From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 01/12] atmel: reference boards and Caloa boards bbt option enabled
Date: Sat, 31 Dec 2011 16:21:27 +0100 [thread overview]
Message-ID: <1325344898-7076-1-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <20111231151655.GB945@game.jcrosoft.org>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/boards/at91sam9260ek/init.c | 1 +
arch/arm/boards/at91sam9261ek/init.c | 1 +
arch/arm/boards/at91sam9263ek/init.c | 1 +
arch/arm/boards/at91sam9m10g45ek/init.c | 1 +
arch/arm/boards/usb-a926x/init.c | 1 +
5 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boards/at91sam9260ek/init.c b/arch/arm/boards/at91sam9260ek/init.c
index dbd6541..b10d0dc 100644
--- a/arch/arm/boards/at91sam9260ek/init.c
+++ b/arch/arm/boards/at91sam9260ek/init.c
@@ -71,6 +71,7 @@ static struct atmel_nand_data nand_pdata = {
#else
.bus_width_16 = 0,
#endif
+ .on_flash_bbt = 1,
};
static struct sam9_smc_config ek_9260_nand_smc_config = {
diff --git a/arch/arm/boards/at91sam9261ek/init.c b/arch/arm/boards/at91sam9261ek/init.c
index 0854eea..8b192b2 100644
--- a/arch/arm/boards/at91sam9261ek/init.c
+++ b/arch/arm/boards/at91sam9261ek/init.c
@@ -50,6 +50,7 @@ static struct atmel_nand_data nand_pdata = {
#else
.bus_width_16 = 0,
#endif
+ .on_flash_bbt = 1,
};
static struct sam9_smc_config ek_nand_smc_config = {
diff --git a/arch/arm/boards/at91sam9263ek/init.c b/arch/arm/boards/at91sam9263ek/init.c
index bb564d7..d7b9afe 100644
--- a/arch/arm/boards/at91sam9263ek/init.c
+++ b/arch/arm/boards/at91sam9263ek/init.c
@@ -51,6 +51,7 @@ static struct atmel_nand_data nand_pdata = {
#else
.bus_width_16 = 0,
#endif
+ .on_flash_bbt = 1,
};
static struct sam9_smc_config ek_nand_smc_config = {
diff --git a/arch/arm/boards/at91sam9m10g45ek/init.c b/arch/arm/boards/at91sam9m10g45ek/init.c
index 5fdc960..eff2769 100644
--- a/arch/arm/boards/at91sam9m10g45ek/init.c
+++ b/arch/arm/boards/at91sam9m10g45ek/init.c
@@ -72,6 +72,7 @@ static struct atmel_nand_data nand_pdata = {
#else
.bus_width_16 = 0,
#endif
+ .on_flash_bbt = 1,
};
static struct sam9_smc_config ek_nand_smc_config = {
diff --git a/arch/arm/boards/usb-a926x/init.c b/arch/arm/boards/usb-a926x/init.c
index 20af4b0..41daab8 100644
--- a/arch/arm/boards/usb-a926x/init.c
+++ b/arch/arm/boards/usb-a926x/init.c
@@ -57,6 +57,7 @@ static struct atmel_nand_data nand_pdata = {
/* .det_pin = ... not connected */
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
+ .on_flash_bbt = 1,
};
static struct sam9_smc_config usb_a9260_nand_smc_config = {
--
1.7.7
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2011-12-31 15:27 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-31 15:16 AT91: Pull Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-01-03 9:37 ` [PATCH 01/12] atmel: reference boards and Caloa boards bbt option enabled Sascha Hauer
2012-01-03 10:33 ` Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 02/12] ARM: import memcpy_from/toio and memset_io from linux Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 03/12] mtd: atmel_nand: optimize read/write buffer functions Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 04/12] atmel_nand: drop dead code Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 05/12] at91: add sram memory devices Jean-Christophe PLAGNIOL-VILLARD
2012-01-04 13:42 ` Sascha Hauer
2011-12-31 15:21 ` [PATCH 06/12] at91sam9263ek: add nor partition Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 07/12] at91sam9x: switch lowlevel init to c Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 08/12] at91/gpio: simplify resources Jean-Christophe PLAGNIOL-VILLARD
2012-01-04 13:40 ` Sascha Hauer
2012-01-04 18:01 ` Jean-Christophe PLAGNIOL-VILLARD
2012-01-04 18:05 ` Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 09/12] usb-a926x: add led support Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 10/12] usb-a926x: add dfu support Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 11/12] at91_udc: update vbus param only if updated Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 12/12] usb-a926x: update defconfig Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1325344898-7076-1-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox