From: Juergen Beisert <jbe@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 1/2] Add support for more recent Davicom DM9k devices
Date: Mon, 12 Dec 2011 10:27:36 +0100 [thread overview]
Message-ID: <1323682057-15434-2-git-send-email-jbe@pengutronix.de> (raw)
In-Reply-To: <1323682057-15434-1-git-send-email-jbe@pengutronix.de>
This patch adds support for the more recent DM9000A and DM9000B types, and keeps
support for the older DM9000E device. As this patch is more or less a complete
re-wrote of the existing driver I add a new source file instead of fixing the
existing one. In a later patch the old driver will be removed.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
drivers/net/Kconfig | 5 +
drivers/net/Makefile | 1 +
drivers/net/dm9k.c | 784 ++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 790 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/dm9k.c
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 19e35db..6c697a9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -51,6 +51,11 @@ config DRIVER_NET_DM9000
depends on HAS_DM9000
select MIIDEV
+config DRIVER_NET_DM9K
+ bool "Davicom dm9k[E|A|B] ethernet driver"
+ depends on HAS_DM9000
+ select MIIDEV
+
config DRIVER_NET_NETX
bool "Hilscher Netx ethernet driver"
depends on HAS_NETX_ETHER
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index f02618b..d3bc7b0 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -2,6 +2,7 @@ obj-$(CONFIG_DRIVER_NET_CS8900) += cs8900.o
obj-$(CONFIG_DRIVER_NET_SMC911X) += smc911x.o
obj-$(CONFIG_DRIVER_NET_SMC91111) += smc91111.o
obj-$(CONFIG_DRIVER_NET_DM9000) += dm9000.o
+obj-$(CONFIG_DRIVER_NET_DM9K) += dm9k.o
obj-$(CONFIG_DRIVER_NET_NETX) += netx_eth.o
obj-$(CONFIG_DRIVER_NET_AT91_ETHER) += at91_ether.o
obj-$(CONFIG_DRIVER_NET_MPC5200) += fec_mpc5200.o
diff --git a/drivers/net/dm9k.c b/drivers/net/dm9k.c
new file mode 100644
index 0000000..8efaa5a
--- /dev/null
+++ b/drivers/net/dm9k.c
@@ -0,0 +1,784 @@
+/*
+ * Copyright (C) 2011 Juergen Beisert, Pengutronix
+ *
+ * Davicom DM9000(E/A/B) NIC fast Ethernet driver for Barebox
+ *
+ * In some ways inspired by code
+ *
+ * Copyright (C) 1997 Sten Wang
+ * 1997-1998 DAVICOM Semiconductor,Inc.
+ * 2003 Weilun Huang <weilun_huang@davicom.com.tw>
+ * 2003 <saschahauer@web.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#undef DEBUG
+
+#include <init.h>
+#include <common.h>
+#include <driver.h>
+#include <miidev.h>
+#include <net.h>
+#include <io.h>
+#include <xfuncs.h>
+#include <dm9000.h>
+#include <errno.h>
+
+#define DM9K_ID 0x90000A46
+#define CHIPR_DM9000A 0x19
+#define CHIPR_DM9000B 0x1A
+
+#define DM9K_PKT_NONE 0x00 /* no packet received (end marker) */
+#define DM9K_PKT_RDY 0x01 /* packet ready to read */
+#define DM9K_PKT_ERR 0x02 /* chip error */
+#define DM9K_PKT_MAX 1536 /* packet max size */
+
+#define DM9K_NCR 0x00
+# define NCR_EXT_PHY (1 << 7)
+# define NCR_WAKEEN (1 << 6)
+# define NCR_FCOL (1 << 4)
+# define NCR_FDX (1 << 3)
+# define NCR_LBK (3 << 1)
+# define NCR_RST (1 << 0)
+
+#define DM9K_NSR 0x01
+# define NSR_SPEED (1 << 7)
+# define NSR_LINKST (1 << 6)
+# define NSR_WAKEST (1 << 5)
+# define NSR_TX2END (1 << 3)
+# define NSR_TX1END (1 << 2)
+# define NSR_RXOV (1 << 1)
+
+#define DM9K_TCR 0x02
+# define TCR_TJDIS (1 << 6)
+# define TCR_EXCECM (1 << 5)
+# define TCR_PAD_DIS2 (1 << 4)
+# define TCR_CRC_DIS2 (1 << 3)
+# define TCR_PAD_DIS1 (1 << 2)
+# define TCR_CRC_DIS1 (1 << 1)
+# define TCR_TXREQ (1 << 0)
+
+#define DM9K_TSR1 0x03
+#define DM9K_TSR2 0x04
+# define TSR_TJTO (1 << 7)
+# define TSR_LC (1 << 6)
+# define TSR_NC (1 << 5)
+# define TSR_LCOL (1 << 4)
+# define TSR_COL (1 << 3)
+# define TSR_EC (1 << 2)
+
+#define DM9K_RCR 0x05
+# define RCR_WTDIS (1 << 6)
+# define RCR_DIS_LONG (1 << 5)
+# define RCR_DIS_CRC (1 << 4)
+# define RCR_ALL (1 << 3)
+# define RCR_RUNT (1 << 2)
+# define RCR_PRMSC (1 << 1)
+# define RCR_RXEN (1 << 0)
+
+#define DM9K_RSR 0x06
+# define RSR_RF (1 << 7)
+# define RSR_MF (1 << 6)
+# define RSR_LCS (1 << 5)
+# define RSR_RWTO (1 << 4)
+# define RSR_PLE (1 << 3)
+# define RSR_AE (1 << 2)
+# define RSR_CE (1 << 1)
+# define RSR_FOE (1 << 0)
+# define RSR_ERR_MASK (RSR_FOE | RSR_CE | RSR_AE | RSR_PLE | RSR_RWTO | RSR_LCS | RSR_RF)
+
+#define DM9K_ROCR 0x07
+#define DM9K_BPTR 0x08
+#define DM9K_FCTR 0x09
+#define DM9K_FCR 0x0A
+#define DM9K_EPCR 0x0B
+#define DM9K_EPAR 0x0C
+#define DM9K_EPDRL 0x0D
+#define DM9K_EPDRH 0x0E
+#define DM9K_WCR 0x0F
+
+#define DM9K_PAR 0x10
+#define DM9K_MAR 0x16
+
+#define DM9K_GPCR 0x1e
+#define DM9K_GPR 0x1f
+#define DM9K_TRPAL 0x22
+#define DM9K_TRPAH 0x23
+#define DM9K_RWPAL 0x24
+#define DM9K_RWPAH 0x25
+
+#define DM9K_VIDL 0x28
+#define DM9K_VIDH 0x29
+#define DM9K_PIDL 0x2A
+#define DM9K_PIDH 0x2B
+
+#define DM9K_CHIPR 0x2C
+#define DM9K_SMCR 0x2F
+
+#define DM9K_PHY 0x40 /* PHY address 0x01 */
+
+#define DM9K_MRCMDX 0xF0
+#define DM9K_MRCMD 0xF2
+#define DM9K_MRRL 0xF4
+#define DM9K_MRRH 0xF5
+#define DM9K_MWCMDX 0xF6
+#define DM9K_MWCMD 0xF8
+#define DM9K_MWRL 0xFA
+#define DM9K_MWRH 0xFB
+#define DM9K_TXPLL 0xFC
+#define DM9K_TXPLH 0xFD
+
+#define DM9K_ISR 0xFE
+# define ISR_IOM0 (1 << 7) /* 0: 16 bit, 1: 8 bit*/
+# define ISR_LNKCHG (1 << 5) /* link status change */
+# define ISR_UDRUN (1 << 4) /* transmitt underrun */
+# define ISR_ROO (1 << 3) /* receive overflow counter overflow */
+# define ISR_ROS (1 << 2) /* receive overflow */
+# define ISR_PT (1 << 1) /* packet transmitted */
+# define ISR_PR (1 << 0) /* packet received */
+# define ISR_CLEAR_MASK (ISR_PR | ISR_PT | ISR_ROS | ISR_ROO | ISR_UDRUN | ISR_LNKCHG)
+
+#define DM9K_IMR 0xFF
+# define IMR_PAR (1 << 7)
+# define IMR_ROOM (1 << 3)
+# define IMR_ROM (1 << 2)
+# define IMR_PTM (1 << 1)
+# define IMR_PRM (1 << 0)
+
+#define FCTR_HWOT(ot) (( ot & 0xf ) << 4 )
+#define FCTR_LWOT(ot) ( ot & 0xf )
+
+struct dm9k {
+ void __iomem *iobase;
+ void __iomem *iodata;
+ struct mii_device miidev;
+ int buswidth;
+ int srom;
+ uint8_t pckt[2048];
+};
+
+/* ------------------ register access functions -------------------------- */
+
+static uint8_t dm9k_ior(struct dm9k *priv, int reg)
+{
+ writeb(reg, priv->iobase);
+ return readb(priv->iodata);
+}
+
+static void dm9k_iow(struct dm9k *priv, int reg, uint8_t value)
+{
+ writeb(reg, priv->iobase);
+ writeb(value, priv->iodata);
+}
+
+/* ------------------- data move functions ---------------------------- */
+
+static void dm9k_wd_8(void __iomem *port, const void *src, int length)
+{
+ const uint8_t *from = (const uint8_t *)src;
+
+ while (length--)
+ writeb(*from++, port);
+}
+
+static void dm9k_rd_8(void __iomem *port, void *dst, unsigned length)
+{
+ uint8_t *to = (uint8_t *)dst;
+
+ while (length--)
+ *to++ = readb(port);
+}
+
+static void dm9k_dump_8(void __iomem *port, unsigned length)
+{
+ while (length--)
+ readb(port);
+}
+
+static unsigned dm9k_read_packet_status_8(void __iomem *port, unsigned *status)
+{
+ uint16_t st, le;
+
+ dm9k_rd_8(port, &st, sizeof(st));
+ dm9k_rd_8(port, &le, sizeof(le));
+
+ *status = st >> 8;
+ return le;
+}
+
+static void dm9k_wd_16(void __iomem *port, const void *src, int length)
+{
+ const uint16_t *from = (const uint16_t *)src;
+
+ length += 1;
+ length /= 2;
+ while (length--)
+ writew(*from++, port);
+}
+
+static void dm9k_rd_16(void __iomem *port, void *dst, unsigned length)
+{
+ uint16_t *to = (uint16_t *)dst;
+
+ length += 1;
+ length >>= 1;
+ while (length--)
+ *to++ = readw(port);
+}
+
+static void dm9k_dump_16(void __iomem *port, unsigned length)
+{
+ length += 1;
+ length >>= 1;
+ while (length--)
+ readw(port);
+}
+
+static unsigned dm9k_read_packet_status_16(void __iomem *port, unsigned *status)
+{
+ *status = readw(port) >> 8;
+ return le16_to_cpu(readw(port));
+}
+
+static void dm9k_wd_32(void __iomem *port, const void *src, int length)
+{
+ const uint32_t *from = (const uint32_t *)src;
+
+ length += 3;
+ length /= 4;
+ while (length--)
+ writel(*from++, port);
+}
+
+static void dm9k_rd_32(void __iomem *port, void *dst, unsigned length)
+{
+ uint32_t *to = (uint32_t *)dst;
+
+ length += 3;
+ length >>= 2;
+ while (length--)
+ *to++ = readl(port);
+}
+
+static void dm9k_dump_32(void __iomem *port, unsigned length)
+{
+ length += 3;
+ length >>= 2;
+ while (length--)
+ readl(port);
+}
+
+static unsigned dm9k_read_packet_status_32(void __iomem *port, unsigned *status)
+{
+ uint32_t tmp = readl(port);
+
+ *status = (tmp >> 8) & 0xff;
+ return tmp >> 16;
+}
+
+static unsigned dm9k_read_packet_status(int b_width, void __iomem *port, unsigned *status)
+{
+ unsigned rc;
+
+ switch (b_width) {
+ case IORESOURCE_MEM_8BIT:
+ rc = dm9k_read_packet_status_8(port, status);
+ break;
+ case IORESOURCE_MEM_16BIT:
+ rc = dm9k_read_packet_status_16(port, status);
+ break;
+ case IORESOURCE_MEM_32BIT:
+ rc = dm9k_read_packet_status_32(port, status);
+ break;
+ }
+
+ return rc;
+}
+
+static void dm9k_dump(int b_width, void __iomem *port, unsigned length)
+{
+ switch (b_width) {
+ case IORESOURCE_MEM_8BIT:
+ dm9k_dump_8(port, length);
+ break;
+ case IORESOURCE_MEM_16BIT:
+ dm9k_dump_16(port, length);
+ break;
+ case IORESOURCE_MEM_32BIT:
+ dm9k_dump_32(port, length);
+ break;
+ }
+}
+
+static void dm9k_rd(int b_width, void __iomem *port, void *dst, unsigned length)
+{
+ switch (b_width) {
+ case IORESOURCE_MEM_8BIT:
+ dm9k_rd_8(port, dst, length);
+ break;
+ case IORESOURCE_MEM_16BIT:
+ dm9k_rd_16(port, dst, length);
+ break;
+ case IORESOURCE_MEM_32BIT:
+ dm9k_rd_32(port, dst, length);
+ break;
+ }
+}
+
+static void dm9k_wd(int b_width, void __iomem *port, const void *src, int length)
+{
+ switch (b_width) {
+ case IORESOURCE_MEM_8BIT:
+ dm9k_wd_8(port, src, length);
+ break;
+ case IORESOURCE_MEM_16BIT:
+ dm9k_wd_16(port, src, length);
+ break;
+ case IORESOURCE_MEM_32BIT:
+ dm9k_wd_32(port, src, length);
+ break;
+ }
+}
+
+/* ----------------- end of data move functions -------------------------- */
+
+static int dm9k_phy_read(struct mii_device *mdev, int addr, int reg)
+{
+ unsigned val;
+ struct eth_device *edev = mdev->edev;
+ struct dm9k *priv = edev->priv;
+
+ /* Fill the phyxcer register into REG_0C */
+ dm9k_iow(priv, DM9K_EPAR, DM9K_PHY | reg);
+ dm9k_iow(priv, DM9K_EPCR, 0xc); /* Issue phyxcer read command */
+ udelay(100); /* Wait read complete */
+ dm9k_iow(priv, DM9K_EPCR, 0x0); /* Clear phyxcer read command */
+ val = dm9k_ior(priv, DM9K_EPDRH);
+ val <<= 8;
+ val |= dm9k_ior(priv, DM9K_EPDRL);
+
+ /* The read data keeps on REG_0D & REG_0E */
+ debug("phy_read(%d): %d\n", reg, val);
+ return val;
+}
+
+static int dm9k_phy_write(struct mii_device *mdev, int addr, int reg, int val)
+{
+ struct eth_device *edev = mdev->edev;
+ struct dm9k *priv = edev->priv;
+
+ /* Fill the phyxcer register into REG_0C */
+ dm9k_iow(priv, DM9K_EPAR, DM9K_PHY | reg);
+
+ /* Fill the written data into REG_0D & REG_0E */
+ dm9k_iow(priv, DM9K_EPDRL, val);
+ dm9k_iow(priv, DM9K_EPDRH, val >> 8);
+ dm9k_iow(priv, DM9K_EPCR, 0xa); /* Issue phyxcer write command */
+ udelay(500); /* Wait write complete */
+ dm9k_iow(priv, DM9K_EPCR, 0x0); /* Clear phyxcer write command */
+
+ pr_debug("phy_write(reg:%d, value:%d)\n", reg, val);
+
+ return 0;
+}
+
+static int dm9k_check_id(struct dm9k *priv)
+{
+ u32 id;
+ char c;
+
+ id = dm9k_ior(priv, DM9K_VIDL);
+ id |= dm9k_ior(priv, DM9K_VIDH) << 8;
+ id |= dm9k_ior(priv, DM9K_PIDL) << 16;
+ id |= dm9k_ior(priv, DM9K_PIDH) << 24;
+
+ if (id != DM9K_ID) {
+ pr_err("dm9000 not found at 0x%p id: 0x%08x\n", priv->iobase, id);
+ return -ENODEV;
+ }
+
+ id = dm9k_ior(priv, DM9K_CHIPR);
+ pr_debug("dm9000 revision 0x%02x\n", id);
+
+ switch (id) {
+ case CHIPR_DM9000A:
+ c = 'A';
+ break;
+ case CHIPR_DM9000B:
+ c = 'B';
+ break;
+ default:
+ c = 'E';
+ }
+ pr_info("Found DM9000%c at i/o: 0x%p\n", c, priv->iobase);
+
+ return 0;
+}
+
+static void dm9k_enable(struct dm9k *priv)
+{
+ /* only intern phy supported by now */
+ dm9k_iow(priv, DM9K_NCR, 0x00);
+ /* TX Polling clear */
+ dm9k_iow(priv, DM9K_TCR, 0x00);
+ /* Less 3Kb, 200us */
+ dm9k_iow(priv, DM9K_BPTR, 0x3f);
+ /* Flow Control : High/Low Water */
+ dm9k_iow(priv, DM9K_FCTR, FCTR_HWOT(3) | FCTR_LWOT(8));
+ /* SH FIXME: This looks strange! Flow Control */
+ dm9k_iow(priv, DM9K_FCR, 0x00);
+ /* Special Mode */
+ dm9k_iow(priv, DM9K_SMCR, 0x00);
+ /* clear TX status */
+ dm9k_iow(priv, DM9K_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END);
+ /* Clear interrupt status */
+ dm9k_iow(priv, DM9K_IMR, IMR_PAR);
+ dm9k_iow(priv, DM9K_ISR, ISR_CLEAR_MASK);
+
+ /* Activate DM9000 */
+ dm9k_iow(priv, DM9K_GPCR, 0x01); /* Let GPIO0 output */
+ dm9k_iow(priv, DM9K_GPR, 0x00); /* Enable PHY */
+ /* RX enable */
+ dm9k_iow(priv, DM9K_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN);
+ /* Enable TX/RX interrupt mask */
+ dm9k_iow(priv, DM9K_IMR, IMR_PAR | IMR_PRM | IMR_PTM);
+}
+
+static void dm9k_reset(struct dm9k *priv)
+{
+ pr_debug("%s\n", __func__);
+ dm9k_iow(priv, DM9K_NCR, NCR_RST);
+ udelay(1000); /* delay 1ms */
+}
+
+static int dm9k_eth_open(struct eth_device *edev)
+{
+ struct dm9k *priv = (struct dm9k *)edev->priv;
+
+ miidev_wait_aneg(&priv->miidev);
+ miidev_print_status(&priv->miidev);
+ return 0;
+}
+
+static void dm9k_write_length(struct dm9k *priv, unsigned length)
+{
+ dm9k_iow(priv, DM9K_TXPLL, length);
+ dm9k_iow(priv, DM9K_TXPLH, length >> 8);
+}
+
+static int dm9k_wait_for_trans_end(struct dm9k *priv)
+{
+ static const uint64_t toffs = 5 * SECOND; /* FIXME too long */
+ uint8_t status;
+ uint64_t start = get_time_ns();
+
+ do {
+ status = dm9k_ior(priv, DM9K_NSR);
+ if (status & (NSR_TX1END | NSR_TX2END)) {
+ pr_debug("transmitt done\n");
+ return 0;
+ }
+ status = dm9k_ior(priv, DM9K_ISR);
+ if (status & IMR_PTM) {
+ /* Clear Tx bit in ISR */
+ dm9k_iow(priv, DM9K_ISR, IMR_PTM);
+ pr_debug("transmitt done\n");
+ return 0;
+ }
+ } while (!is_timeout(start, toffs));
+
+ return -ETIMEDOUT;
+}
+
+static int dm9k_eth_send(struct eth_device *edev, void *packet, int length)
+{
+ struct dm9k *priv = (struct dm9k *)edev->priv;
+
+ pr_debug("%s: %d bytes\n", __func__, length);
+
+ /* arm the Tx bit */
+ dm9k_iow(priv, DM9K_ISR, IMR_PTM);
+
+ /* Prepare for TX-data */
+ writeb(DM9K_MWCMD, priv->iobase);
+
+ /* Move the packet into the DM9k's TX RAM */
+ dm9k_wd(priv->buswidth, priv->iodata, packet, length);
+
+ /* Set TX length of the packet */
+ dm9k_write_length(priv, length);
+
+ /* Issue TX polling command */
+ dm9k_iow(priv, DM9K_TCR, TCR_TXREQ); /* Cleared after TX complete */
+
+ /* wait for end of transmission */
+ return dm9k_wait_for_trans_end(priv);
+}
+
+static int dm9k_check_for_rx_packet(struct dm9k *priv)
+{
+ uint8_t status;
+
+ status = dm9k_ior(priv, DM9K_ISR);
+ if (!(status & ISR_PR))
+ return 0; /* no packet */
+
+ pr_debug("Packet present\n");
+ dm9k_iow(priv, DM9K_ISR, ISR_PR); /* clear PR status latched in bit 0 */
+ return 1; /* packet present */
+}
+
+static int dm9k_validate_entry(struct dm9k *priv)
+{
+ uint8_t p_stat;
+ /*
+ * setup read pointer to current packet
+ * but without address increment
+ */
+ dm9k_ior(priv, DM9K_MRCMDX);
+
+ /* read the entry's status according to the app note */
+ p_stat = readb(priv->iodata) & 0x03;
+ pr_debug("%s packet status %02X\n", __func__, p_stat);
+
+ switch (p_stat) {
+ case DM9K_PKT_NONE: /* there is no packet (or the last in the chain) */
+ return 0;
+
+ case DM9K_PKT_ERR: /* chip in invalid state. Needs a software reset */
+ pr_debug("Confused chip.\n");
+ dm9k_iow(priv, DM9K_RCR, 0x00); /* Stop Device */
+ dm9k_iow(priv, DM9K_ISR, 0x80); /* Stop INT request */
+ dm9k_reset(priv);
+ dm9k_enable(priv);
+ return 0;
+ }
+
+ return 1; /* entry is valid */
+}
+
+static int dm9k_eth_rx(struct eth_device *edev)
+{
+ struct dm9k *priv = (struct dm9k *)edev->priv;
+ unsigned rx_stat = 0, rx_len = 0;
+ bool p_valid;
+
+ if (dm9k_check_for_rx_packet(priv) == 0)
+ return 0; /* no data present */
+
+ do {
+ if (!dm9k_validate_entry(priv))
+ return 0;
+
+ /* assume this packet is valid */
+ p_valid = true;
+
+ /* read with automatic address increment now */
+ writeb(DM9K_MRCMD, priv->iobase);
+ rx_len = dm9k_read_packet_status(priv->buswidth, priv->iodata, &rx_stat);
+ if (rx_len < 0x40) {
+ pr_debug("Packet too short (%u bytes)\n", rx_len);
+ p_valid = false;
+ }
+
+ /* validate packet */
+ if (rx_stat & RSR_ERR_MASK) {
+ if (rx_stat & RSR_FOE)
+ pr_warn("rx fifo overflow error\n");
+ if (rx_stat & RSR_CE)
+ pr_warn("rx crc error\n");
+ if (rx_stat & RSR_AE)
+ pr_warn("rx Alignment Error error\n");
+ if (rx_stat & RSR_PLE)
+ pr_warn("rx Physical Layer Error error\n");
+ if (rx_stat & RSR_RWTO)
+ pr_warn("rx Receive Watchdog Time Out error\n");
+ if (rx_stat & RSR_LCS)
+ pr_warn("rx Late Collision Seen error\n");
+ if (rx_stat & RSR_RF)
+ pr_warn("rx length error (runt frame)\n");
+ p_valid = false;
+ }
+
+ if (rx_len > DM9K_PKT_MAX) {
+ pr_warn("rx length too big\n");
+ /* discard packet */
+ dm9k_dump(priv->buswidth, priv->iodata, rx_len);
+ dm9k_reset(priv);
+ dm9k_enable(priv);
+ return 0;
+ }
+
+ if (p_valid == true) {
+ pr_debug("Receiving packet\n");
+ dm9k_rd(priv->buswidth, priv->iodata, priv->pckt, rx_len);
+ pr_debug("passing %u bytes packet to upper layer\n", rx_len);
+ net_receive(priv->pckt, rx_len);
+ } else {
+ pr_debug("Discarding packet\n");
+ dm9k_dump(priv->buswidth, priv->iodata, rx_len); /* discard packet */
+ }
+ } while (1);
+
+ return 0;
+}
+
+
+static void dm9k_eth_halt(struct eth_device *edev)
+{
+ pr_debug("eth_halt\n");
+#if 0
+ phy_write(0, 0x8000); /* PHY RESET */
+ dm9k_iow(DM9K_GPR, 0x01); /* Power-Down PHY */
+ dm9k_iow(DM9K_IMR, 0x80); /* Disable all interrupt */
+ dm9k_iow(DM9K_RCR, 0x00); /* Disable RX */
+#endif
+}
+
+static u16 read_srom_word(struct dm9k *priv, int offset)
+{
+ dm9k_iow(priv, DM9K_EPAR, offset);
+ dm9k_iow(priv, DM9K_EPCR, 0x4);
+ udelay(200);
+ dm9k_iow(priv, DM9K_EPCR, 0x0);
+ return (dm9k_ior(priv, DM9K_EPDRL) + (dm9k_ior(priv, DM9K_EPDRH) << 8));
+}
+
+static int dm9k_get_ethaddr(struct eth_device *edev, unsigned char *adr)
+{
+ struct dm9k *priv = (struct dm9k *)edev->priv;
+ int i, oft;
+
+ if (priv->srom) {
+ for (i = 0; i < 3; i++)
+ ((u16 *) adr)[i] = read_srom_word(priv, i);
+ } else {
+ for (i = 0, oft = DM9K_PAR; i < 6; i++, oft++)
+ adr[i] = dm9k_ior(priv, oft);
+ }
+
+ return 0;
+}
+
+static int dm9k_set_ethaddr(struct eth_device *edev, unsigned char *adr)
+{
+ struct dm9k *priv = (struct dm9k *)edev->priv;
+ int i, oft;
+
+ for (i = 0, oft = DM9K_PAR; i < 6; i++, oft++)
+ dm9k_iow(priv, oft, adr[i]);
+ for (i = 0, oft = DM9K_MAR; i < 8; i++, oft++)
+ dm9k_iow(priv, oft, 0xff);
+
+ return 0;
+}
+
+static int dm9k_init_dev(struct eth_device *edev)
+{
+ struct dm9k *priv = (struct dm9k *)edev->priv;
+
+ miidev_restart_aneg(&priv->miidev);
+ return 0;
+}
+
+static int dm9000_probe(struct device_d *dev)
+{
+ unsigned io_mode;
+ struct eth_device *edev;
+ struct dm9k *priv;
+ struct dm9000_platform_data *pdata;
+
+ if (!dev->platform_data) {
+ pr_err("DM9k: no platform_data\n");
+ return -ENODEV;
+ }
+
+ if (dev->num_resources < 2) {
+ pr_err("DM9k: need 2 resources base and data");
+ return -ENODEV;
+ }
+
+ edev = xzalloc(sizeof(struct eth_device) + sizeof(struct dm9k));
+ dev->type_data = edev;
+ edev->priv = (struct dm9k *)(edev + 1);
+
+ pdata = dev->platform_data;
+
+ priv = edev->priv;
+
+ priv->buswidth = dev->resource[0].flags & IORESOURCE_MEM_TYPE_MASK;
+ priv->iodata = dev_request_mem_region(dev, 1);
+ priv->iobase = dev_request_mem_region(dev, 0);
+ priv->srom = pdata->srom;
+
+ edev->init = dm9k_init_dev;
+ edev->open = dm9k_eth_open;
+ edev->send = dm9k_eth_send;
+ edev->recv = dm9k_eth_rx;
+ edev->halt = dm9k_eth_halt;
+ edev->set_ethaddr = dm9k_set_ethaddr;
+ edev->get_ethaddr = dm9k_get_ethaddr;
+ edev->parent = dev;
+
+ /* RESET device */
+ dm9k_reset(priv);
+ if(dm9k_check_id(priv))
+ return -ENODEV;
+
+ io_mode = dm9k_ior(priv, DM9K_ISR) >> 6;
+ switch (io_mode) {
+ case 0:
+ pr_debug("DM9k: 16 bit data bus\n");
+ if (priv->buswidth != IORESOURCE_MEM_16BIT)
+ pr_err("DM9k: Wrong databus width defined at compile time\n");
+ break;
+ case 1:
+ pr_debug("DM9k: 32 bit data bus\n");
+ if (priv->buswidth != IORESOURCE_MEM_32BIT)
+ pr_err("DM9k: Wrong databus width defined at compile time\n");
+ break;
+ case 2:
+ pr_debug("DM9k: 8 bit data bus\n");
+ if (priv->buswidth != IORESOURCE_MEM_32BIT)
+ pr_err("DM9k: Wrong databus width defined at compile time\n");
+ break;
+ default:
+ pr_info("DM9K: Unknown data width\n");
+ }
+
+ dm9k_enable(priv);
+
+ priv->miidev.read = dm9k_phy_read;
+ priv->miidev.write = dm9k_phy_write;
+ priv->miidev.address = 0;
+ priv->miidev.flags = 0;
+ priv->miidev.edev = edev;
+ priv->miidev.parent = dev;
+
+ mii_register(&priv->miidev);
+ eth_register(edev);
+
+ return 0;
+}
+
+static struct driver_d dm9000_driver = {
+ .name = "dm9000",
+ .probe = dm9000_probe,
+};
+
+static int dm9000_init(void)
+{
+ register_driver(&dm9000_driver);
+ return 0;
+}
+
+device_initcall(dm9000_init);
--
1.7.7.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2011-12-12 9:28 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-12 9:27 [PATCH] Add support for the more recent Davicom DM9000A and DM9000B Juergen Beisert
2011-12-12 9:27 ` Juergen Beisert [this message]
2011-12-12 10:42 ` [PATCH 1/2] Add support for more recent Davicom DM9k devices Sascha Hauer
2011-12-12 9:27 ` [PATCH 2/2] Remove the obsolet driver for the DM9000E ethernet device Juergen Beisert
2011-12-12 11:21 [PATCH v2] Add support for the more recent Davicom DM9000A and DM9000 Juergen Beisert
2011-12-12 11:21 ` [PATCH 1/2] Add support for more recent Davicom DM9k devices Juergen Beisert
2011-12-12 16:31 [PATCH v3] Add support for the more recent Davicom DM9000A and DM9000 Juergen Beisert
2011-12-12 16:31 ` [PATCH 1/2] Add support for more recent Davicom DM9k devices Juergen Beisert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1323682057-15434-2-git-send-email-jbe@pengutronix.de \
--to=jbe@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox