From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 03/11] remove unused Kconfig variable HAS_CFI
Date: Wed, 7 Dec 2011 13:52:59 +0100 [thread overview]
Message-ID: <1323262387-8012-4-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1323262387-8012-1-git-send-email-s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-imx/Kconfig | 8 --------
drivers/nor/Kconfig | 3 ---
2 files changed, 0 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 726920f..27bf386 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -182,7 +182,6 @@ config MACH_MX1ADS
config MACH_SCB9328
bool "Synertronixx scb9328"
select HAS_DM9000
- select HAS_CFI
select MACH_HAS_LOWLEVEL_INIT
help
Say Y here if you are using the Synertronixx scb9328 board
@@ -201,7 +200,6 @@ choice
config MACH_IMX21ADS
bool "Freescale i.MX21ADS"
- select HAS_CFI
select MACH_HAS_LOWLEVEL_INIT
select HAS_CS8900
help
@@ -229,7 +227,6 @@ config MACH_EUKREA_CPUIMX25
config MACH_FREESCALE_MX25_3STACK
bool "Freescale MX25 3stack"
- select HAS_CFI
select MACH_HAS_LOWLEVEL_INIT
select I2C
select I2C_MC34704
@@ -257,7 +254,6 @@ choice
config MACH_EUKREA_CPUIMX27
bool "EUKREA CPUIMX27"
- select HAS_CFI
select MACH_HAS_LOWLEVEL_INIT
help
Say Y here if you are using Eukrea's CPUIMX27 equipped
@@ -265,7 +261,6 @@ config MACH_EUKREA_CPUIMX27
config MACH_IMX27ADS
bool "Freescale i.MX27ADS"
- select HAS_CFI
select MACH_HAS_LOWLEVEL_INIT
help
Say Y here if you are using the Freescale i.MX27ads board equipped
@@ -280,7 +275,6 @@ config MACH_PCA100
config MACH_PCM038
bool "phyCORE-i.MX27"
- select HAS_CFI
select MACH_HAS_LOWLEVEL_INIT
select SPI
select DRIVER_SPI_IMX
@@ -339,7 +333,6 @@ config MACH_EUKREA_CPUIMX35
config MACH_FREESCALE_MX35_3STACK
bool "Freescale MX35 3stack"
- select HAS_CFI
select MACH_HAS_LOWLEVEL_INIT
select I2C
select I2C_IMX
@@ -351,7 +344,6 @@ config MACH_FREESCALE_MX35_3STACK
config MACH_PCM043
bool "phyCORE-i.MX35"
- select HAS_CFI
select MACH_HAS_LOWLEVEL_INIT
select ARCH_HAS_L2X0
help
diff --git a/drivers/nor/Kconfig b/drivers/nor/Kconfig
index 84ce0d0..8652d27 100644
--- a/drivers/nor/Kconfig
+++ b/drivers/nor/Kconfig
@@ -8,9 +8,6 @@ menuconfig DRIVER_CFI
if DRIVER_CFI
-config HAS_CFI
- bool
-
config DRIVER_CFI_INTEL
default y
depends on DRIVER_CFI
--
1.7.7.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2011-12-07 12:53 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-07 12:52 [PATCH] compile (and warning) fixes for -next Sascha Hauer
2011-12-07 12:52 ` [PATCH 01/11] mci s3c: remove unused code Sascha Hauer
2011-12-07 12:52 ` [PATCH 02/11] memory: do not try to reserve iomem on sandbox Sascha Hauer
2011-12-07 12:52 ` Sascha Hauer [this message]
2011-12-07 12:53 ` [PATCH 04/11] fix underscore count in bss_start/bss_stop Sascha Hauer
2011-12-07 12:53 ` [PATCH 05/11] console_simple: fix compiler warning Sascha Hauer
2011-12-07 12:53 ` [PATCH 06/11] net macb: remove unused variable Sascha Hauer
2011-12-07 13:19 ` Jean-Christophe PLAGNIOL-VILLARD
2011-12-07 12:53 ` [PATCH 07/11] pxa: add type to Kconfig choice Sascha Hauer
2011-12-07 12:53 ` [PATCH 08/11] ft_build: temporarily disable bootm oftree support Sascha Hauer
2011-12-07 12:53 ` [PATCH 09/11] arm eukrea boards: fix breakage after mach-types update Sascha Hauer
2011-12-07 12:53 ` [PATCH 10/11] arm at91sam9260: Add missing AT91SAM_ETX2_ETX3_ALTERNATIVE define Sascha Hauer
2011-12-08 14:20 ` Jean-Christophe PLAGNIOL-VILLARD
2011-12-09 5:33 ` Jean-Christophe PLAGNIOL-VILLARD
2011-12-09 10:15 ` Sascha Hauer
2011-12-09 10:45 ` Jean-Christophe PLAGNIOL-VILLARD
2011-12-07 12:53 ` [PATCH 11/11] x86: Fix linker script for magic vars Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1323262387-8012-4-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox