* [PATCH 1/3] crypto: Add crc7 function
2011-11-24 20:46 [PATCH 0/3] Add MCI over SPI support franck.jullien
@ 2011-11-24 20:46 ` franck.jullien
2011-11-24 20:46 ` [PATCH 2/3 v2] mci: Add MCI over SPI support franck.jullien
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: franck.jullien @ 2011-11-24 20:46 UTC (permalink / raw)
To: barebox
From: Franck Jullien <franck.jullien@gmail.com>
This function in used by the MCI over SPI driver.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
---
crypto/Kconfig | 3 ++
crypto/Makefile | 1 +
crypto/crc7.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/crc7.h | 14 ++++++++++++
4 files changed, 81 insertions(+), 0 deletions(-)
create mode 100644 crypto/crc7.c
create mode 100644 include/crc7.h
diff --git a/crypto/Kconfig b/crypto/Kconfig
index a391ae6..a6fc1b8 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -4,6 +4,9 @@ config CRC32
config CRC16
bool
+config CRC7
+ bool
+
menuconfig DIGEST
bool "Digest "
diff --git a/crypto/Makefile b/crypto/Makefile
index 955a66d..7c5b035 100644
--- a/crypto/Makefile
+++ b/crypto/Makefile
@@ -1,5 +1,6 @@
obj-$(CONFIG_CRC32) += crc32.o
obj-$(CONFIG_CRC16) += crc16.o
+obj-$(CONFIG_CRC7) += crc7.o
obj-$(CONFIG_MD5) += md5.o
obj-$(CONFIG_SHA1) += sha1.o
obj-$(CONFIG_SHA224) += sha2.o
diff --git a/crypto/crc7.c b/crypto/crc7.c
new file mode 100644
index 0000000..8022199
--- /dev/null
+++ b/crypto/crc7.c
@@ -0,0 +1,63 @@
+/*
+ * crc7.c
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#include <common.h>
+#include <crc7.h>
+
+
+/* Table for CRC-7 (polynomial x^7 + x^3 + 1) */
+const u8 crc7_syndrome_table[256] = {
+ 0x00, 0x09, 0x12, 0x1b, 0x24, 0x2d, 0x36, 0x3f,
+ 0x48, 0x41, 0x5a, 0x53, 0x6c, 0x65, 0x7e, 0x77,
+ 0x19, 0x10, 0x0b, 0x02, 0x3d, 0x34, 0x2f, 0x26,
+ 0x51, 0x58, 0x43, 0x4a, 0x75, 0x7c, 0x67, 0x6e,
+ 0x32, 0x3b, 0x20, 0x29, 0x16, 0x1f, 0x04, 0x0d,
+ 0x7a, 0x73, 0x68, 0x61, 0x5e, 0x57, 0x4c, 0x45,
+ 0x2b, 0x22, 0x39, 0x30, 0x0f, 0x06, 0x1d, 0x14,
+ 0x63, 0x6a, 0x71, 0x78, 0x47, 0x4e, 0x55, 0x5c,
+ 0x64, 0x6d, 0x76, 0x7f, 0x40, 0x49, 0x52, 0x5b,
+ 0x2c, 0x25, 0x3e, 0x37, 0x08, 0x01, 0x1a, 0x13,
+ 0x7d, 0x74, 0x6f, 0x66, 0x59, 0x50, 0x4b, 0x42,
+ 0x35, 0x3c, 0x27, 0x2e, 0x11, 0x18, 0x03, 0x0a,
+ 0x56, 0x5f, 0x44, 0x4d, 0x72, 0x7b, 0x60, 0x69,
+ 0x1e, 0x17, 0x0c, 0x05, 0x3a, 0x33, 0x28, 0x21,
+ 0x4f, 0x46, 0x5d, 0x54, 0x6b, 0x62, 0x79, 0x70,
+ 0x07, 0x0e, 0x15, 0x1c, 0x23, 0x2a, 0x31, 0x38,
+ 0x41, 0x48, 0x53, 0x5a, 0x65, 0x6c, 0x77, 0x7e,
+ 0x09, 0x00, 0x1b, 0x12, 0x2d, 0x24, 0x3f, 0x36,
+ 0x58, 0x51, 0x4a, 0x43, 0x7c, 0x75, 0x6e, 0x67,
+ 0x10, 0x19, 0x02, 0x0b, 0x34, 0x3d, 0x26, 0x2f,
+ 0x73, 0x7a, 0x61, 0x68, 0x57, 0x5e, 0x45, 0x4c,
+ 0x3b, 0x32, 0x29, 0x20, 0x1f, 0x16, 0x0d, 0x04,
+ 0x6a, 0x63, 0x78, 0x71, 0x4e, 0x47, 0x5c, 0x55,
+ 0x22, 0x2b, 0x30, 0x39, 0x06, 0x0f, 0x14, 0x1d,
+ 0x25, 0x2c, 0x37, 0x3e, 0x01, 0x08, 0x13, 0x1a,
+ 0x6d, 0x64, 0x7f, 0x76, 0x49, 0x40, 0x5b, 0x52,
+ 0x3c, 0x35, 0x2e, 0x27, 0x18, 0x11, 0x0a, 0x03,
+ 0x74, 0x7d, 0x66, 0x6f, 0x50, 0x59, 0x42, 0x4b,
+ 0x17, 0x1e, 0x05, 0x0c, 0x33, 0x3a, 0x21, 0x28,
+ 0x5f, 0x56, 0x4d, 0x44, 0x7b, 0x72, 0x69, 0x60,
+ 0x0e, 0x07, 0x1c, 0x15, 0x2a, 0x23, 0x38, 0x31,
+ 0x46, 0x4f, 0x54, 0x5d, 0x62, 0x6b, 0x70, 0x79
+};
+
+/**
+ * crc7 - update the CRC7 for the data buffer
+ * @crc: previous CRC7 value
+ * @buffer: data pointer
+ * @len: number of bytes in the buffer
+ * Context: any
+ *
+ * Returns the updated CRC7 value.
+ */
+u8 crc7(u8 crc, const u8 *buffer, size_t len)
+{
+ while (len--)
+ crc = crc7_byte(crc, *buffer++);
+ return crc;
+}
+EXPORT_SYMBOL(crc7);
diff --git a/include/crc7.h b/include/crc7.h
new file mode 100644
index 0000000..0c41cc3
--- /dev/null
+++ b/include/crc7.h
@@ -0,0 +1,14 @@
+#ifndef _LINUX_CRC7_H
+#define _LINUX_CRC7_H
+#include <common.h>
+
+extern const u8 crc7_syndrome_table[256];
+
+static inline u8 crc7_byte(u8 crc, u8 data)
+{
+ return crc7_syndrome_table[(crc << 1) ^ data];
+}
+
+extern u8 crc7(u8 crc, const u8 *buffer, size_t len);
+
+#endif
--
1.7.7
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH 2/3 v2] mci: Add MCI over SPI support
2011-11-24 20:46 [PATCH 0/3] Add MCI over SPI support franck.jullien
2011-11-24 20:46 ` [PATCH 1/3] crypto: Add crc7 function franck.jullien
@ 2011-11-24 20:46 ` franck.jullien
2011-11-24 20:46 ` [PATCH 3/3] spi/altera_spi: Add cs_change support franck.jullien
2011-11-25 11:40 ` [PATCH 0/3] Add MCI over SPI support Sascha Hauer
3 siblings, 0 replies; 5+ messages in thread
From: franck.jullien @ 2011-11-24 20:46 UTC (permalink / raw)
To: barebox
From: Franck Jullien <franck.jullien@gmail.com>
This patch adds MMC over SPI support to mci-core.c and
mci_spi.c driver.
This driver is useful when SOC doesn't have built-in MCI
component. Tested with nios, 2Go SD-CARD and FAT file system.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
---
drivers/mci/Kconfig | 17 ++
drivers/mci/Makefile | 1 +
drivers/mci/mci-core.c | 69 ++++++--
drivers/mci/mci_spi.c | 435 ++++++++++++++++++++++++++++++++++++++++++++++++
include/mci.h | 18 ++
5 files changed, 524 insertions(+), 16 deletions(-)
create mode 100644 drivers/mci/mci_spi.c
diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig
index 0d5a0e0..ed88abb 100644
--- a/drivers/mci/Kconfig
+++ b/drivers/mci/Kconfig
@@ -80,4 +80,21 @@ config MCI_ATMEL
Enable this entry to add support to read and write SD cards on a
Atmel AT91.
+config MCI_SPI
+ bool "MMC/SD over SPI"
+ help
+ Some systems access MMC/SD/SDIO cards using a SPI controller
+ instead of using a "native" MMC/SD/SDIO controller. This has a
+ disadvantage of being relatively high overhead, but a compensating
+ advantage of working on many systems without dedicated MMC/SD/SDIO
+ controllers.
+
+config MMC_SPI_CRC_ON
+ bool "Enable CRC protection for transfers"
+ select CRC7
+ select CRC16
+ depends on MCI_SPI
+ help
+ Enable CRC protection for transfers
+
endif
diff --git a/drivers/mci/Makefile b/drivers/mci/Makefile
index 4fc0046..d7482dc 100644
--- a/drivers/mci/Makefile
+++ b/drivers/mci/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_MCI_IMX) += imx.o
obj-$(CONFIG_MCI_IMX_ESDHC) += imx-esdhc.o
obj-$(CONFIG_MCI_OMAP_HSMMC) += omap_hsmmc.o
obj-$(CONFIG_MCI_ATMEL) += atmel_mci.o
+obj-$(CONFIG_MCI_SPI) += mci_spi.o
diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
index 09f7e29..734fa0d 100644
--- a/drivers/mci/mci-core.c
+++ b/drivers/mci/mci-core.c
@@ -218,6 +218,7 @@ static int sd_send_op_cond(struct device_d *mci_dev)
int timeout = 1000;
int err;
unsigned voltages;
+ unsigned busy;
/*
* Most cards do not answer if some reserved bits
@@ -237,7 +238,7 @@ static int sd_send_op_cond(struct device_d *mci_dev)
}
mci_setup_cmd(&cmd, SD_CMD_APP_SEND_OP_COND,
- voltages | (mci->version == SD_VERSION_2 ? OCR_HCS : 0),
+ mmc_host_is_spi(host) ? 0 : (voltages | (mci->version == SD_VERSION_2 ? OCR_HCS : 0)),
MMC_RSP_R3);
err = mci_send_cmd(mci_dev, &cmd, NULL);
if (err) {
@@ -245,7 +246,13 @@ static int sd_send_op_cond(struct device_d *mci_dev)
return err;
}
udelay(1000);
- } while ((!(cmd.response[0] & OCR_BUSY)) && timeout--);
+
+ if (mmc_host_is_spi(host))
+ busy = cmd.response[0] & R1_SPI_IDLE;
+ else
+ busy = !(cmd.response[0] & OCR_BUSY);
+
+ } while (busy && timeout--);
if (timeout <= 0) {
pr_debug("SD operation condition set timed out\n");
@@ -255,6 +262,13 @@ static int sd_send_op_cond(struct device_d *mci_dev)
if (mci->version != SD_VERSION_2)
mci->version = SD_VERSION_1_0;
+ if (mmc_host_is_spi(host)) { /* read OCR for spi */
+ mci_setup_cmd(&cmd, MMC_CMD_SPI_READ_OCR, 0, MMC_RSP_R3);
+ err = mci_send_cmd(mci_dev, &cmd, NULL);
+ if (err)
+ return err;
+ }
+
mci->ocr = cmd.response[0];
mci->high_capacity = ((mci->ocr & OCR_HCS) == OCR_HCS);
@@ -453,11 +467,17 @@ static int sd_change_freq(struct device_d *mci_dev)
struct mci *mci = GET_MCI_DATA(mci_dev);
struct mci_cmd cmd;
struct mci_data data;
+#ifdef CONFIG_MCI_SPI
+ struct mci_host *host = GET_MCI_PDATA(mci_dev);
+#endif
uint32_t *switch_status = sector_buf;
uint32_t *scr = sector_buf;
int timeout;
int err;
+ if (mmc_host_is_spi(host))
+ return 0;
+
pr_debug("Changing transfer frequency\n");
mci->card_caps = 0;
@@ -748,10 +768,23 @@ static int mci_startup(struct device_d *mci_dev)
struct mci_cmd cmd;
int err;
+#ifdef CONFIG_MMC_SPI_CRC_ON
+ if (mmc_host_is_spi(host)) { /* enable CRC check for spi */
+
+ mci_setup_cmd(&cmd, MMC_CMD_SPI_CRC_ON_OFF, 1, MMC_RSP_R1);
+ err = mci_send_cmd(mci_dev, &cmd, NULL);
+
+ if (err) {
+ pr_debug("Can't enable CRC check : %d\n", err);
+ return err;
+ }
+ }
+#endif
+
pr_debug("Put the Card in Identify Mode\n");
/* Put the Card in Identify Mode */
- mci_setup_cmd(&cmd, MMC_CMD_ALL_SEND_CID, 0, MMC_RSP_R2);
+ mci_setup_cmd(&cmd, mmc_host_is_spi(host) ? MMC_CMD_SEND_CID : MMC_CMD_ALL_SEND_CID, 0, MMC_RSP_R2);
err = mci_send_cmd(mci_dev, &cmd, NULL);
if (err) {
pr_debug("Can't bring card into identify mode: %d\n", err);
@@ -768,12 +801,14 @@ static int mci_startup(struct device_d *mci_dev)
* For SD cards, get the Relatvie Address.
* This also puts the cards into Standby State
*/
- pr_debug("Get/Set relative address\n");
- mci_setup_cmd(&cmd, SD_CMD_SEND_RELATIVE_ADDR, mci->rca << 16, MMC_RSP_R6);
- err = mci_send_cmd(mci_dev, &cmd, NULL);
- if (err) {
- pr_debug("Get/Set relative address failed: %d\n", err);
- return err;
+ if (!mmc_host_is_spi(host)) { /* cmd not supported in spi */
+ pr_debug("Get/Set relative address\n");
+ mci_setup_cmd(&cmd, SD_CMD_SEND_RELATIVE_ADDR, mci->rca << 16, MMC_RSP_R6);
+ err = mci_send_cmd(mci_dev, &cmd, NULL);
+ if (err) {
+ pr_debug("Get/Set relative address failed: %d\n", err);
+ return err;
+ }
}
if (IS_SD(mci))
@@ -814,13 +849,15 @@ static int mci_startup(struct device_d *mci_dev)
pr_debug("Read block length: %u, Write block length: %u\n",
mci->read_bl_len, mci->write_bl_len);
- pr_debug("Select the card, and put it into Transfer Mode\n");
- /* Select the card, and put it into Transfer Mode */
- mci_setup_cmd(&cmd, MMC_CMD_SELECT_CARD, mci->rca << 16, MMC_RSP_R1b);
- err = mci_send_cmd(mci_dev, &cmd, NULL);
- if (err) {
- pr_debug("Putting in transfer mode failed: %d\n", err);
- return err;
+ if (!mmc_host_is_spi(host)) { /* cmd not supported in spi */
+ pr_debug("Select the card, and put it into Transfer Mode\n");
+ /* Select the card, and put it into Transfer Mode */
+ mci_setup_cmd(&cmd, MMC_CMD_SELECT_CARD, mci->rca << 16, MMC_RSP_R1b);
+ err = mci_send_cmd(mci_dev, &cmd, NULL);
+ if (err) {
+ pr_debug("Putting in transfer mode failed: %d\n", err);
+ return err;
+ }
}
if (IS_SD(mci))
diff --git a/drivers/mci/mci_spi.c b/drivers/mci/mci_spi.c
new file mode 100644
index 0000000..1977e8c
--- /dev/null
+++ b/drivers/mci/mci_spi.c
@@ -0,0 +1,435 @@
+/*
+ * (C) Copyright 2011 - Franck JULLIEN <elec4fun@gmail.com>
+ *
+ * This code was inspired from u-boot mmc_spi.c:
+ * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw>
+ *
+ * and linux mmc_spi.c:
+ * (C) Copyright 2005, Intec Automation,
+ * Mike Lavender (mike@steroidmicros)
+ * (C) Copyright 2006-2007, David Brownell
+ * (C) Copyright 2007, Axis Communications,
+ * Hans-Peter Nilsson (hp@axis.com)
+ * (C) Copyright 2007, ATRON electronic GmbH,
+ * Jan Nikitenko <jan.nikitenko@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <errno.h>
+#include <clock.h>
+#include <asm/io.h>
+#include <driver.h>
+#include <spi/spi.h>
+#include <mci.h>
+#include <crc.h>
+#include <crc7.h>
+
+#define to_spi_host(mci) container_of(mci, struct mmc_spi_host, mci)
+#define spi_setup(spi) spi->master->setup(spi)
+
+/* Response tokens used to ack each block written: */
+#define SPI_MMC_RESPONSE_CODE(x) ((x) & 0x1f)
+#define SPI_RESPONSE_ACCEPTED ((2 << 1)|1)
+
+/* Read and write blocks start with these tokens and end with crc;
+ * on error, read tokens act like a subset of R2_SPI_* values.
+ */
+#define SPI_TOKEN_SINGLE 0xFE /* single block r/w, multiblock read */
+#define SPI_TOKEN_MULTI_WRITE 0xFC /* multiblock write */
+#define SPI_TOKEN_STOP_TRAN 0xFD /* terminate multiblock write */
+
+/* MMC SPI commands start with a start bit "0" and a transmit bit "1" */
+#define MMC_SPI_CMD(x) (0x40 | (x & 0x3F))
+
+#define MMC_SPI_BLOCKSIZE 512
+
+/* timeout value */
+#define CTOUT 8
+#define RTOUT 3000000 /* 1 sec */
+#define WTOUT 3000000 /* 1 sec */
+
+#ifndef CONFIG_MMC_SPI_CRC_ON
+/* Note that while the CRC, in general, is ignored in SPI mode, the very first
+ * command must be followed by a valid CRC, since the card is not yet in SPI mode.
+ * The CRC byte for a CMD0 command with a zero argument is a constant 0x4A. For
+ * simplicity, this CRC byte is always sent with every command.
+ */
+
+static inline u8 crc7(u8 crc, const u8 *buffer, size_t len)
+{
+ /* This is the crc7 value for a CMD0 command with a zero argument.
+ * It'll be left shifted and ored with '1' in mmc_spi_command_send
+ * to give 0x95 (also known as the CMD0 constant CRC value...)
+ */
+ return 0x4A;
+}
+#endif
+
+struct mmc_spi_host {
+ struct mci_host mci;
+ struct spi_device *spi;
+ struct device_d *dev;
+
+ /* for bulk data transfers */
+ struct spi_transfer t_tx;
+ struct spi_message m_tx;
+
+ /* for status readback */
+ struct spi_transfer t_rx;
+ struct spi_message m_rx;
+
+ void *ones;
+};
+
+static char *maptype(struct mci_cmd *cmd)
+{
+ switch (cmd->resp_type) {
+ case MMC_RSP_NONE: return "NONE";
+ case MMC_RSP_R1: return "R1";
+ case MMC_RSP_R1b: return "R1B";
+ case MMC_RSP_R2: return "R2/R5";
+ case MMC_RSP_R3: return "R3/R4/R7";
+ default: return "?";
+ }
+}
+
+static inline int mmc_cs_off(struct mmc_spi_host *host)
+{
+ /* chipselect will always be inactive after setup() */
+ return spi_setup(host->spi);
+}
+
+static int
+mmc_spi_readbytes(struct mmc_spi_host *host, unsigned len, void *data)
+{
+ int status;
+
+ host->t_rx.len = len;
+ host->t_rx.rx_buf = data;
+
+ status = spi_sync(host->spi, &host->m_rx);
+
+ return status;
+}
+
+static int
+mmc_spi_writebytes(struct mmc_spi_host *host, unsigned len, void *data)
+{
+ int status;
+
+ host->t_tx.len = len;
+ host->t_tx.tx_buf = data;
+
+ status = spi_sync(host->spi, &host->m_tx);
+
+ return status;
+}
+
+static int mmc_spi_command_send(struct mmc_spi_host *host, struct mci_cmd *cmd)
+{
+ uint8_t r1;
+ uint8_t command[7];
+ int i;
+
+ command[0] = 0xff;
+ command[1] = MMC_SPI_CMD(cmd->cmdidx);
+ command[2] = cmd->cmdarg >> 24;
+ command[3] = cmd->cmdarg >> 16;
+ command[4] = cmd->cmdarg >> 8;
+ command[5] = cmd->cmdarg;
+ command[6] = (crc7(0, &command[1], 5) << 1) | 0x01;
+
+ mmc_spi_writebytes(host, 7, command);
+
+ for (i = 0; i < CTOUT; i++) {
+ mmc_spi_readbytes(host, 1, &r1);
+ if (i && ((r1 & 0x80) == 0)) { /* r1 response */
+ dev_dbg(host->dev, "%s: CMD%d, TRY %d, RESP %x\n", __func__, cmd->cmdidx, i, r1);
+ break;
+ }
+ }
+
+ return r1;
+}
+
+static uint mmc_spi_readdata(struct mmc_spi_host *host, void *xbuf,
+ uint32_t bcnt, uint32_t bsize)
+{
+ uint8_t *buf = xbuf;
+ uint8_t r1;
+ uint16_t crc;
+ int i;
+
+ while (bcnt--) {
+ for (i = 0; i < RTOUT; i++) {
+ mmc_spi_readbytes(host, 1, &r1);
+ if (r1 != 0xff) /* data token */
+ break;
+ }
+ if (r1 == SPI_TOKEN_SINGLE) {
+ mmc_spi_readbytes(host, bsize, buf);
+ mmc_spi_readbytes(host, 2, &crc);
+#ifdef CONFIG_MMC_SPI_CRC_ON
+ if (swab16(cyg_crc16(buf, bsize)) != crc) {
+ dev_dbg(host->dev, "%s: CRC error\n", __func__);
+ r1 = R1_SPI_COM_CRC;
+ break;
+ }
+#endif
+ r1 = 0;
+ } else {
+ r1 = R1_SPI_ERROR;
+ break;
+ }
+ buf += bsize;
+ }
+
+ return r1;
+}
+
+static uint mmc_spi_writedata(struct mmc_spi_host *host, const void *xbuf,
+ uint32_t bcnt, uint32_t bsize, int multi)
+{
+ const uint8_t *buf = xbuf;
+ uint8_t r1;
+ uint16_t crc = 0;
+ uint8_t tok[2];
+ int i;
+
+ tok[0] = 0xff;
+ tok[1] = multi ? SPI_TOKEN_MULTI_WRITE : SPI_TOKEN_SINGLE;
+
+ while (bcnt--) {
+#ifdef CONFIG_MMC_SPI_CRC_ON
+ crc = swab16(cyg_crc16((u8 *)buf, bsize));
+#endif
+ mmc_spi_writebytes(host, 2, tok);
+ mmc_spi_writebytes(host, bsize, (void *)buf);
+ mmc_spi_writebytes(host, 2, &crc);
+
+ for (i = 0; i < CTOUT; i++) {
+ mmc_spi_readbytes(host, 1, &r1);
+ if ((r1 & 0x11) == 0x01) /* response token */
+ break;
+ }
+
+ dev_dbg(host->dev,"%s : TOKEN%d RESP 0x%X\n", __func__, i, r1);
+ if (SPI_MMC_RESPONSE_CODE(r1) == SPI_RESPONSE_ACCEPTED) {
+ for (i = 0; i < WTOUT; i++) { /* wait busy */
+ mmc_spi_readbytes(host, 1, &r1);
+ if (i && r1 == 0xff) {
+ r1 = 0;
+ break;
+ }
+ }
+ if (i == WTOUT) {
+ dev_dbg(host->dev, "%s: wtout %x\n", __func__, r1);
+ r1 = R1_SPI_ERROR;
+ break;
+ }
+ } else {
+ dev_dbg(host->dev, "%s: err %x\n", __func__, r1);
+ r1 = R1_SPI_COM_CRC;
+ break;
+ }
+ buf += bsize;
+ }
+
+ if (multi && bcnt == -1) { /* stop multi write */
+ tok[1] = SPI_TOKEN_STOP_TRAN;
+ mmc_spi_writebytes(host, 2, tok);
+ for (i = 0; i < WTOUT; i++) { /* wait busy */
+ mmc_spi_readbytes(host, 1, &r1);
+ if (i && r1 == 0xff) {
+ r1 = 0;
+ break;
+ }
+ }
+ if (i == WTOUT) {
+ dev_dbg(host->dev, "%s: wstop %x\n", __func__, r1);
+ r1 = R1_SPI_ERROR;
+ }
+ }
+
+ return r1;
+}
+
+static int mmc_spi_request(struct mci_host *mci, struct mci_cmd *cmd, struct mci_data *data)
+{
+ struct mmc_spi_host *host = to_spi_host(mci);
+ uint8_t r1;
+ int i;
+ int ret = 0;
+
+ dev_dbg(host->dev, "%s : CMD%02d, RESP %s, ARG 0x%X\n", __func__,
+ cmd->cmdidx, maptype(cmd), cmd->cmdarg);
+
+ r1 = mmc_spi_command_send(host, cmd);
+
+ cmd->response[0] = r1;
+
+ if (r1 == 0xff) { /* no response */
+ ret = -ETIME;
+ goto done;
+ } else if (r1 & R1_SPI_COM_CRC) {
+ ret = -ECOMM;
+ goto done;
+ } else if (r1 & ~R1_SPI_IDLE) { /* other errors */
+ ret = -ETIME;
+ goto done;
+ } else if (cmd->resp_type == MMC_RSP_R2) {
+ r1 = mmc_spi_readdata(host, cmd->response, 1, 16);
+ for (i = 0; i < 4; i++)
+ cmd->response[i] = swab32(cmd->response[i]);
+ dev_dbg(host->dev, "MMC_RSP_R2 -> %x %x %x %x\n", cmd->response[0], cmd->response[1],
+ cmd->response[2], cmd->response[3]);
+ } else if (!data) {
+ switch (cmd->cmdidx) {
+ case SD_CMD_SEND_IF_COND:
+ case MMC_CMD_SPI_READ_OCR:
+ mmc_spi_readbytes(host, 4, cmd->response);
+ cmd->response[0] = swab32(cmd->response[0]);
+ break;
+ }
+ } else {
+ if (data->flags == MMC_DATA_READ) {
+ dev_dbg(host->dev, "%s : DATA READ, %x blocks, bsize = 0x%X\n", __func__,
+ data->blocks, data->blocksize);
+ r1 = mmc_spi_readdata(host, data->dest,
+ data->blocks, data->blocksize);
+ } else if (data->flags == MMC_DATA_WRITE) {
+ dev_dbg(host->dev, "%s : DATA WRITE, %x blocks, bsize = 0x%X\n", __func__,
+ data->blocks, data->blocksize);
+ r1 = mmc_spi_writedata(host, data->src,
+ data->blocks, data->blocksize,
+ (cmd->cmdidx == MMC_CMD_WRITE_MULTIPLE_BLOCK));
+ }
+ if (r1 & R1_SPI_COM_CRC)
+ ret = -ECOMM;
+ else if (r1)
+ ret = -ETIME;
+ }
+
+done:
+ mmc_cs_off(host);
+ return ret;
+
+return 0;
+
+}
+
+static void mmc_spi_set_ios(struct mci_host *mci, struct device_d *mci_dev,
+ unsigned bus_width, unsigned clock)
+{
+ struct mmc_spi_host *host = to_spi_host(mci);
+
+ spi_setup(host->spi);
+}
+
+static int mmc_spi_init(struct mci_host *mci, struct device_d *mci_dev)
+{
+ struct mmc_spi_host *host = to_spi_host(mci);
+ mmc_spi_readbytes(host, 10, NULL);
+
+ /*
+ * Do a burst with chipselect active-high. We need to do this to
+ * meet the requirement of 74 clock cycles with both chipselect
+ * and CMD (MOSI) high before CMD0 ... after the card has been
+ * powered up to Vdd(min), and so is ready to take commands.
+ *
+ * Some cards are particularly needy of this (e.g. Viking "SD256")
+ * while most others don't seem to care.
+ *
+ * Note that this is one of the places MMC/SD plays games with the
+ * SPI protocol. Another is that when chipselect is released while
+ * the card returns BUSY status, the clock must issue several cycles
+ * with chipselect high before the card will stop driving its output.
+ */
+
+ host->spi->mode |= SPI_CS_HIGH;
+ if (spi_setup(host->spi) != 0) {
+ /* Just warn; most cards work without it. */
+ dev_warn(&host->spi->dev,
+ "can't change chip-select polarity\n");
+ host->spi->mode &= ~SPI_CS_HIGH;
+ } else {
+ mmc_spi_readbytes(host, 18, NULL);
+
+ host->spi->mode &= ~SPI_CS_HIGH;
+ if (spi_setup(host->spi) != 0) {
+ /* Wot, we can't get the same setup we had before? */
+ dev_err(&host->spi->dev,
+ "can't restore chip-select polarity\n");
+ }
+ }
+
+ return 0;
+}
+
+static int spi_mci_probe(struct device_d *dev)
+{
+ struct spi_device *spi = (struct spi_device *)dev->type_data;
+ struct mmc_spi_host *host;
+ void *ones;
+
+ host = xzalloc(sizeof(*host));
+ host->mci.send_cmd = mmc_spi_request;
+ host->mci.set_ios = mmc_spi_set_ios;
+ host->mci.init = mmc_spi_init;
+
+ host->dev = dev;
+ host->spi = spi;
+ dev->priv = host;
+
+ ones = xmalloc(MMC_SPI_BLOCKSIZE);
+ memset(ones, 0xff, MMC_SPI_BLOCKSIZE);
+
+ host->ones = ones;
+
+ spi_message_init(&host->m_tx);
+ spi_message_init(&host->m_rx);
+
+ spi_message_add_tail(&host->t_tx, &host->m_tx);
+ spi_message_add_tail(&host->t_rx, &host->m_rx);
+
+ host->t_rx.tx_buf = host->ones;
+ host->t_rx.cs_change = 1;
+
+ host->t_tx.cs_change = 1;
+
+ host->mci.voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
+ host->mci.host_caps = MMC_CAP_SPI;
+
+ mci_register(&host->mci);
+
+ return 0;
+}
+
+static struct driver_d spi_mci_driver = {
+ .name = "spi_mci",
+ .probe = spi_mci_probe,
+};
+
+static int spi_mci_init_driver(void)
+{
+ register_driver(&spi_mci_driver);
+ return 0;
+}
+
+device_initcall(spi_mci_init_driver);
diff --git a/include/mci.h b/include/mci.h
index 69cffe8..d581f99 100644
--- a/include/mci.h
+++ b/include/mci.h
@@ -49,6 +49,7 @@
#define MMC_MODE_HS 0x001
#define MMC_MODE_HS_52MHz 0x010
+#define MMC_CAP_SPI 0x020
#define MMC_MODE_4BIT 0x100
#define MMC_MODE_8BIT 0x200
@@ -56,6 +57,12 @@
#define IS_SD(x) (x->version & SD_VERSION_SD)
+#ifdef CONFIG_MCI_SPI
+#define mmc_host_is_spi(host) ((host)->host_caps & MMC_CAP_SPI)
+#else
+#define mmc_host_is_spi(host) 0
+#endif
+
#define MMC_DATA_READ 1
#define MMC_DATA_WRITE 2
@@ -78,6 +85,8 @@
#define MMC_CMD_WRITE_SINGLE_BLOCK 24
#define MMC_CMD_WRITE_MULTIPLE_BLOCK 25
#define MMC_CMD_APP_CMD 55
+#define MMC_CMD_SPI_READ_OCR 58
+#define MMC_CMD_SPI_CRC_ON_OFF 59
#define SD_CMD_SEND_RELATIVE_ADDR 3
#define SD_CMD_SWITCH_FUNC 6
@@ -155,6 +164,15 @@
#define R1_ILLEGAL_COMMAND (1 << 22)
#define R1_APP_CMD (1 << 5)
+#define R1_SPI_IDLE (1 << 0)
+#define R1_SPI_ERASE_RESET (1 << 1)
+#define R1_SPI_ILLEGAL_COMMAND (1 << 2)
+#define R1_SPI_COM_CRC (1 << 3)
+#define R1_SPI_ERASE_SEQ (1 << 4)
+#define R1_SPI_ADDRESS (1 << 5)
+#define R1_SPI_PARAMETER (1 << 6)
+#define R1_SPI_ERROR (1 << 7)
+
/* response types */
#define MMC_RSP_PRESENT (1 << 0)
#define MMC_RSP_136 (1 << 1) /* 136 bit response */
--
1.7.7
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH 3/3] spi/altera_spi: Add cs_change support
2011-11-24 20:46 [PATCH 0/3] Add MCI over SPI support franck.jullien
2011-11-24 20:46 ` [PATCH 1/3] crypto: Add crc7 function franck.jullien
2011-11-24 20:46 ` [PATCH 2/3 v2] mci: Add MCI over SPI support franck.jullien
@ 2011-11-24 20:46 ` franck.jullien
2011-11-25 11:40 ` [PATCH 0/3] Add MCI over SPI support Sascha Hauer
3 siblings, 0 replies; 5+ messages in thread
From: franck.jullien @ 2011-11-24 20:46 UTC (permalink / raw)
To: barebox
From: Franck Jullien <franck.jullien@gmail.com>
The Linux kernel says (spi.h) :
* All SPI transfers start with the relevant chipselect active. Normally
* it stays selected until after the last transfer in a message. Drivers
* can affect the chipselect signal using cs_change.
*
* (i) If the transfer isn't the last one in the message, this flag is
* used to make the chipselect briefly go inactive in the middle of the
* message. Toggling chipselect in this way may be needed to terminate
* a chip command, letting a single spi_message perform all of group of
* chip transactions together.
*
* (ii) When the transfer is the last one in the message, the chip may
* stay selected until the next transfer. On multi-device SPI busses
* with nothing blocking messages going to other devices, this is just
* a performance hint; starting a message to another device deselects
* this one. But in other cases, this can be used to ensure correctness.
* Some devices need protocol transactions to be built from a series of
* spi_message submissions, where the content of one message is
* determined by the results of previous messages and where the whole
* transaction
* ends when the chipselect goes intactive.
In other words, cs_change changes the default chipselect *behavior*.
Support of cs_change is necessary to implement the mci spi driver.
This patch also fix few things:
Passing the bus number to the brand new master device.
Disable chipselect during master->setup.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
---
arch/nios2/include/asm/spi.h | 1 +
drivers/spi/altera_spi.c | 27 ++++++++++++++++++++++++++-
2 files changed, 27 insertions(+), 1 deletions(-)
diff --git a/arch/nios2/include/asm/spi.h b/arch/nios2/include/asm/spi.h
index 4e576b9..6c5740c 100644
--- a/arch/nios2/include/asm/spi.h
+++ b/arch/nios2/include/asm/spi.h
@@ -8,6 +8,7 @@ struct spi_altera_master {
int spi_mode;
int databits;
int speed;
+ int bus_num;
};
struct altera_spi {
diff --git a/drivers/spi/altera_spi.c b/drivers/spi/altera_spi.c
index 4fd82fb..d63dce3 100644
--- a/drivers/spi/altera_spi.c
+++ b/drivers/spi/altera_spi.c
@@ -25,6 +25,9 @@
#include <io.h>
#include <asm/spi.h>
#include <asm/nios2-io.h>
+#include <clock.h>
+
+static void altera_spi_cs_inactive(struct spi_device *spi);
static int altera_spi_setup(struct spi_device *spi)
{
@@ -49,6 +52,8 @@ static int altera_spi_setup(struct spi_device *spi)
return -1;
}
+ altera_spi_cs_inactive(spi);
+
dev_dbg(master->dev, " mode 0x%08x, bits_per_word: %d, speed: %d\n",
spi->mode, spi->bits_per_word, altera_spi->speed);
@@ -167,19 +172,38 @@ static int altera_spi_transfer(struct spi_device *spi, struct spi_message *mesg)
struct altera_spi *altera_spi = container_of(spi->master, struct altera_spi, master);
struct nios_spi *nios_spi = altera_spi->regs;
struct spi_transfer *t;
+ unsigned int cs_change;
+ const int nsecs = 50;
altera_spi_cs_active(spi);
+ cs_change = 0;
+
mesg->actual_length = 0;
list_for_each_entry(t, &mesg->transfers, transfer_list) {
+
+ if (cs_change) {
+ ndelay(nsecs);
+ altera_spi_cs_inactive(spi);
+ ndelay(nsecs);
+ altera_spi_cs_active(spi);
+ }
+
+ cs_change = t->cs_change;
+
mesg->actual_length += altera_spi_do_xfer(spi, t);
+
+ if (cs_change) {
+ altera_spi_cs_active(spi);
+ }
}
/* Wait the end of any pending transfer */
while ((readl(&nios_spi->status) & NIOS_SPI_TMT) == 0);
- altera_spi_cs_inactive(spi);
+ if (!cs_change)
+ altera_spi_cs_inactive(spi);
return 0;
}
@@ -199,6 +223,7 @@ static int altera_spi_probe(struct device_d *dev)
master->setup = altera_spi_setup;
master->transfer = altera_spi_transfer;
master->num_chipselect = pdata->num_chipselect;
+ master->bus_num = pdata->bus_num;
altera_spi->regs = dev_request_mem_region(dev, 0);
altera_spi->databits = pdata->databits;
--
1.7.7
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH 0/3] Add MCI over SPI support
2011-11-24 20:46 [PATCH 0/3] Add MCI over SPI support franck.jullien
` (2 preceding siblings ...)
2011-11-24 20:46 ` [PATCH 3/3] spi/altera_spi: Add cs_change support franck.jullien
@ 2011-11-25 11:40 ` Sascha Hauer
3 siblings, 0 replies; 5+ messages in thread
From: Sascha Hauer @ 2011-11-25 11:40 UTC (permalink / raw)
To: franck.jullien; +Cc: barebox
On Thu, Nov 24, 2011 at 09:46:31PM +0100, franck.jullien@gmail.com wrote:
> From: Franck Jullien <franck.jullien@gmail.com>
>
> This series adds MCI over SPI support to barebox.
>
> It also makes small changes to nios2 in order to get
> this thing to works. As a matter of fact, SPI master
> drivers needs to support cs_change is you want to use
> MCI over SPI.
>
> *** BLURB HERE ***
<blurb> applied to next </blurb>
Sascha
>
> Franck Jullien (3):
> crypto: Add crc7 function
> mci: Add MCI over SPI support
> spi/altera_spi: Add cs_change support
>
> arch/nios2/include/asm/spi.h | 1 +
> crypto/Kconfig | 3 +
> crypto/Makefile | 1 +
> crypto/crc7.c | 63 ++++++
> drivers/mci/Kconfig | 17 ++
> drivers/mci/Makefile | 1 +
> drivers/mci/mci-core.c | 69 +++++--
> drivers/mci/mci_spi.c | 435 ++++++++++++++++++++++++++++++++++++++++++
> drivers/spi/altera_spi.c | 27 +++-
> include/crc7.h | 14 ++
> include/mci.h | 18 ++
> 11 files changed, 632 insertions(+), 17 deletions(-)
> create mode 100644 crypto/crc7.c
> create mode 100644 drivers/mci/mci_spi.c
> create mode 100644 include/crc7.h
>
> --
> 1.7.7
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread