mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 11/12] at91_udc: update vbus param only if updated
Date: Sat, 31 Dec 2011 16:21:37 +0100	[thread overview]
Message-ID: <1325344898-7076-11-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <20111231151655.GB945@game.jcrosoft.org>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/usb/gadget/at91_udc.c |   17 +++++++++++++++--
 drivers/usb/gadget/at91_udc.h |    1 +
 2 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 9277427..bb0d614 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1315,6 +1315,19 @@ static struct at91_udc controller = {
 
 static void at91_udc_irq (void *_udc);
 
+static void at91_update_vbus(struct at91_udc *udc, u32 value)
+{
+	if (value == udc->gpio_vbus_val)
+		return;
+
+	if (value)
+		dev_set_param(udc->dev, "vbus", "1");
+	else
+		dev_set_param(udc->dev, "vbus", "0");
+
+	udc->gpio_vbus_val = value;
+}
+
 int usb_gadget_poll(void)
 {
 	struct at91_udc	*udc = &controller;
@@ -1327,10 +1340,10 @@ int usb_gadget_poll(void)
 	value ^= udc->board.vbus_active_low;
 
 	if (!value) {
-		dev_set_param(udc->dev, "vbus", "0");
+		at91_update_vbus(udc, value);
 		return 0;
 	}
-	dev_set_param(udc->dev, "vbus", "1");
+	at91_update_vbus(udc, value);
 
 	value = at91_udp_read(udc, AT91_UDP_ISR) & (~(AT91_UDP_SOFINT));
 	if (value)
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index 21aaf39..e592cc5 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -128,6 +128,7 @@ struct at91_udc {
 	unsigned			selfpowered:1;
 	unsigned			active_suspend:1;
 	u8				addr;
+	u32				gpio_vbus_val;
 	struct at91_udc_data		board;
 	struct clk			*iclk, *fclk;
 	struct device_d			*dev;
-- 
1.7.7


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2011-12-31 15:27 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-31 15:16 AT91: Pull Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 01/12] atmel: reference boards and Caloa boards bbt option enabled Jean-Christophe PLAGNIOL-VILLARD
2012-01-03  9:37   ` Sascha Hauer
2012-01-03 10:33     ` Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 02/12] ARM: import memcpy_from/toio and memset_io from linux Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 03/12] mtd: atmel_nand: optimize read/write buffer functions Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 04/12] atmel_nand: drop dead code Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 05/12] at91: add sram memory devices Jean-Christophe PLAGNIOL-VILLARD
2012-01-04 13:42   ` Sascha Hauer
2011-12-31 15:21 ` [PATCH 06/12] at91sam9263ek: add nor partition Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 07/12] at91sam9x: switch lowlevel init to c Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 08/12] at91/gpio: simplify resources Jean-Christophe PLAGNIOL-VILLARD
2012-01-04 13:40   ` Sascha Hauer
2012-01-04 18:01     ` Jean-Christophe PLAGNIOL-VILLARD
2012-01-04 18:05     ` Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 09/12] usb-a926x: add led support Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 10/12] usb-a926x: add dfu support Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2011-12-31 15:21 ` [PATCH 12/12] usb-a926x: update defconfig Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1325344898-7076-11-git-send-email-plagnioj@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox