From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 02/10] mtd nand omap: factor out bch correct function
Date: Tue, 8 Nov 2011 14:01:45 +0100 [thread overview]
Message-ID: <1320757313-12568-3-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1320757313-12568-1-git-send-email-s.hauer@pengutronix.de>
We need the bch correct algorithm in the next patches, so
factor out a seperate function for this and also safe an
indention level.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/mtd/nand/nand_omap_gpmc.c | 114 ++++++++++++++++++++-----------------
1 files changed, 62 insertions(+), 52 deletions(-)
diff --git a/drivers/mtd/nand/nand_omap_gpmc.c b/drivers/mtd/nand/nand_omap_gpmc.c
index f1074bb..1b5bfaf 100644
--- a/drivers/mtd/nand/nand_omap_gpmc.c
+++ b/drivers/mtd/nand/nand_omap_gpmc.c
@@ -337,6 +337,66 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
return 0;
}
+static int omap_correct_bch(struct mtd_info *mtd, uint8_t *dat,
+ uint8_t *read_ecc, uint8_t *calc_ecc)
+{
+ struct nand_chip *nand = (struct nand_chip *)(mtd->priv);
+ struct gpmc_nand_info *oinfo = (struct gpmc_nand_info *)(nand->priv);
+ int i, j, eccsize, eccflag, count;
+ unsigned int err_loc[8];
+ int blocks = 0;
+ int select_4_8;
+
+ if (oinfo->ecc_mode == OMAP_ECC_BCH4_CODE_HW) {
+ eccsize = 7;
+ select_4_8 = 0;
+ } else {
+ eccsize = 13;
+ select_4_8 = 1;
+ }
+
+ if (nand->ecc.size == 2048)
+ blocks = 4;
+ else
+ blocks = 1;
+
+ omap_calculate_ecc(mtd, dat, calc_ecc);
+
+ for (i = 0; i < blocks; i++) {
+ /* check if any ecc error */
+ eccflag = 0;
+ for (j = 0; (j < eccsize) && (eccflag == 0); j++) {
+ if (calc_ecc[j] != 0)
+ eccflag = 1;
+ }
+
+ if (eccflag == 1) {
+ eccflag = 0;
+ for (j = 0; (j < eccsize) &&
+ (eccflag == 0); j++)
+ if (read_ecc[j] != 0xFF)
+ eccflag = 1;
+ }
+
+ count = 0;
+ if (eccflag == 1)
+ count = decode_bch(select_4_8, calc_ecc, err_loc);
+
+ for (j = 0; j < count; j++) {
+ if (err_loc[j] < 4096)
+ dat[err_loc[j] >> 3] ^=
+ 1 << (err_loc[j] & 7);
+ /* else, not interested to correct ecc */
+ }
+
+ calc_ecc = calc_ecc + eccsize;
+ read_ecc = read_ecc + eccsize;
+ dat += 512;
+ }
+
+ return 0;
+}
+
/**
* @brief Compares the ecc read from nand spare area with ECC
* registers values and corrects one bit error if it has occured
@@ -359,11 +419,6 @@ static int omap_correct_data(struct mtd_info *mtd, uint8_t *dat,
unsigned char bit;
struct nand_chip *nand = (struct nand_chip *)(mtd->priv);
struct gpmc_nand_info *oinfo = (struct gpmc_nand_info *)(nand->priv);
- int ecc_type = OMAP_ECC_BCH8_CODE_HW;
- int i, j, eccsize, eccflag, count;
- unsigned int err_loc[8];
- int blocks = 0;
- int select_4_8;
debug("mtd=%x dat=%x read_ecc=%x calc_ecc=%x", (unsigned int)mtd,
(unsigned int)dat, (unsigned int)read_ecc,
@@ -403,55 +458,10 @@ static int omap_correct_data(struct mtd_info *mtd, uint8_t *dat,
}
}
break;
+ case OMAP_ECC_BCH4_CODE_HW:
case OMAP_ECC_BCH8_CODE_HW:
case OMAP_ECC_BCH8_CODE_HW_ROMCODE:
- eccsize = 13;
- select_4_8 = 1;
- /* fall through */
- case OMAP_ECC_BCH4_CODE_HW:
-
- if (nand->ecc.size == 2048)
- blocks = 4;
- else
- blocks = 1;
-
- if (ecc_type == OMAP_ECC_BCH4_CODE_HW) {
- eccsize = 7;
- select_4_8 = 0;
- }
-
- omap_calculate_ecc(mtd, dat, calc_ecc);
- for (i = 0; i < blockCnt; i++) {
- /* check if any ecc error */
- eccflag = 0;
- for (j = 0; (j < eccsize) && (eccflag == 0); j++)
- if (calc_ecc[j] != 0)
- eccflag = 1;
-
- if (eccflag == 1) {
- eccflag = 0;
- for (j = 0; (j < eccsize) &&
- (eccflag == 0); j++)
- if (read_ecc[j] != 0xFF)
- eccflag = 1;
- }
-
- count = 0;
- if (eccflag == 1)
- count = decode_bch(select_4_8, calc_ecc, err_loc);
-
- for (j = 0; j < count; j++) {
- if (err_loc[j] < 4096)
- dat[err_loc[j] >> 3] ^=
- 1 << (err_loc[j] & 7);
- /* else, not interested to correct ecc */
- }
-
- calc_ecc = calc_ecc + eccsize;
- read_ecc = read_ecc + eccsize;
- dat += 512;
- }
- break;
+ return omap_correct_bch(mtd, dat, read_ecc, calc_ecc);
default:
return -EINVAL;
}
--
1.7.7
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2011-11-08 13:02 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-08 13:01 [PATCH] OMAP gpmc nand Sascha Hauer
2011-11-08 13:01 ` [PATCH 01/10] mtd nand omap: use blocknum calculation to where it's used Sascha Hauer
2011-11-08 13:01 ` Sascha Hauer [this message]
2011-11-08 13:01 ` [PATCH 03/10] mtd nand omap: factor out hamming correct function Sascha Hauer
2011-11-08 13:01 ` [PATCH 04/10] mtd nand omap: call ecc calculate function outside omap_correct_bch Sascha Hauer
2011-11-08 13:01 ` [PATCH 05/10] mtd nand omap: fail on bch decode failure Sascha Hauer
2011-11-08 13:01 ` [PATCH 06/10] mtd nand omap: use register defines for ecc registers Sascha Hauer
2011-11-08 13:01 ` [PATCH 07/10] mtd nand omap: make debugging output more useful Sascha Hauer
2011-11-08 13:01 ` [PATCH 08/10] mtd nand omap: factor out an internal __omap_calculate_ecc function Sascha Hauer
2011-11-08 13:01 ` [PATCH 09/10] mtd nand omap: add read function for the OMAP4 romcode ecc mode Sascha Hauer
2011-11-08 13:01 ` [PATCH 10/10] mtd nand omap: use NAND_OWN_BUFFERS option Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1320757313-12568-3-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox