* [PATCH] ARM linux: support Linux images with CONFIG_AUTO_ZRELADDR
2011-08-23 15:16 [PATCH] support Arm Linux images with CONFIG_AUTO_ZRELADDR Sascha Hauer
@ 2011-08-23 15:16 ` Sascha Hauer
0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2011-08-23 15:16 UTC (permalink / raw)
To: barebox
These images have to be located in the first 128MB of SDRAM, so
use the following strategy:
- first try to map the image. If the pointer is within the first
128MB of sdram everything is fine.
- if we can't map the image, check for SDRAM being smaller than
128MB we can use malloc for allocating space for the image.
- As a last fallback we simply put the image to 8MB into SDRAM.
This is not very clean. We try our best by checking that we
won't overwrite the malloc space.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/lib/bootz.c | 59 +++++++++++++++++++++++++++++++++++++------------
1 files changed, 44 insertions(+), 15 deletions(-)
diff --git a/arch/arm/lib/bootz.c b/arch/arm/lib/bootz.c
index cd8f495..13bed25 100644
--- a/arch/arm/lib/bootz.c
+++ b/arch/arm/lib/bootz.c
@@ -4,9 +4,11 @@
#include <fcntl.h>
#include <errno.h>
#include <malloc.h>
+#include <sizes.h>
#include <asm/byteorder.h>
#include <asm/armlinux.h>
#include <asm/system.h>
+#include <asm-generic/memory_layout.h>
struct zimage_header {
u32 unused[9];
@@ -20,9 +22,11 @@ struct zimage_header {
static int do_bootz(struct command *cmdtp, int argc, char *argv[])
{
int fd, ret, swap = 0;
- struct zimage_header header;
+ struct zimage_header __header, *header;
void *zimage;
u32 end;
+ int usemap = 0;
+ struct arm_memory *mem = list_first_entry(&memory_list, struct arm_memory, list);
if (argc != 2) {
barebox_cmd_usage(cmdtp);
@@ -35,13 +39,27 @@ static int do_bootz(struct command *cmdtp, int argc, char *argv[])
return 1;
}
- ret = read(fd, &header, sizeof(header));
- if (ret < sizeof(header)) {
- printf("could not read %s\n", argv[1]);
- goto err_out;
+ /*
+ * We can save the memcpy of the zImage if it already is in
+ * the first 128MB of SDRAM.
+ */
+ zimage = memmap(fd, PROT_READ);
+ if (zimage && (unsigned long)zimage >= mem->start &&
+ (unsigned long)zimage < mem->start + SZ_128M) {
+ usemap = 1;
+ header = zimage;
+ }
+
+ if (!usemap) {
+ header = &__header;
+ ret = read(fd, header, sizeof(header));
+ if (ret < sizeof(*header)) {
+ printf("could not read %s\n", argv[1]);
+ goto err_out;
+ }
}
- switch (header.magic) {
+ switch (header->magic) {
#ifdef CONFIG_BOOT_ENDIANNESS_SWITCH
case swab32(ZIMAGE_MAGIC):
swap = 1;
@@ -50,22 +68,33 @@ static int do_bootz(struct command *cmdtp, int argc, char *argv[])
case ZIMAGE_MAGIC:
break;
default:
- printf("invalid magic 0x%08x\n", header.magic);
+ printf("invalid magic 0x%08x\n", header->magic);
goto err_out;
}
- end = header.end;
+ end = header->end;
if (swap)
end = swab32(end);
- zimage = xmalloc(end);
- memcpy(zimage, &header, sizeof(header));
-
- ret = read(fd, zimage + sizeof(header), end - sizeof(header));
- if (ret < end - sizeof(header)) {
- printf("could not read %s\n", argv[1]);
- goto err_out1;
+ if (!usemap) {
+ if (mem->size <= SZ_128M) {
+ zimage = xmalloc(end);
+ } else {
+ zimage = (void *)mem->start + SZ_8M;
+ if (mem->start + SZ_8M + end >= MALLOC_BASE) {
+ printf("won't overwrite malloc space with image\n");
+ goto err_out1;
+ }
+ }
+
+ memcpy(zimage, &header, sizeof(header));
+
+ ret = read(fd, zimage + sizeof(header), end - sizeof(header));
+ if (ret < end - sizeof(header)) {
+ printf("could not read %s\n", argv[1]);
+ goto err_out1;
+ }
}
if (swap) {
--
1.7.5.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread