOV_VFM_MI 0x1 /* Dormant.MigrateIn */ +#define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut */ +#define PCI_SRIOV_VFM_AV 0x3 /* Active.Available */ + +/* Access Control Service */ +#define PCI_ACS_CAP 0x04 /* ACS Capability Register */ +#define PCI_ACS_SV 0x01 /* Source Validation */ +#define PCI_ACS_TB 0x02 /* Translation Blocking */ +#define PCI_ACS_RR 0x04 /* P2P Request Redirect */ +#define PCI_ACS_CR 0x08 /* P2P Completion Redirect */ +#define PCI_ACS_UF 0x10 /* Upstream Forwarding */ +#define PCI_ACS_EC 0x20 /* P2P Egress Control */ +#define PCI_ACS_DT 0x40 /* Direct Translated P2P */ +#define PCI_ACS_CTRL 0x06 /* ACS Control Register */ +#define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress Control Vector */ + +#endif /* LINUX_PCI_REGS_H */ -- 1.7.5.4 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox