* [PATCH 01/16] armlinux: remove unnecessary include
2011-11-28 22:09 uncompress work Sascha Hauer
@ 2011-11-28 22:09 ` Sascha Hauer
2011-11-28 22:09 ` [PATCH 02/16] arm bootm: " Sascha Hauer
` (14 subsequent siblings)
15 siblings, 0 replies; 21+ messages in thread
From: Sascha Hauer @ 2011-11-28 22:09 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/lib/armlinux.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/arch/arm/lib/armlinux.c b/arch/arm/lib/armlinux.c
index d8ca477..3fe0794 100644
--- a/arch/arm/lib/armlinux.c
+++ b/arch/arm/lib/armlinux.c
@@ -27,7 +27,6 @@
#include <driver.h>
#include <environment.h>
#include <image.h>
-#include <zlib.h>
#include <init.h>
#include <fs.h>
#include <linux/list.h>
--
1.7.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH 02/16] arm bootm: remove unnecessary include
2011-11-28 22:09 uncompress work Sascha Hauer
2011-11-28 22:09 ` [PATCH 01/16] armlinux: remove unnecessary include Sascha Hauer
@ 2011-11-28 22:09 ` Sascha Hauer
2011-11-28 22:09 ` [PATCH 03/16] scripts/mkimage.c: " Sascha Hauer
` (13 subsequent siblings)
15 siblings, 0 replies; 21+ messages in thread
From: Sascha Hauer @ 2011-11-28 22:09 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/lib/bootm.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index 87bf3b3..28518b3 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -4,7 +4,6 @@
#include <driver.h>
#include <environment.h>
#include <image.h>
-#include <zlib.h>
#include <init.h>
#include <fs.h>
#include <linux/list.h>
--
1.7.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH 03/16] scripts/mkimage.c: remove unnecessary include
2011-11-28 22:09 uncompress work Sascha Hauer
2011-11-28 22:09 ` [PATCH 01/16] armlinux: remove unnecessary include Sascha Hauer
2011-11-28 22:09 ` [PATCH 02/16] arm bootm: " Sascha Hauer
@ 2011-11-28 22:09 ` Sascha Hauer
2011-11-28 22:09 ` [PATCH 04/16] use kernel bunzip implementation Sascha Hauer
` (12 subsequent siblings)
15 siblings, 0 replies; 21+ messages in thread
From: Sascha Hauer @ 2011-11-28 22:09 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
scripts/mkimage.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/scripts/mkimage.c b/scripts/mkimage.c
index 3beab91..b219cb8 100644
--- a/scripts/mkimage.c
+++ b/scripts/mkimage.c
@@ -33,7 +33,6 @@
char *cmdname;
-#include "../include/zlib.h"
#include "../crypto/crc32.c"
//extern unsigned long crc32 (unsigned long crc, const char *buf, unsigned int len);
--
1.7.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH 04/16] use kernel bunzip implementation
2011-11-28 22:09 uncompress work Sascha Hauer
` (2 preceding siblings ...)
2011-11-28 22:09 ` [PATCH 03/16] scripts/mkimage.c: " Sascha Hauer
@ 2011-11-28 22:09 ` Sascha Hauer
2011-11-28 22:09 ` [PATCH 05/16] remove old bzlib Sascha Hauer
` (11 subsequent siblings)
15 siblings, 0 replies; 21+ messages in thread
From: Sascha Hauer @ 2011-11-28 22:09 UTC (permalink / raw)
To: barebox
The kernel uncompression functions have a unified API. Switch
to the kernel implementation to unify the different uncompression
APIs. As a bonus the kernel implementation is much smaller.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
commands/bootm.c | 23 +-
include/bunzip2.h | 10 +
lib/Makefile | 2 +-
lib/decompress_bunzip2.c | 756 ++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 779 insertions(+), 12 deletions(-)
create mode 100644 include/bunzip2.h
create mode 100644 lib/decompress_bunzip2.c
diff --git a/commands/bootm.c b/commands/bootm.c
index 731b74d..22b4964 100644
--- a/commands/bootm.c
+++ b/commands/bootm.c
@@ -31,7 +31,6 @@
#include <image.h>
#include <malloc.h>
#include <zlib.h>
-#include <bzlib.h>
#include <environment.h>
#include <asm/byteorder.h>
#include <xfuncs.h>
@@ -42,6 +41,7 @@
#include <boot.h>
#include <rtc.h>
#include <init.h>
+#include <bunzip2.h>
#include <asm-generic/memory_layout.h>
/*
@@ -103,12 +103,18 @@ struct image_handle_data* image_handle_data_get_by_num(struct image_handle* hand
return &handle->data_entries[num];
}
+static void unzip_error(char *x)
+{
+ puts(x);
+}
+
int relocate_image(struct image_handle *handle, void *load_address)
{
image_header_t *hdr = &handle->header;
unsigned long len = image_get_size(hdr);
struct image_handle_data *iha;
unsigned long data;
+ int ret;
#if defined CONFIG_CMD_BOOTM_ZLIB || defined CONFIG_CMD_BOOTM_BZLIB
uint unc_len = CFG_BOOTM_LEN;
@@ -136,16 +142,11 @@ int relocate_image(struct image_handle *handle, void *load_address)
#ifdef CONFIG_CMD_BOOTM_BZLIB
case IH_COMP_BZIP2:
printf (" Uncompressing ... ");
- /*
- * If we've got less than 4 MB of malloc() space,
- * use slower decompression algorithm which requires
- * at most 2300 KB of memory.
- */
- if (BZ2_bzBuffToBuffDecompress (load_address,
- &unc_len, (char *)data, len,
- MALLOC_SIZE < (4096 * 1024), 0)
- != BZ_OK)
- return -1;
+
+ ret = bunzip2((void *)data, len, NULL, NULL, load_address, NULL,
+ unzip_error);
+ if (ret)
+ return ret;
break;
#endif
default:
diff --git a/include/bunzip2.h b/include/bunzip2.h
new file mode 100644
index 0000000..1152721
--- /dev/null
+++ b/include/bunzip2.h
@@ -0,0 +1,10 @@
+#ifndef DECOMPRESS_BUNZIP2_H
+#define DECOMPRESS_BUNZIP2_H
+
+int bunzip2(unsigned char *inbuf, int len,
+ int(*fill)(void*, unsigned int),
+ int(*flush)(void*, unsigned int),
+ unsigned char *output,
+ int *pos,
+ void(*error)(char *x));
+#endif
diff --git a/lib/Makefile b/lib/Makefile
index eccdfff..b02191a 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -15,7 +15,7 @@ obj-y += libgen.o
obj-y += stringlist.o
obj-y += recursive_action.o
obj-y += make_directory.o
-obj-$(CONFIG_BZLIB) += bzlib.o bzlib_crctable.o bzlib_decompress.o bzlib_huffman.o bzlib_randtable.o
+obj-$(CONFIG_BZLIB) += decompress_bunzip2.o
obj-$(CONFIG_ZLIB) += zlib.o gunzip.o
obj-$(CONFIG_CMDLINE_EDITING) += readline.o
obj-$(CONFIG_SIMPLE_READLINE) += readline_simple.o
diff --git a/lib/decompress_bunzip2.c b/lib/decompress_bunzip2.c
new file mode 100644
index 0000000..4b6edd1
--- /dev/null
+++ b/lib/decompress_bunzip2.c
@@ -0,0 +1,756 @@
+/* vi: set sw = 4 ts = 4: */
+/* Small bzip2 deflate implementation, by Rob Landley (rob@landley.net).
+
+ Based on bzip2 decompression code by Julian R Seward (jseward@acm.org),
+ which also acknowledges contributions by Mike Burrows, David Wheeler,
+ Peter Fenwick, Alistair Moffat, Radford Neal, Ian H. Witten,
+ Robert Sedgewick, and Jon L. Bentley.
+
+ This code is licensed under the LGPLv2:
+ LGPL (http://www.gnu.org/copyleft/lgpl.html
+*/
+
+/*
+ Size and speed optimizations by Manuel Novoa III (mjn3@codepoet.org).
+
+ More efficient reading of Huffman codes, a streamlined read_bunzip()
+ function, and various other tweaks. In (limited) tests, approximately
+ 20% faster than bzcat on x86 and about 10% faster on arm.
+
+ Note that about 2/3 of the time is spent in read_unzip() reversing
+ the Burrows-Wheeler transformation. Much of that time is delay
+ resulting from cache misses.
+
+ I would ask that anyone benefiting from this work, especially those
+ using it in commercial products, consider making a donation to my local
+ non-profit hospice organization in the name of the woman I loved, who
+ passed away Feb. 12, 2003.
+
+ In memory of Toni W. Hagan
+
+ Hospice of Acadiana, Inc.
+ 2600 Johnston St., Suite 200
+ Lafayette, LA 70503-3240
+
+ Phone (337) 232-1234 or 1-800-738-2226
+ Fax (337) 232-1297
+
+ http://www.hospiceacadiana.com/
+
+ Manuel
+ */
+
+/*
+ Made it fit for running in Linux Kernel by Alain Knaff (alain@knaff.lu)
+*/
+
+#include <common.h>
+#include <malloc.h>
+
+#ifdef STATIC
+#define PREBOOT
+#else
+#include <bunzip2.h>
+#endif /* STATIC */
+
+#ifndef INT_MAX
+#define INT_MAX 0x7fffffff
+#endif
+
+/* Constants for Huffman coding */
+#define MAX_GROUPS 6
+#define GROUP_SIZE 50 /* 64 would have been more efficient */
+#define MAX_HUFCODE_BITS 20 /* Longest Huffman code allowed */
+#define MAX_SYMBOLS 258 /* 256 literals + RUNA + RUNB */
+#define SYMBOL_RUNA 0
+#define SYMBOL_RUNB 1
+
+/* Status return values */
+#define RETVAL_OK 0
+#define RETVAL_LAST_BLOCK (-1)
+#define RETVAL_NOT_BZIP_DATA (-2)
+#define RETVAL_UNEXPECTED_INPUT_EOF (-3)
+#define RETVAL_UNEXPECTED_OUTPUT_EOF (-4)
+#define RETVAL_DATA_ERROR (-5)
+#define RETVAL_OUT_OF_MEMORY (-6)
+#define RETVAL_OBSOLETE_INPUT (-7)
+
+/* Other housekeeping constants */
+#define BZIP2_IOBUF_SIZE 4096
+
+/* This is what we know about each Huffman coding group */
+struct group_data {
+ /* We have an extra slot at the end of limit[] for a sentinal value. */
+ int limit[MAX_HUFCODE_BITS+1];
+ int base[MAX_HUFCODE_BITS];
+ int permute[MAX_SYMBOLS];
+ int minLen, maxLen;
+};
+
+/* Structure holding all the housekeeping data, including IO buffers and
+ memory that persists between calls to bunzip */
+struct bunzip_data {
+ /* State for interrupting output loop */
+ int writeCopies, writePos, writeRunCountdown, writeCount, writeCurrent;
+ /* I/O tracking data (file handles, buffers, positions, etc.) */
+ int (*fill)(void*, unsigned int);
+ int inbufCount, inbufPos /*, outbufPos*/;
+ unsigned char *inbuf /*,*outbuf*/;
+ unsigned int inbufBitCount, inbufBits;
+ /* The CRC values stored in the block header and calculated from the
+ data */
+ unsigned int crc32Table[256], headerCRC, totalCRC, writeCRC;
+ /* Intermediate buffer and its size (in bytes) */
+ unsigned int *dbuf, dbufSize;
+ /* These things are a bit too big to go on the stack */
+ unsigned char selectors[32768]; /* nSelectors = 15 bits */
+ struct group_data groups[MAX_GROUPS]; /* Huffman coding tables */
+ int io_error; /* non-zero if we have IO error */
+ int byteCount[256];
+ unsigned char symToByte[256], mtfSymbol[256];
+};
+
+
+/* Return the next nnn bits of input. All reads from the compressed input
+ are done through this function. All reads are big endian */
+static unsigned int get_bits(struct bunzip_data *bd, char bits_wanted)
+{
+ unsigned int bits = 0;
+
+ /* If we need to get more data from the byte buffer, do so.
+ (Loop getting one byte at a time to enforce endianness and avoid
+ unaligned access.) */
+ while (bd->inbufBitCount < bits_wanted) {
+ /* If we need to read more data from file into byte buffer, do
+ so */
+ if (bd->inbufPos == bd->inbufCount) {
+ if (bd->io_error)
+ return 0;
+ bd->inbufCount = bd->fill(bd->inbuf, BZIP2_IOBUF_SIZE);
+ if (bd->inbufCount <= 0) {
+ bd->io_error = RETVAL_UNEXPECTED_INPUT_EOF;
+ return 0;
+ }
+ bd->inbufPos = 0;
+ }
+ /* Avoid 32-bit overflow (dump bit buffer to top of output) */
+ if (bd->inbufBitCount >= 24) {
+ bits = bd->inbufBits&((1 << bd->inbufBitCount)-1);
+ bits_wanted -= bd->inbufBitCount;
+ bits <<= bits_wanted;
+ bd->inbufBitCount = 0;
+ }
+ /* Grab next 8 bits of input from buffer. */
+ bd->inbufBits = (bd->inbufBits << 8)|bd->inbuf[bd->inbufPos++];
+ bd->inbufBitCount += 8;
+ }
+ /* Calculate result */
+ bd->inbufBitCount -= bits_wanted;
+ bits |= (bd->inbufBits >> bd->inbufBitCount)&((1 << bits_wanted)-1);
+
+ return bits;
+}
+
+/* Unpacks the next block and sets up for the inverse burrows-wheeler step. */
+
+static int get_next_block(struct bunzip_data *bd)
+{
+ struct group_data *hufGroup = NULL;
+ int *base = NULL;
+ int *limit = NULL;
+ int dbufCount, nextSym, dbufSize, groupCount, selector,
+ i, j, k, t, runPos, symCount, symTotal, nSelectors, *byteCount;
+ unsigned char uc, *symToByte, *mtfSymbol, *selectors;
+ unsigned int *dbuf, origPtr;
+
+ dbuf = bd->dbuf;
+ dbufSize = bd->dbufSize;
+ selectors = bd->selectors;
+ byteCount = bd->byteCount;
+ symToByte = bd->symToByte;
+ mtfSymbol = bd->mtfSymbol;
+
+ /* Read in header signature and CRC, then validate signature.
+ (last block signature means CRC is for whole file, return now) */
+ i = get_bits(bd, 24);
+ j = get_bits(bd, 24);
+ bd->headerCRC = get_bits(bd, 32);
+ if ((i == 0x177245) && (j == 0x385090))
+ return RETVAL_LAST_BLOCK;
+ if ((i != 0x314159) || (j != 0x265359))
+ return RETVAL_NOT_BZIP_DATA;
+ /* We can add support for blockRandomised if anybody complains.
+ There was some code for this in busybox 1.0.0-pre3, but nobody ever
+ noticed that it didn't actually work. */
+ if (get_bits(bd, 1))
+ return RETVAL_OBSOLETE_INPUT;
+ origPtr = get_bits(bd, 24);
+ if (origPtr > dbufSize)
+ return RETVAL_DATA_ERROR;
+ /* mapping table: if some byte values are never used (encoding things
+ like ascii text), the compression code removes the gaps to have fewer
+ symbols to deal with, and writes a sparse bitfield indicating which
+ values were present. We make a translation table to convert the
+ symbols back to the corresponding bytes. */
+ t = get_bits(bd, 16);
+ symTotal = 0;
+ for (i = 0; i < 16; i++) {
+ if (t&(1 << (15-i))) {
+ k = get_bits(bd, 16);
+ for (j = 0; j < 16; j++)
+ if (k&(1 << (15-j)))
+ symToByte[symTotal++] = (16*i)+j;
+ }
+ }
+ /* How many different Huffman coding groups does this block use? */
+ groupCount = get_bits(bd, 3);
+ if (groupCount < 2 || groupCount > MAX_GROUPS)
+ return RETVAL_DATA_ERROR;
+ /* nSelectors: Every GROUP_SIZE many symbols we select a new
+ Huffman coding group. Read in the group selector list,
+ which is stored as MTF encoded bit runs. (MTF = Move To
+ Front, as each value is used it's moved to the start of the
+ list.) */
+ nSelectors = get_bits(bd, 15);
+ if (!nSelectors)
+ return RETVAL_DATA_ERROR;
+ for (i = 0; i < groupCount; i++)
+ mtfSymbol[i] = i;
+ for (i = 0; i < nSelectors; i++) {
+ /* Get next value */
+ for (j = 0; get_bits(bd, 1); j++)
+ if (j >= groupCount)
+ return RETVAL_DATA_ERROR;
+ /* Decode MTF to get the next selector */
+ uc = mtfSymbol[j];
+ for (; j; j--)
+ mtfSymbol[j] = mtfSymbol[j-1];
+ mtfSymbol[0] = selectors[i] = uc;
+ }
+ /* Read the Huffman coding tables for each group, which code
+ for symTotal literal symbols, plus two run symbols (RUNA,
+ RUNB) */
+ symCount = symTotal+2;
+ for (j = 0; j < groupCount; j++) {
+ unsigned char length[MAX_SYMBOLS], temp[MAX_HUFCODE_BITS+1];
+ int minLen, maxLen, pp;
+ /* Read Huffman code lengths for each symbol. They're
+ stored in a way similar to mtf; record a starting
+ value for the first symbol, and an offset from the
+ previous value for everys symbol after that.
+ (Subtracting 1 before the loop and then adding it
+ back at the end is an optimization that makes the
+ test inside the loop simpler: symbol length 0
+ becomes negative, so an unsigned inequality catches
+ it.) */
+ t = get_bits(bd, 5)-1;
+ for (i = 0; i < symCount; i++) {
+ for (;;) {
+ if (((unsigned)t) > (MAX_HUFCODE_BITS-1))
+ return RETVAL_DATA_ERROR;
+
+ /* If first bit is 0, stop. Else
+ second bit indicates whether to
+ increment or decrement the value.
+ Optimization: grab 2 bits and unget
+ the second if the first was 0. */
+
+ k = get_bits(bd, 2);
+ if (k < 2) {
+ bd->inbufBitCount++;
+ break;
+ }
+ /* Add one if second bit 1, else
+ * subtract 1. Avoids if/else */
+ t += (((k+1)&2)-1);
+ }
+ /* Correct for the initial -1, to get the
+ * final symbol length */
+ length[i] = t+1;
+ }
+ /* Find largest and smallest lengths in this group */
+ minLen = maxLen = length[0];
+
+ for (i = 1; i < symCount; i++) {
+ if (length[i] > maxLen)
+ maxLen = length[i];
+ else if (length[i] < minLen)
+ minLen = length[i];
+ }
+
+ /* Calculate permute[], base[], and limit[] tables from
+ * length[].
+ *
+ * permute[] is the lookup table for converting
+ * Huffman coded symbols into decoded symbols. base[]
+ * is the amount to subtract from the value of a
+ * Huffman symbol of a given length when using
+ * permute[].
+ *
+ * limit[] indicates the largest numerical value a
+ * symbol with a given number of bits can have. This
+ * is how the Huffman codes can vary in length: each
+ * code with a value > limit[length] needs another
+ * bit.
+ */
+ hufGroup = bd->groups+j;
+ hufGroup->minLen = minLen;
+ hufGroup->maxLen = maxLen;
+ /* Note that minLen can't be smaller than 1, so we
+ adjust the base and limit array pointers so we're
+ not always wasting the first entry. We do this
+ again when using them (during symbol decoding).*/
+ base = hufGroup->base-1;
+ limit = hufGroup->limit-1;
+ /* Calculate permute[]. Concurrently, initialize
+ * temp[] and limit[]. */
+ pp = 0;
+ for (i = minLen; i <= maxLen; i++) {
+ temp[i] = limit[i] = 0;
+ for (t = 0; t < symCount; t++)
+ if (length[t] == i)
+ hufGroup->permute[pp++] = t;
+ }
+ /* Count symbols coded for at each bit length */
+ for (i = 0; i < symCount; i++)
+ temp[length[i]]++;
+ /* Calculate limit[] (the largest symbol-coding value
+ *at each bit length, which is (previous limit <<
+ *1)+symbols at this level), and base[] (number of
+ *symbols to ignore at each bit length, which is limit
+ *minus the cumulative count of symbols coded for
+ *already). */
+ pp = t = 0;
+ for (i = minLen; i < maxLen; i++) {
+ pp += temp[i];
+ /* We read the largest possible symbol size
+ and then unget bits after determining how
+ many we need, and those extra bits could be
+ set to anything. (They're noise from
+ future symbols.) At each level we're
+ really only interested in the first few
+ bits, so here we set all the trailing
+ to-be-ignored bits to 1 so they don't
+ affect the value > limit[length]
+ comparison. */
+ limit[i] = (pp << (maxLen - i)) - 1;
+ pp <<= 1;
+ base[i+1] = pp-(t += temp[i]);
+ }
+ limit[maxLen+1] = INT_MAX; /* Sentinal value for
+ * reading next sym. */
+ limit[maxLen] = pp+temp[maxLen]-1;
+ base[minLen] = 0;
+ }
+ /* We've finished reading and digesting the block header. Now
+ read this block's Huffman coded symbols from the file and
+ undo the Huffman coding and run length encoding, saving the
+ result into dbuf[dbufCount++] = uc */
+
+ /* Initialize symbol occurrence counters and symbol Move To
+ * Front table */
+ for (i = 0; i < 256; i++) {
+ byteCount[i] = 0;
+ mtfSymbol[i] = (unsigned char)i;
+ }
+ /* Loop through compressed symbols. */
+ runPos = dbufCount = symCount = selector = 0;
+ for (;;) {
+ /* Determine which Huffman coding group to use. */
+ if (!(symCount--)) {
+ symCount = GROUP_SIZE-1;
+ if (selector >= nSelectors)
+ return RETVAL_DATA_ERROR;
+ hufGroup = bd->groups+selectors[selector++];
+ base = hufGroup->base-1;
+ limit = hufGroup->limit-1;
+ }
+ /* Read next Huffman-coded symbol. */
+ /* Note: It is far cheaper to read maxLen bits and
+ back up than it is to read minLen bits and then an
+ additional bit at a time, testing as we go.
+ Because there is a trailing last block (with file
+ CRC), there is no danger of the overread causing an
+ unexpected EOF for a valid compressed file. As a
+ further optimization, we do the read inline
+ (falling back to a call to get_bits if the buffer
+ runs dry). The following (up to got_huff_bits:) is
+ equivalent to j = get_bits(bd, hufGroup->maxLen);
+ */
+ while (bd->inbufBitCount < hufGroup->maxLen) {
+ if (bd->inbufPos == bd->inbufCount) {
+ j = get_bits(bd, hufGroup->maxLen);
+ goto got_huff_bits;
+ }
+ bd->inbufBits =
+ (bd->inbufBits << 8)|bd->inbuf[bd->inbufPos++];
+ bd->inbufBitCount += 8;
+ };
+ bd->inbufBitCount -= hufGroup->maxLen;
+ j = (bd->inbufBits >> bd->inbufBitCount)&
+ ((1 << hufGroup->maxLen)-1);
+got_huff_bits:
+ /* Figure how how many bits are in next symbol and
+ * unget extras */
+ i = hufGroup->minLen;
+ while (j > limit[i])
+ ++i;
+ bd->inbufBitCount += (hufGroup->maxLen - i);
+ /* Huffman decode value to get nextSym (with bounds checking) */
+ if ((i > hufGroup->maxLen)
+ || (((unsigned)(j = (j>>(hufGroup->maxLen-i))-base[i]))
+ >= MAX_SYMBOLS))
+ return RETVAL_DATA_ERROR;
+ nextSym = hufGroup->permute[j];
+ /* We have now decoded the symbol, which indicates
+ either a new literal byte, or a repeated run of the
+ most recent literal byte. First, check if nextSym
+ indicates a repeated run, and if so loop collecting
+ how many times to repeat the last literal. */
+ if (((unsigned)nextSym) <= SYMBOL_RUNB) { /* RUNA or RUNB */
+ /* If this is the start of a new run, zero out
+ * counter */
+ if (!runPos) {
+ runPos = 1;
+ t = 0;
+ }
+ /* Neat trick that saves 1 symbol: instead of
+ or-ing 0 or 1 at each bit position, add 1
+ or 2 instead. For example, 1011 is 1 << 0
+ + 1 << 1 + 2 << 2. 1010 is 2 << 0 + 2 << 1
+ + 1 << 2. You can make any bit pattern
+ that way using 1 less symbol than the basic
+ or 0/1 method (except all bits 0, which
+ would use no symbols, but a run of length 0
+ doesn't mean anything in this context).
+ Thus space is saved. */
+ t += (runPos << nextSym);
+ /* +runPos if RUNA; +2*runPos if RUNB */
+
+ runPos <<= 1;
+ continue;
+ }
+ /* When we hit the first non-run symbol after a run,
+ we now know how many times to repeat the last
+ literal, so append that many copies to our buffer
+ of decoded symbols (dbuf) now. (The last literal
+ used is the one at the head of the mtfSymbol
+ array.) */
+ if (runPos) {
+ runPos = 0;
+ if (dbufCount+t >= dbufSize)
+ return RETVAL_DATA_ERROR;
+
+ uc = symToByte[mtfSymbol[0]];
+ byteCount[uc] += t;
+ while (t--)
+ dbuf[dbufCount++] = uc;
+ }
+ /* Is this the terminating symbol? */
+ if (nextSym > symTotal)
+ break;
+ /* At this point, nextSym indicates a new literal
+ character. Subtract one to get the position in the
+ MTF array at which this literal is currently to be
+ found. (Note that the result can't be -1 or 0,
+ because 0 and 1 are RUNA and RUNB. But another
+ instance of the first symbol in the mtf array,
+ position 0, would have been handled as part of a
+ run above. Therefore 1 unused mtf position minus 2
+ non-literal nextSym values equals -1.) */
+ if (dbufCount >= dbufSize)
+ return RETVAL_DATA_ERROR;
+ i = nextSym - 1;
+ uc = mtfSymbol[i];
+ /* Adjust the MTF array. Since we typically expect to
+ *move only a small number of symbols, and are bound
+ *by 256 in any case, using memmove here would
+ *typically be bigger and slower due to function call
+ *overhead and other assorted setup costs. */
+ do {
+ mtfSymbol[i] = mtfSymbol[i-1];
+ } while (--i);
+ mtfSymbol[0] = uc;
+ uc = symToByte[uc];
+ /* We have our literal byte. Save it into dbuf. */
+ byteCount[uc]++;
+ dbuf[dbufCount++] = (unsigned int)uc;
+ }
+ /* At this point, we've read all the Huffman-coded symbols
+ (and repeated runs) for this block from the input stream,
+ and decoded them into the intermediate buffer. There are
+ dbufCount many decoded bytes in dbuf[]. Now undo the
+ Burrows-Wheeler transform on dbuf. See
+ http://dogma.net/markn/articles/bwt/bwt.htm
+ */
+ /* Turn byteCount into cumulative occurrence counts of 0 to n-1. */
+ j = 0;
+ for (i = 0; i < 256; i++) {
+ k = j+byteCount[i];
+ byteCount[i] = j;
+ j = k;
+ }
+ /* Figure out what order dbuf would be in if we sorted it. */
+ for (i = 0; i < dbufCount; i++) {
+ uc = (unsigned char)(dbuf[i] & 0xff);
+ dbuf[byteCount[uc]] |= (i << 8);
+ byteCount[uc]++;
+ }
+ /* Decode first byte by hand to initialize "previous" byte.
+ Note that it doesn't get output, and if the first three
+ characters are identical it doesn't qualify as a run (hence
+ writeRunCountdown = 5). */
+ if (dbufCount) {
+ if (origPtr >= dbufCount)
+ return RETVAL_DATA_ERROR;
+ bd->writePos = dbuf[origPtr];
+ bd->writeCurrent = (unsigned char)(bd->writePos&0xff);
+ bd->writePos >>= 8;
+ bd->writeRunCountdown = 5;
+ }
+ bd->writeCount = dbufCount;
+
+ return RETVAL_OK;
+}
+
+/* Undo burrows-wheeler transform on intermediate buffer to produce output.
+ If start_bunzip was initialized with out_fd =-1, then up to len bytes of
+ data are written to outbuf. Return value is number of bytes written or
+ error (all errors are negative numbers). If out_fd!=-1, outbuf and len
+ are ignored, data is written to out_fd and return is RETVAL_OK or error.
+*/
+
+static int read_bunzip(struct bunzip_data *bd, char *outbuf, int len)
+{
+ const unsigned int *dbuf;
+ int pos, xcurrent, previous, gotcount;
+
+ /* If last read was short due to end of file, return last block now */
+ if (bd->writeCount < 0)
+ return bd->writeCount;
+
+ gotcount = 0;
+ dbuf = bd->dbuf;
+ pos = bd->writePos;
+ xcurrent = bd->writeCurrent;
+
+ /* We will always have pending decoded data to write into the output
+ buffer unless this is the very first call (in which case we haven't
+ Huffman-decoded a block into the intermediate buffer yet). */
+
+ if (bd->writeCopies) {
+ /* Inside the loop, writeCopies means extra copies (beyond 1) */
+ --bd->writeCopies;
+ /* Loop outputting bytes */
+ for (;;) {
+ /* If the output buffer is full, snapshot
+ * state and return */
+ if (gotcount >= len) {
+ bd->writePos = pos;
+ bd->writeCurrent = xcurrent;
+ bd->writeCopies++;
+ return len;
+ }
+ /* Write next byte into output buffer, updating CRC */
+ outbuf[gotcount++] = xcurrent;
+ bd->writeCRC = (((bd->writeCRC) << 8)
+ ^bd->crc32Table[((bd->writeCRC) >> 24)
+ ^xcurrent]);
+ /* Loop now if we're outputting multiple
+ * copies of this byte */
+ if (bd->writeCopies) {
+ --bd->writeCopies;
+ continue;
+ }
+decode_next_byte:
+ if (!bd->writeCount--)
+ break;
+ /* Follow sequence vector to undo
+ * Burrows-Wheeler transform */
+ previous = xcurrent;
+ pos = dbuf[pos];
+ xcurrent = pos&0xff;
+ pos >>= 8;
+ /* After 3 consecutive copies of the same
+ byte, the 4th is a repeat count. We count
+ down from 4 instead *of counting up because
+ testing for non-zero is faster */
+ if (--bd->writeRunCountdown) {
+ if (xcurrent != previous)
+ bd->writeRunCountdown = 4;
+ } else {
+ /* We have a repeated run, this byte
+ * indicates the count */
+ bd->writeCopies = xcurrent;
+ xcurrent = previous;
+ bd->writeRunCountdown = 5;
+ /* Sometimes there are just 3 bytes
+ * (run length 0) */
+ if (!bd->writeCopies)
+ goto decode_next_byte;
+ /* Subtract the 1 copy we'd output
+ * anyway to get extras */
+ --bd->writeCopies;
+ }
+ }
+ /* Decompression of this block completed successfully */
+ bd->writeCRC = ~bd->writeCRC;
+ bd->totalCRC = ((bd->totalCRC << 1) |
+ (bd->totalCRC >> 31)) ^ bd->writeCRC;
+ /* If this block had a CRC error, force file level CRC error. */
+ if (bd->writeCRC != bd->headerCRC) {
+ bd->totalCRC = bd->headerCRC+1;
+ return RETVAL_LAST_BLOCK;
+ }
+ }
+
+ /* Refill the intermediate buffer by Huffman-decoding next
+ * block of input */
+ /* (previous is just a convenient unused temp variable here) */
+ previous = get_next_block(bd);
+ if (previous) {
+ bd->writeCount = previous;
+ return (previous != RETVAL_LAST_BLOCK) ? previous : gotcount;
+ }
+ bd->writeCRC = 0xffffffffUL;
+ pos = bd->writePos;
+ xcurrent = bd->writeCurrent;
+ goto decode_next_byte;
+}
+
+static int nofill(void *buf, unsigned int len)
+{
+ return -1;
+}
+
+/* Allocate the structure, read file header. If in_fd ==-1, inbuf must contain
+ a complete bunzip file (len bytes long). If in_fd!=-1, inbuf and len are
+ ignored, and data is read from file handle into temporary buffer. */
+static int start_bunzip(struct bunzip_data **bdp, void *inbuf, int len,
+ int (*fill)(void*, unsigned int))
+{
+ struct bunzip_data *bd;
+ unsigned int i, j, c;
+ const unsigned int BZh0 =
+ (((unsigned int)'B') << 24)+(((unsigned int)'Z') << 16)
+ +(((unsigned int)'h') << 8)+(unsigned int)'0';
+
+ /* Figure out how much data to allocate */
+ i = sizeof(struct bunzip_data);
+
+ /* Allocate bunzip_data. Most fields initialize to zero. */
+ bd = *bdp = malloc(i);
+ if (!bd)
+ return RETVAL_OUT_OF_MEMORY;
+ memset(bd, 0, sizeof(struct bunzip_data));
+ /* Setup input buffer */
+ bd->inbuf = inbuf;
+ bd->inbufCount = len;
+ if (fill != NULL)
+ bd->fill = fill;
+ else
+ bd->fill = nofill;
+
+ /* Init the CRC32 table (big endian) */
+ for (i = 0; i < 256; i++) {
+ c = i << 24;
+ for (j = 8; j; j--)
+ c = c&0x80000000 ? (c << 1)^0x04c11db7 : (c << 1);
+ bd->crc32Table[i] = c;
+ }
+
+ /* Ensure that file starts with "BZh['1'-'9']." */
+ i = get_bits(bd, 32);
+ if (((unsigned int)(i-BZh0-1)) >= 9)
+ return RETVAL_NOT_BZIP_DATA;
+
+ /* Fourth byte (ascii '1'-'9'), indicates block size in units of 100k of
+ uncompressed data. Allocate intermediate buffer for block. */
+ bd->dbufSize = 100000*(i-BZh0);
+
+ bd->dbuf = malloc(bd->dbufSize * sizeof(int));
+ if (!bd->dbuf)
+ return RETVAL_OUT_OF_MEMORY;
+ return RETVAL_OK;
+}
+
+/* Example usage: decompress src_fd to dst_fd. (Stops at end of bzip2 data,
+ not end of file.) */
+int bunzip2(unsigned char *buf, int len,
+ int(*fill)(void*, unsigned int),
+ int(*flush)(void*, unsigned int),
+ unsigned char *outbuf,
+ int *pos,
+ void(*error)(char *x))
+{
+ struct bunzip_data *bd;
+ int i = -1;
+ unsigned char *inbuf;
+
+ if (flush)
+ outbuf = malloc(BZIP2_IOBUF_SIZE);
+
+ if (!outbuf) {
+ error("Could not allocate output bufer");
+ return RETVAL_OUT_OF_MEMORY;
+ }
+ if (buf)
+ inbuf = buf;
+ else
+ inbuf = malloc(BZIP2_IOBUF_SIZE);
+ if (!inbuf) {
+ error("Could not allocate input bufer");
+ i = RETVAL_OUT_OF_MEMORY;
+ goto exit_0;
+ }
+ i = start_bunzip(&bd, inbuf, len, fill);
+ if (!i) {
+ for (;;) {
+ i = read_bunzip(bd, outbuf, BZIP2_IOBUF_SIZE);
+ if (i <= 0)
+ break;
+ if (!flush)
+ outbuf += i;
+ else
+ if (i != flush(outbuf, i)) {
+ i = RETVAL_UNEXPECTED_OUTPUT_EOF;
+ break;
+ }
+ }
+ }
+ /* Check CRC and release memory */
+ if (i == RETVAL_LAST_BLOCK) {
+ if (bd->headerCRC != bd->totalCRC)
+ error("Data integrity error when decompressing.");
+ else
+ i = RETVAL_OK;
+ } else if (i == RETVAL_UNEXPECTED_OUTPUT_EOF) {
+ error("Compressed file ends unexpectedly");
+ }
+ if (!bd)
+ goto exit_1;
+ if (bd->dbuf)
+ free(bd->dbuf);
+ if (pos)
+ *pos = bd->inbufPos;
+ free(bd);
+exit_1:
+ if (!buf)
+ free(inbuf);
+exit_0:
+ if (flush)
+ free(outbuf);
+ return i;
+}
+
+#ifdef PREBOOT
+STATIC int INIT decompress(unsigned char *buf, int len,
+ int(*fill)(void*, unsigned int),
+ int(*flush)(void*, unsigned int),
+ unsigned char *outbuf,
+ int *pos,
+ void(*error)(char *x))
+{
+ return bunzip2(buf, len - 4, fill, flush, outbuf, pos, error);
+}
+#endif
--
1.7.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH 05/16] remove old bzlib
2011-11-28 22:09 uncompress work Sascha Hauer
` (3 preceding siblings ...)
2011-11-28 22:09 ` [PATCH 04/16] use kernel bunzip implementation Sascha Hauer
@ 2011-11-28 22:09 ` Sascha Hauer
2011-11-28 22:09 ` [PATCH 06/16] add kernel gunzip implementation Sascha Hauer
` (10 subsequent siblings)
15 siblings, 0 replies; 21+ messages in thread
From: Sascha Hauer @ 2011-11-28 22:09 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
include/bzlib.h | 329 ----------
lib/bzlib.c | 1592 ------------------------------------------------
lib/bzlib_crctable.c | 145 -----
lib/bzlib_decompress.c | 674 --------------------
lib/bzlib_huffman.c | 229 -------
lib/bzlib_randtable.c | 126 ----
6 files changed, 0 insertions(+), 3095 deletions(-)
delete mode 100644 include/bzlib.h
delete mode 100644 lib/bzlib.c
delete mode 100644 lib/bzlib_crctable.c
delete mode 100644 lib/bzlib_decompress.c
delete mode 100644 lib/bzlib_huffman.c
delete mode 100644 lib/bzlib_randtable.c
diff --git a/include/bzlib.h b/include/bzlib.h
deleted file mode 100644
index 4b0f820..0000000
--- a/include/bzlib.h
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * This file is a modified version of bzlib.h from the bzip2-1.0.2
- * distribution which can be found at http://sources.redhat.com/bzip2/
- */
-
-/*-------------------------------------------------------------*/
-/*--- Public header file for the library. ---*/
-/*--- bzlib.h ---*/
-/*-------------------------------------------------------------*/
-
-/*--
- This file is a part of bzip2 and/or libbzip2, a program and
- library for lossless, block-sorting data compression.
-
- Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- 2. The origin of this software must not be misrepresented; you must
- not claim that you wrote the original software. If you use this
- software in a product, an acknowledgment in the product
- documentation would be appreciated but is not required.
-
- 3. Altered source versions must be plainly marked as such, and must
- not be misrepresented as being the original software.
-
- 4. The name of the author may not be used to endorse or promote
- products derived from this software without specific prior written
- permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- Julian Seward, Cambridge, UK.
- jseward@acm.org
- bzip2/libbzip2 version 1.0 of 21 March 2000
-
- This program is based on (at least) the work of:
- Mike Burrows
- David Wheeler
- Peter Fenwick
- Alistair Moffat
- Radford Neal
- Ian H. Witten
- Robert Sedgewick
- Jon L. Bentley
-
- For more information on these sources, see the manual.
---*/
-
-
-#ifndef _BZLIB_H
-#define _BZLIB_H
-
-/* Configure for barebox environment */
-#define BZ_NO_STDIO
-#define BZ_NO_COMPRESS
-/* End of configuration for barebox environment */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define BZ_RUN 0
-#define BZ_FLUSH 1
-#define BZ_FINISH 2
-
-#define BZ_OK 0
-#define BZ_RUN_OK 1
-#define BZ_FLUSH_OK 2
-#define BZ_FINISH_OK 3
-#define BZ_STREAM_END 4
-#define BZ_SEQUENCE_ERROR (-1)
-#define BZ_PARAM_ERROR (-2)
-#define BZ_MEM_ERROR (-3)
-#define BZ_DATA_ERROR (-4)
-#define BZ_DATA_ERROR_MAGIC (-5)
-#define BZ_IO_ERROR (-6)
-#define BZ_UNEXPECTED_EOF (-7)
-#define BZ_OUTBUFF_FULL (-8)
-#define BZ_CONFIG_ERROR (-9)
-
-typedef
- struct {
- char *next_in;
- unsigned int avail_in;
- unsigned int total_in_lo32;
- unsigned int total_in_hi32;
-
- char *next_out;
- unsigned int avail_out;
- unsigned int total_out_lo32;
- unsigned int total_out_hi32;
-
- void *state;
-
- void *(*bzalloc)(void *,int,int);
- void (*bzfree)(void *,void *);
- void *opaque;
- }
- bz_stream;
-
-
-#ifndef BZ_IMPORT
-#define BZ_EXPORT
-#endif
-
-#ifdef _WIN32
-# include <windows.h>
-# ifdef small
- /* windows.h define small to char */
-# undef small
-# endif
-# ifdef BZ_EXPORT
-# define BZ_API(func) WINAPI func
-# define BZ_EXTERN extern
-# else
- /* import windows dll dynamically */
-# define BZ_API(func) (WINAPI * func)
-# define BZ_EXTERN
-# endif
-#else
-# define BZ_API(func) func
-# define BZ_EXTERN extern
-#endif
-
-
-/*-- Core (low-level) library functions --*/
-
-BZ_EXTERN int BZ_API(BZ2_bzCompressInit) (
- bz_stream* strm,
- int blockSize100k,
- int verbosity,
- int workFactor
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzCompress) (
- bz_stream* strm,
- int action
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzCompressEnd) (
- bz_stream* strm
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzDecompressInit) (
- bz_stream *strm,
- int verbosity,
- int small
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzDecompress) (
- bz_stream* strm
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzDecompressEnd) (
- bz_stream *strm
- );
-
-
-/*-- High(er) level library functions --*/
-
-#ifndef BZ_NO_STDIO
-#define BZ_MAX_UNUSED 5000
-
-/* Need a definitition for FILE */
-#include <stdio.h>
-
-typedef void BZFILE;
-
-BZ_EXTERN BZFILE* BZ_API(BZ2_bzReadOpen) (
- int* bzerror,
- FILE* f,
- int verbosity,
- int small,
- void* unused,
- int nUnused
- );
-
-BZ_EXTERN void BZ_API(BZ2_bzReadClose) (
- int* bzerror,
- BZFILE* b
- );
-
-BZ_EXTERN void BZ_API(BZ2_bzReadGetUnused) (
- int* bzerror,
- BZFILE* b,
- void** unused,
- int* nUnused
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzRead) (
- int* bzerror,
- BZFILE* b,
- void* buf,
- int len
- );
-
-BZ_EXTERN BZFILE* BZ_API(BZ2_bzWriteOpen) (
- int* bzerror,
- FILE* f,
- int blockSize100k,
- int verbosity,
- int workFactor
- );
-
-BZ_EXTERN void BZ_API(BZ2_bzWrite) (
- int* bzerror,
- BZFILE* b,
- void* buf,
- int len
- );
-
-BZ_EXTERN void BZ_API(BZ2_bzWriteClose) (
- int* bzerror,
- BZFILE* b,
- int abandon,
- unsigned int* nbytes_in,
- unsigned int* nbytes_out
- );
-
-BZ_EXTERN void BZ_API(BZ2_bzWriteClose64) (
- int* bzerror,
- BZFILE* b,
- int abandon,
- unsigned int* nbytes_in_lo32,
- unsigned int* nbytes_in_hi32,
- unsigned int* nbytes_out_lo32,
- unsigned int* nbytes_out_hi32
- );
-#endif
-
-
-/*-- Utility functions --*/
-
-BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffCompress) (
- char* dest,
- unsigned int* destLen,
- char* source,
- unsigned int sourceLen,
- int blockSize100k,
- int verbosity,
- int workFactor
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffDecompress) (
- char* dest,
- unsigned int* destLen,
- char* source,
- unsigned int sourceLen,
- int small,
- int verbosity
- );
-
-
-/*--
- Code contributed by Yoshioka Tsuneo
- (QWF00133@niftyserve.or.jp/tsuneo-y@is.aist-nara.ac.jp),
- to support better zlib compatibility.
- This code is not _officially_ part of libbzip2 (yet);
- I haven't tested it, documented it, or considered the
- threading-safeness of it.
- If this code breaks, please contact both Yoshioka and me.
---*/
-
-BZ_EXTERN const char * BZ_API(BZ2_bzlibVersion) (
- void
- );
-
-#ifndef BZ_NO_STDIO
-BZ_EXTERN BZFILE * BZ_API(BZ2_bzopen) (
- const char *path,
- const char *mode
- );
-
-BZ_EXTERN BZFILE * BZ_API(BZ2_bzdopen) (
- int fd,
- const char *mode
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzread) (
- BZFILE* b,
- void* buf,
- int len
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzwrite) (
- BZFILE* b,
- void* buf,
- int len
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzflush) (
- BZFILE* b
- );
-
-BZ_EXTERN void BZ_API(BZ2_bzclose) (
- BZFILE* b
- );
-
-BZ_EXTERN const char * BZ_API(BZ2_bzerror) (
- BZFILE *b,
- int *errnum
- );
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
-/*-------------------------------------------------------------*/
-/*--- end bzlib.h ---*/
-/*-------------------------------------------------------------*/
diff --git a/lib/bzlib.c b/lib/bzlib.c
deleted file mode 100644
index 4c928ca..0000000
--- a/lib/bzlib.c
+++ /dev/null
@@ -1,1592 +0,0 @@
-#include <config.h>
-#include <common.h>
-#include <watchdog.h>
-
-/*
- * This file is a modified version of bzlib.c from the bzip2-1.0.2
- * distribution which can be found at http://sources.redhat.com/bzip2/
- */
-
-/*-------------------------------------------------------------*/
-/*--- Library top-level functions. ---*/
-/*--- bzlib.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
- This file is a part of bzip2 and/or libbzip2, a program and
- library for lossless, block-sorting data compression.
-
- Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- 2. The origin of this software must not be misrepresented; you must
- not claim that you wrote the original software. If you use this
- software in a product, an acknowledgment in the product
- documentation would be appreciated but is not required.
-
- 3. Altered source versions must be plainly marked as such, and must
- not be misrepresented as being the original software.
-
- 4. The name of the author may not be used to endorse or promote
- products derived from this software without specific prior written
- permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- Julian Seward, Cambridge, UK.
- jseward@acm.org
- bzip2/libbzip2 version 1.0 of 21 March 2000
-
- This program is based on (at least) the work of:
- Mike Burrows
- David Wheeler
- Peter Fenwick
- Alistair Moffat
- Radford Neal
- Ian H. Witten
- Robert Sedgewick
- Jon L. Bentley
-
- For more information on these sources, see the manual.
---*/
-
-/*--
- CHANGES
- ~~~~~~~
- 0.9.0 -- original version.
-
- 0.9.0a/b -- no changes in this file.
-
- 0.9.0c
- * made zero-length BZ_FLUSH work correctly in bzCompress().
- * fixed bzWrite/bzRead to ignore zero-length requests.
- * fixed bzread to correctly handle read requests after EOF.
- * wrong parameter order in call to bzDecompressInit in
- bzBuffToBuffDecompress. Fixed.
---*/
-
-#include "bzlib_private.h"
-
-/*---------------------------------------------------*/
-/*--- Compression stuff ---*/
-/*---------------------------------------------------*/
-
-
-/*---------------------------------------------------*/
-#ifndef BZ_NO_STDIO
-void BZ2_bz__AssertH__fail ( int errcode )
-{
- fprintf(stderr,
- "\n\nbzip2/libbzip2: internal error number %d.\n"
- "This is a bug in bzip2/libbzip2, %s.\n"
- "Please report it to me at: jseward@acm.org. If this happened\n"
- "when you were using some program which uses libbzip2 as a\n"
- "component, you should also report this bug to the author(s)\n"
- "of that program. Please make an effort to report this bug;\n"
- "timely and accurate bug reports eventually lead to higher\n"
- "quality software. Thanks. Julian Seward, 30 December 2001.\n\n",
- errcode,
- BZ2_bzlibVersion()
- );
-
- if (errcode == 1007) {
- fprintf(stderr,
- "\n*** A special note about internal error number 1007 ***\n"
- "\n"
- "Experience suggests that a common cause of i.e. 1007\n"
- "is unreliable memory or other hardware. The 1007 assertion\n"
- "just happens to cross-check the results of huge numbers of\n"
- "memory reads/writes, and so acts (unintendedly) as a stress\n"
- "test of your memory system.\n"
- "\n"
- "I suggest the following: try compressing the file again,\n"
- "possibly monitoring progress in detail with the -vv flag.\n"
- "\n"
- "* If the error cannot be reproduced, and/or happens at different\n"
- " points in compression, you may have a flaky memory system.\n"
- " Try a memory-test program. I have used Memtest86\n"
- " (www.memtest86.com). At the time of writing it is free (GPLd).\n"
- " Memtest86 tests memory much more thorougly than your BIOSs\n"
- " power-on test, and may find failures that the BIOS doesn't.\n"
- "\n"
- "* If the error can be repeatably reproduced, this is a bug in\n"
- " bzip2, and I would very much like to hear about it. Please\n"
- " let me know, and, ideally, save a copy of the file causing the\n"
- " problem -- without which I will be unable to investigate it.\n"
- "\n"
- );
- }
-
- exit(3);
-}
-#endif
-
-
-/*---------------------------------------------------*/
-static
-int bz_config_ok ( void )
-{
- if (sizeof(int) != 4) return 0;
- if (sizeof(short) != 2) return 0;
- if (sizeof(char) != 1) return 0;
- return 1;
-}
-
-
-/*---------------------------------------------------*/
-static
-void* default_bzalloc ( void* opaque, Int32 items, Int32 size )
-{
- void* v = malloc ( items * size );
- return v;
-}
-
-static
-void default_bzfree ( void* opaque, void* addr )
-{
- if (addr != NULL) free ( addr );
-}
-
-#ifndef BZ_NO_COMPRESS
-/*---------------------------------------------------*/
-static
-void prepare_new_block ( EState* s )
-{
- Int32 i;
- s->nblock = 0;
- s->numZ = 0;
- s->state_out_pos = 0;
- BZ_INITIALISE_CRC ( s->blockCRC );
- for (i = 0; i < 256; i++) s->inUse[i] = False;
- s->blockNo++;
-}
-
-
-/*---------------------------------------------------*/
-static
-void init_RL ( EState* s )
-{
- s->state_in_ch = 256;
- s->state_in_len = 0;
-}
-
-
-static
-Bool isempty_RL ( EState* s )
-{
- if (s->state_in_ch < 256 && s->state_in_len > 0)
- return False; else
- return True;
-}
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzCompressInit)
- ( bz_stream* strm,
- int blockSize100k,
- int verbosity,
- int workFactor )
-{
- Int32 n;
- EState* s;
-
- if (!bz_config_ok()) return BZ_CONFIG_ERROR;
-
- if (strm == NULL ||
- blockSize100k < 1 || blockSize100k > 9 ||
- workFactor < 0 || workFactor > 250)
- return BZ_PARAM_ERROR;
-
- if (workFactor == 0) workFactor = 30;
- if (strm->bzalloc == NULL) strm->bzalloc = default_bzalloc;
- if (strm->bzfree == NULL) strm->bzfree = default_bzfree;
-
- s = BZALLOC( sizeof(EState) );
- if (s == NULL) return BZ_MEM_ERROR;
- s->strm = strm;
-
- s->arr1 = NULL;
- s->arr2 = NULL;
- s->ftab = NULL;
-
- n = 100000 * blockSize100k;
- s->arr1 = BZALLOC( n * sizeof(UInt32) );
- s->arr2 = BZALLOC( (n+BZ_N_OVERSHOOT) * sizeof(UInt32) );
- s->ftab = BZALLOC( 65537 * sizeof(UInt32) );
-
- if (s->arr1 == NULL || s->arr2 == NULL || s->ftab == NULL) {
- if (s->arr1 != NULL) BZFREE(s->arr1);
- if (s->arr2 != NULL) BZFREE(s->arr2);
- if (s->ftab != NULL) BZFREE(s->ftab);
- if (s != NULL) BZFREE(s);
- return BZ_MEM_ERROR;
- }
-
- s->blockNo = 0;
- s->state = BZ_S_INPUT;
- s->mode = BZ_M_RUNNING;
- s->combinedCRC = 0;
- s->blockSize100k = blockSize100k;
- s->nblockMAX = 100000 * blockSize100k - 19;
- s->verbosity = verbosity;
- s->workFactor = workFactor;
-
- s->block = (UChar*)s->arr2;
- s->mtfv = (UInt16*)s->arr1;
- s->zbits = NULL;
- s->ptr = (UInt32*)s->arr1;
-
- strm->state = s;
- strm->total_in_lo32 = 0;
- strm->total_in_hi32 = 0;
- strm->total_out_lo32 = 0;
- strm->total_out_hi32 = 0;
- init_RL ( s );
- prepare_new_block ( s );
- return BZ_OK;
-}
-
-
-/*---------------------------------------------------*/
-static
-void add_pair_to_block ( EState* s )
-{
- Int32 i;
- UChar ch = (UChar)(s->state_in_ch);
- for (i = 0; i < s->state_in_len; i++) {
- BZ_UPDATE_CRC( s->blockCRC, ch );
- }
- s->inUse[s->state_in_ch] = True;
- switch (s->state_in_len) {
- case 1:
- s->block[s->nblock] = (UChar)ch; s->nblock++;
- break;
- case 2:
- s->block[s->nblock] = (UChar)ch; s->nblock++;
- s->block[s->nblock] = (UChar)ch; s->nblock++;
- break;
- case 3:
- s->block[s->nblock] = (UChar)ch; s->nblock++;
- s->block[s->nblock] = (UChar)ch; s->nblock++;
- s->block[s->nblock] = (UChar)ch; s->nblock++;
- break;
- default:
- s->inUse[s->state_in_len-4] = True;
- s->block[s->nblock] = (UChar)ch; s->nblock++;
- s->block[s->nblock] = (UChar)ch; s->nblock++;
- s->block[s->nblock] = (UChar)ch; s->nblock++;
- s->block[s->nblock] = (UChar)ch; s->nblock++;
- s->block[s->nblock] = ((UChar)(s->state_in_len-4));
- s->nblock++;
- break;
- }
-}
-
-
-/*---------------------------------------------------*/
-static
-void flush_RL ( EState* s )
-{
- if (s->state_in_ch < 256) add_pair_to_block ( s );
- init_RL ( s );
-}
-
-
-/*---------------------------------------------------*/
-#define ADD_CHAR_TO_BLOCK(zs,zchh0) \
-{ \
- UInt32 zchh = (UInt32)(zchh0); \
- /*-- fast track the common case --*/ \
- if (zchh != zs->state_in_ch && \
- zs->state_in_len == 1) { \
- UChar ch = (UChar)(zs->state_in_ch); \
- BZ_UPDATE_CRC( zs->blockCRC, ch ); \
- zs->inUse[zs->state_in_ch] = True; \
- zs->block[zs->nblock] = (UChar)ch; \
- zs->nblock++; \
- zs->state_in_ch = zchh; \
- } \
- else \
- /*-- general, uncommon cases --*/ \
- if (zchh != zs->state_in_ch || \
- zs->state_in_len == 255) { \
- if (zs->state_in_ch < 256) \
- add_pair_to_block ( zs ); \
- zs->state_in_ch = zchh; \
- zs->state_in_len = 1; \
- } else { \
- zs->state_in_len++; \
- } \
-}
-
-
-/*---------------------------------------------------*/
-static
-Bool copy_input_until_stop ( EState* s )
-{
- Bool progress_in = False;
-
- if (s->mode == BZ_M_RUNNING) {
-
- /*-- fast track the common case --*/
- while (True) {
- /*-- block full? --*/
- if (s->nblock >= s->nblockMAX) break;
- /*-- no input? --*/
- if (s->strm->avail_in == 0) break;
- progress_in = True;
- ADD_CHAR_TO_BLOCK ( s, (UInt32)(*((UChar*)(s->strm->next_in))) );
- s->strm->next_in++;
- s->strm->avail_in--;
- s->strm->total_in_lo32++;
- if (s->strm->total_in_lo32 == 0) s->strm->total_in_hi32++;
- }
-
- } else {
-
- /*-- general, uncommon case --*/
- while (True) {
- /*-- block full? --*/
- if (s->nblock >= s->nblockMAX) break;
- /*-- no input? --*/
- if (s->strm->avail_in == 0) break;
- /*-- flush/finish end? --*/
- if (s->avail_in_expect == 0) break;
- progress_in = True;
- ADD_CHAR_TO_BLOCK ( s, (UInt32)(*((UChar*)(s->strm->next_in))) );
- s->strm->next_in++;
- s->strm->avail_in--;
- s->strm->total_in_lo32++;
- if (s->strm->total_in_lo32 == 0) s->strm->total_in_hi32++;
- s->avail_in_expect--;
- }
- }
- return progress_in;
-}
-
-
-/*---------------------------------------------------*/
-static
-Bool copy_output_until_stop ( EState* s )
-{
- Bool progress_out = False;
-
- while (True) {
-
- /*-- no output space? --*/
- if (s->strm->avail_out == 0) break;
-
- /*-- block done? --*/
- if (s->state_out_pos >= s->numZ) break;
-
- progress_out = True;
- *(s->strm->next_out) = s->zbits[s->state_out_pos];
- s->state_out_pos++;
- s->strm->avail_out--;
- s->strm->next_out++;
- s->strm->total_out_lo32++;
- if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
- }
-
- return progress_out;
-}
-
-
-/*---------------------------------------------------*/
-static
-Bool handle_compress ( bz_stream* strm )
-{
- Bool progress_in = False;
- Bool progress_out = False;
- EState* s = strm->state;
-
- while (True) {
-
- if (s->state == BZ_S_OUTPUT) {
- progress_out |= copy_output_until_stop ( s );
- if (s->state_out_pos < s->numZ) break;
- if (s->mode == BZ_M_FINISHING &&
- s->avail_in_expect == 0 &&
- isempty_RL(s)) break;
- prepare_new_block ( s );
- s->state = BZ_S_INPUT;
- if (s->mode == BZ_M_FLUSHING &&
- s->avail_in_expect == 0 &&
- isempty_RL(s)) break;
- }
-
- if (s->state == BZ_S_INPUT) {
- progress_in |= copy_input_until_stop ( s );
- if (s->mode != BZ_M_RUNNING && s->avail_in_expect == 0) {
- flush_RL ( s );
- BZ2_compressBlock ( s, (Bool)(s->mode == BZ_M_FINISHING) );
- s->state = BZ_S_OUTPUT;
- }
- else
- if (s->nblock >= s->nblockMAX) {
- BZ2_compressBlock ( s, False );
- s->state = BZ_S_OUTPUT;
- }
- else
- if (s->strm->avail_in == 0) {
- break;
- }
- }
-
- }
-
- return progress_in || progress_out;
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzCompress) ( bz_stream *strm, int action )
-{
- Bool progress;
- EState* s;
- if (strm == NULL) return BZ_PARAM_ERROR;
- s = strm->state;
- if (s == NULL) return BZ_PARAM_ERROR;
- if (s->strm != strm) return BZ_PARAM_ERROR;
-
- preswitch:
- switch (s->mode) {
-
- case BZ_M_IDLE:
- return BZ_SEQUENCE_ERROR;
-
- case BZ_M_RUNNING:
- if (action == BZ_RUN) {
- progress = handle_compress ( strm );
- return progress ? BZ_RUN_OK : BZ_PARAM_ERROR;
- }
- else
- if (action == BZ_FLUSH) {
- s->avail_in_expect = strm->avail_in;
- s->mode = BZ_M_FLUSHING;
- goto preswitch;
- }
- else
- if (action == BZ_FINISH) {
- s->avail_in_expect = strm->avail_in;
- s->mode = BZ_M_FINISHING;
- goto preswitch;
- }
- else
- return BZ_PARAM_ERROR;
-
- case BZ_M_FLUSHING:
- if (action != BZ_FLUSH) return BZ_SEQUENCE_ERROR;
- if (s->avail_in_expect != s->strm->avail_in)
- return BZ_SEQUENCE_ERROR;
- progress = handle_compress ( strm );
- if (s->avail_in_expect > 0 || !isempty_RL(s) ||
- s->state_out_pos < s->numZ) return BZ_FLUSH_OK;
- s->mode = BZ_M_RUNNING;
- return BZ_RUN_OK;
-
- case BZ_M_FINISHING:
- if (action != BZ_FINISH) return BZ_SEQUENCE_ERROR;
- if (s->avail_in_expect != s->strm->avail_in)
- return BZ_SEQUENCE_ERROR;
- progress = handle_compress ( strm );
- if (!progress) return BZ_SEQUENCE_ERROR;
- if (s->avail_in_expect > 0 || !isempty_RL(s) ||
- s->state_out_pos < s->numZ) return BZ_FINISH_OK;
- s->mode = BZ_M_IDLE;
- return BZ_STREAM_END;
- }
- return BZ_OK; /*--not reached--*/
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzCompressEnd) ( bz_stream *strm )
-{
- EState* s;
- if (strm == NULL) return BZ_PARAM_ERROR;
- s = strm->state;
- if (s == NULL) return BZ_PARAM_ERROR;
- if (s->strm != strm) return BZ_PARAM_ERROR;
-
- if (s->arr1 != NULL) BZFREE(s->arr1);
- if (s->arr2 != NULL) BZFREE(s->arr2);
- if (s->ftab != NULL) BZFREE(s->ftab);
- BZFREE(strm->state);
-
- strm->state = NULL;
-
- return BZ_OK;
-}
-#endif /* BZ_NO_COMPRESS */
-
-/*---------------------------------------------------*/
-/*--- Decompression stuff ---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzDecompressInit)
- ( bz_stream* strm,
- int verbosity,
- int small )
-{
- DState* s;
-
- if (!bz_config_ok()) return BZ_CONFIG_ERROR;
-
- if (strm == NULL) return BZ_PARAM_ERROR;
- if (small != 0 && small != 1) return BZ_PARAM_ERROR;
- if (verbosity < 0 || verbosity > 4) return BZ_PARAM_ERROR;
-
- if (strm->bzalloc == NULL) strm->bzalloc = default_bzalloc;
- if (strm->bzfree == NULL) strm->bzfree = default_bzfree;
-
- s = BZALLOC( sizeof(DState) );
- if (s == NULL) return BZ_MEM_ERROR;
- s->strm = strm;
- strm->state = s;
- s->state = BZ_X_MAGIC_1;
- s->bsLive = 0;
- s->bsBuff = 0;
- s->calculatedCombinedCRC = 0;
- strm->total_in_lo32 = 0;
- strm->total_in_hi32 = 0;
- strm->total_out_lo32 = 0;
- strm->total_out_hi32 = 0;
- s->smallDecompress = (Bool)small;
- s->ll4 = NULL;
- s->ll16 = NULL;
- s->tt = NULL;
- s->currBlockNo = 0;
- s->verbosity = verbosity;
-
- return BZ_OK;
-}
-
-
-/*---------------------------------------------------*/
-static
-void unRLE_obuf_to_output_FAST ( DState* s )
-{
- UChar k1;
-
- if (s->blockRandomised) {
-
- while (True) {
- /* try to finish existing run */
- while (True) {
- if (s->strm->avail_out == 0) return;
- if (s->state_out_len == 0) break;
- *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
- BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
- s->state_out_len--;
- s->strm->next_out++;
- s->strm->avail_out--;
- s->strm->total_out_lo32++;
- if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
- }
-
- /* can a new run be started? */
- if (s->nblock_used == s->save_nblock+1) return;
-
-
- s->state_out_len = 1;
- s->state_out_ch = s->k0;
- BZ_GET_FAST(k1); BZ_RAND_UPD_MASK;
- k1 ^= BZ_RAND_MASK; s->nblock_used++;
- if (s->nblock_used == s->save_nblock+1) continue;
- if (k1 != s->k0) { s->k0 = k1; continue; };
-
- s->state_out_len = 2;
- BZ_GET_FAST(k1); BZ_RAND_UPD_MASK;
- k1 ^= BZ_RAND_MASK; s->nblock_used++;
- if (s->nblock_used == s->save_nblock+1) continue;
- if (k1 != s->k0) { s->k0 = k1; continue; };
-
- s->state_out_len = 3;
- BZ_GET_FAST(k1); BZ_RAND_UPD_MASK;
- k1 ^= BZ_RAND_MASK; s->nblock_used++;
- if (s->nblock_used == s->save_nblock+1) continue;
- if (k1 != s->k0) { s->k0 = k1; continue; };
-
- BZ_GET_FAST(k1); BZ_RAND_UPD_MASK;
- k1 ^= BZ_RAND_MASK; s->nblock_used++;
- s->state_out_len = ((Int32)k1) + 4;
- BZ_GET_FAST(s->k0); BZ_RAND_UPD_MASK;
- s->k0 ^= BZ_RAND_MASK; s->nblock_used++;
- }
-
- } else {
-
- /* restore */
- UInt32 c_calculatedBlockCRC = s->calculatedBlockCRC;
- UChar c_state_out_ch = s->state_out_ch;
- Int32 c_state_out_len = s->state_out_len;
- Int32 c_nblock_used = s->nblock_used;
- Int32 c_k0 = s->k0;
- UInt32* c_tt = s->tt;
- UInt32 c_tPos = s->tPos;
- char* cs_next_out = s->strm->next_out;
- unsigned int cs_avail_out = s->strm->avail_out;
- /* end restore */
-
- UInt32 avail_out_INIT = cs_avail_out;
- Int32 s_save_nblockPP = s->save_nblock+1;
- unsigned int total_out_lo32_old;
-
- while (True) {
-
- /* try to finish existing run */
- if (c_state_out_len > 0) {
- while (True) {
- if (cs_avail_out == 0) goto return_notr;
- if (c_state_out_len == 1) break;
- *( (UChar*)(cs_next_out) ) = c_state_out_ch;
- BZ_UPDATE_CRC ( c_calculatedBlockCRC, c_state_out_ch );
- c_state_out_len--;
- cs_next_out++;
- cs_avail_out--;
- }
- s_state_out_len_eq_one:
- {
- if (cs_avail_out == 0) {
- c_state_out_len = 1; goto return_notr;
- };
- *( (UChar*)(cs_next_out) ) = c_state_out_ch;
- BZ_UPDATE_CRC ( c_calculatedBlockCRC, c_state_out_ch );
- cs_next_out++;
- cs_avail_out--;
- }
- }
- /* can a new run be started? */
- if (c_nblock_used == s_save_nblockPP) {
- c_state_out_len = 0; goto return_notr;
- };
- c_state_out_ch = c_k0;
- BZ_GET_FAST_C(k1); c_nblock_used++;
- if (k1 != c_k0) {
- c_k0 = k1; goto s_state_out_len_eq_one;
- };
- if (c_nblock_used == s_save_nblockPP)
- goto s_state_out_len_eq_one;
-
- c_state_out_len = 2;
- BZ_GET_FAST_C(k1); c_nblock_used++;
- if (c_nblock_used == s_save_nblockPP) continue;
- if (k1 != c_k0) { c_k0 = k1; continue; };
-
- c_state_out_len = 3;
- BZ_GET_FAST_C(k1); c_nblock_used++;
- if (c_nblock_used == s_save_nblockPP) continue;
- if (k1 != c_k0) { c_k0 = k1; continue; };
-
- BZ_GET_FAST_C(k1); c_nblock_used++;
- c_state_out_len = ((Int32)k1) + 4;
- BZ_GET_FAST_C(c_k0); c_nblock_used++;
- }
-
- return_notr:
- total_out_lo32_old = s->strm->total_out_lo32;
- s->strm->total_out_lo32 += (avail_out_INIT - cs_avail_out);
- if (s->strm->total_out_lo32 < total_out_lo32_old)
- s->strm->total_out_hi32++;
-
- /* save */
- s->calculatedBlockCRC = c_calculatedBlockCRC;
- s->state_out_ch = c_state_out_ch;
- s->state_out_len = c_state_out_len;
- s->nblock_used = c_nblock_used;
- s->k0 = c_k0;
- s->tt = c_tt;
- s->tPos = c_tPos;
- s->strm->next_out = cs_next_out;
- s->strm->avail_out = cs_avail_out;
- /* end save */
- }
-}
-
-
-/*---------------------------------------------------*/
-__inline__ Int32 BZ2_indexIntoF ( Int32 indx, Int32 *cftab )
-{
- Int32 nb, na, mid;
- nb = 0;
- na = 256;
- do {
- mid = (nb + na) >> 1;
- if (indx >= cftab[mid]) nb = mid; else na = mid;
- }
- while (na - nb != 1);
- return nb;
-}
-
-
-/*---------------------------------------------------*/
-static
-void unRLE_obuf_to_output_SMALL ( DState* s )
-{
- UChar k1;
-
- if (s->blockRandomised) {
-
- while (True) {
- /* try to finish existing run */
- while (True) {
- if (s->strm->avail_out == 0) return;
- if (s->state_out_len == 0) break;
- *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
- BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
- s->state_out_len--;
- s->strm->next_out++;
- s->strm->avail_out--;
- s->strm->total_out_lo32++;
- if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
- }
-
- /* can a new run be started? */
- if (s->nblock_used == s->save_nblock+1) return;
-
-
- s->state_out_len = 1;
- s->state_out_ch = s->k0;
- BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK;
- k1 ^= BZ_RAND_MASK; s->nblock_used++;
- if (s->nblock_used == s->save_nblock+1) continue;
- if (k1 != s->k0) { s->k0 = k1; continue; };
-
- s->state_out_len = 2;
- BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK;
- k1 ^= BZ_RAND_MASK; s->nblock_used++;
- if (s->nblock_used == s->save_nblock+1) continue;
- if (k1 != s->k0) { s->k0 = k1; continue; };
-
- s->state_out_len = 3;
- BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK;
- k1 ^= BZ_RAND_MASK; s->nblock_used++;
- if (s->nblock_used == s->save_nblock+1) continue;
- if (k1 != s->k0) { s->k0 = k1; continue; };
-
- BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK;
- k1 ^= BZ_RAND_MASK; s->nblock_used++;
- s->state_out_len = ((Int32)k1) + 4;
- BZ_GET_SMALL(s->k0); BZ_RAND_UPD_MASK;
- s->k0 ^= BZ_RAND_MASK; s->nblock_used++;
- }
-
- } else {
-
- while (True) {
- /* try to finish existing run */
- while (True) {
- if (s->strm->avail_out == 0) return;
- if (s->state_out_len == 0) break;
- *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
- BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
- s->state_out_len--;
- s->strm->next_out++;
- s->strm->avail_out--;
- s->strm->total_out_lo32++;
- if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
- }
-
- /* can a new run be started? */
- if (s->nblock_used == s->save_nblock+1) return;
-
- s->state_out_len = 1;
- s->state_out_ch = s->k0;
- BZ_GET_SMALL(k1); s->nblock_used++;
- if (s->nblock_used == s->save_nblock+1) continue;
- if (k1 != s->k0) { s->k0 = k1; continue; };
-
- s->state_out_len = 2;
- BZ_GET_SMALL(k1); s->nblock_used++;
- if (s->nblock_used == s->save_nblock+1) continue;
- if (k1 != s->k0) { s->k0 = k1; continue; };
-
- s->state_out_len = 3;
- BZ_GET_SMALL(k1); s->nblock_used++;
- if (s->nblock_used == s->save_nblock+1) continue;
- if (k1 != s->k0) { s->k0 = k1; continue; };
-
- BZ_GET_SMALL(k1); s->nblock_used++;
- s->state_out_len = ((Int32)k1) + 4;
- BZ_GET_SMALL(s->k0); s->nblock_used++;
- }
-
- }
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzDecompress) ( bz_stream *strm )
-{
- DState* s;
- if (strm == NULL) return BZ_PARAM_ERROR;
- s = strm->state;
- if (s == NULL) return BZ_PARAM_ERROR;
- if (s->strm != strm) return BZ_PARAM_ERROR;
-
- while (True) {
-#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
- WATCHDOG_RESET();
-#endif
- if (s->state == BZ_X_IDLE) return BZ_SEQUENCE_ERROR;
- if (s->state == BZ_X_OUTPUT) {
- if (s->smallDecompress)
- unRLE_obuf_to_output_SMALL ( s ); else
- unRLE_obuf_to_output_FAST ( s );
- if (s->nblock_used == s->save_nblock+1 && s->state_out_len == 0) {
- BZ_FINALISE_CRC ( s->calculatedBlockCRC );
- if (s->verbosity >= 3)
- VPrintf2 ( " {0x%x, 0x%x}", s->storedBlockCRC,
- s->calculatedBlockCRC );
- if (s->verbosity >= 2) VPrintf0 ( "]" );
- if (s->calculatedBlockCRC != s->storedBlockCRC)
- return BZ_DATA_ERROR;
- s->calculatedCombinedCRC
- = (s->calculatedCombinedCRC << 1) |
- (s->calculatedCombinedCRC >> 31);
- s->calculatedCombinedCRC ^= s->calculatedBlockCRC;
- s->state = BZ_X_BLKHDR_1;
- } else {
- return BZ_OK;
- }
- }
- if (s->state >= BZ_X_MAGIC_1) {
- Int32 r = BZ2_decompress ( s );
- if (r == BZ_STREAM_END) {
- if (s->verbosity >= 3)
- VPrintf2 ( "\n combined CRCs: stored = 0x%x, computed = 0x%x",
- s->storedCombinedCRC, s->calculatedCombinedCRC );
- if (s->calculatedCombinedCRC != s->storedCombinedCRC)
- return BZ_DATA_ERROR;
- return r;
- }
- if (s->state != BZ_X_OUTPUT) return r;
- }
- }
-
- AssertH ( 0, 6001 );
-
- return 0; /*NOTREACHED*/
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzDecompressEnd) ( bz_stream *strm )
-{
- DState* s;
- if (strm == NULL) return BZ_PARAM_ERROR;
- s = strm->state;
- if (s == NULL) return BZ_PARAM_ERROR;
- if (s->strm != strm) return BZ_PARAM_ERROR;
-
- if (s->tt != NULL) BZFREE(s->tt);
- if (s->ll16 != NULL) BZFREE(s->ll16);
- if (s->ll4 != NULL) BZFREE(s->ll4);
-
- BZFREE(strm->state);
- strm->state = NULL;
-
- return BZ_OK;
-}
-
-
-#ifndef BZ_NO_STDIO
-/*---------------------------------------------------*/
-/*--- File I/O stuff ---*/
-/*---------------------------------------------------*/
-
-#define BZ_SETERR(eee) \
-{ \
- if (bzerror != NULL) *bzerror = eee; \
- if (bzf != NULL) bzf->lastErr = eee; \
-}
-
-typedef
- struct {
- FILE* handle;
- Char buf[BZ_MAX_UNUSED];
- Int32 bufN;
- Bool writing;
- bz_stream strm;
- Int32 lastErr;
- Bool initialisedOk;
- }
- bzFile;
-
-
-/*---------------------------------------------*/
-static Bool myfeof ( FILE* f )
-{
- Int32 c = fgetc ( f );
- if (c == EOF) return True;
- ungetc ( c, f );
- return False;
-}
-
-
-/*---------------------------------------------------*/
-BZFILE* BZ_API(BZ2_bzWriteOpen)
- ( int* bzerror,
- FILE* f,
- int blockSize100k,
- int verbosity,
- int workFactor )
-{
- Int32 ret;
- bzFile* bzf = NULL;
-
- BZ_SETERR(BZ_OK);
-
- if (f == NULL ||
- (blockSize100k < 1 || blockSize100k > 9) ||
- (workFactor < 0 || workFactor > 250) ||
- (verbosity < 0 || verbosity > 4))
- { BZ_SETERR(BZ_PARAM_ERROR); return NULL; };
-
- if (ferror(f))
- { BZ_SETERR(BZ_IO_ERROR); return NULL; };
-
- bzf = malloc ( sizeof(bzFile) );
- if (bzf == NULL)
- { BZ_SETERR(BZ_MEM_ERROR); return NULL; };
-
- BZ_SETERR(BZ_OK);
- bzf->initialisedOk = False;
- bzf->bufN = 0;
- bzf->handle = f;
- bzf->writing = True;
- bzf->strm.bzalloc = NULL;
- bzf->strm.bzfree = NULL;
- bzf->strm.opaque = NULL;
-
- if (workFactor == 0) workFactor = 30;
- ret = BZ2_bzCompressInit ( &(bzf->strm), blockSize100k,
- verbosity, workFactor );
- if (ret != BZ_OK)
- { BZ_SETERR(ret); free(bzf); return NULL; };
-
- bzf->strm.avail_in = 0;
- bzf->initialisedOk = True;
- return bzf;
-}
-
-
-/*---------------------------------------------------*/
-void BZ_API(BZ2_bzWrite)
- ( int* bzerror,
- BZFILE* b,
- void* buf,
- int len )
-{
- Int32 n, n2, ret;
- bzFile* bzf = (bzFile*)b;
-
- BZ_SETERR(BZ_OK);
- if (bzf == NULL || buf == NULL || len < 0)
- { BZ_SETERR(BZ_PARAM_ERROR); return; };
- if (!(bzf->writing))
- { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
- if (ferror(bzf->handle))
- { BZ_SETERR(BZ_IO_ERROR); return; };
-
- if (len == 0)
- { BZ_SETERR(BZ_OK); return; };
-
- bzf->strm.avail_in = len;
- bzf->strm.next_in = buf;
-
- while (True) {
- bzf->strm.avail_out = BZ_MAX_UNUSED;
- bzf->strm.next_out = bzf->buf;
- ret = BZ2_bzCompress ( &(bzf->strm), BZ_RUN );
- if (ret != BZ_RUN_OK)
- { BZ_SETERR(ret); return; };
-
- if (bzf->strm.avail_out < BZ_MAX_UNUSED) {
- n = BZ_MAX_UNUSED - bzf->strm.avail_out;
- n2 = fwrite ( (void*)(bzf->buf), sizeof(UChar),
- n, bzf->handle );
- if (n != n2 || ferror(bzf->handle))
- { BZ_SETERR(BZ_IO_ERROR); return; };
- }
-
- if (bzf->strm.avail_in == 0)
- { BZ_SETERR(BZ_OK); return; };
- }
-}
-
-
-/*---------------------------------------------------*/
-void BZ_API(BZ2_bzWriteClose)
- ( int* bzerror,
- BZFILE* b,
- int abandon,
- unsigned int* nbytes_in,
- unsigned int* nbytes_out )
-{
- BZ2_bzWriteClose64 ( bzerror, b, abandon,
- nbytes_in, NULL, nbytes_out, NULL );
-}
-
-
-void BZ_API(BZ2_bzWriteClose64)
- ( int* bzerror,
- BZFILE* b,
- int abandon,
- unsigned int* nbytes_in_lo32,
- unsigned int* nbytes_in_hi32,
- unsigned int* nbytes_out_lo32,
- unsigned int* nbytes_out_hi32 )
-{
- Int32 n, n2, ret;
- bzFile* bzf = (bzFile*)b;
-
- if (bzf == NULL)
- { BZ_SETERR(BZ_OK); return; };
- if (!(bzf->writing))
- { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
- if (ferror(bzf->handle))
- { BZ_SETERR(BZ_IO_ERROR); return; };
-
- if (nbytes_in_lo32 != NULL) *nbytes_in_lo32 = 0;
- if (nbytes_in_hi32 != NULL) *nbytes_in_hi32 = 0;
- if (nbytes_out_lo32 != NULL) *nbytes_out_lo32 = 0;
- if (nbytes_out_hi32 != NULL) *nbytes_out_hi32 = 0;
-
- if ((!abandon) && bzf->lastErr == BZ_OK) {
- while (True) {
- bzf->strm.avail_out = BZ_MAX_UNUSED;
- bzf->strm.next_out = bzf->buf;
- ret = BZ2_bzCompress ( &(bzf->strm), BZ_FINISH );
- if (ret != BZ_FINISH_OK && ret != BZ_STREAM_END)
- { BZ_SETERR(ret); return; };
-
- if (bzf->strm.avail_out < BZ_MAX_UNUSED) {
- n = BZ_MAX_UNUSED - bzf->strm.avail_out;
- n2 = fwrite ( (void*)(bzf->buf), sizeof(UChar),
- n, bzf->handle );
- if (n != n2 || ferror(bzf->handle))
- { BZ_SETERR(BZ_IO_ERROR); return; };
- }
-
- if (ret == BZ_STREAM_END) break;
- }
- }
-
- if ( !abandon && !ferror ( bzf->handle ) ) {
- fflush ( bzf->handle );
- if (ferror(bzf->handle))
- { BZ_SETERR(BZ_IO_ERROR); return; };
- }
-
- if (nbytes_in_lo32 != NULL)
- *nbytes_in_lo32 = bzf->strm.total_in_lo32;
- if (nbytes_in_hi32 != NULL)
- *nbytes_in_hi32 = bzf->strm.total_in_hi32;
- if (nbytes_out_lo32 != NULL)
- *nbytes_out_lo32 = bzf->strm.total_out_lo32;
- if (nbytes_out_hi32 != NULL)
- *nbytes_out_hi32 = bzf->strm.total_out_hi32;
-
- BZ_SETERR(BZ_OK);
- BZ2_bzCompressEnd ( &(bzf->strm) );
- free ( bzf );
-}
-
-
-/*---------------------------------------------------*/
-BZFILE* BZ_API(BZ2_bzReadOpen)
- ( int* bzerror,
- FILE* f,
- int verbosity,
- int small,
- void* unused,
- int nUnused )
-{
- bzFile* bzf = NULL;
- int ret;
-
- BZ_SETERR(BZ_OK);
-
- if (f == NULL ||
- (small != 0 && small != 1) ||
- (verbosity < 0 || verbosity > 4) ||
- (unused == NULL && nUnused != 0) ||
- (unused != NULL && (nUnused < 0 || nUnused > BZ_MAX_UNUSED)))
- { BZ_SETERR(BZ_PARAM_ERROR); return NULL; };
-
- if (ferror(f))
- { BZ_SETERR(BZ_IO_ERROR); return NULL; };
-
- bzf = malloc ( sizeof(bzFile) );
- if (bzf == NULL)
- { BZ_SETERR(BZ_MEM_ERROR); return NULL; };
-
- BZ_SETERR(BZ_OK);
-
- bzf->initialisedOk = False;
- bzf->handle = f;
- bzf->bufN = 0;
- bzf->writing = False;
- bzf->strm.bzalloc = NULL;
- bzf->strm.bzfree = NULL;
- bzf->strm.opaque = NULL;
-
- while (nUnused > 0) {
- bzf->buf[bzf->bufN] = *((UChar*)(unused)); bzf->bufN++;
- unused = ((void*)( 1 + ((UChar*)(unused)) ));
- nUnused--;
- }
-
- ret = BZ2_bzDecompressInit ( &(bzf->strm), verbosity, small );
- if (ret != BZ_OK)
- { BZ_SETERR(ret); free(bzf); return NULL; };
-
- bzf->strm.avail_in = bzf->bufN;
- bzf->strm.next_in = bzf->buf;
-
- bzf->initialisedOk = True;
- return bzf;
-}
-
-
-/*---------------------------------------------------*/
-void BZ_API(BZ2_bzReadClose) ( int *bzerror, BZFILE *b )
-{
- bzFile* bzf = (bzFile*)b;
-
- BZ_SETERR(BZ_OK);
- if (bzf == NULL)
- { BZ_SETERR(BZ_OK); return; };
-
- if (bzf->writing)
- { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
-
- if (bzf->initialisedOk)
- (void)BZ2_bzDecompressEnd ( &(bzf->strm) );
- free ( bzf );
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzRead)
- ( int* bzerror,
- BZFILE* b,
- void* buf,
- int len )
-{
- Int32 n, ret;
- bzFile* bzf = (bzFile*)b;
-
- BZ_SETERR(BZ_OK);
-
- if (bzf == NULL || buf == NULL || len < 0)
- { BZ_SETERR(BZ_PARAM_ERROR); return 0; };
-
- if (bzf->writing)
- { BZ_SETERR(BZ_SEQUENCE_ERROR); return 0; };
-
- if (len == 0)
- { BZ_SETERR(BZ_OK); return 0; };
-
- bzf->strm.avail_out = len;
- bzf->strm.next_out = buf;
-
- while (True) {
-
- if (ferror(bzf->handle))
- { BZ_SETERR(BZ_IO_ERROR); return 0; };
-
- if (bzf->strm.avail_in == 0 && !myfeof(bzf->handle)) {
- n = fread ( bzf->buf, sizeof(UChar),
- BZ_MAX_UNUSED, bzf->handle );
- if (ferror(bzf->handle))
- { BZ_SETERR(BZ_IO_ERROR); return 0; };
- bzf->bufN = n;
- bzf->strm.avail_in = bzf->bufN;
- bzf->strm.next_in = bzf->buf;
- }
-
- ret = BZ2_bzDecompress ( &(bzf->strm) );
-
- if (ret != BZ_OK && ret != BZ_STREAM_END)
- { BZ_SETERR(ret); return 0; };
-
- if (ret == BZ_OK && myfeof(bzf->handle) &&
- bzf->strm.avail_in == 0 && bzf->strm.avail_out > 0)
- { BZ_SETERR(BZ_UNEXPECTED_EOF); return 0; };
-
- if (ret == BZ_STREAM_END)
- { BZ_SETERR(BZ_STREAM_END);
- return len - bzf->strm.avail_out; };
- if (bzf->strm.avail_out == 0)
- { BZ_SETERR(BZ_OK); return len; };
-
- }
-
- return 0; /*not reached*/
-}
-
-
-/*---------------------------------------------------*/
-void BZ_API(BZ2_bzReadGetUnused)
- ( int* bzerror,
- BZFILE* b,
- void** unused,
- int* nUnused )
-{
- bzFile* bzf = (bzFile*)b;
- if (bzf == NULL)
- { BZ_SETERR(BZ_PARAM_ERROR); return; };
- if (bzf->lastErr != BZ_STREAM_END)
- { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
- if (unused == NULL || nUnused == NULL)
- { BZ_SETERR(BZ_PARAM_ERROR); return; };
-
- BZ_SETERR(BZ_OK);
- *nUnused = bzf->strm.avail_in;
- *unused = bzf->strm.next_in;
-}
-#endif
-
-
-/*---------------------------------------------------*/
-/*--- Misc convenience stuff ---*/
-/*---------------------------------------------------*/
-#ifndef BZ_NO_COMPRESS
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzBuffToBuffCompress)
- ( char* dest,
- unsigned int* destLen,
- char* source,
- unsigned int sourceLen,
- int blockSize100k,
- int verbosity,
- int workFactor )
-{
- bz_stream strm;
- int ret;
-
- if (dest == NULL || destLen == NULL ||
- source == NULL ||
- blockSize100k < 1 || blockSize100k > 9 ||
- verbosity < 0 || verbosity > 4 ||
- workFactor < 0 || workFactor > 250)
- return BZ_PARAM_ERROR;
-
- if (workFactor == 0) workFactor = 30;
- strm.bzalloc = NULL;
- strm.bzfree = NULL;
- strm.opaque = NULL;
- ret = BZ2_bzCompressInit ( &strm, blockSize100k,
- verbosity, workFactor );
- if (ret != BZ_OK) return ret;
-
- strm.next_in = source;
- strm.next_out = dest;
- strm.avail_in = sourceLen;
- strm.avail_out = *destLen;
-
- ret = BZ2_bzCompress ( &strm, BZ_FINISH );
- if (ret == BZ_FINISH_OK) goto output_overflow;
- if (ret != BZ_STREAM_END) goto errhandler;
-
- /* normal termination */
- *destLen -= strm.avail_out;
- BZ2_bzCompressEnd ( &strm );
- return BZ_OK;
-
- output_overflow:
- BZ2_bzCompressEnd ( &strm );
- return BZ_OUTBUFF_FULL;
-
- errhandler:
- BZ2_bzCompressEnd ( &strm );
- return ret;
-}
-#endif /* BZ_NO_COMPRESS */
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzBuffToBuffDecompress)
- ( char* dest,
- unsigned int* destLen,
- char* source,
- unsigned int sourceLen,
- int small,
- int verbosity )
-{
- bz_stream strm;
- int ret;
-
- if (destLen == NULL || source == NULL)
- return BZ_PARAM_ERROR;
-
- strm.bzalloc = NULL;
- strm.bzfree = NULL;
- strm.opaque = NULL;
- ret = BZ2_bzDecompressInit ( &strm, verbosity, small );
- if (ret != BZ_OK) return ret;
-
- strm.next_in = source;
- strm.next_out = dest;
- strm.avail_in = sourceLen;
- strm.avail_out = *destLen;
-
- ret = BZ2_bzDecompress ( &strm );
- if (ret == BZ_OK) goto output_overflow_or_eof;
- if (ret != BZ_STREAM_END) goto errhandler;
-
- /* normal termination */
- *destLen -= strm.avail_out;
- BZ2_bzDecompressEnd ( &strm );
- return BZ_OK;
-
- output_overflow_or_eof:
- if (strm.avail_out > 0) {
- BZ2_bzDecompressEnd ( &strm );
- return BZ_UNEXPECTED_EOF;
- } else {
- BZ2_bzDecompressEnd ( &strm );
- return BZ_OUTBUFF_FULL;
- };
-
- errhandler:
- BZ2_bzDecompressEnd ( &strm );
- return ret;
-}
-
-
-/*---------------------------------------------------*/
-/*--
- Code contributed by Yoshioka Tsuneo
- (QWF00133@niftyserve.or.jp/tsuneo-y@is.aist-nara.ac.jp),
- to support better zlib compatibility.
- This code is not _officially_ part of libbzip2 (yet);
- I haven't tested it, documented it, or considered the
- threading-safeness of it.
- If this code breaks, please contact both Yoshioka and me.
---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------------*/
-/*--
- return version like "0.9.0c".
---*/
-const char * BZ_API(BZ2_bzlibVersion)(void)
-{
- return BZ_VERSION;
-}
-
-
-#ifndef BZ_NO_STDIO
-/*---------------------------------------------------*/
-
-#if defined(_WIN32) || defined(OS2) || defined(MSDOS)
-# include <fcntl.h>
-# include <io.h>
-# define SET_BINARY_MODE(file) setmode(fileno(file),O_BINARY)
-#else
-# define SET_BINARY_MODE(file)
-#endif
-static
-BZFILE * bzopen_or_bzdopen
- ( const char *path, /* no use when bzdopen */
- int fd, /* no use when bzdopen */
- const char *mode,
- int open_mode) /* bzopen: 0, bzdopen:1 */
-{
- int bzerr;
- char unused[BZ_MAX_UNUSED];
- int blockSize100k = 9;
- int writing = 0;
- char mode2[10] = "";
- FILE *fp = NULL;
- BZFILE *bzfp = NULL;
- int verbosity = 0;
- int workFactor = 30;
- int smallMode = 0;
- int nUnused = 0;
-
- if (mode == NULL) return NULL;
- while (*mode) {
- switch (*mode) {
- case 'r':
- writing = 0; break;
- case 'w':
- writing = 1; break;
- case 's':
- smallMode = 1; break;
- default:
- if (isdigit((int)(*mode))) {
- blockSize100k = *mode-BZ_HDR_0;
- }
- }
- mode++;
- }
- strcat(mode2, writing ? "w" : "r" );
- strcat(mode2,"b"); /* binary mode */
-
- if (open_mode==0) {
- if (path==NULL || strcmp(path,"")==0) {
- fp = (writing ? stdout : stdin);
- SET_BINARY_MODE(fp);
- } else {
- fp = fopen(path,mode2);
- }
- } else {
-#ifdef BZ_STRICT_ANSI
- fp = NULL;
-#else
- fp = fdopen(fd,mode2);
-#endif
- }
- if (fp == NULL) return NULL;
-
- if (writing) {
- /* Guard against total chaos and anarchy -- JRS */
- if (blockSize100k < 1) blockSize100k = 1;
- if (blockSize100k > 9) blockSize100k = 9;
- bzfp = BZ2_bzWriteOpen(&bzerr,fp,blockSize100k,
- verbosity,workFactor);
- } else {
- bzfp = BZ2_bzReadOpen(&bzerr,fp,verbosity,smallMode,
- unused,nUnused);
- }
- if (bzfp == NULL) {
- if (fp != stdin && fp != stdout) fclose(fp);
- return NULL;
- }
- return bzfp;
-}
-
-
-/*---------------------------------------------------*/
-/*--
- open file for read or write.
- ex) bzopen("file","w9")
- case path="" or NULL => use stdin or stdout.
---*/
-BZFILE * BZ_API(BZ2_bzopen)
- ( const char *path,
- const char *mode )
-{
- return bzopen_or_bzdopen(path,-1,mode,/*bzopen*/0);
-}
-
-
-/*---------------------------------------------------*/
-BZFILE * BZ_API(BZ2_bzdopen)
- ( int fd,
- const char *mode )
-{
- return bzopen_or_bzdopen(NULL,fd,mode,/*bzdopen*/1);
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzread) (BZFILE* b, void* buf, int len )
-{
- int bzerr, nread;
- if (((bzFile*)b)->lastErr == BZ_STREAM_END) return 0;
- nread = BZ2_bzRead(&bzerr,b,buf,len);
- if (bzerr == BZ_OK || bzerr == BZ_STREAM_END) {
- return nread;
- } else {
- return -1;
- }
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzwrite) (BZFILE* b, void* buf, int len )
-{
- int bzerr;
-
- BZ2_bzWrite(&bzerr,b,buf,len);
- if(bzerr == BZ_OK){
- return len;
- }else{
- return -1;
- }
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzflush) (BZFILE *b)
-{
- /* do nothing now... */
- return 0;
-}
-
-
-/*---------------------------------------------------*/
-void BZ_API(BZ2_bzclose) (BZFILE* b)
-{
- int bzerr;
- FILE *fp = ((bzFile *)b)->handle;
-
- if (b==NULL) {return;}
- if(((bzFile*)b)->writing){
- BZ2_bzWriteClose(&bzerr,b,0,NULL,NULL);
- if(bzerr != BZ_OK){
- BZ2_bzWriteClose(NULL,b,1,NULL,NULL);
- }
- }else{
- BZ2_bzReadClose(&bzerr,b);
- }
- if(fp!=stdin && fp!=stdout){
- fclose(fp);
- }
-}
-
-
-/*---------------------------------------------------*/
-/*--
- return last error code
---*/
-static char *bzerrorstrings[] = {
- "OK"
- ,"SEQUENCE_ERROR"
- ,"PARAM_ERROR"
- ,"MEM_ERROR"
- ,"DATA_ERROR"
- ,"DATA_ERROR_MAGIC"
- ,"IO_ERROR"
- ,"UNEXPECTED_EOF"
- ,"OUTBUFF_FULL"
- ,"CONFIG_ERROR"
- ,"???" /* for future */
- ,"???" /* for future */
- ,"???" /* for future */
- ,"???" /* for future */
- ,"???" /* for future */
- ,"???" /* for future */
-};
-
-
-const char * BZ_API(BZ2_bzerror) (BZFILE *b, int *errnum)
-{
- int err = ((bzFile *)b)->lastErr;
-
- if(err>0) err = 0;
- *errnum = err;
- return bzerrorstrings[err*-1];
-}
-#endif
diff --git a/lib/bzlib_crctable.c b/lib/bzlib_crctable.c
deleted file mode 100644
index 325b966..0000000
--- a/lib/bzlib_crctable.c
+++ /dev/null
@@ -1,145 +0,0 @@
-#include <config.h>
-
-/*-------------------------------------------------------------*/
-/*--- Table for doing CRCs ---*/
-/*--- crctable.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
- This file is a part of bzip2 and/or libbzip2, a program and
- library for lossless, block-sorting data compression.
-
- Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- 2. The origin of this software must not be misrepresented; you must
- not claim that you wrote the original software. If you use this
- software in a product, an acknowledgment in the product
- documentation would be appreciated but is not required.
-
- 3. Altered source versions must be plainly marked as such, and must
- not be misrepresented as being the original software.
-
- 4. The name of the author may not be used to endorse or promote
- products derived from this software without specific prior written
- permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- Julian Seward, Cambridge, UK.
- jseward@acm.org
- bzip2/libbzip2 version 1.0 of 21 March 2000
-
- This program is based on (at least) the work of:
- Mike Burrows
- David Wheeler
- Peter Fenwick
- Alistair Moffat
- Radford Neal
- Ian H. Witten
- Robert Sedgewick
- Jon L. Bentley
-
- For more information on these sources, see the manual.
---*/
-
-
-#include "bzlib_private.h"
-
-/*--
- I think this is an implementation of the AUTODIN-II,
- Ethernet & FDDI 32-bit CRC standard. Vaguely derived
- from code by Rob Warnock, in Section 51 of the
- comp.compression FAQ.
---*/
-
-UInt32 BZ2_crc32Table[256] = {
-
- /*-- Ugly, innit? --*/
-
- 0x00000000L, 0x04c11db7L, 0x09823b6eL, 0x0d4326d9L,
- 0x130476dcL, 0x17c56b6bL, 0x1a864db2L, 0x1e475005L,
- 0x2608edb8L, 0x22c9f00fL, 0x2f8ad6d6L, 0x2b4bcb61L,
- 0x350c9b64L, 0x31cd86d3L, 0x3c8ea00aL, 0x384fbdbdL,
- 0x4c11db70L, 0x48d0c6c7L, 0x4593e01eL, 0x4152fda9L,
- 0x5f15adacL, 0x5bd4b01bL, 0x569796c2L, 0x52568b75L,
- 0x6a1936c8L, 0x6ed82b7fL, 0x639b0da6L, 0x675a1011L,
- 0x791d4014L, 0x7ddc5da3L, 0x709f7b7aL, 0x745e66cdL,
- 0x9823b6e0L, 0x9ce2ab57L, 0x91a18d8eL, 0x95609039L,
- 0x8b27c03cL, 0x8fe6dd8bL, 0x82a5fb52L, 0x8664e6e5L,
- 0xbe2b5b58L, 0xbaea46efL, 0xb7a96036L, 0xb3687d81L,
- 0xad2f2d84L, 0xa9ee3033L, 0xa4ad16eaL, 0xa06c0b5dL,
- 0xd4326d90L, 0xd0f37027L, 0xddb056feL, 0xd9714b49L,
- 0xc7361b4cL, 0xc3f706fbL, 0xceb42022L, 0xca753d95L,
- 0xf23a8028L, 0xf6fb9d9fL, 0xfbb8bb46L, 0xff79a6f1L,
- 0xe13ef6f4L, 0xe5ffeb43L, 0xe8bccd9aL, 0xec7dd02dL,
- 0x34867077L, 0x30476dc0L, 0x3d044b19L, 0x39c556aeL,
- 0x278206abL, 0x23431b1cL, 0x2e003dc5L, 0x2ac12072L,
- 0x128e9dcfL, 0x164f8078L, 0x1b0ca6a1L, 0x1fcdbb16L,
- 0x018aeb13L, 0x054bf6a4L, 0x0808d07dL, 0x0cc9cdcaL,
- 0x7897ab07L, 0x7c56b6b0L, 0x71159069L, 0x75d48ddeL,
- 0x6b93dddbL, 0x6f52c06cL, 0x6211e6b5L, 0x66d0fb02L,
- 0x5e9f46bfL, 0x5a5e5b08L, 0x571d7dd1L, 0x53dc6066L,
- 0x4d9b3063L, 0x495a2dd4L, 0x44190b0dL, 0x40d816baL,
- 0xaca5c697L, 0xa864db20L, 0xa527fdf9L, 0xa1e6e04eL,
- 0xbfa1b04bL, 0xbb60adfcL, 0xb6238b25L, 0xb2e29692L,
- 0x8aad2b2fL, 0x8e6c3698L, 0x832f1041L, 0x87ee0df6L,
- 0x99a95df3L, 0x9d684044L, 0x902b669dL, 0x94ea7b2aL,
- 0xe0b41de7L, 0xe4750050L, 0xe9362689L, 0xedf73b3eL,
- 0xf3b06b3bL, 0xf771768cL, 0xfa325055L, 0xfef34de2L,
- 0xc6bcf05fL, 0xc27dede8L, 0xcf3ecb31L, 0xcbffd686L,
- 0xd5b88683L, 0xd1799b34L, 0xdc3abdedL, 0xd8fba05aL,
- 0x690ce0eeL, 0x6dcdfd59L, 0x608edb80L, 0x644fc637L,
- 0x7a089632L, 0x7ec98b85L, 0x738aad5cL, 0x774bb0ebL,
- 0x4f040d56L, 0x4bc510e1L, 0x46863638L, 0x42472b8fL,
- 0x5c007b8aL, 0x58c1663dL, 0x558240e4L, 0x51435d53L,
- 0x251d3b9eL, 0x21dc2629L, 0x2c9f00f0L, 0x285e1d47L,
- 0x36194d42L, 0x32d850f5L, 0x3f9b762cL, 0x3b5a6b9bL,
- 0x0315d626L, 0x07d4cb91L, 0x0a97ed48L, 0x0e56f0ffL,
- 0x1011a0faL, 0x14d0bd4dL, 0x19939b94L, 0x1d528623L,
- 0xf12f560eL, 0xf5ee4bb9L, 0xf8ad6d60L, 0xfc6c70d7L,
- 0xe22b20d2L, 0xe6ea3d65L, 0xeba91bbcL, 0xef68060bL,
- 0xd727bbb6L, 0xd3e6a601L, 0xdea580d8L, 0xda649d6fL,
- 0xc423cd6aL, 0xc0e2d0ddL, 0xcda1f604L, 0xc960ebb3L,
- 0xbd3e8d7eL, 0xb9ff90c9L, 0xb4bcb610L, 0xb07daba7L,
- 0xae3afba2L, 0xaafbe615L, 0xa7b8c0ccL, 0xa379dd7bL,
- 0x9b3660c6L, 0x9ff77d71L, 0x92b45ba8L, 0x9675461fL,
- 0x8832161aL, 0x8cf30badL, 0x81b02d74L, 0x857130c3L,
- 0x5d8a9099L, 0x594b8d2eL, 0x5408abf7L, 0x50c9b640L,
- 0x4e8ee645L, 0x4a4ffbf2L, 0x470cdd2bL, 0x43cdc09cL,
- 0x7b827d21L, 0x7f436096L, 0x7200464fL, 0x76c15bf8L,
- 0x68860bfdL, 0x6c47164aL, 0x61043093L, 0x65c52d24L,
- 0x119b4be9L, 0x155a565eL, 0x18197087L, 0x1cd86d30L,
- 0x029f3d35L, 0x065e2082L, 0x0b1d065bL, 0x0fdc1becL,
- 0x3793a651L, 0x3352bbe6L, 0x3e119d3fL, 0x3ad08088L,
- 0x2497d08dL, 0x2056cd3aL, 0x2d15ebe3L, 0x29d4f654L,
- 0xc5a92679L, 0xc1683bceL, 0xcc2b1d17L, 0xc8ea00a0L,
- 0xd6ad50a5L, 0xd26c4d12L, 0xdf2f6bcbL, 0xdbee767cL,
- 0xe3a1cbc1L, 0xe760d676L, 0xea23f0afL, 0xeee2ed18L,
- 0xf0a5bd1dL, 0xf464a0aaL, 0xf9278673L, 0xfde69bc4L,
- 0x89b8fd09L, 0x8d79e0beL, 0x803ac667L, 0x84fbdbd0L,
- 0x9abc8bd5L, 0x9e7d9662L, 0x933eb0bbL, 0x97ffad0cL,
- 0xafb010b1L, 0xab710d06L, 0xa6322bdfL, 0xa2f33668L,
- 0xbcb4666dL, 0xb8757bdaL, 0xb5365d03L, 0xb1f740b4L
-};
-
-
-/*-------------------------------------------------------------*/
-/*--- end crctable.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/lib/bzlib_decompress.c b/lib/bzlib_decompress.c
deleted file mode 100644
index 4412b8a..0000000
--- a/lib/bzlib_decompress.c
+++ /dev/null
@@ -1,674 +0,0 @@
-#include <config.h>
-#include <common.h>
-#include <watchdog.h>
-
-/*-------------------------------------------------------------*/
-/*--- Decompression machinery ---*/
-/*--- decompress.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
- This file is a part of bzip2 and/or libbzip2, a program and
- library for lossless, block-sorting data compression.
-
- Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- 2. The origin of this software must not be misrepresented; you must
- not claim that you wrote the original software. If you use this
- software in a product, an acknowledgment in the product
- documentation would be appreciated but is not required.
-
- 3. Altered source versions must be plainly marked as such, and must
- not be misrepresented as being the original software.
-
- 4. The name of the author may not be used to endorse or promote
- products derived from this software without specific prior written
- permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- Julian Seward, Cambridge, UK.
- jseward@acm.org
- bzip2/libbzip2 version 1.0 of 21 March 2000
-
- This program is based on (at least) the work of:
- Mike Burrows
- David Wheeler
- Peter Fenwick
- Alistair Moffat
- Radford Neal
- Ian H. Witten
- Robert Sedgewick
- Jon L. Bentley
-
- For more information on these sources, see the manual.
---*/
-
-
-#include "bzlib_private.h"
-
-
-/*---------------------------------------------------*/
-static
-void makeMaps_d ( DState* s )
-{
- Int32 i;
- s->nInUse = 0;
- for (i = 0; i < 256; i++)
- if (s->inUse[i]) {
- s->seqToUnseq[s->nInUse] = i;
- s->nInUse++;
- }
-}
-
-
-/*---------------------------------------------------*/
-#define RETURN(rrr) \
- { retVal = rrr; goto save_state_and_return; };
-
-#define GET_BITS(lll,vvv,nnn) \
- case lll: s->state = lll; \
- while (True) { \
- if (s->bsLive >= nnn) { \
- UInt32 v; \
- v = (s->bsBuff >> \
- (s->bsLive-nnn)) & ((1 << nnn)-1); \
- s->bsLive -= nnn; \
- vvv = v; \
- break; \
- } \
- if (s->strm->avail_in == 0) RETURN(BZ_OK); \
- s->bsBuff \
- = (s->bsBuff << 8) | \
- ((UInt32) \
- (*((UChar*)(s->strm->next_in)))); \
- s->bsLive += 8; \
- s->strm->next_in++; \
- s->strm->avail_in--; \
- s->strm->total_in_lo32++; \
- if (s->strm->total_in_lo32 == 0) \
- s->strm->total_in_hi32++; \
- }
-
-#define GET_UCHAR(lll,uuu) \
- GET_BITS(lll,uuu,8)
-
-#define GET_BIT(lll,uuu) \
- GET_BITS(lll,uuu,1)
-
-/*---------------------------------------------------*/
-#define GET_MTF_VAL(label1,label2,lval) \
-{ \
- if (groupPos == 0) { \
- groupNo++; \
- if (groupNo >= nSelectors) \
- RETURN(BZ_DATA_ERROR); \
- groupPos = BZ_G_SIZE; \
- gSel = s->selector[groupNo]; \
- gMinlen = s->minLens[gSel]; \
- gLimit = &(s->limit[gSel][0]); \
- gPerm = &(s->perm[gSel][0]); \
- gBase = &(s->base[gSel][0]); \
- } \
- groupPos--; \
- zn = gMinlen; \
- GET_BITS(label1, zvec, zn); \
- while (1) { \
- if (zn > 20 /* the longest code */) \
- RETURN(BZ_DATA_ERROR); \
- if (zvec <= gLimit[zn]) break; \
- zn++; \
- GET_BIT(label2, zj); \
- zvec = (zvec << 1) | zj; \
- }; \
- if (zvec - gBase[zn] < 0 \
- || zvec - gBase[zn] >= BZ_MAX_ALPHA_SIZE) \
- RETURN(BZ_DATA_ERROR); \
- lval = gPerm[zvec - gBase[zn]]; \
-}
-
-
-/*---------------------------------------------------*/
-Int32 BZ2_decompress ( DState* s )
-{
- UChar uc;
- Int32 retVal;
- Int32 minLen, maxLen;
- bz_stream* strm = s->strm;
-
- /* stuff that needs to be saved/restored */
- Int32 i;
- Int32 j;
- Int32 t;
- Int32 alphaSize;
- Int32 nGroups;
- Int32 nSelectors;
- Int32 EOB;
- Int32 groupNo;
- Int32 groupPos;
- Int32 nextSym;
- Int32 nblockMAX;
- Int32 nblock;
- Int32 es;
- Int32 N;
- Int32 curr;
- Int32 zt;
- Int32 zn;
- Int32 zvec;
- Int32 zj;
- Int32 gSel;
- Int32 gMinlen;
- Int32* gLimit;
- Int32* gBase;
- Int32* gPerm;
-
- if (s->state == BZ_X_MAGIC_1) {
- /*initialise the save area*/
- s->save_i = 0;
- s->save_j = 0;
- s->save_t = 0;
- s->save_alphaSize = 0;
- s->save_nGroups = 0;
- s->save_nSelectors = 0;
- s->save_EOB = 0;
- s->save_groupNo = 0;
- s->save_groupPos = 0;
- s->save_nextSym = 0;
- s->save_nblockMAX = 0;
- s->save_nblock = 0;
- s->save_es = 0;
- s->save_N = 0;
- s->save_curr = 0;
- s->save_zt = 0;
- s->save_zn = 0;
- s->save_zvec = 0;
- s->save_zj = 0;
- s->save_gSel = 0;
- s->save_gMinlen = 0;
- s->save_gLimit = NULL;
- s->save_gBase = NULL;
- s->save_gPerm = NULL;
- }
-
- /*restore from the save area*/
- i = s->save_i;
- j = s->save_j;
- t = s->save_t;
- alphaSize = s->save_alphaSize;
- nGroups = s->save_nGroups;
- nSelectors = s->save_nSelectors;
- EOB = s->save_EOB;
- groupNo = s->save_groupNo;
- groupPos = s->save_groupPos;
- nextSym = s->save_nextSym;
- nblockMAX = s->save_nblockMAX;
- nblock = s->save_nblock;
- es = s->save_es;
- N = s->save_N;
- curr = s->save_curr;
- zt = s->save_zt;
- zn = s->save_zn;
- zvec = s->save_zvec;
- zj = s->save_zj;
- gSel = s->save_gSel;
- gMinlen = s->save_gMinlen;
- gLimit = s->save_gLimit;
- gBase = s->save_gBase;
- gPerm = s->save_gPerm;
-
- retVal = BZ_OK;
-
- switch (s->state) {
-
- GET_UCHAR(BZ_X_MAGIC_1, uc);
- if (uc != BZ_HDR_B) RETURN(BZ_DATA_ERROR_MAGIC);
-
- GET_UCHAR(BZ_X_MAGIC_2, uc);
- if (uc != BZ_HDR_Z) RETURN(BZ_DATA_ERROR_MAGIC);
-
- GET_UCHAR(BZ_X_MAGIC_3, uc)
- if (uc != BZ_HDR_h) RETURN(BZ_DATA_ERROR_MAGIC);
-
- GET_BITS(BZ_X_MAGIC_4, s->blockSize100k, 8)
- if (s->blockSize100k < (BZ_HDR_0 + 1) ||
- s->blockSize100k > (BZ_HDR_0 + 9)) RETURN(BZ_DATA_ERROR_MAGIC);
- s->blockSize100k -= BZ_HDR_0;
-
- if (s->smallDecompress) {
- s->ll16 = BZALLOC( s->blockSize100k * 100000 * sizeof(UInt16) );
- s->ll4 = BZALLOC(
- ((1 + s->blockSize100k * 100000) >> 1) * sizeof(UChar)
- );
- if (s->ll16 == NULL || s->ll4 == NULL) RETURN(BZ_MEM_ERROR);
- } else {
- s->tt = BZALLOC( s->blockSize100k * 100000 * sizeof(Int32) );
- if (s->tt == NULL) RETURN(BZ_MEM_ERROR);
- }
-
- GET_UCHAR(BZ_X_BLKHDR_1, uc);
-
- if (uc == 0x17) goto endhdr_2;
- if (uc != 0x31) RETURN(BZ_DATA_ERROR);
- GET_UCHAR(BZ_X_BLKHDR_2, uc);
- if (uc != 0x41) RETURN(BZ_DATA_ERROR);
- GET_UCHAR(BZ_X_BLKHDR_3, uc);
- if (uc != 0x59) RETURN(BZ_DATA_ERROR);
- GET_UCHAR(BZ_X_BLKHDR_4, uc);
- if (uc != 0x26) RETURN(BZ_DATA_ERROR);
- GET_UCHAR(BZ_X_BLKHDR_5, uc);
- if (uc != 0x53) RETURN(BZ_DATA_ERROR);
- GET_UCHAR(BZ_X_BLKHDR_6, uc);
- if (uc != 0x59) RETURN(BZ_DATA_ERROR);
-
- s->currBlockNo++;
- if (s->verbosity >= 2)
- VPrintf1 ( "\n [%d: huff+mtf ", s->currBlockNo );
-
- s->storedBlockCRC = 0;
- GET_UCHAR(BZ_X_BCRC_1, uc);
- s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
- GET_UCHAR(BZ_X_BCRC_2, uc);
- s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
- GET_UCHAR(BZ_X_BCRC_3, uc);
- s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
- GET_UCHAR(BZ_X_BCRC_4, uc);
- s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
-
- GET_BITS(BZ_X_RANDBIT, s->blockRandomised, 1);
-
- s->origPtr = 0;
- GET_UCHAR(BZ_X_ORIGPTR_1, uc);
- s->origPtr = (s->origPtr << 8) | ((Int32)uc);
- GET_UCHAR(BZ_X_ORIGPTR_2, uc);
- s->origPtr = (s->origPtr << 8) | ((Int32)uc);
- GET_UCHAR(BZ_X_ORIGPTR_3, uc);
- s->origPtr = (s->origPtr << 8) | ((Int32)uc);
-
- if (s->origPtr < 0)
- RETURN(BZ_DATA_ERROR);
- if (s->origPtr > 10 + 100000*s->blockSize100k)
- RETURN(BZ_DATA_ERROR);
-
- /*--- Receive the mapping table ---*/
- for (i = 0; i < 16; i++) {
- GET_BIT(BZ_X_MAPPING_1, uc);
- if (uc == 1)
- s->inUse16[i] = True; else
- s->inUse16[i] = False;
- }
-
- for (i = 0; i < 256; i++) s->inUse[i] = False;
-
- for (i = 0; i < 16; i++)
- if (s->inUse16[i])
- for (j = 0; j < 16; j++) {
- GET_BIT(BZ_X_MAPPING_2, uc);
- if (uc == 1) s->inUse[i * 16 + j] = True;
- }
- makeMaps_d ( s );
- if (s->nInUse == 0) RETURN(BZ_DATA_ERROR);
- alphaSize = s->nInUse+2;
-
- /*--- Now the selectors ---*/
- GET_BITS(BZ_X_SELECTOR_1, nGroups, 3);
- if (nGroups < 2 || nGroups > 6) RETURN(BZ_DATA_ERROR);
- GET_BITS(BZ_X_SELECTOR_2, nSelectors, 15);
- if (nSelectors < 1) RETURN(BZ_DATA_ERROR);
- for (i = 0; i < nSelectors; i++) {
- j = 0;
- while (True) {
- GET_BIT(BZ_X_SELECTOR_3, uc);
- if (uc == 0) break;
- j++;
- if (j >= nGroups) RETURN(BZ_DATA_ERROR);
- }
- s->selectorMtf[i] = j;
- }
-
- /*--- Undo the MTF values for the selectors. ---*/
- {
- UChar pos[BZ_N_GROUPS], tmp, v;
- for (v = 0; v < nGroups; v++) pos[v] = v;
-
- for (i = 0; i < nSelectors; i++) {
- v = s->selectorMtf[i];
- tmp = pos[v];
- while (v > 0) { pos[v] = pos[v-1]; v--; }
- pos[0] = tmp;
- s->selector[i] = tmp;
- }
- }
-
- /*--- Now the coding tables ---*/
- for (t = 0; t < nGroups; t++) {
- GET_BITS(BZ_X_CODING_1, curr, 5);
- for (i = 0; i < alphaSize; i++) {
- while (True) {
- if (curr < 1 || curr > 20) RETURN(BZ_DATA_ERROR);
- GET_BIT(BZ_X_CODING_2, uc);
- if (uc == 0) break;
- GET_BIT(BZ_X_CODING_3, uc);
- if (uc == 0) curr++; else curr--;
- }
- s->len[t][i] = curr;
- }
- }
-
- /*--- Create the Huffman decoding tables ---*/
- for (t = 0; t < nGroups; t++) {
- minLen = 32;
- maxLen = 0;
- for (i = 0; i < alphaSize; i++) {
- if (s->len[t][i] > maxLen) maxLen = s->len[t][i];
- if (s->len[t][i] < minLen) minLen = s->len[t][i];
- }
- BZ2_hbCreateDecodeTables (
- &(s->limit[t][0]),
- &(s->base[t][0]),
- &(s->perm[t][0]),
- &(s->len[t][0]),
- minLen, maxLen, alphaSize
- );
- s->minLens[t] = minLen;
- }
-
- /*--- Now the MTF values ---*/
-
- EOB = s->nInUse+1;
- nblockMAX = 100000 * s->blockSize100k;
- groupNo = -1;
- groupPos = 0;
-
- for (i = 0; i <= 255; i++) s->unzftab[i] = 0;
-
- /*-- MTF init --*/
- {
- Int32 ii, jj, kk;
- kk = MTFA_SIZE-1;
- for (ii = 256 / MTFL_SIZE - 1; ii >= 0; ii--) {
- for (jj = MTFL_SIZE-1; jj >= 0; jj--) {
- s->mtfa[kk] = (UChar)(ii * MTFL_SIZE + jj);
- kk--;
- }
- s->mtfbase[ii] = kk + 1;
- }
- }
- /*-- end MTF init --*/
-
- nblock = 0;
- GET_MTF_VAL(BZ_X_MTF_1, BZ_X_MTF_2, nextSym);
-
- while (True) {
-
-#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
- WATCHDOG_RESET();
-#endif
- if (nextSym == EOB) break;
-
- if (nextSym == BZ_RUNA || nextSym == BZ_RUNB) {
-
- es = -1;
- N = 1;
- do {
- if (nextSym == BZ_RUNA) es = es + (0+1) * N; else
- if (nextSym == BZ_RUNB) es = es + (1+1) * N;
- N = N * 2;
- GET_MTF_VAL(BZ_X_MTF_3, BZ_X_MTF_4, nextSym);
- }
- while (nextSym == BZ_RUNA || nextSym == BZ_RUNB);
-
- es++;
- uc = s->seqToUnseq[ s->mtfa[s->mtfbase[0]] ];
- s->unzftab[uc] += es;
-
- if (s->smallDecompress)
- while (es > 0) {
- if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);
- s->ll16[nblock] = (UInt16)uc;
- nblock++;
- es--;
- }
- else
- while (es > 0) {
- if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);
- s->tt[nblock] = (UInt32)uc;
- nblock++;
- es--;
- };
-
- continue;
-
- } else {
-
- if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);
-
- /*-- uc = MTF ( nextSym-1 ) --*/
- {
- Int32 ii, jj, kk, pp, lno, off;
- UInt32 nn;
- nn = (UInt32)(nextSym - 1);
-
- if (nn < MTFL_SIZE) {
- /* avoid general-case expense */
- pp = s->mtfbase[0];
- uc = s->mtfa[pp+nn];
- while (nn > 3) {
- Int32 z = pp+nn;
- s->mtfa[(z) ] = s->mtfa[(z)-1];
- s->mtfa[(z)-1] = s->mtfa[(z)-2];
- s->mtfa[(z)-2] = s->mtfa[(z)-3];
- s->mtfa[(z)-3] = s->mtfa[(z)-4];
- nn -= 4;
- }
- while (nn > 0) {
- s->mtfa[(pp+nn)] = s->mtfa[(pp+nn)-1]; nn--;
- };
- s->mtfa[pp] = uc;
- } else {
- /* general case */
- lno = nn / MTFL_SIZE;
- off = nn % MTFL_SIZE;
- pp = s->mtfbase[lno] + off;
- uc = s->mtfa[pp];
- while (pp > s->mtfbase[lno]) {
- s->mtfa[pp] = s->mtfa[pp-1]; pp--;
- };
- s->mtfbase[lno]++;
- while (lno > 0) {
- s->mtfbase[lno]--;
- s->mtfa[s->mtfbase[lno]]
- = s->mtfa[s->mtfbase[lno-1] + MTFL_SIZE - 1];
- lno--;
- }
- s->mtfbase[0]--;
- s->mtfa[s->mtfbase[0]] = uc;
- if (s->mtfbase[0] == 0) {
- kk = MTFA_SIZE-1;
- for (ii = 256 / MTFL_SIZE-1; ii >= 0; ii--) {
-#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
- WATCHDOG_RESET();
-#endif
- for (jj = MTFL_SIZE-1; jj >= 0; jj--) {
- s->mtfa[kk] = s->mtfa[s->mtfbase[ii] + jj];
- kk--;
- }
- s->mtfbase[ii] = kk + 1;
- }
- }
- }
- }
- /*-- end uc = MTF ( nextSym-1 ) --*/
-
- s->unzftab[s->seqToUnseq[uc]]++;
- if (s->smallDecompress)
- s->ll16[nblock] = (UInt16)(s->seqToUnseq[uc]); else
- s->tt[nblock] = (UInt32)(s->seqToUnseq[uc]);
- nblock++;
-
- GET_MTF_VAL(BZ_X_MTF_5, BZ_X_MTF_6, nextSym);
- continue;
- }
- }
-
- /* Now we know what nblock is, we can do a better sanity
- check on s->origPtr.
- */
- if (s->origPtr < 0 || s->origPtr >= nblock)
- RETURN(BZ_DATA_ERROR);
-
- s->state_out_len = 0;
- s->state_out_ch = 0;
- BZ_INITIALISE_CRC ( s->calculatedBlockCRC );
- s->state = BZ_X_OUTPUT;
- if (s->verbosity >= 2) VPrintf0 ( "rt+rld" );
-
- /*-- Set up cftab to facilitate generation of T^(-1) --*/
- s->cftab[0] = 0;
- for (i = 1; i <= 256; i++) s->cftab[i] = s->unzftab[i-1];
- for (i = 1; i <= 256; i++) s->cftab[i] += s->cftab[i-1];
-
- if (s->smallDecompress) {
-
- /*-- Make a copy of cftab, used in generation of T --*/
- for (i = 0; i <= 256; i++) s->cftabCopy[i] = s->cftab[i];
-
- /*-- compute the T vector --*/
- for (i = 0; i < nblock; i++) {
- uc = (UChar)(s->ll16[i]);
- SET_LL(i, s->cftabCopy[uc]);
- s->cftabCopy[uc]++;
- }
-
- /*-- Compute T^(-1) by pointer reversal on T --*/
- i = s->origPtr;
- j = GET_LL(i);
- do {
- Int32 tmp = GET_LL(j);
- SET_LL(j, i);
- i = j;
- j = tmp;
- }
- while (i != s->origPtr);
-
-#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
- WATCHDOG_RESET();
-#endif
- s->tPos = s->origPtr;
- s->nblock_used = 0;
- if (s->blockRandomised) {
- BZ_RAND_INIT_MASK;
- BZ_GET_SMALL(s->k0); s->nblock_used++;
- BZ_RAND_UPD_MASK; s->k0 ^= BZ_RAND_MASK;
- } else {
- BZ_GET_SMALL(s->k0); s->nblock_used++;
- }
-
- } else {
-
-#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
- WATCHDOG_RESET();
-#endif
- /*-- compute the T^(-1) vector --*/
- for (i = 0; i < nblock; i++) {
- uc = (UChar)(s->tt[i] & 0xff);
- s->tt[s->cftab[uc]] |= (i << 8);
- s->cftab[uc]++;
- }
-
- s->tPos = s->tt[s->origPtr] >> 8;
- s->nblock_used = 0;
- if (s->blockRandomised) {
- BZ_RAND_INIT_MASK;
- BZ_GET_FAST(s->k0); s->nblock_used++;
- BZ_RAND_UPD_MASK; s->k0 ^= BZ_RAND_MASK;
- } else {
- BZ_GET_FAST(s->k0); s->nblock_used++;
- }
-
- }
-
- RETURN(BZ_OK);
-
-
- endhdr_2:
-
- GET_UCHAR(BZ_X_ENDHDR_2, uc);
- if (uc != 0x72) RETURN(BZ_DATA_ERROR);
- GET_UCHAR(BZ_X_ENDHDR_3, uc);
- if (uc != 0x45) RETURN(BZ_DATA_ERROR);
- GET_UCHAR(BZ_X_ENDHDR_4, uc);
- if (uc != 0x38) RETURN(BZ_DATA_ERROR);
- GET_UCHAR(BZ_X_ENDHDR_5, uc);
- if (uc != 0x50) RETURN(BZ_DATA_ERROR);
- GET_UCHAR(BZ_X_ENDHDR_6, uc);
- if (uc != 0x90) RETURN(BZ_DATA_ERROR);
-
- s->storedCombinedCRC = 0;
- GET_UCHAR(BZ_X_CCRC_1, uc);
- s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
- GET_UCHAR(BZ_X_CCRC_2, uc);
- s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
- GET_UCHAR(BZ_X_CCRC_3, uc);
- s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
- GET_UCHAR(BZ_X_CCRC_4, uc);
- s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
-
- s->state = BZ_X_IDLE;
- RETURN(BZ_STREAM_END);
-
- default: AssertH ( False, 4001 );
- }
-
- AssertH ( False, 4002 );
-
- save_state_and_return:
-
- s->save_i = i;
- s->save_j = j;
- s->save_t = t;
- s->save_alphaSize = alphaSize;
- s->save_nGroups = nGroups;
- s->save_nSelectors = nSelectors;
- s->save_EOB = EOB;
- s->save_groupNo = groupNo;
- s->save_groupPos = groupPos;
- s->save_nextSym = nextSym;
- s->save_nblockMAX = nblockMAX;
- s->save_nblock = nblock;
- s->save_es = es;
- s->save_N = N;
- s->save_curr = curr;
- s->save_zt = zt;
- s->save_zn = zn;
- s->save_zvec = zvec;
- s->save_zj = zj;
- s->save_gSel = gSel;
- s->save_gMinlen = gMinlen;
- s->save_gLimit = gLimit;
- s->save_gBase = gBase;
- s->save_gPerm = gPerm;
-
- return retVal;
-}
-
-
-/*-------------------------------------------------------------*/
-/*--- end decompress.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/lib/bzlib_huffman.c b/lib/bzlib_huffman.c
deleted file mode 100644
index 801b8ec..0000000
--- a/lib/bzlib_huffman.c
+++ /dev/null
@@ -1,229 +0,0 @@
-#include <config.h>
-
-/*-------------------------------------------------------------*/
-/*--- Huffman coding low-level stuff ---*/
-/*--- huffman.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
- This file is a part of bzip2 and/or libbzip2, a program and
- library for lossless, block-sorting data compression.
-
- Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- 2. The origin of this software must not be misrepresented; you must
- not claim that you wrote the original software. If you use this
- software in a product, an acknowledgment in the product
- documentation would be appreciated but is not required.
-
- 3. Altered source versions must be plainly marked as such, and must
- not be misrepresented as being the original software.
-
- 4. The name of the author may not be used to endorse or promote
- products derived from this software without specific prior written
- permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- Julian Seward, Cambridge, UK.
- jseward@acm.org
- bzip2/libbzip2 version 1.0 of 21 March 2000
-
- This program is based on (at least) the work of:
- Mike Burrows
- David Wheeler
- Peter Fenwick
- Alistair Moffat
- Radford Neal
- Ian H. Witten
- Robert Sedgewick
- Jon L. Bentley
-
- For more information on these sources, see the manual.
---*/
-
-
-#include "bzlib_private.h"
-
-/*---------------------------------------------------*/
-#define WEIGHTOF(zz0) ((zz0) & 0xffffff00)
-#define DEPTHOF(zz1) ((zz1) & 0x000000ff)
-#define MYMAX(zz2,zz3) ((zz2) > (zz3) ? (zz2) : (zz3))
-
-#define ADDWEIGHTS(zw1,zw2) \
- (WEIGHTOF(zw1)+WEIGHTOF(zw2)) | \
- (1 + MYMAX(DEPTHOF(zw1),DEPTHOF(zw2)))
-
-#define UPHEAP(z) \
-{ \
- Int32 zz, tmp; \
- zz = z; tmp = heap[zz]; \
- while (weight[tmp] < weight[heap[zz >> 1]]) { \
- heap[zz] = heap[zz >> 1]; \
- zz >>= 1; \
- } \
- heap[zz] = tmp; \
-}
-
-#define DOWNHEAP(z) \
-{ \
- Int32 zz, yy, tmp; \
- zz = z; tmp = heap[zz]; \
- while (True) { \
- yy = zz << 1; \
- if (yy > nHeap) break; \
- if (yy < nHeap && \
- weight[heap[yy+1]] < weight[heap[yy]]) \
- yy++; \
- if (weight[tmp] < weight[heap[yy]]) break; \
- heap[zz] = heap[yy]; \
- zz = yy; \
- } \
- heap[zz] = tmp; \
-}
-
-
-/*---------------------------------------------------*/
-void BZ2_hbMakeCodeLengths ( UChar *len,
- Int32 *freq,
- Int32 alphaSize,
- Int32 maxLen )
-{
- /*--
- Nodes and heap entries run from 1. Entry 0
- for both the heap and nodes is a sentinel.
- --*/
- Int32 nNodes, nHeap, n1, n2, i, j, k;
- Bool tooLong;
-
- Int32 heap [ BZ_MAX_ALPHA_SIZE + 2 ];
- Int32 weight [ BZ_MAX_ALPHA_SIZE * 2 ];
- Int32 parent [ BZ_MAX_ALPHA_SIZE * 2 ];
-
- for (i = 0; i < alphaSize; i++)
- weight[i+1] = (freq[i] == 0 ? 1 : freq[i]) << 8;
-
- while (True) {
-
- nNodes = alphaSize;
- nHeap = 0;
-
- heap[0] = 0;
- weight[0] = 0;
- parent[0] = -2;
-
- for (i = 1; i <= alphaSize; i++) {
- parent[i] = -1;
- nHeap++;
- heap[nHeap] = i;
- UPHEAP(nHeap);
- }
-
- AssertH( nHeap < (BZ_MAX_ALPHA_SIZE+2), 2001 );
-
- while (nHeap > 1) {
- n1 = heap[1]; heap[1] = heap[nHeap]; nHeap--; DOWNHEAP(1);
- n2 = heap[1]; heap[1] = heap[nHeap]; nHeap--; DOWNHEAP(1);
- nNodes++;
- parent[n1] = parent[n2] = nNodes;
- weight[nNodes] = ADDWEIGHTS(weight[n1], weight[n2]);
- parent[nNodes] = -1;
- nHeap++;
- heap[nHeap] = nNodes;
- UPHEAP(nHeap);
- }
-
- AssertH( nNodes < (BZ_MAX_ALPHA_SIZE * 2), 2002 );
-
- tooLong = False;
- for (i = 1; i <= alphaSize; i++) {
- j = 0;
- k = i;
- while (parent[k] >= 0) { k = parent[k]; j++; }
- len[i-1] = j;
- if (j > maxLen) tooLong = True;
- }
-
- if (! tooLong) break;
-
- for (i = 1; i < alphaSize; i++) {
- j = weight[i] >> 8;
- j = 1 + (j / 2);
- weight[i] = j << 8;
- }
- }
-}
-
-
-/*---------------------------------------------------*/
-void BZ2_hbAssignCodes ( Int32 *code,
- UChar *length,
- Int32 minLen,
- Int32 maxLen,
- Int32 alphaSize )
-{
- Int32 n, vec, i;
-
- vec = 0;
- for (n = minLen; n <= maxLen; n++) {
- for (i = 0; i < alphaSize; i++)
- if (length[i] == n) { code[i] = vec; vec++; };
- vec <<= 1;
- }
-}
-
-
-/*---------------------------------------------------*/
-void BZ2_hbCreateDecodeTables ( Int32 *limit,
- Int32 *base,
- Int32 *perm,
- UChar *length,
- Int32 minLen,
- Int32 maxLen,
- Int32 alphaSize )
-{
- Int32 pp, i, j, vec;
-
- pp = 0;
- for (i = minLen; i <= maxLen; i++)
- for (j = 0; j < alphaSize; j++)
- if (length[j] == i) { perm[pp] = j; pp++; };
-
- for (i = 0; i < BZ_MAX_CODE_LEN; i++) base[i] = 0;
- for (i = 0; i < alphaSize; i++) base[length[i]+1]++;
-
- for (i = 1; i < BZ_MAX_CODE_LEN; i++) base[i] += base[i-1];
-
- for (i = 0; i < BZ_MAX_CODE_LEN; i++) limit[i] = 0;
- vec = 0;
-
- for (i = minLen; i <= maxLen; i++) {
- vec += (base[i+1] - base[i]);
- limit[i] = vec-1;
- vec <<= 1;
- }
- for (i = minLen + 1; i <= maxLen; i++)
- base[i] = ((limit[i-1] + 1) << 1) - base[i];
-}
-
-
-/*-------------------------------------------------------------*/
-/*--- end huffman.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/lib/bzlib_randtable.c b/lib/bzlib_randtable.c
deleted file mode 100644
index e620c3e..0000000
--- a/lib/bzlib_randtable.c
+++ /dev/null
@@ -1,126 +0,0 @@
-#include <config.h>
-
-/*-------------------------------------------------------------*/
-/*--- Table for randomising repetitive blocks ---*/
-/*--- randtable.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
- This file is a part of bzip2 and/or libbzip2, a program and
- library for lossless, block-sorting data compression.
-
- Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- 2. The origin of this software must not be misrepresented; you must
- not claim that you wrote the original software. If you use this
- software in a product, an acknowledgment in the product
- documentation would be appreciated but is not required.
-
- 3. Altered source versions must be plainly marked as such, and must
- not be misrepresented as being the original software.
-
- 4. The name of the author may not be used to endorse or promote
- products derived from this software without specific prior written
- permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- Julian Seward, Cambridge, UK.
- jseward@acm.org
- bzip2/libbzip2 version 1.0 of 21 March 2000
-
- This program is based on (at least) the work of:
- Mike Burrows
- David Wheeler
- Peter Fenwick
- Alistair Moffat
- Radford Neal
- Ian H. Witten
- Robert Sedgewick
- Jon L. Bentley
-
- For more information on these sources, see the manual.
---*/
-
-
-#include "bzlib_private.h"
-
-
-/*---------------------------------------------*/
-Int32 BZ2_rNums[512] = {
- 619, 720, 127, 481, 931, 816, 813, 233, 566, 247,
- 985, 724, 205, 454, 863, 491, 741, 242, 949, 214,
- 733, 859, 335, 708, 621, 574, 73, 654, 730, 472,
- 419, 436, 278, 496, 867, 210, 399, 680, 480, 51,
- 878, 465, 811, 169, 869, 675, 611, 697, 867, 561,
- 862, 687, 507, 283, 482, 129, 807, 591, 733, 623,
- 150, 238, 59, 379, 684, 877, 625, 169, 643, 105,
- 170, 607, 520, 932, 727, 476, 693, 425, 174, 647,
- 73, 122, 335, 530, 442, 853, 695, 249, 445, 515,
- 909, 545, 703, 919, 874, 474, 882, 500, 594, 612,
- 641, 801, 220, 162, 819, 984, 589, 513, 495, 799,
- 161, 604, 958, 533, 221, 400, 386, 867, 600, 782,
- 382, 596, 414, 171, 516, 375, 682, 485, 911, 276,
- 98, 553, 163, 354, 666, 933, 424, 341, 533, 870,
- 227, 730, 475, 186, 263, 647, 537, 686, 600, 224,
- 469, 68, 770, 919, 190, 373, 294, 822, 808, 206,
- 184, 943, 795, 384, 383, 461, 404, 758, 839, 887,
- 715, 67, 618, 276, 204, 918, 873, 777, 604, 560,
- 951, 160, 578, 722, 79, 804, 96, 409, 713, 940,
- 652, 934, 970, 447, 318, 353, 859, 672, 112, 785,
- 645, 863, 803, 350, 139, 93, 354, 99, 820, 908,
- 609, 772, 154, 274, 580, 184, 79, 626, 630, 742,
- 653, 282, 762, 623, 680, 81, 927, 626, 789, 125,
- 411, 521, 938, 300, 821, 78, 343, 175, 128, 250,
- 170, 774, 972, 275, 999, 639, 495, 78, 352, 126,
- 857, 956, 358, 619, 580, 124, 737, 594, 701, 612,
- 669, 112, 134, 694, 363, 992, 809, 743, 168, 974,
- 944, 375, 748, 52, 600, 747, 642, 182, 862, 81,
- 344, 805, 988, 739, 511, 655, 814, 334, 249, 515,
- 897, 955, 664, 981, 649, 113, 974, 459, 893, 228,
- 433, 837, 553, 268, 926, 240, 102, 654, 459, 51,
- 686, 754, 806, 760, 493, 403, 415, 394, 687, 700,
- 946, 670, 656, 610, 738, 392, 760, 799, 887, 653,
- 978, 321, 576, 617, 626, 502, 894, 679, 243, 440,
- 680, 879, 194, 572, 640, 724, 926, 56, 204, 700,
- 707, 151, 457, 449, 797, 195, 791, 558, 945, 679,
- 297, 59, 87, 824, 713, 663, 412, 693, 342, 606,
- 134, 108, 571, 364, 631, 212, 174, 643, 304, 329,
- 343, 97, 430, 751, 497, 314, 983, 374, 822, 928,
- 140, 206, 73, 263, 980, 736, 876, 478, 430, 305,
- 170, 514, 364, 692, 829, 82, 855, 953, 676, 246,
- 369, 970, 294, 750, 807, 827, 150, 790, 288, 923,
- 804, 378, 215, 828, 592, 281, 565, 555, 710, 82,
- 896, 831, 547, 261, 524, 462, 293, 465, 502, 56,
- 661, 821, 976, 991, 658, 869, 905, 758, 745, 193,
- 768, 550, 608, 933, 378, 286, 215, 979, 792, 961,
- 61, 688, 793, 644, 986, 403, 106, 366, 905, 644,
- 372, 567, 466, 434, 645, 210, 389, 550, 919, 135,
- 780, 773, 635, 389, 707, 100, 626, 958, 165, 504,
- 920, 176, 193, 713, 857, 265, 203, 50, 668, 108,
- 645, 990, 626, 197, 510, 357, 358, 850, 858, 364,
- 936, 638
-};
-
-
-/*-------------------------------------------------------------*/
-/*--- end randtable.c ---*/
-/*-------------------------------------------------------------*/
-
--
1.7.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH 06/16] add kernel gunzip implementation
2011-11-28 22:09 uncompress work Sascha Hauer
` (4 preceding siblings ...)
2011-11-28 22:09 ` [PATCH 05/16] remove old bzlib Sascha Hauer
@ 2011-11-28 22:09 ` Sascha Hauer
2011-11-28 22:10 ` [PATCH 07/16] remove old zlib Sascha Hauer
` (9 subsequent siblings)
15 siblings, 0 replies; 21+ messages in thread
From: Sascha Hauer @ 2011-11-28 22:09 UTC (permalink / raw)
To: barebox
The kernel uncompression functions have a unified API so use this
implementation to get it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
commands/bootm.c | 10 +-
include/common.h | 2 -
include/gunzip.h | 10 +
include/linux/zconf.h | 57 +++
include/linux/zlib.h | 711 +++++++++++++++++++++++++++++
include/linux/zutil.h | 106 +++++
lib/Makefile | 2 +-
lib/decompress_inflate.c | 183 ++++++++
lib/zlib_inflate/Makefile | 18 +
lib/zlib_inflate/inffast.c | 363 +++++++++++++++
lib/zlib_inflate/inffast.h | 11 +
lib/zlib_inflate/inffixed.h | 94 ++++
lib/zlib_inflate/inflate.c | 918 ++++++++++++++++++++++++++++++++++++++
lib/zlib_inflate/inflate.h | 111 +++++
lib/zlib_inflate/inftrees.c | 315 +++++++++++++
lib/zlib_inflate/inftrees.h | 59 +++
lib/zlib_inflate/infutil.c | 47 ++
lib/zlib_inflate/infutil.h | 25 +
lib/zlib_inflate/modules.builtin | 1 +
19 files changed, 3036 insertions(+), 7 deletions(-)
create mode 100644 include/gunzip.h
create mode 100644 include/linux/zconf.h
create mode 100644 include/linux/zlib.h
create mode 100644 include/linux/zutil.h
create mode 100644 lib/decompress_inflate.c
create mode 100644 lib/zlib_inflate/Makefile
create mode 100644 lib/zlib_inflate/inffast.c
create mode 100644 lib/zlib_inflate/inffast.h
create mode 100644 lib/zlib_inflate/inffixed.h
create mode 100644 lib/zlib_inflate/inflate.c
create mode 100644 lib/zlib_inflate/inflate.h
create mode 100644 lib/zlib_inflate/inftrees.c
create mode 100644 lib/zlib_inflate/inftrees.h
create mode 100644 lib/zlib_inflate/infutil.c
create mode 100644 lib/zlib_inflate/infutil.h
create mode 100644 lib/zlib_inflate/modules.builtin
diff --git a/commands/bootm.c b/commands/bootm.c
index 22b4964..578e9a5 100644
--- a/commands/bootm.c
+++ b/commands/bootm.c
@@ -30,7 +30,7 @@
#include <command.h>
#include <image.h>
#include <malloc.h>
-#include <zlib.h>
+#include <gunzip.h>
#include <environment.h>
#include <asm/byteorder.h>
#include <xfuncs.h>
@@ -134,9 +134,11 @@ int relocate_image(struct image_handle *handle, void *load_address)
#ifdef CONFIG_CMD_BOOTM_ZLIB
case IH_COMP_GZIP:
printf (" Uncompressing ... ");
- if (gunzip (load_address, unc_len,
- (uchar *)data, &len) != 0)
- return -1;
+
+ ret = gunzip((void *)data, len, NULL, NULL, load_address, NULL,
+ unzip_error);
+ if (ret)
+ return ret;
break;
#endif
#ifdef CONFIG_CMD_BOOTM_BZLIB
diff --git a/include/common.h b/include/common.h
index d63ad02..5b69beb 100644
--- a/include/common.h
+++ b/include/common.h
@@ -111,8 +111,6 @@ void __noreturn reset_cpu(unsigned long addr);
void udelay (unsigned long);
void mdelay (unsigned long);
-int gunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp);
-
/* lib_generic/vsprintf.c */
ulong simple_strtoul(const char *cp,char **endp,unsigned int base);
#ifdef CFG_64BIT_VSPRINTF
diff --git a/include/gunzip.h b/include/gunzip.h
new file mode 100644
index 0000000..8c0aef1
--- /dev/null
+++ b/include/gunzip.h
@@ -0,0 +1,10 @@
+#ifndef INFLATE_H
+#define INFLATE_H
+
+int gunzip(unsigned char *inbuf, int len,
+ int(*fill)(void*, unsigned int),
+ int(*flush)(void*, unsigned int),
+ unsigned char *output,
+ int *pos,
+ void(*error_fn)(char *x));
+#endif
diff --git a/include/linux/zconf.h b/include/linux/zconf.h
new file mode 100644
index 0000000..9e8750e
--- /dev/null
+++ b/include/linux/zconf.h
@@ -0,0 +1,57 @@
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-1998 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#ifndef _ZCONF_H
+#define _ZCONF_H
+
+/* The memory requirements for deflate are (in bytes):
+ (1 << (windowBits+2)) + (1 << (memLevel+9))
+ that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+ make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+ The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+# define MAX_MEM_LEVEL 8
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+# define MAX_WBITS 15 /* 32K LZ77 window */
+#endif
+
+/* default windowBits for decompression. MAX_WBITS is for compression only */
+#ifndef DEF_WBITS
+# define DEF_WBITS MAX_WBITS
+#endif
+
+/* default memLevel */
+#if MAX_MEM_LEVEL >= 8
+# define DEF_MEM_LEVEL 8
+#else
+# define DEF_MEM_LEVEL MAX_MEM_LEVEL
+#endif
+
+ /* Type declarations */
+
+typedef unsigned char Byte; /* 8 bits */
+typedef unsigned int uInt; /* 16 bits or more */
+typedef unsigned long uLong; /* 32 bits or more */
+typedef void *voidp;
+
+#endif /* _ZCONF_H */
diff --git a/include/linux/zlib.h b/include/linux/zlib.h
new file mode 100644
index 0000000..d8bd20c
--- /dev/null
+++ b/include/linux/zlib.h
@@ -0,0 +1,711 @@
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+
+ Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Jean-loup Gailly Mark Adler
+ jloup@gzip.org madler@alumni.caltech.edu
+
+
+ The data format used by the zlib library is described by RFCs (Request for
+ Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
+ (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
+*/
+
+#ifndef _ZLIB_H
+#define _ZLIB_H
+
+#include <linux/zconf.h>
+
+/* zlib deflate based on ZLIB_VERSION "1.1.3" */
+/* zlib inflate based on ZLIB_VERSION "1.2.3" */
+
+/*
+ This is a modified version of zlib for use inside the Linux kernel.
+ The main changes are to perform all memory allocation in advance.
+
+ Inflation Changes:
+ * Z_PACKET_FLUSH is added and used by ppp_deflate. Before returning
+ this checks there is no more input data available and the next data
+ is a STORED block. It also resets the mode to be read for the next
+ data, all as per PPP requirements.
+ * Addition of zlib_inflateIncomp which copies incompressible data into
+ the history window and adjusts the accoutning without calling
+ zlib_inflate itself to inflate the data.
+*/
+
+/*
+ The 'zlib' compression library provides in-memory compression and
+ decompression functions, including integrity checks of the uncompressed
+ data. This version of the library supports only one compression method
+ (deflation) but other algorithms will be added later and will have the same
+ stream interface.
+
+ Compression can be done in a single step if the buffers are large
+ enough (for example if an input file is mmap'ed), or can be done by
+ repeated calls of the compression function. In the latter case, the
+ application must provide more input and/or consume the output
+ (providing more output space) before each call.
+
+ The compressed data format used by default by the in-memory functions is
+ the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
+ around a deflate stream, which is itself documented in RFC 1951.
+
+ The library also supports reading and writing files in gzip (.gz) format
+ with an interface similar to that of stdio.
+
+ The zlib format was designed to be compact and fast for use in memory
+ and on communications channels. The gzip format was designed for single-
+ file compression on file systems, has a larger header than zlib to maintain
+ directory information, and uses a different, slower check method than zlib.
+
+ The library does not install any signal handler. The decoder checks
+ the consistency of the compressed data, so the library should never
+ crash even in case of corrupted input.
+*/
+
+struct internal_state;
+
+typedef struct z_stream_s {
+ const Byte *next_in; /* next input byte */
+ uInt avail_in; /* number of bytes available at next_in */
+ uLong total_in; /* total nb of input bytes read so far */
+
+ Byte *next_out; /* next output byte should be put there */
+ uInt avail_out; /* remaining free space at next_out */
+ uLong total_out; /* total nb of bytes output so far */
+
+ char *msg; /* last error message, NULL if no error */
+ struct internal_state *state; /* not visible by applications */
+
+ void *workspace; /* memory allocated for this stream */
+
+ int data_type; /* best guess about the data type: ascii or binary */
+ uLong adler; /* adler32 value of the uncompressed data */
+ uLong reserved; /* reserved for future use */
+} z_stream;
+
+typedef z_stream *z_streamp;
+
+/*
+ The application must update next_in and avail_in when avail_in has
+ dropped to zero. It must update next_out and avail_out when avail_out
+ has dropped to zero. The application must initialize zalloc, zfree and
+ opaque before calling the init function. All other fields are set by the
+ compression library and must not be updated by the application.
+
+ The opaque value provided by the application will be passed as the first
+ parameter for calls of zalloc and zfree. This can be useful for custom
+ memory management. The compression library attaches no meaning to the
+ opaque value.
+
+ zalloc must return NULL if there is not enough memory for the object.
+ If zlib is used in a multi-threaded application, zalloc and zfree must be
+ thread safe.
+
+ On 16-bit systems, the functions zalloc and zfree must be able to allocate
+ exactly 65536 bytes, but will not be required to allocate more than this
+ if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
+ pointers returned by zalloc for objects of exactly 65536 bytes *must*
+ have their offset normalized to zero. The default allocation function
+ provided by this library ensures this (see zutil.c). To reduce memory
+ requirements and avoid any allocation of 64K objects, at the expense of
+ compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
+
+ The fields total_in and total_out can be used for statistics or
+ progress reports. After compression, total_in holds the total size of
+ the uncompressed data and may be saved for use in the decompressor
+ (particularly if the decompressor wants to decompress everything in
+ a single step).
+*/
+
+ /* constants */
+
+#define Z_NO_FLUSH 0
+#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */
+#define Z_PACKET_FLUSH 2
+#define Z_SYNC_FLUSH 3
+#define Z_FULL_FLUSH 4
+#define Z_FINISH 5
+#define Z_BLOCK 6 /* Only for inflate at present */
+/* Allowed flush values; see deflate() and inflate() below for details */
+
+#define Z_OK 0
+#define Z_STREAM_END 1
+#define Z_NEED_DICT 2
+#define Z_ERRNO (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR (-3)
+#define Z_MEM_ERROR (-4)
+#define Z_BUF_ERROR (-5)
+#define Z_VERSION_ERROR (-6)
+/* Return codes for the compression/decompression functions. Negative
+ * values are errors, positive values are used for special but normal events.
+ */
+
+#define Z_NO_COMPRESSION 0
+#define Z_BEST_SPEED 1
+#define Z_BEST_COMPRESSION 9
+#define Z_DEFAULT_COMPRESSION (-1)
+/* compression levels */
+
+#define Z_FILTERED 1
+#define Z_HUFFMAN_ONLY 2
+#define Z_DEFAULT_STRATEGY 0
+/* compression strategy; see deflateInit2() below for details */
+
+#define Z_BINARY 0
+#define Z_ASCII 1
+#define Z_UNKNOWN 2
+/* Possible values of the data_type field */
+
+#define Z_DEFLATED 8
+/* The deflate compression method (the only one supported in this version) */
+
+ /* basic functions */
+
+extern int zlib_deflate_workspacesize (int windowBits, int memLevel);
+/*
+ Returns the number of bytes that needs to be allocated for a per-
+ stream workspace with the specified parameters. A pointer to this
+ number of bytes should be returned in stream->workspace before
+ you call zlib_deflateInit() or zlib_deflateInit2(). If you call
+ zlib_deflateInit(), specify windowBits = MAX_WBITS and memLevel =
+ MAX_MEM_LEVEL here. If you call zlib_deflateInit2(), the windowBits
+ and memLevel parameters passed to zlib_deflateInit2() must not
+ exceed those passed here.
+*/
+
+/*
+extern int deflateInit (z_streamp strm, int level);
+
+ Initializes the internal stream state for compression. The fields
+ zalloc, zfree and opaque must be initialized before by the caller.
+ If zalloc and zfree are set to NULL, deflateInit updates them to
+ use default allocation functions.
+
+ The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
+ 1 gives best speed, 9 gives best compression, 0 gives no compression at
+ all (the input data is simply copied a block at a time).
+ Z_DEFAULT_COMPRESSION requests a default compromise between speed and
+ compression (currently equivalent to level 6).
+
+ deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_STREAM_ERROR if level is not a valid compression level,
+ Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
+ with the version assumed by the caller (ZLIB_VERSION).
+ msg is set to null if there is no error message. deflateInit does not
+ perform any compression: this will be done by deflate().
+*/
+
+
+extern int zlib_deflate (z_streamp strm, int flush);
+/*
+ deflate compresses as much data as possible, and stops when the input
+ buffer becomes empty or the output buffer becomes full. It may introduce some
+ output latency (reading input without producing any output) except when
+ forced to flush.
+
+ The detailed semantics are as follows. deflate performs one or both of the
+ following actions:
+
+ - Compress more input starting at next_in and update next_in and avail_in
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), next_in and avail_in are updated and
+ processing will resume at this point for the next call of deflate().
+
+ - Provide more output starting at next_out and update next_out and avail_out
+ accordingly. This action is forced if the parameter flush is non zero.
+ Forcing flush frequently degrades the compression ratio, so this parameter
+ should be set only when necessary (in interactive applications).
+ Some output may be provided even if flush is not set.
+
+ Before the call of deflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming
+ more output, and updating avail_in or avail_out accordingly; avail_out
+ should never be zero before the call. The application can consume the
+ compressed output when it wants, for example when the output buffer is full
+ (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
+ and with zero avail_out, it must be called again after making room in the
+ output buffer because there might be more output pending.
+
+ If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
+ flushed to the output buffer and the output is aligned on a byte boundary, so
+ that the decompressor can get all input data available so far. (In particular
+ avail_in is zero after the call if enough output space has been provided
+ before the call.) Flushing may degrade compression for some compression
+ algorithms and so it should be used only when necessary.
+
+ If flush is set to Z_FULL_FLUSH, all output is flushed as with
+ Z_SYNC_FLUSH, and the compression state is reset so that decompression can
+ restart from this point if previous compressed data has been damaged or if
+ random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
+ the compression.
+
+ If deflate returns with avail_out == 0, this function must be called again
+ with the same value of the flush parameter and more output space (updated
+ avail_out), until the flush is complete (deflate returns with non-zero
+ avail_out).
+
+ If the parameter flush is set to Z_FINISH, pending input is processed,
+ pending output is flushed and deflate returns with Z_STREAM_END if there
+ was enough output space; if deflate returns with Z_OK, this function must be
+ called again with Z_FINISH and more output space (updated avail_out) but no
+ more input data, until it returns with Z_STREAM_END or an error. After
+ deflate has returned Z_STREAM_END, the only possible operations on the
+ stream are deflateReset or deflateEnd.
+
+ Z_FINISH can be used immediately after deflateInit if all the compression
+ is to be done in a single step. In this case, avail_out must be at least
+ 0.1% larger than avail_in plus 12 bytes. If deflate does not return
+ Z_STREAM_END, then it must be called again as described above.
+
+ deflate() sets strm->adler to the adler32 checksum of all input read
+ so far (that is, total_in bytes).
+
+ deflate() may update data_type if it can make a good guess about
+ the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
+ binary. This field is only for information purposes and does not affect
+ the compression algorithm in any manner.
+
+ deflate() returns Z_OK if some progress has been made (more input
+ processed or more output produced), Z_STREAM_END if all input has been
+ consumed and all output has been produced (only when flush is set to
+ Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
+ if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible
+ (for example avail_in or avail_out was zero).
+*/
+
+
+extern int zlib_deflateEnd (z_streamp strm);
+/*
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any
+ pending output.
+
+ deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
+ stream state was inconsistent, Z_DATA_ERROR if the stream was freed
+ prematurely (some input or output was discarded). In the error case,
+ msg may be set but then points to a static string (which must not be
+ deallocated).
+*/
+
+
+extern int zlib_inflate_workspacesize (void);
+/*
+ Returns the number of bytes that needs to be allocated for a per-
+ stream workspace. A pointer to this number of bytes should be
+ returned in stream->workspace before calling zlib_inflateInit().
+*/
+
+/*
+extern int zlib_inflateInit (z_streamp strm);
+
+ Initializes the internal stream state for decompression. The fields
+ next_in, avail_in, and workspace must be initialized before by
+ the caller. If next_in is not NULL and avail_in is large enough (the exact
+ value depends on the compression method), inflateInit determines the
+ compression method from the zlib header and allocates all data structures
+ accordingly; otherwise the allocation will be deferred to the first call of
+ inflate. If zalloc and zfree are set to NULL, inflateInit updates them to
+ use default allocation functions.
+
+ inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+ version assumed by the caller. msg is set to null if there is no error
+ message. inflateInit does not perform any decompression apart from reading
+ the zlib header if present: this will be done by inflate(). (So next_in and
+ avail_in may be modified, but next_out and avail_out are unchanged.)
+*/
+
+
+extern int zlib_inflate (z_streamp strm, int flush);
+/*
+ inflate decompresses as much data as possible, and stops when the input
+ buffer becomes empty or the output buffer becomes full. It may introduce
+ some output latency (reading input without producing any output) except when
+ forced to flush.
+
+ The detailed semantics are as follows. inflate performs one or both of the
+ following actions:
+
+ - Decompress more input starting at next_in and update next_in and avail_in
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), next_in is updated and processing
+ will resume at this point for the next call of inflate().
+
+ - Provide more output starting at next_out and update next_out and avail_out
+ accordingly. inflate() provides as much output as possible, until there
+ is no more input data or no more space in the output buffer (see below
+ about the flush parameter).
+
+ Before the call of inflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming
+ more output, and updating the next_* and avail_* values accordingly.
+ The application can consume the uncompressed output when it wants, for
+ example when the output buffer is full (avail_out == 0), or after each
+ call of inflate(). If inflate returns Z_OK and with zero avail_out, it
+ must be called again after making room in the output buffer because there
+ might be more output pending.
+
+ The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH,
+ Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much
+ output as possible to the output buffer. Z_BLOCK requests that inflate() stop
+ if and when it gets to the next deflate block boundary. When decoding the
+ zlib or gzip format, this will cause inflate() to return immediately after
+ the header and before the first block. When doing a raw inflate, inflate()
+ will go ahead and process the first block, and will return when it gets to
+ the end of that block, or when it runs out of data.
+
+ The Z_BLOCK option assists in appending to or combining deflate streams.
+ Also to assist in this, on return inflate() will set strm->data_type to the
+ number of unused bits in the last byte taken from strm->next_in, plus 64
+ if inflate() is currently decoding the last block in the deflate stream,
+ plus 128 if inflate() returned immediately after decoding an end-of-block
+ code or decoding the complete header up to just before the first byte of the
+ deflate stream. The end-of-block will not be indicated until all of the
+ uncompressed data from that block has been written to strm->next_out. The
+ number of unused bits may in general be greater than seven, except when
+ bit 7 of data_type is set, in which case the number of unused bits will be
+ less than eight.
+
+ inflate() should normally be called until it returns Z_STREAM_END or an
+ error. However if all decompression is to be performed in a single step
+ (a single call of inflate), the parameter flush should be set to
+ Z_FINISH. In this case all pending input is processed and all pending
+ output is flushed; avail_out must be large enough to hold all the
+ uncompressed data. (The size of the uncompressed data may have been saved
+ by the compressor for this purpose.) The next operation on this stream must
+ be inflateEnd to deallocate the decompression state. The use of Z_FINISH
+ is never required, but can be used to inform inflate that a faster approach
+ may be used for the single inflate() call.
+
+ In this implementation, inflate() always flushes as much output as
+ possible to the output buffer, and always uses the faster approach on the
+ first call. So the only effect of the flush parameter in this implementation
+ is on the return value of inflate(), as noted below, or when it returns early
+ because Z_BLOCK is used.
+
+ If a preset dictionary is needed after this call (see inflateSetDictionary
+ below), inflate sets strm->adler to the adler32 checksum of the dictionary
+ chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
+ strm->adler to the adler32 checksum of all output produced so far (that is,
+ total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
+ below. At the end of the stream, inflate() checks that its computed adler32
+ checksum is equal to that saved by the compressor and returns Z_STREAM_END
+ only if the checksum is correct.
+
+ inflate() will decompress and check either zlib-wrapped or gzip-wrapped
+ deflate data. The header type is detected automatically. Any information
+ contained in the gzip header is not retained, so applications that need that
+ information should instead use raw inflate, see inflateInit2() below, or
+ inflateBack() and perform their own processing of the gzip header and
+ trailer.
+
+ inflate() returns Z_OK if some progress has been made (more input processed
+ or more output produced), Z_STREAM_END if the end of the compressed data has
+ been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+ preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+ corrupted (input stream not conforming to the zlib format or incorrect check
+ value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
+ if next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory,
+ Z_BUF_ERROR if no progress is possible or if there was not enough room in the
+ output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and
+ inflate() can be called again with more input and more output space to
+ continue decompressing. If Z_DATA_ERROR is returned, the application may then
+ call inflateSync() to look for a good compression block if a partial recovery
+ of the data is desired.
+*/
+
+
+extern int zlib_inflateEnd (z_streamp strm);
+/*
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any
+ pending output.
+
+ inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
+ was inconsistent. In the error case, msg may be set but then points to a
+ static string (which must not be deallocated).
+*/
+
+ /* Advanced functions */
+
+/*
+ The following functions are needed only in some special applications.
+*/
+
+/*
+extern int deflateInit2 (z_streamp strm,
+ int level,
+ int method,
+ int windowBits,
+ int memLevel,
+ int strategy);
+
+ This is another version of deflateInit with more compression options. The
+ fields next_in, zalloc, zfree and opaque must be initialized before by
+ the caller.
+
+ The method parameter is the compression method. It must be Z_DEFLATED in
+ this version of the library.
+
+ The windowBits parameter is the base two logarithm of the window size
+ (the size of the history buffer). It should be in the range 8..15 for this
+ version of the library. Larger values of this parameter result in better
+ compression at the expense of memory usage. The default value is 15 if
+ deflateInit is used instead.
+
+ The memLevel parameter specifies how much memory should be allocated
+ for the internal compression state. memLevel=1 uses minimum memory but
+ is slow and reduces compression ratio; memLevel=9 uses maximum memory
+ for optimal speed. The default value is 8. See zconf.h for total memory
+ usage as a function of windowBits and memLevel.
+
+ The strategy parameter is used to tune the compression algorithm. Use the
+ value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
+ filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no
+ string match). Filtered data consists mostly of small values with a
+ somewhat random distribution. In this case, the compression algorithm is
+ tuned to compress them better. The effect of Z_FILTERED is to force more
+ Huffman coding and less string matching; it is somewhat intermediate
+ between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects
+ the compression ratio but not the correctness of the compressed output even
+ if it is not set appropriately.
+
+ deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
+ method). msg is set to null if there is no error message. deflateInit2 does
+ not perform any compression: this will be done by deflate().
+*/
+
+#if 0
+extern int zlib_deflateSetDictionary (z_streamp strm,
+ const Byte *dictionary,
+ uInt dictLength);
+#endif
+/*
+ Initializes the compression dictionary from the given byte sequence
+ without producing any compressed output. This function must be called
+ immediately after deflateInit, deflateInit2 or deflateReset, before any
+ call of deflate. The compressor and decompressor must use exactly the same
+ dictionary (see inflateSetDictionary).
+
+ The dictionary should consist of strings (byte sequences) that are likely
+ to be encountered later in the data to be compressed, with the most commonly
+ used strings preferably put towards the end of the dictionary. Using a
+ dictionary is most useful when the data to be compressed is short and can be
+ predicted with good accuracy; the data can then be compressed better than
+ with the default empty dictionary.
+
+ Depending on the size of the compression data structures selected by
+ deflateInit or deflateInit2, a part of the dictionary may in effect be
+ discarded, for example if the dictionary is larger than the window size in
+ deflate or deflate2. Thus the strings most likely to be useful should be
+ put at the end of the dictionary, not at the front.
+
+ Upon return of this function, strm->adler is set to the Adler32 value
+ of the dictionary; the decompressor may later use this value to determine
+ which dictionary has been used by the compressor. (The Adler32 value
+ applies to the whole dictionary even if only a subset of the dictionary is
+ actually used by the compressor.)
+
+ deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
+ parameter is invalid (such as NULL dictionary) or the stream state is
+ inconsistent (for example if deflate has already been called for this stream
+ or if the compression method is bsort). deflateSetDictionary does not
+ perform any compression: this will be done by deflate().
+*/
+
+#if 0
+extern int zlib_deflateCopy (z_streamp dest, z_streamp source);
+#endif
+
+/*
+ Sets the destination stream as a complete copy of the source stream.
+
+ This function can be useful when several compression strategies will be
+ tried, for example when there are several ways of pre-processing the input
+ data with a filter. The streams that will be discarded should then be freed
+ by calling deflateEnd. Note that deflateCopy duplicates the internal
+ compression state which can be quite large, so this strategy is slow and
+ can consume lots of memory.
+
+ deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+ (such as zalloc being NULL). msg is left unchanged in both source and
+ destination.
+*/
+
+extern int zlib_deflateReset (z_streamp strm);
+/*
+ This function is equivalent to deflateEnd followed by deflateInit,
+ but does not free and reallocate all the internal compression state.
+ The stream will keep the same compression level and any other attributes
+ that may have been set by deflateInit2.
+
+ deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being NULL).
+*/
+
+static inline unsigned long deflateBound(unsigned long s)
+{
+ return s + ((s + 7) >> 3) + ((s + 63) >> 6) + 11;
+}
+
+#if 0
+extern int zlib_deflateParams (z_streamp strm, int level, int strategy);
+#endif
+/*
+ Dynamically update the compression level and compression strategy. The
+ interpretation of level and strategy is as in deflateInit2. This can be
+ used to switch between compression and straight copy of the input data, or
+ to switch to a different kind of input data requiring a different
+ strategy. If the compression level is changed, the input available so far
+ is compressed with the old level (and may be flushed); the new level will
+ take effect only at the next call of deflate().
+
+ Before the call of deflateParams, the stream state must be set as for
+ a call of deflate(), since the currently available input may have to
+ be compressed and flushed. In particular, strm->avail_out must be non-zero.
+
+ deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
+ stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
+ if strm->avail_out was zero.
+*/
+
+/*
+extern int inflateInit2 (z_streamp strm, int windowBits);
+
+ This is another version of inflateInit with an extra parameter. The
+ fields next_in, avail_in, zalloc, zfree and opaque must be initialized
+ before by the caller.
+
+ The windowBits parameter is the base two logarithm of the maximum window
+ size (the size of the history buffer). It should be in the range 8..15 for
+ this version of the library. The default value is 15 if inflateInit is used
+ instead. windowBits must be greater than or equal to the windowBits value
+ provided to deflateInit2() while compressing, or it must be equal to 15 if
+ deflateInit2() was not used. If a compressed stream with a larger window
+ size is given as input, inflate() will return with the error code
+ Z_DATA_ERROR instead of trying to allocate a larger window.
+
+ windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
+ determines the window size. inflate() will then process raw deflate data,
+ not looking for a zlib or gzip header, not generating a check value, and not
+ looking for any check values for comparison at the end of the stream. This
+ is for use with other formats that use the deflate compressed data format
+ such as zip. Those formats provide their own check values. If a custom
+ format is developed using the raw deflate format for compressed data, it is
+ recommended that a check value such as an adler32 or a crc32 be applied to
+ the uncompressed data as is done in the zlib, gzip, and zip formats. For
+ most applications, the zlib format should be used as is. Note that comments
+ above on the use in deflateInit2() applies to the magnitude of windowBits.
+
+ windowBits can also be greater than 15 for optional gzip decoding. Add
+ 32 to windowBits to enable zlib and gzip decoding with automatic header
+ detection, or add 16 to decode only the gzip format (the zlib format will
+ return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is
+ a crc32 instead of an adler32.
+
+ inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_STREAM_ERROR if a parameter is invalid (such as a null strm). msg
+ is set to null if there is no error message. inflateInit2 does not perform
+ any decompression apart from reading the zlib header if present: this will
+ be done by inflate(). (So next_in and avail_in may be modified, but next_out
+ and avail_out are unchanged.)
+*/
+
+extern int zlib_inflateSetDictionary (z_streamp strm,
+ const Byte *dictionary,
+ uInt dictLength);
+/*
+ Initializes the decompression dictionary from the given uncompressed byte
+ sequence. This function must be called immediately after a call of inflate,
+ if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
+ can be determined from the adler32 value returned by that call of inflate.
+ The compressor and decompressor must use exactly the same dictionary (see
+ deflateSetDictionary). For raw inflate, this function can be called
+ immediately after inflateInit2() or inflateReset() and before any call of
+ inflate() to set the dictionary. The application must insure that the
+ dictionary that was used for compression is provided.
+
+ inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
+ parameter is invalid (such as NULL dictionary) or the stream state is
+ inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
+ expected one (incorrect adler32 value). inflateSetDictionary does not
+ perform any decompression: this will be done by subsequent calls of
+ inflate().
+*/
+
+#if 0
+extern int zlib_inflateSync (z_streamp strm);
+#endif
+/*
+ Skips invalid compressed data until a full flush point (see above the
+ description of deflate with Z_FULL_FLUSH) can be found, or until all
+ available input is skipped. No output is provided.
+
+ inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
+ if no more input was provided, Z_DATA_ERROR if no flush point has been found,
+ or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
+ case, the application may save the current current value of total_in which
+ indicates where valid compressed data was found. In the error case, the
+ application may repeatedly call inflateSync, providing more input each time,
+ until success or end of the input data.
+*/
+
+extern int zlib_inflateReset (z_streamp strm);
+/*
+ This function is equivalent to inflateEnd followed by inflateInit,
+ but does not free and reallocate all the internal decompression state.
+ The stream will keep attributes that may have been set by inflateInit2.
+
+ inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being NULL).
+*/
+
+extern int zlib_inflateIncomp (z_stream *strm);
+/*
+ This function adds the data at next_in (avail_in bytes) to the output
+ history without performing any output. There must be no pending output,
+ and the decompressor must be expecting to see the start of a block.
+ Calling this function is equivalent to decompressing a stored block
+ containing the data at next_in (except that the data is not output).
+*/
+
+#define zlib_deflateInit(strm, level) \
+ zlib_deflateInit2((strm), (level), Z_DEFLATED, MAX_WBITS, \
+ DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY)
+#define zlib_inflateInit(strm) \
+ zlib_inflateInit2((strm), DEF_WBITS)
+
+extern int zlib_deflateInit2(z_streamp strm, int level, int method,
+ int windowBits, int memLevel,
+ int strategy);
+extern int zlib_inflateInit2(z_streamp strm, int windowBits);
+
+#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)
+ struct internal_state {int dummy;}; /* hack for buggy compilers */
+#endif
+
+/* Utility function: initialize zlib, unpack binary blob, clean up zlib,
+ * return len or negative error code. */
+extern int zlib_inflate_blob(void *dst, unsigned dst_sz, const void *src, unsigned src_sz);
+
+#endif /* _ZLIB_H */
diff --git a/include/linux/zutil.h b/include/linux/zutil.h
new file mode 100644
index 0000000..6adfa9a
--- /dev/null
+++ b/include/linux/zutil.h
@@ -0,0 +1,106 @@
+/* zutil.h -- internal interface and configuration of the compression library
+ * Copyright (C) 1995-1998 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* @(#) $Id: zutil.h,v 1.1 2000/01/01 03:32:23 davem Exp $ */
+
+#ifndef _Z_UTIL_H
+#define _Z_UTIL_H
+
+#include <linux/zlib.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+typedef unsigned char uch;
+typedef unsigned short ush;
+typedef unsigned long ulg;
+
+ /* common constants */
+
+#define STORED_BLOCK 0
+#define STATIC_TREES 1
+#define DYN_TREES 2
+/* The three kinds of block type */
+
+#define MIN_MATCH 3
+#define MAX_MATCH 258
+/* The minimum and maximum match lengths */
+
+#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
+
+ /* target dependencies */
+
+ /* Common defaults */
+
+#ifndef OS_CODE
+# define OS_CODE 0x03 /* assume Unix */
+#endif
+
+ /* functions */
+
+typedef uLong (*check_func) (uLong check, const Byte *buf,
+ uInt len);
+
+
+ /* checksum functions */
+
+#define BASE 65521L /* largest prime smaller than 65536 */
+#define NMAX 5552
+/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
+
+#define DO1(buf,i) {s1 += buf[i]; s2 += s1;}
+#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1);
+#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2);
+#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4);
+#define DO16(buf) DO8(buf,0); DO8(buf,8);
+
+/* ========================================================================= */
+/*
+ Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+ return the updated checksum. If buf is NULL, this function returns
+ the required initial value for the checksum.
+ An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+ much faster. Usage example:
+
+ uLong adler = adler32(0L, NULL, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ adler = adler32(adler, buffer, length);
+ }
+ if (adler != original_adler) error();
+*/
+static inline uLong zlib_adler32(uLong adler,
+ const Byte *buf,
+ uInt len)
+{
+ unsigned long s1 = adler & 0xffff;
+ unsigned long s2 = (adler >> 16) & 0xffff;
+ int k;
+
+ if (buf == NULL) return 1L;
+
+ while (len > 0) {
+ k = len < NMAX ? len : NMAX;
+ len -= k;
+ while (k >= 16) {
+ DO16(buf);
+ buf += 16;
+ k -= 16;
+ }
+ if (k != 0) do {
+ s1 += *buf++;
+ s2 += s1;
+ } while (--k);
+ s1 %= BASE;
+ s2 %= BASE;
+ }
+ return (s2 << 16) | s1;
+}
+
+#endif /* _Z_UTIL_H */
diff --git a/lib/Makefile b/lib/Makefile
index b02191a..f0abc21 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -16,7 +16,7 @@ obj-y += stringlist.o
obj-y += recursive_action.o
obj-y += make_directory.o
obj-$(CONFIG_BZLIB) += decompress_bunzip2.o
-obj-$(CONFIG_ZLIB) += zlib.o gunzip.o
+obj-$(CONFIG_ZLIB) += decompress_inflate.o zlib_inflate/
obj-$(CONFIG_CMDLINE_EDITING) += readline.o
obj-$(CONFIG_SIMPLE_READLINE) += readline_simple.o
obj-$(CONFIG_GLOB) += fnmatch.o
diff --git a/lib/decompress_inflate.c b/lib/decompress_inflate.c
new file mode 100644
index 0000000..d246d4d
--- /dev/null
+++ b/lib/decompress_inflate.c
@@ -0,0 +1,183 @@
+#ifdef STATIC
+/* Pre-boot environment: included */
+
+/* prevent inclusion of _LINUX_KERNEL_H in pre-boot environment: lots
+ * errors about console_printk etc... on ARM */
+#define _LINUX_KERNEL_H
+
+#include "zlib_inflate/inftrees.c"
+#include "zlib_inflate/inffast.c"
+#include "zlib_inflate/inflate.c"
+
+#else /* STATIC */
+/* initramfs et al: linked */
+
+#include <linux/zutil.h>
+#include <common.h>
+#include <malloc.h>
+
+#include "zlib_inflate/inftrees.h"
+#include "zlib_inflate/inffast.h"
+#include "zlib_inflate/inflate.h"
+
+#include "zlib_inflate/infutil.h"
+
+#endif /* STATIC */
+
+#define GZIP_IOBUF_SIZE (16*1024)
+
+static int nofill(void *buffer, unsigned int len)
+{
+ return -1;
+}
+
+/* Included from initramfs et al code */
+int gunzip(unsigned char *buf, int len,
+ int(*fill)(void*, unsigned int),
+ int(*flush)(void*, unsigned int),
+ unsigned char *out_buf,
+ int *pos,
+ void(*error)(char *x)) {
+ u8 *zbuf;
+ struct z_stream_s *strm;
+ int rc;
+ size_t out_len;
+
+ rc = -1;
+ if (flush) {
+ out_len = 0x8000; /* 32 K */
+ out_buf = malloc(out_len);
+ } else {
+ out_len = 0x7fffffff; /* no limit */
+ }
+ if (!out_buf) {
+ error("Out of memory while allocating output buffer");
+ goto gunzip_nomem1;
+ }
+
+ if (buf)
+ zbuf = buf;
+ else {
+ zbuf = malloc(GZIP_IOBUF_SIZE);
+ len = 0;
+ }
+ if (!zbuf) {
+ error("Out of memory while allocating input buffer");
+ goto gunzip_nomem2;
+ }
+
+ strm = malloc(sizeof(*strm));
+ if (strm == NULL) {
+ error("Out of memory while allocating z_stream");
+ goto gunzip_nomem3;
+ }
+
+ strm->workspace = malloc(flush ? zlib_inflate_workspacesize() :
+ sizeof(struct inflate_state));
+ if (strm->workspace == NULL) {
+ error("Out of memory while allocating workspace");
+ goto gunzip_nomem4;
+ }
+
+ if (!fill)
+ fill = nofill;
+
+ if (len == 0)
+ len = fill(zbuf, GZIP_IOBUF_SIZE);
+
+ /* verify the gzip header */
+ if (len < 10 ||
+ zbuf[0] != 0x1f || zbuf[1] != 0x8b || zbuf[2] != 0x08) {
+ if (pos)
+ *pos = 0;
+ error("Not a gzip file");
+ goto gunzip_5;
+ }
+
+ /* skip over gzip header (1f,8b,08... 10 bytes total +
+ * possible asciz filename)
+ */
+ strm->next_in = zbuf + 10;
+ strm->avail_in = len - 10;
+ /* skip over asciz filename */
+ if (zbuf[3] & 0x8) {
+ do {
+ /*
+ * If the filename doesn't fit into the buffer,
+ * the file is very probably corrupt. Don't try
+ * to read more data.
+ */
+ if (strm->avail_in == 0) {
+ error("header error");
+ goto gunzip_5;
+ }
+ --strm->avail_in;
+ } while (*strm->next_in++);
+ }
+
+ strm->next_out = out_buf;
+ strm->avail_out = out_len;
+
+ rc = zlib_inflateInit2(strm, -MAX_WBITS);
+
+ if (!flush) {
+ WS(strm)->inflate_state.wsize = 0;
+ WS(strm)->inflate_state.window = NULL;
+ }
+
+ while (rc == Z_OK) {
+ if (strm->avail_in == 0) {
+ /* TODO: handle case where both pos and fill are set */
+ len = fill(zbuf, GZIP_IOBUF_SIZE);
+ if (len < 0) {
+ rc = -1;
+ error("read error");
+ break;
+ }
+ strm->next_in = zbuf;
+ strm->avail_in = len;
+ }
+ rc = zlib_inflate(strm, 0);
+
+ /* Write any data generated */
+ if (flush && strm->next_out > out_buf) {
+ int l = strm->next_out - out_buf;
+ if (l != flush(out_buf, l)) {
+ rc = -1;
+ error("write error");
+ break;
+ }
+ strm->next_out = out_buf;
+ strm->avail_out = out_len;
+ }
+
+ /* after Z_FINISH, only Z_STREAM_END is "we unpacked it all" */
+ if (rc == Z_STREAM_END) {
+ rc = 0;
+ break;
+ } else if (rc != Z_OK) {
+ error("uncompression error");
+ rc = -1;
+ }
+ }
+
+ zlib_inflateEnd(strm);
+ if (pos)
+ /* add + 8 to skip over trailer */
+ *pos = strm->next_in - zbuf+8;
+
+gunzip_5:
+ free(strm->workspace);
+gunzip_nomem4:
+ free(strm);
+gunzip_nomem3:
+ if (!buf)
+ free(zbuf);
+gunzip_nomem2:
+ if (flush)
+ free(out_buf);
+gunzip_nomem1:
+ return rc; /* returns Z_OK (0) if successful */
+}
+
+#define decompress gunzip
diff --git a/lib/zlib_inflate/Makefile b/lib/zlib_inflate/Makefile
new file mode 100644
index 0000000..8e95fcd
--- /dev/null
+++ b/lib/zlib_inflate/Makefile
@@ -0,0 +1,18 @@
+#
+# This is a modified version of zlib, which does all memory
+# allocation ahead of time.
+#
+# This is only the decompression, see zlib_deflate for the
+# the compression
+#
+# Decompression needs to be serialized for each memory
+# allocation.
+#
+# (The upsides of the simplification is that you can't get in
+# any nasty situations wrt memory management, and that the
+# uncompression can be done without blocking on allocation).
+#
+
+obj-$(CONFIG_ZLIB) += zlib_inflate.o
+
+zlib_inflate-objs := inffast.o inflate.o inftrees.o
diff --git a/lib/zlib_inflate/inffast.c b/lib/zlib_inflate/inffast.c
new file mode 100644
index 0000000..2c13ecc
--- /dev/null
+++ b/lib/zlib_inflate/inffast.c
@@ -0,0 +1,363 @@
+/* inffast.c -- fast decoding
+ * Copyright (C) 1995-2004 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include <linux/zutil.h>
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+#ifndef ASMINF
+
+/* Allow machine dependent optimization for post-increment or pre-increment.
+ Based on testing to date,
+ Pre-increment preferred for:
+ - PowerPC G3 (Adler)
+ - MIPS R5000 (Randers-Pehrson)
+ Post-increment preferred for:
+ - none
+ No measurable difference:
+ - Pentium III (Anderson)
+ - M68060 (Nikl)
+ */
+union uu {
+ unsigned short us;
+ unsigned char b[2];
+};
+
+/* Endian independed version */
+static inline unsigned short
+get_unaligned16(const unsigned short *p)
+{
+ union uu mm;
+ unsigned char *b = (unsigned char *)p;
+
+ mm.b[0] = b[0];
+ mm.b[1] = b[1];
+ return mm.us;
+}
+
+#ifdef POSTINC
+# define OFF 0
+# define PUP(a) *(a)++
+# define UP_UNALIGNED(a) get_unaligned16((a)++)
+#else
+# define OFF 1
+# define PUP(a) *++(a)
+# define UP_UNALIGNED(a) get_unaligned16(++(a))
+#endif
+
+/*
+ Decode literal, length, and distance codes and write out the resulting
+ literal and match bytes until either not enough input or output is
+ available, an end-of-block is encountered, or a data error is encountered.
+ When large enough input and output buffers are supplied to inflate(), for
+ example, a 16K input buffer and a 64K output buffer, more than 95% of the
+ inflate execution time is spent in this routine.
+
+ Entry assumptions:
+
+ state->mode == LEN
+ strm->avail_in >= 6
+ strm->avail_out >= 258
+ start >= strm->avail_out
+ state->bits < 8
+
+ On return, state->mode is one of:
+
+ LEN -- ran out of enough output space or enough available input
+ TYPE -- reached end of block code, inflate() to interpret next block
+ BAD -- error in block data
+
+ Notes:
+
+ - The maximum input bits used by a length/distance pair is 15 bits for the
+ length code, 5 bits for the length extra, 15 bits for the distance code,
+ and 13 bits for the distance extra. This totals 48 bits, or six bytes.
+ Therefore if strm->avail_in >= 6, then there is enough input to avoid
+ checking for available input while decoding.
+
+ - The maximum bytes that a single length/distance pair can output is 258
+ bytes, which is the maximum length that can be coded. inflate_fast()
+ requires strm->avail_out >= 258 for each loop to avoid checking for
+ output space.
+
+ - @start: inflate()'s starting value for strm->avail_out
+ */
+void inflate_fast(z_streamp strm, unsigned start)
+{
+ struct inflate_state *state;
+ const unsigned char *in; /* local strm->next_in */
+ const unsigned char *last; /* while in < last, enough input available */
+ unsigned char *out; /* local strm->next_out */
+ unsigned char *beg; /* inflate()'s initial strm->next_out */
+ unsigned char *end; /* while out < end, enough space available */
+#ifdef INFLATE_STRICT
+ unsigned dmax; /* maximum distance from zlib header */
+#endif
+ unsigned wsize; /* window size or zero if not using window */
+ unsigned whave; /* valid bytes in the window */
+ unsigned write; /* window write index */
+ unsigned char *window; /* allocated sliding window, if wsize != 0 */
+ unsigned long hold; /* local strm->hold */
+ unsigned bits; /* local strm->bits */
+ code const *lcode; /* local strm->lencode */
+ code const *dcode; /* local strm->distcode */
+ unsigned lmask; /* mask for first level of length codes */
+ unsigned dmask; /* mask for first level of distance codes */
+ code this; /* retrieved table entry */
+ unsigned op; /* code bits, operation, extra bits, or */
+ /* window position, window bytes to copy */
+ unsigned len; /* match length, unused bytes */
+ unsigned dist; /* match distance */
+ unsigned char *from; /* where to copy match from */
+
+ /* copy state to local variables */
+ state = (struct inflate_state *)strm->state;
+ in = strm->next_in - OFF;
+ last = in + (strm->avail_in - 5);
+ out = strm->next_out - OFF;
+ beg = out - (start - strm->avail_out);
+ end = out + (strm->avail_out - 257);
+#ifdef INFLATE_STRICT
+ dmax = state->dmax;
+#endif
+ wsize = state->wsize;
+ whave = state->whave;
+ write = state->write;
+ window = state->window;
+ hold = state->hold;
+ bits = state->bits;
+ lcode = state->lencode;
+ dcode = state->distcode;
+ lmask = (1U << state->lenbits) - 1;
+ dmask = (1U << state->distbits) - 1;
+
+ /* decode literals and length/distances until end-of-block or not enough
+ input data or output space */
+ do {
+ if (bits < 15) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ }
+ this = lcode[hold & lmask];
+ dolen:
+ op = (unsigned)(this.bits);
+ hold >>= op;
+ bits -= op;
+ op = (unsigned)(this.op);
+ if (op == 0) { /* literal */
+ PUP(out) = (unsigned char)(this.val);
+ }
+ else if (op & 16) { /* length base */
+ len = (unsigned)(this.val);
+ op &= 15; /* number of extra bits */
+ if (op) {
+ if (bits < op) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ }
+ len += (unsigned)hold & ((1U << op) - 1);
+ hold >>= op;
+ bits -= op;
+ }
+ if (bits < 15) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ }
+ this = dcode[hold & dmask];
+ dodist:
+ op = (unsigned)(this.bits);
+ hold >>= op;
+ bits -= op;
+ op = (unsigned)(this.op);
+ if (op & 16) { /* distance base */
+ dist = (unsigned)(this.val);
+ op &= 15; /* number of extra bits */
+ if (bits < op) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ if (bits < op) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ }
+ }
+ dist += (unsigned)hold & ((1U << op) - 1);
+#ifdef INFLATE_STRICT
+ if (dist > dmax) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ hold >>= op;
+ bits -= op;
+ op = (unsigned)(out - beg); /* max distance in output */
+ if (dist > op) { /* see if copy from window */
+ op = dist - op; /* distance back in window */
+ if (op > whave) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+ from = window - OFF;
+ if (write == 0) { /* very common case */
+ from += wsize - op;
+ if (op < len) { /* some from window */
+ len -= op;
+ do {
+ PUP(out) = PUP(from);
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ else if (write < op) { /* wrap around window */
+ from += wsize + write - op;
+ op -= write;
+ if (op < len) { /* some from end of window */
+ len -= op;
+ do {
+ PUP(out) = PUP(from);
+ } while (--op);
+ from = window - OFF;
+ if (write < len) { /* some from start of window */
+ op = write;
+ len -= op;
+ do {
+ PUP(out) = PUP(from);
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ }
+ else { /* contiguous in window */
+ from += write - op;
+ if (op < len) { /* some from window */
+ len -= op;
+ do {
+ PUP(out) = PUP(from);
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ while (len > 2) {
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ len -= 3;
+ }
+ if (len) {
+ PUP(out) = PUP(from);
+ if (len > 1)
+ PUP(out) = PUP(from);
+ }
+ }
+ else {
+ unsigned short *sout;
+ unsigned long loops;
+
+ from = out - dist; /* copy direct from output */
+ /* minimum length is three */
+ /* Align out addr */
+ if (!((long)(out - 1 + OFF) & 1)) {
+ PUP(out) = PUP(from);
+ len--;
+ }
+ sout = (unsigned short *)(out - OFF);
+ if (dist > 2) {
+ unsigned short *sfrom;
+
+ sfrom = (unsigned short *)(from - OFF);
+ loops = len >> 1;
+ do
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+ PUP(sout) = PUP(sfrom);
+#else
+ PUP(sout) = UP_UNALIGNED(sfrom);
+#endif
+ while (--loops);
+ out = (unsigned char *)sout + OFF;
+ from = (unsigned char *)sfrom + OFF;
+ } else { /* dist == 1 or dist == 2 */
+ unsigned short pat16;
+
+ pat16 = *(sout-1+OFF);
+ if (dist == 1) {
+ union uu mm;
+ /* copy one char pattern to both bytes */
+ mm.us = pat16;
+ mm.b[0] = mm.b[1];
+ pat16 = mm.us;
+ }
+ loops = len >> 1;
+ do
+ PUP(sout) = pat16;
+ while (--loops);
+ out = (unsigned char *)sout + OFF;
+ }
+ if (len & 1)
+ PUP(out) = PUP(from);
+ }
+ }
+ else if ((op & 64) == 0) { /* 2nd level distance code */
+ this = dcode[this.val + (hold & ((1U << op) - 1))];
+ goto dodist;
+ }
+ else {
+ strm->msg = (char *)"invalid distance code";
+ state->mode = BAD;
+ break;
+ }
+ }
+ else if ((op & 64) == 0) { /* 2nd level length code */
+ this = lcode[this.val + (hold & ((1U << op) - 1))];
+ goto dolen;
+ }
+ else if (op & 32) { /* end-of-block */
+ state->mode = TYPE;
+ break;
+ }
+ else {
+ strm->msg = (char *)"invalid literal/length code";
+ state->mode = BAD;
+ break;
+ }
+ } while (in < last && out < end);
+
+ /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+ len = bits >> 3;
+ in -= len;
+ bits -= len << 3;
+ hold &= (1U << bits) - 1;
+
+ /* update state and return */
+ strm->next_in = in + OFF;
+ strm->next_out = out + OFF;
+ strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
+ strm->avail_out = (unsigned)(out < end ?
+ 257 + (end - out) : 257 - (out - end));
+ state->hold = hold;
+ state->bits = bits;
+ return;
+}
+
+/*
+ inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
+ - Using bit fields for code structure
+ - Different op definition to avoid & for extra bits (do & for table bits)
+ - Three separate decoding do-loops for direct, window, and write == 0
+ - Special case for distance > 1 copies to do overlapped load and store copy
+ - Explicit branch predictions (based on measured branch probabilities)
+ - Deferring match copy and interspersed it with decoding subsequent codes
+ - Swapping literal/length else
+ - Swapping window/direct else
+ - Larger unrolled copy loops (three is about right)
+ - Moving len -= 3 statement into middle of loop
+ */
+
+#endif /* !ASMINF */
diff --git a/lib/zlib_inflate/inffast.h b/lib/zlib_inflate/inffast.h
new file mode 100644
index 0000000..40315d9
--- /dev/null
+++ b/lib/zlib_inflate/inffast.h
@@ -0,0 +1,11 @@
+/* inffast.h -- header to use inffast.c
+ * Copyright (C) 1995-2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+void inflate_fast (z_streamp strm, unsigned start);
diff --git a/lib/zlib_inflate/inffixed.h b/lib/zlib_inflate/inffixed.h
new file mode 100644
index 0000000..75ed4b5
--- /dev/null
+++ b/lib/zlib_inflate/inffixed.h
@@ -0,0 +1,94 @@
+ /* inffixed.h -- table for decoding fixed codes
+ * Generated automatically by makefixed().
+ */
+
+ /* WARNING: this file should *not* be used by applications. It
+ is part of the implementation of the compression library and
+ is subject to change. Applications should only use zlib.h.
+ */
+
+ static const code lenfix[512] = {
+ {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48},
+ {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128},
+ {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59},
+ {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176},
+ {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20},
+ {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100},
+ {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8},
+ {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216},
+ {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76},
+ {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114},
+ {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},
+ {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148},
+ {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42},
+ {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86},
+ {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15},
+ {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236},
+ {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62},
+ {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
+ {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31},
+ {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162},
+ {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25},
+ {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105},
+ {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4},
+ {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202},
+ {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69},
+ {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125},
+ {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13},
+ {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195},
+ {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35},
+ {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91},
+ {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19},
+ {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246},
+ {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55},
+ {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135},
+ {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99},
+ {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190},
+ {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16},
+ {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96},
+ {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6},
+ {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209},
+ {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},
+ {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116},
+ {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4},
+ {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153},
+ {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44},
+ {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82},
+ {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11},
+ {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
+ {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58},
+ {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138},
+ {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51},
+ {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173},
+ {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30},
+ {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110},
+ {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0},
+ {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195},
+ {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65},
+ {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121},
+ {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},
+ {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258},
+ {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37},
+ {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93},
+ {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23},
+ {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251},
+ {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51},
+ {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
+ {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67},
+ {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183},
+ {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23},
+ {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103},
+ {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9},
+ {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223},
+ {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79},
+ {0,9,255}
+ };
+
+ static const code distfix[32] = {
+ {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025},
+ {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193},
+ {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385},
+ {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577},
+ {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073},
+ {22,5,193},{64,5,0}
+ };
diff --git a/lib/zlib_inflate/inflate.c b/lib/zlib_inflate/inflate.c
new file mode 100644
index 0000000..f5ce87b
--- /dev/null
+++ b/lib/zlib_inflate/inflate.c
@@ -0,0 +1,918 @@
+/* inflate.c -- zlib decompression
+ * Copyright (C) 1995-2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Based on zlib 1.2.3 but modified for the Linux Kernel by
+ * Richard Purdie <richard@openedhand.com>
+ *
+ * Changes mainly for static instead of dynamic memory allocation
+ *
+ */
+
+#include <linux/zutil.h>
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+#include "infutil.h"
+
+int zlib_inflate_workspacesize(void)
+{
+ return sizeof(struct inflate_workspace);
+}
+
+int zlib_inflateReset(z_streamp strm)
+{
+ struct inflate_state *state;
+
+ if (strm == NULL || strm->state == NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state *)strm->state;
+ strm->total_in = strm->total_out = state->total = 0;
+ strm->msg = NULL;
+ strm->adler = 1; /* to support ill-conceived Java test suite */
+ state->mode = HEAD;
+ state->last = 0;
+ state->havedict = 0;
+ state->dmax = 32768U;
+ state->hold = 0;
+ state->bits = 0;
+ state->lencode = state->distcode = state->next = state->codes;
+
+ /* Initialise Window */
+ state->wsize = 1U << state->wbits;
+ state->write = 0;
+ state->whave = 0;
+
+ return Z_OK;
+}
+
+#if 0
+int zlib_inflatePrime(z_streamp strm, int bits, int value)
+{
+ struct inflate_state *state;
+
+ if (strm == NULL || strm->state == NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state *)strm->state;
+ if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR;
+ value &= (1L << bits) - 1;
+ state->hold += value << state->bits;
+ state->bits += bits;
+ return Z_OK;
+}
+#endif
+
+int zlib_inflateInit2(z_streamp strm, int windowBits)
+{
+ struct inflate_state *state;
+
+ if (strm == NULL) return Z_STREAM_ERROR;
+ strm->msg = NULL; /* in case we return an error */
+
+ state = &WS(strm)->inflate_state;
+ strm->state = (struct internal_state *)state;
+
+ if (windowBits < 0) {
+ state->wrap = 0;
+ windowBits = -windowBits;
+ }
+ else {
+ state->wrap = (windowBits >> 4) + 1;
+ }
+ if (windowBits < 8 || windowBits > 15) {
+ return Z_STREAM_ERROR;
+ }
+ state->wbits = (unsigned)windowBits;
+ state->window = &WS(strm)->working_window[0];
+
+ return zlib_inflateReset(strm);
+}
+
+/*
+ Return state with length and distance decoding tables and index sizes set to
+ fixed code decoding. This returns fixed tables from inffixed.h.
+ */
+static void zlib_fixedtables(struct inflate_state *state)
+{
+# include "inffixed.h"
+ state->lencode = lenfix;
+ state->lenbits = 9;
+ state->distcode = distfix;
+ state->distbits = 5;
+}
+
+
+/*
+ Update the window with the last wsize (normally 32K) bytes written before
+ returning. This is only called when a window is already in use, or when
+ output has been written during this inflate call, but the end of the deflate
+ stream has not been reached yet. It is also called to window dictionary data
+ when a dictionary is loaded.
+
+ Providing output buffers larger than 32K to inflate() should provide a speed
+ advantage, since only the last 32K of output is copied to the sliding window
+ upon return from inflate(), and since all distances after the first 32K of
+ output will fall in the output data, making match copies simpler and faster.
+ The advantage may be dependent on the size of the processor's data caches.
+ */
+static void zlib_updatewindow(z_streamp strm, unsigned out)
+{
+ struct inflate_state *state;
+ unsigned copy, dist;
+
+ state = (struct inflate_state *)strm->state;
+
+ /* copy state->wsize or less output bytes into the circular window */
+ copy = out - strm->avail_out;
+ if (copy >= state->wsize) {
+ memcpy(state->window, strm->next_out - state->wsize, state->wsize);
+ state->write = 0;
+ state->whave = state->wsize;
+ }
+ else {
+ dist = state->wsize - state->write;
+ if (dist > copy) dist = copy;
+ memcpy(state->window + state->write, strm->next_out - copy, dist);
+ copy -= dist;
+ if (copy) {
+ memcpy(state->window, strm->next_out - copy, copy);
+ state->write = copy;
+ state->whave = state->wsize;
+ }
+ else {
+ state->write += dist;
+ if (state->write == state->wsize) state->write = 0;
+ if (state->whave < state->wsize) state->whave += dist;
+ }
+ }
+}
+
+
+/*
+ * At the end of a Deflate-compressed PPP packet, we expect to have seen
+ * a `stored' block type value but not the (zero) length bytes.
+ */
+/*
+ Returns true if inflate is currently at the end of a block generated by
+ Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
+ implementation to provide an additional safety check. PPP uses
+ Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored
+ block. When decompressing, PPP checks that at the end of input packet,
+ inflate is waiting for these length bytes.
+ */
+static int zlib_inflateSyncPacket(z_streamp strm)
+{
+ struct inflate_state *state;
+
+ if (strm == NULL || strm->state == NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state *)strm->state;
+
+ if (state->mode == STORED && state->bits == 0) {
+ state->mode = TYPE;
+ return Z_OK;
+ }
+ return Z_DATA_ERROR;
+}
+
+/* Macros for inflate(): */
+
+/* check function to use adler32() for zlib or crc32() for gzip */
+#define UPDATE(check, buf, len) zlib_adler32(check, buf, len)
+
+/* Load registers with state in inflate() for speed */
+#define LOAD() \
+ do { \
+ put = strm->next_out; \
+ left = strm->avail_out; \
+ next = strm->next_in; \
+ have = strm->avail_in; \
+ hold = state->hold; \
+ bits = state->bits; \
+ } while (0)
+
+/* Restore state from registers in inflate() */
+#define RESTORE() \
+ do { \
+ strm->next_out = put; \
+ strm->avail_out = left; \
+ strm->next_in = next; \
+ strm->avail_in = have; \
+ state->hold = hold; \
+ state->bits = bits; \
+ } while (0)
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+ do { \
+ hold = 0; \
+ bits = 0; \
+ } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflate()
+ if there is no input available. */
+#define PULLBYTE() \
+ do { \
+ if (have == 0) goto inf_leave; \
+ have--; \
+ hold += (unsigned long)(*next++) << bits; \
+ bits += 8; \
+ } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator. If there is
+ not enough available input to do that, then return from inflate(). */
+#define NEEDBITS(n) \
+ do { \
+ while (bits < (unsigned)(n)) \
+ PULLBYTE(); \
+ } while (0)
+
+/* Return the low n bits of the bit accumulator (n < 16) */
+#define BITS(n) \
+ ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+ do { \
+ hold >>= (n); \
+ bits -= (unsigned)(n); \
+ } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+ do { \
+ hold >>= bits & 7; \
+ bits -= bits & 7; \
+ } while (0)
+
+/* Reverse the bytes in a 32-bit value */
+#define REVERSE(q) \
+ ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
+ (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
+
+/*
+ inflate() uses a state machine to process as much input data and generate as
+ much output data as possible before returning. The state machine is
+ structured roughly as follows:
+
+ for (;;) switch (state) {
+ ...
+ case STATEn:
+ if (not enough input data or output space to make progress)
+ return;
+ ... make progress ...
+ state = STATEm;
+ break;
+ ...
+ }
+
+ so when inflate() is called again, the same case is attempted again, and
+ if the appropriate resources are provided, the machine proceeds to the
+ next state. The NEEDBITS() macro is usually the way the state evaluates
+ whether it can proceed or should return. NEEDBITS() does the return if
+ the requested bits are not available. The typical use of the BITS macros
+ is:
+
+ NEEDBITS(n);
+ ... do something with BITS(n) ...
+ DROPBITS(n);
+
+ where NEEDBITS(n) either returns from inflate() if there isn't enough
+ input left to load n bits into the accumulator, or it continues. BITS(n)
+ gives the low n bits in the accumulator. When done, DROPBITS(n) drops
+ the low n bits off the accumulator. INITBITS() clears the accumulator
+ and sets the number of available bits to zero. BYTEBITS() discards just
+ enough bits to put the accumulator on a byte boundary. After BYTEBITS()
+ and a NEEDBITS(8), then BITS(8) would return the next byte in the stream.
+
+ NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return
+ if there is no input available. The decoding of variable length codes uses
+ PULLBYTE() directly in order to pull just enough bytes to decode the next
+ code, and no more.
+
+ Some states loop until they get enough input, making sure that enough
+ state information is maintained to continue the loop where it left off
+ if NEEDBITS() returns in the loop. For example, want, need, and keep
+ would all have to actually be part of the saved state in case NEEDBITS()
+ returns:
+
+ case STATEw:
+ while (want < need) {
+ NEEDBITS(n);
+ keep[want++] = BITS(n);
+ DROPBITS(n);
+ }
+ state = STATEx;
+ case STATEx:
+
+ As shown above, if the next state is also the next case, then the break
+ is omitted.
+
+ A state may also return if there is not enough output space available to
+ complete that state. Those states are copying stored data, writing a
+ literal byte, and copying a matching string.
+
+ When returning, a "goto inf_leave" is used to update the total counters,
+ update the check value, and determine whether any progress has been made
+ during that inflate() call in order to return the proper return code.
+ Progress is defined as a change in either strm->avail_in or strm->avail_out.
+ When there is a window, goto inf_leave will update the window with the last
+ output written. If a goto inf_leave occurs in the middle of decompression
+ and there is no window currently, goto inf_leave will create one and copy
+ output to the window for the next call of inflate().
+
+ In this implementation, the flush parameter of inflate() only affects the
+ return code (per zlib.h). inflate() always writes as much as possible to
+ strm->next_out, given the space available and the provided input--the effect
+ documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers
+ the allocation of and copying into a sliding window until necessary, which
+ provides the effect documented in zlib.h for Z_FINISH when the entire input
+ stream available. So the only thing the flush parameter actually does is:
+ when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it
+ will return Z_BUF_ERROR if it has not reached the end of the stream.
+ */
+
+int zlib_inflate(z_streamp strm, int flush)
+{
+ struct inflate_state *state;
+ const unsigned char *next; /* next input */
+ unsigned char *put; /* next output */
+ unsigned have, left; /* available input and output */
+ unsigned long hold; /* bit buffer */
+ unsigned bits; /* bits in bit buffer */
+ unsigned in, out; /* save starting available input and output */
+ unsigned copy; /* number of stored or match bytes to copy */
+ unsigned char *from; /* where to copy match bytes from */
+ code this; /* current decoding table entry */
+ code last; /* parent table entry */
+ unsigned len; /* length to copy for repeats, bits to drop */
+ int ret; /* return code */
+ static const unsigned short order[19] = /* permutation of code lengths */
+ {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+ /* Do not check for strm->next_out == NULL here as ppc zImage
+ inflates to strm->next_out = 0 */
+
+ if (strm == NULL || strm->state == NULL ||
+ (strm->next_in == NULL && strm->avail_in != 0))
+ return Z_STREAM_ERROR;
+
+ state = (struct inflate_state *)strm->state;
+
+ if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */
+ LOAD();
+ in = have;
+ out = left;
+ ret = Z_OK;
+ for (;;)
+ switch (state->mode) {
+ case HEAD:
+ if (state->wrap == 0) {
+ state->mode = TYPEDO;
+ break;
+ }
+ NEEDBITS(16);
+ if (
+ ((BITS(8) << 8) + (hold >> 8)) % 31) {
+ strm->msg = (char *)"incorrect header check";
+ state->mode = BAD;
+ break;
+ }
+ if (BITS(4) != Z_DEFLATED) {
+ strm->msg = (char *)"unknown compression method";
+ state->mode = BAD;
+ break;
+ }
+ DROPBITS(4);
+ len = BITS(4) + 8;
+ if (len > state->wbits) {
+ strm->msg = (char *)"invalid window size";
+ state->mode = BAD;
+ break;
+ }
+ state->dmax = 1U << len;
+ strm->adler = state->check = zlib_adler32(0L, NULL, 0);
+ state->mode = hold & 0x200 ? DICTID : TYPE;
+ INITBITS();
+ break;
+ case DICTID:
+ NEEDBITS(32);
+ strm->adler = state->check = REVERSE(hold);
+ INITBITS();
+ state->mode = DICT;
+ case DICT:
+ if (state->havedict == 0) {
+ RESTORE();
+ return Z_NEED_DICT;
+ }
+ strm->adler = state->check = zlib_adler32(0L, NULL, 0);
+ state->mode = TYPE;
+ case TYPE:
+ if (flush == Z_BLOCK) goto inf_leave;
+ case TYPEDO:
+ if (state->last) {
+ BYTEBITS();
+ state->mode = CHECK;
+ break;
+ }
+ NEEDBITS(3);
+ state->last = BITS(1);
+ DROPBITS(1);
+ switch (BITS(2)) {
+ case 0: /* stored block */
+ state->mode = STORED;
+ break;
+ case 1: /* fixed block */
+ zlib_fixedtables(state);
+ state->mode = LEN; /* decode codes */
+ break;
+ case 2: /* dynamic block */
+ state->mode = TABLE;
+ break;
+ case 3:
+ strm->msg = (char *)"invalid block type";
+ state->mode = BAD;
+ }
+ DROPBITS(2);
+ break;
+ case STORED:
+ BYTEBITS(); /* go to byte boundary */
+ NEEDBITS(32);
+ if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+ strm->msg = (char *)"invalid stored block lengths";
+ state->mode = BAD;
+ break;
+ }
+ state->length = (unsigned)hold & 0xffff;
+ INITBITS();
+ state->mode = COPY;
+ case COPY:
+ copy = state->length;
+ if (copy) {
+ if (copy > have) copy = have;
+ if (copy > left) copy = left;
+ if (copy == 0) goto inf_leave;
+ memcpy(put, next, copy);
+ have -= copy;
+ next += copy;
+ left -= copy;
+ put += copy;
+ state->length -= copy;
+ break;
+ }
+ state->mode = TYPE;
+ break;
+ case TABLE:
+ NEEDBITS(14);
+ state->nlen = BITS(5) + 257;
+ DROPBITS(5);
+ state->ndist = BITS(5) + 1;
+ DROPBITS(5);
+ state->ncode = BITS(4) + 4;
+ DROPBITS(4);
+#ifndef PKZIP_BUG_WORKAROUND
+ if (state->nlen > 286 || state->ndist > 30) {
+ strm->msg = (char *)"too many length or distance symbols";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ state->have = 0;
+ state->mode = LENLENS;
+ case LENLENS:
+ while (state->have < state->ncode) {
+ NEEDBITS(3);
+ state->lens[order[state->have++]] = (unsigned short)BITS(3);
+ DROPBITS(3);
+ }
+ while (state->have < 19)
+ state->lens[order[state->have++]] = 0;
+ state->next = state->codes;
+ state->lencode = (code const *)(state->next);
+ state->lenbits = 7;
+ ret = zlib_inflate_table(CODES, state->lens, 19, &(state->next),
+ &(state->lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid code lengths set";
+ state->mode = BAD;
+ break;
+ }
+ state->have = 0;
+ state->mode = CODELENS;
+ case CODELENS:
+ while (state->have < state->nlen + state->ndist) {
+ for (;;) {
+ this = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (this.val < 16) {
+ NEEDBITS(this.bits);
+ DROPBITS(this.bits);
+ state->lens[state->have++] = this.val;
+ }
+ else {
+ if (this.val == 16) {
+ NEEDBITS(this.bits + 2);
+ DROPBITS(this.bits);
+ if (state->have == 0) {
+ strm->msg = (char *)"invalid bit length repeat";
+ state->mode = BAD;
+ break;
+ }
+ len = state->lens[state->have - 1];
+ copy = 3 + BITS(2);
+ DROPBITS(2);
+ }
+ else if (this.val == 17) {
+ NEEDBITS(this.bits + 3);
+ DROPBITS(this.bits);
+ len = 0;
+ copy = 3 + BITS(3);
+ DROPBITS(3);
+ }
+ else {
+ NEEDBITS(this.bits + 7);
+ DROPBITS(this.bits);
+ len = 0;
+ copy = 11 + BITS(7);
+ DROPBITS(7);
+ }
+ if (state->have + copy > state->nlen + state->ndist) {
+ strm->msg = (char *)"invalid bit length repeat";
+ state->mode = BAD;
+ break;
+ }
+ while (copy--)
+ state->lens[state->have++] = (unsigned short)len;
+ }
+ }
+
+ /* handle error breaks in while */
+ if (state->mode == BAD) break;
+
+ /* build code tables */
+ state->next = state->codes;
+ state->lencode = (code const *)(state->next);
+ state->lenbits = 9;
+ ret = zlib_inflate_table(LENS, state->lens, state->nlen, &(state->next),
+ &(state->lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid literal/lengths set";
+ state->mode = BAD;
+ break;
+ }
+ state->distcode = (code const *)(state->next);
+ state->distbits = 6;
+ ret = zlib_inflate_table(DISTS, state->lens + state->nlen, state->ndist,
+ &(state->next), &(state->distbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid distances set";
+ state->mode = BAD;
+ break;
+ }
+ state->mode = LEN;
+ case LEN:
+ if (have >= 6 && left >= 258) {
+ RESTORE();
+ inflate_fast(strm, out);
+ LOAD();
+ break;
+ }
+ for (;;) {
+ this = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (this.op && (this.op & 0xf0) == 0) {
+ last = this;
+ for (;;) {
+ this = state->lencode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ }
+ DROPBITS(this.bits);
+ state->length = (unsigned)this.val;
+ if ((int)(this.op) == 0) {
+ state->mode = LIT;
+ break;
+ }
+ if (this.op & 32) {
+ state->mode = TYPE;
+ break;
+ }
+ if (this.op & 64) {
+ strm->msg = (char *)"invalid literal/length code";
+ state->mode = BAD;
+ break;
+ }
+ state->extra = (unsigned)(this.op) & 15;
+ state->mode = LENEXT;
+ case LENEXT:
+ if (state->extra) {
+ NEEDBITS(state->extra);
+ state->length += BITS(state->extra);
+ DROPBITS(state->extra);
+ }
+ state->mode = DIST;
+ case DIST:
+ for (;;) {
+ this = state->distcode[BITS(state->distbits)];
+ if ((unsigned)(this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if ((this.op & 0xf0) == 0) {
+ last = this;
+ for (;;) {
+ this = state->distcode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ }
+ DROPBITS(this.bits);
+ if (this.op & 64) {
+ strm->msg = (char *)"invalid distance code";
+ state->mode = BAD;
+ break;
+ }
+ state->offset = (unsigned)this.val;
+ state->extra = (unsigned)(this.op) & 15;
+ state->mode = DISTEXT;
+ case DISTEXT:
+ if (state->extra) {
+ NEEDBITS(state->extra);
+ state->offset += BITS(state->extra);
+ DROPBITS(state->extra);
+ }
+#ifdef INFLATE_STRICT
+ if (state->offset > state->dmax) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ if (state->offset > state->whave + out - left) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+ state->mode = MATCH;
+ case MATCH:
+ if (left == 0) goto inf_leave;
+ copy = out - left;
+ if (state->offset > copy) { /* copy from window */
+ copy = state->offset - copy;
+ if (copy > state->write) {
+ copy -= state->write;
+ from = state->window + (state->wsize - copy);
+ }
+ else
+ from = state->window + (state->write - copy);
+ if (copy > state->length) copy = state->length;
+ }
+ else { /* copy from output */
+ from = put - state->offset;
+ copy = state->length;
+ }
+ if (copy > left) copy = left;
+ left -= copy;
+ state->length -= copy;
+ do {
+ *put++ = *from++;
+ } while (--copy);
+ if (state->length == 0) state->mode = LEN;
+ break;
+ case LIT:
+ if (left == 0) goto inf_leave;
+ *put++ = (unsigned char)(state->length);
+ left--;
+ state->mode = LEN;
+ break;
+ case CHECK:
+ if (state->wrap) {
+ NEEDBITS(32);
+ out -= left;
+ strm->total_out += out;
+ state->total += out;
+ if (out)
+ strm->adler = state->check =
+ UPDATE(state->check, put - out, out);
+ out = left;
+ if ((
+ REVERSE(hold)) != state->check) {
+ strm->msg = (char *)"incorrect data check";
+ state->mode = BAD;
+ break;
+ }
+ INITBITS();
+ }
+ state->mode = DONE;
+ case DONE:
+ ret = Z_STREAM_END;
+ goto inf_leave;
+ case BAD:
+ ret = Z_DATA_ERROR;
+ goto inf_leave;
+ case MEM:
+ return Z_MEM_ERROR;
+ case SYNC:
+ default:
+ return Z_STREAM_ERROR;
+ }
+
+ /*
+ Return from inflate(), updating the total counts and the check value.
+ If there was no progress during the inflate() call, return a buffer
+ error. Call zlib_updatewindow() to create and/or update the window state.
+ */
+ inf_leave:
+ RESTORE();
+ if (state->wsize || (state->mode < CHECK && out != strm->avail_out))
+ zlib_updatewindow(strm, out);
+
+ in -= strm->avail_in;
+ out -= strm->avail_out;
+ strm->total_in += in;
+ strm->total_out += out;
+ state->total += out;
+ if (state->wrap && out)
+ strm->adler = state->check =
+ UPDATE(state->check, strm->next_out - out, out);
+
+ strm->data_type = state->bits + (state->last ? 64 : 0) +
+ (state->mode == TYPE ? 128 : 0);
+
+ if (flush == Z_PACKET_FLUSH && ret == Z_OK &&
+ strm->avail_out != 0 && strm->avail_in == 0)
+ return zlib_inflateSyncPacket(strm);
+
+ if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
+ ret = Z_BUF_ERROR;
+
+ return ret;
+}
+
+int zlib_inflateEnd(z_streamp strm)
+{
+ if (strm == NULL || strm->state == NULL)
+ return Z_STREAM_ERROR;
+ return Z_OK;
+}
+
+#if 0
+int zlib_inflateSetDictionary(z_streamp strm, const Byte *dictionary,
+ uInt dictLength)
+{
+ struct inflate_state *state;
+ unsigned long id;
+
+ /* check state */
+ if (strm == NULL || strm->state == NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state *)strm->state;
+ if (state->wrap != 0 && state->mode != DICT)
+ return Z_STREAM_ERROR;
+
+ /* check for correct dictionary id */
+ if (state->mode == DICT) {
+ id = zlib_adler32(0L, NULL, 0);
+ id = zlib_adler32(id, dictionary, dictLength);
+ if (id != state->check)
+ return Z_DATA_ERROR;
+ }
+
+ /* copy dictionary to window */
+ zlib_updatewindow(strm, strm->avail_out);
+
+ if (dictLength > state->wsize) {
+ memcpy(state->window, dictionary + dictLength - state->wsize,
+ state->wsize);
+ state->whave = state->wsize;
+ }
+ else {
+ memcpy(state->window + state->wsize - dictLength, dictionary,
+ dictLength);
+ state->whave = dictLength;
+ }
+ state->havedict = 1;
+ return Z_OK;
+}
+#endif
+
+#if 0
+/*
+ Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found
+ or when out of input. When called, *have is the number of pattern bytes
+ found in order so far, in 0..3. On return *have is updated to the new
+ state. If on return *have equals four, then the pattern was found and the
+ return value is how many bytes were read including the last byte of the
+ pattern. If *have is less than four, then the pattern has not been found
+ yet and the return value is len. In the latter case, zlib_syncsearch() can be
+ called again with more data and the *have state. *have is initialized to
+ zero for the first call.
+ */
+static unsigned zlib_syncsearch(unsigned *have, unsigned char *buf,
+ unsigned len)
+{
+ unsigned got;
+ unsigned next;
+
+ got = *have;
+ next = 0;
+ while (next < len && got < 4) {
+ if ((int)(buf[next]) == (got < 2 ? 0 : 0xff))
+ got++;
+ else if (buf[next])
+ got = 0;
+ else
+ got = 4 - got;
+ next++;
+ }
+ *have = got;
+ return next;
+}
+#endif
+
+#if 0
+int zlib_inflateSync(z_streamp strm)
+{
+ unsigned len; /* number of bytes to look at or looked at */
+ unsigned long in, out; /* temporary to save total_in and total_out */
+ unsigned char buf[4]; /* to restore bit buffer to byte string */
+ struct inflate_state *state;
+
+ /* check parameters */
+ if (strm == NULL || strm->state == NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state *)strm->state;
+ if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR;
+
+ /* if first time, start search in bit buffer */
+ if (state->mode != SYNC) {
+ state->mode = SYNC;
+ state->hold <<= state->bits & 7;
+ state->bits -= state->bits & 7;
+ len = 0;
+ while (state->bits >= 8) {
+ buf[len++] = (unsigned char)(state->hold);
+ state->hold >>= 8;
+ state->bits -= 8;
+ }
+ state->have = 0;
+ zlib_syncsearch(&(state->have), buf, len);
+ }
+
+ /* search available input */
+ len = zlib_syncsearch(&(state->have), strm->next_in, strm->avail_in);
+ strm->avail_in -= len;
+ strm->next_in += len;
+ strm->total_in += len;
+
+ /* return no joy or set up to restart inflate() on a new block */
+ if (state->have != 4) return Z_DATA_ERROR;
+ in = strm->total_in; out = strm->total_out;
+ zlib_inflateReset(strm);
+ strm->total_in = in; strm->total_out = out;
+ state->mode = TYPE;
+ return Z_OK;
+}
+#endif
+
+/*
+ * This subroutine adds the data at next_in/avail_in to the output history
+ * without performing any output. The output buffer must be "caught up";
+ * i.e. no pending output but this should always be the case. The state must
+ * be waiting on the start of a block (i.e. mode == TYPE or HEAD). On exit,
+ * the output will also be caught up, and the checksum will have been updated
+ * if need be.
+ */
+int zlib_inflateIncomp(z_stream *z)
+{
+ struct inflate_state *state = (struct inflate_state *)z->state;
+ Byte *saved_no = z->next_out;
+ uInt saved_ao = z->avail_out;
+
+ if (state->mode != TYPE && state->mode != HEAD)
+ return Z_DATA_ERROR;
+
+ /* Setup some variables to allow misuse of updateWindow */
+ z->avail_out = 0;
+ z->next_out = (unsigned char*)z->next_in + z->avail_in;
+
+ zlib_updatewindow(z, z->avail_in);
+
+ /* Restore saved variables */
+ z->avail_out = saved_ao;
+ z->next_out = saved_no;
+
+ z->adler = state->check =
+ UPDATE(state->check, z->next_in, z->avail_in);
+
+ z->total_out += z->avail_in;
+ z->total_in += z->avail_in;
+ z->next_in += z->avail_in;
+ state->total += z->avail_in;
+ z->avail_in = 0;
+
+ return Z_OK;
+}
diff --git a/lib/zlib_inflate/inflate.h b/lib/zlib_inflate/inflate.h
new file mode 100644
index 0000000..3d17b3d
--- /dev/null
+++ b/lib/zlib_inflate/inflate.h
@@ -0,0 +1,111 @@
+#ifndef INFLATE_H
+#define INFLATE_H
+
+/* inflate.h -- internal inflate state definition
+ * Copyright (C) 1995-2004 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* Possible inflate modes between inflate() calls */
+typedef enum {
+ HEAD, /* i: waiting for magic header */
+ FLAGS, /* i: waiting for method and flags (gzip) */
+ TIME, /* i: waiting for modification time (gzip) */
+ OS, /* i: waiting for extra flags and operating system (gzip) */
+ EXLEN, /* i: waiting for extra length (gzip) */
+ EXTRA, /* i: waiting for extra bytes (gzip) */
+ NAME, /* i: waiting for end of file name (gzip) */
+ COMMENT, /* i: waiting for end of comment (gzip) */
+ HCRC, /* i: waiting for header crc (gzip) */
+ DICTID, /* i: waiting for dictionary check value */
+ DICT, /* waiting for inflateSetDictionary() call */
+ TYPE, /* i: waiting for type bits, including last-flag bit */
+ TYPEDO, /* i: same, but skip check to exit inflate on new block */
+ STORED, /* i: waiting for stored size (length and complement) */
+ COPY, /* i/o: waiting for input or output to copy stored block */
+ TABLE, /* i: waiting for dynamic block table lengths */
+ LENLENS, /* i: waiting for code length code lengths */
+ CODELENS, /* i: waiting for length/lit and distance code lengths */
+ LEN, /* i: waiting for length/lit code */
+ LENEXT, /* i: waiting for length extra bits */
+ DIST, /* i: waiting for distance code */
+ DISTEXT, /* i: waiting for distance extra bits */
+ MATCH, /* o: waiting for output space to copy string */
+ LIT, /* o: waiting for output space to write literal */
+ CHECK, /* i: waiting for 32-bit check value */
+ LENGTH, /* i: waiting for 32-bit length (gzip) */
+ DONE, /* finished check, done -- remain here until reset */
+ BAD, /* got a data error -- remain here until reset */
+ MEM, /* got an inflate() memory error -- remain here until reset */
+ SYNC /* looking for synchronization bytes to restart inflate() */
+} inflate_mode;
+
+/*
+ State transitions between above modes -
+
+ (most modes can go to the BAD or MEM mode -- not shown for clarity)
+
+ Process header:
+ HEAD -> (gzip) or (zlib)
+ (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME
+ NAME -> COMMENT -> HCRC -> TYPE
+ (zlib) -> DICTID or TYPE
+ DICTID -> DICT -> TYPE
+ Read deflate blocks:
+ TYPE -> STORED or TABLE or LEN or CHECK
+ STORED -> COPY -> TYPE
+ TABLE -> LENLENS -> CODELENS -> LEN
+ Read deflate codes:
+ LEN -> LENEXT or LIT or TYPE
+ LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
+ LIT -> LEN
+ Process trailer:
+ CHECK -> LENGTH -> DONE
+ */
+
+/* state maintained between inflate() calls. Approximately 7K bytes. */
+struct inflate_state {
+ inflate_mode mode; /* current inflate mode */
+ int last; /* true if processing last block */
+ int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
+ int havedict; /* true if dictionary provided */
+ int flags; /* gzip header method and flags (0 if zlib) */
+ unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */
+ unsigned long check; /* protected copy of check value */
+ unsigned long total; /* protected copy of output count */
+ /* gz_headerp head; */ /* where to save gzip header information */
+ /* sliding window */
+ unsigned wbits; /* log base 2 of requested window size */
+ unsigned wsize; /* window size or zero if not using window */
+ unsigned whave; /* valid bytes in the window */
+ unsigned write; /* window write index */
+ unsigned char *window; /* allocated sliding window, if needed */
+ /* bit accumulator */
+ unsigned long hold; /* input bit accumulator */
+ unsigned bits; /* number of bits in "in" */
+ /* for string and stored block copying */
+ unsigned length; /* literal or length of data to copy */
+ unsigned offset; /* distance back to copy string from */
+ /* for table and code decoding */
+ unsigned extra; /* extra bits needed */
+ /* fixed and dynamic code tables */
+ code const *lencode; /* starting table for length/literal codes */
+ code const *distcode; /* starting table for distance codes */
+ unsigned lenbits; /* index bits for lencode */
+ unsigned distbits; /* index bits for distcode */
+ /* dynamic table building */
+ unsigned ncode; /* number of code length code lengths */
+ unsigned nlen; /* number of length code lengths */
+ unsigned ndist; /* number of distance code lengths */
+ unsigned have; /* number of code lengths in lens[] */
+ code *next; /* next available space in codes[] */
+ unsigned short lens[320]; /* temporary storage for code lengths */
+ unsigned short work[288]; /* work area for code table building */
+ code codes[ENOUGH]; /* space for code tables */
+};
+#endif
diff --git a/lib/zlib_inflate/inftrees.c b/lib/zlib_inflate/inftrees.c
new file mode 100644
index 0000000..3fe6ce5
--- /dev/null
+++ b/lib/zlib_inflate/inftrees.c
@@ -0,0 +1,315 @@
+/* inftrees.c -- generate Huffman trees for efficient decoding
+ * Copyright (C) 1995-2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include <linux/zutil.h>
+#include "inftrees.h"
+
+#define MAXBITS 15
+
+/*
+ Build a set of tables to decode the provided canonical Huffman code.
+ The code lengths are lens[0..codes-1]. The result starts at *table,
+ whose indices are 0..2^bits-1. work is a writable array of at least
+ lens shorts, which is used as a work area. type is the type of code
+ to be generated, CODES, LENS, or DISTS. On return, zero is success,
+ -1 is an invalid code, and +1 means that ENOUGH isn't enough. table
+ on return points to the next available entry's address. bits is the
+ requested root table index bits, and on return it is the actual root
+ table index bits. It will differ if the request is greater than the
+ longest code or if it is less than the shortest code.
+ */
+int zlib_inflate_table(codetype type, unsigned short *lens, unsigned codes,
+ code **table, unsigned *bits, unsigned short *work)
+{
+ unsigned len; /* a code's length in bits */
+ unsigned sym; /* index of code symbols */
+ unsigned min, max; /* minimum and maximum code lengths */
+ unsigned root; /* number of index bits for root table */
+ unsigned curr; /* number of index bits for current table */
+ unsigned drop; /* code bits to drop for sub-table */
+ int left; /* number of prefix codes available */
+ unsigned used; /* code entries in table used */
+ unsigned huff; /* Huffman code */
+ unsigned incr; /* for incrementing code, index */
+ unsigned fill; /* index for replicating entries */
+ unsigned low; /* low bits for current root entry */
+ unsigned mask; /* mask for low root bits */
+ code this; /* table entry for duplication */
+ code *next; /* next available space in table */
+ const unsigned short *base; /* base value table to use */
+ const unsigned short *extra; /* extra bits table to use */
+ int end; /* use base and extra for symbol > end */
+ unsigned short count[MAXBITS+1]; /* number of codes of each length */
+ unsigned short offs[MAXBITS+1]; /* offsets in table for each length */
+ static const unsigned short lbase[31] = { /* Length codes 257..285 base */
+ 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+ 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
+ static const unsigned short lext[31] = { /* Length codes 257..285 extra */
+ 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
+ 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 201, 196};
+ static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
+ 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+ 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+ 8193, 12289, 16385, 24577, 0, 0};
+ static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
+ 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
+ 23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
+ 28, 28, 29, 29, 64, 64};
+
+ /*
+ Process a set of code lengths to create a canonical Huffman code. The
+ code lengths are lens[0..codes-1]. Each length corresponds to the
+ symbols 0..codes-1. The Huffman code is generated by first sorting the
+ symbols by length from short to long, and retaining the symbol order
+ for codes with equal lengths. Then the code starts with all zero bits
+ for the first code of the shortest length, and the codes are integer
+ increments for the same length, and zeros are appended as the length
+ increases. For the deflate format, these bits are stored backwards
+ from their more natural integer increment ordering, and so when the
+ decoding tables are built in the large loop below, the integer codes
+ are incremented backwards.
+
+ This routine assumes, but does not check, that all of the entries in
+ lens[] are in the range 0..MAXBITS. The caller must assure this.
+ 1..MAXBITS is interpreted as that code length. zero means that that
+ symbol does not occur in this code.
+
+ The codes are sorted by computing a count of codes for each length,
+ creating from that a table of starting indices for each length in the
+ sorted table, and then entering the symbols in order in the sorted
+ table. The sorted table is work[], with that space being provided by
+ the caller.
+
+ The length counts are used for other purposes as well, i.e. finding
+ the minimum and maximum length codes, determining if there are any
+ codes at all, checking for a valid set of lengths, and looking ahead
+ at length counts to determine sub-table sizes when building the
+ decoding tables.
+ */
+
+ /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
+ for (len = 0; len <= MAXBITS; len++)
+ count[len] = 0;
+ for (sym = 0; sym < codes; sym++)
+ count[lens[sym]]++;
+
+ /* bound code lengths, force root to be within code lengths */
+ root = *bits;
+ for (max = MAXBITS; max >= 1; max--)
+ if (count[max] != 0) break;
+ if (root > max) root = max;
+ if (max == 0) { /* no symbols to code at all */
+ this.op = (unsigned char)64; /* invalid code marker */
+ this.bits = (unsigned char)1;
+ this.val = (unsigned short)0;
+ *(*table)++ = this; /* make a table to force an error */
+ *(*table)++ = this;
+ *bits = 1;
+ return 0; /* no symbols, but wait for decoding to report error */
+ }
+ for (min = 1; min <= MAXBITS; min++)
+ if (count[min] != 0) break;
+ if (root < min) root = min;
+
+ /* check for an over-subscribed or incomplete set of lengths */
+ left = 1;
+ for (len = 1; len <= MAXBITS; len++) {
+ left <<= 1;
+ left -= count[len];
+ if (left < 0) return -1; /* over-subscribed */
+ }
+ if (left > 0 && (type == CODES || max != 1))
+ return -1; /* incomplete set */
+
+ /* generate offsets into symbol table for each length for sorting */
+ offs[1] = 0;
+ for (len = 1; len < MAXBITS; len++)
+ offs[len + 1] = offs[len] + count[len];
+
+ /* sort symbols by length, by symbol order within each length */
+ for (sym = 0; sym < codes; sym++)
+ if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
+
+ /*
+ Create and fill in decoding tables. In this loop, the table being
+ filled is at next and has curr index bits. The code being used is huff
+ with length len. That code is converted to an index by dropping drop
+ bits off of the bottom. For codes where len is less than drop + curr,
+ those top drop + curr - len bits are incremented through all values to
+ fill the table with replicated entries.
+
+ root is the number of index bits for the root table. When len exceeds
+ root, sub-tables are created pointed to by the root entry with an index
+ of the low root bits of huff. This is saved in low to check for when a
+ new sub-table should be started. drop is zero when the root table is
+ being filled, and drop is root when sub-tables are being filled.
+
+ When a new sub-table is needed, it is necessary to look ahead in the
+ code lengths to determine what size sub-table is needed. The length
+ counts are used for this, and so count[] is decremented as codes are
+ entered in the tables.
+
+ used keeps track of how many table entries have been allocated from the
+ provided *table space. It is checked when a LENS table is being made
+ against the space in *table, ENOUGH, minus the maximum space needed by
+ the worst case distance code, MAXD. This should never happen, but the
+ sufficiency of ENOUGH has not been proven exhaustively, hence the check.
+ This assumes that when type == LENS, bits == 9.
+
+ sym increments through all symbols, and the loop terminates when
+ all codes of length max, i.e. all codes, have been processed. This
+ routine permits incomplete codes, so another loop after this one fills
+ in the rest of the decoding tables with invalid code markers.
+ */
+
+ /* set up for code type */
+ switch (type) {
+ case CODES:
+ base = extra = work; /* dummy value--not used */
+ end = 19;
+ break;
+ case LENS:
+ base = lbase;
+ base -= 257;
+ extra = lext;
+ extra -= 257;
+ end = 256;
+ break;
+ default: /* DISTS */
+ base = dbase;
+ extra = dext;
+ end = -1;
+ }
+
+ /* initialize state for loop */
+ huff = 0; /* starting code */
+ sym = 0; /* starting code symbol */
+ len = min; /* starting code length */
+ next = *table; /* current table to fill in */
+ curr = root; /* current table index bits */
+ drop = 0; /* current bits to drop from code for index */
+ low = (unsigned)(-1); /* trigger new sub-table when len > root */
+ used = 1U << root; /* use root table entries */
+ mask = used - 1; /* mask for comparing low */
+
+ /* check available table space */
+ if (type == LENS && used >= ENOUGH - MAXD)
+ return 1;
+
+ /* process all codes and make table entries */
+ for (;;) {
+ /* create table entry */
+ this.bits = (unsigned char)(len - drop);
+ if ((int)(work[sym]) < end) {
+ this.op = (unsigned char)0;
+ this.val = work[sym];
+ }
+ else if ((int)(work[sym]) > end) {
+ this.op = (unsigned char)(extra[work[sym]]);
+ this.val = base[work[sym]];
+ }
+ else {
+ this.op = (unsigned char)(32 + 64); /* end of block */
+ this.val = 0;
+ }
+
+ /* replicate for those indices with low len bits equal to huff */
+ incr = 1U << (len - drop);
+ fill = 1U << curr;
+ min = fill; /* save offset to next table */
+ do {
+ fill -= incr;
+ next[(huff >> drop) + fill] = this;
+ } while (fill != 0);
+
+ /* backwards increment the len-bit code huff */
+ incr = 1U << (len - 1);
+ while (huff & incr)
+ incr >>= 1;
+ if (incr != 0) {
+ huff &= incr - 1;
+ huff += incr;
+ }
+ else
+ huff = 0;
+
+ /* go to next symbol, update count, len */
+ sym++;
+ if (--(count[len]) == 0) {
+ if (len == max) break;
+ len = lens[work[sym]];
+ }
+
+ /* create new sub-table if needed */
+ if (len > root && (huff & mask) != low) {
+ /* if first time, transition to sub-tables */
+ if (drop == 0)
+ drop = root;
+
+ /* increment past last table */
+ next += min; /* here min is 1 << curr */
+
+ /* determine length of next table */
+ curr = len - drop;
+ left = (int)(1 << curr);
+ while (curr + drop < max) {
+ left -= count[curr + drop];
+ if (left <= 0) break;
+ curr++;
+ left <<= 1;
+ }
+
+ /* check for enough space */
+ used += 1U << curr;
+ if (type == LENS && used >= ENOUGH - MAXD)
+ return 1;
+
+ /* point entry in root table to sub-table */
+ low = huff & mask;
+ (*table)[low].op = (unsigned char)curr;
+ (*table)[low].bits = (unsigned char)root;
+ (*table)[low].val = (unsigned short)(next - *table);
+ }
+ }
+
+ /*
+ Fill in rest of table for incomplete codes. This loop is similar to the
+ loop above in incrementing huff for table indices. It is assumed that
+ len is equal to curr + drop, so there is no loop needed to increment
+ through high index bits. When the current sub-table is filled, the loop
+ drops back to the root table to fill in any remaining entries there.
+ */
+ this.op = (unsigned char)64; /* invalid code marker */
+ this.bits = (unsigned char)(len - drop);
+ this.val = (unsigned short)0;
+ while (huff != 0) {
+ /* when done with sub-table, drop back to root table */
+ if (drop != 0 && (huff & mask) != low) {
+ drop = 0;
+ len = root;
+ next = *table;
+ this.bits = (unsigned char)len;
+ }
+
+ /* put invalid code marker in table */
+ next[huff >> drop] = this;
+
+ /* backwards increment the len-bit code huff */
+ incr = 1U << (len - 1);
+ while (huff & incr)
+ incr >>= 1;
+ if (incr != 0) {
+ huff &= incr - 1;
+ huff += incr;
+ }
+ else
+ huff = 0;
+ }
+
+ /* set return parameters */
+ *table += used;
+ *bits = root;
+ return 0;
+}
diff --git a/lib/zlib_inflate/inftrees.h b/lib/zlib_inflate/inftrees.h
new file mode 100644
index 0000000..b70b473
--- /dev/null
+++ b/lib/zlib_inflate/inftrees.h
@@ -0,0 +1,59 @@
+#ifndef INFTREES_H
+#define INFTREES_H
+
+/* inftrees.h -- header to use inftrees.c
+ * Copyright (C) 1995-2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* Structure for decoding tables. Each entry provides either the
+ information needed to do the operation requested by the code that
+ indexed that table entry, or it provides a pointer to another
+ table that indexes more bits of the code. op indicates whether
+ the entry is a pointer to another table, a literal, a length or
+ distance, an end-of-block, or an invalid code. For a table
+ pointer, the low four bits of op is the number of index bits of
+ that table. For a length or distance, the low four bits of op
+ is the number of extra bits to get after the code. bits is
+ the number of bits in this code or part of the code to drop off
+ of the bit buffer. val is the actual byte to output in the case
+ of a literal, the base length or distance, or the offset from
+ the current table to the next table. Each entry is four bytes. */
+typedef struct {
+ unsigned char op; /* operation, extra bits, table bits */
+ unsigned char bits; /* bits in this part of the code */
+ unsigned short val; /* offset in table or code value */
+} code;
+
+/* op values as set by inflate_table():
+ 00000000 - literal
+ 0000tttt - table link, tttt != 0 is the number of table index bits
+ 0001eeee - length or distance, eeee is the number of extra bits
+ 01100000 - end of block
+ 01000000 - invalid code
+ */
+
+/* Maximum size of dynamic tree. The maximum found in a long but non-
+ exhaustive search was 1444 code structures (852 for length/literals
+ and 592 for distances, the latter actually the result of an
+ exhaustive search). The true maximum is not known, but the value
+ below is more than safe. */
+#define ENOUGH 2048
+#define MAXD 592
+
+/* Type of code to build for inftable() */
+typedef enum {
+ CODES,
+ LENS,
+ DISTS
+} codetype;
+
+extern int zlib_inflate_table (codetype type, unsigned short *lens,
+ unsigned codes, code **table,
+ unsigned *bits, unsigned short *work);
+#endif
diff --git a/lib/zlib_inflate/infutil.c b/lib/zlib_inflate/infutil.c
new file mode 100644
index 0000000..f452ba6
--- /dev/null
+++ b/lib/zlib_inflate/infutil.c
@@ -0,0 +1,47 @@
+#include <linux/zutil.h>
+#include <errno.h>
+
+/* Utility function: initialize zlib, unpack binary blob, clean up zlib,
+ * return len or negative error code.
+ */
+int zlib_inflate_blob(void *gunzip_buf, unsigned int sz,
+ const void *buf, unsigned int len)
+{
+ const u8 *zbuf = buf;
+ struct z_stream_s *strm;
+ int rc;
+
+ rc = -ENOMEM;
+ strm = kmalloc(sizeof(*strm), GFP_KERNEL);
+ if (strm == NULL)
+ goto gunzip_nomem1;
+ strm->workspace = kmalloc(zlib_inflate_workspacesize(), GFP_KERNEL);
+ if (strm->workspace == NULL)
+ goto gunzip_nomem2;
+
+ /* gzip header (1f,8b,08... 10 bytes total + possible asciz filename)
+ * expected to be stripped from input
+ */
+ strm->next_in = zbuf;
+ strm->avail_in = len;
+ strm->next_out = gunzip_buf;
+ strm->avail_out = sz;
+
+ rc = zlib_inflateInit2(strm, -MAX_WBITS);
+ if (rc == Z_OK) {
+ rc = zlib_inflate(strm, Z_FINISH);
+ /* after Z_FINISH, only Z_STREAM_END is "we unpacked it all" */
+ if (rc == Z_STREAM_END)
+ rc = sz - strm->avail_out;
+ else
+ rc = -EINVAL;
+ zlib_inflateEnd(strm);
+ } else
+ rc = -EINVAL;
+
+ kfree(strm->workspace);
+gunzip_nomem2:
+ kfree(strm);
+gunzip_nomem1:
+ return rc; /* returns Z_OK (0) if successful */
+}
diff --git a/lib/zlib_inflate/infutil.h b/lib/zlib_inflate/infutil.h
new file mode 100644
index 0000000..e7dea7a
--- /dev/null
+++ b/lib/zlib_inflate/infutil.h
@@ -0,0 +1,25 @@
+/* infutil.h -- types and macros common to blocks and codes
+ * Copyright (C) 1995-1998 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+#ifndef _INFUTIL_H
+#define _INFUTIL_H
+
+#include <linux/zlib.h>
+
+/* memory allocation for inflation */
+
+struct inflate_workspace {
+ struct inflate_state inflate_state;
+ unsigned char working_window[1 << MAX_WBITS];
+};
+
+#define WS(z) ((struct inflate_workspace *)(z->workspace))
+
+#endif
diff --git a/lib/zlib_inflate/modules.builtin b/lib/zlib_inflate/modules.builtin
new file mode 100644
index 0000000..7206225
--- /dev/null
+++ b/lib/zlib_inflate/modules.builtin
@@ -0,0 +1 @@
+kernel/lib/zlib_inflate/zlib_inflate.ko
--
1.7.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH 07/16] remove old zlib
2011-11-28 22:09 uncompress work Sascha Hauer
` (5 preceding siblings ...)
2011-11-28 22:09 ` [PATCH 06/16] add kernel gunzip implementation Sascha Hauer
@ 2011-11-28 22:10 ` Sascha Hauer
2011-12-03 18:47 ` Jean-Christophe PLAGNIOL-VILLARD
2011-11-28 22:10 ` [PATCH 08/16] lib: prompt for uncompression functions Sascha Hauer
` (8 subsequent siblings)
15 siblings, 1 reply; 21+ messages in thread
From: Sascha Hauer @ 2011-11-28 22:10 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
include/zlib.h | 434 ------------
lib/gunzip.c | 85 ---
lib/zlib.c | 2158 --------------------------------------------------------
3 files changed, 0 insertions(+), 2677 deletions(-)
delete mode 100644 include/zlib.h
delete mode 100644 lib/gunzip.c
delete mode 100644 lib/zlib.c
diff --git a/include/zlib.h b/include/zlib.h
deleted file mode 100644
index e441494..0000000
--- a/include/zlib.h
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- * This file is derived from zlib.h and zconf.h from the zlib-0.95
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.
- */
-
-/*
- * ==FILEVERSION 960122==
- *
- * This marker is used by the Linux installation script to determine
- * whether an up-to-date version of this file is already installed.
- */
-
-/* zlib.h -- interface of the 'zlib' general purpose compression library
- version 0.95, Aug 16th, 1995.
-
- Copyright (C) 1995 Jean-loup Gailly and Mark Adler
-
- This software is provided 'as-is', without any express or implied
- warranty. In no event will the authors be held liable for any damages
- arising from the use of this software.
-
- Permission is granted to anyone to use this software for any purpose,
- including commercial applications, and to alter it and redistribute it
- freely, subject to the following restrictions:
-
- 1. The origin of this software must not be misrepresented; you must not
- claim that you wrote the original software. If you use this software
- in a product, an acknowledgment in the product documentation would be
- appreciated but is not required.
- 2. Altered source versions must be plainly marked as such, and must not be
- misrepresented as being the original software.
- 3. This notice may not be removed or altered from any source distribution.
-
- Jean-loup Gailly Mark Adler
- gzip@prep.ai.mit.edu madler@alumni.caltech.edu
- */
-
-#ifndef _ZLIB_H
-#define _ZLIB_H
-
-/* #include "zconf.h" */ /* included directly here */
-
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */
-
-/*
- The library does not install any signal handler. It is recommended to
- add at least a handler for SIGSEGV when decompressing; the library checks
- the consistency of the input data whenever possible but may go nuts
- for some forms of corrupted input.
- */
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints
- * at addresses which are not a multiple of their size.
- * Under DOS, -DFAR=far or -DFAR=__far may be needed.
- */
-
-#ifndef STDC
-# if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus)
-# define STDC
-# endif
-#endif
-
-#ifdef __MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */
-# include <unix.h>
-#endif
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-# ifdef MAXSEG_64K
-# define MAX_MEM_LEVEL 8
-# else
-# define MAX_MEM_LEVEL 9
-# endif
-#endif
-
-#ifndef FAR
-# define FAR
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
-#ifndef MAX_WBITS
-# define MAX_WBITS 15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
- 1 << (windowBits+2) + 1 << (memLevel+9)
- that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
- make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
- The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
- for small objects.
-*/
-
- /* Type declarations */
-
-#ifndef OF /* function prototypes */
-# ifdef STDC
-# define OF(args) args
-# else
-# define OF(args) ()
-# endif
-#endif
-
-typedef unsigned char Byte; /* 8 bits */
-typedef unsigned int uInt; /* 16 bits or more */
-typedef unsigned long uLong; /* 32 bits or more */
-
-typedef Byte FAR Bytef;
-typedef char FAR charf;
-typedef int FAR intf;
-typedef uInt FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
- typedef void FAR *voidpf;
- typedef void *voidp;
-#else
- typedef Byte FAR *voidpf;
- typedef Byte *voidp;
-#endif
-
-/* end of original zconf.h */
-
-#define ZLIB_VERSION "0.95P"
-
-/*
- The 'zlib' compression library provides in-memory compression and
- decompression functions, including integrity checks of the uncompressed
- data. This version of the library supports only one compression method
- (deflation) but other algorithms may be added later and will have the same
- stream interface.
-
- For compression the application must provide the output buffer and
- may optionally provide the input buffer for optimization. For decompression,
- the application must provide the input buffer and may optionally provide
- the output buffer for optimization.
-
- Compression can be done in a single step if the buffers are large
- enough (for example if an input file is mmap'ed), or can be done by
- repeated calls of the compression function. In the latter case, the
- application must provide more input and/or consume the output
- (providing more output space) before each call.
-*/
-
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void (*free_func) OF((voidpf opaque, voidpf address, uInt nbytes));
-
-typedef void (*cb_func) OF((Bytef *buf, uInt len));
-
-struct internal_state;
-
-typedef struct z_stream_s {
- Bytef *next_in; /* next input byte */
- uInt avail_in; /* number of bytes available at next_in */
- uLong total_in; /* total nb of input bytes read so far */
-
- Bytef *next_out; /* next output byte should be put there */
- uInt avail_out; /* remaining free space at next_out */
- uLong total_out; /* total nb of bytes output so far */
-
- char *msg; /* last error message, NULL if no error */
- struct internal_state FAR *state; /* not visible by applications */
-
- alloc_func zalloc; /* used to allocate the internal state */
- free_func zfree; /* used to free the internal state */
- voidp opaque; /* private data object passed to zalloc and zfree */
-
- Byte data_type; /* best guess about the data type: ascii or binary */
-
- cb_func outcb; /* called regularly just before blocks of output */
-
-} z_stream;
-
-/*
- The application must update next_in and avail_in when avail_in has
- dropped to zero. It must update next_out and avail_out when avail_out
- has dropped to zero. The application must initialize zalloc, zfree and
- opaque before calling the init function. All other fields are set by the
- compression library and must not be updated by the application.
-
- The opaque value provided by the application will be passed as the first
- parameter for calls of zalloc and zfree. This can be useful for custom
- memory management. The compression library attaches no meaning to the
- opaque value.
-
- zalloc must return Z_NULL if there is not enough memory for the object.
- On 16-bit systems, the functions zalloc and zfree must be able to allocate
- exactly 65536 bytes, but will not be required to allocate more than this
- if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
- pointers returned by zalloc for objects of exactly 65536 bytes *must*
- have their offset normalized to zero. The default allocation function
- provided by this library ensures this (see zutil.c). To reduce memory
- requirements and avoid any allocation of 64K objects, at the expense of
- compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
- The fields total_in and total_out can be used for statistics or
- progress reports. After compression, total_in holds the total size of
- the uncompressed data and may be saved for use in the decompressor
- (particularly if the decompressor wants to decompress everything in
- a single step).
-*/
-
- /* constants */
-
-#define Z_NO_FLUSH 0
-#define Z_PARTIAL_FLUSH 1
-#define Z_FULL_FLUSH 2
-#define Z_SYNC_FLUSH 3 /* experimental: partial_flush + byte align */
-#define Z_FINISH 4
-#define Z_PACKET_FLUSH 5
-/* See deflate() below for the usage of these constants */
-
-#define Z_OK 0
-#define Z_STREAM_END 1
-#define Z_ERRNO (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR (-3)
-#define Z_MEM_ERROR (-4)
-#define Z_BUF_ERROR (-5)
-/* error codes for the compression/decompression functions */
-
-#define Z_BEST_SPEED 1
-#define Z_BEST_COMPRESSION 9
-#define Z_DEFAULT_COMPRESSION (-1)
-/* compression levels */
-
-#define Z_FILTERED 1
-#define Z_HUFFMAN_ONLY 2
-#define Z_DEFAULT_STRATEGY 0
-
-#define Z_BINARY 0
-#define Z_ASCII 1
-#define Z_UNKNOWN 2
-/* Used to set the data_type field */
-
-#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
-
-extern char *zlib_version;
-/* The application can compare zlib_version and ZLIB_VERSION for consistency.
- If the first character differs, the library code actually used is
- not compatible with the zlib.h header file used by the application.
- */
-
- /* basic functions */
-
-extern int inflateInit OF((z_stream *strm));
-/*
- Initializes the internal stream state for decompression. The fields
- zalloc and zfree must be initialized before by the caller. If zalloc and
- zfree are set to Z_NULL, inflateInit updates them to use default allocation
- functions.
-
- inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory. msg is set to null if there is no error message.
- inflateInit does not perform any decompression: this will be done by
- inflate().
-*/
-
-
-extern int inflate OF((z_stream *strm, int flush));
-/*
- Performs one or both of the following actions:
-
- - Decompress more input starting at next_in and update next_in and avail_in
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), next_in is updated and processing
- will resume at this point for the next call of inflate().
-
- - Provide more output starting at next_out and update next_out and avail_out
- accordingly. inflate() always provides as much output as possible
- (until there is no more input data or no more space in the output buffer).
-
- Before the call of inflate(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating the next_* and avail_* values accordingly.
- The application can consume the uncompressed output when it wants, for
- example when the output buffer is full (avail_out == 0), or after each
- call of inflate().
-
- If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH,
- inflate flushes as much output as possible to the output buffer. The
- flushing behavior of inflate is not specified for values of the flush
- parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the
- current implementation actually flushes as much output as possible
- anyway. For Z_PACKET_FLUSH, inflate checks that once all the input data
- has been consumed, it is expecting to see the length field of a stored
- block; if not, it returns Z_DATA_ERROR.
-
- inflate() should normally be called until it returns Z_STREAM_END or an
- error. However if all decompression is to be performed in a single step
- (a single call of inflate), the parameter flush should be set to
- Z_FINISH. In this case all pending input is processed and all pending
- output is flushed; avail_out must be large enough to hold all the
- uncompressed data. (The size of the uncompressed data may have been saved
- by the compressor for this purpose.) The next operation on this stream must
- be inflateEnd to deallocate the decompression state. The use of Z_FINISH
- is never required, but can be used to inform inflate that a faster routine
- may be used for the single inflate() call.
-
- inflate() returns Z_OK if some progress has been made (more input
- processed or more output produced), Z_STREAM_END if the end of the
- compressed data has been reached and all uncompressed output has been
- produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if
- the stream structure was inconsistent (for example if next_in or next_out
- was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no
- progress is possible or if there was not enough room in the output buffer
- when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then
- call inflateSync to look for a good compression block. */
-
-
-extern int inflateEnd OF((z_stream *strm));
-/*
- All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
-
- inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
- was inconsistent. In the error case, msg may be set but then points to a
- static string (which must not be deallocated).
-*/
-
- /* advanced functions */
-
-extern int inflateInit2 OF((z_stream *strm,
- int windowBits));
-/*
- This is another version of inflateInit with more compression options. The
- fields next_out, zalloc and zfree must be initialized before by the caller.
-
- The windowBits parameter is the base two logarithm of the maximum window
- size (the size of the history buffer). It should be in the range 8..15 for
- this version of the library (the value 16 will be allowed soon). The
- default value is 15 if inflateInit is used instead. If a compressed stream
- with a larger window size is given as input, inflate() will return with
- the error code Z_DATA_ERROR instead of trying to allocate a larger window.
-
- If next_out is not null, the library will use this buffer for the history
- buffer; the buffer must either be large enough to hold the entire output
- data, or have at least 1<<windowBits bytes. If next_out is null, the
- library will allocate its own buffer (and leave next_out null). next_in
- need not be provided here but must be provided by the application for the
- next call of inflate().
-
- If the history buffer is provided by the application, next_out must
- never be changed by the application since the decompressor maintains
- history information inside this buffer from call to call; the application
- can only reset next_out to the beginning of the history buffer when
- avail_out is zero and all output has been consumed.
-
- inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
- not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
- windowBits < 8). msg is set to null if there is no error message.
- inflateInit2 does not perform any decompression: this will be done by
- inflate().
-*/
-
-extern int inflateSync OF((z_stream *strm));
-/*
- Skips invalid compressed data until the special marker (see deflate()
- above) can be found, or until all available input is skipped. No output
- is provided.
-
- inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
- if no more input was provided, Z_DATA_ERROR if no marker has been found,
- or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
- case, the application may save the current current value of total_in which
- indicates where valid compressed data was found. In the error case, the
- application may repeatedly call inflateSync, providing more input each time,
- until success or end of the input data.
-*/
-
-extern int inflateReset OF((z_stream *strm));
-/*
- This function is equivalent to inflateEnd followed by inflateInit,
- but does not free and reallocate all the internal decompression state.
- The stream will keep attributes that may have been set by inflateInit2.
-
- inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int inflateIncomp OF((z_stream *strm));
-/*
- This function adds the data at next_in (avail_in bytes) to the output
- history without performing any output. There must be no pending output,
- and the decompressor must be expecting to see the start of a block.
- Calling this function is equivalent to decompressing a stored block
- containing the data at next_in (except that the data is not output).
-*/
-
- /* checksum functions */
-
-/*
- This function is not related to compression but is exported
- anyway because it might be useful in applications using the
- compression library.
-*/
-
-extern uLong adler32 OF((uLong adler, Bytef *buf, uInt len));
-
-/*
- Update a running Adler-32 checksum with the bytes buf[0..len-1] and
- return the updated checksum. If buf is NULL, this function returns
- the required initial value for the checksum.
- An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
- much faster. Usage example:
-
- uLong adler = adler32(0L, Z_NULL, 0);
-
- while (read_buffer(buffer, length) != EOF) {
- adler = adler32(adler, buffer, length);
- }
- if (adler != original_adler) error();
-*/
-
-#ifndef _Z_UTIL_H
- struct internal_state {int dummy;}; /* hack for buggy compilers */
-#endif
-
-#endif /* _ZLIB_H */
diff --git a/lib/gunzip.c b/lib/gunzip.c
deleted file mode 100644
index c41568a..0000000
--- a/lib/gunzip.c
+++ /dev/null
@@ -1,85 +0,0 @@
-#include <common.h>
-#include <zlib.h>
-#include <malloc.h>
-
-#define ZALLOC_ALIGNMENT 16
-
-static void *zalloc(void *x, unsigned items, unsigned size)
-{
- void *p;
-
- size *= items;
- size = (size + ZALLOC_ALIGNMENT - 1) & ~(ZALLOC_ALIGNMENT - 1);
-
- p = malloc (size);
-
- return (p);
-}
-
-static void zfree(void *x, void *addr, unsigned nb)
-{
- free (addr);
-}
-
-#define HEAD_CRC 2
-#define EXTRA_FIELD 4
-#define ORIG_NAME 8
-#define COMMENT 0x10
-#define RESERVED 0xe0
-
-#define DEFLATED 8
-
-int gunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp)
-{
- z_stream s;
- int r, i, flags;
-
- /* skip header */
- i = 10;
- flags = src[3];
- if (src[2] != DEFLATED || (flags & RESERVED) != 0) {
- puts ("Error: Bad gzipped data\n");
- return (-1);
- }
- if ((flags & EXTRA_FIELD) != 0)
- i = 12 + src[10] + (src[11] << 8);
- if ((flags & ORIG_NAME) != 0)
- while (src[i++] != 0)
- ;
- if ((flags & COMMENT) != 0)
- while (src[i++] != 0)
- ;
- if ((flags & HEAD_CRC) != 0)
- i += 2;
- if (i >= *lenp) {
- puts ("Error: gunzip out of data in header\n");
- return (-1);
- }
-
- s.zalloc = zalloc;
- s.zfree = zfree;
-#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
- s.outcb = (cb_func)WATCHDOG_RESET;
-#else
- s.outcb = Z_NULL;
-#endif /* CONFIG_HW_WATCHDOG */
-
- r = inflateInit2(&s, -MAX_WBITS);
- if (r != Z_OK) {
- printf ("Error: inflateInit2() returned %d\n", r);
- return (-1);
- }
- s.next_in = src + i;
- s.avail_in = *lenp - i;
- s.next_out = dst;
- s.avail_out = dstlen;
- r = inflate(&s, Z_FINISH);
- if (r != Z_OK && r != Z_STREAM_END) {
- printf ("Error: inflate() returned %d\n", r);
- return (-1);
- }
- *lenp = s.next_out - (unsigned char *) dst;
- inflateEnd(&s);
-
- return (0);
-}
diff --git a/lib/zlib.c b/lib/zlib.c
deleted file mode 100644
index 699a6f2..0000000
--- a/lib/zlib.c
+++ /dev/null
@@ -1,2158 +0,0 @@
-/*
- * This file is derived from various .h and .c files from the zlib-0.95
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets. See zlib.h for conditions of
- * distribution and use.
- *
- * Changes that have been made include:
- * - changed functions not used outside this file to "local"
- * - added minCompression parameter to deflateInit2
- * - added Z_PACKET_FLUSH (see zlib.h for details)
- * - added inflateIncomp
- */
-
-/*+++++*/
-/* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/* From: zutil.h,v 1.9 1995/05/03 17:27:12 jloup Exp */
-
-#define _Z_UTIL_H
-
-#include "zlib.h"
-
-#ifndef local
-# define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-#define FAR
-
-typedef unsigned char uch;
-typedef uch FAR uchf;
-typedef unsigned short ush;
-typedef ush FAR ushf;
-typedef unsigned long ulg;
-
-extern char *z_errmsg[]; /* indexed by 1-zlib_error */
-
-#define ERR_RETURN(strm,err) return (strm->msg=z_errmsg[1-err], err)
-/* To be used only when the state is known to be valid */
-
-#ifndef NULL
-#define NULL ((void *) 0)
-#endif
-
- /* common constants */
-
-#define DEFLATED 8
-
-#ifndef DEF_WBITS
-# define DEF_WBITS MAX_WBITS
-#endif
-/* default windowBits for decompression. MAX_WBITS is for compression only */
-
-#if MAX_MEM_LEVEL >= 8
-# define DEF_MEM_LEVEL 8
-#else
-# define DEF_MEM_LEVEL MAX_MEM_LEVEL
-#endif
-/* default memLevel */
-
-#define STORED_BLOCK 0
-#define STATIC_TREES 1
-#define DYN_TREES 2
-/* The three kinds of block type */
-
-#define MIN_MATCH 3
-#define MAX_MATCH 258
-/* The minimum and maximum match lengths */
-
- /* functions */
-
-#include <linux/string.h>
-#define zmemcpy memcpy
-#define zmemzero(dest, len) memset(dest, 0, len)
-
-/* Diagnostic functions */
-#ifdef DEBUG_ZLIB
-# include <stdio.h>
-# ifndef verbose
-# define verbose 0
-# endif
-# define Assert(cond,msg) {if(!(cond)) z_error(msg);}
-# define Trace(x) fprintf x
-# define Tracev(x) {if (verbose) fprintf x ;}
-# define Tracevv(x) {if (verbose>1) fprintf x ;}
-# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-# define Assert(cond,msg)
-# define Trace(x)
-# define Tracev(x)
-# define Tracevv(x)
-# define Tracec(c,x)
-# define Tracecv(c,x)
-#endif
-
-
-typedef uLong (*check_func) OF((uLong check, Bytef *buf, uInt len));
-
-/* voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); */
-/* void zcfree OF((voidpf opaque, voidpf ptr)); */
-
-#define ZALLOC(strm, items, size) \
- (*((strm)->zalloc))((strm)->opaque, (items), (size))
-#define ZFREE(strm, addr, size) \
- (*((strm)->zfree))((strm)->opaque, (voidpf)(addr), (size))
-#define TRY_FREE(s, p, n) {if (p) ZFREE(s, p, n);}
-
-/* deflate.h -- internal compression state
- * Copyright (C) 1995 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/*+++++*/
-/* infblock.h -- header to use infblock.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_blocks_state;
-typedef struct inflate_blocks_state FAR inflate_blocks_statef;
-
-local inflate_blocks_statef * inflate_blocks_new OF((
- z_stream *z,
- check_func c, /* check function */
- uInt w)); /* window size */
-
-local int inflate_blocks OF((
- inflate_blocks_statef *,
- z_stream *,
- int)); /* initial return code */
-
-local void inflate_blocks_reset OF((
- inflate_blocks_statef *,
- z_stream *,
- uLongf *)); /* check value on output */
-
-local int inflate_blocks_free OF((
- inflate_blocks_statef *,
- z_stream *,
- uLongf *)); /* check value on output */
-
-local int inflate_addhistory OF((
- inflate_blocks_statef *,
- z_stream *));
-
-local int inflate_packet_flush OF((
- inflate_blocks_statef *));
-
-/*+++++*/
-/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/* Huffman code lookup table entry--this entry is four bytes for machines
- that have 16-bit pointers (e.g. PC's in the small or medium model). */
-
-typedef struct inflate_huft_s FAR inflate_huft;
-
-struct inflate_huft_s {
- union {
- struct {
- Byte Exop; /* number of extra bits or operation */
- Byte Bits; /* number of bits in this code or subcode */
- } what;
- uInt Nalloc; /* number of these allocated here */
- Bytef *pad; /* pad structure to a power of 2 (4 bytes for */
- } word; /* 16-bit, 8 bytes for 32-bit machines) */
- union {
- uInt Base; /* literal, length base, or distance base */
- inflate_huft *Next; /* pointer to next level of table */
- } more;
-};
-
-#ifdef DEBUG_ZLIB
- local uInt inflate_hufts;
-#endif
-
-local int inflate_trees_bits OF((
- uIntf *, /* 19 code lengths */
- uIntf *, /* bits tree desired/actual depth */
- inflate_huft * FAR *, /* bits tree result */
- z_stream *)); /* for zalloc, zfree functions */
-
-local int inflate_trees_dynamic OF((
- uInt, /* number of literal/length codes */
- uInt, /* number of distance codes */
- uIntf *, /* that many (total) code lengths */
- uIntf *, /* literal desired/actual bit depth */
- uIntf *, /* distance desired/actual bit depth */
- inflate_huft * FAR *, /* literal/length tree result */
- inflate_huft * FAR *, /* distance tree result */
- z_stream *)); /* for zalloc, zfree functions */
-
-local int inflate_trees_fixed OF((
- uIntf *, /* literal desired/actual bit depth */
- uIntf *, /* distance desired/actual bit depth */
- inflate_huft * FAR *, /* literal/length tree result */
- inflate_huft * FAR *)); /* distance tree result */
-
-local int inflate_trees_free OF((
- inflate_huft *, /* tables to free */
- z_stream *)); /* for zfree function */
-
-
-/*+++++*/
-/* infcodes.h -- header to use infcodes.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_codes_state;
-typedef struct inflate_codes_state FAR inflate_codes_statef;
-
-local inflate_codes_statef *inflate_codes_new OF((
- uInt, uInt,
- inflate_huft *, inflate_huft *,
- z_stream *));
-
-local int inflate_codes OF((
- inflate_blocks_statef *,
- z_stream *,
- int));
-
-local void inflate_codes_free OF((
- inflate_codes_statef *,
- z_stream *));
-
-
-/*+++++*/
-/* inflate.c -- zlib interface to inflate modules
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* inflate private state */
-struct internal_state {
-
- /* mode */
- enum {
- METHOD, /* waiting for method byte */
- FLAG, /* waiting for flag byte */
- BLOCKS, /* decompressing blocks */
- CHECK4, /* four check bytes to go */
- CHECK3, /* three check bytes to go */
- CHECK2, /* two check bytes to go */
- CHECK1, /* one check byte to go */
- DONE, /* finished check, done */
- BAD} /* got an error--stay here */
- mode; /* current inflate mode */
-
- /* mode dependent information */
- union {
- uInt method; /* if FLAGS, method byte */
- struct {
- uLong was; /* computed check value */
- uLong need; /* stream check value */
- } check; /* if CHECK, check values to compare */
- uInt marker; /* if BAD, inflateSync's marker bytes count */
- } sub; /* submode */
-
- /* mode independent information */
- int nowrap; /* flag for no wrapper */
- uInt wbits; /* log2(window size) (8..15, defaults to 15) */
- inflate_blocks_statef
- *blocks; /* current inflate_blocks state */
-
-};
-
-
-int inflateReset(z)
-z_stream *z;
-{
- uLong c;
-
- if (z == Z_NULL || z->state == Z_NULL)
- return Z_STREAM_ERROR;
- z->total_in = z->total_out = 0;
- z->msg = Z_NULL;
- z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
- inflate_blocks_reset(z->state->blocks, z, &c);
- Trace((stderr, "inflate: reset\n"));
- return Z_OK;
-}
-
-
-int inflateEnd(z)
-z_stream *z;
-{
- uLong c;
-
- if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
- return Z_STREAM_ERROR;
- if (z->state->blocks != Z_NULL)
- inflate_blocks_free(z->state->blocks, z, &c);
- ZFREE(z, z->state, sizeof(struct internal_state));
- z->state = Z_NULL;
- Trace((stderr, "inflate: end\n"));
- return Z_OK;
-}
-
-
-int inflateInit2(z, w)
-z_stream *z;
-int w;
-{
- /* initialize state */
- if (z == Z_NULL)
- return Z_STREAM_ERROR;
-/* if (z->zalloc == Z_NULL) z->zalloc = zcalloc; */
-/* if (z->zfree == Z_NULL) z->zfree = zcfree; */
- if ((z->state = (struct internal_state FAR *)
- ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
- return Z_MEM_ERROR;
- z->state->blocks = Z_NULL;
-
- /* handle undocumented nowrap option (no zlib header or check) */
- z->state->nowrap = 0;
- if (w < 0)
- {
- w = - w;
- z->state->nowrap = 1;
- }
-
- /* set window size */
- if (w < 8 || w > 15)
- {
- inflateEnd(z);
- return Z_STREAM_ERROR;
- }
- z->state->wbits = (uInt)w;
-
- /* create inflate_blocks state */
- if ((z->state->blocks =
- inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, 1 << w))
- == Z_NULL)
- {
- inflateEnd(z);
- return Z_MEM_ERROR;
- }
- Trace((stderr, "inflate: allocated\n"));
-
- /* reset state */
- inflateReset(z);
- return Z_OK;
-}
-
-
-int inflateInit(z)
-z_stream *z;
-{
- return inflateInit2(z, DEF_WBITS);
-}
-
-
-#define NEEDBYTE {if(z->avail_in==0)goto empty;r=Z_OK;}
-#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
-
-int inflate(z, f)
-z_stream *z;
-int f;
-{
- int r;
- uInt b;
-
- if (z == Z_NULL || z->next_in == Z_NULL)
- return Z_STREAM_ERROR;
- r = Z_BUF_ERROR;
- while (1) switch (z->state->mode)
- {
- case METHOD:
- NEEDBYTE
- if (((z->state->sub.method = NEXTBYTE) & 0xf) != DEFLATED)
- {
- z->state->mode = BAD;
- z->msg = "unknown compression method";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
- {
- z->state->mode = BAD;
- z->msg = "invalid window size";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- z->state->mode = FLAG;
- case FLAG:
- NEEDBYTE
- if ((b = NEXTBYTE) & 0x20)
- {
- z->state->mode = BAD;
- z->msg = "invalid reserved bit";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- if (((z->state->sub.method << 8) + b) % 31)
- {
- z->state->mode = BAD;
- z->msg = "incorrect header check";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- Trace((stderr, "inflate: zlib header ok\n"));
- z->state->mode = BLOCKS;
- case BLOCKS:
- r = inflate_blocks(z->state->blocks, z, r);
- if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0)
- r = inflate_packet_flush(z->state->blocks);
- if (r == Z_DATA_ERROR)
- {
- z->state->mode = BAD;
- z->state->sub.marker = 0; /* can try inflateSync */
- break;
- }
- if (r != Z_STREAM_END)
- return r;
- r = Z_OK;
- inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
- if (z->state->nowrap)
- {
- z->state->mode = DONE;
- break;
- }
- z->state->mode = CHECK4;
- case CHECK4:
- NEEDBYTE
- z->state->sub.check.need = (uLong)NEXTBYTE << 24;
- z->state->mode = CHECK3;
- case CHECK3:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 16;
- z->state->mode = CHECK2;
- case CHECK2:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 8;
- z->state->mode = CHECK1;
- case CHECK1:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE;
-
- if (z->state->sub.check.was != z->state->sub.check.need)
- {
- z->state->mode = BAD;
- z->msg = "incorrect data check";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- Trace((stderr, "inflate: zlib check ok\n"));
- z->state->mode = DONE;
- case DONE:
- return Z_STREAM_END;
- case BAD:
- return Z_DATA_ERROR;
- default:
- return Z_STREAM_ERROR;
- }
-
- empty:
- if (f != Z_PACKET_FLUSH)
- return r;
- z->state->mode = BAD;
- z->state->sub.marker = 0; /* can try inflateSync */
- return Z_DATA_ERROR;
-}
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output. The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS). On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-
-int inflateIncomp(z)
-z_stream *z;
-{
- if (z->state->mode != BLOCKS)
- return Z_DATA_ERROR;
- return inflate_addhistory(z->state->blocks, z);
-}
-
-
-int inflateSync(z)
-z_stream *z;
-{
- uInt n; /* number of bytes to look at */
- Bytef *p; /* pointer to bytes */
- uInt m; /* number of marker bytes found in a row */
- uLong r, w; /* temporaries to save total_in and total_out */
-
- /* set up */
- if (z == Z_NULL || z->state == Z_NULL)
- return Z_STREAM_ERROR;
- if (z->state->mode != BAD)
- {
- z->state->mode = BAD;
- z->state->sub.marker = 0;
- }
- if ((n = z->avail_in) == 0)
- return Z_BUF_ERROR;
- p = z->next_in;
- m = z->state->sub.marker;
-
- /* search */
- while (n && m < 4)
- {
- if (*p == (Byte)(m < 2 ? 0 : 0xff))
- m++;
- else if (*p)
- m = 0;
- else
- m = 4 - m;
- p++, n--;
- }
-
- /* restore */
- z->total_in += p - z->next_in;
- z->next_in = p;
- z->avail_in = n;
- z->state->sub.marker = m;
-
- /* return no joy or set up to restart on a new block */
- if (m != 4)
- return Z_DATA_ERROR;
- r = z->total_in; w = z->total_out;
- inflateReset(z);
- z->total_in = r; z->total_out = w;
- z->state->mode = BLOCKS;
- return Z_OK;
-}
-
-#undef NEEDBYTE
-#undef NEXTBYTE
-
-/*+++++*/
-/* infutil.h -- types and macros common to blocks and codes
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/* inflate blocks semi-private state */
-struct inflate_blocks_state {
-
- /* mode */
- enum {
- TYPE, /* get type bits (3, including end bit) */
- LENS, /* get lengths for stored */
- STORED, /* processing stored block */
- TABLE, /* get table lengths */
- BTREE, /* get bit lengths tree for a dynamic block */
- DTREE, /* get length, distance trees for a dynamic block */
- CODES, /* processing fixed or dynamic block */
- DRY, /* output remaining window bytes */
- DONEB, /* finished last block, done */
- BADB} /* got a data error--stuck here */
- mode; /* current inflate_block mode */
-
- /* mode dependent information */
- union {
- uInt left; /* if STORED, bytes left to copy */
- struct {
- uInt table; /* table lengths (14 bits) */
- uInt index; /* index into blens (or border) */
- uIntf *blens; /* bit lengths of codes */
- uInt bb; /* bit length tree depth */
- inflate_huft *tb; /* bit length decoding tree */
- int nblens; /* # elements allocated at blens */
- } trees; /* if DTREE, decoding info for trees */
- struct {
- inflate_huft *tl, *td; /* trees to free */
- inflate_codes_statef
- *codes;
- } decode; /* if CODES, current state */
- } sub; /* submode */
- uInt last; /* true if this block is the last block */
-
- /* mode independent information */
- uInt bitk; /* bits in bit buffer */
- uLong bitb; /* bit buffer */
- Bytef *window; /* sliding window */
- Bytef *end; /* one byte after sliding window */
- Bytef *read; /* window read pointer */
- Bytef *write; /* window write pointer */
- check_func checkfn; /* check function */
- uLong check; /* check on output */
-
-};
-
-
-/* defines for inflate input/output */
-/* update pointers and return */
-#define UPDBITS {s->bitb=b;s->bitk=k;}
-#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;}
-#define UPDOUT {s->write=q;}
-#define UPDATE {UPDBITS UPDIN UPDOUT}
-#define LEAVE {UPDATE return inflate_flush(s,z,r);}
-/* get bytes and bits */
-#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
-#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
-#define NEXTBYTE (n--,*p++)
-#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define DUMPBITS(j) {b>>=(j);k-=(j);}
-/* output bytes */
-#define WAVAIL (q<s->read?s->read-q-1:s->end-q)
-#define LOADOUT {q=s->write;m=WAVAIL;}
-#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=WAVAIL;}}
-#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
-#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;}
-#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
-/* load local pointers */
-#define LOAD {LOADIN LOADOUT}
-
-/*
- * The IBM 150 firmware munges the data right after _etext[]. This
- * protects it. -- Cort
- */
-/* And'ing with mask[n] masks the lower n bits */
-local uInt inflate_mask[] = {
- 0x0000,
- 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
- 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
-};
-
-/* copy as much as possible from the sliding window to the output area */
-local int inflate_flush OF((
- inflate_blocks_statef *,
- z_stream *,
- int));
-
-/*+++++*/
-/* inffast.h -- header to use inffast.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-local int inflate_fast OF((
- uInt,
- uInt,
- inflate_huft *,
- inflate_huft *,
- inflate_blocks_statef *,
- z_stream *));
-
-
-/*+++++*/
-/* infblock.c -- interpret and process block types to last block
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* Table for deflate from PKZIP's appnote.txt. */
-local uInt border[] = { /* Order of the bit length code lengths */
- 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-/*
- Notes beyond the 1.93a appnote.txt:
-
- 1. Distance pointers never point before the beginning of the output
- stream.
- 2. Distance pointers can point back across blocks, up to 32k away.
- 3. There is an implied maximum of 7 bits for the bit length table and
- 15 bits for the actual data.
- 4. If only one code exists, then it is encoded using one bit. (Zero
- would be more efficient, but perhaps a little confusing.) If two
- codes exist, they are coded using one bit each (0 and 1).
- 5. There is no way of sending zero distance codes--a dummy must be
- sent if there are none. (History: a pre 2.0 version of PKZIP would
- store blocks with no distance codes, but this was discovered to be
- too harsh a criterion.) Valid only for 1.93a. 2.04c does allow
- zero distance codes, which is sent as one code of zero bits in
- length.
- 6. There are up to 286 literal/length codes. Code 256 represents the
- end-of-block. Note however that the static length tree defines
- 288 codes just to fill out the Huffman codes. Codes 286 and 287
- cannot be used though, since there is no length base or extra bits
- defined for them. Similarily, there are up to 30 distance codes.
- However, static trees define 32 codes (all 5 bits) to fill out the
- Huffman codes, but the last two had better not show up in the data.
- 7. Unzip can check dynamic Huffman blocks for complete code sets.
- The exception is that a single code would not be complete (see #4).
- 8. The five bits following the block type is really the number of
- literal codes sent minus 257.
- 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
- (1+6+6). Therefore, to output three times the length, you output
- three codes (1+1+1), whereas to output four times the same length,
- you only need two codes (1+3). Hmm.
- 10. In the tree reconstruction algorithm, Code = Code + Increment
- only if BitLength(i) is not zero. (Pretty obvious.)
- 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19)
- 12. Note: length code 284 can represent 227-258, but length code 285
- really is 258. The last length deserves its own, short code
- since it gets used a lot in very redundant files. The length
- 258 is special since 258 - 3 (the min match length) is 255.
- 13. The literal/length and distance code bit lengths are read as a
- single stream of lengths. It is possible (and advantageous) for
- a repeat code (16, 17, or 18) to go across the boundary between
- the two sets of lengths.
- */
-
-
-local void inflate_blocks_reset(s, z, c)
-inflate_blocks_statef *s;
-z_stream *z;
-uLongf *c;
-{
- if (s->checkfn != Z_NULL)
- *c = s->check;
- if (s->mode == BTREE || s->mode == DTREE)
- ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt));
- if (s->mode == CODES)
- {
- inflate_codes_free(s->sub.decode.codes, z);
- inflate_trees_free(s->sub.decode.td, z);
- inflate_trees_free(s->sub.decode.tl, z);
- }
- s->mode = TYPE;
- s->bitk = 0;
- s->bitb = 0;
- s->read = s->write = s->window;
- if (s->checkfn != Z_NULL)
- s->check = (*s->checkfn)(0L, Z_NULL, 0);
- if (z->outcb != Z_NULL)
- (*z->outcb)(Z_NULL, 0);
- Trace((stderr, "inflate: blocks reset\n"));
-}
-
-
-local inflate_blocks_statef *inflate_blocks_new(z, c, w)
-z_stream *z;
-check_func c;
-uInt w;
-{
- inflate_blocks_statef *s;
-
- if ((s = (inflate_blocks_statef *)ZALLOC
- (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
- return s;
- if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
- {
- ZFREE(z, s, sizeof(struct inflate_blocks_state));
- return Z_NULL;
- }
- s->end = s->window + w;
- s->checkfn = c;
- s->mode = TYPE;
- Trace((stderr, "inflate: blocks allocated\n"));
- inflate_blocks_reset(s, z, &s->check);
- return s;
-}
-
-
-local int inflate_blocks(s, z, r)
-inflate_blocks_statef *s;
-z_stream *z;
-int r;
-{
- uInt t; /* temporary storage */
- uLong b; /* bit buffer */
- uInt k; /* bits in bit buffer */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
-
- /* copy input/output information to locals (UPDATE macro restores) */
- LOAD
-
- /* process input based on current state */
- while (1) switch (s->mode)
- {
- case TYPE:
- NEEDBITS(3)
- t = (uInt)b & 7;
- s->last = t & 1;
- switch (t >> 1)
- {
- case 0: /* stored */
- Trace((stderr, "inflate: stored block%s\n",
- s->last ? " (last)" : ""));
- DUMPBITS(3)
- t = k & 7; /* go to byte boundary */
- DUMPBITS(t)
- s->mode = LENS; /* get length of stored block */
- break;
- case 1: /* fixed */
- Trace((stderr, "inflate: fixed codes block%s\n",
- s->last ? " (last)" : ""));
- {
- uInt bl, bd;
- inflate_huft *tl, *td;
-
- inflate_trees_fixed(&bl, &bd, &tl, &td);
- s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
- if (s->sub.decode.codes == Z_NULL)
- {
- r = Z_MEM_ERROR;
- LEAVE
- }
- s->sub.decode.tl = Z_NULL; /* don't try to free these */
- s->sub.decode.td = Z_NULL;
- }
- DUMPBITS(3)
- s->mode = CODES;
- break;
- case 2: /* dynamic */
- Trace((stderr, "inflate: dynamic codes block%s\n",
- s->last ? " (last)" : ""));
- DUMPBITS(3)
- s->mode = TABLE;
- break;
- case 3: /* illegal */
- DUMPBITS(3)
- s->mode = BADB;
- z->msg = "invalid block type";
- r = Z_DATA_ERROR;
- LEAVE
- }
- break;
- case LENS:
- NEEDBITS(32)
- if (((~b) >> 16) != (b & 0xffff))
- {
- s->mode = BADB;
- z->msg = "invalid stored block lengths";
- r = Z_DATA_ERROR;
- LEAVE
- }
- s->sub.left = (uInt)b & 0xffff;
- b = k = 0; /* dump bits */
- Tracev((stderr, "inflate: stored length %u\n", s->sub.left));
- s->mode = s->sub.left ? STORED : TYPE;
- break;
- case STORED:
- if (n == 0)
- LEAVE
- NEEDOUT
- t = s->sub.left;
- if (t > n) t = n;
- if (t > m) t = m;
- zmemcpy(q, p, t);
- p += t; n -= t;
- q += t; m -= t;
- if ((s->sub.left -= t) != 0)
- break;
- Tracev((stderr, "inflate: stored end, %lu total out\n",
- z->total_out + (q >= s->read ? q - s->read :
- (s->end - s->read) + (q - s->window))));
- s->mode = s->last ? DRY : TYPE;
- break;
- case TABLE:
- NEEDBITS(14)
- s->sub.trees.table = t = (uInt)b & 0x3fff;
-#ifndef PKZIP_BUG_WORKAROUND
- if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
- {
- s->mode = BADB;
- z->msg = "too many length or distance symbols";
- r = Z_DATA_ERROR;
- LEAVE
- }
-#endif
- t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
- if (t < 19)
- t = 19;
- if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
- {
- r = Z_MEM_ERROR;
- LEAVE
- }
- s->sub.trees.nblens = t;
- DUMPBITS(14)
- s->sub.trees.index = 0;
- Tracev((stderr, "inflate: table sizes ok\n"));
- s->mode = BTREE;
- case BTREE:
- while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
- {
- NEEDBITS(3)
- s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
- DUMPBITS(3)
- }
- while (s->sub.trees.index < 19)
- s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
- s->sub.trees.bb = 7;
- t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
- &s->sub.trees.tb, z);
- if (t != Z_OK)
- {
- r = t;
- if (r == Z_DATA_ERROR)
- s->mode = BADB;
- LEAVE
- }
- s->sub.trees.index = 0;
- Tracev((stderr, "inflate: bits tree ok\n"));
- s->mode = DTREE;
- case DTREE:
- while (t = s->sub.trees.table,
- s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
- {
- inflate_huft *h;
- uInt i, j, c;
-
- t = s->sub.trees.bb;
- NEEDBITS(t)
- h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
- t = h->word.what.Bits;
- c = h->more.Base;
- if (c < 16)
- {
- DUMPBITS(t)
- s->sub.trees.blens[s->sub.trees.index++] = c;
- }
- else /* c == 16..18 */
- {
- i = c == 18 ? 7 : c - 14;
- j = c == 18 ? 11 : 3;
- NEEDBITS(t + i)
- DUMPBITS(t)
- j += (uInt)b & inflate_mask[i];
- DUMPBITS(i)
- i = s->sub.trees.index;
- t = s->sub.trees.table;
- if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
- (c == 16 && i < 1))
- {
- s->mode = BADB;
- z->msg = "invalid bit length repeat";
- r = Z_DATA_ERROR;
- LEAVE
- }
- c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
- do {
- s->sub.trees.blens[i++] = c;
- } while (--j);
- s->sub.trees.index = i;
- }
- }
- inflate_trees_free(s->sub.trees.tb, z);
- s->sub.trees.tb = Z_NULL;
- {
- uInt bl, bd;
- inflate_huft *tl, *td;
- inflate_codes_statef *c;
-
- bl = 9; /* must be <= 9 for lookahead assumptions */
- bd = 6; /* must be <= 9 for lookahead assumptions */
- t = s->sub.trees.table;
- t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
- s->sub.trees.blens, &bl, &bd, &tl, &td, z);
- if (t != Z_OK)
- {
- if (t == (uInt)Z_DATA_ERROR)
- s->mode = BADB;
- r = t;
- LEAVE
- }
- Tracev((stderr, "inflate: trees ok\n"));
- if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
- {
- inflate_trees_free(td, z);
- inflate_trees_free(tl, z);
- r = Z_MEM_ERROR;
- LEAVE
- }
- ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt));
- s->sub.decode.codes = c;
- s->sub.decode.tl = tl;
- s->sub.decode.td = td;
- }
- s->mode = CODES;
- case CODES:
- UPDATE
- if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)
- return inflate_flush(s, z, r);
- r = Z_OK;
- inflate_codes_free(s->sub.decode.codes, z);
- inflate_trees_free(s->sub.decode.td, z);
- inflate_trees_free(s->sub.decode.tl, z);
- LOAD
- Tracev((stderr, "inflate: codes end, %lu total out\n",
- z->total_out + (q >= s->read ? q - s->read :
- (s->end - s->read) + (q - s->window))));
- if (!s->last)
- {
- s->mode = TYPE;
- break;
- }
- if (k > 7) /* return unused byte, if any */
- {
- Assert(k < 16, "inflate_codes grabbed too many bytes")
- k -= 8;
- n++;
- p--; /* can always return one */
- }
- s->mode = DRY;
- case DRY:
- FLUSH
- if (s->read != s->write)
- LEAVE
- s->mode = DONEB;
- case DONEB:
- r = Z_STREAM_END;
- LEAVE
- case BADB:
- r = Z_DATA_ERROR;
- LEAVE
- default:
- r = Z_STREAM_ERROR;
- LEAVE
- }
-}
-
-
-local int inflate_blocks_free(s, z, c)
-inflate_blocks_statef *s;
-z_stream *z;
-uLongf *c;
-{
- inflate_blocks_reset(s, z, c);
- ZFREE(z, s->window, s->end - s->window);
- ZFREE(z, s, sizeof(struct inflate_blocks_state));
- Trace((stderr, "inflate: blocks freed\n"));
- return Z_OK;
-}
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output. The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS). On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-local int inflate_addhistory(s, z)
-inflate_blocks_statef *s;
-z_stream *z;
-{
- uLong b; /* bit buffer */ /* NOT USED HERE */
- uInt k; /* bits in bit buffer */ /* NOT USED HERE */
- uInt t; /* temporary storage */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
-
- if (s->read != s->write)
- return Z_STREAM_ERROR;
- if (s->mode != TYPE)
- return Z_DATA_ERROR;
-
- /* we're ready to rock */
- LOAD
- /* while there is input ready, copy to output buffer, moving
- * pointers as needed.
- */
- while (n) {
- t = n; /* how many to do */
- /* is there room until end of buffer? */
- if (t > m) t = m;
- /* update check information */
- if (s->checkfn != Z_NULL)
- s->check = (*s->checkfn)(s->check, q, t);
- /* output callback */
- if (z->outcb != Z_NULL)
- (*z->outcb)(q, t);
- zmemcpy(q, p, t);
- q += t;
- p += t;
- n -= t;
- z->total_out += t;
- s->read = q; /* drag read pointer forward */
-/* WRAP */ /* expand WRAP macro by hand to handle s->read */
- if (q == s->end) {
- s->read = q = s->window;
- m = WAVAIL;
- }
- }
- UPDATE
- return Z_OK;
-}
-
-
-/*
- * At the end of a Deflate-compressed PPP packet, we expect to have seen
- * a `stored' block type value but not the (zero) length bytes.
- */
-local int inflate_packet_flush(s)
- inflate_blocks_statef *s;
-{
- if (s->mode != LENS)
- return Z_DATA_ERROR;
- s->mode = TYPE;
- return Z_OK;
-}
-
-
-/*+++++*/
-/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-
-local int huft_build OF((
- uIntf *, /* code lengths in bits */
- uInt, /* number of codes */
- uInt, /* number of "simple" codes */
- uIntf *, /* list of base values for non-simple codes */
- uIntf *, /* list of extra bits for non-simple codes */
- inflate_huft * FAR*,/* result: starting table */
- uIntf *, /* maximum lookup bits (returns actual) */
- z_stream *)); /* for zalloc function */
-
-local voidpf falloc OF((
- voidpf, /* opaque pointer (not used) */
- uInt, /* number of items */
- uInt)); /* size of item */
-
-local void ffree OF((
- voidpf q, /* opaque pointer (not used) */
- voidpf p, /* what to free (not used) */
- uInt n)); /* number of bytes (not used) */
-
-/* Tables for deflate from PKZIP's appnote.txt. */
-local uInt cplens[] = { /* Copy lengths for literal codes 257..285 */
- 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
- 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
- /* actually lengths - 2; also see note #13 above about 258 */
-local uInt cplext[] = { /* Extra bits for literal codes 257..285 */
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
- 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 192, 192}; /* 192==invalid */
-local uInt cpdist[] = { /* Copy offsets for distance codes 0..29 */
- 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
- 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
- 8193, 12289, 16385, 24577};
-local uInt cpdext[] = { /* Extra bits for distance codes */
- 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
- 7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
- 12, 12, 13, 13};
-
-/*
- Huffman code decoding is performed using a multi-level table lookup.
- The fastest way to decode is to simply build a lookup table whose
- size is determined by the longest code. However, the time it takes
- to build this table can also be a factor if the data being decoded
- is not very long. The most common codes are necessarily the
- shortest codes, so those codes dominate the decoding time, and hence
- the speed. The idea is you can have a shorter table that decodes the
- shorter, more probable codes, and then point to subsidiary tables for
- the longer codes. The time it costs to decode the longer codes is
- then traded against the time it takes to make longer tables.
-
- This results of this trade are in the variables lbits and dbits
- below. lbits is the number of bits the first level table for literal/
- length codes can decode in one step, and dbits is the same thing for
- the distance codes. Subsequent tables are also less than or equal to
- those sizes. These values may be adjusted either when all of the
- codes are shorter than that, in which case the longest code length in
- bits is used, or when the shortest code is *longer* than the requested
- table size, in which case the length of the shortest code in bits is
- used.
-
- There are two different values for the two tables, since they code a
- different number of possibilities each. The literal/length table
- codes 286 possible values, or in a flat code, a little over eight
- bits. The distance table codes 30 possible values, or a little less
- than five bits, flat. The optimum values for speed end up being
- about one bit more than those, so lbits is 8+1 and dbits is 5+1.
- The optimum values may differ though from machine to machine, and
- possibly even between compilers. Your mileage may vary.
- */
-
-
-/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
-#define BMAX 15 /* maximum bit length of any code */
-#define N_MAX 288 /* maximum number of codes in any set */
-
-#ifdef DEBUG_ZLIB
- uInt inflate_hufts;
-#endif
-
-local int huft_build(b, n, s, d, e, t, m, zs)
-uIntf *b; /* code lengths in bits (all assumed <= BMAX) */
-uInt n; /* number of codes (assumed <= N_MAX) */
-uInt s; /* number of simple-valued codes (0..s-1) */
-uIntf *d; /* list of base values for non-simple codes */
-uIntf *e; /* list of extra bits for non-simple codes */
-inflate_huft * FAR *t; /* result: starting table */
-uIntf *m; /* maximum lookup bits, returns actual */
-z_stream *zs; /* for zalloc function */
-/* Given a list of code lengths and a maximum table size, make a set of
- tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR
- if the given code set is incomplete (the tables are still built in this
- case), Z_DATA_ERROR if the input is invalid (all zero length codes or an
- over-subscribed set of lengths), or Z_MEM_ERROR if not enough memory. */
-{
-
- uInt a; /* counter for codes of length k */
- uInt c[BMAX+1]; /* bit length count table */
- uInt f; /* i repeats in table every f entries */
- int g; /* maximum code length */
- int h; /* table level */
- register uInt i; /* counter, current code */
- register uInt j; /* counter */
- register int k; /* number of bits in current code */
- int l; /* bits per table (returned in m) */
- register uIntf *p; /* pointer into c[], b[], or v[] */
- inflate_huft *q; /* points to current table */
- struct inflate_huft_s r; /* table entry for structure assignment */
- inflate_huft *u[BMAX]; /* table stack */
- uInt v[N_MAX]; /* values in order of bit length */
- register int w; /* bits before this table == (l * h) */
- uInt x[BMAX+1]; /* bit offsets, then code stack */
- uIntf *xp; /* pointer into x */
- int y; /* number of dummy codes added */
- uInt z; /* number of entries in current table */
-
-
- /* Generate counts for each bit length */
- p = c;
-#define C0 *p++ = 0;
-#define C2 C0 C0 C0 C0
-#define C4 C2 C2 C2 C2
- C4 /* clear c[]--assume BMAX+1 is 16 */
- p = b; i = n;
- do {
- c[*p++]++; /* assume all entries <= BMAX */
- } while (--i);
- if (c[0] == n) /* null input--all zero length codes */
- {
- *t = (inflate_huft *)Z_NULL;
- *m = 0;
- return Z_OK;
- }
-
-
- /* Find minimum and maximum length, bound *m by those */
- l = *m;
- for (j = 1; j <= BMAX; j++)
- if (c[j])
- break;
- k = j; /* minimum code length */
- if ((uInt)l < j)
- l = j;
- for (i = BMAX; i; i--)
- if (c[i])
- break;
- g = i; /* maximum code length */
- if ((uInt)l > i)
- l = i;
- *m = l;
-
-
- /* Adjust last length count to fill out codes, if needed */
- for (y = 1 << j; j < i; j++, y <<= 1)
- if ((y -= c[j]) < 0)
- return Z_DATA_ERROR;
- if ((y -= c[i]) < 0)
- return Z_DATA_ERROR;
- c[i] += y;
-
-
- /* Generate starting offsets into the value table for each length */
- x[1] = j = 0;
- p = c + 1; xp = x + 2;
- while (--i) { /* note that i == g from above */
- *xp++ = (j += *p++);
- }
-
-
- /* Make a table of values in order of bit lengths */
- p = b; i = 0;
- do {
- if ((j = *p++) != 0)
- v[x[j]++] = i;
- } while (++i < n);
-
-
- /* Generate the Huffman codes and for each, make the table entries */
- x[0] = i = 0; /* first Huffman code is zero */
- p = v; /* grab values in bit order */
- h = -1; /* no tables yet--level -1 */
- w = -l; /* bits decoded == (l * h) */
- u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */
- q = (inflate_huft *)Z_NULL; /* ditto */
- z = 0; /* ditto */
-
- /* go through the bit lengths (k already is bits in shortest code) */
- for (; k <= g; k++)
- {
- a = c[k];
- while (a--)
- {
- /* here i is the Huffman code of length k bits for value *p */
- /* make tables up to required level */
- while (k > w + l)
- {
- h++;
- w += l; /* previous table always l bits */
-
- /* compute minimum size table less than or equal to l bits */
- z = (z = g - w) > (uInt)l ? l : z; /* table size upper limit */
- if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */
- { /* too few codes for k-w bit table */
- f -= a + 1; /* deduct codes from patterns left */
- xp = c + k;
- if (j < z)
- while (++j < z) /* try smaller tables up to z bits */
- {
- if ((f <<= 1) <= *++xp)
- break; /* enough codes to use up j bits */
- f -= *xp; /* else deduct codes from patterns */
- }
- }
- z = 1 << j; /* table entries for j-bit table */
-
- /* allocate and link in new table */
- if ((q = (inflate_huft *)ZALLOC
- (zs,z + 1,sizeof(inflate_huft))) == Z_NULL)
- {
- if (h)
- inflate_trees_free(u[0], zs);
- return Z_MEM_ERROR; /* not enough memory */
- }
- q->word.Nalloc = z + 1;
-#ifdef DEBUG_ZLIB
- inflate_hufts += z + 1;
-#endif
- *t = q + 1; /* link to list for huft_free() */
- *(t = &(q->next)) = Z_NULL;
- u[h] = ++q; /* table starts after link */
-
- /* connect to last table, if there is one */
- if (h)
- {
- x[h] = i; /* save pattern for backing up */
- r.bits = (Byte)l; /* bits to dump before this table */
- r.exop = (Byte)j; /* bits in this table */
- r.next = q; /* pointer to this table */
- j = i >> (w - l); /* (get around Turbo C bug) */
- u[h-1][j] = r; /* connect to last table */
- }
- }
-
- /* set up table entry in r */
- r.bits = (Byte)(k - w);
- if (p >= v + n)
- r.exop = 128 + 64; /* out of values--invalid code */
- else if (*p < s)
- {
- r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */
- r.base = *p++; /* simple code is just the value */
- }
- else
- {
- r.exop = (Byte)e[*p - s] + 16 + 64; /* non-simple--look up in lists */
- r.base = d[*p++ - s];
- }
-
- /* fill code-like entries with r */
- f = 1 << (k - w);
- for (j = i >> w; j < z; j += f)
- q[j] = r;
-
- /* backwards increment the k-bit code i */
- for (j = 1 << (k - 1); i & j; j >>= 1)
- i ^= j;
- i ^= j;
-
- /* backup over finished tables */
- while ((i & ((1 << w) - 1)) != x[h])
- {
- h--; /* don't need to update q */
- w -= l;
- }
- }
- }
-
-
- /* Return Z_BUF_ERROR if we were given an incomplete table */
- return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
-}
-
-
-local int inflate_trees_bits(c, bb, tb, z)
-uIntf *c; /* 19 code lengths */
-uIntf *bb; /* bits tree desired/actual depth */
-inflate_huft * FAR *tb; /* bits tree result */
-z_stream *z; /* for zfree function */
-{
- int r;
-
- r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z);
- if (r == Z_DATA_ERROR)
- z->msg = "oversubscribed dynamic bit lengths tree";
- else if (r == Z_BUF_ERROR)
- {
- inflate_trees_free(*tb, z);
- z->msg = "incomplete dynamic bit lengths tree";
- r = Z_DATA_ERROR;
- }
- return r;
-}
-
-
-local int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z)
-uInt nl; /* number of literal/length codes */
-uInt nd; /* number of distance codes */
-uIntf *c; /* that many (total) code lengths */
-uIntf *bl; /* literal desired/actual bit depth */
-uIntf *bd; /* distance desired/actual bit depth */
-inflate_huft * FAR *tl; /* literal/length tree result */
-inflate_huft * FAR *td; /* distance tree result */
-z_stream *z; /* for zfree function */
-{
- int r;
-
- /* build literal/length tree */
- if ((r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z)) != Z_OK)
- {
- if (r == Z_DATA_ERROR)
- z->msg = "oversubscribed literal/length tree";
- else if (r == Z_BUF_ERROR)
- {
- inflate_trees_free(*tl, z);
- z->msg = "incomplete literal/length tree";
- r = Z_DATA_ERROR;
- }
- return r;
- }
-
- /* build distance tree */
- if ((r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z)) != Z_OK)
- {
- if (r == Z_DATA_ERROR)
- z->msg = "oversubscribed literal/length tree";
- else if (r == Z_BUF_ERROR) {
-#ifdef PKZIP_BUG_WORKAROUND
- r = Z_OK;
- }
-#else
- inflate_trees_free(*td, z);
- z->msg = "incomplete literal/length tree";
- r = Z_DATA_ERROR;
- }
- inflate_trees_free(*tl, z);
- return r;
-#endif
- }
-
- /* done */
- return Z_OK;
-}
-
-
-/* build fixed tables only once--keep them here */
-local int fixed_lock = 0;
-local int fixed_built = 0;
-#define FIXEDH 530 /* number of hufts used by fixed tables */
-local uInt fixed_left = FIXEDH;
-local inflate_huft fixed_mem[FIXEDH];
-local uInt fixed_bl;
-local uInt fixed_bd;
-local inflate_huft *fixed_tl;
-local inflate_huft *fixed_td;
-
-
-local voidpf falloc(q, n, s)
-voidpf q; /* opaque pointer (not used) */
-uInt n; /* number of items */
-uInt s; /* size of item */
-{
- Assert(s == sizeof(inflate_huft) && n <= fixed_left,
- "inflate_trees falloc overflow");
- if (q) s++; /* to make some compilers happy */
- fixed_left -= n;
- return (voidpf)(fixed_mem + fixed_left);
-}
-
-
-local void ffree(q, p, n)
-voidpf q;
-voidpf p;
-uInt n;
-{
- Assert(0, "inflate_trees ffree called!");
- if (q) q = p; /* to make some compilers happy */
-}
-
-
-local int inflate_trees_fixed(bl, bd, tl, td)
-uIntf *bl; /* literal desired/actual bit depth */
-uIntf *bd; /* distance desired/actual bit depth */
-inflate_huft * FAR *tl; /* literal/length tree result */
-inflate_huft * FAR *td; /* distance tree result */
-{
- /* build fixed tables if not built already--lock out other instances */
- while (++fixed_lock > 1)
- fixed_lock--;
- if (!fixed_built)
- {
- int k; /* temporary variable */
- unsigned c[288]; /* length list for huft_build */
- z_stream z; /* for falloc function */
-
- /* set up fake z_stream for memory routines */
- z.zalloc = falloc;
- z.zfree = ffree;
- z.opaque = Z_NULL;
-
- /* literal table */
- for (k = 0; k < 144; k++)
- c[k] = 8;
- for (; k < 256; k++)
- c[k] = 9;
- for (; k < 280; k++)
- c[k] = 7;
- for (; k < 288; k++)
- c[k] = 8;
- fixed_bl = 7;
- huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z);
-
- /* distance table */
- for (k = 0; k < 30; k++)
- c[k] = 5;
- fixed_bd = 5;
- huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z);
-
- /* done */
- fixed_built = 1;
- }
- fixed_lock--;
- *bl = fixed_bl;
- *bd = fixed_bd;
- *tl = fixed_tl;
- *td = fixed_td;
- return Z_OK;
-}
-
-
-local int inflate_trees_free(t, z)
-inflate_huft *t; /* table to free */
-z_stream *z; /* for zfree function */
-/* Free the malloc'ed tables built by huft_build(), which makes a linked
- list of the tables it made, with the links in a dummy first entry of
- each table. */
-{
- register inflate_huft *p, *q;
-
- /* Go through linked list, freeing from the malloced (t[-1]) address. */
- p = t;
- while (p != Z_NULL)
- {
- q = (--p)->next;
- ZFREE(z, p, p->word.Nalloc * sizeof(inflate_huft));
- p = q;
- }
- return Z_OK;
-}
-
-/*+++++*/
-/* infcodes.c -- process literals and length/distance pairs
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* inflate codes private state */
-struct inflate_codes_state {
-
- /* mode */
- enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
- START, /* x: set up for LEN */
- LEN, /* i: get length/literal/eob next */
- LENEXT, /* i: getting length extra (have base) */
- DIST, /* i: get distance next */
- DISTEXT, /* i: getting distance extra */
- COPY, /* o: copying bytes in window, waiting for space */
- LIT, /* o: got literal, waiting for output space */
- WASH, /* o: got eob, possibly still output waiting */
- END, /* x: got eob and all data flushed */
- BADCODE} /* x: got error */
- mode; /* current inflate_codes mode */
-
- /* mode dependent information */
- uInt len;
- union {
- struct {
- inflate_huft *tree; /* pointer into tree */
- uInt need; /* bits needed */
- } code; /* if LEN or DIST, where in tree */
- uInt lit; /* if LIT, literal */
- struct {
- uInt get; /* bits to get for extra */
- uInt dist; /* distance back to copy from */
- } copy; /* if EXT or COPY, where and how much */
- } sub; /* submode */
-
- /* mode independent information */
- Byte lbits; /* ltree bits decoded per branch */
- Byte dbits; /* dtree bits decoder per branch */
- inflate_huft *ltree; /* literal/length/eob tree */
- inflate_huft *dtree; /* distance tree */
-
-};
-
-
-local inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z)
-uInt bl, bd;
-inflate_huft *tl, *td;
-z_stream *z;
-{
- inflate_codes_statef *c;
-
- if ((c = (inflate_codes_statef *)
- ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)
- {
- c->mode = START;
- c->lbits = (Byte)bl;
- c->dbits = (Byte)bd;
- c->ltree = tl;
- c->dtree = td;
- Tracev((stderr, "inflate: codes new\n"));
- }
- return c;
-}
-
-
-local int inflate_codes(s, z, r)
-inflate_blocks_statef *s;
-z_stream *z;
-int r;
-{
- uInt j; /* temporary storage */
- inflate_huft *t; /* temporary pointer */
- uInt e; /* extra bits or operation */
- uLong b; /* bit buffer */
- uInt k; /* bits in bit buffer */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
- Bytef *f; /* pointer to copy strings from */
- inflate_codes_statef *c = s->sub.decode.codes; /* codes state */
-
- /* copy input/output information to locals (UPDATE macro restores) */
- LOAD
-
- /* process input and output based on current state */
- while (1) switch (c->mode)
- { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
- case START: /* x: set up for LEN */
-#ifndef SLOW
- if (m >= 258 && n >= 10)
- {
- UPDATE
- r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
- LOAD
- if (r != Z_OK)
- {
- c->mode = r == Z_STREAM_END ? WASH : BADCODE;
- break;
- }
- }
-#endif /* !SLOW */
- c->sub.code.need = c->lbits;
- c->sub.code.tree = c->ltree;
- c->mode = LEN;
- case LEN: /* i: get length/literal/eob next */
- j = c->sub.code.need;
- NEEDBITS(j)
- t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
- DUMPBITS(t->bits)
- e = (uInt)(t->exop);
- if (e == 0) /* literal */
- {
- c->sub.lit = t->base;
- Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
- "inflate: literal '%c'\n" :
- "inflate: literal 0x%02x\n", t->base));
- c->mode = LIT;
- break;
- }
- if (e & 16) /* length */
- {
- c->sub.copy.get = e & 15;
- c->len = t->base;
- c->mode = LENEXT;
- break;
- }
- if ((e & 64) == 0) /* next table */
- {
- c->sub.code.need = e;
- c->sub.code.tree = t->next;
- break;
- }
- if (e & 32) /* end of block */
- {
- Tracevv((stderr, "inflate: end of block\n"));
- c->mode = WASH;
- break;
- }
- c->mode = BADCODE; /* invalid code */
- z->msg = "invalid literal/length code";
- r = Z_DATA_ERROR;
- LEAVE
- case LENEXT: /* i: getting length extra (have base) */
- j = c->sub.copy.get;
- NEEDBITS(j)
- c->len += (uInt)b & inflate_mask[j];
- DUMPBITS(j)
- c->sub.code.need = c->dbits;
- c->sub.code.tree = c->dtree;
- Tracevv((stderr, "inflate: length %u\n", c->len));
- c->mode = DIST;
- case DIST: /* i: get distance next */
- j = c->sub.code.need;
- NEEDBITS(j)
- t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
- DUMPBITS(t->bits)
- e = (uInt)(t->exop);
- if (e & 16) /* distance */
- {
- c->sub.copy.get = e & 15;
- c->sub.copy.dist = t->base;
- c->mode = DISTEXT;
- break;
- }
- if ((e & 64) == 0) /* next table */
- {
- c->sub.code.need = e;
- c->sub.code.tree = t->next;
- break;
- }
- c->mode = BADCODE; /* invalid code */
- z->msg = "invalid distance code";
- r = Z_DATA_ERROR;
- LEAVE
- case DISTEXT: /* i: getting distance extra */
- j = c->sub.copy.get;
- NEEDBITS(j)
- c->sub.copy.dist += (uInt)b & inflate_mask[j];
- DUMPBITS(j)
- Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist));
- c->mode = COPY;
- case COPY: /* o: copying bytes in window, waiting for space */
-#ifndef __TURBOC__ /* Turbo C bug for following expression */
- f = (uInt)(q - s->window) < c->sub.copy.dist ?
- s->end - (c->sub.copy.dist - (q - s->window)) :
- q - c->sub.copy.dist;
-#else
- f = q - c->sub.copy.dist;
- if ((uInt)(q - s->window) < c->sub.copy.dist)
- f = s->end - (c->sub.copy.dist - (q - s->window));
-#endif
- while (c->len)
- {
- NEEDOUT
- OUTBYTE(*f++)
- if (f == s->end)
- f = s->window;
- c->len--;
- }
- c->mode = START;
- break;
- case LIT: /* o: got literal, waiting for output space */
- NEEDOUT
- OUTBYTE(c->sub.lit)
- c->mode = START;
- break;
- case WASH: /* o: got eob, possibly more output */
- FLUSH
- if (s->read != s->write)
- LEAVE
- c->mode = END;
- case END:
- r = Z_STREAM_END;
- LEAVE
- case BADCODE: /* x: got error */
- r = Z_DATA_ERROR;
- LEAVE
- default:
- r = Z_STREAM_ERROR;
- LEAVE
- }
-}
-
-
-local void inflate_codes_free(c, z)
-inflate_codes_statef *c;
-z_stream *z;
-{
- ZFREE(z, c, sizeof(struct inflate_codes_state));
- Tracev((stderr, "inflate: codes free\n"));
-}
-
-/*+++++*/
-/* inflate_util.c -- data and routines common to blocks and codes
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* copy as much as possible from the sliding window to the output area */
-local int inflate_flush(s, z, r)
-inflate_blocks_statef *s;
-z_stream *z;
-int r;
-{
- uInt n;
- Bytef *p, *q;
-
- /* local copies of source and destination pointers */
- p = z->next_out;
- q = s->read;
-
- /* compute number of bytes to copy as far as end of window */
- n = (uInt)((q <= s->write ? s->write : s->end) - q);
- if (n > z->avail_out) n = z->avail_out;
- if (n && r == Z_BUF_ERROR) r = Z_OK;
-
- /* update counters */
- z->avail_out -= n;
- z->total_out += n;
-
- /* update check information */
- if (s->checkfn != Z_NULL)
- s->check = (*s->checkfn)(s->check, q, n);
-
- /* output callback */
- if (z->outcb != Z_NULL)
- (*z->outcb)(q, n);
-
- /* copy as far as end of window */
- zmemcpy(p, q, n);
- p += n;
- q += n;
-
- /* see if more to copy at beginning of window */
- if (q == s->end)
- {
- /* wrap pointers */
- q = s->window;
- if (s->write == s->end)
- s->write = s->window;
-
- /* compute bytes to copy */
- n = (uInt)(s->write - q);
- if (n > z->avail_out) n = z->avail_out;
- if (n && r == Z_BUF_ERROR) r = Z_OK;
-
- /* update counters */
- z->avail_out -= n;
- z->total_out += n;
-
- /* update check information */
- if (s->checkfn != Z_NULL)
- s->check = (*s->checkfn)(s->check, q, n);
-
- /* output callback */
- if (z->outcb != Z_NULL)
- (*z->outcb)(q, n);
-
- /* copy */
- zmemcpy(p, q, n);
- p += n;
- q += n;
- }
-
- /* update pointers */
- z->next_out = p;
- s->read = q;
-
- /* done */
- return r;
-}
-
-
-/*+++++*/
-/* inffast.c -- process literals and length/distance pairs fast
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* macros for bit input with no checking and for returning unused bytes */
-#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define UNGRAB {n+=(c=k>>3);p-=c;k&=7;}
-
-/* Called with number of bytes left to write in window at least 258
- (the maximum string length) and number of input bytes available
- at least ten. The ten bytes are six bytes for the longest length/
- distance pair plus four bytes for overloading the bit buffer. */
-
-local int inflate_fast(bl, bd, tl, td, s, z)
-uInt bl, bd;
-inflate_huft *tl, *td;
-inflate_blocks_statef *s;
-z_stream *z;
-{
- inflate_huft *t; /* temporary pointer */
- uInt e; /* extra bits or operation */
- uLong b; /* bit buffer */
- uInt k; /* bits in bit buffer */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
- uInt ml; /* mask for literal/length tree */
- uInt md; /* mask for distance tree */
- uInt c; /* bytes to copy */
- uInt d; /* distance back to copy from */
- Bytef *r; /* copy source pointer */
-
- /* load input, output, bit values */
- LOAD
-
- /* initialize masks */
- ml = inflate_mask[bl];
- md = inflate_mask[bd];
-
- /* do until not enough input or output space for fast loop */
- do { /* assume called with m >= 258 && n >= 10 */
- /* get literal/length code */
- GRABBITS(20) /* max bits for literal/length code */
- if ((e = (t = tl + ((uInt)b & ml))->exop) == 0)
- {
- DUMPBITS(t->bits)
- Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
- "inflate: * literal '%c'\n" :
- "inflate: * literal 0x%02x\n", t->base));
- *q++ = (Byte)t->base;
- m--;
- continue;
- }
- do {
- DUMPBITS(t->bits)
- if (e & 16)
- {
- /* get extra bits for length */
- e &= 15;
- c = t->base + ((uInt)b & inflate_mask[e]);
- DUMPBITS(e)
- Tracevv((stderr, "inflate: * length %u\n", c));
-
- /* decode distance base of block to copy */
- GRABBITS(15); /* max bits for distance code */
- e = (t = td + ((uInt)b & md))->exop;
- do {
- DUMPBITS(t->bits)
- if (e & 16)
- {
- /* get extra bits to add to distance base */
- e &= 15;
- GRABBITS(e) /* get extra bits (up to 13) */
- d = t->base + ((uInt)b & inflate_mask[e]);
- DUMPBITS(e)
- Tracevv((stderr, "inflate: * distance %u\n", d));
-
- /* do the copy */
- m -= c;
- if ((uInt)(q - s->window) >= d) /* offset before dest */
- { /* just copy */
- r = q - d;
- *q++ = *r++; c--; /* minimum count is three, */
- *q++ = *r++; c--; /* so unroll loop a little */
- }
- else /* else offset after destination */
- {
- e = d - (q - s->window); /* bytes from offset to end */
- r = s->end - e; /* pointer to offset */
- if (c > e) /* if source crosses, */
- {
- c -= e; /* copy to end of window */
- do {
- *q++ = *r++;
- } while (--e);
- r = s->window; /* copy rest from start of window */
- }
- }
- do { /* copy all or what's left */
- *q++ = *r++;
- } while (--c);
- break;
- }
- else if ((e & 64) == 0)
- e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop;
- else
- {
- z->msg = "invalid distance code";
- UNGRAB
- UPDATE
- return Z_DATA_ERROR;
- }
- } while (1);
- break;
- }
- if ((e & 64) == 0)
- {
- if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0)
- {
- DUMPBITS(t->bits)
- Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
- "inflate: * literal '%c'\n" :
- "inflate: * literal 0x%02x\n", t->base));
- *q++ = (Byte)t->base;
- m--;
- break;
- }
- }
- else if (e & 32)
- {
- Tracevv((stderr, "inflate: * end of block\n"));
- UNGRAB
- UPDATE
- return Z_STREAM_END;
- }
- else
- {
- z->msg = "invalid literal/length code";
- UNGRAB
- UPDATE
- return Z_DATA_ERROR;
- }
- } while (1);
- } while (m >= 258 && n >= 10);
-
- /* not enough input or output--restore pointers and return */
- UNGRAB
- UPDATE
- return Z_OK;
-}
-
-
-/*+++++*/
-/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* From: zutil.c,v 1.8 1995/05/03 17:27:12 jloup Exp */
-
-char *zlib_version = ZLIB_VERSION;
-
-char *z_errmsg[] = {
-"stream end", /* Z_STREAM_END 1 */
-"", /* Z_OK 0 */
-"file error", /* Z_ERRNO (-1) */
-"stream error", /* Z_STREAM_ERROR (-2) */
-"data error", /* Z_DATA_ERROR (-3) */
-"insufficient memory", /* Z_MEM_ERROR (-4) */
-"buffer error", /* Z_BUF_ERROR (-5) */
-""};
-
-
-/*+++++*/
-/* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* From: adler32.c,v 1.6 1995/05/03 17:27:08 jloup Exp */
-
-#define BASE 65521L /* largest prime smaller than 65536 */
-#define NMAX 5552
-/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-
-#define DO1(buf) {s1 += *buf++; s2 += s1;}
-#define DO2(buf) DO1(buf); DO1(buf);
-#define DO4(buf) DO2(buf); DO2(buf);
-#define DO8(buf) DO4(buf); DO4(buf);
-#define DO16(buf) DO8(buf); DO8(buf);
-
-/* ========================================================================= */
-uLong adler32(adler, buf, len)
- uLong adler;
- Bytef *buf;
- uInt len;
-{
- unsigned long s1 = adler & 0xffff;
- unsigned long s2 = (adler >> 16) & 0xffff;
- int k;
-
- if (buf == Z_NULL) return 1L;
-
- while (len > 0) {
- k = len < NMAX ? len : NMAX;
- len -= k;
- while (k >= 16) {
- DO16(buf);
- k -= 16;
- }
- if (k != 0) do {
- DO1(buf);
- } while (--k);
- s1 %= BASE;
- s2 %= BASE;
- }
- return (s2 << 16) | s1;
-}
--
1.7.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH 07/16] remove old zlib
2011-11-28 22:10 ` [PATCH 07/16] remove old zlib Sascha Hauer
@ 2011-12-03 18:47 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 0 replies; 21+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2011-12-03 18:47 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
On 23:10 Mon 28 Nov , Sascha Hauer wrote:
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> include/zlib.h | 434 ------------
> lib/gunzip.c | 85 ---
> lib/zlib.c | 2158 --------------------------------------------------------
> 3 files changed, 0 insertions(+), 2677 deletions(-)
> delete mode 100644 include/zlib.h
> delete mode 100644 lib/gunzip.c
> delete mode 100644 lib/zlib.c
cramfs support is broken :(
Best Regards,
J.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 08/16] lib: prompt for uncompression functions
2011-11-28 22:09 uncompress work Sascha Hauer
` (6 preceding siblings ...)
2011-11-28 22:10 ` [PATCH 07/16] remove old zlib Sascha Hauer
@ 2011-11-28 22:10 ` Sascha Hauer
2011-11-28 22:10 ` [PATCH 09/16] bootm: do not select uncompression methods Sascha Hauer
` (7 subsequent siblings)
15 siblings, 0 replies; 21+ messages in thread
From: Sascha Hauer @ 2011-11-28 22:10 UTC (permalink / raw)
To: barebox
Allow the user to manually select the uncompression support
he wants to have so that we have a single point where a user
can see which uncompression support will be compiled in.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
lib/Kconfig | 6 ++++--
lib/lzo/Kconfig | 1 +
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/lib/Kconfig b/lib/Kconfig
index 531398f..e16dd35 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -1,8 +1,9 @@
+menu "Library routines"
config ZLIB
- bool
+ bool "include gzip uncompression support"
config BZLIB
- bool
+ bool "include bzip2 uncompression support"
config GENERIC_FIND_NEXT_BIT
def_bool n
@@ -18,3 +19,4 @@ config FDT
config OFTREE
select FDT
bool
+endmenu
diff --git a/lib/lzo/Kconfig b/lib/lzo/Kconfig
index 4016785..03c3350 100644
--- a/lib/lzo/Kconfig
+++ b/lib/lzo/Kconfig
@@ -1,4 +1,5 @@
config LZO_DECOMPRESS
+ bool "include lzo uncompression support"
bool
config LZO_COMPRESS
--
1.7.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH 09/16] bootm: do not select uncompression methods
2011-11-28 22:09 uncompress work Sascha Hauer
` (7 preceding siblings ...)
2011-11-28 22:10 ` [PATCH 08/16] lib: prompt for uncompression functions Sascha Hauer
@ 2011-11-28 22:10 ` Sascha Hauer
2011-11-28 22:10 ` [PATCH 10/16] add file detection support Sascha Hauer
` (6 subsequent siblings)
15 siblings, 0 replies; 21+ messages in thread
From: Sascha Hauer @ 2011-11-28 22:10 UTC (permalink / raw)
To: barebox
Instead, let the user select them manually so that bootm supports
all compression types compiled in.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
commands/Kconfig | 12 ------------
commands/bootm.c | 4 ++--
2 files changed, 2 insertions(+), 14 deletions(-)
diff --git a/commands/Kconfig b/commands/Kconfig
index 18ab840..e5c0fb5 100644
--- a/commands/Kconfig
+++ b/commands/Kconfig
@@ -292,18 +292,6 @@ config CMD_BOOTM
select CRC32
prompt "bootm"
-config CMD_BOOTM_ZLIB
- bool
- depends on CMD_BOOTM
- select ZLIB
- prompt "bootm with zlib support"
-
-config CMD_BOOTM_BZLIB
- bool
- depends on CMD_BOOTM
- select BZLIB
- prompt "bootm with bzlib support"
-
config CMD_BOOTM_SHOW_TYPE
bool
depends on CMD_BOOTM
diff --git a/commands/bootm.c b/commands/bootm.c
index 578e9a5..878b7aa 100644
--- a/commands/bootm.c
+++ b/commands/bootm.c
@@ -131,7 +131,7 @@ int relocate_image(struct image_handle *handle, void *load_address)
memmove ((void *) image_get_load(hdr), (uchar *)data, len);
}
break;
-#ifdef CONFIG_CMD_BOOTM_ZLIB
+#ifdef CONFIG_ZLIB
case IH_COMP_GZIP:
printf (" Uncompressing ... ");
@@ -141,7 +141,7 @@ int relocate_image(struct image_handle *handle, void *load_address)
return ret;
break;
#endif
-#ifdef CONFIG_CMD_BOOTM_BZLIB
+#ifdef CONFIG_BZLIB
case IH_COMP_BZIP2:
printf (" Uncompressing ... ");
--
1.7.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH 10/16] add file detection support
2011-11-28 22:09 uncompress work Sascha Hauer
` (8 preceding siblings ...)
2011-11-28 22:10 ` [PATCH 09/16] bootm: do not select uncompression methods Sascha Hauer
@ 2011-11-28 22:10 ` Sascha Hauer
2011-11-28 23:10 ` Marc Kleine-Budde
2011-11-29 19:40 ` Sascha Hauer
2011-11-28 22:10 ` [PATCH 11/16] lzo: export decompress_unlzo function Sascha Hauer
` (5 subsequent siblings)
15 siblings, 2 replies; 21+ messages in thread
From: Sascha Hauer @ 2011-11-28 22:10 UTC (permalink / raw)
To: barebox
Several filetypes can be autodetected. Barebox could make use
of this in several ways:
- Add a command to detect filetypes
- detect arm zImages and uImages to unify the different boot commands
- maybe detect UBI or JFFS2 images to construct parts of the kernel
command line
- select correct uncompression function based on filetype
This patch adds basic support to detect filetypes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
common/Makefile | 1 +
common/filetype.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++++++
include/filetype.h | 23 +++++++++++
3 files changed, 128 insertions(+), 0 deletions(-)
create mode 100644 common/filetype.c
create mode 100644 include/filetype.h
diff --git a/common/Makefile b/common/Makefile
index 3edf38f..55d9dbc 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_CMD_BOOTM) += image.o
obj-y += startup.o
obj-y += misc.o
obj-y += memsize.o
+obj-y += filetype.o
obj-$(CONFIG_MENU) += menu.o
obj-$(CONFIG_PASSWORD) += password.o
obj-$(CONFIG_MODULES) += module.o
diff --git a/common/filetype.c b/common/filetype.c
new file mode 100644
index 0000000..5d246b4
--- /dev/null
+++ b/common/filetype.c
@@ -0,0 +1,104 @@
+/*
+ * filetype.c - detect filetypes
+ *
+ * Copyright (c) 2011 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation.
+ */
+#include <common.h>
+#include <filetype.h>
+#include <asm/byteorder.h>
+#include <fcntl.h>
+#include <fs.h>
+#include <malloc.h>
+
+const char *file_type_to_string(enum filetype f)
+{
+ switch (f) {
+ case filetype_unknown:
+ return "unkown";
+ case filetype_arm_zimage:
+ return "arm Linux zImage";
+ case filetype_lzo_compressed:
+ return "lzo compressed";
+ case filetype_arm_barebox:
+ return "arm barebox image";
+ case filetype_uimage:
+ return "U-Boot uImage";
+ case filetype_ubi:
+ return "UBI image";
+ case filetype_jffs2:
+ return "JFFS2 image";
+ case filetype_gzip:
+ return "gzip compressed";
+ case filetype_bzip2:
+ return "bzip2 compressed";
+ }
+ return NULL;
+}
+
+enum filetype file_detect_type(void *_buf)
+{
+ u32 *buf = _buf;
+ u8 *buf8 = _buf;
+
+ if (buf[8] == 0x65726162 && buf[9] == 0x00786f62)
+ return filetype_arm_barebox;
+ if (buf[9] == 0x016f2818 || buf[9] == 0x18286f01)
+ return filetype_arm_zimage;
+ if (buf8[0] == 0x89 && buf8[1] == 0x4c && buf8[2] == 0x5a &&
+ buf8[3] == 0x4f)
+ return filetype_lzo_compressed;
+ if (buf[0] == be32_to_cpu(0x27051956))
+ return filetype_uimage;
+ if (buf[0] == 0x23494255)
+ return filetype_ubi;
+ if (buf[0] == 0x20031985)
+ return filetype_jffs2;
+ if (buf8[0] == 0x1f && buf8[1] == 0x8b && buf8[2] == 0x08)
+ return filetype_gzip;
+ if (buf8[0] == 'B' && buf8[1] == 'Z' && buf8[2] == 'h' &&
+ buf8[3] > '0' && buf8[3] <= '9')
+ return filetype_bzip2;
+
+ return filetype_unknown;
+}
+
+enum filetype file_name_detect_type(const char *filename)
+{
+ int fd, ret;
+ void *buf;
+ enum filetype type = filetype_unknown;
+
+ fd = open(filename, O_RDONLY);
+ if (fd < 0)
+ return fd;
+
+ buf = xmalloc(512);
+
+ ret = read(fd, buf, 512);
+ if (ret != 512)
+ goto err_out;
+
+ type = file_detect_type(buf);
+
+err_out:
+ close(fd);
+ free(buf);
+
+ return type;
+}
diff --git a/include/filetype.h b/include/filetype.h
new file mode 100644
index 0000000..64d32ef
--- /dev/null
+++ b/include/filetype.h
@@ -0,0 +1,23 @@
+#ifndef __FILE_TYPE_H
+#define __FILE_TYPE_H
+
+/*
+ * List of file types we know
+ */
+enum filetype {
+ filetype_unknown,
+ filetype_arm_zimage,
+ filetype_lzo_compressed,
+ filetype_arm_barebox,
+ filetype_uimage,
+ filetype_ubi,
+ filetype_jffs2,
+ filetype_gzip,
+ filetype_bzip2,
+};
+
+const char *file_type_to_string(enum filetype f);
+enum filetype file_detect_type(void *_buf);
+enum filetype file_name_detect_type(const char *filename);
+
+#endif /* __FILE_TYPE_H */
--
1.7.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH 10/16] add file detection support
2011-11-28 22:10 ` [PATCH 10/16] add file detection support Sascha Hauer
@ 2011-11-28 23:10 ` Marc Kleine-Budde
2011-11-29 19:41 ` Sascha Hauer
2011-11-29 19:40 ` Sascha Hauer
1 sibling, 1 reply; 21+ messages in thread
From: Marc Kleine-Budde @ 2011-11-28 23:10 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
[-- Attachment #1.1: Type: text/plain, Size: 5525 bytes --]
On 11/28/2011 11:10 PM, Sascha Hauer wrote:
> Several filetypes can be autodetected. Barebox could make use
> of this in several ways:
>
> - Add a command to detect filetypes
> - detect arm zImages and uImages to unify the different boot commands
> - maybe detect UBI or JFFS2 images to construct parts of the kernel
> command line
> - select correct uncompression function based on filetype
>
> This patch adds basic support to detect filetypes.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> common/Makefile | 1 +
> common/filetype.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> include/filetype.h | 23 +++++++++++
> 3 files changed, 128 insertions(+), 0 deletions(-)
> create mode 100644 common/filetype.c
> create mode 100644 include/filetype.h
>
> diff --git a/common/Makefile b/common/Makefile
> index 3edf38f..55d9dbc 100644
> --- a/common/Makefile
> +++ b/common/Makefile
> @@ -26,6 +26,7 @@ obj-$(CONFIG_CMD_BOOTM) += image.o
> obj-y += startup.o
> obj-y += misc.o
> obj-y += memsize.o
> +obj-y += filetype.o
> obj-$(CONFIG_MENU) += menu.o
> obj-$(CONFIG_PASSWORD) += password.o
> obj-$(CONFIG_MODULES) += module.o
> diff --git a/common/filetype.c b/common/filetype.c
> new file mode 100644
> index 0000000..5d246b4
> --- /dev/null
> +++ b/common/filetype.c
> @@ -0,0 +1,104 @@
> +/*
> + * filetype.c - detect filetypes
> + *
> + * Copyright (c) 2011 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2
> + * as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation.
> + */
> +#include <common.h>
> +#include <filetype.h>
> +#include <asm/byteorder.h>
> +#include <fcntl.h>
> +#include <fs.h>
> +#include <malloc.h>
> +
> +const char *file_type_to_string(enum filetype f)
> +{
you can use an const array char pointers here:
static const char *filetype_str[] = {
[filetype_unknown] = "unknown",
...
}
> + switch (f) {
> + case filetype_unknown:
> + return "unkown";
> + case filetype_arm_zimage:
> + return "arm Linux zImage";
> + case filetype_lzo_compressed:
> + return "lzo compressed";
> + case filetype_arm_barebox:
> + return "arm barebox image";
> + case filetype_uimage:
> + return "U-Boot uImage";
> + case filetype_ubi:
> + return "UBI image";
> + case filetype_jffs2:
> + return "JFFS2 image";
> + case filetype_gzip:
> + return "gzip compressed";
> + case filetype_bzip2:
> + return "bzip2 compressed";
> + }
> + return NULL;
> +}
> +
> +enum filetype file_detect_type(void *_buf)
> +{
> + u32 *buf = _buf;
> + u8 *buf8 = _buf;
> +
> + if (buf[8] == 0x65726162 && buf[9] == 0x00786f62)
> + return filetype_arm_barebox;
> + if (buf[9] == 0x016f2818 || buf[9] == 0x18286f01)
> + return filetype_arm_zimage;
> + if (buf8[0] == 0x89 && buf8[1] == 0x4c && buf8[2] == 0x5a &&
> + buf8[3] == 0x4f)
> + return filetype_lzo_compressed;
> + if (buf[0] == be32_to_cpu(0x27051956))
> + return filetype_uimage;
> + if (buf[0] == 0x23494255)
> + return filetype_ubi;
> + if (buf[0] == 0x20031985)
> + return filetype_jffs2;
> + if (buf8[0] == 0x1f && buf8[1] == 0x8b && buf8[2] == 0x08)
> + return filetype_gzip;
> + if (buf8[0] == 'B' && buf8[1] == 'Z' && buf8[2] == 'h' &&
> + buf8[3] > '0' && buf8[3] <= '9')
> + return filetype_bzip2;
> +
> + return filetype_unknown;
> +}
> +
> +enum filetype file_name_detect_type(const char *filename)
> +{
> + int fd, ret;
> + void *buf;
> + enum filetype type = filetype_unknown;
> +
> + fd = open(filename, O_RDONLY);
> + if (fd < 0)
> + return fd;
> +
> + buf = xmalloc(512);
> +
> + ret = read(fd, buf, 512);
> + if (ret != 512)
> + goto err_out;
> +
> + type = file_detect_type(buf);
> +
> +err_out:
> + close(fd);
> + free(buf);
> +
> + return type;
> +}
> diff --git a/include/filetype.h b/include/filetype.h
> new file mode 100644
> index 0000000..64d32ef
> --- /dev/null
> +++ b/include/filetype.h
> @@ -0,0 +1,23 @@
> +#ifndef __FILE_TYPE_H
> +#define __FILE_TYPE_H
> +
> +/*
> + * List of file types we know
> + */
> +enum filetype {
> + filetype_unknown,
> + filetype_arm_zimage,
> + filetype_lzo_compressed,
> + filetype_arm_barebox,
> + filetype_uimage,
> + filetype_ubi,
> + filetype_jffs2,
> + filetype_gzip,
> + filetype_bzip2,
> +};
> +
> +const char *file_type_to_string(enum filetype f);
> +enum filetype file_detect_type(void *_buf);
> +enum filetype file_name_detect_type(const char *filename);
> +
> +#endif /* __FILE_TYPE_H */
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]
[-- Attachment #2: Type: text/plain, Size: 149 bytes --]
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH 10/16] add file detection support
2011-11-28 23:10 ` Marc Kleine-Budde
@ 2011-11-29 19:41 ` Sascha Hauer
0 siblings, 0 replies; 21+ messages in thread
From: Sascha Hauer @ 2011-11-29 19:41 UTC (permalink / raw)
To: Marc Kleine-Budde; +Cc: barebox
On Tue, Nov 29, 2011 at 12:10:01AM +0100, Marc Kleine-Budde wrote:
> > +
> > +const char *file_type_to_string(enum filetype f)
> > +{
>
> you can use an const array char pointers here:
>
> static const char *filetype_str[] = {
> [filetype_unknown] = "unknown",
> ...
> }
I thought this myself when seeing the result. I was too lazy...
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 10/16] add file detection support
2011-11-28 22:10 ` [PATCH 10/16] add file detection support Sascha Hauer
2011-11-28 23:10 ` Marc Kleine-Budde
@ 2011-11-29 19:40 ` Sascha Hauer
1 sibling, 0 replies; 21+ messages in thread
From: Sascha Hauer @ 2011-11-29 19:40 UTC (permalink / raw)
To: barebox
add file detection support
Several filetypes can be autodetected. Barebox could make use
of this in several ways:
- Add a command to detect filetypes
- detect arm zImages and uImages to unify the different boot commands
- maybe detect UBI or JFFS2 images to construct parts of the kernel
command line
- select correct uncompression function based on filetype
This patch adds basic support to detect filetypes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
common/Makefile | 1 +
common/filetype.c | 99 ++++++++++++++++++++++++++++++++++++++++++++++++++++
include/filetype.h | 23 ++++++++++++
3 files changed, 123 insertions(+), 0 deletions(-)
create mode 100644 common/filetype.c
create mode 100644 include/filetype.h
diff --git a/common/Makefile b/common/Makefile
index 3edf38f..55d9dbc 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_CMD_BOOTM) += image.o
obj-y += startup.o
obj-y += misc.o
obj-y += memsize.o
+obj-y += filetype.o
obj-$(CONFIG_MENU) += menu.o
obj-$(CONFIG_PASSWORD) += password.o
obj-$(CONFIG_MODULES) += module.o
diff --git a/common/filetype.c b/common/filetype.c
new file mode 100644
index 0000000..5635d40
--- /dev/null
+++ b/common/filetype.c
@@ -0,0 +1,99 @@
+/*
+ * filetype.c - detect filetypes
+ *
+ * Copyright (c) 2011 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation.
+ */
+#include <common.h>
+#include <filetype.h>
+#include <asm/byteorder.h>
+#include <fcntl.h>
+#include <fs.h>
+#include <malloc.h>
+
+static const char *filetype_str[] = {
+ [filetype_unknown] = "unknown",
+ [filetype_arm_zimage] = "arm Linux zImage",
+ [filetype_lzo_compressed] = "lzo compressed",
+ [filetype_arm_barebox] = "arm barebox image",
+ [filetype_uimage] = "U-Boot uImage",
+ [filetype_ubi] = "UBI image",
+ [filetype_jffs2] = "JFFS2 image",
+ [filetype_gzip] = "gzip compressed",
+ [filetype_bzip2] = "bzip2 compressed",
+};
+
+const char *file_type_to_string(enum filetype f)
+{
+ if (f < ARRAY_SIZE(filetype_str))
+ return filetype_str[f];
+
+ return NULL;
+}
+
+enum filetype file_detect_type(void *_buf)
+{
+ u32 *buf = _buf;
+ u8 *buf8 = _buf;
+
+ if (buf[8] == 0x65726162 && buf[9] == 0x00786f62)
+ return filetype_arm_barebox;
+ if (buf[9] == 0x016f2818 || buf[9] == 0x18286f01)
+ return filetype_arm_zimage;
+ if (buf8[0] == 0x89 && buf8[1] == 0x4c && buf8[2] == 0x5a &&
+ buf8[3] == 0x4f)
+ return filetype_lzo_compressed;
+ if (buf[0] == be32_to_cpu(0x27051956))
+ return filetype_uimage;
+ if (buf[0] == 0x23494255)
+ return filetype_ubi;
+ if (buf[0] == 0x20031985)
+ return filetype_jffs2;
+ if (buf8[0] == 0x1f && buf8[1] == 0x8b && buf8[2] == 0x08)
+ return filetype_gzip;
+ if (buf8[0] == 'B' && buf8[1] == 'Z' && buf8[2] == 'h' &&
+ buf8[3] > '0' && buf8[3] <= '9')
+ return filetype_bzip2;
+
+ return filetype_unknown;
+}
+
+enum filetype file_name_detect_type(const char *filename)
+{
+ int fd, ret;
+ void *buf;
+ enum filetype type = filetype_unknown;
+
+ fd = open(filename, O_RDONLY);
+ if (fd < 0)
+ return fd;
+
+ buf = xmalloc(512);
+
+ ret = read(fd, buf, 512);
+ if (ret != 512)
+ goto err_out;
+
+ type = file_detect_type(buf);
+
+err_out:
+ close(fd);
+ free(buf);
+
+ return type;
+}
diff --git a/include/filetype.h b/include/filetype.h
new file mode 100644
index 0000000..64d32ef
--- /dev/null
+++ b/include/filetype.h
@@ -0,0 +1,23 @@
+#ifndef __FILE_TYPE_H
+#define __FILE_TYPE_H
+
+/*
+ * List of file types we know
+ */
+enum filetype {
+ filetype_unknown,
+ filetype_arm_zimage,
+ filetype_lzo_compressed,
+ filetype_arm_barebox,
+ filetype_uimage,
+ filetype_ubi,
+ filetype_jffs2,
+ filetype_gzip,
+ filetype_bzip2,
+};
+
+const char *file_type_to_string(enum filetype f);
+enum filetype file_detect_type(void *_buf);
+enum filetype file_name_detect_type(const char *filename);
+
+#endif /* __FILE_TYPE_H */
--
1.7.7.1
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 11/16] lzo: export decompress_unlzo function
2011-11-28 22:09 uncompress work Sascha Hauer
` (9 preceding siblings ...)
2011-11-28 22:10 ` [PATCH 10/16] add file detection support Sascha Hauer
@ 2011-11-28 22:10 ` Sascha Hauer
2011-11-28 22:10 ` [PATCH 12/16] Add generic uncompress function Sascha Hauer
` (4 subsequent siblings)
15 siblings, 0 replies; 21+ messages in thread
From: Sascha Hauer @ 2011-11-28 22:10 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
include/lzo.h | 6 ++++++
lib/decompress_unlzo.c | 4 ++--
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/include/lzo.h b/include/lzo.h
index 5694985..b4a514f 100644
--- a/include/lzo.h
+++ b/include/lzo.h
@@ -43,4 +43,10 @@ int lzo1x_decompress_safe(const unsigned char *src, size_t src_len,
int unlzo(int in_fd, int out_fd, int *dest_len);
+int decompress_unlzo(u8 *input, int in_len,
+ int (*fill) (void *, unsigned int),
+ int (*flush) (void *, unsigned int),
+ u8 *output, int *posp,
+ void (*error) (char *x));
+
#endif
diff --git a/lib/decompress_unlzo.c b/lib/decompress_unlzo.c
index 0ae3d4d..5c0587e 100644
--- a/lib/decompress_unlzo.c
+++ b/lib/decompress_unlzo.c
@@ -106,7 +106,7 @@ static inline int parse_header(u8 *input, int *skip, int in_len)
return 1;
}
-static inline int __unlzo(u8 *input, int in_len,
+int decompress_unlzo(u8 *input, int in_len,
int (*fill) (void *, unsigned int),
int (*flush) (void *, unsigned int),
u8 *output, int *posp,
@@ -307,5 +307,5 @@ int unlzo(int _in_fd, int _out_fd, int *dest_len)
{
in_fd = _in_fd;
out_fd = _out_fd;
- return __unlzo(NULL, 0, unlzo_fill, unlzo_flush, NULL, NULL, unlzo_error);
+ return decompress_unlzo(NULL, 0, unlzo_fill, unlzo_flush, NULL, NULL, unlzo_error);
}
--
1.7.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH 12/16] Add generic uncompress function
2011-11-28 22:09 uncompress work Sascha Hauer
` (10 preceding siblings ...)
2011-11-28 22:10 ` [PATCH 11/16] lzo: export decompress_unlzo function Sascha Hauer
@ 2011-11-28 22:10 ` Sascha Hauer
2011-11-28 22:10 ` [PATCH 13/16] add generic uncompress command Sascha Hauer
` (3 subsequent siblings)
15 siblings, 0 replies; 21+ messages in thread
From: Sascha Hauer @ 2011-11-28 22:10 UTC (permalink / raw)
To: barebox
uncompress() has the same prototype as the various kernel decompress
functions. It automatically detects the compression type and selects
the correct uncompress function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
include/uncompress.h | 19 ++++++
lib/Makefile | 1 +
lib/uncompress.c | 159 ++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 179 insertions(+), 0 deletions(-)
create mode 100644 include/uncompress.h
create mode 100644 lib/uncompress.c
diff --git a/include/uncompress.h b/include/uncompress.h
new file mode 100644
index 0000000..d146c90
--- /dev/null
+++ b/include/uncompress.h
@@ -0,0 +1,19 @@
+#ifndef __UNCOMPRESS_H
+#define __UNCOMPRESS_H
+
+int uncompress(unsigned char *inbuf, int len,
+ int(*fill)(void*, unsigned int),
+ int(*flush)(void*, unsigned int),
+ unsigned char *output,
+ int *pos,
+ void(*error_fn)(char *x));
+
+int uncompress_fd_to_fd(int infd, int outfd,
+ void(*error_fn)(char *x));
+
+int uncompress_fd_to_buf(int infd, void *output,
+ void(*error_fn)(char *x));
+
+void uncompress_err_stdout(char *);
+
+#endif /* __UNCOMPRESS_H */
diff --git a/lib/Makefile b/lib/Makefile
index f0abc21..e35d4b1 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -33,3 +33,4 @@ obj-$(CONFIG_MD5) += md5.o
obj-$(CONFIG_SHA1) += sha1.o
obj-$(CONFIG_SHA256) += sha256.o
obj-$(CONFIG_FDT) += fdt/
+obj-y += uncompress.o
diff --git a/lib/uncompress.c b/lib/uncompress.c
new file mode 100644
index 0000000..80982f3
--- /dev/null
+++ b/lib/uncompress.c
@@ -0,0 +1,159 @@
+/*
+ * uncompress.c - uncompress files
+ *
+ * Copyright (c) 2011 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <common.h>
+#include <uncompress.h>
+#include <bunzip2.h>
+#include <gunzip.h>
+#include <lzo.h>
+#include <errno.h>
+#include <filetype.h>
+#include <malloc.h>
+#include <fs.h>
+
+static void *uncompress_buf;
+static unsigned int uncompress_size;
+
+void uncompress_err_stdout(char *x)
+{
+ printf("%s\n", x);
+}
+
+static int (*uncompress_fill_fn)(void*, unsigned int);
+
+static int uncompress_fill(void *buf, unsigned int len)
+{
+ int total = 0;
+
+ if (uncompress_size) {
+ int now = min(len, uncompress_size);
+
+ memcpy(buf, uncompress_buf, now);
+ uncompress_size -= now;
+ len -= now;
+ total = now;
+ buf += now;
+ }
+
+ if (len) {
+ int ret = uncompress_fill_fn(buf, len);
+ if (ret < 0)
+ return ret;
+ total += ret;
+ }
+
+ return total;
+}
+
+int uncompress(unsigned char *inbuf, int len,
+ int(*fill)(void*, unsigned int),
+ int(*flush)(void*, unsigned int),
+ unsigned char *output,
+ int *pos,
+ void(*error_fn)(char *x))
+{
+ enum filetype ft;
+ int (*compfn)(unsigned char *inbuf, int len,
+ int(*fill)(void*, unsigned int),
+ int(*flush)(void*, unsigned int),
+ unsigned char *output,
+ int *pos,
+ void(*error)(char *x));
+ int ret;
+ char *err;
+
+ BUG_ON(uncompress_size);
+
+ if (inbuf) {
+ ft = file_detect_type(inbuf);
+ } else {
+ if (!fill)
+ return -EINVAL;
+
+ uncompress_fill_fn = fill;
+ uncompress_buf = xzalloc(32);
+ uncompress_size = 32;
+
+ ret = fill(uncompress_buf, 32);
+ if (ret < 0)
+ goto err;
+
+ ft = file_detect_type(uncompress_buf);
+ }
+
+ switch (ft) {
+#ifdef CONFIG_BZLIB
+ case filetype_bzip2:
+ compfn = bunzip2;
+ break;
+#endif
+#ifdef CONFIG_ZLIB
+ case filetype_gzip:
+ compfn = gunzip;
+ break;
+#endif
+#ifdef CONFIG_LZO_DECOMPRESS
+ case filetype_lzo_compressed:
+ compfn = decompress_unlzo;
+ break;
+#endif
+ default:
+ err = asprintf("cannot handle filetype %s", file_type_to_string(ft));
+ error_fn(err);
+ free(err);
+ ret = -ENOSYS;
+ goto err;
+ }
+
+ ret = compfn(inbuf, len, fill ? uncompress_fill : NULL,
+ flush, output, pos, error_fn);
+err:
+ free(uncompress_buf);
+ uncompress_size = 0;
+
+ return ret;
+}
+
+static int uncompress_infd, uncompress_outfd;
+
+static int fill_fd(void *buf, unsigned int len)
+{
+ return read(uncompress_infd, buf, len);
+}
+
+static int flush_fd(void *buf, unsigned int len)
+{
+ return write(uncompress_outfd, buf, len);
+}
+
+int uncompress_fd_to_fd(int infd, int outfd,
+ void(*error_fn)(char *x))
+{
+ uncompress_infd = infd;
+ uncompress_outfd = outfd;
+
+ return uncompress(NULL, 0,
+ fill_fd,
+ flush_fd,
+ NULL,
+ NULL,
+ error_fn);
+}
--
1.7.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH 13/16] add generic uncompress command
2011-11-28 22:09 uncompress work Sascha Hauer
` (11 preceding siblings ...)
2011-11-28 22:10 ` [PATCH 12/16] Add generic uncompress function Sascha Hauer
@ 2011-11-28 22:10 ` Sascha Hauer
2011-11-28 22:10 ` [PATCH 14/16] update configs and default envs for uncompress Sascha Hauer
` (2 subsequent siblings)
15 siblings, 0 replies; 21+ messages in thread
From: Sascha Hauer @ 2011-11-28 22:10 UTC (permalink / raw)
To: barebox
Using the new uncompress function we can now implement a command which
can uncompress all known compression types. This supplements the unlzo
command.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
commands/Kconfig | 10 +++++-----
commands/Makefile | 2 +-
commands/{unlzo.c => uncompress.c} | 23 ++++++++++++-----------
3 files changed, 18 insertions(+), 17 deletions(-)
rename commands/{unlzo.c => uncompress.c} (73%)
diff --git a/commands/Kconfig b/commands/Kconfig
index e5c0fb5..890be78 100644
--- a/commands/Kconfig
+++ b/commands/Kconfig
@@ -402,13 +402,13 @@ config CMD_GPIO
include gpio_set_value, gpio_get_value, gpio_direction_input and
gpio_direction_output commands to control gpios.
-config CMD_UNLZO
+config CMD_UNCOMPRESS
bool
- select LZO_DECOMPRESS
- prompt "unlzo"
+ prompt "uncompress"
help
- Say yes here to get the unlzo command. lzo is a fast compression
- algorithm by Markus Franz Xaver Johannes Oberhumer.
+ Say yes here to get the uncompress command. uncompress handles
+ lzo, gzip and bzip2 compressed files depending on the compiled
+ in compression libraries
config CMD_I2C
bool
diff --git a/commands/Makefile b/commands/Makefile
index 5c51916..0aae666 100644
--- a/commands/Makefile
+++ b/commands/Makefile
@@ -47,7 +47,7 @@ obj-$(CONFIG_CMD_INSMOD) += insmod.o
obj-$(CONFIG_CMD_BMP) += bmp.o
obj-$(CONFIG_USB_GADGET_DFU) += dfu.o
obj-$(CONFIG_CMD_GPIO) += gpio.o
-obj-$(CONFIG_CMD_UNLZO) += unlzo.o
+obj-$(CONFIG_CMD_UNCOMPRESS) += uncompress.o
obj-$(CONFIG_CMD_I2C) += i2c.o
obj-$(CONFIG_CMD_UBI) += ubi.o
obj-$(CONFIG_CMD_MENU) += menu.o
diff --git a/commands/unlzo.c b/commands/uncompress.c
similarity index 73%
rename from commands/unlzo.c
rename to commands/uncompress.c
index 0b6dd4b..fff6227 100644
--- a/commands/unlzo.c
+++ b/commands/uncompress.c
@@ -1,5 +1,5 @@
/*
- * unlzo.c - uncompress a lzo compressed file
+ * uncompress.c - uncompress a lzo compressed file
*
* Copyright (c) 2010 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
@@ -25,11 +25,11 @@
#include <errno.h>
#include <fcntl.h>
#include <fs.h>
-#include <lzo.h>
+#include <uncompress.h>
-static int do_unlzo(struct command *cmdtp, int argc, char *argv[])
+static int do_uncompress(struct command *cmdtp, int argc, char *argv[])
{
- int from, to, ret, retlen;
+ int from, to, ret;
if (argc != 3)
return COMMAND_ERROR_USAGE;
@@ -47,7 +47,8 @@ static int do_unlzo(struct command *cmdtp, int argc, char *argv[])
goto exit_close;
}
- ret = unlzo(from, to, &retlen);
+ ret = uncompress_fd_to_fd(from, to, uncompress_err_stdout);
+
if (ret)
printf("failed to decompress\n");
@@ -57,13 +58,13 @@ exit_close:
return ret;
}
-static const __maybe_unused char cmd_unlzo_help[] =
-"Usage: unlzo <infile> <outfile>\n"
-"Uncompress a lzo compressed file\n";
+static const __maybe_unused char cmd_uncompress_help[] =
+"Usage: uncompress <infile> <outfile>\n"
+"Uncompress a compressed file\n";
-BAREBOX_CMD_START(unlzo)
- .cmd = do_unlzo,
+BAREBOX_CMD_START(uncompress)
+ .cmd = do_uncompress,
.usage = "lzop <infile> <outfile>",
- BAREBOX_CMD_HELP(cmd_unlzo_help)
+ BAREBOX_CMD_HELP(cmd_uncompress_help)
BAREBOX_CMD_END
--
1.7.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH 14/16] update configs and default envs for uncompress
2011-11-28 22:09 uncompress work Sascha Hauer
` (12 preceding siblings ...)
2011-11-28 22:10 ` [PATCH 13/16] add generic uncompress command Sascha Hauer
@ 2011-11-28 22:10 ` Sascha Hauer
2011-11-28 22:10 ` [PATCH 15/16] remove now unused unlzo function Sascha Hauer
2011-11-28 22:10 ` [PATCH 16/16] bootm: use generic uncompress function Sascha Hauer
15 siblings, 0 replies; 21+ messages in thread
From: Sascha Hauer @ 2011-11-28 22:10 UTC (permalink / raw)
To: barebox
uncompress is the replacement for unlzo. Adjust environments
and defconfigs accordingly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/eukrea_cpuimx25/env/bin/init_board | 2 +-
arch/arm/boards/eukrea_cpuimx27/env/bin/init | 2 +-
arch/arm/boards/eukrea_cpuimx35/env/bin/init_board | 2 +-
arch/arm/boards/eukrea_cpuimx51/env/bin/init_board | 2 +-
arch/arm/configs/at91rm9200ek_defconfig | 2 +-
arch/arm/configs/at91sam9261ek_defconfig | 2 +-
arch/arm/configs/at91sam9g10ek_defconfig | 2 +-
arch/arm/configs/at91sam9m10g45ek_defconfig | 2 +-
arch/arm/configs/cupid_defconfig | 2 +-
arch/arm/configs/eukrea_cpuimx25_defconfig | 2 +-
arch/arm/configs/eukrea_cpuimx27_defconfig | 2 +-
arch/arm/configs/eukrea_cpuimx35_defconfig | 2 +-
arch/arm/configs/eukrea_cpuimx51_defconfig | 2 +-
arch/arm/configs/freescale_mx35_3stack_defconfig | 2 +-
arch/arm/configs/freescale_mx53_loco_defconfig | 2 +-
arch/arm/configs/neso_defconfig | 2 +-
arch/arm/configs/nhk8815_defconfig | 2 +-
arch/arm/configs/omap3530_beagle_defconfig | 2 +-
arch/arm/configs/panda_defconfig | 2 +-
arch/arm/configs/pca100_defconfig | 2 +-
arch/arm/configs/pcm037_defconfig | 2 +-
arch/arm/configs/pcm043_defconfig | 2 +-
arch/arm/configs/pcm049_defconfig | 2 +-
arch/arm/configs/pm9261_defconfig | 2 +-
arch/arm/configs/pm9g45_defconfig | 2 +-
arch/arm/configs/scb9328_defconfig | 2 +-
arch/arm/configs/versatilepb_defconfig | 2 +-
arch/mips/configs/dlink-dir-320_defconfig | 2 +-
arch/mips/configs/qemu-malta_defconfig | 2 +-
defaultenv/bin/boot | 2 +-
30 files changed, 30 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boards/eukrea_cpuimx25/env/bin/init_board b/arch/arm/boards/eukrea_cpuimx25/env/bin/init_board
index 72b4ab3..2199b88 100644
--- a/arch/arm/boards/eukrea_cpuimx25/env/bin/init_board
+++ b/arch/arm/boards/eukrea_cpuimx25/env/bin/init_board
@@ -4,7 +4,7 @@ if [ -f /env/logo.bmp ]; then
bmp /env/logo.bmp
fb0.enable=1
elif [ -f /env/logo.bmp.lzo ]; then
- unlzo /env/logo.bmp.lzo /logo.bmp
+ uncompress /env/logo.bmp.lzo /logo.bmp
bmp /logo.bmp
fb0.enable=1
fi
diff --git a/arch/arm/boards/eukrea_cpuimx27/env/bin/init b/arch/arm/boards/eukrea_cpuimx27/env/bin/init
index aefd67c..f84ace9 100644
--- a/arch/arm/boards/eukrea_cpuimx27/env/bin/init
+++ b/arch/arm/boards/eukrea_cpuimx27/env/bin/init
@@ -20,7 +20,7 @@ if [ -f /env/logo.bmp ]; then
bmp /env/logo.bmp
fb0.enable=1
elif [ -f /env/logo.bmp.lzo ]; then
- unlzo /env/logo.bmp.lzo /logo.bmp
+ uncompress /env/logo.bmp.lzo /logo.bmp
bmp /logo.bmp
fb0.enable=1
fi
diff --git a/arch/arm/boards/eukrea_cpuimx35/env/bin/init_board b/arch/arm/boards/eukrea_cpuimx35/env/bin/init_board
index 173ecf9..cb624e5 100644
--- a/arch/arm/boards/eukrea_cpuimx35/env/bin/init_board
+++ b/arch/arm/boards/eukrea_cpuimx35/env/bin/init_board
@@ -5,7 +5,7 @@ if [ -f /env/logo.bmp ]; then
fb0.enable=1
gpio_set_value 1 1
elif [ -f /env/logo.bmp.lzo ]; then
- unlzo /env/logo.bmp.lzo /logo.bmp
+ uncompress /env/logo.bmp.lzo /logo.bmp
bmp /logo.bmp
fb0.enable=1
gpio_set_value 1 1
diff --git a/arch/arm/boards/eukrea_cpuimx51/env/bin/init_board b/arch/arm/boards/eukrea_cpuimx51/env/bin/init_board
index 173ecf9..cb624e5 100644
--- a/arch/arm/boards/eukrea_cpuimx51/env/bin/init_board
+++ b/arch/arm/boards/eukrea_cpuimx51/env/bin/init_board
@@ -5,7 +5,7 @@ if [ -f /env/logo.bmp ]; then
fb0.enable=1
gpio_set_value 1 1
elif [ -f /env/logo.bmp.lzo ]; then
- unlzo /env/logo.bmp.lzo /logo.bmp
+ uncompress /env/logo.bmp.lzo /logo.bmp
bmp /logo.bmp
fb0.enable=1
gpio_set_value 1 1
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index 0c10f88..584bfdf 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -33,7 +33,7 @@ CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
# CONFIG_SPI is not set
CONFIG_DRIVER_CFI=y
# CONFIG_DRIVER_CFI_INTEL is not set
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index c753eb3..a4adee9 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -33,7 +33,7 @@ CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_NFS=y
diff --git a/arch/arm/configs/at91sam9g10ek_defconfig b/arch/arm/configs/at91sam9g10ek_defconfig
index d39639a..9271b68 100644
--- a/arch/arm/configs/at91sam9g10ek_defconfig
+++ b/arch/arm/configs/at91sam9g10ek_defconfig
@@ -27,7 +27,7 @@ CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_NFS=y
diff --git a/arch/arm/configs/at91sam9m10g45ek_defconfig b/arch/arm/configs/at91sam9m10g45ek_defconfig
index 9699f5b..548fe6c 100644
--- a/arch/arm/configs/at91sam9m10g45ek_defconfig
+++ b/arch/arm/configs/at91sam9m10g45ek_defconfig
@@ -37,7 +37,7 @@ CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_NFS=y
diff --git a/arch/arm/configs/cupid_defconfig b/arch/arm/configs/cupid_defconfig
index b842469..3f5038f 100644
--- a/arch/arm/configs/cupid_defconfig
+++ b/arch/arm/configs/cupid_defconfig
@@ -35,7 +35,7 @@ CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_BMP=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_NFS=y
diff --git a/arch/arm/configs/eukrea_cpuimx25_defconfig b/arch/arm/configs/eukrea_cpuimx25_defconfig
index 7fa2042..2a697be 100644
--- a/arch/arm/configs/eukrea_cpuimx25_defconfig
+++ b/arch/arm/configs/eukrea_cpuimx25_defconfig
@@ -35,7 +35,7 @@ CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_BMP=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_CMD_I2C=y
CONFIG_CMD_LED=y
CONFIG_CMD_LED_TRIGGER=y
diff --git a/arch/arm/configs/eukrea_cpuimx27_defconfig b/arch/arm/configs/eukrea_cpuimx27_defconfig
index 75b849b..93de428 100644
--- a/arch/arm/configs/eukrea_cpuimx27_defconfig
+++ b/arch/arm/configs/eukrea_cpuimx27_defconfig
@@ -33,7 +33,7 @@ CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_BMP=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_CMD_I2C=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
diff --git a/arch/arm/configs/eukrea_cpuimx35_defconfig b/arch/arm/configs/eukrea_cpuimx35_defconfig
index 6964332..7bbe0d5 100644
--- a/arch/arm/configs/eukrea_cpuimx35_defconfig
+++ b/arch/arm/configs/eukrea_cpuimx35_defconfig
@@ -34,7 +34,7 @@ CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_BMP=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_CMD_I2C=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
diff --git a/arch/arm/configs/eukrea_cpuimx51_defconfig b/arch/arm/configs/eukrea_cpuimx51_defconfig
index a9fca84..39fe962 100644
--- a/arch/arm/configs/eukrea_cpuimx51_defconfig
+++ b/arch/arm/configs/eukrea_cpuimx51_defconfig
@@ -32,7 +32,7 @@ CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_PING=y
diff --git a/arch/arm/configs/freescale_mx35_3stack_defconfig b/arch/arm/configs/freescale_mx35_3stack_defconfig
index 2c0e513..c8d159f 100644
--- a/arch/arm/configs/freescale_mx35_3stack_defconfig
+++ b/arch/arm/configs/freescale_mx35_3stack_defconfig
@@ -29,7 +29,7 @@ CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_BMP=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_CMD_I2C=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
diff --git a/arch/arm/configs/freescale_mx53_loco_defconfig b/arch/arm/configs/freescale_mx53_loco_defconfig
index 8e4a7ce..cb07f85 100644
--- a/arch/arm/configs/freescale_mx53_loco_defconfig
+++ b/arch/arm/configs/freescale_mx53_loco_defconfig
@@ -33,7 +33,7 @@ CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_NFS=y
diff --git a/arch/arm/configs/neso_defconfig b/arch/arm/configs/neso_defconfig
index 1b533df..dcc2f70 100644
--- a/arch/arm/configs/neso_defconfig
+++ b/arch/arm/configs/neso_defconfig
@@ -34,7 +34,7 @@ CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_BMP=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_NFS=y
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index b81afe2..597e9dd 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -34,7 +34,7 @@ CONFIG_CMD_RESET=y
CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_NFS=y
diff --git a/arch/arm/configs/omap3530_beagle_defconfig b/arch/arm/configs/omap3530_beagle_defconfig
index 8a12154..e0688ae 100644
--- a/arch/arm/configs/omap3530_beagle_defconfig
+++ b/arch/arm/configs/omap3530_beagle_defconfig
@@ -31,7 +31,7 @@ CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_CMD_I2C=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
diff --git a/arch/arm/configs/panda_defconfig b/arch/arm/configs/panda_defconfig
index 3ea2466..27592e5 100644
--- a/arch/arm/configs/panda_defconfig
+++ b/arch/arm/configs/panda_defconfig
@@ -34,7 +34,7 @@ CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_NFS=y
diff --git a/arch/arm/configs/pca100_defconfig b/arch/arm/configs/pca100_defconfig
index 88e7b9f..29e02c5 100644
--- a/arch/arm/configs/pca100_defconfig
+++ b/arch/arm/configs/pca100_defconfig
@@ -33,7 +33,7 @@ CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_PING=y
diff --git a/arch/arm/configs/pcm037_defconfig b/arch/arm/configs/pcm037_defconfig
index d9525a2..ec43317 100644
--- a/arch/arm/configs/pcm037_defconfig
+++ b/arch/arm/configs/pcm037_defconfig
@@ -31,7 +31,7 @@ CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_NFS=y
diff --git a/arch/arm/configs/pcm043_defconfig b/arch/arm/configs/pcm043_defconfig
index 3bf21c8..3c64805 100644
--- a/arch/arm/configs/pcm043_defconfig
+++ b/arch/arm/configs/pcm043_defconfig
@@ -35,7 +35,7 @@ CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_NFS=y
diff --git a/arch/arm/configs/pcm049_defconfig b/arch/arm/configs/pcm049_defconfig
index ed20f1b..9b4c341 100644
--- a/arch/arm/configs/pcm049_defconfig
+++ b/arch/arm/configs/pcm049_defconfig
@@ -35,7 +35,7 @@ CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_NFS=y
diff --git a/arch/arm/configs/pm9261_defconfig b/arch/arm/configs/pm9261_defconfig
index 0bd9483..89aa033 100644
--- a/arch/arm/configs/pm9261_defconfig
+++ b/arch/arm/configs/pm9261_defconfig
@@ -34,7 +34,7 @@ CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_NFS=y
diff --git a/arch/arm/configs/pm9g45_defconfig b/arch/arm/configs/pm9g45_defconfig
index 20bfd71..bf9af22 100644
--- a/arch/arm/configs/pm9g45_defconfig
+++ b/arch/arm/configs/pm9g45_defconfig
@@ -37,7 +37,7 @@ CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_NFS=y
diff --git a/arch/arm/configs/scb9328_defconfig b/arch/arm/configs/scb9328_defconfig
index 73ef238..4955646 100644
--- a/arch/arm/configs/scb9328_defconfig
+++ b/arch/arm/configs/scb9328_defconfig
@@ -28,7 +28,7 @@ CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_CMD_LED=y
CONFIG_CMD_LED_TRIGGER=y
CONFIG_NET=y
diff --git a/arch/arm/configs/versatilepb_defconfig b/arch/arm/configs/versatilepb_defconfig
index 6ffdf28..1b51d91 100644
--- a/arch/arm/configs/versatilepb_defconfig
+++ b/arch/arm/configs/versatilepb_defconfig
@@ -32,7 +32,7 @@ CONFIG_CMD_RESET=y
CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_NFS=y
diff --git a/arch/mips/configs/dlink-dir-320_defconfig b/arch/mips/configs/dlink-dir-320_defconfig
index dbce0b9..88c0e83 100644
--- a/arch/mips/configs/dlink-dir-320_defconfig
+++ b/arch/mips/configs/dlink-dir-320_defconfig
@@ -41,7 +41,7 @@ CONFIG_CMD_RESET=y
CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_NFS=y
diff --git a/arch/mips/configs/qemu-malta_defconfig b/arch/mips/configs/qemu-malta_defconfig
index b6f53ca..eac21e7 100644
--- a/arch/mips/configs/qemu-malta_defconfig
+++ b/arch/mips/configs/qemu-malta_defconfig
@@ -40,7 +40,7 @@ CONFIG_CMD_RESET=y
CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
-CONFIG_CMD_UNLZO=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_NFS=y
diff --git a/defaultenv/bin/boot b/defaultenv/bin/boot
index 6761d84..90ebf9a 100644
--- a/defaultenv/bin/boot
+++ b/defaultenv/bin/boot
@@ -124,6 +124,6 @@ elif [ x$kernelimage_type = xraw ]; then
fi
bootu /dev/ram0.kernelraw
elif [ x$kernelimage_type = xraw_lzo ]; then
- unlzo $kdev /dev/ram0.kernelraw
+ uncompress $kdev /dev/ram0.kernelraw
bootu /dev/ram0.kernelraw
fi
--
1.7.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH 15/16] remove now unused unlzo function
2011-11-28 22:09 uncompress work Sascha Hauer
` (13 preceding siblings ...)
2011-11-28 22:10 ` [PATCH 14/16] update configs and default envs for uncompress Sascha Hauer
@ 2011-11-28 22:10 ` Sascha Hauer
2011-11-28 22:10 ` [PATCH 16/16] bootm: use generic uncompress function Sascha Hauer
15 siblings, 0 replies; 21+ messages in thread
From: Sascha Hauer @ 2011-11-28 22:10 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
include/lzo.h | 2 --
lib/decompress_unlzo.c | 25 -------------------------
2 files changed, 0 insertions(+), 27 deletions(-)
diff --git a/include/lzo.h b/include/lzo.h
index b4a514f..0530a68 100644
--- a/include/lzo.h
+++ b/include/lzo.h
@@ -41,8 +41,6 @@ int lzo1x_decompress_safe(const unsigned char *src, size_t src_len,
#define LZO_E_INPUT_NOT_CONSUMED (-8)
#define LZO_E_NOT_YET_IMPLEMENTED (-9)
-int unlzo(int in_fd, int out_fd, int *dest_len);
-
int decompress_unlzo(u8 *input, int in_len,
int (*fill) (void *, unsigned int),
int (*flush) (void *, unsigned int),
diff --git a/lib/decompress_unlzo.c b/lib/decompress_unlzo.c
index 5c0587e..000bd70 100644
--- a/lib/decompress_unlzo.c
+++ b/lib/decompress_unlzo.c
@@ -284,28 +284,3 @@ exit_1:
exit:
return ret;
}
-
-static int in_fd;
-static int out_fd;
-
-static int unlzo_fill(void *buf, unsigned int len)
-{
- return read(in_fd, buf, len);
-}
-
-static int unlzo_flush(void *buf, unsigned int len)
-{
- return write(out_fd, buf, len);
-}
-
-static void unlzo_error(char *s)
-{
- printf("%s\n", s);
-}
-
-int unlzo(int _in_fd, int _out_fd, int *dest_len)
-{
- in_fd = _in_fd;
- out_fd = _out_fd;
- return decompress_unlzo(NULL, 0, unlzo_fill, unlzo_flush, NULL, NULL, unlzo_error);
-}
--
1.7.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH 16/16] bootm: use generic uncompress function
2011-11-28 22:09 uncompress work Sascha Hauer
` (14 preceding siblings ...)
2011-11-28 22:10 ` [PATCH 15/16] remove now unused unlzo function Sascha Hauer
@ 2011-11-28 22:10 ` Sascha Hauer
15 siblings, 0 replies; 21+ messages in thread
From: Sascha Hauer @ 2011-11-28 22:10 UTC (permalink / raw)
To: barebox
This simplifies the code somewhat. The user visible change here is
that we now ignore the compression specified in the uImage. Instead
we detect the compression type from the data which also means that
we now support lzo compressed uImages.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
commands/bootm.c | 31 ++++---------------------------
1 files changed, 4 insertions(+), 27 deletions(-)
diff --git a/commands/bootm.c b/commands/bootm.c
index 878b7aa..b313cfc 100644
--- a/commands/bootm.c
+++ b/commands/bootm.c
@@ -30,7 +30,6 @@
#include <command.h>
#include <image.h>
#include <malloc.h>
-#include <gunzip.h>
#include <environment.h>
#include <asm/byteorder.h>
#include <xfuncs.h>
@@ -41,7 +40,7 @@
#include <boot.h>
#include <rtc.h>
#include <init.h>
-#include <bunzip2.h>
+#include <uncompress.h>
#include <asm-generic/memory_layout.h>
/*
@@ -103,11 +102,6 @@ struct image_handle_data* image_handle_data_get_by_num(struct image_handle* hand
return &handle->data_entries[num];
}
-static void unzip_error(char *x)
-{
- puts(x);
-}
-
int relocate_image(struct image_handle *handle, void *load_address)
{
image_header_t *hdr = &handle->header;
@@ -131,30 +125,13 @@ int relocate_image(struct image_handle *handle, void *load_address)
memmove ((void *) image_get_load(hdr), (uchar *)data, len);
}
break;
-#ifdef CONFIG_ZLIB
- case IH_COMP_GZIP:
- printf (" Uncompressing ... ");
-
- ret = gunzip((void *)data, len, NULL, NULL, load_address, NULL,
- unzip_error);
- if (ret)
- return ret;
- break;
-#endif
-#ifdef CONFIG_BZLIB
- case IH_COMP_BZIP2:
+ default:
printf (" Uncompressing ... ");
-
- ret = bunzip2((void *)data, len, NULL, NULL, load_address, NULL,
- unzip_error);
+ ret = uncompress((void *)data, len, NULL, NULL, load_address, NULL,
+ uncompress_err_stdout);
if (ret)
return ret;
break;
-#endif
- default:
- printf("Unimplemented compression type %d\n",
- image_get_comp(hdr));
- return -1;
}
return 0;
--
1.7.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread