mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 4/9] ARM eukrea i.MX51: use generic lowlevel init
Date: Sat, 17 Dec 2011 15:52:04 +0100	[thread overview]
Message-ID: <1324133529-2036-5-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1324133529-2036-1-git-send-email-s.hauer@pengutronix.de>

The lowlevel init function was a 1:1 copy from the babbage
baord, so it should be safe to switch to the generic C
lowlevel init.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Eric Benard <eric@eukrea.com>
---
 arch/arm/boards/eukrea_cpuimx51/Makefile          |    1 -
 arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c |    3 +
 arch/arm/boards/eukrea_cpuimx51/lowlevel_init.S   |  216 ---------------------
 arch/arm/mach-imx/Kconfig                         |    1 -
 4 files changed, 3 insertions(+), 218 deletions(-)
 delete mode 100644 arch/arm/boards/eukrea_cpuimx51/lowlevel_init.S

diff --git a/arch/arm/boards/eukrea_cpuimx51/Makefile b/arch/arm/boards/eukrea_cpuimx51/Makefile
index 0f506a3..0f781c0 100644
--- a/arch/arm/boards/eukrea_cpuimx51/Makefile
+++ b/arch/arm/boards/eukrea_cpuimx51/Makefile
@@ -1,3 +1,2 @@
-obj-y += lowlevel_init.o
 obj-y += eukrea_cpuimx51.o
 obj-y += flash_header.o
diff --git a/arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c b/arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c
index a2db6d9..153ad2f 100644
--- a/arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c
+++ b/arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c
@@ -39,6 +39,7 @@
 #include <mach/imx-nand.h>
 #include <mach/spi.h>
 #include <mach/generic.h>
+#include <mach/imx5.h>
 #include <mach/iomux-mx51.h>
 #include <mach/devices-imx51.h>
 
@@ -139,6 +140,8 @@ static int eukrea_cpuimx51_console_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads, ARRAY_SIZE(eukrea_cpuimx51_pads));
 
+	imx51_init_lowlevel();
+
 	writel(0, 0x73fa8228);
 	writel(0, 0x73fa822c);
 	writel(0, 0x73fa8230);
diff --git a/arch/arm/boards/eukrea_cpuimx51/lowlevel_init.S b/arch/arm/boards/eukrea_cpuimx51/lowlevel_init.S
deleted file mode 100644
index 0b3726f..0000000
--- a/arch/arm/boards/eukrea_cpuimx51/lowlevel_init.S
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * This code is based on the ecos babbage startup code
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <mach/imx-regs.h>
-#include <mach/clock-imx51_53.h>
-
-#define ROM_SI_REV_OFFSET                   0x48
-
-.macro setup_pll pll, freq
-	ldr r2, =\pll
-	ldr r1, =0x00001232
-	str r1, [r2, #MX5_PLL_DP_CTL] /* Set DPLL ON (set UPEN bit): BRMO=1 */
-	mov r1, #0x2
-	str r1, [r2, #MX5_PLL_DP_CONFIG] /* Enable auto-restart AREN bit */
-
-	str r3, [r2, #MX5_PLL_DP_OP]
-	str r3, [r2, #MX5_PLL_DP_HFS_OP]
-
-	str r4, [r2, #MX5_PLL_DP_MFD]
-	str r4, [r2, #MX5_PLL_DP_HFS_MFD]
-
-	str r5, [r2, #MX5_PLL_DP_MFN]
-	str r5, [r2, #MX5_PLL_DP_HFS_MFN]
-
-	ldr r1, =0x00001232
-	str r1, [r2, #MX5_PLL_DP_CTL]
-1:	ldr r1, [r2, #MX5_PLL_DP_CTL]
-	ands r1, r1, #0x1
-	beq 1b
-.endm
-
-#define writel(val, reg) \
-	ldr		r0,	=reg;	\
-	ldr		r1,	=val;	\
-	str		r1,   [r0];
-
-#define IMX51_TO_2
-
-.globl board_init_lowlevel
-board_init_lowlevel:
-	mov     r10, lr
-
-	/* explicitly disable L2 cache */
-	mrc 15, 0, r0, c1, c0, 1
-	bic r0, r0, #0x2
-	mcr 15, 0, r0, c1, c0, 1
-
-	/* reconfigure L2 cache aux control reg */
-	mov r0, #0xC0               /* tag RAM */
-	add r0, r0, #0x4    /* data RAM */
-	orr r0, r0, #(1 << 24)    /* disable write allocate delay */
-	orr r0, r0, #(1 << 23)    /* disable write allocate combine */
-	orr r0, r0, #(1 << 22)    /* disable write allocate */
-
-	ldr r1, =MX51_IROM_BASE_ADDR
-	ldr r3, [r1, #ROM_SI_REV_OFFSET]
-	cmp r3, #0x10
-	orrls r0, r0, #(1 << 25)    /* disable write combine for TO 2 and lower revs */
-
-	mcr 15, 1, r0, c9, c0, 2
-
-	ldr r0, =MX51_CCM_BASE_ADDR
-
-	/* Gate of clocks to the peripherals first */
-	ldr r1, =0x3FFFFFFF
-	str r1, [r0, #MX5_CCM_CCGR0]
-	ldr r1, =0x0
-	str r1, [r0, #MX5_CCM_CCGR1]
-	str r1, [r0, #MX5_CCM_CCGR2]
-	str r1, [r0, #MX5_CCM_CCGR3]
-
-	ldr r1, =0x00030000
-	str r1, [r0, #MX5_CCM_CCGR4]
-	ldr r1, =0x00FFF030
-	str r1, [r0, #MX5_CCM_CCGR5]
-	ldr r1, =0x00000300
-	str r1, [r0, #MX5_CCM_CCGR6]
-
-	/* Disable IPU and HSC dividers */
-	mov r1, #0x60000
-	str r1, [r0, #MX5_CCM_CCDR]
-
-#ifdef IMX51_TO_2
-	/* Make sure to switch the DDR away from PLL 1 */
-	ldr r1, =0x19239145
-	str r1, [r0, #MX5_CCM_CBCDR]
-	/* make sure divider effective */
-1:	ldr r1, [r0, #MX5_CCM_CDHIPR]
-	cmp r1, #0x0
-	bne 1b
-#endif
-
-	/* Switch ARM to step clock */
-	mov r1, #0x4
-	str r1, [r0, #MX5_CCM_CCSR]
-
-	mov r3, #MX5_PLL_DP_OP_800
-	mov r4, #MX5_PLL_DP_MFD_800
-	mov r5, #MX5_PLL_DP_MFN_800
-	setup_pll MX51_PLL1_BASE_ADDR
-
-	mov r3, #MX5_PLL_DP_OP_665
-	mov r4, #MX5_PLL_DP_MFD_665
-	mov r5, #MX5_PLL_DP_MFN_665
-	setup_pll MX51_PLL3_BASE_ADDR
-
-	/* Switch peripheral to PLL 3 */
-	ldr r1, =0x000010C0
-	str r1, [r0, #MX5_CCM_CBCMR]
-	ldr r1, =0x13239145
-	str r1, [r0, #MX5_CCM_CBCDR]
-
-	mov r3, #MX5_PLL_DP_OP_665
-	mov r4, #MX5_PLL_DP_MFD_665
-	mov r5, #MX5_PLL_DP_MFN_665
-	setup_pll MX51_PLL2_BASE_ADDR
-
-	/* Switch peripheral to PLL2 */
-	ldr r1, =0x19239145
-	str r1, [r0, #MX5_CCM_CBCDR]
-	ldr r1, =0x000020C0
-	str r1, [r0, #MX5_CCM_CBCMR]
-
-	mov r3, #MX5_PLL_DP_OP_216
-	mov r4, #MX5_PLL_DP_MFD_216
-	mov r5, #MX5_PLL_DP_MFN_216
-	setup_pll MX51_PLL3_BASE_ADDR
-
-	/* Set the platform clock dividers */
-	ldr r2, =MX51_ARM_BASE_ADDR
-	ldr r1, =0x00000124
-	str r1, [r2, #0x14]
-
-	/* Run TO 3.0 at Full speed, for other TO's wait till we increase VDDGP */
-	ldr r1, =MX51_IROM_BASE_ADDR
-	ldr r3, [r1, #ROM_SI_REV_OFFSET]
-	cmp r3, #0x10
-	movls r1, #0x1
-	movhi r1, #0
-	str r1, [r0, #MX5_CCM_CACRR]
-
-	/* Switch ARM back to PLL 1 */
-	mov r1, #0
-	str r1, [r0,  #MX5_CCM_CCSR]
-
-        /* setup the rest */
-        /* Use lp_apm (24MHz) source for perclk */
-#ifdef IMX51_TO_2
-        ldr r1, =0x000020C2
-        str r1, [r0, #MX5_CCM_CBCMR]
-        // ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz
-        ldr r1, =0x59239100
-        str r1, [r0, #MX5_CCM_CBCDR]
-#else
-        ldr r1, =0x0000E3C2
-        str r1, [r0, #MX5_CCM_CBCMR]
-        // emi=ahb, all perclk dividers are 1 since using 24MHz
-        // DDR divider=6 to have 665/6=110MHz
-        ldr r1, =0x013B9100
-        str r1, [r0, #MX5_CCM_CBCDR]
-#endif
-
-        /* Restore the default values in the Gate registers */
-        ldr r1, =0xFFFFFFFF
-        str r1, [r0, #MX5_CCM_CCGR0]
-        str r1, [r0, #MX5_CCM_CCGR1]
-        str r1, [r0, #MX5_CCM_CCGR2]
-        str r1, [r0, #MX5_CCM_CCGR3]
-        str r1, [r0, #MX5_CCM_CCGR4]
-        str r1, [r0, #MX5_CCM_CCGR5]
-        str r1, [r0, #MX5_CCM_CCGR6]
-
-        /* Use PLL 2 for UART's, get 66.5MHz from it */
-        ldr r1, =0xA5A2A020
-        str r1, [r0, #MX5_CCM_CSCMR1]
-        ldr r1, =0x00C30321
-        str r1, [r0, #MX5_CCM_CSCDR1]
-
-        /* make sure divider effective */
-    1:  ldr r1, [r0, #MX5_CCM_CDHIPR]
-        cmp r1, #0x0
-        bne 1b
-
-	mov r1, #0x0
-	str r1, [r0, #MX5_CCM_CCDR]
-
-	writel(0x1, 0x73fa8074)
-	ldr	r0, =0x73f88000
-	ldr	r1, [r0]
-	orr	r1, #0x40
-	str	r1, [r0]
-
-	ldr	r0, =0x73f88004
-	ldr	r1, [r0]
-	orr	r1, #0x40
-	str	r1, [r0]
-
-	mov	pc, r10
-
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index fa3b184..7da39cb 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -375,7 +375,6 @@ config MACH_FREESCALE_MX51_PDK
 
 config MACH_EUKREA_CPUIMX51SD
 	bool "EUKREA CPUIMX51"
-	select MACH_HAS_LOWLEVEL_INIT
 	help
 	  Say Y here if you are using Eukrea's CPUIMX51 equipped
 	  with a Freescale i.MX51 Processor
-- 
1.7.7.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2011-12-17 14:52 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-17 14:52 Thumb-2 support Sascha Hauer
2011-12-17 14:52 ` [PATCH 1/9] ARM i.MX5: prepare to add a imx51_lowlevel_init Sascha Hauer
2011-12-18 14:03   ` Eric Bénard
2011-12-19 10:18   ` Sascha Hauer
2011-12-17 14:52 ` [PATCH 2/9] ARM i.MX51: implement " Sascha Hauer
2011-12-17 14:52 ` [PATCH 3/9] ARM i.MX51 babbage: use generic lowlevel init function Sascha Hauer
2011-12-17 14:52 ` Sascha Hauer [this message]
2011-12-17 14:52 ` [PATCH 5/9] ARM: update string functions from Linux Kernel Sascha Hauer
2011-12-17 14:52 ` [PATCH 6/9] ARM cache-armv7: use thumb-2 instructions where necessary Sascha Hauer
2011-12-17 14:52 ` [PATCH 7/9] ARM: move exception vectors away from start of binary Sascha Hauer
2011-12-18 23:43   ` Peter Korsgaard
2011-12-20 14:07   ` Jean-Christophe PLAGNIOL-VILLARD
2011-12-21 10:09     ` Sascha Hauer
2012-01-01  4:37   ` Jean-Christophe PLAGNIOL-VILLARD
2012-01-02 14:13     ` Sascha Hauer
2012-01-02 15:09       ` Jean-Christophe PLAGNIOL-VILLARD
2012-01-23 12:07         ` Sascha Hauer
2012-01-24  4:39           ` Jean-Christophe PLAGNIOL-VILLARD
2011-12-17 14:52 ` [PATCH 8/9] ARM: get runtime offset of board_init_lowlevel_return by using separate section Sascha Hauer
2011-12-17 14:52 ` [PATCH 9/9] ARM: Allow to compile in thumb-2 mode Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1324133529-2036-5-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox