From: Juergen Beisert <jbe@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 09/13] Use generic block layer to access the drives and do partition parsing
Date: Tue, 22 Nov 2011 09:29:23 +0100 [thread overview]
Message-ID: <1321950567-13261-10-git-send-email-jbe@pengutronix.de> (raw)
In-Reply-To: <1321950567-13261-1-git-send-email-jbe@pengutronix.de>
Change all relevant blockdevice users to the simplified interface.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
drivers/ata/Kconfig | 2 +
drivers/ata/disk_bios_drive.c | 97 +++++++++++++++++------------
drivers/mci/Kconfig | 1 -
drivers/mci/mci-core.c | 135 ++++++++++++++++++++++++-----------------
drivers/usb/storage/Kconfig | 1 +
drivers/usb/storage/usb.c | 124 ++++++++++++++++++++++----------------
drivers/usb/storage/usb.h | 8 +--
include/mci.h | 3 +-
8 files changed, 216 insertions(+), 155 deletions(-)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index f3b2939..a85958c 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -1,5 +1,7 @@
menuconfig DISK
select BLOCK
+ select PARTITION
+ select PARTITION_DISK
bool "Disk support "
help
Add support for disk like drives like harddisks, CDROMs, SD cards and
diff --git a/drivers/ata/disk_bios_drive.c b/drivers/ata/disk_bios_drive.c
index 6e2377c..28154dc 100644
--- a/drivers/ata/disk_bios_drive.c
+++ b/drivers/ata/disk_bios_drive.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2009 Juergen Beisert, Pengutronix
+ * Copyright (C) 2009...2011 Juergen Beisert, Pengutronix
*
* Mostly stolen from the GRUB2 project
* Copyright (C) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2008 Free Software Foundation, Inc.
@@ -43,15 +43,13 @@
* Note: This driver does only support LBA addressing. Currently no CHS!
*/
-#include <stdio.h>
-#include <linux/types.h>
+#include <common.h>
#include <init.h>
-#include <driver.h>
-#include <string.h>
-#include <xfuncs.h>
#include <asm/syslib.h>
-#include <ata.h>
#include <errno.h>
+#include <block.h>
+#include <disks.h>
+#include <malloc.h>
/**
* Sector count handled in one count
@@ -61,9 +59,6 @@
*/
#define SECTORS_AT_ONCE 64
-/** Size of one sector in bytes */
-#define SECTOR_SIZE 512
-
/** Command to read sectors from media */
#define BIOS_READ_CMD 0
@@ -89,10 +84,13 @@ struct DAPS
* Collection of data we need to know about the connected drive
*/
struct media_access {
+ struct block_device blk; /**< the main device */
int drive_no; /**< drive number used by the BIOS */
int is_cdrom; /**< drive is a CDROM e.g. no write support */
};
+#define to_media_access(x) container_of((x), struct media_access, blk)
+
/**
* Scratch memory for BIOS communication to handle data in chunks of 32 kiB
*
@@ -146,19 +144,23 @@ static int biosdisk_bios_call(struct media_access *media, int cmd, uint64_t sect
/**
* Read a chunk of sectors from media
- * @param dev our data we need to do the access
- * @param sector_start Sector's LBA number to start read from
- * @param sector_count Sectors to read
+ * @param blk All info about the block device we need
* @param buffer Buffer to read into
+ * @param block Sector's LBA number to start read from
+ * @param num_blocks Sector count to read
* @return 0 on success, anything else on failure
*
* This routine expects the buffer has the correct size to store all data!
+ *
+ * @note Due to 'block' is of type 'int' only small disks can be handled!
*/
-static int biosdisk_read(struct device_d *dev, uint64_t sector_start, unsigned sector_count, void *buffer)
+static int biosdisk_read(struct block_device *blk, void *buffer, int block,
+ int num_blocks)
{
int rc;
- struct ata_interface *intf = dev->platform_data;
- struct media_access *media = intf->priv;
+ uint64_t sector_start = block;
+ unsigned sector_count = num_blocks;
+ struct media_access *media = to_media_access(blk);
while (sector_count >= SECTORS_AT_ONCE) {
rc = biosdisk_bios_call(media, BIOS_READ_CMD, sector_start, SECTORS_AT_ONCE, scratch_buffer);
@@ -182,19 +184,23 @@ static int biosdisk_read(struct device_d *dev, uint64_t sector_start, unsigned s
/**
* Write a chunk of sectors to media
- * @param dev our data we need to do the access
- * @param sector_start Sector's LBA number to start write to
- * @param sector_count Sectors to write
+ * @param blk All info about the block device we need
* @param buffer Buffer to write from
+ * @param block Sector's LBA number to start write to
+ * @param num_blocks Sector count to write
* @return 0 on success, anything else on failure
*
* This routine expects the buffer has the correct size to read all data!
+ *
+ * @note Due to 'block' is of type 'int' only small disks can be handled!
*/
-static int biosdisk_write(struct device_d *dev, uint64_t sector_start, unsigned sector_count, const void *buffer)
+static int __maybe_unused biosdisk_write(struct block_device *blk,
+ const void *buffer, int block, int num_blocks)
{
int rc;
- struct ata_interface *intf = dev->platform_data;
- struct media_access *media = intf->priv;
+ uint64_t sector_start = block;
+ unsigned sector_count = num_blocks;
+ struct media_access *media = to_media_access(blk);
while (sector_count >= SECTORS_AT_ONCE) {
__builtin_memcpy(scratch_buffer, buffer, sizeof(scratch_buffer));
@@ -216,6 +222,13 @@ static int biosdisk_write(struct device_d *dev, uint64_t sector_start, unsigned
return rc;
}
+static struct block_device_ops bios_ata = {
+ .read = biosdisk_read,
+#ifdef CONFIG_BLOCK_WRITE
+ .write = biosdisk_write,
+#endif
+};
+
/**
* Probe for connected drives and register them
*
@@ -228,8 +241,6 @@ static int biosdisk_probe(struct device_d *dev)
{
int drive, rc;
struct media_access media, *m;
- struct device_d *drive_dev;
- struct ata_interface *p;
for (drive = 0x80; drive < 0x90; drive++) {
media.drive_no = drive;
@@ -240,27 +251,31 @@ static int biosdisk_probe(struct device_d *dev)
printf("BIOSdrive %d seems valid. Registering...\n", media.drive_no);
- drive_dev = xzalloc(sizeof(struct device_d) + sizeof(struct media_access) + sizeof(struct ata_interface));
- if (drive_dev == NULL) {
- dev_err(dev, "Out of memory\n");
- return -1;
- }
- m = (struct media_access*)&drive_dev[1];
- p = (struct ata_interface*)&m[1];
+ m = xzalloc(sizeof(struct media_access));
- m->drive_no = drive;
- m->is_cdrom = 0;
+ m->blk.dev = dev;
+ m->blk.ops = &bios_ata;
+ m->is_cdrom = 0; /* don't know yet */
+ m->blk.num_blocks = 0; /* we don't know the size of this disk! */
- p->write = biosdisk_write;
- p->read = biosdisk_read;
- p->priv = m;
+ rc = cdev_find_free_number("disk");
+ if (rc == -1)
+ pr_err("Cannot find a free number for the disk node\n");
+ m->blk.cdev.name = asprintf("disk%d", rc);
+ m->blk.blockbits = SECTOR_SHIFT;
- strcpy(drive_dev->name, "biosdisk");
- drive_dev->id = drive - 0x80;
- drive_dev->resource[0].start = 0;
- drive_dev->platform_data = p;
+ rc = blockdevice_register(&m->blk);
+ if (rc != 0) {
+ dev_err(dev, "Cannot register BIOSdrive %d\n",
+ media.drive_no);
+ free(m);
+ return rc;
+ }
- register_device(drive_dev);
+ /* create partitions on demand */
+ rc = parse_partition_table(&m->blk);
+ if (rc != 0)
+ dev_warn(dev, "No partition table found\n");
}
return 0;
diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig
index d24e606..6ec4527 100644
--- a/drivers/mci/Kconfig
+++ b/drivers/mci/Kconfig
@@ -1,7 +1,6 @@
menuconfig MCI
bool "MCI drivers "
select DISK
- select DISK_DRIVE
help
Add support for MCI drivers, used to handle MMC and SD cards
diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
index 138efcc..3347456 100644
--- a/drivers/mci/mci-core.c
+++ b/drivers/mci/mci-core.c
@@ -36,7 +36,8 @@
#include <errno.h>
#include <asm-generic/div64.h>
#include <asm/byteorder.h>
-#include <ata.h>
+#include <block.h>
+#include <disks.h>
#define MAX_BUFFER_NUMBER 0xffffffff
@@ -104,10 +105,10 @@ static void *sector_buf;
* @param mci_dev MCI instance
* @param src Where to read from to write to the card
* @param blocknum Block number to write
+ * @param blocks Block count to write
* @return Transaction status (0 on success)
*/
-#ifdef CONFIG_MCI_WRITE
-static int mci_block_write(struct device_d *mci_dev, const void *src, unsigned blocknum,
+static int mci_block_write(struct device_d *mci_dev, const void *src, int blocknum,
int blocks)
{
struct mci *mci = GET_MCI_DATA(mci_dev);
@@ -154,7 +155,6 @@ static int mci_block_write(struct device_d *mci_dev, const void *src, unsigned b
return ret;
}
-#endif
/**
* Read one block of data from the card
@@ -163,7 +163,7 @@ static int mci_block_write(struct device_d *mci_dev, const void *src, unsigned b
* @param blocknum Block number to read
* @param blocks number of blocks to read
*/
-static int mci_read_block(struct device_d *mci_dev, void *dst, unsigned blocknum,
+static int mci_read_block(struct device_d *mci_dev, void *dst, int blocknum,
int blocks)
{
struct mci *mci = GET_MCI_DATA(mci_dev);
@@ -821,14 +821,14 @@ static int mci_startup(struct device_d *mci_dev)
mci_extract_card_capacity_from_csd(mci_dev);
/* sanitiy? */
- if (mci->read_bl_len > 512) {
- mci->read_bl_len = 512;
+ if (mci->read_bl_len > SECTOR_SIZE) {
+ mci->read_bl_len = SECTOR_SIZE;
pr_debug("Limiting max. read block size down to %u\n",
mci->read_bl_len);
}
- if (mci->write_bl_len > 512) {
- mci->write_bl_len = 512;
+ if (mci->write_bl_len > SECTOR_SIZE) {
+ mci->write_bl_len = SECTOR_SIZE;
pr_debug("Limiting max. write block size down to %u\n",
mci->read_bl_len);
}
@@ -957,73 +957,68 @@ static int sd_send_if_cond(struct device_d *mci_dev)
return 0;
}
-/* ------------------ attach to the ATA API --------------------------- */
+/* ------------------ attach to the blocklayer --------------------------- */
/**
* Write a chunk of sectors to media
- * @param disk_dev Disk device instance
- * @param sector_start Sector's number to start write to
- * @param sector_count Sectors to write
+ * @param blk All info about the block device we need
* @param buffer Buffer to write from
+ * @param block Sector's number to start write to
+ * @param num_blocks Sector count to write
* @return 0 on success, anything else on failure
*
* This routine expects the buffer has the correct size to read all data!
*/
-#ifdef CONFIG_MCI_WRITE
-static int mci_sd_write(struct device_d *disk_dev, uint64_t sector_start,
- unsigned sector_count, const void *buffer)
+static int __maybe_unused mci_sd_write(struct block_device *blk,
+ const void *buffer, int block, int num_blocks)
{
- struct ata_interface *intf = disk_dev->platform_data;
- struct device_d *mci_dev = intf->priv;
+ struct device_d *mci_dev = blk->dev;
struct mci *mci = GET_MCI_DATA(mci_dev);
int rc;
- pr_debug("%s: Write %u block(s), starting at %u\n",
- __func__, sector_count, (unsigned)sector_start);
+ pr_debug("%s: Write %d block(s), starting at %d\n",
+ __func__, num_blocks, block);
- if (mci->write_bl_len != 512) {
- pr_debug("MMC/SD block size is not 512 bytes (its %u bytes instead)\n",
- mci->read_bl_len);
+ if (mci->write_bl_len != SECTOR_SIZE) {
+ pr_debug("MMC/SD block size is not %d bytes (its %u bytes instead)\n",
+ SECTOR_SIZE, mci->read_bl_len);
return -EINVAL;
}
/* size of the block number field in the MMC/SD command is 32 bit only */
- if (sector_start > MAX_BUFFER_NUMBER) {
- pr_debug("Cannot handle block number %llu. Too large!\n",
- sector_start);
+ if (block > MAX_BUFFER_NUMBER) {
+ pr_debug("Cannot handle block number %d. Too large!\n", block);
return -EINVAL;
}
- rc = mci_block_write(mci_dev, buffer, sector_start, sector_count);
+ rc = mci_block_write(mci_dev, buffer, block, num_blocks);
if (rc != 0) {
- pr_debug("Writing block %u failed with %d\n", (unsigned)sector_start, rc);
+ pr_debug("Writing block %d failed with %d\n", block, rc);
return rc;
}
return 0;
}
-#endif
/**
- * Read a chunk of sectors from media
- * @param disk_dev Disk device instance
- * @param sector_start Sector's number to start read from
- * @param sector_count Sectors to read
+ * Read a chunk of sectors from the drive
+ * @param blk All info about the block device we need
* @param buffer Buffer to read into
+ * @param block Sector's LBA number to start read from
+ * @param num_blocks Sector count to read
* @return 0 on success, anything else on failure
*
* This routine expects the buffer has the correct size to store all data!
*/
-static int mci_sd_read(struct device_d *disk_dev, uint64_t sector_start,
- unsigned sector_count, void *buffer)
+static int mci_sd_read(struct block_device *blk, void *buffer, int block,
+ int num_blocks)
{
- struct ata_interface *intf = disk_dev->platform_data;
- struct device_d *mci_dev = intf->priv;
+ struct device_d *mci_dev = blk->dev;
struct mci *mci = GET_MCI_DATA(mci_dev);
int rc;
- pr_debug("%s: Read %u block(s), starting at %u\n",
- __func__, sector_count, (unsigned)sector_start);
+ pr_debug("%s: Read %d block(s), starting at %d\n",
+ __func__, num_blocks, block);
if (mci->read_bl_len != 512) {
pr_debug("MMC/SD block size is not 512 bytes (its %u bytes instead)\n",
@@ -1031,15 +1026,14 @@ static int mci_sd_read(struct device_d *disk_dev, uint64_t sector_start,
return -EINVAL;
}
- if (sector_start > MAX_BUFFER_NUMBER) {
- pr_err("Cannot handle block number %u. Too large!\n",
- (unsigned)sector_start);
+ if (block > MAX_BUFFER_NUMBER) {
+ pr_err("Cannot handle block number %d. Too large!\n", block);
return -EINVAL;
}
- rc = mci_read_block(mci_dev, buffer, (unsigned)sector_start, sector_count);
+ rc = mci_read_block(mci_dev, buffer, block, num_blocks);
if (rc != 0) {
- pr_debug("Reading block %u failed with %d\n", (unsigned)sector_start, rc);
+ pr_debug("Reading block %d failed with %d\n", block, rc);
return rc;
}
@@ -1178,6 +1172,25 @@ static int mci_check_if_already_initialized(struct device_d *mci_dev)
return 0;
}
+static int mci_calc_blk_cnt(uint64_t cap, unsigned shift)
+{
+ unsigned ret = cap >> shift;
+
+ if (ret > 0x7fffffff) {
+ pr_warn("Limiting card size due to 31 bit contraints\n");
+ return 0x7fffffff;
+ }
+
+ return (int)ret;
+}
+
+static struct block_device_ops mci_ops = {
+ .read = mci_sd_read,
+#ifdef CONFIG_BLOCK_WRITE
+ .write = mci_sd_write,
+#endif
+};
+
/**
* Probe an MCI card at the given host interface
* @param mci_dev MCI device instance
@@ -1187,9 +1200,7 @@ static int mci_card_probe(struct device_d *mci_dev)
{
struct mci *mci = GET_MCI_DATA(mci_dev);
struct mci_host *host = GET_MCI_PDATA(mci_dev);
- struct ata_interface *p;
int rc;
- struct device_d *dev;
/* start with a host interface reset */
rc = (host->init)(host, mci_dev);
@@ -1233,16 +1244,29 @@ static int mci_card_probe(struct device_d *mci_dev)
* An MMC/SD card acts like an ordinary disk.
* So, re-use the disk driver to gain access to this media
*/
- p = xzalloc(sizeof(struct ata_interface));
+ mci->blk.dev = mci_dev;
+ mci->blk.ops = &mci_ops;
-#ifdef CONFIG_MCI_WRITE
- p->write = mci_sd_write;
-#endif
- p->read = mci_sd_read;
- p->priv = mci_dev;
+ rc = cdev_find_free_number("disk");
+ if (rc == -1)
+ pr_err("Cannot find a free number for the disk node\n");
+
+ mci->blk.cdev.name = asprintf("disk%d", rc);
+ mci->blk.blockbits = SECTOR_SHIFT;
+ mci->blk.num_blocks = mci_calc_blk_cnt(mci->capacity, mci->blk.blockbits);
+
+ rc = blockdevice_register(&mci->blk);
+ if (rc != 0) {
+ dev_err(mci_dev, "Failed to register MCI/SD blockdevice\n");
+ goto on_error;
+ }
- dev = add_generic_device("disk", -1, NULL, 0, mci->capacity, IORESOURCE_MEM, p);
- dev_add_child(&host->dev, dev);
+ /* create partitions on demand */
+ rc = parse_partition_table(&mci->blk);
+ if (rc != 0) {
+ dev_warn(mci_dev, "No partition table found\n");
+ rc = 0; /* it's not a failure */
+ }
pr_debug("SD Card successfully added\n");
@@ -1373,8 +1397,9 @@ device_initcall(mci_init);
*/
int mci_register(struct mci_host *host)
{
- struct device_d *mci_dev = &host->dev;
+ struct device_d *mci_dev = xzalloc(sizeof(struct device_d));
+ mci_dev->id = -1;
strcpy(mci_dev->name, mci_driver.name);
mci_dev->platform_data = (void*)host;
dev_add_child(host->hw_dev, mci_dev);
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index f6c8c06..b80c039 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -1,2 +1,3 @@
config USB_STORAGE
tristate "USB Mass Storage support"
+ select DISK
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 6dba8cc..b201b2b 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -195,33 +195,32 @@ static int usb_stor_write_10(ccb *srb, struct us_data *us,
#define US_MAX_IO_BLK 32
+#define to_usb_mass_storage(x) container_of((x), struct us_blk_dev, blk)
+
enum { io_rd, io_wr };
/* Read / write a chunk of sectors on media */
-static int usb_stor_blk_io(int io_op, struct device_d *disk_dev,
- uint64_t sector_start, unsigned sector_count,
- void *buffer)
+static int usb_stor_blk_io(int io_op, struct block_device *disk_dev,
+ int sector_start, int sector_count, void *buffer)
{
- struct ata_interface *pata_if = disk_dev->platform_data;
- struct us_blk_dev *pblk_dev = (struct us_blk_dev *)pata_if->priv;
+ struct us_blk_dev *pblk_dev = to_usb_mass_storage(disk_dev);
struct us_data *us = pblk_dev->us;
ccb us_ccb;
- ushort const sector_size = 512;
unsigned sectors_done;
if (sector_count == 0)
return 0;
/* check for unsupported block size */
- if (pblk_dev->blksz != sector_size) {
- US_DEBUGP("%s: unsupported block size %lu\n",
- __func__, pblk_dev->blksz);
+ if (pblk_dev->blk.blockbits != SECTOR_SHIFT) {
+ US_DEBUGP("%s: unsupported block shift %d\n",
+ __func__, pblk_dev->blk.blockbits);
return -EINVAL;
}
/* check for invalid sector_start */
- if (sector_start >= pblk_dev->blknum || sector_start > (ulong)-1) {
- US_DEBUGP("%s: start sector %llu too large\n",
+ if (sector_start >= pblk_dev->blk.num_blocks || sector_start > (ulong)-1) {
+ US_DEBUGP("%s: start sector %d too large\n",
__func__, sector_start);
return -EINVAL;
}
@@ -242,21 +241,21 @@ static int usb_stor_blk_io(int io_op, struct device_d *disk_dev,
sector_count = INT_MAX;
US_DEBUGP("Restricting I/O to %u blocks\n", sector_count);
}
- if (sector_start + sector_count > pblk_dev->blknum) {
- sector_count = pblk_dev->blknum - sector_start;
+ if (sector_start + sector_count > pblk_dev->blk.num_blocks) {
+ sector_count = pblk_dev->blk.num_blocks - sector_start;
US_DEBUGP("Restricting I/O to %u blocks\n", sector_count);
}
/* read / write the requested data */
- US_DEBUGP("%s %u block(s), starting from %llu\n",
+ US_DEBUGP("%s %u block(s), starting from %d\n",
((io_op == io_rd) ? "Read" : "Write"),
sector_count, sector_start);
sectors_done = 0;
while (sector_count > 0) {
int result;
- ushort n = (ushort)min(sector_count, US_MAX_IO_BLK);
- us_ccb.pdata = buffer + sectors_done * sector_size;
- us_ccb.datalen = n * (ulong)sector_size;
+ unsigned n = min(sector_count, US_MAX_IO_BLK);
+ us_ccb.pdata = buffer + (sectors_done * SECTOR_SIZE);
+ us_ccb.datalen = n * SECTOR_SIZE;
if (io_op == io_rd)
result = usb_stor_read_10(&us_ccb, us,
(ulong)sector_start, n);
@@ -264,7 +263,7 @@ static int usb_stor_blk_io(int io_op, struct device_d *disk_dev,
result = usb_stor_write_10(&us_ccb, us,
(ulong)sector_start, n);
if (result != 0) {
- US_DEBUGP("I/O error at sector %llu\n", sector_start);
+ US_DEBUGP("I/O error at sector %d\n", sector_start);
break;
}
sector_start += n;
@@ -274,27 +273,31 @@ static int usb_stor_blk_io(int io_op, struct device_d *disk_dev,
usb_disable_asynch(0);
- US_DEBUGP("Successful I/O of %u blocks\n", sectors_done);
+ US_DEBUGP("Successful I/O of %d blocks\n", sectors_done);
return (sector_count != 0) ? -EIO : 0;
}
/* Write a chunk of sectors to media */
-static int usb_stor_blk_write(struct device_d *disk_dev, uint64_t sector_start,
- unsigned sector_count, const void *buffer)
+static int __maybe_unused usb_stor_blk_write(struct block_device *blk,
+ const void *buffer, int block, int num_blocks)
{
- return usb_stor_blk_io(io_wr, disk_dev, sector_start, sector_count,
- (void *)buffer);
+ return usb_stor_blk_io(io_wr, blk, block, num_blocks, (void *)buffer);
}
/* Read a chunk of sectors from media */
-static int usb_stor_blk_read(struct device_d *disk_dev, uint64_t sector_start,
- unsigned sector_count, void *buffer)
+static int usb_stor_blk_read(struct block_device *blk, void *buffer, int block,
+ int num_blocks)
{
- return usb_stor_blk_io(io_rd, disk_dev, sector_start, sector_count,
- buffer);
+ return usb_stor_blk_io(io_rd, blk, block, num_blocks, buffer);
}
+static struct block_device_ops usb_mass_storage_ops = {
+ .read = usb_stor_blk_read,
+#ifdef CONFIG_BLOCK_WRITE
+ .write = usb_stor_blk_write,
+#endif
+};
/***********************************************************************
* Block device routines
@@ -302,6 +305,16 @@ static int usb_stor_blk_read(struct device_d *disk_dev, uint64_t sector_start,
static unsigned char us_io_buf[512];
+static int usb_limit_blk_cnt(unsigned cnt)
+{
+ if (cnt > 0x7fffffff) {
+ pr_warn("Limiting device size due to 31 bit contraints\n");
+ return 0x7fffffff;
+ }
+
+ return (int)cnt;
+}
+
/* Prepare a disk device */
static int usb_stor_init_blkdev(struct us_blk_dev *pblk_dev)
{
@@ -313,7 +326,7 @@ static int usb_stor_init_blkdev(struct us_blk_dev *pblk_dev)
us_ccb.pdata = us_io_buf;
us_ccb.lun = pblk_dev->lun;
- pblk_dev->blknum = 0;
+ pblk_dev->blk.num_blocks = 0;
usb_disable_asynch(1);
/* get device info */
@@ -350,11 +363,12 @@ static int usb_stor_init_blkdev(struct us_blk_dev *pblk_dev)
}
pcap = (unsigned long *)us_ccb.pdata;
US_DEBUGP("Read Capacity returns: 0x%lx, 0x%lx\n", pcap[0], pcap[1]);
- pblk_dev->blknum = be32_to_cpu(pcap[0]);
- pblk_dev->blksz = be32_to_cpu(pcap[1]);
- pblk_dev->blknum++;
- US_DEBUGP("Capacity = 0x%llx, blocksz = 0x%lx\n",
- pblk_dev->blknum, pblk_dev->blksz);
+ pblk_dev->blk.num_blocks = usb_limit_blk_cnt(be32_to_cpu(pcap[0]) + 1);
+ if (be32_to_cpu(pcap[1]) != SECTOR_SIZE)
+ pr_warn("Support only %d bytes sectors\n", SECTOR_SIZE);
+ pblk_dev->blk.blockbits = SECTOR_SHIFT;
+ US_DEBUGP("Capacity = 0x%x, blockshift = 0x%x\n",
+ pblk_dev->blk.num_blocks, pblk_dev->blk.blockbits);
Exit:
usb_disable_asynch(0);
@@ -362,39 +376,45 @@ Exit:
}
/* Create and register a disk device for the specified LUN */
-static int usb_stor_add_blkdev(struct us_data *us, unsigned char lun)
+static int usb_stor_add_blkdev(struct us_data *us, struct device_d *dev,
+ unsigned char lun)
{
struct us_blk_dev *pblk_dev;
- struct device_d *pdev;
- struct ata_interface *pata_if;
int result;
- /* allocate blk dev data */
- pblk_dev = (struct us_blk_dev *)malloc(sizeof(struct us_blk_dev));
- if (!pblk_dev)
- return -ENOMEM;
- memset(pblk_dev, 0, sizeof(struct us_blk_dev));
+ /* allocate a new USB block device */
+ pblk_dev = xzalloc(sizeof(struct us_blk_dev));
/* initialize blk dev data */
+ pblk_dev->blk.dev = dev;
+ pblk_dev->blk.ops = &usb_mass_storage_ops;
pblk_dev->us = us;
pblk_dev->lun = lun;
- pata_if = &pblk_dev->ata_if;
- pata_if->read = &usb_stor_blk_read;
- pata_if->write = &usb_stor_blk_write;
- pata_if->priv = pblk_dev;
- pdev = &pblk_dev->dev;
- strcpy(pdev->name, "disk");
- pdev->platform_data = pata_if;
/* read some info and get the unit ready */
result = usb_stor_init_blkdev(pblk_dev);
if (result < 0)
goto BadDevice;
- /* register disk device */
- result = register_device(pdev);
- if (result < 0)
+ result = cdev_find_free_number("disk");
+ if (result == -1)
+ pr_err("Cannot find a free number for the disk node\n");
+ pr_info("Using index %d for the new disk\n", result);
+
+ pblk_dev->blk.cdev.name = asprintf("disk%d", result);
+ pblk_dev->blk.blockbits = SECTOR_SHIFT;
+
+ result = blockdevice_register(&pblk_dev->blk);
+ if (result != 0) {
+ dev_err(dev, "Failed to register blockdevice\n");
goto BadDevice;
+ }
+
+ /* create partitions on demand */
+ result = parse_partition_table(&pblk_dev->blk);
+ if (result != 0)
+ dev_warn(dev, "No partition table found\n");
+
list_add_tail(&pblk_dev->list, &us_blkdev_list);
US_DEBUGP("USB disk device successfully added\n");
@@ -485,7 +505,7 @@ static int usb_stor_scan(struct usb_device *usbdev, struct us_data *us)
/* register a disk device for each active LUN */
for (lun=0; lun<=us->max_lun; lun++) {
- if (usb_stor_add_blkdev(us, lun) == 0)
+ if (usb_stor_add_blkdev(us, &usbdev->dev, lun) == 0)
num_devs++;
}
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 17a1e12..5942393 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -26,7 +26,8 @@
#define _STORAGE_USB_H_
#include <usb/usb.h>
-#include <ata.h>
+#include <block.h>
+#include <disks.h>
#include <scsi.h>
#include <linux/list.h>
@@ -85,10 +86,7 @@ struct us_data {
/* one us_blk_dev object allocated per LUN */
struct us_blk_dev {
struct us_data *us; /* LUN's enclosing dev */
- struct device_d dev; /* intf to generic driver */
- struct ata_interface ata_if; /* intf to "disk" driver */
- uint64_t blknum; /* capacity */
- unsigned long blksz; /* block size */
+ struct block_device blk; /* the blockdevice for the dev */
unsigned char lun; /* the LUN of this blk dev */
struct list_head list; /* siblings */
};
diff --git a/include/mci.h b/include/mci.h
index 69cffe8..2375581 100644
--- a/include/mci.h
+++ b/include/mci.h
@@ -31,6 +31,7 @@
#define _MCI_H_
#include <linux/list.h>
+#include <block.h>
/* Firmware revisions for SD cards */
#define SD_VERSION_SD 0x20000
@@ -194,7 +195,6 @@ struct mci_data {
/** host information */
struct mci_host {
struct device_d *hw_dev; /**< the host MCI hardware device */
- struct device_d dev; /**< our device */
unsigned voltages;
unsigned host_caps; /**< Host's interface capabilities, refer MMC_VDD_* */
unsigned f_min; /**< host interface lower limit */
@@ -212,6 +212,7 @@ struct mci_host {
/** MMC/SD and interface instance information */
struct mci {
+ struct block_device blk; /**< the blockdevice for the card */
unsigned version;
/** != 0 when a high capacity card is connected (OCR -> OCR_HCS) */
int high_capacity;
--
1.7.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2011-11-22 8:30 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-22 8:29 [PATCHv2] Rework of handling disk like media Juergen Beisert
2011-11-22 8:29 ` [PATCH 01/13] USB Mass Storage driver: Fix compile time warning Juergen Beisert
2011-11-22 8:29 ` [PATCH 02/13] Create a unique cdev number for on demand devices Juergen Beisert
2011-11-22 8:29 ` [PATCH 03/13] ATA/DISK: Add generic disk support when enabling the BIOS disk driver Juergen Beisert
2011-11-22 8:29 ` [PATCH 04/13] ATA/DISK: Enabling write support does not belong to 'drive types' Juergen Beisert
2011-11-22 8:29 ` [PATCH 05/13] ATA/DISK: Reorganize file structure and names for future updates Juergen Beisert
2011-11-22 8:29 ` [PATCH 06/13] ATA/DISK: The BIOS based disk driver is not an interface Juergen Beisert
2011-11-22 8:29 ` [PATCH 07/13] ATA/DISK: Share important constants and structures Juergen Beisert
2011-11-22 8:29 ` [PATCH 08/13] DISK: Add common partition handling for disk like media Juergen Beisert
2011-11-22 8:29 ` Juergen Beisert [this message]
2011-11-22 8:29 ` [PATCH 10/13] Remove 'disk_drive.c' as it is now replaced by generic partition handling Juergen Beisert
2011-11-22 8:29 ` [PATCH 11/13] ATA/DISK: Remove the now unused header <ata.h> Juergen Beisert
2011-11-22 8:29 ` [PATCH 12/13] ATA Disk Support: Add support for native ATA type drives Juergen Beisert
2011-11-22 8:29 ` [PATCH 13/13] Add driver for IDE like interfaces Juergen Beisert
-- strict thread matches above, loose matches on Subject: below --
2011-11-24 12:43 [PATCHv3] Rework of handling disk like media Juergen Beisert
2011-11-24 12:43 ` [PATCH 09/13] Use generic block layer to access the drives and do partition parsing Juergen Beisert
2011-11-16 9:24 Rework of handling disk like media Juergen Beisert
2011-11-16 9:24 ` [PATCH 09/13] Use generic block layer to access the drives and do partition parsing Juergen Beisert
2011-11-17 17:55 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1321950567-13261-10-git-send-email-jbe@pengutronix.de \
--to=jbe@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox