mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Rosen Kolev <rosen.kolev@amk-drives.bg>
To: barebox@lists.infradead.org
Subject: [PATCH] Allow data-only i2c transfers
Date: Thu, 29 Sep 2011 11:57:02 +0300	[thread overview]
Message-ID: <1317286622-7477-1-git-send-email-rosen.kolev@amk-drives.bg> (raw)

Modified the i2c_imx driver to support data-only transfers, without
command byte.  This allows to construct more complex i2c transfers
and support non genuine devices like Atmel ATxx secure memory, where the
master reads data after a write command.

Signed-off-by: Rosen Kolev <rosen.kolev@amk-drives.bg>
---
 drivers/i2c/busses/i2c-imx.c |   52 ++++++++++++++++++++++-------------------
 include/i2c/i2c.h            |    1 +
 2 files changed, 29 insertions(+), 24 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 2d075f7..d928839 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -314,19 +314,21 @@ static int i2c_imx_write(struct i2c_adapter *adapter, struct i2c_msg *msgs)
 	void __iomem *base = i2c_imx->base;
 	int i, result;
 
-	dev_dbg(adapter->dev,
-		"<%s> write slave address: addr=0x%02x\n",
-		__func__, msgs->addr << 1);
+	if ( !(msgs->flags & I2C_M_DATA_ONLY) ) {
+		dev_dbg(adapter->dev,
+			"<%s> write slave address: addr=0x%02x\n",
+			__func__, msgs->addr << 1);
 
-	/* write slave address */
-	writeb(msgs->addr << 1, base + IMX_I2C_I2DR);
+		/* write slave address */
+		writeb(msgs->addr << 1, base + IMX_I2C_I2DR);
 
-	result = i2c_imx_trx_complete(adapter);
-	if (result)
-		return result;
-	result = i2c_imx_acked(adapter);
-	if (result)
-		return result;
+		result = i2c_imx_trx_complete(adapter);
+		if (result)
+			return result;
+		result = i2c_imx_acked(adapter);
+		if (result)
+			return result;
+	}
 
 	/* write data */
 	for (i = 0; i < msgs->len; i++) {
@@ -352,22 +354,24 @@ static int i2c_imx_read(struct i2c_adapter *adapter, struct i2c_msg *msgs)
 	int i, result;
 	unsigned int temp;
 
-	dev_dbg(adapter->dev,
-		"<%s> write slave address: addr=0x%02x\n",
-		__func__, (msgs->addr << 1) | 0x01);
-
 	/* clear IIF */
 	writeb(0x0, base + IMX_I2C_I2SR);
 
-	/* write slave address */
-	writeb((msgs->addr << 1) | 0x01, base + IMX_I2C_I2DR);
+	if ( !(msgs->flags & I2C_M_DATA_ONLY) ) {
+		dev_dbg(adapter->dev,
+			"<%s> write slave address: addr=0x%02x\n",
+			__func__, (msgs->addr << 1) | 0x01);
 
-	result = i2c_imx_trx_complete(adapter);
-	if (result)
-		return result;
-	result = i2c_imx_acked(adapter);
-	if (result)
-		return result;
+		/* write slave address */
+		writeb((msgs->addr << 1) | 0x01, base + IMX_I2C_I2DR);
+
+		result = i2c_imx_trx_complete(adapter);
+		if (result)
+			return result;
+		result = i2c_imx_acked(adapter);
+		if (result)
+			return result;
+	}
 
 	/* setup bus to read data */
 	temp = readb(base + IMX_I2C_I2CR);
@@ -428,7 +432,7 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
 
 	/* read/write data */
 	for (i = 0; i < num; i++) {
-		if (i) {
+		if (i && !(msgs[i].flags & I2C_M_DATA_ONLY)) {
 			temp = readb(base + IMX_I2C_I2CR);
 			temp |= I2CR_RSTA;
 			writeb(temp, base + IMX_I2C_I2CR);
diff --git a/include/i2c/i2c.h b/include/i2c/i2c.h
index 2507d68..ccbf518 100644
--- a/include/i2c/i2c.h
+++ b/include/i2c/i2c.h
@@ -30,6 +30,7 @@ struct i2c_platform_data {
 #define I2C_NAME_SIZE	20
 
 #define I2C_M_RD		0x0001	/* read data, from slave to master */
+#define I2C_M_DATA_ONLY		0x0002	/* transfer data bytes only */
 #define I2C_M_TEN               0x0010  /* this is a ten bit chip address */
 #define I2C_M_IGNORE_NAK        0x1000  /* if I2C_FUNC_PROTOCOL_MANGLING */
 
-- 
1.7.2.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2011-09-29  7:57 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-09-29  8:57 Rosen Kolev [this message]
2011-10-07 13:46 ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1317286622-7477-1-git-send-email-rosen.kolev@amk-drives.bg \
    --to=rosen.kolev@amk-drives.bg \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox