From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by canuck.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1R8T1o-0001n1-Dn for barebox@lists.infradead.org; Tue, 27 Sep 2011 08:28:41 +0000 From: Sascha Hauer Date: Tue, 27 Sep 2011 10:28:29 +0200 Message-Id: <1317112109-23311-15-git-send-email-s.hauer@pengutronix.de> In-Reply-To: <1317112109-23311-1-git-send-email-s.hauer@pengutronix.de> References: <1317112109-23311-1-git-send-email-s.hauer@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 14/14] pcm030: cleanup config.h To: barebox@lists.infradead.org Remove several now unnecessary defines. Signed-off-by: Sascha Hauer --- arch/ppc/boards/pcm030/config.h | 66 +------------------------------------- 1 files changed, 2 insertions(+), 64 deletions(-) diff --git a/arch/ppc/boards/pcm030/config.h b/arch/ppc/boards/pcm030/config.h index a772ee6..e8064d2 100644 --- a/arch/ppc/boards/pcm030/config.h +++ b/arch/ppc/boards/pcm030/config.h @@ -29,80 +29,18 @@ #include -/* #define DEBUG */ - -/*------------------------------------------------------------------------------------------------------------------------------------------------------ -High Level Configuration Options -(easy to change) - ------------------------------------------------------------------------------------------------------------------------------------------------------*/ -#define CONFIG_MPC5200_DDR 1 /* (with DDR-SDRAM) */ #define CFG_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - -/*------------------------------------------------------------------------------------------------------------------------------------------------------ -Serial console configuration - ------------------------------------------------------------------------------------------------------------------------------------------------------*/ - -#if (TEXT_BASE == 0xFF000000) /* Boot low */ -#define CFG_LOWBOOT 1 -#endif -/* RAMBOOT will be defined automatically in memory section */ - -/*------------------------------------------------------------------------------------------------------------------------------------------------------ -IPB Bus clocking configuration. - ------------------------------------------------------------------------------------------------------------------------------------------------------*/ -#define CFG_IPBSPEED_133 /* define for 133MHz speed */ -#if defined(CFG_IPBSPEED_133) -/* - * PCI Bus clocking configuration - * - * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't - * been tested with a IPB Bus Clock of 66 MHz. - */ -#define CFG_PCISPEED_66 /* define for 66MHz speed */ -#else -#undef CFG_PCISPEED_66 /* for 33MHz speed */ -#endif -/* we only use CS-Boot */ -#define CFG_BOOTCS_START 0xFF000000 -#define CFG_BOOTCS_SIZE 0x01000000 - -#if CONFIG_MACH_PHYCORE_MPC5200B_TINY_REV == 1 -#define CFG_BOOTCS_CFG 0x0008FD00 -#else -#define CFG_BOOTCS_CFG 0x00083800 -#endif - -/*------------------------------------------------------------------------------------------------------------------------------------------------------ - Memory map - ------------------------------------------------------------------------------------------------------------------------------------------------------*/ -#define CFG_MBAR 0xF0000000 /* MBAR hast to be switched by other bootloader or debugger config */ -#define CFG_SDRAM_BASE 0x00000000 - -/* Use SRAM until RAM will be available */ -#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM -#define CFG_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ -#define CONFIG_EARLY_INITDATA_SIZE 0x100 - -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*------------------------------------------------------------------------------------------------------------------------------------------------------ - GPIO configuration - ------------------------------------------------------------------------------------------------------------------------------------------------------*/ #define CFG_GPS_PORT_CONFIG 0x00558c10 /* PSC6=UART, PSC3=UART ; Ether=100MBit with MD */ -/*------------------------------------------------------------------------------------------------------------------------------------------------------ - Various low-level settings - ------------------------------------------------------------------------------------------------------------------------------------------------------*/ #define CFG_HID0_INIT HID0_ICE | HID0_ICFI #define CFG_HID0_FINAL HID0_ICE #define CFG_CS_BURST 0x00000000 #define CFG_CS_DEADCYCLE 0x33333333 +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + #define OF_CPU "PowerPC,5200@0" #define OF_TBCLK CFG_MPC5XXX_CLKIN #define OF_SOC "soc5200@f0000000" -- 1.7.6.3 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox