mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 04/12] at91/boards: switch to software ecc as in linux kernel
Date: Mon, 19 Sep 2011 14:15:41 +0200	[thread overview]
Message-ID: <1316434549-15243-4-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1316434549-15243-1-git-send-email-plagnioj@jcrosoft.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/at91sam9260ek/init.c     |    2 +-
 arch/arm/boards/at91sam9263ek/init.c     |    2 +-
 arch/arm/boards/pm9263/init.c            |    2 +-
 arch/arm/mach-at91/at91sam9g45_devices.c |    2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boards/at91sam9260ek/init.c b/arch/arm/boards/at91sam9260ek/init.c
index 861e898..e4b98bf 100644
--- a/arch/arm/boards/at91sam9260ek/init.c
+++ b/arch/arm/boards/at91sam9260ek/init.c
@@ -64,7 +64,7 @@ static struct atmel_nand_data nand_pdata = {
 	.cle		= 22,
 /*	.det_pin	= ... not connected */
 	.ecc_base	= (void __iomem *)(AT91_BASE_SYS + AT91_ECC),
-	.ecc_mode	= NAND_ECC_HW,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 #if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
diff --git a/arch/arm/boards/at91sam9263ek/init.c b/arch/arm/boards/at91sam9263ek/init.c
index 46f3a7e..9e0981f 100644
--- a/arch/arm/boards/at91sam9263ek/init.c
+++ b/arch/arm/boards/at91sam9263ek/init.c
@@ -45,7 +45,7 @@ static struct atmel_nand_data nand_pdata = {
 	.cle		= 22,
 /*	.det_pin	= ... not connected */
 	.ecc_base	= (void __iomem *)(AT91_BASE_SYS + AT91_ECC0),
-	.ecc_mode	= NAND_ECC_HW,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
 #if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
diff --git a/arch/arm/boards/pm9263/init.c b/arch/arm/boards/pm9263/init.c
index aeca4e7..a1fe0cd 100644
--- a/arch/arm/boards/pm9263/init.c
+++ b/arch/arm/boards/pm9263/init.c
@@ -44,7 +44,7 @@ static struct atmel_nand_data nand_pdata = {
 	.cle		= 22,
 /*	.det_pin	= ... not connected */
 	.ecc_base	= (void __iomem *)(AT91_BASE_SYS + AT91_ECC0),
-	.ecc_mode	= NAND_ECC_HW,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.rdy_pin	= AT91_PIN_PB30,
 	.enable_pin	= AT91_PIN_PD15,
 #if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index f311b62..e18682b 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -71,7 +71,7 @@ void at91_add_device_nand(struct atmel_nand_data *data)
 		return;
 
 	data->ecc_base = (void __iomem *)(AT91_BASE_SYS + AT91_ECC);
-	data->ecc_mode = NAND_ECC_HW;
+	data->ecc_mode	= NAND_ECC_SOFT;
 
 	csa = at91_sys_read(AT91_MATRIX_EBICSA);
 	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
-- 
1.7.5.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2011-09-19 12:38 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-09-19 12:15 [PATCH 01/12 v2] arm: export arch_number to env Jean-Christophe PLAGNIOL-VILLARD
2011-09-19 12:15 ` [PATCH 02/12] at91: fix cpu clock speed display Jean-Christophe PLAGNIOL-VILLARD
2011-09-19 12:15 ` [PATCH 03/12] at91: Fix uhpck clock rate in upll case Jean-Christophe PLAGNIOL-VILLARD
2011-09-19 12:15 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2011-09-19 12:15 ` [PATCH 05/12] resource: introduce add_generic_device_res to add multiple resource Jean-Christophe PLAGNIOL-VILLARD
2011-09-19 12:15 ` [PATCH 06/12] at91: nand switch ecc base to resource Jean-Christophe PLAGNIOL-VILLARD
2011-09-19 12:15 ` [PATCH 07/12] usb/core: make print dev like linux lsusb Jean-Christophe PLAGNIOL-VILLARD
2011-09-19 12:15 ` [PATCH 08/12] usb: honour timeout fields Jean-Christophe PLAGNIOL-VILLARD
2011-09-19 12:15 ` [PATCH 09/12] initial ohci support Jean-Christophe PLAGNIOL-VILLARD
2011-09-19 12:15 ` [PATCH 10/12] at91: add " Jean-Christophe PLAGNIOL-VILLARD
2011-09-19 13:05   ` Hubert Feurstein
2011-09-19 12:15 ` [PATCH 11/12] at91: add Calao USB-A960 and USB-A9G20 C01 & C11 board support Jean-Christophe PLAGNIOL-VILLARD
2011-09-19 12:15 ` [PATCH 12/12] at91: add Calao USB-A9263 Jean-Christophe PLAGNIOL-VILLARD
2011-09-20 19:13 ` [PATCH 01/12 v2] arm: export arch_number to env Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1316434549-15243-4-git-send-email-plagnioj@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox