From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by casper.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1ReAYz-0004Ht-3Y for barebox@lists.infradead.org; Fri, 23 Dec 2011 19:13:55 +0000 From: Wolfram Sang Date: Fri, 23 Dec 2011 20:13:31 +0100 Message-Id: <1324667611-31597-1-git-send-email-w.sang@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH] mxs: add support for mx28-evk To: barebox@lists.infradead.org This patch adds basic support for the mx28-evk board. Debug UART, MMC and FEC have been successfully used. Signed-off-by: Marc Kleine-Budde Signed-off-by: Wolfram Sang --- arch/arm/Makefile | 1 + arch/arm/boards/freescale-mx28-evk/Makefile | 1 + arch/arm/boards/freescale-mx28-evk/config.h | 16 +++ arch/arm/boards/freescale-mx28-evk/env/config | 67 ++++++++++++ arch/arm/boards/freescale-mx28-evk/mx28-evk.c | 141 +++++++++++++++++++++++++ arch/arm/configs/imx28evk_defconfig | 48 +++++++++ arch/arm/mach-mxs/Kconfig | 7 ++ arch/arm/mach-mxs/include/mach/iomux-imx28.h | 1 + 8 files changed, 282 insertions(+), 0 deletions(-) create mode 100644 arch/arm/boards/freescale-mx28-evk/Makefile create mode 100644 arch/arm/boards/freescale-mx28-evk/config.h create mode 100644 arch/arm/boards/freescale-mx28-evk/env/config create mode 100644 arch/arm/boards/freescale-mx28-evk/mx28-evk.c create mode 100644 arch/arm/configs/imx28evk_defconfig diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 0c42f3d..c981041 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -101,6 +101,7 @@ board-$(CONFIG_MACH_NESO) := guf-neso board-$(CONFIG_MACH_MX23EVK) := freescale-mx23-evk board-$(CONFIG_MACH_CHUMBY) := chumby_falconwing board-$(CONFIG_MACH_TX28) := karo-tx28 +board-$(CONFIG_MACH_MX28EVK) := freescale-mx28-evk board-$(CONFIG_MACH_FREESCALE_MX51_PDK) := freescale-mx51-pdk board-$(CONFIG_MACH_FREESCALE_MX53_LOCO) := freescale-mx53-loco board-$(CONFIG_MACH_GUF_CUPID) := guf-cupid diff --git a/arch/arm/boards/freescale-mx28-evk/Makefile b/arch/arm/boards/freescale-mx28-evk/Makefile new file mode 100644 index 0000000..3e1f53b --- /dev/null +++ b/arch/arm/boards/freescale-mx28-evk/Makefile @@ -0,0 +1 @@ +obj-y += mx28-evk.o diff --git a/arch/arm/boards/freescale-mx28-evk/config.h b/arch/arm/boards/freescale-mx28-evk/config.h new file mode 100644 index 0000000..8f18fda --- /dev/null +++ b/arch/arm/boards/freescale-mx28-evk/config.h @@ -0,0 +1,16 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _CONFIG_H_ +# define _CONFIG_H_ + +#endif /* _CONFIG_H_ */ diff --git a/arch/arm/boards/freescale-mx28-evk/env/config b/arch/arm/boards/freescale-mx28-evk/env/config new file mode 100644 index 0000000..667641d --- /dev/null +++ b/arch/arm/boards/freescale-mx28-evk/env/config @@ -0,0 +1,67 @@ +#!/bin/sh + +machine=mx28-evk +#user= + +# use 'dhcp' to do dhcp in barebox and in kernel +# use 'none' if you want to skip kernel ip autoconfiguration +ip=dhcp + +# or set your networking parameters here +#eth0.ipaddr=a.b.c.d +#eth0.netmask=a.b.c.d +#eth0.serverip=a.b.c.d +#eth0.gateway=a.b.c.d +#eth0.ethaddr=de:ad:be:ef:00:00 + +# can be either 'tftp', 'nfs', 'nand', 'nor' or 'disk' +kernel_loc=tftp +# can be either 'net', 'nand', 'nor', 'disk' or 'initrd' +rootfs_loc=net + +# for flash based rootfs: 'jffs2' or 'ubifs' +# in case of disk any regular filesystem like 'ext2', 'ext3', 'reiserfs' +rootfs_type=ext2 +# where is the rootfs in case of 'rootfs_loc=disk' (linux name) +rootfs_part_linux_dev=mmcblk0p4 +rootfsimage=rootfs-${machine}.$rootfs_type + +# where is the kernel image in case of 'kernel_loc=disk' +kernel_part=disk0.2 + +# The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo +kernelimage_type=zimage +kernelimage=zImage-$machine +#kernelimage_type=uimage +#kernelimage=uImage-$machine +#kernelimage_type=raw +#kernelimage=Image-$machine +#kernelimage_type=raw_lzo +#kernelimage=Image-$machine.lzo + +bareboximage=barebox-${machine}.bin +bareboxenvimage=barebox-${machine}.bin + +if [ -n $user ]; then + bareboximage="$user"-"$bareboximage" + bareboxenvimage="$user"-"$bareboxenvimage" + kernelimage="$user"-"$kernelimage" + rootfsimage="$user"-"$rootfsimage" + nfsroot="/home/$user/nfsroot/$machine" +else + nfsroot="/path/to/nfs/root" +fi + +autoboot_timeout=3 + +bootargs="console=ttyAMA0,115200" + +#nor_parts="256k(barebox)ro,128k(bareboxenv),3M(kernel),-(root)" +#rootfs_mtdblock_nor=3 + +#nand_parts="256k(barebox)ro,128k(bareboxenv),3M(kernel),-(root)" +#nand_device="FIXME" +#rootfs_mtdblock_nand=7 + +# set a fancy prompt (if support is compiled in) +PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m " diff --git a/arch/arm/boards/freescale-mx28-evk/mx28-evk.c b/arch/arm/boards/freescale-mx28-evk/mx28-evk.c new file mode 100644 index 0000000..b80b910 --- /dev/null +++ b/arch/arm/boards/freescale-mx28-evk/mx28-evk.c @@ -0,0 +1,141 @@ +/* + * Copyright (C) 2010 Juergen Beisert, Pengutronix + * Copyright (C) 2011 Marc Kleine-Budde, Pengutronix + * Copyright (C) 2011 Wolfram Sang, Pengutronix + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include + +#define MX28EVK_FEC_PHY_RESET_GPIO 141 + +/* setup the CPU card internal signals */ +static const uint32_t mx28evk_pads[] = { + /* duart */ + PWM0_DUART_RX | VE_3_3V, + PWM1_DUART_TX | VE_3_3V, + + /* fec0 */ + ENET_CLK | VE_3_3V | BITKEEPER(0), + ENET0_MDC | VE_3_3V | PULLUP(1), + ENET0_MDIO | VE_3_3V | PULLUP(1), + ENET0_TXD0 | VE_3_3V | PULLUP(1), + ENET0_TXD1 | VE_3_3V | PULLUP(1), + ENET0_TX_EN | VE_3_3V | PULLUP(1), + ENET0_TX_CLK | VE_3_3V | BITKEEPER(0), + ENET0_RXD0 | VE_3_3V | PULLUP(1), + ENET0_RXD1 | VE_3_3V | PULLUP(1), + ENET0_RX_EN | VE_3_3V | PULLUP(1), + /* send a "good morning" to the ext. phy 0 = reset */ + ENET0_RX_CLK_GPIO | VE_3_3V | PULLUP(0) | GPIO_OUT | GPIO_VALUE(0), + /* phy power control 1 = on */ + SSP1_D3_GPIO | VE_3_3V | PULLUP(0) | GPIO_OUT | GPIO_VALUE(0), + + /* mmc0 */ + SSP0_D0 | VE_3_3V | PULLUP(1), + SSP0_D1 | VE_3_3V | PULLUP(1), + SSP0_D2 | VE_3_3V | PULLUP(1), + SSP0_D3 | VE_3_3V | PULLUP(1), + SSP0_D4 | VE_3_3V | PULLUP(1), + SSP0_D5 | VE_3_3V | PULLUP(1), + SSP0_D6 | VE_3_3V | PULLUP(1), + SSP0_D7 | VE_3_3V | PULLUP(1), + SSP0_CMD | VE_3_3V | PULLUP(1), + SSP0_CD | VE_3_3V | PULLUP(1), + SSP0_SCK | VE_3_3V | BITKEEPER(0), + /* MCI slot power control 1 = off */ + PWM3_GPIO | VE_3_3V | GPIO_OUT | GPIO_VALUE(0), + /* MCI write protect 1 = not protected */ + SSP1_SCK_GPIO | VE_3_3V | GPIO_IN, +}; + +static struct mxs_mci_platform_data mci_pdata = { + .caps = MMC_MODE_8BIT, + .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, /* fixed to 3.3 V */ + .f_min = 400 * 1000, + .f_max = 25000000, +}; + +/* fec */ +static void __init mx28_evk_fec_reset(void) +{ + mdelay(1); + gpio_set_value(MX28EVK_FEC_PHY_RESET_GPIO, 1); +} + +/* PhyAD[0..2]=0, RMIISEL=1 */ +static struct fec_platform_data fec_info = { + .xcv_type = RMII, + .phy_addr = 0, +}; + +static int mx28_evk_mem_init(void) +{ + arm_add_mem_device("ram0", IMX_MEMORY_BASE, 128 * 1024 * 1024); + + return 0; +} +mem_initcall(mx28_evk_mem_init); + +static int mx28_evk_devices_init(void) +{ + int i; + + /* initizalize muxing */ + for (i = 0; i < ARRAY_SIZE(mx28evk_pads); i++) + imx_gpio_mode(mx28evk_pads[i]); + + /* enable IOCLK0 to run at the PLL frequency */ + imx_set_ioclk(0, 480000000); + /* run the SSP unit clock at 100 MHz */ + imx_set_sspclk(0, 100000000, 1); + + armlinux_set_bootparams((void *)IMX_MEMORY_BASE + 0x100); + armlinux_set_architecture(MACH_TYPE_MX28EVK); + + add_generic_device("mxs_mci", 0, NULL, IMX_SSP0_BASE, 0, + IORESOURCE_MEM, &mci_pdata); + + imx_enable_enetclk(); + mx28_evk_fec_reset(); + add_generic_device("fec_imx", 0, NULL, IMX_FEC0_BASE, 0, + IORESOURCE_MEM, &fec_info); + + return 0; +} +device_initcall(mx28_evk_devices_init); + +static int mx28_evk_console_init(void) +{ + add_generic_device("stm_serial", 0, NULL, IMX_DBGUART_BASE, 8192, + IORESOURCE_MEM, NULL); + + return 0; +} +console_initcall(mx28_evk_console_init); diff --git a/arch/arm/configs/imx28evk_defconfig b/arch/arm/configs/imx28evk_defconfig new file mode 100644 index 0000000..1860aef --- /dev/null +++ b/arch/arm/configs/imx28evk_defconfig @@ -0,0 +1,48 @@ +CONFIG_ARCH_MXS=y +CONFIG_ARCH_IMX28=y +CONFIG_MACH_MX28EVK=y +CONFIG_AEABI=y +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y +CONFIG_MMU=y +CONFIG_TEXT_BASE=0x43000000 +CONFIG_MALLOC_SIZE=0x800000 +CONFIG_BROKEN=y +CONFIG_LONGHELP=y +CONFIG_GLOB=y +CONFIG_HUSH_FANCY_PROMPT=y +CONFIG_CMDLINE_EDITING=y +CONFIG_AUTO_COMPLETE=y +CONFIG_PARTITION=y +CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/freescale-mx28-evk/env" +CONFIG_DEBUG_INFO=y +CONFIG_CMD_EDIT=y +CONFIG_CMD_SLEEP=y +CONFIG_CMD_SAVEENV=y +CONFIG_CMD_LOADENV=y +CONFIG_CMD_EXPORT=y +CONFIG_CMD_PRINTENV=y +CONFIG_CMD_READLINE=y +CONFIG_CMD_ECHO_E=y +CONFIG_CMD_MTEST=y +CONFIG_CMD_MTEST_ALTERNATIVE=y +CONFIG_CMD_BOOTM_ZLIB=y +CONFIG_CMD_BOOTM_BZLIB=y +CONFIG_CMD_BOOTM_SHOW_TYPE=y +CONFIG_CMD_RESET=y +CONFIG_CMD_GO=y +CONFIG_CMD_TIMEOUT=y +CONFIG_CMD_PARTITION=y +CONFIG_CMD_GPIO=y +CONFIG_NET=y +CONFIG_NET_DHCP=y +CONFIG_NET_PING=y +CONFIG_NET_TFTP=y +CONFIG_NET_RESOLV=y +CONFIG_DRIVER_NET_FEC_IMX=y +# CONFIG_SPI is not set +CONFIG_MCI=y +CONFIG_MCI_STARTUP=y +CONFIG_MCI_MXS=y +CONFIG_FS_FAT=y +CONFIG_FS_FAT_LFN=y diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index caef7e0..15f7c74 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -5,11 +5,13 @@ config ARCH_TEXT_BASE default 0x41000000 if MACH_MX23EVK default 0x42000000 if MACH_CHUMBY default 0x47000000 if MACH_TX28 + default 0x47000000 if MACH_MX28EVK config BOARDINFO default "Freescale i.MX23-EVK" if MACH_MX23EVK default "Chumby Falconwing" if MACH_CHUMBY default "Karo TX28" if MACH_TX28 + default "Freescale i.MX28-EVK" if MACH_MX28EVK comment "Freescale i.MX System-on-Chip" @@ -57,6 +59,11 @@ config MACH_TX28 help Say Y here if you are using the KARO TX28 CPU module. +config MACH_MX28EVK + bool "mx28-evk" + help + Say Y here if you are using the Freescale i.MX28-EVK board + endchoice endif diff --git a/arch/arm/mach-mxs/include/mach/iomux-imx28.h b/arch/arm/mach-mxs/include/mach/iomux-imx28.h index 1e6d421..1557126 100644 --- a/arch/arm/mach-mxs/include/mach/iomux-imx28.h +++ b/arch/arm/mach-mxs/include/mach/iomux-imx28.h @@ -302,6 +302,7 @@ #define PWM2 (FUNC(0) | PORTF(3, 18)) #define PWM1 (FUNC(0) | PORTF(3, 17)) +#define PWM1_DUART_TX (FUNC(2) | PORTF(3, 17)) #define PWM0 (FUNC(0) | PORTF(3, 16)) #define PWM0_I2C1_SCL (FUNC(1) | PORTF(3, 16)) -- 1.7.7.3 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox