From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1Reuqj-00049S-Mv for barebox@lists.infradead.org; Sun, 25 Dec 2011 20:39:19 +0000 Received: from dude.hi.pengutronix.de ([2001:6f8:1178:2:21e:67ff:fe11:9c5c]) by metis.ext.pengutronix.de with esmtp (Exim 4.72) (envelope-from ) id 1ReuqA-0000hR-M2 for barebox@lists.infradead.org; Sun, 25 Dec 2011 21:38:42 +0100 Received: from jbe by dude.hi.pengutronix.de with local (Exim 4.77) (envelope-from ) id 1ReuqA-0001Lu-HF for barebox@lists.infradead.org; Sun, 25 Dec 2011 21:38:42 +0100 From: Juergen Beisert Date: Sun, 25 Dec 2011 21:38:36 +0100 Message-Id: <1324845517-4601-14-git-send-email-jbe@pengutronix.de> In-Reply-To: <1324845517-4601-1-git-send-email-jbe@pengutronix.de> References: <1324845517-4601-1-git-send-email-jbe@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 13/14] MACH SAMSUNG/S3C: Re-work the memory detection and handling To: barebox@lists.infradead.org Keep common code in the MACH instead of re-inventing it in each platform. Also use S3C* macros for all memory related register. Signed-off-by: Juergen Beisert --- arch/arm/boards/a9m2410/a9m2410.c | 47 ++++++---------------- arch/arm/boards/a9m2410/lowlevel_init.S | 4 +- arch/arm/boards/a9m2440/a9m2410dev.c | 9 ++-- arch/arm/boards/a9m2440/a9m2440.c | 37 +++++++---------- arch/arm/boards/a9m2440/lowlevel_init.S | 6 +- arch/arm/boards/mini2440/lowlevel_init.S | 4 +- arch/arm/boards/mini2440/mini2440.c | 13 +++--- arch/arm/mach-samsung/generic.c | 28 ++++++++----- arch/arm/mach-samsung/include/mach/s3c-busctl.h | 32 +++++++++++++++ arch/arm/mach-samsung/include/mach/s3c-generic.h | 3 +- arch/arm/mach-samsung/include/mach/s3c-iomap.h | 39 ++++++------------ arch/arm/mach-samsung/lowlevel-init.S | 4 +- arch/arm/mach-samsung/s3c24xx-clocks.c | 9 +++- 13 files changed, 119 insertions(+), 116 deletions(-) create mode 100644 arch/arm/mach-samsung/include/mach/s3c-busctl.h diff --git a/arch/arm/boards/a9m2410/a9m2410.c b/arch/arm/boards/a9m2410/a9m2410.c index a66afb9..daaa5c1 100644 --- a/arch/arm/boards/a9m2410/a9m2410.c +++ b/arch/arm/boards/a9m2410/a9m2410.c @@ -34,6 +34,8 @@ #include #include #include +#include +#include // {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0}, static struct s3c24x0_nand_platform_data nand_info = { @@ -42,38 +44,13 @@ static struct s3c24x0_nand_platform_data nand_info = { static int a9m2410_mem_init(void) { - resource_size_t size = 0; - uint32_t reg; + resource_size_t size; /* - * detect the current memory size * Note: On this card the second SDRAM page is not used */ - reg = readl(BANKSIZE); - - switch (reg &= 0x7) { - case 0: - size = 32 * 1024 * 1024; - break; - case 1: - size = 64 * 1024 * 1024; - break; - case 2: - size = 128 * 1024 * 1024; - break; - case 4: - size = 2 * 1024 * 1024; - break; - case 5: - size = 4 * 1024 * 1024; - break; - case 6: - size = 8 * 1024 * 1024; - break; - case 7: - size = 16 * 1024 * 1024; - break; - } + s3c24xx_disable_second_sdram_bank(); + size = s3c24xx_get_memory_size(); /* ---------- configure the GPIOs ------------- */ writel(0x007FFFFF, GPACON); @@ -100,7 +77,7 @@ static int a9m2410_mem_init(void) */ writel(0x40140, MISCCR); - arm_add_mem_device("ram0", CS6_BASE, size); + arm_add_mem_device("ram0", S3C_SDRAM_BASE, size); return 0; } @@ -111,19 +88,19 @@ static int a9m2410_devices_init(void) uint32_t reg; /* ----------- configure the access to the outer space ---------- */ - reg = readl(BWSCON); + reg = readl(S3C_BWSCON); /* CS#1 to access the network controller */ reg &= ~0xf0; reg |= 0xe0; - writel(0x1350, BANKCON1); + writel(0x1350, S3C_BANKCON1); /* CS#2 to the dual 16550 UART */ reg &= ~0xf00; reg |= 0x400; - writel(0x0d50, BANKCON2); + writel(0x0d50, S3C_BANKCON2); - writel(reg, BWSCON); + writel(reg, S3C_BWSCON); /* release the reset signal to the network and UART device */ reg = readl(MISCCR); @@ -138,7 +115,7 @@ static int a9m2410_devices_init(void) * connected to CS line 1 and interrupt line * GPIO3, data width is 32 bit */ - add_generic_device("smc91c111", -1, NULL, CS1_BASE + 0x300, 16, + add_generic_device("smc91c111", -1, NULL, S3C_CS1_BASE + 0x300, 16, IORESOURCE_MEM, NULL); #ifdef CONFIG_NAND @@ -150,7 +127,7 @@ static int a9m2410_devices_init(void) dev_add_bb_dev("env_raw", "env0"); #endif - armlinux_set_bootparams((void*)CS6_BASE + 0x100); + armlinux_set_bootparams((void*)S3C_SDRAM_BASE + 0x100); armlinux_set_architecture(MACH_TYPE_A9M2410); return 0; diff --git a/arch/arm/boards/a9m2410/lowlevel_init.S b/arch/arm/boards/a9m2410/lowlevel_init.S index 752c668..a106d53 100644 --- a/arch/arm/boards/a9m2410/lowlevel_init.S +++ b/arch/arm/boards/a9m2410/lowlevel_init.S @@ -15,9 +15,9 @@ board_init_lowlevel: bl s3c24x0_disable_wd /* skip everything here if we are already running from SDRAM */ - cmp pc, #S3C24X0_SDRAM_BASE + cmp pc, #S3C_SDRAM_BASE blo 1f - cmp pc, #S3C24X0_SDRAM_END + cmp pc, #S3C_SDRAM_END bhs 1f mov pc, r10 diff --git a/arch/arm/boards/a9m2440/a9m2410dev.c b/arch/arm/boards/a9m2440/a9m2410dev.c index aa5da88..1da69eb 100644 --- a/arch/arm/boards/a9m2440/a9m2410dev.c +++ b/arch/arm/boards/a9m2440/a9m2410dev.c @@ -29,6 +29,7 @@ #include #include #include +#include /** * Initialize the CPU to be able to work with the a9m2410dev evaluation board @@ -72,19 +73,19 @@ int a9m2410dev_devices_init(void) writel((readl(MISCCR) & ~0xFFFF) | 0x0140, MISCCR); /* ----------- configure the access to the outer space ---------- */ - reg = readl(BWSCON); + reg = readl(S3C_BWSCON); /* CS#1 to access the network controller */ reg &= ~0xf0; reg |= 0xe0; - writel(0x1350, BANKCON1); + writel(0x1350, S3C_BANKCON1); /* CS#2 to the dual 16550 UART */ reg &= ~0xf00; reg |= 0x400; - writel(0x0d50, BANKCON2); + writel(0x0d50, S3C_BANKCON2); - writel(reg, BWSCON); + writel(reg, S3C_BWSCON); /* release the reset signal to the network and UART device */ reg = readl(MISCCR); diff --git a/arch/arm/boards/a9m2440/a9m2440.c b/arch/arm/boards/a9m2440/a9m2440.c index 077d726..56ae914 100644 --- a/arch/arm/boards/a9m2440/a9m2440.c +++ b/arch/arm/boards/a9m2440/a9m2440.c @@ -35,6 +35,7 @@ #include #include #include +#include #include "baseboards.h" @@ -66,12 +67,6 @@ static int a9m2440_check_for_ram(uint32_t addr) return rc; } -static void a9m2440_disable_second_sdram_bank(void) -{ - writel(readl(BANKCON7) & ~(0x3 << 15),BANKCON7); - writel(readl(MISCCR) | (1 << 18), MISCCR); /* disable clock */ -} - static int a9m2440_mem_init(void) { /* @@ -80,30 +75,30 @@ static int a9m2440_mem_init(void) * So we must check here, if the second bank is populated to get the * correct RAM size. */ - switch (readl(BANKSIZE) & 0x7) { + switch (readl(S3C_BANKSIZE) & 0x7) { case 0: - if (a9m2440_check_for_ram(S3C24X0_SDRAM_BASE + 32 * 1024 * 1024)) - a9m2440_disable_second_sdram_bank(); + if (a9m2440_check_for_ram(S3C_SDRAM_BASE + 32 * 1024 * 1024)) + s3c24xx_disable_second_sdram_bank(); break; case 1: - if (a9m2440_check_for_ram(S3C24X0_SDRAM_BASE + 64 * 1024 * 1024)) - a9m2440_disable_second_sdram_bank(); + if (a9m2440_check_for_ram(S3C_SDRAM_BASE + 64 * 1024 * 1024)) + s3c24xx_disable_second_sdram_bank(); break; case 2: - if (a9m2440_check_for_ram(S3C24X0_SDRAM_BASE + 128 * 1024 * 1024)) - a9m2440_disable_second_sdram_bank(); + if (a9m2440_check_for_ram(S3C_SDRAM_BASE + 128 * 1024 * 1024)) + s3c24xx_disable_second_sdram_bank(); break; case 4: case 5: case 6: /* not supported on this machine */ break; default: - if (a9m2440_check_for_ram(S3C24X0_SDRAM_BASE + 16 * 1024 * 1024)) - a9m2440_disable_second_sdram_bank(); + if (a9m2440_check_for_ram(S3C_SDRAM_BASE + 16 * 1024 * 1024)) + s3c24xx_disable_second_sdram_bank(); break; } - arm_add_mem_device("ram0", CS6_BASE, s3c24x0_get_memory_size()); + arm_add_mem_device("ram0", S3C_SDRAM_BASE, s3c24xx_get_memory_size()); return 0; } @@ -114,14 +109,14 @@ static int a9m2440_devices_init(void) uint32_t reg; /* ----------- configure the access to the outer space ---------- */ - reg = readl(BWSCON); + reg = readl(S3C_BWSCON); /* CS#5 to access the network controller */ reg &= ~0x00f00000; reg |= 0x00d00000; /* 16 bit */ - writel(0x1f4c, BANKCON5); + writel(0x1f4c, S3C_BANKCON5); - writel(reg, BWSCON); + writel(reg, S3C_BWSCON); #ifdef CONFIG_MACH_A9M2410DEV a9m2410dev_devices_init(); @@ -140,7 +135,7 @@ static int a9m2440_devices_init(void) * Connected to CS line 5 + A24 and interrupt line EINT9, * data width is 16 bit */ - add_generic_device("cs8900", -1, NULL, CS5_BASE + (1 << 24) + 0x300, 16, + add_generic_device("cs8900", -1, NULL, S3C_CS5_BASE + (1 << 24) + 0x300, 16, IORESOURCE_MEM, NULL); #ifdef CONFIG_NAND @@ -151,7 +146,7 @@ static int a9m2440_devices_init(void) devfs_add_partition("nand0", 0x40000, 0x20000, PARTITION_FIXED, "env_raw"); dev_add_bb_dev("env_raw", "env0"); #endif - armlinux_set_bootparams((void*)CS6_BASE + 0x100); + armlinux_set_bootparams((void*)S3C_SDRAM_BASE + 0x100); armlinux_set_architecture(MACH_TYPE_A9M2440); return 0; diff --git a/arch/arm/boards/a9m2440/lowlevel_init.S b/arch/arm/boards/a9m2440/lowlevel_init.S index bfdd7f0..57ebe3f 100644 --- a/arch/arm/boards/a9m2440/lowlevel_init.S +++ b/arch/arm/boards/a9m2440/lowlevel_init.S @@ -37,7 +37,7 @@ sdram_init: ldr r4, [r1] and r4, r4, #0x3 - ldr r1, =S3C24X0_MEMCTL_BASE + ldr r1, =S3C_MEMCTL_BASE /* configure both SDRAM areas with 32 bit data bus width */ ldr r0, =((0x2 << 24) + (0x2 << 28)) str r0, [r1], #0x1c /* post add register offset for bank6 */ @@ -218,9 +218,9 @@ board_init_lowlevel: bl s3c24x0_disable_wd /* skip everything here if we are already running from SDRAM */ - cmp pc, #S3C24X0_SDRAM_BASE + cmp pc, #S3C_SDRAM_BASE blo 1f - cmp pc, #S3C24X0_SDRAM_END + cmp pc, #S3C_SDRAM_END bhs 1f mov pc, r10 diff --git a/arch/arm/boards/mini2440/lowlevel_init.S b/arch/arm/boards/mini2440/lowlevel_init.S index f114bb7..1c8860a 100644 --- a/arch/arm/boards/mini2440/lowlevel_init.S +++ b/arch/arm/boards/mini2440/lowlevel_init.S @@ -17,9 +17,9 @@ board_init_lowlevel: bl s3c24x0_disable_wd /* skip everything here if we are already running from SDRAM */ - cmp pc, #S3C24X0_SDRAM_BASE + cmp pc, #S3C_SDRAM_BASE blo 1f - cmp pc, #S3C24X0_SDRAM_END + cmp pc, #S3C_SDRAM_END bhs 1f mov pc, r10 diff --git a/arch/arm/boards/mini2440/mini2440.c b/arch/arm/boards/mini2440/mini2440.c index ec4eb05..29fd5a8 100644 --- a/arch/arm/boards/mini2440/mini2440.c +++ b/arch/arm/boards/mini2440/mini2440.c @@ -43,6 +43,7 @@ #include #include #include +#include static struct s3c24x0_nand_platform_data nand_info = { .nand_timing = CALC_NFCONF_TIMING(MINI2440_TACLS, MINI2440_TWRPH0, @@ -266,7 +267,7 @@ static const unsigned pin_usage[] = { static int mini2440_mem_init(void) { - arm_add_mem_device("ram0", CS6_BASE, s3c24x0_get_memory_size()); + arm_add_mem_device("ram0", S3C_SDRAM_BASE, s3c24xx_get_memory_size()); return 0; } @@ -281,14 +282,14 @@ static int mini2440_devices_init(void) for (i = 0; i < ARRAY_SIZE(pin_usage); i++) s3c_gpio_mode(pin_usage[i]); - reg = readl(BWSCON); + reg = readl(S3C_BWSCON); /* CS#4 to access the network controller */ reg &= ~0x000f0000; reg |= 0x000d0000; /* 16 bit */ - writel(0x1f4c, BANKCON4); + writel(0x1f4c, S3C_BANKCON4); - writel(reg, BWSCON); + writel(reg, S3C_BWSCON); /* release the reset signal to external devices */ reg = readl(MISCCR); @@ -298,7 +299,7 @@ static int mini2440_devices_init(void) add_generic_device("s3c24x0_nand", -1, NULL, S3C24X0_NAND_BASE, 0, IORESOURCE_MEM, &nand_info); - add_dm9000_device(0, CS4_BASE + 0x300, CS4_BASE + 0x304, + add_dm9000_device(0, S3C_CS4_BASE + 0x300, S3C_CS4_BASE + 0x304, IORESOURCE_MEM_16BIT, &dm9000_data); #ifdef CONFIG_NAND /* ----------- add some vital partitions -------- */ @@ -316,7 +317,7 @@ static int mini2440_devices_init(void) IORESOURCE_MEM, &s3c24x0_fb_data); add_generic_device("ohci", 0, NULL, S3C2410_USB_HOST_BASE, 0x100, IORESOURCE_MEM, NULL); - armlinux_set_bootparams((void*)CS6_BASE + 0x100); + armlinux_set_bootparams((void*)S3C_SDRAM_BASE + 0x100); armlinux_set_architecture(MACH_TYPE_MINI2440); return 0; diff --git a/arch/arm/mach-samsung/generic.c b/arch/arm/mach-samsung/generic.c index 4a0c87b..cbe0321 100644 --- a/arch/arm/mach-samsung/generic.c +++ b/arch/arm/mach-samsung/generic.c @@ -27,55 +27,63 @@ #include #include #include +#include #include #include +#include /** * Calculate the amount of connected and available memory * @return Memory size in bytes */ -uint32_t s3c24x0_get_memory_size(void) +uint32_t s3c24xx_get_memory_size(void) { uint32_t reg, size; /* * detect the current memory size */ - reg = readl(BANKSIZE); + reg = readl(S3C_BANKSIZE); switch (reg & 0x7) { case 0: - size = 32 * 1024 * 1024; + size = SZ_32M; break; case 1: - size = 64 * 1024 * 1024; + size = SZ_64M; break; case 2: - size = 128 * 1024 * 1024; + size = SZ_128M; break; case 4: - size = 2 * 1024 * 1024; + size = SZ_2M; break; case 5: - size = 4 * 1024 * 1024; + size = SZ_4M; break; case 6: - size = 8 * 1024 * 1024; + size = SZ_8M; break; default: - size = 16 * 1024 * 1024; + size = SZ_16M; break; } /* * Is bank7 also configured for SDRAM usage? */ - if ((readl(BANKCON7) & (0x3 << 15)) == (0x3 << 15)) + if ((readl(S3C_BANKCON7) & (0x3 << 15)) == (0x3 << 15)) size <<= 1; /* also count this bank */ return size; } +void s3c24xx_disable_second_sdram_bank(void) +{ + writel(readl(S3C_BANKCON7) & ~(0x3 << 15), S3C_BANKCON7); + writel(readl(MISCCR) | (1 << 18), MISCCR); /* disable its clock */ +} + #define S3C_WTCON (S3C_WATCHDOG_BASE) #define S3C_WTDAT (S3C_WATCHDOG_BASE + 0x04) #define S3C_WTCNT (S3C_WATCHDOG_BASE + 0x08) diff --git a/arch/arm/mach-samsung/include/mach/s3c-busctl.h b/arch/arm/mach-samsung/include/mach/s3c-busctl.h new file mode 100644 index 0000000..4bcf0a7 --- /dev/null +++ b/arch/arm/mach-samsung/include/mach/s3c-busctl.h @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2011 Juergen Beisert, Pengutronix + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_S3C_BUSCTL_H +# define __MACH_S3C_BUSCTL_H + +#define S3C_BWSCON (S3C_MEMCTL_BASE) +#define S3C_BANKCON0 (S3C_MEMCTL_BASE + 0x04) +#define S3C_BANKCON1 (S3C_MEMCTL_BASE + 0x08) +#define S3C_BANKCON2 (S3C_MEMCTL_BASE + 0x0c) +#define S3C_BANKCON3 (S3C_MEMCTL_BASE + 0x10) +#define S3C_BANKCON4 (S3C_MEMCTL_BASE + 0x14) +#define S3C_BANKCON5 (S3C_MEMCTL_BASE + 0x18) +#define S3C_BANKCON6 (S3C_MEMCTL_BASE + 0x1c) +#define S3C_BANKCON7 (S3C_MEMCTL_BASE + 0x20) +#define S3C_REFRESH (S3C_MEMCTL_BASE + 0x24) +#define S3C_BANKSIZE (S3C_MEMCTL_BASE + 0x28) +#define S3C_MRSRB6 (S3C_MEMCTL_BASE + 0x2c) +#define S3C_MRSRB7 (S3C_MEMCTL_BASE + 0x30) + +#endif /* __MACH_S3C_BUSCTL_H */ diff --git a/arch/arm/mach-samsung/include/mach/s3c-generic.h b/arch/arm/mach-samsung/include/mach/s3c-generic.h index 33f025d..4ea3dd7 100644 --- a/arch/arm/mach-samsung/include/mach/s3c-generic.h +++ b/arch/arm/mach-samsung/include/mach/s3c-generic.h @@ -30,4 +30,5 @@ uint32_t s3c_get_fclk(void); uint32_t s3c_get_hclk(void); uint32_t s3c_get_pclk(void); uint32_t s3c_get_uclk(void); -uint32_t s3c24x0_get_memory_size(void); +uint32_t s3c24xx_get_memory_size(void); +void s3c24xx_disable_second_sdram_bank(void); diff --git a/arch/arm/mach-samsung/include/mach/s3c-iomap.h b/arch/arm/mach-samsung/include/mach/s3c-iomap.h index 7c45c53..4f713be 100644 --- a/arch/arm/mach-samsung/include/mach/s3c-iomap.h +++ b/arch/arm/mach-samsung/include/mach/s3c-iomap.h @@ -19,9 +19,7 @@ */ /* S3C2410 device base addresses */ -#define S3C24X0_SDRAM_BASE 0x30000000 -#define S3C24X0_SDRAM_END 0x40000000 -#define S3C24X0_MEMCTL_BASE 0x48000000 +#define S3C_MEMCTL_BASE 0x48000000 #define S3C2410_USB_HOST_BASE 0x49000000 #define S3C2410_INTERRUPT_BASE 0x4A000000 #define S3C2410_DMA_BASE 0x4B000000 @@ -40,6 +38,17 @@ #define S3C2410_SPI_BASE 0x59000000 #define S3C2410_SDI_BASE 0x5A000000 +/* external IO space */ +#define S3C_CS0_BASE 0x00000000 +#define S3C_CS1_BASE 0x08000000 +#define S3C_CS2_BASE 0x10000000 +#define S3C_CS3_BASE 0x18000000 +#define S3C_CS4_BASE 0x20000000 +#define S3C_CS5_BASE 0x28000000 +#define S3C_CS6_BASE 0x30000000 + +#define S3C_SDRAM_BASE S3C_CS6_BASE +#define S3C_SDRAM_END (S3C_SDRAM_BASE + 0x10000000) /* * if we are booting from NAND, its internal SRAM occures at @@ -59,21 +68,6 @@ #define S3C_UART3_BASE (S3C_UART_BASE + 0x8000) #define S3C_UART3_SIZE 0x4000 -/* CS configuration (direct access) */ -#define BWSCON (S3C24X0_MEMCTL_BASE) -#define BANKCON0 (S3C24X0_MEMCTL_BASE + 0x04) -#define BANKCON1 (S3C24X0_MEMCTL_BASE + 0x08) -#define BANKCON2 (S3C24X0_MEMCTL_BASE + 0x0c) -#define BANKCON3 (S3C24X0_MEMCTL_BASE + 0x10) -#define BANKCON4 (S3C24X0_MEMCTL_BASE + 0x14) -#define BANKCON5 (S3C24X0_MEMCTL_BASE + 0x18) -#define BANKCON6 (S3C24X0_MEMCTL_BASE + 0x1c) -#define BANKCON7 (S3C24X0_MEMCTL_BASE + 0x20) -#define REFRESH (S3C24X0_MEMCTL_BASE + 0x24) -#define BANKSIZE (S3C24X0_MEMCTL_BASE + 0x28) -#define MRSRB6 (S3C24X0_MEMCTL_BASE + 0x2c) -#define MRSRB7 (S3C24X0_MEMCTL_BASE + 0x30) - /* GPIO registers (direct access) */ #define GPACON (S3C24X0_GPIO_BASE) #define GPADAT (S3C24X0_GPIO_BASE + 0x04) @@ -133,12 +127,3 @@ # define DSC0 (S3C24X0_GPIO_BASE + 0xc4) # define DSC1 (S3C24X0_GPIO_BASE + 0xc8) #endif - -/* external IO space */ -#define CS0_BASE 0x00000000 -#define CS1_BASE 0x08000000 -#define CS2_BASE 0x10000000 -#define CS3_BASE 0x18000000 -#define CS4_BASE 0x20000000 -#define CS5_BASE 0x28000000 -#define CS6_BASE 0x30000000 diff --git a/arch/arm/mach-samsung/lowlevel-init.S b/arch/arm/mach-samsung/lowlevel-init.S index 93ea3ce..31c6196 100644 --- a/arch/arm/mach-samsung/lowlevel-init.S +++ b/arch/arm/mach-samsung/lowlevel-init.S @@ -192,7 +192,7 @@ With m = MDIV + 8, p = PDIV + 2 and s = SDIV. s3c24x0_sdram_init: adr r0, SDRAMDATA /* get the current relative address of the table */ - mov r1, #S3C24X0_MEMCTL_BASE + mov r1, #S3C_MEMCTL_BASE mov r2, #6 /* we *know* it contains 6 entries */ ldr r3, [r0], #4 /* write BSWCON first */ @@ -255,7 +255,7 @@ s3c24x0_nand_boot: * In the case of NOR boot we are running from the same address space. * Detect this case to handle it correctly. */ - mov r1, #S3C24X0_MEMCTL_BASE + mov r1, #S3C_MEMCTL_BASE ldr r3, [r1] and r3, r3, #0x6 cmp r3, #0x0 /* check for NAND case */ diff --git a/arch/arm/mach-samsung/s3c24xx-clocks.c b/arch/arm/mach-samsung/s3c24xx-clocks.c index beacc76..a99d1b9 100644 --- a/arch/arm/mach-samsung/s3c24xx-clocks.c +++ b/arch/arm/mach-samsung/s3c24xx-clocks.c @@ -21,6 +21,7 @@ #include #include #include +#include /** * Calculate the current M-PLL clock. @@ -127,9 +128,11 @@ int s3c24xx_dump_clocks(void) printf("fclk: %7d kHz\n", s3c_get_fclk() / 1000); printf("hclk: %7d kHz\n", s3c_get_hclk() / 1000); printf("pclk: %7d kHz\n", s3c_get_pclk() / 1000); - printf("SDRAM1: CL%d@%dMHz\n", ((readl(BANKCON6) & 0xc) >> 2) + 2, s3c_get_hclk() / 1000000); - if ((readl(BANKCON7) & (0x3 << 15)) == (0x3 << 15)) - printf("SDRAM2: CL%d@%dMHz\n", ((readl(BANKCON7) & 0xc) >> 2) + 2, + printf("SDRAM1: CL%d@%dMHz\n", ((readl(S3C_BANKCON6) & 0xc) >> 2) + 2, + s3c_get_hclk() / 1000000); + if ((readl(S3C_BANKCON7) & (0x3 << 15)) == (0x3 << 15)) + printf("SDRAM2: CL%d@%dMHz\n", + ((readl(S3C_BANKCON7) & 0xc) >> 2) + 2, s3c_get_hclk() / 1000000); return 0; } -- 1.7.7.3 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox