From: Renaud Barbier <renaud.barbier@ge.com>
To: barebox@lists.infradead.org
Subject: [PATCH 3/9] Added support for the mpc8xxx architecture.
Date: Tue, 24 Jan 2012 12:33:57 +0000 [thread overview]
Message-ID: <1327408443-3519-4-git-send-email-renaud.barbier@ge.com> (raw)
In-Reply-To: <1327408443-3519-1-git-send-email-renaud.barbier@ge.com>
The mpc8xxx directory contains support for the mpc85xx.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
---
arch/ppc/mach-mpc8xxx/Kconfig | 72 +
arch/ppc/mach-mpc8xxx/Makefile | 6 +
arch/ppc/mach-mpc8xxx/cpuid.c | 133 ++
arch/ppc/mach-mpc8xxx/fdt_8xxx.c | 266 +++
arch/ppc/mach-mpc8xxx/fsl_law.c | 259 +++
arch/ppc/mach-mpc8xxx/fsl_lbc.c | 149 ++
arch/ppc/mach-mpc8xxx/include/mach/README | 1 +
arch/ppc/mach-mpc8xxx/include/mach/clock_config.h | 7 +
arch/ppc/mach-mpc8xxx/include/mach/clocks.h | 8 +
arch/ppc/mach-mpc8xxx/include/mach/early_udelay.h | 33 +
arch/ppc/mach-mpc8xxx/include/mach/immap_85xx.h | 2339 +++++++++++++++++++++
arch/ppc/mach-mpc8xxx/include/mach/mpc85xx.h | 29 +
arch/ppc/mach-mpc8xxx/include/mach/nand_upm.h | 36 +
arch/ppc/mach-mpc8xxx/include/mach/ppc_asm.tmpl | 299 +++
arch/ppc/mach-mpc8xxx/include/mach/tsec.h | 664 ++++++
arch/ppc/mach-mpc8xxx/include/mach/uart.h | 38 +
arch/ppc/mach-mpc8xxx/io.S | 128 ++
arch/ppc/mach-mpc8xxx/mpc85xx/Makefile | 14 +
arch/ppc/mach-mpc8xxx/mpc85xx/cpu.c | 347 +++
arch/ppc/mach-mpc8xxx/mpc85xx/cpu_init.c | 263 +++
arch/ppc/mach-mpc8xxx/mpc85xx/cpu_init_early.c | 80 +
arch/ppc/mach-mpc8xxx/mpc85xx/fdt.c | 490 +++++
arch/ppc/mach-mpc8xxx/mpc85xx/fixed_ivor.S | 79 +
arch/ppc/mach-mpc8xxx/mpc85xx/interrupts.c | 113 +
arch/ppc/mach-mpc8xxx/mpc85xx/mp.c | 408 ++++
arch/ppc/mach-mpc8xxx/mpc85xx/mp.h | 22 +
arch/ppc/mach-mpc8xxx/mpc85xx/mpc8544_serdes.c | 95 +
arch/ppc/mach-mpc8xxx/mpc85xx/p2020_serdes.c | 73 +
arch/ppc/mach-mpc8xxx/mpc85xx/release.S | 317 +++
arch/ppc/mach-mpc8xxx/mpc85xx/resetvec.S | 2 +
arch/ppc/mach-mpc8xxx/mpc85xx/speed.c | 213 ++
arch/ppc/mach-mpc8xxx/mpc85xx/start.S | 1236 +++++++++++
arch/ppc/mach-mpc8xxx/mpc85xx/tlb.c | 307 +++
arch/ppc/mach-mpc8xxx/mpc85xx/traps.c | 329 +++
34 files changed, 8855 insertions(+), 0 deletions(-)
create mode 100644 arch/ppc/mach-mpc8xxx/Kconfig
create mode 100644 arch/ppc/mach-mpc8xxx/Makefile
create mode 100644 arch/ppc/mach-mpc8xxx/cpuid.c
create mode 100644 arch/ppc/mach-mpc8xxx/fdt_8xxx.c
create mode 100644 arch/ppc/mach-mpc8xxx/fsl_law.c
create mode 100644 arch/ppc/mach-mpc8xxx/fsl_lbc.c
create mode 100644 arch/ppc/mach-mpc8xxx/include/mach/README
create mode 100644 arch/ppc/mach-mpc8xxx/include/mach/clock_config.h
create mode 100644 arch/ppc/mach-mpc8xxx/include/mach/clocks.h
create mode 100644 arch/ppc/mach-mpc8xxx/include/mach/early_udelay.h
create mode 100644 arch/ppc/mach-mpc8xxx/include/mach/immap_85xx.h
create mode 100644 arch/ppc/mach-mpc8xxx/include/mach/mpc85xx.h
create mode 100644 arch/ppc/mach-mpc8xxx/include/mach/nand_upm.h
create mode 100644 arch/ppc/mach-mpc8xxx/include/mach/ppc_asm.tmpl
create mode 100644 arch/ppc/mach-mpc8xxx/include/mach/tsec.h
create mode 100644 arch/ppc/mach-mpc8xxx/include/mach/uart.h
create mode 100644 arch/ppc/mach-mpc8xxx/io.S
create mode 100644 arch/ppc/mach-mpc8xxx/mpc85xx/Makefile
create mode 100644 arch/ppc/mach-mpc8xxx/mpc85xx/cpu.c
create mode 100644 arch/ppc/mach-mpc8xxx/mpc85xx/cpu_init.c
create mode 100644 arch/ppc/mach-mpc8xxx/mpc85xx/cpu_init_early.c
create mode 100644 arch/ppc/mach-mpc8xxx/mpc85xx/fdt.c
create mode 100644 arch/ppc/mach-mpc8xxx/mpc85xx/fixed_ivor.S
create mode 100644 arch/ppc/mach-mpc8xxx/mpc85xx/interrupts.c
create mode 100644 arch/ppc/mach-mpc8xxx/mpc85xx/mp.c
create mode 100644 arch/ppc/mach-mpc8xxx/mpc85xx/mp.h
create mode 100644 arch/ppc/mach-mpc8xxx/mpc85xx/mpc8544_serdes.c
create mode 100644 arch/ppc/mach-mpc8xxx/mpc85xx/p2020_serdes.c
create mode 100644 arch/ppc/mach-mpc8xxx/mpc85xx/release.S
create mode 100644 arch/ppc/mach-mpc8xxx/mpc85xx/resetvec.S
create mode 100644 arch/ppc/mach-mpc8xxx/mpc85xx/speed.c
create mode 100644 arch/ppc/mach-mpc8xxx/mpc85xx/start.S
create mode 100644 arch/ppc/mach-mpc8xxx/mpc85xx/tlb.c
create mode 100644 arch/ppc/mach-mpc8xxx/mpc85xx/traps.c
diff --git a/arch/ppc/mach-mpc8xxx/Kconfig b/arch/ppc/mach-mpc8xxx/Kconfig
new file mode 100644
index 0000000..c5368af
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/Kconfig
@@ -0,0 +1,72 @@
+if ARCH_MPC8XXX
+
+config TEXT_BASE
+ hex
+ default 0xfff80000 if DA923
+ default 0xeff80000 if P1_P2_RDB
+
+config BOARDINFO
+ default "DA923" if DA923
+ default "P1_P2_RDB" if P1_P2_RDB
+
+config MPC85xx
+ bool
+ default y if DA923
+ default y if P1_P2_RDB
+
+config MPC8544
+ bool
+ default y if DA923
+
+comment "Board selection"
+
+choice
+ prompt "Board selection"
+
+config DA923
+ bool "DA923, GBX460"
+ select HAS_TSEC
+ select HAS_CFI
+ help
+ Say Y here if you are using the GE Intelligent Platforms
+ board aka DA923/GBX460.
+
+config P1_P2_RDB
+ bool "P1_P2_RDB"
+ help
+ Say Y here if you are using the Freescale P1_P2_RDB
+
+endchoice
+
+if P1_P2_RDB
+choice
+ prompt "P1_P2P_RDB development board selection"
+ config P1011
+ bool "P1011RDB"
+ help
+ Say Y if using the P1011RDB
+
+ config P1020
+ bool "P1020RDB"
+ help
+ Say Y if using the P1020RDB
+
+ config P2010
+ bool "P2010RDB"
+ help
+ Say Y if using the P2010RDB
+
+ config P2020
+ bool "P2020RDB"
+ help
+ Say Y if using the P2020RDB
+
+endchoice
+
+config MP
+ bool
+ default y if P2020
+ default y if P1020
+
+endif
+endif
diff --git a/arch/ppc/mach-mpc8xxx/Makefile b/arch/ppc/mach-mpc8xxx/Makefile
new file mode 100644
index 0000000..0721cf8
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/Makefile
@@ -0,0 +1,6 @@
+obj-y += cpuid.o
+obj-y += fsl_lbc.o
+obj-y += fsl_law.o
+#obj-y += uart_early.o
+obj-$(CONFIG_OF_FLAT_TREE) += fdt_8xxx.o
+obj-$(CONFIG_MPC85xx) += mpc85xx/
diff --git a/arch/ppc/mach-mpc8xxx/cpuid.c b/arch/ppc/mach-mpc8xxx/cpuid.c
new file mode 100644
index 0000000..7d3c09d
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/cpuid.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and
+ * arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains
+ * cpu specific common code for 85xx/86xx processors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/global_data.h>
+
+struct cpu_type cpu_type_list [] = {
+#if defined(CONFIG_MPC85xx)
+ CPU_TYPE_ENTRY(8533, 8533, 1),
+ CPU_TYPE_ENTRY(8533, 8533_E, 1),
+ CPU_TYPE_ENTRY(8535, 8535, 1),
+ CPU_TYPE_ENTRY(8535, 8535_E, 1),
+ CPU_TYPE_ENTRY(8536, 8536, 1),
+ CPU_TYPE_ENTRY(8536, 8536_E, 1),
+ CPU_TYPE_ENTRY(8540, 8540, 1),
+ CPU_TYPE_ENTRY(8541, 8541, 1),
+ CPU_TYPE_ENTRY(8541, 8541_E, 1),
+ CPU_TYPE_ENTRY(8543, 8543, 1),
+ CPU_TYPE_ENTRY(8543, 8543_E, 1),
+ CPU_TYPE_ENTRY(8544, 8544, 1),
+ CPU_TYPE_ENTRY(8544, 8544_E, 1),
+ CPU_TYPE_ENTRY(8545, 8545, 1),
+ CPU_TYPE_ENTRY(8545, 8545_E, 1),
+ CPU_TYPE_ENTRY(8547, 8547_E, 1),
+ CPU_TYPE_ENTRY(8548, 8548, 1),
+ CPU_TYPE_ENTRY(8548, 8548_E, 1),
+ CPU_TYPE_ENTRY(8555, 8555, 1),
+ CPU_TYPE_ENTRY(8555, 8555_E, 1),
+ CPU_TYPE_ENTRY(8560, 8560, 1),
+ CPU_TYPE_ENTRY(8567, 8567, 1),
+ CPU_TYPE_ENTRY(8567, 8567_E, 1),
+ CPU_TYPE_ENTRY(8568, 8568, 1),
+ CPU_TYPE_ENTRY(8568, 8568_E, 1),
+ CPU_TYPE_ENTRY(8569, 8569, 1),
+ CPU_TYPE_ENTRY(8569, 8569_E, 1),
+ CPU_TYPE_ENTRY(8572, 8572, 2),
+ CPU_TYPE_ENTRY(8572, 8572_E, 2),
+ CPU_TYPE_ENTRY(P1010, P1010, 1),
+ CPU_TYPE_ENTRY(P1010, P1010_E, 1),
+ CPU_TYPE_ENTRY(P1011, P1011, 1),
+ CPU_TYPE_ENTRY(P1011, P1011_E, 1),
+ CPU_TYPE_ENTRY(P1012, P1012, 1),
+ CPU_TYPE_ENTRY(P1012, P1012_E, 1),
+ CPU_TYPE_ENTRY(P1013, P1013, 1),
+ CPU_TYPE_ENTRY(P1014, P1014_E, 1),
+ CPU_TYPE_ENTRY(P1014, P1014, 1),
+ CPU_TYPE_ENTRY(P1013, P1013_E, 1),
+ CPU_TYPE_ENTRY(P1020, P1020, 2),
+ CPU_TYPE_ENTRY(P1020, P1020_E, 2),
+ CPU_TYPE_ENTRY(P1021, P1021, 2),
+ CPU_TYPE_ENTRY(P1021, P1021_E, 2),
+ CPU_TYPE_ENTRY(P1022, P1022, 2),
+ CPU_TYPE_ENTRY(P1022, P1022_E, 2),
+ CPU_TYPE_ENTRY(P2010, P2010, 1),
+ CPU_TYPE_ENTRY(P2010, P2010_E, 1),
+ CPU_TYPE_ENTRY(P2020, P2020, 2),
+ CPU_TYPE_ENTRY(P2020, P2020_E, 2),
+ CPU_TYPE_ENTRY(P2040, P2040, 4),
+ CPU_TYPE_ENTRY(P2040, P2040_E, 4),
+ CPU_TYPE_ENTRY(P3041, P3041, 4),
+ CPU_TYPE_ENTRY(P3041, P3041_E, 4),
+ CPU_TYPE_ENTRY(P4040, P4040, 4),
+ CPU_TYPE_ENTRY(P4040, P4040_E, 4),
+ CPU_TYPE_ENTRY(P4080, P4080, 8),
+ CPU_TYPE_ENTRY(P4080, P4080_E, 8),
+ CPU_TYPE_ENTRY(P5010, P5010, 1),
+ CPU_TYPE_ENTRY(P5010, P5010_E, 1),
+ CPU_TYPE_ENTRY(P5020, P5020, 2),
+ CPU_TYPE_ENTRY(P5020, P5020_E, 2),
+#elif defined(CONFIG_MPC86xx)
+ CPU_TYPE_ENTRY(8610, 8610, 1),
+ CPU_TYPE_ENTRY(8641, 8641, 2),
+ CPU_TYPE_ENTRY(8641D, 8641D, 2),
+#endif
+};
+
+struct cpu_type cpu_type_unknown = CPU_TYPE_ENTRY(Unknown, Unknown, 1);
+
+struct cpu_type *identify_cpu(u32 ver)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++) {
+ if (cpu_type_list[i].soc_ver == ver)
+ return &cpu_type_list[i];
+ }
+ return &cpu_type_unknown;
+}
+
+int cpu_numcores() {
+ ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC8xxx_PIC_ADDR;
+ struct cpu_type *cpu;
+ uint svr;
+ uint ver;
+
+ svr = get_svr();
+ ver = SVR_SOC_VER(svr);
+ cpu = identify_cpu(ver);
+
+ /* better to query feature reporting register than just assume 1 */
+#define MPC8xxx_PICFRR_NCPU_MASK 0x00001f00
+#define MPC8xxx_PICFRR_NCPU_SHIFT 8
+ if (cpu == &cpu_type_unknown)
+ return ((in_be32(&pic->frr) & MPC8xxx_PICFRR_NCPU_MASK) >>
+ MPC8xxx_PICFRR_NCPU_SHIFT) + 1;
+
+ return cpu->num_cores;
+}
diff --git a/arch/ppc/mach-mpc8xxx/fdt_8xxx.c b/arch/ppc/mach-mpc8xxx/fdt_8xxx.c
new file mode 100644
index 0000000..6958ae6
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/fdt_8xxx.c
@@ -0,0 +1,266 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and
+ * arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains
+ * cpu specific common code for 85xx/86xx processors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/mp.h>
+#include <asm/fsl_enet.h>
+#include <asm/fsl_serdes.h>
+
+#if defined(CONFIG_MP) && (defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx))
+static int ft_del_cpuhandle(void *blob, int cpuhandle)
+{
+ int off, ret = -FDT_ERR_NOTFOUND;
+
+ /* if we find a match, we'll delete at it which point the offsets are
+ * invalid so we start over from the beginning
+ */
+ off = fdt_node_offset_by_prop_value(blob, -1, "cpu-handle",
+ &cpuhandle, 4);
+ while (off != -FDT_ERR_NOTFOUND) {
+ fdt_delprop(blob, off, "cpu-handle");
+ ret = 1;
+ off = fdt_node_offset_by_prop_value(blob, -1, "cpu-handle",
+ &cpuhandle, 4);
+ }
+
+ return ret;
+}
+
+void ft_fixup_num_cores(void *blob) {
+ int off, num_cores, del_cores;
+
+ del_cores = 0;
+ num_cores = cpu_numcores();
+
+ off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+ while (off != -FDT_ERR_NOTFOUND) {
+ u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+
+ if ((*reg > num_cores-1) || (is_core_disabled(*reg))) {
+ int ph = fdt_get_phandle(blob, off);
+
+ /* Delete the cpu node once there are no cpu handles */
+ if (-FDT_ERR_NOTFOUND == ft_del_cpuhandle(blob, ph)) {
+ fdt_del_node(blob, off);
+ del_cores++;
+ }
+ /* either we deleted some cpu handles or the cpu node
+ * so we reset the offset back to the start since we
+ * can't trust the offsets anymore
+ */
+ off = -1;
+ }
+ off = fdt_node_offset_by_prop_value(blob, off,
+ "device_type", "cpu", 4);
+ }
+ debug ("%x core system found\n", num_cores);
+ debug ("deleted %d extra core entry entries from device tree\n",
+ del_cores);
+}
+#endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+void fdt_fixup_dr_usb(void *blob, bd_t *bd)
+{
+ char *mode;
+ char *type;
+ const char *compat = "fsl-usb2-dr";
+ const char *prop_mode = "dr_mode";
+ const char *prop_type = "phy_type";
+ int node_offset;
+ int err;
+
+ mode = getenv("usb_dr_mode");
+ type = getenv("usb_phy_type");
+ if (!mode && !type)
+ return;
+
+ node_offset = fdt_node_offset_by_compatible(blob, 0, compat);
+ if (node_offset < 0) {
+ printf("WARNING: could not find compatible node %s: %s.\n",
+ compat, fdt_strerror(node_offset));
+ return;
+ }
+
+ if (mode) {
+ err = fdt_setprop(blob, node_offset, prop_mode, mode,
+ strlen(mode) + 1);
+ if (err < 0)
+ printf("WARNING: could not set %s for %s: %s.\n",
+ prop_mode, compat, fdt_strerror(err));
+ }
+
+ if (type) {
+ err = fdt_setprop(blob, node_offset, prop_type, type,
+ strlen(type) + 1);
+ if (err < 0)
+ printf("WARNING: could not set %s for %s: %s.\n",
+ prop_type, compat, fdt_strerror(err));
+ }
+}
+#endif /* CONFIG_HAS_FSL_DR_USB */
+
+/*
+ * update crypto node properties to a specified revision of the SEC
+ * called with sec_rev == 0 if not on an E processor
+ */
+#if CONFIG_SYS_FSL_SEC_COMPAT == 2 /* SEC 2.x/3.x */
+void fdt_fixup_crypto_node(void *blob, int sec_rev)
+{
+ const struct sec_rev_prop {
+ u32 sec_rev;
+ u32 num_channels;
+ u32 channel_fifo_len;
+ u32 exec_units_mask;
+ u32 descriptor_types_mask;
+ } sec_rev_prop_list [] = {
+ { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */
+ { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */
+ { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */
+ { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */
+ { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */
+ { 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */
+ { 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */
+ };
+ char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) *
+ sizeof("fsl,secX.Y")];
+ int crypto_node, sec_idx, err;
+ char *p;
+ u32 val;
+
+ /* locate crypto node based on lowest common compatible */
+ crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0");
+ printf("crypto_node = %d, %d\n", crypto_node, -FDT_ERR_NOTFOUND);
+ if (crypto_node < 0)
+ return;
+
+ /* delete it if not on an E-processor */
+ if (crypto_node > 0 && !sec_rev) {
+ fdt_del_node(blob, crypto_node);
+ return;
+ }
+
+ /* else we got called for possible uprev */
+ for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++)
+ {
+ printf("sec_rev = 0x%x, 0x%x\n", sec_rev_prop_list[sec_idx].sec_rev, sec_rev);
+ if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev)
+ break;
+ }
+
+ if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) {
+ puts("warning: unknown SEC revision number\n");
+ return;
+ }
+
+ val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels);
+ err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+
+ val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask);
+ err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+
+ val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask);
+ err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+
+ val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len);
+ err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+
+ val = 0;
+ while (sec_idx >= 0) {
+ p = compat_strlist + val;
+ val += sprintf(p, "fsl,sec%d.%d",
+ (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8,
+ sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1;
+ sec_idx--;
+ }
+ err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+}
+#elif CONFIG_SYS_FSL_SEC_COMPAT >= 4 /* SEC4 */
+void fdt_fixup_crypto_node(void *blob, int sec_rev)
+{
+ if (!sec_rev)
+ fdt_del_node_and_alias(blob, "crypto");
+}
+#endif
+
+int fdt_fixup_phy_connection(void *blob, int offset, enum fsl_phy_enet_if phyc)
+{
+ static const char *fsl_phy_enet_if_str[] = {
+ [MII] = "mii",
+ [RMII] = "rmii",
+ [GMII] = "gmii",
+ [RGMII] = "rgmii",
+ [RGMII_ID] = "rgmii-id",
+ [RGMII_RXID] = "rgmii-rxid",
+ [SGMII] = "sgmii",
+ [TBI] = "tbi",
+ [RTBI] = "rtbi",
+ [XAUI] = "xgmii",
+ [FSL_ETH_IF_NONE] = "",
+ };
+
+ if (phyc > ARRAY_SIZE(fsl_phy_enet_if_str))
+ return fdt_setprop_string(blob, offset, "phy-connection-type", "");
+
+ return fdt_setprop_string(blob, offset, "phy-connection-type",
+ fsl_phy_enet_if_str[phyc]);
+}
+
+#ifdef CONFIG_SYS_SRIO
+void ft_srio_setup(void *blob)
+{
+#ifdef CONFIG_SRIO1
+ if (!is_serdes_configured(SRIO1)) {
+ fdt_del_node_and_alias(blob, "rio0");
+ }
+#else
+ fdt_del_node_and_alias(blob, "rio0");
+#endif
+#ifdef CONFIG_SRIO2
+ if (!is_serdes_configured(SRIO2)) {
+ fdt_del_node_and_alias(blob, "rio1");
+ }
+#else
+ fdt_del_node_and_alias(blob, "rio1");
+#endif
+}
+#endif
diff --git a/arch/ppc/mach-mpc8xxx/fsl_law.c b/arch/ppc/mach-mpc8xxx/fsl_law.c
new file mode 100644
index 0000000..3d15779
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/fsl_law.c
@@ -0,0 +1,259 @@
+/*
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/global_data.h>
+#include <asm/fsl_law.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define FSL_HW_NUM_LAWS CONFIG_SYS_FSL_NUM_LAWS
+
+#ifdef CONFIG_FSL_CORENET
+#define LAW_BASE (CONFIG_SYS_FSL_CORENET_CCM_ADDR)
+#define LAWAR_ADDR(x) (&((ccsr_local_t *)LAW_BASE)->law[x].lawar)
+#define LAWBARH_ADDR(x) (&((ccsr_local_t *)LAW_BASE)->law[x].lawbarh)
+#define LAWBARL_ADDR(x) (&((ccsr_local_t *)LAW_BASE)->law[x].lawbarl)
+#define LAWBAR_SHIFT 0
+#else
+#define LAW_BASE (CONFIG_SYS_IMMR + 0xc08)
+#define LAWAR_ADDR(x) ((u32 *)LAW_BASE + 8 * x + 2)
+#define LAWBAR_ADDR(x) ((u32 *)LAW_BASE + 8 * x)
+#define LAWBAR_SHIFT 12
+#endif
+
+
+static inline phys_addr_t get_law_base_addr(int idx)
+{
+#ifdef CONFIG_FSL_CORENET
+ return (phys_addr_t)
+ ((u64)in_be32(LAWBARH_ADDR(idx)) << 32) |
+ in_be32(LAWBARL_ADDR(idx));
+#else
+ return (phys_addr_t)in_be32(LAWBAR_ADDR(idx)) << LAWBAR_SHIFT;
+#endif
+}
+
+static inline void set_law_base_addr(int idx, phys_addr_t addr)
+{
+#ifdef CONFIG_FSL_CORENET
+ out_be32(LAWBARL_ADDR(idx), addr & 0xffffffff);
+ out_be32(LAWBARH_ADDR(idx), (u64)addr >> 32);
+#else
+ out_be32(LAWBAR_ADDR(idx), addr >> LAWBAR_SHIFT);
+#endif
+}
+
+void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
+{
+ gd->used_laws |= (1 << idx);
+
+ out_be32(LAWAR_ADDR(idx), 0);
+ set_law_base_addr(idx, addr);
+ out_be32(LAWAR_ADDR(idx), LAW_EN | ((u32)id << 20) | (u32)sz);
+
+ /* Read back so that we sync the writes */
+ in_be32(LAWAR_ADDR(idx));
+}
+
+void disable_law(u8 idx)
+{
+ gd->used_laws &= ~(1 << idx);
+
+ out_be32(LAWAR_ADDR(idx), 0);
+ set_law_base_addr(idx, 0);
+
+ /* Read back so that we sync the writes */
+ in_be32(LAWAR_ADDR(idx));
+
+ return;
+}
+
+#ifndef CONFIG_NAND_SPL
+static int get_law_entry(u8 i, struct law_entry *e)
+{
+ u32 lawar;
+
+ lawar = in_be32(LAWAR_ADDR(i));
+
+ if (!(lawar & LAW_EN))
+ return 0;
+
+ e->addr = get_law_base_addr(i);
+ e->size = lawar & 0x3f;
+ e->trgt_id = (lawar >> 20) & 0xff;
+
+ return 1;
+}
+#endif
+
+int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
+{
+ u32 idx = ffz(gd->used_laws);
+
+ if (idx >= FSL_HW_NUM_LAWS)
+ return -1;
+
+ set_law(idx, addr, sz, id);
+
+ return idx;
+}
+
+#ifndef CONFIG_NAND_SPL
+int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
+{
+ u32 idx;
+
+ /* we have no LAWs free */
+ if (gd->used_laws == -1)
+ return -1;
+
+ /* grab the last free law */
+ idx = __ilog2(~(gd->used_laws));
+
+ if (idx >= FSL_HW_NUM_LAWS)
+ return -1;
+
+ set_law(idx, addr, sz, id);
+
+ return idx;
+}
+
+struct law_entry find_law(phys_addr_t addr)
+{
+ struct law_entry entry;
+ int i;
+
+ entry.index = -1;
+ entry.addr = 0;
+ entry.size = 0;
+ entry.trgt_id = 0;
+
+ for (i = 0; i < FSL_HW_NUM_LAWS; i++) {
+ u64 upper;
+
+ if (!get_law_entry(i, &entry))
+ continue;
+
+ upper = entry.addr + (2ull << entry.size);
+ if ((addr >= entry.addr) && (addr < upper)) {
+ entry.index = i;
+ break;
+ }
+ }
+
+ return entry;
+}
+
+void print_laws(void)
+{
+ int i;
+ u32 lawar;
+
+ for (i = 0; i < FSL_HW_NUM_LAWS; i++) {
+ lawar = in_be32(LAWAR_ADDR(i));
+#ifdef CONFIG_FSL_CORENET
+ printf("LAWBARH%02d: 0x%08x LAWBARL%02d: 0x%08x",
+ i, in_be32(LAWBARH_ADDR(i)),
+ i, in_be32(LAWBARL_ADDR(i)));
+#else
+ printf("LAWBAR%02d: 0x%08x", i, in_be32(LAWBAR_ADDR(i)));
+#endif
+ printf(" LAWAR0x%02d: 0x%08x\n", i, lawar);
+ printf("\t(EN: %d TGT: 0x%02x SIZE: ",
+ (lawar & LAW_EN) ? 1 : 0, (lawar >> 20) & 0xff);
+ printf("(%lld)\n", lawar_size(lawar));
+ }
+
+ return;
+}
+
+/* use up to 2 LAWs for DDR, used the last available LAWs */
+int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id)
+{
+ u64 start_align, law_sz;
+ int law_sz_enc;
+
+ if (start == 0)
+ start_align = 1ull << (LAW_SIZE_32G + 1);
+ else
+ start_align = 1ull << (ffs64(start) - 1);
+ law_sz = min(start_align, sz);
+ law_sz_enc = __ilog2_u64(law_sz) - 1;
+
+ if (set_last_law(start, law_sz_enc, id) < 0)
+ return -1;
+
+ /* recalculate size based on what was actually covered by the law */
+ law_sz = 1ull << __ilog2_u64(law_sz);
+
+ /* do we still have anything to map */
+ sz = sz - law_sz;
+ if (sz) {
+ start += law_sz;
+
+ start_align = 1ull << (ffs64(start) - 1);
+ law_sz = min(start_align, sz);
+ law_sz_enc = __ilog2_u64(law_sz) - 1;
+
+ if (set_last_law(start, law_sz_enc, id) < 0)
+ return -1;
+ } else {
+ return 0;
+ }
+
+ /* do we still have anything to map */
+ sz = sz - law_sz;
+ if (sz)
+ return 1;
+
+ return 0;
+}
+#endif
+
+void init_laws(void)
+{
+ int i;
+
+#if FSL_HW_NUM_LAWS < 32
+ gd->used_laws = ~((1 << FSL_HW_NUM_LAWS) - 1);
+#elif FSL_HW_NUM_LAWS == 32
+ gd->used_laws = 0;
+#else
+#error FSL_HW_NUM_LAWS can not be greater than 32 w/o code changes
+#endif
+
+ for (i = 0; i < num_law_entries; i++) {
+ if (law_table[i].index == -1)
+ set_next_law(law_table[i].addr, law_table[i].size,
+ law_table[i].trgt_id);
+ else
+ set_law(law_table[i].index, law_table[i].addr,
+ law_table[i].size, law_table[i].trgt_id);
+ }
+
+ return ;
+}
diff --git a/arch/ppc/mach-mpc8xxx/fsl_lbc.c b/arch/ppc/mach-mpc8xxx/fsl_lbc.c
new file mode 100644
index 0000000..7598ebf
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/fsl_lbc.c
@@ -0,0 +1,149 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/fsl_lbc.h>
+
+#ifdef CONFIG_MPC85xx
+/* Boards should provide their own version of this if they use lbc sdram */
+void __lbc_sdram_init(void)
+{
+ /* Do nothing */
+}
+void lbc_sdram_init(void) __attribute__((weak, alias("__lbc_sdram_init")));
+#endif
+
+
+void print_lbc_regs(void)
+{
+ int i;
+
+ printf("\nLocal Bus Controller Registers\n");
+ for (i = 0; i < 8; i++) {
+ printf("BR%d\t0x%08X\tOR%d\t0x%08X\n",
+ i, get_lbc_br(i), i, get_lbc_or(i));
+ }
+}
+
+void init_early_memctl_regs(void)
+{
+ uint init_br1 = 1;
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_ELBC_A001
+ /* Set the local bus monitor timeout value to the maximum */
+ clrsetbits_be32(&(LBC_BASE_ADDR)->lbcr, LBCR_BMT|LBCR_BMTPS, 0xf);
+#endif
+
+#ifdef CONFIG_MPC85xx
+ /* if cs1 is already set via debugger, leave cs0/cs1 alone */
+ if (get_lbc_br(1) & BR_V)
+ init_br1 = 0;
+#endif
+
+ /*
+ * Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at
+ * preliminary addresses - these have to be modified later
+ * when FLASH size has been determined
+ */
+#if defined(CONFIG_SYS_OR0_REMAP)
+ set_lbc_or(0, CONFIG_SYS_OR0_REMAP);
+#endif
+#if defined(CONFIG_SYS_OR1_REMAP)
+ set_lbc_or(1, CONFIG_SYS_OR1_REMAP);
+#endif
+ /* now restrict to preliminary range */
+ if (init_br1) {
+ set_lbc_br(0, CONFIG_SYS_BR0_PRELIM);
+ set_lbc_or(0, CONFIG_SYS_OR0_PRELIM);
+
+#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
+ set_lbc_or(1, CONFIG_SYS_OR1_PRELIM);
+ set_lbc_br(1, CONFIG_SYS_BR1_PRELIM);
+#endif
+ }
+
+#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
+ set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
+ set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
+ set_lbc_or(3, CONFIG_SYS_OR3_PRELIM);
+ set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
+ set_lbc_or(4, CONFIG_SYS_OR4_PRELIM);
+ set_lbc_br(4, CONFIG_SYS_BR4_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
+ set_lbc_or(5, CONFIG_SYS_OR5_PRELIM);
+ set_lbc_br(5, CONFIG_SYS_BR5_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
+ set_lbc_or(6, CONFIG_SYS_OR6_PRELIM);
+ set_lbc_br(6, CONFIG_SYS_BR6_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
+ set_lbc_or(7, CONFIG_SYS_OR7_PRELIM);
+ set_lbc_br(7, CONFIG_SYS_BR7_PRELIM);
+#endif
+}
+
+/*
+ * Configures a UPM. The function requires the respective MxMR to be set
+ * before calling this function. "size" is the number or entries, not a sizeof.
+ */
+void upmconfig(uint upm, uint *table, uint size)
+{
+ fsl_lbc_t *lbc = LBC_BASE_ADDR;
+ int i, mdr, mad, old_mad = 0;
+ u32 mask = (~MxMR_OP_MSK & ~MxMR_MAD_MSK);
+ u32 msel = BR_UPMx_TO_MSEL(upm);
+ u32 *mxmr = &lbc->mamr + upm;
+ volatile u8 *dummy = NULL;
+
+ if (upm < UPMA || upm > UPMC) {
+ printf("Error: %s() Bad UPM index %d\n", __func__, upm);
+ hang();
+ }
+
+ /*
+ * Find the address for the dummy write - scan all of the BRs until we
+ * find one matching the UPM and extract the base address bits from it.
+ */
+ for (i = 0; i < 8; i++) {
+ if ((get_lbc_br(i) & (BR_V | BR_MSEL)) == (BR_V | msel)) {
+ dummy = (volatile u8 *)(get_lbc_br(i) & BR_BA);
+ break;
+ }
+ }
+
+ if (!dummy) {
+ printf("Error: %s() No matching BR\n", __func__);
+ hang();
+ }
+
+ /* Program UPM using steps outlined by the reference manual */
+ for (i = 0; i < size; i++) {
+ out_be32(mxmr, (in_be32(mxmr) & mask) | MxMR_OP_WARR | i);
+ out_be32(&lbc->mdr, table[i]);
+ mdr = in_be32(&lbc->mdr);
+ *dummy = 0;
+ do {
+ mad = in_be32(mxmr) & MxMR_MAD_MSK;
+ } while (mad <= old_mad && !(!mad && i == (size-1)));
+ old_mad = mad;
+ }
+
+ /* Return to normal operation */
+ out_be32(mxmr, (in_be32(mxmr) & mask) | MxMR_OP_NORM);
+}
diff --git a/arch/ppc/mach-mpc8xxx/include/mach/README b/arch/ppc/mach-mpc8xxx/include/mach/README
new file mode 100644
index 0000000..ae3193e
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/include/mach/README
@@ -0,0 +1 @@
+ppc_asm.tmpl should be in include /asm
diff --git a/arch/ppc/mach-mpc8xxx/include/mach/clock_config.h b/arch/ppc/mach-mpc8xxx/include/mach/clock_config.h
new file mode 100644
index 0000000..3e81164
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/include/mach/clock_config.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_ARCH_CLOCK_CONFIG_H
+#define __ASM_ARCH_CLOCK_CONFIG_H
+
+#define CONFIG_CLOCKSOURCE_MASK 64
+#define CONFIG_CLOCKSOURCE_SHIFT 22
+
+#endif /* __ASM_ARCH_CLOCK_CONFIG_H */
diff --git a/arch/ppc/mach-mpc8xxx/include/mach/clocks.h b/arch/ppc/mach-mpc8xxx/include/mach/clocks.h
new file mode 100644
index 0000000..370c05c
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/include/mach/clocks.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_ARCH_CLOCKS_H
+#define __ASM_ARCH_CLOCKS_H
+
+unsigned long get_cpu_clock(void);
+ulong get_ddr_freq (ulong dummy);
+unsigned long get_lbc_clock(void);
+
+#endif /* __ASM_ARCH_CLOCKS_H */
diff --git a/arch/ppc/mach-mpc8xxx/include/mach/early_udelay.h b/arch/ppc/mach-mpc8xxx/include/mach/early_udelay.h
new file mode 100644
index 0000000..472dbdc
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/include/mach/early_udelay.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* delay execution before timers are initialized */
+static inline void early_udelay(uint32_t usecs)
+{
+ /* loop takes 4 cycles. */
+ volatile uint32_t loops = usecs * (1000 / 4); /* CPU freq = 1Ghz */
+
+ while(loops)
+ loops--;
+}
diff --git a/arch/ppc/mach-mpc8xxx/include/mach/immap_85xx.h b/arch/ppc/mach-mpc8xxx/include/mach/immap_85xx.h
new file mode 100644
index 0000000..eb98a77
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/include/mach/immap_85xx.h
@@ -0,0 +1,2339 @@
+/*
+ * MPC85xx Internal Memory Map
+ *
+ * Copyright 2007-2011 Freescale Semiconductor, Inc.
+ *
+ * Copyright(c) 2002,2003 Motorola Inc.
+ * Xianghua Xiao (x.xiao@motorola.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IMMAP_85xx__
+#define __IMMAP_85xx__
+
+#include <asm/types.h>
+#include <asm/fsl_dma.h>
+#include <asm/fsl_i2c.h>
+#include <asm/fsl_lbc.h>
+#include <asm/fsl_fman.h>
+#include <asm/config.h>
+
+typedef struct ccsr_local {
+ u32 ccsrbarh; /* CCSR Base Addr High */
+ u32 ccsrbarl; /* CCSR Base Addr Low */
+ u32 ccsrar; /* CCSR Attr */
+#define CCSRAR_C 0x80000000 /* Commit */
+ u8 res1[4];
+ u32 altcbarh; /* Alternate Configuration Base Addr High */
+ u32 altcbarl; /* Alternate Configuration Base Addr Low */
+ u32 altcar; /* Alternate Configuration Attr */
+ u8 res2[4];
+ u32 bstrh; /* Boot space translation high */
+ u32 bstrl; /* Boot space translation Low */
+ u32 bstrar; /* Boot space translation attributes */
+ u8 res3[0xbd4];
+ struct {
+ u32 lawbarh; /* LAWn base addr high */
+ u32 lawbarl; /* LAWn base addr low */
+ u32 lawar; /* LAWn attributes */
+ u8 res4[4];
+ } law[32];
+ u8 res35[0x204];
+} ccsr_local_t;
+
+/* Local-Access Registers & ECM Registers */
+typedef struct ccsr_local_ecm {
+ u32 ccsrbar; /* CCSR Base Addr */
+ u8 res1[4];
+ u32 altcbar; /* Alternate Configuration Base Addr */
+ u8 res2[4];
+ u32 altcar; /* Alternate Configuration Attr */
+ u8 res3[12];
+ u32 bptr; /* Boot Page Translation */
+ u8 res4[3044];
+ u32 lawbar0; /* Local Access Window 0 Base Addr */
+ u8 res5[4];
+ u32 lawar0; /* Local Access Window 0 Attrs */
+ u8 res6[20];
+ u32 lawbar1; /* Local Access Window 1 Base Addr */
+ u8 res7[4];
+ u32 lawar1; /* Local Access Window 1 Attrs */
+ u8 res8[20];
+ u32 lawbar2; /* Local Access Window 2 Base Addr */
+ u8 res9[4];
+ u32 lawar2; /* Local Access Window 2 Attrs */
+ u8 res10[20];
+ u32 lawbar3; /* Local Access Window 3 Base Addr */
+ u8 res11[4];
+ u32 lawar3; /* Local Access Window 3 Attrs */
+ u8 res12[20];
+ u32 lawbar4; /* Local Access Window 4 Base Addr */
+ u8 res13[4];
+ u32 lawar4; /* Local Access Window 4 Attrs */
+ u8 res14[20];
+ u32 lawbar5; /* Local Access Window 5 Base Addr */
+ u8 res15[4];
+ u32 lawar5; /* Local Access Window 5 Attrs */
+ u8 res16[20];
+ u32 lawbar6; /* Local Access Window 6 Base Addr */
+ u8 res17[4];
+ u32 lawar6; /* Local Access Window 6 Attrs */
+ u8 res18[20];
+ u32 lawbar7; /* Local Access Window 7 Base Addr */
+ u8 res19[4];
+ u32 lawar7; /* Local Access Window 7 Attrs */
+ u8 res19_8a[20];
+ u32 lawbar8; /* Local Access Window 8 Base Addr */
+ u8 res19_8b[4];
+ u32 lawar8; /* Local Access Window 8 Attrs */
+ u8 res19_9a[20];
+ u32 lawbar9; /* Local Access Window 9 Base Addr */
+ u8 res19_9b[4];
+ u32 lawar9; /* Local Access Window 9 Attrs */
+ u8 res19_10a[20];
+ u32 lawbar10; /* Local Access Window 10 Base Addr */
+ u8 res19_10b[4];
+ u32 lawar10; /* Local Access Window 10 Attrs */
+ u8 res19_11a[20];
+ u32 lawbar11; /* Local Access Window 11 Base Addr */
+ u8 res19_11b[4];
+ u32 lawar11; /* Local Access Window 11 Attrs */
+ u8 res20[652];
+ u32 eebacr; /* ECM CCB Addr Configuration */
+ u8 res21[12];
+ u32 eebpcr; /* ECM CCB Port Configuration */
+ u8 res22[3564];
+ u32 eedr; /* ECM Error Detect */
+ u8 res23[4];
+ u32 eeer; /* ECM Error Enable */
+ u32 eeatr; /* ECM Error Attrs Capture */
+ u32 eeadr; /* ECM Error Addr Capture */
+ u8 res24[492];
+} ccsr_local_ecm_t;
+
+/* DDR memory controller registers */
+typedef struct ccsr_ddr {
+ u32 cs0_bnds; /* Chip Select 0 Memory Bounds */
+ u8 res1[4];
+ u32 cs1_bnds; /* Chip Select 1 Memory Bounds */
+ u8 res2[4];
+ u32 cs2_bnds; /* Chip Select 2 Memory Bounds */
+ u8 res3[4];
+ u32 cs3_bnds; /* Chip Select 3 Memory Bounds */
+ u8 res4[100];
+ u32 cs0_config; /* Chip Select Configuration */
+ u32 cs1_config; /* Chip Select Configuration */
+ u32 cs2_config; /* Chip Select Configuration */
+ u32 cs3_config; /* Chip Select Configuration */
+ u8 res4a[48];
+ u32 cs0_config_2; /* Chip Select Configuration 2 */
+ u32 cs1_config_2; /* Chip Select Configuration 2 */
+ u32 cs2_config_2; /* Chip Select Configuration 2 */
+ u32 cs3_config_2; /* Chip Select Configuration 2 */
+ u8 res5[48];
+ u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */
+ u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */
+ u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */
+ u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */
+ u32 sdram_cfg; /* SDRAM Control Configuration */
+ u32 sdram_cfg_2; /* SDRAM Control Configuration 2 */
+ u32 sdram_mode; /* SDRAM Mode Configuration */
+ u32 sdram_mode_2; /* SDRAM Mode Configuration 2 */
+ u32 sdram_md_cntl; /* SDRAM Mode Control */
+ u32 sdram_interval; /* SDRAM Interval Configuration */
+ u32 sdram_data_init; /* SDRAM Data initialization */
+ u8 res6[4];
+ u32 sdram_clk_cntl; /* SDRAM Clock Control */
+ u8 res7[20];
+ u32 init_addr; /* training init addr */
+ u32 init_ext_addr; /* training init extended addr */
+ u8 res8_1[16];
+ u32 timing_cfg_4; /* SDRAM Timing Configuration 4 */
+ u32 timing_cfg_5; /* SDRAM Timing Configuration 5 */
+ u8 reg8_1a[8];
+ u32 ddr_zq_cntl; /* ZQ calibration control*/
+ u32 ddr_wrlvl_cntl; /* write leveling control*/
+ u8 reg8_1aa[4];
+ u32 ddr_sr_cntr; /* self refresh counter */
+ u32 ddr_sdram_rcw_1; /* Control Words 1 */
+ u32 ddr_sdram_rcw_2; /* Control Words 2 */
+ u8 reg_1ab[8];
+ u32 ddr_wrlvl_cntl_2; /* write leveling control 2 */
+ u32 ddr_wrlvl_cntl_3; /* write leveling control 3 */
+ u8 res8_1b[104];
+ u32 sdram_mode_3; /* SDRAM Mode Configuration 3 */
+ u32 sdram_mode_4; /* SDRAM Mode Configuration 4 */
+ u32 sdram_mode_5; /* SDRAM Mode Configuration 5 */
+ u32 sdram_mode_6; /* SDRAM Mode Configuration 6 */
+ u32 sdram_mode_7; /* SDRAM Mode Configuration 7 */
+ u32 sdram_mode_8; /* SDRAM Mode Configuration 8 */
+ u8 res8_1ba[0x908];
+ u32 ddr_dsr1; /* Debug Status 1 */
+ u32 ddr_dsr2; /* Debug Status 2 */
+ u32 ddr_cdr1; /* Control Driver 1 */
+ u32 ddr_cdr2; /* Control Driver 2 */
+ u8 res8_1c[200];
+ u32 ip_rev1; /* IP Block Revision 1 */
+ u32 ip_rev2; /* IP Block Revision 2 */
+ u32 eor; /* Enhanced Optimization Register */
+ u8 res8_2[252];
+ u32 mtcr; /* Memory Test Control Register */
+ u8 res8_3[28];
+ u32 mtp1; /* Memory Test Pattern 1 */
+ u32 mtp2; /* Memory Test Pattern 2 */
+ u32 mtp3; /* Memory Test Pattern 3 */
+ u32 mtp4; /* Memory Test Pattern 4 */
+ u32 mtp5; /* Memory Test Pattern 5 */
+ u32 mtp6; /* Memory Test Pattern 6 */
+ u32 mtp7; /* Memory Test Pattern 7 */
+ u32 mtp8; /* Memory Test Pattern 8 */
+ u32 mtp9; /* Memory Test Pattern 9 */
+ u32 mtp10; /* Memory Test Pattern 10 */
+ u8 res8_4[184];
+ u32 data_err_inject_hi; /* Data Path Err Injection Mask High */
+ u32 data_err_inject_lo; /* Data Path Err Injection Mask Low */
+ u32 ecc_err_inject; /* Data Path Err Injection Mask ECC */
+ u8 res9[20];
+ u32 capture_data_hi; /* Data Path Read Capture High */
+ u32 capture_data_lo; /* Data Path Read Capture Low */
+ u32 capture_ecc; /* Data Path Read Capture ECC */
+ u8 res10[20];
+ u32 err_detect; /* Error Detect */
+ u32 err_disable; /* Error Disable */
+ u32 err_int_en;
+ u32 capture_attributes; /* Error Attrs Capture */
+ u32 capture_address; /* Error Addr Capture */
+ u32 capture_ext_address; /* Error Extended Addr Capture */
+ u32 err_sbe; /* Single-Bit ECC Error Management */
+ u8 res11[164];
+ u32 debug[32]; /* debug_1 to debug_32 */
+ u8 res12[128];
+} ccsr_ddr_t;
+
+#define DDR_EOR_RD_BDW_OPT_DIS 0x80000000 /* Read BDW Opt. disable */
+#define DDR_EOR_ADDR_HASH_EN 0x40000000 /* Address hash enabled */
+
+/* I2C Registers */
+typedef struct ccsr_i2c {
+ struct fsl_i2c i2c[1];
+ u8 res[4096 - 1 * sizeof(struct fsl_i2c)];
+} ccsr_i2c_t;
+
+#if defined(CONFIG_MPC8540) \
+ || defined(CONFIG_MPC8541) \
+ || defined(CONFIG_MPC8548) \
+ || defined(CONFIG_MPC8555)
+/* DUART Registers */
+typedef struct ccsr_duart {
+ u8 res1[1280];
+/* URBR1, UTHR1, UDLB1 with the same addr */
+ u8 urbr1_uthr1_udlb1;
+/* UIER1, UDMB1 with the same addr01 */
+ u8 uier1_udmb1;
+/* UIIR1, UFCR1, UAFR1 with the same addr */
+ u8 uiir1_ufcr1_uafr1;
+ u8 ulcr1; /* UART1 Line Control */
+ u8 umcr1; /* UART1 Modem Control */
+ u8 ulsr1; /* UART1 Line Status */
+ u8 umsr1; /* UART1 Modem Status */
+ u8 uscr1; /* UART1 Scratch */
+ u8 res2[8];
+ u8 udsr1; /* UART1 DMA Status */
+ u8 res3[239];
+/* URBR2, UTHR2, UDLB2 with the same addr */
+ u8 urbr2_uthr2_udlb2;
+/* UIER2, UDMB2 with the same addr */
+ u8 uier2_udmb2;
+/* UIIR2, UFCR2, UAFR2 with the same addr */
+ u8 uiir2_ufcr2_uafr2;
+ u8 ulcr2; /* UART2 Line Control */
+ u8 umcr2; /* UART2 Modem Control */
+ u8 ulsr2; /* UART2 Line Status */
+ u8 umsr2; /* UART2 Modem Status */
+ u8 uscr2; /* UART2 Scratch */
+ u8 res4[8];
+ u8 udsr2; /* UART2 DMA Status */
+ u8 res5[2543];
+} ccsr_duart_t;
+#else /* MPC8560 uses UART on its CPM */
+typedef struct ccsr_duart {
+ u8 res[4096];
+} ccsr_duart_t;
+#endif
+
+/* eSPI Registers */
+typedef struct ccsr_espi {
+ u32 mode; /* eSPI mode */
+ u32 event; /* eSPI event */
+ u32 mask; /* eSPI mask */
+ u32 com; /* eSPI command */
+ u32 tx; /* eSPI transmit FIFO access */
+ u32 rx; /* eSPI receive FIFO access */
+ u8 res1[8]; /* reserved */
+ u32 csmode[4]; /* 0x2c: sSPI CS0/1/2/3 mode */
+ u8 res2[4048]; /* fill up to 0x1000 */
+} ccsr_espi_t;
+
+/* PCI Registers */
+typedef struct ccsr_pcix {
+ u32 cfg_addr; /* PCIX Configuration Addr */
+ u32 cfg_data; /* PCIX Configuration Data */
+ u32 int_ack; /* PCIX IRQ Acknowledge */
+ u8 res1[3060];
+ u32 potar0; /* PCIX Outbound Transaction Addr 0 */
+ u32 potear0; /* PCIX Outbound Translation Extended Addr 0 */
+ u32 powbar0; /* PCIX Outbound Window Base Addr 0 */
+ u32 powbear0; /* PCIX Outbound Window Base Extended Addr 0 */
+ u32 powar0; /* PCIX Outbound Window Attrs 0 */
+ u8 res2[12];
+ u32 potar1; /* PCIX Outbound Transaction Addr 1 */
+ u32 potear1; /* PCIX Outbound Translation Extended Addr 1 */
+ u32 powbar1; /* PCIX Outbound Window Base Addr 1 */
+ u32 powbear1; /* PCIX Outbound Window Base Extended Addr 1 */
+ u32 powar1; /* PCIX Outbound Window Attrs 1 */
+ u8 res3[12];
+ u32 potar2; /* PCIX Outbound Transaction Addr 2 */
+ u32 potear2; /* PCIX Outbound Translation Extended Addr 2 */
+ u32 powbar2; /* PCIX Outbound Window Base Addr 2 */
+ u32 powbear2; /* PCIX Outbound Window Base Extended Addr 2 */
+ u32 powar2; /* PCIX Outbound Window Attrs 2 */
+ u8 res4[12];
+ u32 potar3; /* PCIX Outbound Transaction Addr 3 */
+ u32 potear3; /* PCIX Outbound Translation Extended Addr 3 */
+ u32 powbar3; /* PCIX Outbound Window Base Addr 3 */
+ u32 powbear3; /* PCIX Outbound Window Base Extended Addr 3 */
+ u32 powar3; /* PCIX Outbound Window Attrs 3 */
+ u8 res5[12];
+ u32 potar4; /* PCIX Outbound Transaction Addr 4 */
+ u32 potear4; /* PCIX Outbound Translation Extended Addr 4 */
+ u32 powbar4; /* PCIX Outbound Window Base Addr 4 */
+ u32 powbear4; /* PCIX Outbound Window Base Extended Addr 4 */
+ u32 powar4; /* PCIX Outbound Window Attrs 4 */
+ u8 res6[268];
+ u32 pitar3; /* PCIX Inbound Translation Addr 3 */
+ u32 pitear3; /* PCIX Inbound Translation Extended Addr 3 */
+ u32 piwbar3; /* PCIX Inbound Window Base Addr 3 */
+ u32 piwbear3; /* PCIX Inbound Window Base Extended Addr 3 */
+ u32 piwar3; /* PCIX Inbound Window Attrs 3 */
+ u8 res7[12];
+ u32 pitar2; /* PCIX Inbound Translation Addr 2 */
+ u32 pitear2; /* PCIX Inbound Translation Extended Addr 2 */
+ u32 piwbar2; /* PCIX Inbound Window Base Addr 2 */
+ u32 piwbear2; /* PCIX Inbound Window Base Extended Addr 2 */
+ u32 piwar2; /* PCIX Inbound Window Attrs 2 */
+ u8 res8[12];
+ u32 pitar1; /* PCIX Inbound Translation Addr 1 */
+ u32 pitear1; /* PCIX Inbound Translation Extended Addr 1 */
+ u32 piwbar1; /* PCIX Inbound Window Base Addr 1 */
+ u8 res9[4];
+ u32 piwar1; /* PCIX Inbound Window Attrs 1 */
+ u8 res10[12];
+ u32 pedr; /* PCIX Error Detect */
+ u32 pecdr; /* PCIX Error Capture Disable */
+ u32 peer; /* PCIX Error Enable */
+ u32 peattrcr; /* PCIX Error Attrs Capture */
+ u32 peaddrcr; /* PCIX Error Addr Capture */
+ u32 peextaddrcr; /* PCIX Error Extended Addr Capture */
+ u32 pedlcr; /* PCIX Error Data Low Capture */
+ u32 pedhcr; /* PCIX Error Error Data High Capture */
+ u32 gas_timr; /* PCIX Gasket Timer */
+ u8 res11[476];
+} ccsr_pcix_t;
+
+#define PCIX_COMMAND 0x62
+#define POWAR_EN 0x80000000
+#define POWAR_IO_READ 0x00080000
+#define POWAR_MEM_READ 0x00040000
+#define POWAR_IO_WRITE 0x00008000
+#define POWAR_MEM_WRITE 0x00004000
+#define POWAR_MEM_512M 0x0000001c
+#define POWAR_IO_1M 0x00000013
+
+#define PIWAR_EN 0x80000000
+#define PIWAR_PF 0x20000000
+#define PIWAR_LOCAL 0x00f00000
+#define PIWAR_READ_SNOOP 0x00050000
+#define PIWAR_WRITE_SNOOP 0x00005000
+#define PIWAR_MEM_2G 0x0000001e
+
+typedef struct ccsr_gpio {
+ u32 gpdir;
+ u32 gpodr;
+ u32 gpdat;
+ u32 gpier;
+ u32 gpimr;
+ u32 gpicr;
+} ccsr_gpio_t;
+
+/* L2 Cache Registers */
+typedef struct ccsr_l2cache {
+ u32 l2ctl; /* L2 configuration 0 */
+ u8 res1[12];
+ u32 l2cewar0; /* L2 cache external write addr 0 */
+ u8 res2[4];
+ u32 l2cewcr0; /* L2 cache external write control 0 */
+ u8 res3[4];
+ u32 l2cewar1; /* L2 cache external write addr 1 */
+ u8 res4[4];
+ u32 l2cewcr1; /* L2 cache external write control 1 */
+ u8 res5[4];
+ u32 l2cewar2; /* L2 cache external write addr 2 */
+ u8 res6[4];
+ u32 l2cewcr2; /* L2 cache external write control 2 */
+ u8 res7[4];
+ u32 l2cewar3; /* L2 cache external write addr 3 */
+ u8 res8[4];
+ u32 l2cewcr3; /* L2 cache external write control 3 */
+ u8 res9[180];
+ u32 l2srbar0; /* L2 memory-mapped SRAM base addr 0 */
+ u8 res10[4];
+ u32 l2srbar1; /* L2 memory-mapped SRAM base addr 1 */
+ u8 res11[3316];
+ u32 l2errinjhi; /* L2 error injection mask high */
+ u32 l2errinjlo; /* L2 error injection mask low */
+ u32 l2errinjctl; /* L2 error injection tag/ECC control */
+ u8 res12[20];
+ u32 l2captdatahi; /* L2 error data high capture */
+ u32 l2captdatalo; /* L2 error data low capture */
+ u32 l2captecc; /* L2 error ECC capture */
+ u8 res13[20];
+ u32 l2errdet; /* L2 error detect */
+ u32 l2errdis; /* L2 error disable */
+ u32 l2errinten; /* L2 error interrupt enable */
+ u32 l2errattr; /* L2 error attributes capture */
+ u32 l2erraddr; /* L2 error addr capture */
+ u8 res14[4];
+ u32 l2errctl; /* L2 error control */
+ u8 res15[420];
+} ccsr_l2cache_t;
+
+#define MPC85xx_L2CTL_L2E 0x80000000
+#define MPC85xx_L2CTL_L2SRAM_ENTIRE 0x00010000
+#define MPC85xx_L2ERRDIS_MBECC 0x00000008
+#define MPC85xx_L2ERRDIS_SBECC 0x00000004
+
+/* DMA Registers */
+typedef struct ccsr_dma {
+ u8 res1[256];
+ struct fsl_dma dma[4];
+ u32 dgsr; /* DMA General Status */
+ u8 res2[11516];
+} ccsr_dma_t;
+
+/* tsec */
+typedef struct ccsr_tsec {
+ u8 res1[16];
+ u32 ievent; /* IRQ Event */
+ u32 imask; /* IRQ Mask */
+ u32 edis; /* Error Disabled */
+ u8 res2[4];
+ u32 ecntrl; /* Ethernet Control */
+ u32 minflr; /* Minimum Frame Len */
+ u32 ptv; /* Pause Time Value */
+ u32 dmactrl; /* DMA Control */
+ u32 tbipa; /* TBI PHY Addr */
+ u8 res3[88];
+ u32 fifo_tx_thr; /* FIFO transmit threshold */
+ u8 res4[8];
+ u32 fifo_tx_starve; /* FIFO transmit starve */
+ u32 fifo_tx_starve_shutoff; /* FIFO transmit starve shutoff */
+ u8 res5[96];
+ u32 tctrl; /* TX Control */
+ u32 tstat; /* TX Status */
+ u8 res6[4];
+ u32 tbdlen; /* TX Buffer Desc Data Len */
+ u8 res7[16];
+ u32 ctbptrh; /* Current TX Buffer Desc Ptr High */
+ u32 ctbptr; /* Current TX Buffer Desc Ptr */
+ u8 res8[88];
+ u32 tbptrh; /* TX Buffer Desc Ptr High */
+ u32 tbptr; /* TX Buffer Desc Ptr Low */
+ u8 res9[120];
+ u32 tbaseh; /* TX Desc Base Addr High */
+ u32 tbase; /* TX Desc Base Addr */
+ u8 res10[168];
+ u32 ostbd; /* Out-of-Sequence(OOS) TX Buffer Desc */
+ u32 ostbdp; /* OOS TX Data Buffer Ptr */
+ u32 os32tbdp; /* OOS 32 Bytes TX Data Buffer Ptr Low */
+ u32 os32iptrh; /* OOS 32 Bytes TX Insert Ptr High */
+ u32 os32iptrl; /* OOS 32 Bytes TX Insert Ptr Low */
+ u32 os32tbdr; /* OOS 32 Bytes TX Reserved */
+ u32 os32iil; /* OOS 32 Bytes TX Insert Idx/Len */
+ u8 res11[52];
+ u32 rctrl; /* RX Control */
+ u32 rstat; /* RX Status */
+ u8 res12[4];
+ u32 rbdlen; /* RxBD Data Len */
+ u8 res13[16];
+ u32 crbptrh; /* Current RX Buffer Desc Ptr High */
+ u32 crbptr; /* Current RX Buffer Desc Ptr */
+ u8 res14[24];
+ u32 mrblr; /* Maximum RX Buffer Len */
+ u32 mrblr2r3; /* Maximum RX Buffer Len R2R3 */
+ u8 res15[56];
+ u32 rbptrh; /* RX Buffer Desc Ptr High 0 */
+ u32 rbptr; /* RX Buffer Desc Ptr */
+ u32 rbptrh1; /* RX Buffer Desc Ptr High 1 */
+ u32 rbptrl1; /* RX Buffer Desc Ptr Low 1 */
+ u32 rbptrh2; /* RX Buffer Desc Ptr High 2 */
+ u32 rbptrl2; /* RX Buffer Desc Ptr Low 2 */
+ u32 rbptrh3; /* RX Buffer Desc Ptr High 3 */
+ u32 rbptrl3; /* RX Buffer Desc Ptr Low 3 */
+ u8 res16[96];
+ u32 rbaseh; /* RX Desc Base Addr High 0 */
+ u32 rbase; /* RX Desc Base Addr */
+ u32 rbaseh1; /* RX Desc Base Addr High 1 */
+ u32 rbasel1; /* RX Desc Base Addr Low 1 */
+ u32 rbaseh2; /* RX Desc Base Addr High 2 */
+ u32 rbasel2; /* RX Desc Base Addr Low 2 */
+ u32 rbaseh3; /* RX Desc Base Addr High 3 */
+ u32 rbasel3; /* RX Desc Base Addr Low 3 */
+ u8 res17[224];
+ u32 maccfg1; /* MAC Configuration 1 */
+ u32 maccfg2; /* MAC Configuration 2 */
+ u32 ipgifg; /* Inter Packet Gap/Inter Frame Gap */
+ u32 hafdup; /* Half Duplex */
+ u32 maxfrm; /* Maximum Frame Len */
+ u8 res18[12];
+ u32 miimcfg; /* MII Management Configuration */
+ u32 miimcom; /* MII Management Cmd */
+ u32 miimadd; /* MII Management Addr */
+ u32 miimcon; /* MII Management Control */
+ u32 miimstat; /* MII Management Status */
+ u32 miimind; /* MII Management Indicator */
+ u8 res19[4];
+ u32 ifstat; /* Interface Status */
+ u32 macstnaddr1; /* Station Addr Part 1 */
+ u32 macstnaddr2; /* Station Addr Part 2 */
+ u8 res20[312];
+ u32 tr64; /* TX & RX 64-byte Frame Counter */
+ u32 tr127; /* TX & RX 65-127 byte Frame Counter */
+ u32 tr255; /* TX & RX 128-255 byte Frame Counter */
+ u32 tr511; /* TX & RX 256-511 byte Frame Counter */
+ u32 tr1k; /* TX & RX 512-1023 byte Frame Counter */
+ u32 trmax; /* TX & RX 1024-1518 byte Frame Counter */
+ u32 trmgv; /* TX & RX 1519-1522 byte Good VLAN Frame */
+ u32 rbyt; /* RX Byte Counter */
+ u32 rpkt; /* RX Packet Counter */
+ u32 rfcs; /* RX FCS Error Counter */
+ u32 rmca; /* RX Multicast Packet Counter */
+ u32 rbca; /* RX Broadcast Packet Counter */
+ u32 rxcf; /* RX Control Frame Packet Counter */
+ u32 rxpf; /* RX Pause Frame Packet Counter */
+ u32 rxuo; /* RX Unknown OP Code Counter */
+ u32 raln; /* RX Alignment Error Counter */
+ u32 rflr; /* RX Frame Len Error Counter */
+ u32 rcde; /* RX Code Error Counter */
+ u32 rcse; /* RX Carrier Sense Error Counter */
+ u32 rund; /* RX Undersize Packet Counter */
+ u32 rovr; /* RX Oversize Packet Counter */
+ u32 rfrg; /* RX Fragments Counter */
+ u32 rjbr; /* RX Jabber Counter */
+ u32 rdrp; /* RX Drop Counter */
+ u32 tbyt; /* TX Byte Counter Counter */
+ u32 tpkt; /* TX Packet Counter */
+ u32 tmca; /* TX Multicast Packet Counter */
+ u32 tbca; /* TX Broadcast Packet Counter */
+ u32 txpf; /* TX Pause Control Frame Counter */
+ u32 tdfr; /* TX Deferral Packet Counter */
+ u32 tedf; /* TX Excessive Deferral Packet Counter */
+ u32 tscl; /* TX Single Collision Packet Counter */
+ u32 tmcl; /* TX Multiple Collision Packet Counter */
+ u32 tlcl; /* TX Late Collision Packet Counter */
+ u32 txcl; /* TX Excessive Collision Packet Counter */
+ u32 tncl; /* TX Total Collision Counter */
+ u8 res21[4];
+ u32 tdrp; /* TX Drop Frame Counter */
+ u32 tjbr; /* TX Jabber Frame Counter */
+ u32 tfcs; /* TX FCS Error Counter */
+ u32 txcf; /* TX Control Frame Counter */
+ u32 tovr; /* TX Oversize Frame Counter */
+ u32 tund; /* TX Undersize Frame Counter */
+ u32 tfrg; /* TX Fragments Frame Counter */
+ u32 car1; /* Carry One */
+ u32 car2; /* Carry Two */
+ u32 cam1; /* Carry Mask One */
+ u32 cam2; /* Carry Mask Two */
+ u8 res22[192];
+ u32 iaddr0; /* Indivdual addr 0 */
+ u32 iaddr1; /* Indivdual addr 1 */
+ u32 iaddr2; /* Indivdual addr 2 */
+ u32 iaddr3; /* Indivdual addr 3 */
+ u32 iaddr4; /* Indivdual addr 4 */
+ u32 iaddr5; /* Indivdual addr 5 */
+ u32 iaddr6; /* Indivdual addr 6 */
+ u32 iaddr7; /* Indivdual addr 7 */
+ u8 res23[96];
+ u32 gaddr0; /* Global addr 0 */
+ u32 gaddr1; /* Global addr 1 */
+ u32 gaddr2; /* Global addr 2 */
+ u32 gaddr3; /* Global addr 3 */
+ u32 gaddr4; /* Global addr 4 */
+ u32 gaddr5; /* Global addr 5 */
+ u32 gaddr6; /* Global addr 6 */
+ u32 gaddr7; /* Global addr 7 */
+ u8 res24[96];
+ u32 pmd0; /* Pattern Match Data */
+ u8 res25[4];
+ u32 pmask0; /* Pattern Mask */
+ u8 res26[4];
+ u32 pcntrl0; /* Pattern Match Control */
+ u8 res27[4];
+ u32 pattrb0; /* Pattern Match Attrs */
+ u32 pattrbeli0; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd1; /* Pattern Match Data */
+ u8 res28[4];
+ u32 pmask1; /* Pattern Mask */
+ u8 res29[4];
+ u32 pcntrl1; /* Pattern Match Control */
+ u8 res30[4];
+ u32 pattrb1; /* Pattern Match Attrs */
+ u32 pattrbeli1; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd2; /* Pattern Match Data */
+ u8 res31[4];
+ u32 pmask2; /* Pattern Mask */
+ u8 res32[4];
+ u32 pcntrl2; /* Pattern Match Control */
+ u8 res33[4];
+ u32 pattrb2; /* Pattern Match Attrs */
+ u32 pattrbeli2; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd3; /* Pattern Match Data */
+ u8 res34[4];
+ u32 pmask3; /* Pattern Mask */
+ u8 res35[4];
+ u32 pcntrl3; /* Pattern Match Control */
+ u8 res36[4];
+ u32 pattrb3; /* Pattern Match Attrs */
+ u32 pattrbeli3; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd4; /* Pattern Match Data */
+ u8 res37[4];
+ u32 pmask4; /* Pattern Mask */
+ u8 res38[4];
+ u32 pcntrl4; /* Pattern Match Control */
+ u8 res39[4];
+ u32 pattrb4; /* Pattern Match Attrs */
+ u32 pattrbeli4; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd5; /* Pattern Match Data */
+ u8 res40[4];
+ u32 pmask5; /* Pattern Mask */
+ u8 res41[4];
+ u32 pcntrl5; /* Pattern Match Control */
+ u8 res42[4];
+ u32 pattrb5; /* Pattern Match Attrs */
+ u32 pattrbeli5; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd6; /* Pattern Match Data */
+ u8 res43[4];
+ u32 pmask6; /* Pattern Mask */
+ u8 res44[4];
+ u32 pcntrl6; /* Pattern Match Control */
+ u8 res45[4];
+ u32 pattrb6; /* Pattern Match Attrs */
+ u32 pattrbeli6; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd7; /* Pattern Match Data */
+ u8 res46[4];
+ u32 pmask7; /* Pattern Mask */
+ u8 res47[4];
+ u32 pcntrl7; /* Pattern Match Control */
+ u8 res48[4];
+ u32 pattrb7; /* Pattern Match Attrs */
+ u32 pattrbeli7; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd8; /* Pattern Match Data */
+ u8 res49[4];
+ u32 pmask8; /* Pattern Mask */
+ u8 res50[4];
+ u32 pcntrl8; /* Pattern Match Control */
+ u8 res51[4];
+ u32 pattrb8; /* Pattern Match Attrs */
+ u32 pattrbeli8; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd9; /* Pattern Match Data */
+ u8 res52[4];
+ u32 pmask9; /* Pattern Mask */
+ u8 res53[4];
+ u32 pcntrl9; /* Pattern Match Control */
+ u8 res54[4];
+ u32 pattrb9; /* Pattern Match Attrs */
+ u32 pattrbeli9; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd10; /* Pattern Match Data */
+ u8 res55[4];
+ u32 pmask10; /* Pattern Mask */
+ u8 res56[4];
+ u32 pcntrl10; /* Pattern Match Control */
+ u8 res57[4];
+ u32 pattrb10; /* Pattern Match Attrs */
+ u32 pattrbeli10; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd11; /* Pattern Match Data */
+ u8 res58[4];
+ u32 pmask11; /* Pattern Mask */
+ u8 res59[4];
+ u32 pcntrl11; /* Pattern Match Control */
+ u8 res60[4];
+ u32 pattrb11; /* Pattern Match Attrs */
+ u32 pattrbeli11; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd12; /* Pattern Match Data */
+ u8 res61[4];
+ u32 pmask12; /* Pattern Mask */
+ u8 res62[4];
+ u32 pcntrl12; /* Pattern Match Control */
+ u8 res63[4];
+ u32 pattrb12; /* Pattern Match Attrs */
+ u32 pattrbeli12; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd13; /* Pattern Match Data */
+ u8 res64[4];
+ u32 pmask13; /* Pattern Mask */
+ u8 res65[4];
+ u32 pcntrl13; /* Pattern Match Control */
+ u8 res66[4];
+ u32 pattrb13; /* Pattern Match Attrs */
+ u32 pattrbeli13; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd14; /* Pattern Match Data */
+ u8 res67[4];
+ u32 pmask14; /* Pattern Mask */
+ u8 res68[4];
+ u32 pcntrl14; /* Pattern Match Control */
+ u8 res69[4];
+ u32 pattrb14; /* Pattern Match Attrs */
+ u32 pattrbeli14; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd15; /* Pattern Match Data */
+ u8 res70[4];
+ u32 pmask15; /* Pattern Mask */
+ u8 res71[4];
+ u32 pcntrl15; /* Pattern Match Control */
+ u8 res72[4];
+ u32 pattrb15; /* Pattern Match Attrs */
+ u32 pattrbeli15; /* Pattern Match Attrs Extract Len & Idx */
+ u8 res73[248];
+ u32 attr; /* Attrs */
+ u32 attreli; /* Attrs Extract Len & Idx */
+ u8 res74[1024];
+} ccsr_tsec_t;
+
+/* PIC Registers */
+typedef struct ccsr_pic {
+ u8 res1[64];
+ u32 ipidr0; /* Interprocessor IRQ Dispatch 0 */
+ u8 res2[12];
+ u32 ipidr1; /* Interprocessor IRQ Dispatch 1 */
+ u8 res3[12];
+ u32 ipidr2; /* Interprocessor IRQ Dispatch 2 */
+ u8 res4[12];
+ u32 ipidr3; /* Interprocessor IRQ Dispatch 3 */
+ u8 res5[12];
+ u32 ctpr; /* Current Task Priority */
+ u8 res6[12];
+ u32 whoami; /* Who Am I */
+ u8 res7[12];
+ u32 iack; /* IRQ Acknowledge */
+ u8 res8[12];
+ u32 eoi; /* End Of IRQ */
+ u8 res9[3916];
+ u32 frr; /* Feature Reporting */
+ u8 res10[28];
+ u32 gcr; /* Global Configuration */
+#define MPC85xx_PICGCR_RST 0x80000000
+#define MPC85xx_PICGCR_M 0x20000000
+ u8 res11[92];
+ u32 vir; /* Vendor Identification */
+ u8 res12[12];
+ u32 pir; /* Processor Initialization */
+ u8 res13[12];
+ u32 ipivpr0; /* IPI Vector/Priority 0 */
+ u8 res14[12];
+ u32 ipivpr1; /* IPI Vector/Priority 1 */
+ u8 res15[12];
+ u32 ipivpr2; /* IPI Vector/Priority 2 */
+ u8 res16[12];
+ u32 ipivpr3; /* IPI Vector/Priority 3 */
+ u8 res17[12];
+ u32 svr; /* Spurious Vector */
+ u8 res18[12];
+ u32 tfrr; /* Timer Frequency Reporting */
+ u8 res19[12];
+ u32 gtccr0; /* Global Timer Current Count 0 */
+ u8 res20[12];
+ u32 gtbcr0; /* Global Timer Base Count 0 */
+ u8 res21[12];
+ u32 gtvpr0; /* Global Timer Vector/Priority 0 */
+ u8 res22[12];
+ u32 gtdr0; /* Global Timer Destination 0 */
+ u8 res23[12];
+ u32 gtccr1; /* Global Timer Current Count 1 */
+ u8 res24[12];
+ u32 gtbcr1; /* Global Timer Base Count 1 */
+ u8 res25[12];
+ u32 gtvpr1; /* Global Timer Vector/Priority 1 */
+ u8 res26[12];
+ u32 gtdr1; /* Global Timer Destination 1 */
+ u8 res27[12];
+ u32 gtccr2; /* Global Timer Current Count 2 */
+ u8 res28[12];
+ u32 gtbcr2; /* Global Timer Base Count 2 */
+ u8 res29[12];
+ u32 gtvpr2; /* Global Timer Vector/Priority 2 */
+ u8 res30[12];
+ u32 gtdr2; /* Global Timer Destination 2 */
+ u8 res31[12];
+ u32 gtccr3; /* Global Timer Current Count 3 */
+ u8 res32[12];
+ u32 gtbcr3; /* Global Timer Base Count 3 */
+ u8 res33[12];
+ u32 gtvpr3; /* Global Timer Vector/Priority 3 */
+ u8 res34[12];
+ u32 gtdr3; /* Global Timer Destination 3 */
+ u8 res35[268];
+ u32 tcr; /* Timer Control */
+ u8 res36[12];
+ u32 irqsr0; /* IRQ_OUT Summary 0 */
+ u8 res37[12];
+ u32 irqsr1; /* IRQ_OUT Summary 1 */
+ u8 res38[12];
+ u32 cisr0; /* Critical IRQ Summary 0 */
+ u8 res39[12];
+ u32 cisr1; /* Critical IRQ Summary 1 */
+ u8 res40[188];
+ u32 msgr0; /* Message 0 */
+ u8 res41[12];
+ u32 msgr1; /* Message 1 */
+ u8 res42[12];
+ u32 msgr2; /* Message 2 */
+ u8 res43[12];
+ u32 msgr3; /* Message 3 */
+ u8 res44[204];
+ u32 mer; /* Message Enable */
+ u8 res45[12];
+ u32 msr; /* Message Status */
+ u8 res46[60140];
+ u32 eivpr0; /* External IRQ Vector/Priority 0 */
+ u8 res47[12];
+ u32 eidr0; /* External IRQ Destination 0 */
+ u8 res48[12];
+ u32 eivpr1; /* External IRQ Vector/Priority 1 */
+ u8 res49[12];
+ u32 eidr1; /* External IRQ Destination 1 */
+ u8 res50[12];
+ u32 eivpr2; /* External IRQ Vector/Priority 2 */
+ u8 res51[12];
+ u32 eidr2; /* External IRQ Destination 2 */
+ u8 res52[12];
+ u32 eivpr3; /* External IRQ Vector/Priority 3 */
+ u8 res53[12];
+ u32 eidr3; /* External IRQ Destination 3 */
+ u8 res54[12];
+ u32 eivpr4; /* External IRQ Vector/Priority 4 */
+ u8 res55[12];
+ u32 eidr4; /* External IRQ Destination 4 */
+ u8 res56[12];
+ u32 eivpr5; /* External IRQ Vector/Priority 5 */
+ u8 res57[12];
+ u32 eidr5; /* External IRQ Destination 5 */
+ u8 res58[12];
+ u32 eivpr6; /* External IRQ Vector/Priority 6 */
+ u8 res59[12];
+ u32 eidr6; /* External IRQ Destination 6 */
+ u8 res60[12];
+ u32 eivpr7; /* External IRQ Vector/Priority 7 */
+ u8 res61[12];
+ u32 eidr7; /* External IRQ Destination 7 */
+ u8 res62[12];
+ u32 eivpr8; /* External IRQ Vector/Priority 8 */
+ u8 res63[12];
+ u32 eidr8; /* External IRQ Destination 8 */
+ u8 res64[12];
+ u32 eivpr9; /* External IRQ Vector/Priority 9 */
+ u8 res65[12];
+ u32 eidr9; /* External IRQ Destination 9 */
+ u8 res66[12];
+ u32 eivpr10; /* External IRQ Vector/Priority 10 */
+ u8 res67[12];
+ u32 eidr10; /* External IRQ Destination 10 */
+ u8 res68[12];
+ u32 eivpr11; /* External IRQ Vector/Priority 11 */
+ u8 res69[12];
+ u32 eidr11; /* External IRQ Destination 11 */
+ u8 res70[140];
+ u32 iivpr0; /* Internal IRQ Vector/Priority 0 */
+ u8 res71[12];
+ u32 iidr0; /* Internal IRQ Destination 0 */
+ u8 res72[12];
+ u32 iivpr1; /* Internal IRQ Vector/Priority 1 */
+ u8 res73[12];
+ u32 iidr1; /* Internal IRQ Destination 1 */
+ u8 res74[12];
+ u32 iivpr2; /* Internal IRQ Vector/Priority 2 */
+ u8 res75[12];
+ u32 iidr2; /* Internal IRQ Destination 2 */
+ u8 res76[12];
+ u32 iivpr3; /* Internal IRQ Vector/Priority 3 */
+ u8 res77[12];
+ u32 iidr3; /* Internal IRQ Destination 3 */
+ u8 res78[12];
+ u32 iivpr4; /* Internal IRQ Vector/Priority 4 */
+ u8 res79[12];
+ u32 iidr4; /* Internal IRQ Destination 4 */
+ u8 res80[12];
+ u32 iivpr5; /* Internal IRQ Vector/Priority 5 */
+ u8 res81[12];
+ u32 iidr5; /* Internal IRQ Destination 5 */
+ u8 res82[12];
+ u32 iivpr6; /* Internal IRQ Vector/Priority 6 */
+ u8 res83[12];
+ u32 iidr6; /* Internal IRQ Destination 6 */
+ u8 res84[12];
+ u32 iivpr7; /* Internal IRQ Vector/Priority 7 */
+ u8 res85[12];
+ u32 iidr7; /* Internal IRQ Destination 7 */
+ u8 res86[12];
+ u32 iivpr8; /* Internal IRQ Vector/Priority 8 */
+ u8 res87[12];
+ u32 iidr8; /* Internal IRQ Destination 8 */
+ u8 res88[12];
+ u32 iivpr9; /* Internal IRQ Vector/Priority 9 */
+ u8 res89[12];
+ u32 iidr9; /* Internal IRQ Destination 9 */
+ u8 res90[12];
+ u32 iivpr10; /* Internal IRQ Vector/Priority 10 */
+ u8 res91[12];
+ u32 iidr10; /* Internal IRQ Destination 10 */
+ u8 res92[12];
+ u32 iivpr11; /* Internal IRQ Vector/Priority 11 */
+ u8 res93[12];
+ u32 iidr11; /* Internal IRQ Destination 11 */
+ u8 res94[12];
+ u32 iivpr12; /* Internal IRQ Vector/Priority 12 */
+ u8 res95[12];
+ u32 iidr12; /* Internal IRQ Destination 12 */
+ u8 res96[12];
+ u32 iivpr13; /* Internal IRQ Vector/Priority 13 */
+ u8 res97[12];
+ u32 iidr13; /* Internal IRQ Destination 13 */
+ u8 res98[12];
+ u32 iivpr14; /* Internal IRQ Vector/Priority 14 */
+ u8 res99[12];
+ u32 iidr14; /* Internal IRQ Destination 14 */
+ u8 res100[12];
+ u32 iivpr15; /* Internal IRQ Vector/Priority 15 */
+ u8 res101[12];
+ u32 iidr15; /* Internal IRQ Destination 15 */
+ u8 res102[12];
+ u32 iivpr16; /* Internal IRQ Vector/Priority 16 */
+ u8 res103[12];
+ u32 iidr16; /* Internal IRQ Destination 16 */
+ u8 res104[12];
+ u32 iivpr17; /* Internal IRQ Vector/Priority 17 */
+ u8 res105[12];
+ u32 iidr17; /* Internal IRQ Destination 17 */
+ u8 res106[12];
+ u32 iivpr18; /* Internal IRQ Vector/Priority 18 */
+ u8 res107[12];
+ u32 iidr18; /* Internal IRQ Destination 18 */
+ u8 res108[12];
+ u32 iivpr19; /* Internal IRQ Vector/Priority 19 */
+ u8 res109[12];
+ u32 iidr19; /* Internal IRQ Destination 19 */
+ u8 res110[12];
+ u32 iivpr20; /* Internal IRQ Vector/Priority 20 */
+ u8 res111[12];
+ u32 iidr20; /* Internal IRQ Destination 20 */
+ u8 res112[12];
+ u32 iivpr21; /* Internal IRQ Vector/Priority 21 */
+ u8 res113[12];
+ u32 iidr21; /* Internal IRQ Destination 21 */
+ u8 res114[12];
+ u32 iivpr22; /* Internal IRQ Vector/Priority 22 */
+ u8 res115[12];
+ u32 iidr22; /* Internal IRQ Destination 22 */
+ u8 res116[12];
+ u32 iivpr23; /* Internal IRQ Vector/Priority 23 */
+ u8 res117[12];
+ u32 iidr23; /* Internal IRQ Destination 23 */
+ u8 res118[12];
+ u32 iivpr24; /* Internal IRQ Vector/Priority 24 */
+ u8 res119[12];
+ u32 iidr24; /* Internal IRQ Destination 24 */
+ u8 res120[12];
+ u32 iivpr25; /* Internal IRQ Vector/Priority 25 */
+ u8 res121[12];
+ u32 iidr25; /* Internal IRQ Destination 25 */
+ u8 res122[12];
+ u32 iivpr26; /* Internal IRQ Vector/Priority 26 */
+ u8 res123[12];
+ u32 iidr26; /* Internal IRQ Destination 26 */
+ u8 res124[12];
+ u32 iivpr27; /* Internal IRQ Vector/Priority 27 */
+ u8 res125[12];
+ u32 iidr27; /* Internal IRQ Destination 27 */
+ u8 res126[12];
+ u32 iivpr28; /* Internal IRQ Vector/Priority 28 */
+ u8 res127[12];
+ u32 iidr28; /* Internal IRQ Destination 28 */
+ u8 res128[12];
+ u32 iivpr29; /* Internal IRQ Vector/Priority 29 */
+ u8 res129[12];
+ u32 iidr29; /* Internal IRQ Destination 29 */
+ u8 res130[12];
+ u32 iivpr30; /* Internal IRQ Vector/Priority 30 */
+ u8 res131[12];
+ u32 iidr30; /* Internal IRQ Destination 30 */
+ u8 res132[12];
+ u32 iivpr31; /* Internal IRQ Vector/Priority 31 */
+ u8 res133[12];
+ u32 iidr31; /* Internal IRQ Destination 31 */
+ u8 res134[4108];
+ u32 mivpr0; /* Messaging IRQ Vector/Priority 0 */
+ u8 res135[12];
+ u32 midr0; /* Messaging IRQ Destination 0 */
+ u8 res136[12];
+ u32 mivpr1; /* Messaging IRQ Vector/Priority 1 */
+ u8 res137[12];
+ u32 midr1; /* Messaging IRQ Destination 1 */
+ u8 res138[12];
+ u32 mivpr2; /* Messaging IRQ Vector/Priority 2 */
+ u8 res139[12];
+ u32 midr2; /* Messaging IRQ Destination 2 */
+ u8 res140[12];
+ u32 mivpr3; /* Messaging IRQ Vector/Priority 3 */
+ u8 res141[12];
+ u32 midr3; /* Messaging IRQ Destination 3 */
+ u8 res142[59852];
+ u32 ipi0dr0; /* Processor 0 Interprocessor IRQ Dispatch 0 */
+ u8 res143[12];
+ u32 ipi0dr1; /* Processor 0 Interprocessor IRQ Dispatch 1 */
+ u8 res144[12];
+ u32 ipi0dr2; /* Processor 0 Interprocessor IRQ Dispatch 2 */
+ u8 res145[12];
+ u32 ipi0dr3; /* Processor 0 Interprocessor IRQ Dispatch 3 */
+ u8 res146[12];
+ u32 ctpr0; /* Current Task Priority for Processor 0 */
+ u8 res147[12];
+ u32 whoami0; /* Who Am I for Processor 0 */
+ u8 res148[12];
+ u32 iack0; /* IRQ Acknowledge for Processor 0 */
+ u8 res149[12];
+ u32 eoi0; /* End Of IRQ for Processor 0 */
+ u8 res150[130892];
+} ccsr_pic_t;
+
+/* CPM Block */
+#ifndef CONFIG_CPM2
+typedef struct ccsr_cpm {
+ u8 res[262144];
+} ccsr_cpm_t;
+#else
+/*
+ * DPARM
+ * General SIU
+ */
+typedef struct ccsr_cpm_siu {
+ u8 res1[80];
+ u32 smaer;
+ u32 smser;
+ u32 smevr;
+ u8 res2[4];
+ u32 lmaer;
+ u32 lmser;
+ u32 lmevr;
+ u8 res3[2964];
+} ccsr_cpm_siu_t;
+
+/* IRQ Controller */
+typedef struct ccsr_cpm_intctl {
+ u16 sicr;
+ u8 res1[2];
+ u32 sivec;
+ u32 sipnrh;
+ u32 sipnrl;
+ u32 siprr;
+ u32 scprrh;
+ u32 scprrl;
+ u32 simrh;
+ u32 simrl;
+ u32 siexr;
+ u8 res2[88];
+ u32 sccr;
+ u8 res3[124];
+} ccsr_cpm_intctl_t;
+
+/* input/output port */
+typedef struct ccsr_cpm_iop {
+ u32 pdira;
+ u32 ppara;
+ u32 psora;
+ u32 podra;
+ u32 pdata;
+ u8 res1[12];
+ u32 pdirb;
+ u32 pparb;
+ u32 psorb;
+ u32 podrb;
+ u32 pdatb;
+ u8 res2[12];
+ u32 pdirc;
+ u32 pparc;
+ u32 psorc;
+ u32 podrc;
+ u32 pdatc;
+ u8 res3[12];
+ u32 pdird;
+ u32 ppard;
+ u32 psord;
+ u32 podrd;
+ u32 pdatd;
+ u8 res4[12];
+} ccsr_cpm_iop_t;
+
+/* CPM timers */
+typedef struct ccsr_cpm_timer {
+ u8 tgcr1;
+ u8 res1[3];
+ u8 tgcr2;
+ u8 res2[11];
+ u16 tmr1;
+ u16 tmr2;
+ u16 trr1;
+ u16 trr2;
+ u16 tcr1;
+ u16 tcr2;
+ u16 tcn1;
+ u16 tcn2;
+ u16 tmr3;
+ u16 tmr4;
+ u16 trr3;
+ u16 trr4;
+ u16 tcr3;
+ u16 tcr4;
+ u16 tcn3;
+ u16 tcn4;
+ u16 ter1;
+ u16 ter2;
+ u16 ter3;
+ u16 ter4;
+ u8 res3[608];
+} ccsr_cpm_timer_t;
+
+/* SDMA */
+typedef struct ccsr_cpm_sdma {
+ u8 sdsr;
+ u8 res1[3];
+ u8 sdmr;
+ u8 res2[739];
+} ccsr_cpm_sdma_t;
+
+/* FCC1 */
+typedef struct ccsr_cpm_fcc1 {
+ u32 gfmr;
+ u32 fpsmr;
+ u16 ftodr;
+ u8 res1[2];
+ u16 fdsr;
+ u8 res2[2];
+ u16 fcce;
+ u8 res3[2];
+ u16 fccm;
+ u8 res4[2];
+ u8 fccs;
+ u8 res5[3];
+ u8 ftirr_phy[4];
+} ccsr_cpm_fcc1_t;
+
+/* FCC2 */
+typedef struct ccsr_cpm_fcc2 {
+ u32 gfmr;
+ u32 fpsmr;
+ u16 ftodr;
+ u8 res1[2];
+ u16 fdsr;
+ u8 res2[2];
+ u16 fcce;
+ u8 res3[2];
+ u16 fccm;
+ u8 res4[2];
+ u8 fccs;
+ u8 res5[3];
+ u8 ftirr_phy[4];
+} ccsr_cpm_fcc2_t;
+
+/* FCC3 */
+typedef struct ccsr_cpm_fcc3 {
+ u32 gfmr;
+ u32 fpsmr;
+ u16 ftodr;
+ u8 res1[2];
+ u16 fdsr;
+ u8 res2[2];
+ u16 fcce;
+ u8 res3[2];
+ u16 fccm;
+ u8 res4[2];
+ u8 fccs;
+ u8 res5[3];
+ u8 res[36];
+} ccsr_cpm_fcc3_t;
+
+/* FCC1 extended */
+typedef struct ccsr_cpm_fcc1_ext {
+ u32 firper;
+ u32 firer;
+ u32 firsr_h;
+ u32 firsr_l;
+ u8 gfemr;
+ u8 res[15];
+
+} ccsr_cpm_fcc1_ext_t;
+
+/* FCC2 extended */
+typedef struct ccsr_cpm_fcc2_ext {
+ u32 firper;
+ u32 firer;
+ u32 firsr_h;
+ u32 firsr_l;
+ u8 gfemr;
+ u8 res[31];
+} ccsr_cpm_fcc2_ext_t;
+
+/* FCC3 extended */
+typedef struct ccsr_cpm_fcc3_ext {
+ u8 gfemr;
+ u8 res[47];
+} ccsr_cpm_fcc3_ext_t;
+
+/* TC layers */
+typedef struct ccsr_cpm_tmp1 {
+ u8 res[496];
+} ccsr_cpm_tmp1_t;
+
+/* BRGs:5,6,7,8 */
+typedef struct ccsr_cpm_brg2 {
+ u32 brgc5;
+ u32 brgc6;
+ u32 brgc7;
+ u32 brgc8;
+ u8 res[608];
+} ccsr_cpm_brg2_t;
+
+/* I2C */
+typedef struct ccsr_cpm_i2c {
+ u8 i2mod;
+ u8 res1[3];
+ u8 i2add;
+ u8 res2[3];
+ u8 i2brg;
+ u8 res3[3];
+ u8 i2com;
+ u8 res4[3];
+ u8 i2cer;
+ u8 res5[3];
+ u8 i2cmr;
+ u8 res6[331];
+} ccsr_cpm_i2c_t;
+
+/* CPM core */
+typedef struct ccsr_cpm_cp {
+ u32 cpcr;
+ u32 rccr;
+ u8 res1[14];
+ u16 rter;
+ u8 res2[2];
+ u16 rtmr;
+ u16 rtscr;
+ u8 res3[2];
+ u32 rtsr;
+ u8 res4[12];
+} ccsr_cpm_cp_t;
+
+/* BRGs:1,2,3,4 */
+typedef struct ccsr_cpm_brg1 {
+ u32 brgc1;
+ u32 brgc2;
+ u32 brgc3;
+ u32 brgc4;
+} ccsr_cpm_brg1_t;
+
+/* SCC1-SCC4 */
+typedef struct ccsr_cpm_scc {
+ u32 gsmrl;
+ u32 gsmrh;
+ u16 psmr;
+ u8 res1[2];
+ u16 todr;
+ u16 dsr;
+ u16 scce;
+ u8 res2[2];
+ u16 sccm;
+ u8 res3;
+ u8 sccs;
+ u8 res4[8];
+} ccsr_cpm_scc_t;
+
+typedef struct ccsr_cpm_tmp2 {
+ u8 res[32];
+} ccsr_cpm_tmp2_t;
+
+/* SPI */
+typedef struct ccsr_cpm_spi {
+ u16 spmode;
+ u8 res1[4];
+ u8 spie;
+ u8 res2[3];
+ u8 spim;
+ u8 res3[2];
+ u8 spcom;
+ u8 res4[82];
+} ccsr_cpm_spi_t;
+
+/* CPM MUX */
+typedef struct ccsr_cpm_mux {
+ u8 cmxsi1cr;
+ u8 res1;
+ u8 cmxsi2cr;
+ u8 res2;
+ u32 cmxfcr;
+ u32 cmxscr;
+ u8 res3[2];
+ u16 cmxuar;
+ u8 res4[16];
+} ccsr_cpm_mux_t;
+
+/* SI,MCC,etc */
+typedef struct ccsr_cpm_tmp3 {
+ u8 res[58592];
+} ccsr_cpm_tmp3_t;
+
+typedef struct ccsr_cpm_iram {
+ u32 iram[8192];
+ u8 res[98304];
+} ccsr_cpm_iram_t;
+
+typedef struct ccsr_cpm {
+ /* Some references are into the unique & known dpram spaces,
+ * others are from the generic base.
+ */
+#define im_dprambase im_dpram1
+ u8 im_dpram1[16*1024];
+ u8 res1[16*1024];
+ u8 im_dpram2[16*1024];
+ u8 res2[16*1024];
+ ccsr_cpm_siu_t im_cpm_siu; /* SIU Configuration */
+ ccsr_cpm_intctl_t im_cpm_intctl; /* IRQ Controller */
+ ccsr_cpm_iop_t im_cpm_iop; /* IO Port control/status */
+ ccsr_cpm_timer_t im_cpm_timer; /* CPM timers */
+ ccsr_cpm_sdma_t im_cpm_sdma; /* SDMA control/status */
+ ccsr_cpm_fcc1_t im_cpm_fcc1;
+ ccsr_cpm_fcc2_t im_cpm_fcc2;
+ ccsr_cpm_fcc3_t im_cpm_fcc3;
+ ccsr_cpm_fcc1_ext_t im_cpm_fcc1_ext;
+ ccsr_cpm_fcc2_ext_t im_cpm_fcc2_ext;
+ ccsr_cpm_fcc3_ext_t im_cpm_fcc3_ext;
+ ccsr_cpm_tmp1_t im_cpm_tmp1;
+ ccsr_cpm_brg2_t im_cpm_brg2;
+ ccsr_cpm_i2c_t im_cpm_i2c;
+ ccsr_cpm_cp_t im_cpm_cp;
+ ccsr_cpm_brg1_t im_cpm_brg1;
+ ccsr_cpm_scc_t im_cpm_scc[4];
+ ccsr_cpm_tmp2_t im_cpm_tmp2;
+ ccsr_cpm_spi_t im_cpm_spi;
+ ccsr_cpm_mux_t im_cpm_mux;
+ ccsr_cpm_tmp3_t im_cpm_tmp3;
+ ccsr_cpm_iram_t im_cpm_iram;
+} ccsr_cpm_t;
+#endif
+
+/* RapidIO Registers */
+typedef struct ccsr_rio {
+ u32 didcar; /* Device Identity Capability */
+ u32 dicar; /* Device Information Capability */
+ u32 aidcar; /* Assembly Identity Capability */
+ u32 aicar; /* Assembly Information Capability */
+ u32 pefcar; /* Processing Element Features Capability */
+ u32 spicar; /* Switch Port Information Capability */
+ u32 socar; /* Source Operations Capability */
+ u32 docar; /* Destination Operations Capability */
+ u8 res1[32];
+ u32 msr; /* Mailbox Cmd And Status */
+ u32 pwdcsr; /* Port-Write & Doorbell Cmd And Status */
+ u8 res2[4];
+ u32 pellccsr; /* Processing Element Logic Layer CCSR */
+ u8 res3[12];
+ u32 lcsbacsr; /* Local Cfg Space Base Addr Cmd & Status */
+ u32 bdidcsr; /* Base Device ID Cmd & Status */
+ u8 res4[4];
+ u32 hbdidlcsr; /* Host Base Device ID Lock Cmd & Status */
+ u32 ctcsr; /* Component Tag Cmd & Status */
+ u8 res5[144];
+ u32 pmbh0csr; /* Port Maint. Block Hdr 0 Cmd & Status */
+ u8 res6[28];
+ u32 pltoccsr; /* Port Link Time-out Ctrl Cmd & Status */
+ u32 prtoccsr; /* Port Response Time-out Ctrl Cmd & Status */
+ u8 res7[20];
+ u32 pgccsr; /* Port General Cmd & Status */
+ u32 plmreqcsr; /* Port Link Maint. Request Cmd & Status */
+ u32 plmrespcsr; /* Port Link Maint. Response Cmd & Status */
+ u32 plascsr; /* Port Local Ackid Status Cmd & Status */
+ u8 res8[12];
+ u32 pescsr; /* Port Error & Status Cmd & Status */
+ u32 pccsr; /* Port Control Cmd & Status */
+ u8 res9[65184];
+ u32 cr; /* Port Control Cmd & Status */
+ u8 res10[12];
+ u32 pcr; /* Port Configuration */
+ u32 peir; /* Port Error Injection */
+ u8 res11[3048];
+ u32 rowtar0; /* RIO Outbound Window Translation Addr 0 */
+ u8 res12[12];
+ u32 rowar0; /* RIO Outbound Attrs 0 */
+ u8 res13[12];
+ u32 rowtar1; /* RIO Outbound Window Translation Addr 1 */
+ u8 res14[4];
+ u32 rowbar1; /* RIO Outbound Window Base Addr 1 */
+ u8 res15[4];
+ u32 rowar1; /* RIO Outbound Attrs 1 */
+ u8 res16[12];
+ u32 rowtar2; /* RIO Outbound Window Translation Addr 2 */
+ u8 res17[4];
+ u32 rowbar2; /* RIO Outbound Window Base Addr 2 */
+ u8 res18[4];
+ u32 rowar2; /* RIO Outbound Attrs 2 */
+ u8 res19[12];
+ u32 rowtar3; /* RIO Outbound Window Translation Addr 3 */
+ u8 res20[4];
+ u32 rowbar3; /* RIO Outbound Window Base Addr 3 */
+ u8 res21[4];
+ u32 rowar3; /* RIO Outbound Attrs 3 */
+ u8 res22[12];
+ u32 rowtar4; /* RIO Outbound Window Translation Addr 4 */
+ u8 res23[4];
+ u32 rowbar4; /* RIO Outbound Window Base Addr 4 */
+ u8 res24[4];
+ u32 rowar4; /* RIO Outbound Attrs 4 */
+ u8 res25[12];
+ u32 rowtar5; /* RIO Outbound Window Translation Addr 5 */
+ u8 res26[4];
+ u32 rowbar5; /* RIO Outbound Window Base Addr 5 */
+ u8 res27[4];
+ u32 rowar5; /* RIO Outbound Attrs 5 */
+ u8 res28[12];
+ u32 rowtar6; /* RIO Outbound Window Translation Addr 6 */
+ u8 res29[4];
+ u32 rowbar6; /* RIO Outbound Window Base Addr 6 */
+ u8 res30[4];
+ u32 rowar6; /* RIO Outbound Attrs 6 */
+ u8 res31[12];
+ u32 rowtar7; /* RIO Outbound Window Translation Addr 7 */
+ u8 res32[4];
+ u32 rowbar7; /* RIO Outbound Window Base Addr 7 */
+ u8 res33[4];
+ u32 rowar7; /* RIO Outbound Attrs 7 */
+ u8 res34[12];
+ u32 rowtar8; /* RIO Outbound Window Translation Addr 8 */
+ u8 res35[4];
+ u32 rowbar8; /* RIO Outbound Window Base Addr 8 */
+ u8 res36[4];
+ u32 rowar8; /* RIO Outbound Attrs 8 */
+ u8 res37[76];
+ u32 riwtar4; /* RIO Inbound Window Translation Addr 4 */
+ u8 res38[4];
+ u32 riwbar4; /* RIO Inbound Window Base Addr 4 */
+ u8 res39[4];
+ u32 riwar4; /* RIO Inbound Attrs 4 */
+ u8 res40[12];
+ u32 riwtar3; /* RIO Inbound Window Translation Addr 3 */
+ u8 res41[4];
+ u32 riwbar3; /* RIO Inbound Window Base Addr 3 */
+ u8 res42[4];
+ u32 riwar3; /* RIO Inbound Attrs 3 */
+ u8 res43[12];
+ u32 riwtar2; /* RIO Inbound Window Translation Addr 2 */
+ u8 res44[4];
+ u32 riwbar2; /* RIO Inbound Window Base Addr 2 */
+ u8 res45[4];
+ u32 riwar2; /* RIO Inbound Attrs 2 */
+ u8 res46[12];
+ u32 riwtar1; /* RIO Inbound Window Translation Addr 1 */
+ u8 res47[4];
+ u32 riwbar1; /* RIO Inbound Window Base Addr 1 */
+ u8 res48[4];
+ u32 riwar1; /* RIO Inbound Attrs 1 */
+ u8 res49[12];
+ u32 riwtar0; /* RIO Inbound Window Translation Addr 0 */
+ u8 res50[12];
+ u32 riwar0; /* RIO Inbound Attrs 0 */
+ u8 res51[12];
+ u32 pnfedr; /* Port Notification/Fatal Error Detect */
+ u32 pnfedir; /* Port Notification/Fatal Error Detect */
+ u32 pnfeier; /* Port Notification/Fatal Error IRQ Enable */
+ u32 pecr; /* Port Error Control */
+ u32 pepcsr0; /* Port Error Packet/Control Symbol 0 */
+ u32 pepr1; /* Port Error Packet 1 */
+ u32 pepr2; /* Port Error Packet 2 */
+ u8 res52[4];
+ u32 predr; /* Port Recoverable Error Detect */
+ u8 res53[4];
+ u32 pertr; /* Port Error Recovery Threshold */
+ u32 prtr; /* Port Retry Threshold */
+ u8 res54[464];
+ u32 omr; /* Outbound Mode */
+ u32 osr; /* Outbound Status */
+ u32 eodqtpar; /* Extended Outbound Desc Queue Tail Ptr Addr */
+ u32 odqtpar; /* Outbound Desc Queue Tail Ptr Addr */
+ u32 eosar; /* Extended Outbound Unit Source Addr */
+ u32 osar; /* Outbound Unit Source Addr */
+ u32 odpr; /* Outbound Destination Port */
+ u32 odatr; /* Outbound Destination Attrs */
+ u32 odcr; /* Outbound Doubleword Count */
+ u32 eodqhpar; /* Extended Outbound Desc Queue Head Ptr Addr */
+ u32 odqhpar; /* Outbound Desc Queue Head Ptr Addr */
+ u8 res55[52];
+ u32 imr; /* Outbound Mode */
+ u32 isr; /* Inbound Status */
+ u32 eidqtpar; /* Extended Inbound Desc Queue Tail Ptr Addr */
+ u32 idqtpar; /* Inbound Desc Queue Tail Ptr Addr */
+ u32 eifqhpar; /* Extended Inbound Frame Queue Head Ptr Addr */
+ u32 ifqhpar; /* Inbound Frame Queue Head Ptr Addr */
+ u8 res56[1000];
+ u32 dmr; /* Doorbell Mode */
+ u32 dsr; /* Doorbell Status */
+ u32 edqtpar; /* Extended Doorbell Queue Tail Ptr Addr */
+ u32 dqtpar; /* Doorbell Queue Tail Ptr Addr */
+ u32 edqhpar; /* Extended Doorbell Queue Head Ptr Addr */
+ u32 dqhpar; /* Doorbell Queue Head Ptr Addr */
+ u8 res57[104];
+ u32 pwmr; /* Port-Write Mode */
+ u32 pwsr; /* Port-Write Status */
+ u32 epwqbar; /* Extended Port-Write Queue Base Addr */
+ u32 pwqbar; /* Port-Write Queue Base Addr */
+ u8 res58[60176];
+} ccsr_rio_t;
+
+/* Quick Engine Block Pin Muxing Registers */
+typedef struct par_io {
+ u32 cpodr;
+ u32 cpdat;
+ u32 cpdir1;
+ u32 cpdir2;
+ u32 cppar1;
+ u32 cppar2;
+ u8 res[8];
+} par_io_t;
+
+#ifdef CONFIG_SYS_FSL_CPC
+/*
+ * Define a single offset that is the start of all the CPC register
+ * blocks - if there is more than one CPC, we expect these to be
+ * contiguous 4k regions
+ */
+
+typedef struct cpc_corenet {
+ u32 cpccsr0; /* Config/status reg */
+ u32 res1;
+ u32 cpccfg0; /* Configuration register */
+ u32 res2;
+ u32 cpcewcr0; /* External Write reg 0 */
+ u32 cpcewabr0; /* External write base reg 0 */
+ u32 res3[2];
+ u32 cpcewcr1; /* External Write reg 1 */
+ u32 cpcewabr1; /* External write base reg 1 */
+ u32 res4[54];
+ u32 cpcsrcr1; /* SRAM control reg 1 */
+ u32 cpcsrcr0; /* SRAM control reg 0 */
+ u32 res5[62];
+ struct {
+ u32 id; /* partition ID */
+ u32 res;
+ u32 alloc; /* partition allocation */
+ u32 way; /* partition way */
+ } partition_regs[16];
+ u32 res6[704];
+ u32 cpcerrinjhi; /* Error injection high */
+ u32 cpcerrinjlo; /* Error injection lo */
+ u32 cpcerrinjctl; /* Error injection control */
+ u32 res7[5];
+ u32 cpccaptdatahi; /* capture data high */
+ u32 cpccaptdatalo; /* capture data low */
+ u32 cpcaptecc; /* capture ECC */
+ u32 res8[5];
+ u32 cpcerrdet; /* error detect */
+ u32 cpcerrdis; /* error disable */
+ u32 cpcerrinten; /* errir interrupt enable */
+ u32 cpcerrattr; /* error attribute */
+ u32 cpcerreaddr; /* error extended address */
+ u32 cpcerraddr; /* error address */
+ u32 cpcerrctl; /* error control */
+ u32 res9[41]; /* pad out to 4k */
+ u32 cpchdbcr0; /* hardware debug control register 0 */
+ u32 res10[63]; /* pad out to 4k */
+} cpc_corenet_t;
+
+#define CPC_CSR0_CE 0x80000000 /* Cache Enable */
+#define CPC_CSR0_PE 0x40000000 /* Enable ECC */
+#define CPC_CSR0_FI 0x00200000 /* Cache Flash Invalidate */
+#define CPC_CSR0_WT 0x00080000 /* Write-through mode */
+#define CPC_CSR0_FL 0x00000800 /* Hardware cache flush */
+#define CPC_CSR0_LFC 0x00000400 /* Cache Lock Flash Clear */
+#define CPC_CFG0_SZ_MASK 0x00003fff
+#define CPC_CFG0_SZ_K(x) ((x & CPC_CFG0_SZ_MASK) << 6)
+#define CPC_CFG0_NUM_WAYS(x) (((x >> 14) & 0x1f) + 1)
+#define CPC_CFG0_LINE_SZ(x) ((((x >> 23) & 0x3) + 1) * 32)
+#define CPC_SRCR1_SRBARU_MASK 0x0000ffff
+#define CPC_SRCR1_SRBARU(x) (((unsigned long long)x >> 32) \
+ & CPC_SRCR1_SRBARU_MASK)
+#define CPC_SRCR0_SRBARL_MASK 0xffff8000
+#define CPC_SRCR0_SRBARL(x) (x & CPC_SRCR0_SRBARL_MASK)
+#define CPC_SRCR0_INTLVEN 0x00000100
+#define CPC_SRCR0_SRAMSZ_1_WAY 0x00000000
+#define CPC_SRCR0_SRAMSZ_2_WAY 0x00000002
+#define CPC_SRCR0_SRAMSZ_4_WAY 0x00000004
+#define CPC_SRCR0_SRAMSZ_8_WAY 0x00000006
+#define CPC_SRCR0_SRAMSZ_16_WAY 0x00000008
+#define CPC_SRCR0_SRAMSZ_32_WAY 0x0000000a
+#define CPC_SRCR0_SRAMEN 0x00000001
+#define CPC_ERRDIS_TMHITDIS 0x00000080 /* multi-way hit disable */
+#define CPC_HDBCR0_CDQ_SPEC_DIS 0x08000000
+#define CPC_HDBCR0_TAG_ECC_SCRUB_DIS 0x01000000
+#define CPC_HDBCR0_DATA_ECC_SCRUB_DIS 0x00400000
+#endif /* CONFIG_SYS_FSL_CPC */
+
+/* Global Utilities Block */
+#ifdef CONFIG_FSL_CORENET
+typedef struct ccsr_gur {
+ u32 porsr1; /* POR status */
+ u8 res1[28];
+ u32 gpporcr1; /* General-purpose POR configuration */
+ u8 res2[12];
+ u32 gpiocr; /* GPIO control */
+ u8 res3[12];
+ u32 gpoutdr; /* General-purpose output data */
+ u8 res4[12];
+ u32 gpindr; /* General-purpose input data */
+ u8 res5[12];
+ u32 alt_pmuxcr; /* Alt function signal multiplex control */
+ u8 res6[12];
+ u32 devdisr; /* Device disable control */
+#define FSL_CORENET_DEVDISR_PCIE1 0x80000000
+#define FSL_CORENET_DEVDISR_PCIE2 0x40000000
+#define FSL_CORENET_DEVDISR_PCIE3 0x20000000
+#define FSL_CORENET_DEVDISR_PCIE4 0x10000000
+#define FSL_CORENET_DEVDISR_RMU 0x08000000
+#define FSL_CORENET_DEVDISR_SRIO1 0x04000000
+#define FSL_CORENET_DEVDISR_SRIO2 0x02000000
+#define FSL_CORENET_DEVDISR_DMA1 0x00400000
+#define FSL_CORENET_DEVDISR_DMA2 0x00200000
+#define FSL_CORENET_DEVDISR_DDR1 0x00100000
+#define FSL_CORENET_DEVDISR_DDR2 0x00080000
+#define FSL_CORENET_DEVDISR_DBG 0x00010000
+#define FSL_CORENET_DEVDISR_NAL 0x00008000
+#define FSL_CORENET_DEVDISR_SATA1 0x00004000
+#define FSL_CORENET_DEVDISR_SATA2 0x00002000
+#define FSL_CORENET_DEVDISR_ELBC 0x00001000
+#define FSL_CORENET_DEVDISR_USB1 0x00000800
+#define FSL_CORENET_DEVDISR_USB2 0x00000400
+#define FSL_CORENET_DEVDISR_ESDHC 0x00000100
+#define FSL_CORENET_DEVDISR_GPIO 0x00000080
+#define FSL_CORENET_DEVDISR_ESPI 0x00000040
+#define FSL_CORENET_DEVDISR_I2C1 0x00000020
+#define FSL_CORENET_DEVDISR_I2C2 0x00000010
+#define FSL_CORENET_DEVDISR_DUART1 0x00000002
+#define FSL_CORENET_DEVDISR_DUART2 0x00000001
+ u32 devdisr2; /* Device disable control 2 */
+#define FSL_CORENET_DEVDISR2_PME 0x80000000
+#define FSL_CORENET_DEVDISR2_SEC 0x40000000
+#define FSL_CORENET_DEVDISR2_QMBM 0x08000000
+#define FSL_CORENET_DEVDISR2_FM1 0x02000000
+#define FSL_CORENET_DEVDISR2_10GEC1 0x01000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_1 0x00800000
+#define FSL_CORENET_DEVDISR2_DTSEC1_2 0x00400000
+#define FSL_CORENET_DEVDISR2_DTSEC1_3 0x00200000
+#define FSL_CORENET_DEVDISR2_DTSEC1_4 0x00100000
+#define FSL_CORENET_DEVDISR2_DTSEC1_5 0x00080000
+#define FSL_CORENET_DEVDISR2_FM2 0x00020000
+#define FSL_CORENET_DEVDISR2_10GEC2 0x00010000
+#define FSL_CORENET_DEVDISR2_DTSEC2_1 0x00008000
+#define FSL_CORENET_DEVDISR2_DTSEC2_2 0x00004000
+#define FSL_CORENET_DEVDISR2_DTSEC2_3 0x00002000
+#define FSL_CORENET_DEVDISR2_DTSEC2_4 0x00001000
+#define FSL_CORENET_NUM_DEVDISR 2
+ u8 res7[8];
+ u32 powmgtcsr; /* Power management status & control */
+ u8 res8[12];
+ u32 coredisru; /* uppper portion for support of 64 cores */
+ u32 coredisrl; /* lower portion for support of 64 cores */
+ u8 res9[8];
+ u32 pvr; /* Processor version */
+ u32 svr; /* System version */
+ u8 res10[8];
+ u32 rstcr; /* Reset control */
+ u32 rstrqpblsr; /* Reset request preboot loader status */
+ u8 res11[8];
+ u32 rstrqmr1; /* Reset request mask */
+ u8 res12[4];
+ u32 rstrqsr1; /* Reset request status */
+ u8 res13[4];
+ u8 res14[4];
+ u32 rstrqwdtmrl; /* Reset request WDT mask */
+ u8 res15[4];
+ u32 rstrqwdtsrl; /* Reset request WDT status */
+ u8 res16[4];
+ u32 brrl; /* Boot release */
+ u8 res17[24];
+ u32 rcwsr[16]; /* Reset control word status */
+#define FSL_CORENET_RCWSR4_SRDS_PRTCL 0xfc000000
+#define FSL_CORENET_RCWSR5_DDR_SYNC 0x00000080
+#define FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT 7
+#define FSL_CORENET_RCWSR5_SRDS_EN 0x00002000
+#define FSL_CORENET_RCWSRn_SRDS_LPD_B2 0x3c000000 /* bits 162..165 */
+#define FSL_CORENET_RCWSRn_SRDS_LPD_B3 0x003c0000 /* bits 170..173 */
+#define FSL_CORENET_RCWSR7_MCK_TO_PLAT_RAT 0x00400000
+#define FSL_CORENET_RCWSR8_HOST_AGT_B1 0x00e00000
+#define FSL_CORENET_RCWSR8_HOST_AGT_B2 0x00100000
+#define FSL_CORENET_RCWSR11_EC1 0x00c00000 /* bits 360..361 */
+#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1 0x00000000
+#define FSL_CORENET_RCWSR11_EC1_FM1_USB1 0x00800000
+#define FSL_CORENET_RCWSR11_EC2 0x001c0000 /* bits 363..365 */
+#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1 0x00000000
+#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2 0x00080000
+#define FSL_CORENET_RCWSR11_EC2_USB2 0x00100000
+ u8 res18[192];
+ u32 scratchrw[4]; /* Scratch Read/Write */
+ u8 res19[240];
+ u32 scratchw1r[4]; /* Scratch Read (Write once) */
+ u8 res20[240];
+ u32 scrtsr[8]; /* Core reset status */
+ u8 res21[224];
+ u32 pex1liodnr; /* PCI Express 1 LIODN */
+ u32 pex2liodnr; /* PCI Express 2 LIODN */
+ u32 pex3liodnr; /* PCI Express 3 LIODN */
+ u32 pex4liodnr; /* PCI Express 4 LIODN */
+ u32 rio1liodnr; /* RIO 1 LIODN */
+ u32 rio2liodnr; /* RIO 2 LIODN */
+ u32 rio3liodnr; /* RIO 3 LIODN */
+ u32 rio4liodnr; /* RIO 4 LIODN */
+ u32 usb1liodnr; /* USB 1 LIODN */
+ u32 usb2liodnr; /* USB 2 LIODN */
+ u32 usb3liodnr; /* USB 3 LIODN */
+ u32 usb4liodnr; /* USB 4 LIODN */
+ u32 sdmmc1liodnr; /* SD/MMC 1 LIODN */
+ u32 sdmmc2liodnr; /* SD/MMC 2 LIODN */
+ u32 sdmmc3liodnr; /* SD/MMC 3 LIODN */
+ u32 sdmmc4liodnr; /* SD/MMC 4 LIODN */
+ u32 rio1maintliodnr;/* RIO 1 Maintenance LIODN */
+ u32 rio2maintliodnr;/* RIO 2 Maintenance LIODN */
+ u32 rio3maintliodnr;/* RIO 3 Maintenance LIODN */
+ u32 rio4maintliodnr;/* RIO 4 Maintenance LIODN */
+ u32 sata1liodnr; /* SATA 1 LIODN */
+ u32 sata2liodnr; /* SATA 2 LIODN */
+ u32 sata3liodnr; /* SATA 3 LIODN */
+ u32 sata4liodnr; /* SATA 4 LIODN */
+ u8 res22[32];
+ u32 dma1liodnr; /* DMA 1 LIODN */
+ u32 dma2liodnr; /* DMA 2 LIODN */
+ u32 dma3liodnr; /* DMA 3 LIODN */
+ u32 dma4liodnr; /* DMA 4 LIODN */
+ u8 res23[48];
+ u8 res24[64];
+ u32 pblsr; /* Preboot loader status */
+ u32 pamubypenr; /* PAMU bypass enable */
+ u32 dmacr1; /* DMA control */
+ u8 res25[4];
+ u32 gensr1; /* General status */
+ u8 res26[12];
+ u32 gencr1; /* General control */
+ u8 res27[12];
+ u8 res28[4];
+ u32 cgensrl; /* Core general status */
+ u8 res29[8];
+ u8 res30[4];
+ u32 cgencrl; /* Core general control */
+ u8 res31[184];
+ u32 sriopstecr; /* SRIO prescaler timer enable control */
+ u8 res32[1788];
+ u32 pmuxcr; /* Pin multiplexing control */
+ u8 res33[60];
+ u32 iovselsr; /* I/O voltage selection status */
+ u8 res34[28];
+ u32 ddrclkdr; /* DDR clock disable */
+ u8 res35;
+ u32 elbcclkdr; /* eLBC clock disable */
+ u8 res36[20];
+ u32 sdhcpcr; /* eSDHC polarity configuration */
+ u8 res37[380];
+} ccsr_gur_t;
+
+/*
+ * On p4080 we have an LIODN for msg unit (rmu) but not maintenance
+ * everything after has RMan thus msg unit LIODN is used for maintenance
+ */
+#define rmuliodnr rio1maintliodnr
+
+typedef struct ccsr_clk {
+ u32 clkc0csr; /* Core 0 Clock control/status */
+ u8 res1[0x1c];
+ u32 clkc1csr; /* Core 1 Clock control/status */
+ u8 res2[0x1c];
+ u32 clkc2csr; /* Core 2 Clock control/status */
+ u8 res3[0x1c];
+ u32 clkc3csr; /* Core 3 Clock control/status */
+ u8 res4[0x1c];
+ u32 clkc4csr; /* Core 4 Clock control/status */
+ u8 res5[0x1c];
+ u32 clkc5csr; /* Core 5 Clock control/status */
+ u8 res6[0x1c];
+ u32 clkc6csr; /* Core 6 Clock control/status */
+ u8 res7[0x1c];
+ u32 clkc7csr; /* Core 7 Clock control/status */
+ u8 res8[0x71c];
+ u32 pllc1gsr; /* Cluster PLL 1 General Status */
+ u8 res10[0x1c];
+ u32 pllc2gsr; /* Cluster PLL 2 General Status */
+ u8 res11[0x1c];
+ u32 pllc3gsr; /* Cluster PLL 3 General Status */
+ u8 res12[0x1c];
+ u32 pllc4gsr; /* Cluster PLL 4 General Status */
+ u8 res13[0x39c];
+ u32 pllpgsr; /* Platform PLL General Status */
+ u8 res14[0x1c];
+ u32 plldgsr; /* DDR PLL General Status */
+ u8 res15[0x3dc];
+} ccsr_clk_t;
+
+typedef struct ccsr_rcpm {
+ u8 res1[4];
+ u32 cdozsrl; /* Core Doze Status */
+ u8 res2[4];
+ u32 cdozcrl; /* Core Doze Control */
+ u8 res3[4];
+ u32 cnapsrl; /* Core Nap Status */
+ u8 res4[4];
+ u32 cnapcrl; /* Core Nap Control */
+ u8 res5[4];
+ u32 cdozpsrl; /* Core Doze Previous Status */
+ u8 res6[4];
+ u32 cdozpcrl; /* Core Doze Previous Control */
+ u8 res7[4];
+ u32 cwaitsrl; /* Core Wait Status */
+ u8 res8[8];
+ u32 powmgtcsr; /* Power Mangement Control & Status */
+ u8 res9[12];
+ u32 ippdexpcr0; /* IP Powerdown Exception Control 0 */
+ u8 res10[12];
+ u8 res11[4];
+ u32 cpmimrl; /* Core PM IRQ Masking */
+ u8 res12[4];
+ u32 cpmcimrl; /* Core PM Critical IRQ Masking */
+ u8 res13[4];
+ u32 cpmmcimrl; /* Core PM Machine Check IRQ Masking */
+ u8 res14[4];
+ u32 cpmnmimrl; /* Core PM NMI Masking */
+ u8 res15[4];
+ u32 ctbenrl; /* Core Time Base Enable */
+ u8 res16[4];
+ u32 ctbclkselrl; /* Core Time Base Clock Select */
+ u8 res17[4];
+ u32 ctbhltcrl; /* Core Time Base Halt Control */
+ u8 res18[0xf68];
+} ccsr_rcpm_t;
+
+#else
+typedef struct ccsr_gur {
+ u32 porpllsr; /* POR PLL ratio status */
+#ifdef CONFIG_MPC8536
+#define MPC85xx_PORPLLSR_DDR_RATIO 0x3e000000
+#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 25
+#else
+#define MPC85xx_PORPLLSR_DDR_RATIO 0x00003e00
+#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 9
+#endif
+#define MPC85xx_PORPLLSR_QE_RATIO 0x3e000000
+#define MPC85xx_PORPLLSR_QE_RATIO_SHIFT 25
+#define MPC85xx_PORPLLSR_PLAT_RATIO 0x0000003e
+#define MPC85xx_PORPLLSR_PLAT_RATIO_SHIFT 1
+ u32 porbmsr; /* POR boot mode status */
+#define MPC85xx_PORBMSR_HA 0x00070000
+#define MPC85xx_PORBMSR_HA_SHIFT 16
+ u32 porimpscr; /* POR I/O impedance status & control */
+ u32 pordevsr; /* POR I/O device status regsiter */
+#define MPC85xx_PORDEVSR_SGMII1_DIS 0x20000000
+#define MPC85xx_PORDEVSR_SGMII2_DIS 0x10000000
+#define MPC85xx_PORDEVSR_SGMII3_DIS 0x08000000
+#define MPC85xx_PORDEVSR_SGMII4_DIS 0x04000000
+#define MPC85xx_PORDEVSR_SRDS2_IO_SEL 0x38000000
+#define MPC85xx_PORDEVSR_PCI1 0x00800000
+#if defined(CONFIG_P1013) || defined(CONFIG_P1022) || defined(CONFIG_ATH40G)
+#define MPC85xx_PORDEVSR_IO_SEL 0x007c0000
+#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 18
+#else
+#define MPC85xx_PORDEVSR_IO_SEL 0x00780000
+#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19
+#endif
+#define MPC85xx_PORDEVSR_PCI2_ARB 0x00040000
+#define MPC85xx_PORDEVSR_PCI1_ARB 0x00020000
+#define MPC85xx_PORDEVSR_PCI1_PCI32 0x00010000
+#define MPC85xx_PORDEVSR_PCI1_SPD 0x00008000
+#define MPC85xx_PORDEVSR_PCI2_SPD 0x00004000
+#define MPC85xx_PORDEVSR_DRAM_RTYPE 0x00000060
+#define MPC85xx_PORDEVSR_RIO_CTLS 0x00000008
+#define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007
+ u32 pordbgmsr; /* POR debug mode status */
+ u32 pordevsr2; /* POR I/O device status 2 */
+/* The 8544 RM says this is bit 26, but it's really bit 24 */
+#define MPC85xx_PORDEVSR2_SEC_CFG 0x00000080
+ u8 res1[8];
+ u32 gpporcr; /* General-purpose POR configuration */
+ u8 res2[12];
+ u32 gpiocr; /* GPIO control */
+#define MPC85xx_GPIOCR_GPOUT 0x00000200
+ u8 res3[12];
+#if defined(CONFIG_MPC8569)
+ u32 plppar1; /* Platform port pin assignment 1 */
+ u32 plppar2; /* Platform port pin assignment 2 */
+ u32 plpdir1; /* Platform port pin direction 1 */
+ u32 plpdir2; /* Platform port pin direction 2 */
+#else
+ u32 gpoutdr; /* General-purpose output data */
+#define MPC85xx_GPOUTDR_GPIO0 0x80000000
+#define MPC85xx_GPOUTDR_GPIO1 0x40000000
+#define MPC85xx_GPOUTDR_GPIO2 0x20000000
+#define MPC85xx_GPOUTDR_GPIO3 0x10000000
+#define MPC85xx_GPOUTDR_GPIO4 0x08000000
+#define MPC85xx_GPOUTDR_GPIO5 0x04000000
+#define MPC85xx_GPOUTDR_GPIO6 0x02000000
+#define MPC85xx_GPOUTDR_GPIO7 0x01000000
+ u8 res4[12];
+#endif
+ u32 gpindr; /* General-purpose input data */
+ u8 res5[12];
+ u32 pmuxcr; /* Alt. function signal multiplex control */
+#define MPC85xx_PMUXCR_SD_DATA 0x80000000
+#define MPC85xx_PMUXCR_SDHC_CD 0x40000000
+#define MPC85xx_PMUXCR_SDHC_WP 0x20000000
+ u32 pmuxcr2; /* Alt. function signal multiplex control 2 */
+ u8 res6[8];
+ u32 devdisr; /* Device disable control */
+#define MPC85xx_DEVDISR_PCI1 0x80000000
+#define MPC85xx_DEVDISR_PCI2 0x40000000
+#define MPC85xx_DEVDISR_PCIE 0x20000000
+#define MPC85xx_DEVDISR_LBC 0x08000000
+#define MPC85xx_DEVDISR_PCIE2 0x04000000
+#define MPC85xx_DEVDISR_PCIE3 0x02000000
+#define MPC85xx_DEVDISR_SEC 0x01000000
+#define MPC85xx_DEVDISR_SRIO 0x00080000
+#define MPC85xx_DEVDISR_RMSG 0x00040000
+#define MPC85xx_DEVDISR_DDR 0x00010000
+#define MPC85xx_DEVDISR_CPU 0x00008000
+#define MPC85xx_DEVDISR_CPU0 MPC85xx_DEVDISR_CPU
+#define MPC85xx_DEVDISR_TB 0x00004000
+#define MPC85xx_DEVDISR_TB0 MPC85xx_DEVDISR_TB
+#define MPC85xx_DEVDISR_CPU1 0x00002000
+#define MPC85xx_DEVDISR_TB1 0x00001000
+#define MPC85xx_DEVDISR_DMA 0x00000400
+#define MPC85xx_DEVDISR_TSEC1 0x00000080
+#define MPC85xx_DEVDISR_TSEC2 0x00000040
+#define MPC85xx_DEVDISR_TSEC3 0x00000020
+#define MPC85xx_DEVDISR_TSEC4 0x00000010
+#define MPC85xx_DEVDISR_I2C 0x00000004
+#define MPC85xx_DEVDISR_DUART 0x00000002
+ u8 res7[12];
+ u32 powmgtcsr; /* Power management status & control */
+ u8 res8[12];
+ u32 mcpsumr; /* Machine check summary */
+ u8 res9[12];
+ u32 pvr; /* Processor version */
+ u32 svr; /* System version */
+ u8 res10a[8];
+ u32 rstcr; /* Reset control */
+#if defined(CONFIG_MPC8568)||defined(CONFIG_MPC8569)
+ u8 res10b[76];
+ par_io_t qe_par_io[7];
+ u8 res10c[1600];
+#else
+ u8 res10b[1868];
+#endif
+ u32 clkdvdr; /* Clock Divide register */
+ u8 res10cc[804];
+ u32 ddrclkdr; /* DDR clock disable register */
+ u8 res10d[724];
+ u32 clkocr; /* Clock out select */
+ u8 res11[12];
+ u32 ddrdllcr; /* DDR DLL control */
+ u8 res12[12];
+ u32 lbcdllcr; /* LBC DLL control */
+ u8 res13[248];
+ u32 lbiuiplldcr0; /* LBIU PLL Debug Reg 0 */
+ u32 lbiuiplldcr1; /* LBIU PLL Debug Reg 1 */
+ u32 ddrioovcr; /* DDR IO Override Control */
+ u32 tsec12ioovcr; /* eTSEC 1/2 IO override control */
+ u32 tsec34ioovcr; /* eTSEC 3/4 IO override control */
+ u8 res15[61648];
+} ccsr_gur_t;
+#endif
+
+typedef struct serdes_corenet {
+ struct {
+ u32 rstctl; /* Reset Control Register */
+#define SRDS_RSTCTL_RST 0x80000000
+#define SRDS_RSTCTL_RSTDONE 0x40000000
+#define SRDS_RSTCTL_RSTERR 0x20000000
+#define SRDS_RSTCTL_SDPD 0x00000020
+ u32 pllcr0; /* PLL Control Register 0 */
+#define SRDS_PLLCR0_RFCK_SEL_MASK 0x30000000
+#define SRDS_PLLCR0_RFCK_SEL_100 0x00000000
+#define SRDS_PLLCR0_RFCK_SEL_125 0x10000000
+#define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000
+#define SRDS_PLLCR0_FRATE_SEL_MASK 0x00030000
+#define SRDS_PLLCR0_FRATE_SEL_5 0x00000000
+#define SRDS_PLLCR0_FRATE_SEL_6_25 0x00010000
+ u32 pllcr1; /* PLL Control Register 1 */
+#define SRDS_PLLCR1_PLL_BWSEL 0x08000000
+ u32 res[5];
+ } bank[3];
+ u32 res1[12];
+ u32 srdstcalcr; /* TX Calibration Control */
+ u32 res2[3];
+ u32 srdsrcalcr; /* RX Calibration Control */
+ u32 res3[3];
+ u32 srdsgr0; /* General Register 0 */
+ u32 res4[11];
+ u32 srdspccr0; /* Protocol Converter Config 0 */
+ u32 srdspccr1; /* Protocol Converter Config 1 */
+ u32 srdspccr2; /* Protocol Converter Config 2 */
+#define SRDS_PCCR2_RST_XGMII1 0x00800000
+#define SRDS_PCCR2_RST_XGMII2 0x00400000
+ u32 res5[197];
+ struct {
+ u32 gcr0; /* General Control Register 0 */
+#define SRDS_GCR0_RRST 0x00400000
+#define SRDS_GCR0_1STLANE 0x00010000
+ u32 gcr1; /* General Control Register 1 */
+#define SRDS_GCR1_REIDL_CTL_MASK 0x001f0000
+#define SRDS_GCR1_REIDL_CTL_PCIE 0x00100000
+#define SRDS_GCR1_REIDL_CTL_SRIO 0x00000000
+#define SRDS_GCR1_REIDL_CTL_SGMII 0x00040000
+#define SRDS_GCR1_OPAD_CTL 0x04000000
+ u32 res1[4];
+ u32 tecr0; /* TX Equalization Control Reg 0 */
+#define SRDS_TECR0_TEQ_TYPE_MASK 0x30000000
+#define SRDS_TECR0_TEQ_TYPE_2LVL 0x10000000
+ u32 res3;
+ u32 ttlcr0; /* Transition Tracking Loop Ctrl 0 */
+ u32 res4[7];
+ } lane[24];
+ u32 res6[384];
+} serdes_corenet_t;
+
+enum {
+ FSL_SRDS_B1_LANE_A = 0,
+ FSL_SRDS_B1_LANE_B = 1,
+ FSL_SRDS_B1_LANE_C = 2,
+ FSL_SRDS_B1_LANE_D = 3,
+ FSL_SRDS_B1_LANE_E = 4,
+ FSL_SRDS_B1_LANE_F = 5,
+ FSL_SRDS_B1_LANE_G = 6,
+ FSL_SRDS_B1_LANE_H = 7,
+ FSL_SRDS_B1_LANE_I = 8,
+ FSL_SRDS_B1_LANE_J = 9,
+ FSL_SRDS_B2_LANE_A = 16,
+ FSL_SRDS_B2_LANE_B = 17,
+ FSL_SRDS_B2_LANE_C = 18,
+ FSL_SRDS_B2_LANE_D = 19,
+ FSL_SRDS_B3_LANE_A = 20,
+ FSL_SRDS_B3_LANE_B = 21,
+ FSL_SRDS_B3_LANE_C = 22,
+ FSL_SRDS_B3_LANE_D = 23,
+};
+
+/* Security Engine Block (MS = Most Sig., LS = Least Sig.) */
+#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
+typedef struct ccsr_sec {
+ u32 res0;
+ u32 mcfgr; /* Master CFG Register */
+ u8 res1[0x8];
+ struct {
+ u32 ms; /* Job Ring LIODN Register, MS */
+ u32 ls; /* Job Ring LIODN Register, LS */
+ } jrliodnr[4];
+ u8 res2[0x30];
+ struct {
+ u32 ms; /* RTIC LIODN Register, MS */
+ u32 ls; /* RTIC LIODN Register, LS */
+ } rticliodnr[4];
+ u8 res3[0x1c];
+ u32 decorr; /* DECO Request Register */
+ struct {
+ u32 ms; /* DECO LIODN Register, MS */
+ u32 ls; /* DECO LIODN Register, LS */
+ } decoliodnr[5];
+ u8 res4[0x58];
+ u32 dar; /* DECO Avail Register */
+ u32 drr; /* DECO Reset Register */
+ u8 res5[0xe78];
+ u32 crnr_ms; /* CHA Revision Number Register, MS */
+ u32 crnr_ls; /* CHA Revision Number Register, LS */
+ u32 ctpr_ms; /* Compile Time Parameters Register, MS */
+ u32 ctpr_ls; /* Compile Time Parameters Register, LS */
+ u8 res6[0x10];
+ u32 far_ms; /* Fault Address Register, MS */
+ u32 far_ls; /* Fault Address Register, LS */
+ u32 falr; /* Fault Address LIODN Register */
+ u32 fadr; /* Fault Address Detail Register */
+ u8 res7[0x4];
+ u32 csta; /* CAAM Status Register */
+ u8 res8[0x8];
+ u32 rvid; /* Run Time Integrity Checking Version ID Reg.*/
+ u32 ccbvid; /* CHA Cluster Block Version ID Register */
+ u32 chavid_ms; /* CHA Version ID Register, MS */
+ u32 chavid_ls; /* CHA Version ID Register, LS */
+ u32 chanum_ms; /* CHA Number Register, MS */
+ u32 chanum_ls; /* CHA Number Register, LS */
+ u32 secvid_ms; /* SEC Version ID Register, MS */
+ u32 secvid_ls; /* SEC Version ID Register, LS */
+ u8 res9[0x6020];
+ u32 qilcr_ms; /* Queue Interface LIODN CFG Register, MS */
+ u32 qilcr_ls; /* Queue Interface LIODN CFG Register, LS */
+ u8 res10[0x8fd8];
+} ccsr_sec_t;
+
+#define SEC_CTPR_MS_AXI_LIODN 0x08000000
+#define SEC_CTPR_MS_QI 0x02000000
+#define SEC_RVID_MA 0x0f000000
+#define SEC_CHANUM_MS_JRNUM_MASK 0xf0000000
+#define SEC_CHANUM_MS_JRNUM_SHIFT 28
+#define SEC_CHANUM_MS_DECONUM_MASK 0x0f000000
+#define SEC_CHANUM_MS_DECONUM_SHIFT 24
+#endif
+
+typedef struct ccsr_qman {
+ struct {
+ u32 qcsp_lio_cfg; /* 0x0 - SW Portal n LIO cfg */
+ u32 qcsp_io_cfg; /* 0x4 - SW Portal n IO cfg */
+ u32 res;
+ u32 qcsp_dd_cfg; /* 0xc - SW Portal n Dynamic Debug cfg */
+ } qcsp[32];
+
+ /* Not actually reserved, but irrelevant to u-boot */
+ u8 res[0xbf8 - 0x200];
+ u32 ip_rev_1;
+ u32 ip_rev_2;
+ u32 fqd_bare; /* FQD Extended Base Addr Register */
+ u32 fqd_bar; /* FQD Base Addr Register */
+ u8 res1[0x8];
+ u32 fqd_ar; /* FQD Attributes Register */
+ u8 res2[0xc];
+ u32 pfdr_bare; /* PFDR Extended Base Addr Register */
+ u32 pfdr_bar; /* PFDR Base Addr Register */
+ u8 res3[0x8];
+ u32 pfdr_ar; /* PFDR Attributes Register */
+ u8 res4[0x4c];
+ u32 qcsp_bare; /* QCSP Extended Base Addr Register */
+ u32 qcsp_bar; /* QCSP Base Addr Register */
+ u8 res5[0x78];
+ u32 ci_sched_cfg; /* Initiator Scheduling Configuration */
+ u32 srcidr; /* Source ID Register */
+ u32 liodnr; /* LIODN Register */
+ u8 res6[4];
+ u32 ci_rlm_cfg; /* Initiator Read Latency Monitor Cfg */
+ u32 ci_rlm_avg; /* Initiator Read Latency Monitor Avg */
+ u8 res7[0x2e8];
+} ccsr_qman_t;
+
+typedef struct ccsr_bman {
+ /* Not actually reserved, but irrelevant to u-boot */
+ u8 res[0xbf8];
+ u32 ip_rev_1;
+ u32 ip_rev_2;
+ u32 fbpr_bare; /* FBPR Extended Base Addr Register */
+ u32 fbpr_bar; /* FBPR Base Addr Register */
+ u8 res1[0x8];
+ u32 fbpr_ar; /* FBPR Attributes Register */
+ u8 res2[0xf0];
+ u32 srcidr; /* Source ID Register */
+ u32 liodnr; /* LIODN Register */
+ u8 res7[0x2f4];
+} ccsr_bman_t;
+
+typedef struct ccsr_pme {
+ u8 res0[0x804];
+ u32 liodnbr; /* LIODN Base Register */
+ u8 res1[0x1f8];
+ u32 srcidr; /* Source ID Register */
+ u8 res2[8];
+ u32 liodnr; /* LIODN Register */
+ u8 res3[0x1e8];
+ u32 pm_ip_rev_1; /* PME IP Block Revision Reg 1*/
+ u32 pm_ip_rev_2; /* PME IP Block Revision Reg 1*/
+ u8 res4[0x400];
+} ccsr_pme_t;
+
+#ifdef CONFIG_FSL_CORENET
+#define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000
+#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x8000
+#define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x9000
+#define CONFIG_SYS_FSL_CORENET_CLK_OFFSET 0xE1000
+#define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET 0xE2000
+#define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET 0xEA000
+#define CONFIG_SYS_FSL_CPC_OFFSET 0x10000
+#define CONFIG_SYS_MPC85xx_DMA1_OFFSET 0x100000
+#define CONFIG_SYS_MPC85xx_DMA2_OFFSET 0x101000
+#define CONFIG_SYS_MPC85xx_DMA_OFFSET CONFIG_SYS_MPC85xx_DMA1_OFFSET
+#define CONFIG_SYS_MPC85xx_ESPI_OFFSET 0x110000
+#define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x114000
+#define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x124000
+#define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0x130000
+#define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0x200000
+#define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x201000
+#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x202000
+#define CONFIG_SYS_MPC85xx_PCIE4_OFFSET 0x203000
+#define CONFIG_SYS_MPC85xx_USB1_OFFSET 0x210000
+#define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x211000
+#define CONFIG_SYS_MPC85xx_USB_OFFSET CONFIG_SYS_MPC85xx_USB1_OFFSET
+#define CONFIG_SYS_MPC85xx_SATA1_OFFSET 0x220000
+#define CONFIG_SYS_MPC85xx_SATA2_OFFSET 0x221000
+#define CONFIG_SYS_FSL_SEC_OFFSET 0x300000
+#define CONFIG_SYS_FSL_CORENET_PME_OFFSET 0x316000
+#define CONFIG_SYS_FSL_CORENET_QMAN_OFFSET 0x318000
+#define CONFIG_SYS_FSL_CORENET_BMAN_OFFSET 0x31a000
+#define CONFIG_SYS_FSL_FM1_OFFSET 0x400000
+#define CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET 0x488000
+#define CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET 0x489000
+#define CONFIG_SYS_FSL_FM1_RX2_1G_OFFSET 0x48a000
+#define CONFIG_SYS_FSL_FM1_RX3_1G_OFFSET 0x48b000
+#define CONFIG_SYS_FSL_FM1_RX4_1G_OFFSET 0x48c000
+#define CONFIG_SYS_FSL_FM1_RX0_10G_OFFSET 0x490000
+#define CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET 0x4e0000
+#define CONFIG_SYS_FSL_FM2_OFFSET 0x500000
+#define CONFIG_SYS_FSL_FM2_RX0_1G_OFFSET 0x588000
+#define CONFIG_SYS_FSL_FM2_RX1_1G_OFFSET 0x589000
+#define CONFIG_SYS_FSL_FM2_RX2_1G_OFFSET 0x58a000
+#define CONFIG_SYS_FSL_FM2_RX3_1G_OFFSET 0x58b000
+#define CONFIG_SYS_FSL_FM2_RX4_1G_OFFSET 0x58c000
+#define CONFIG_SYS_FSL_FM2_RX0_10G_OFFSET 0x590000
+#else
+#define CONFIG_SYS_MPC85xx_ECM_OFFSET 0x0000
+#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x2000
+#define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x5000
+#define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x6000
+#define CONFIG_SYS_MPC85xx_ESPI_OFFSET 0x7000
+#define CONFIG_SYS_MPC85xx_PCI1_OFFSET 0x8000
+#define CONFIG_SYS_MPC85xx_PCIX_OFFSET 0x8000
+#define CONFIG_SYS_MPC85xx_PCI2_OFFSET 0x9000
+#define CONFIG_SYS_MPC85xx_PCIX2_OFFSET 0x9000
+#define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0xa000
+#define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x9000
+#if defined(CONFIG_MPC8572) || defined(CONFIG_P2020)
+#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x8000
+#else
+#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0xb000
+#endif
+#define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0xF000
+#define CONFIG_SYS_MPC85xx_SATA1_OFFSET 0x18000
+#define CONFIG_SYS_MPC85xx_SATA2_OFFSET 0x19000
+#define CONFIG_SYS_MPC85xx_L2_OFFSET 0x20000
+#define CONFIG_SYS_MPC85xx_DMA_OFFSET 0x21000
+#define CONFIG_SYS_MPC85xx_USB_OFFSET 0x22000
+#ifdef CONFIG_TSECV2
+#define CONFIG_SYS_TSEC1_OFFSET 0xB0000
+#else
+#define CONFIG_SYS_TSEC1_OFFSET 0x24000
+#endif
+#define CONFIG_SYS_MDIO1_OFFSET 0x24000
+#define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000
+#define CONFIG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100
+#define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000
+#define CONFIG_SYS_MPC85xx_CPM_OFFSET 0x80000
+#endif
+
+#define CONFIG_SYS_MPC85xx_PIC_OFFSET 0x40000
+#define CONFIG_SYS_MPC85xx_GUTS_OFFSET 0xE0000
+
+#define CONFIG_SYS_FSL_CPC_ADDR \
+ (CONFIG_SYS_CCSRBAR + CONFIG_SYS_FSL_CPC_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_QMAN_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_QMAN_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_BMAN_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_BMAN_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_PME_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_PME_OFFSET)
+#define CONFIG_SYS_MPC85xx_GUTS_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GUTS_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_CCM_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_CCM_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_CLK_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_CLK_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_RCPM_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_RCPM_OFFSET)
+#define CONFIG_SYS_MPC85xx_ECM_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ECM_OFFSET)
+#define CONFIG_SYS_MPC85xx_DDR_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR_OFFSET)
+#define CONFIG_SYS_MPC85xx_DDR2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET)
+#define CONFIG_SYS_LBC_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET)
+#define CONFIG_SYS_MPC85xx_ESPI_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESPI_OFFSET)
+#define CONFIG_SYS_MPC85xx_PCIX_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIX_OFFSET)
+#define CONFIG_SYS_MPC85xx_PCIX2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIX2_OFFSET)
+#define CONFIG_SYS_MPC85xx_GPIO_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GPIO_OFFSET)
+#define CONFIG_SYS_MPC85xx_SATA1_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SATA1_OFFSET)
+#define CONFIG_SYS_MPC85xx_SATA2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SATA2_OFFSET)
+#define CONFIG_SYS_MPC85xx_L2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_L2_OFFSET)
+#define CONFIG_SYS_MPC85xx_DMA_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DMA_OFFSET)
+#define CONFIG_SYS_MPC85xx_ESDHC_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESDHC_OFFSET)
+#define CONFIG_SYS_MPC8xxx_PIC_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PIC_OFFSET)
+#define CONFIG_SYS_MPC85xx_CPM_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_CPM_OFFSET)
+#define CONFIG_SYS_MPC85xx_SERDES1_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES1_OFFSET)
+#define CONFIG_SYS_MPC85xx_SERDES2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_SERDES_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES_OFFSET)
+#define CONFIG_SYS_MPC85xx_USB_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET)
+#define CONFIG_SYS_FSL_SEC_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SEC_OFFSET)
+#define CONFIG_SYS_FSL_FM1_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_FM1_OFFSET)
+#define CONFIG_SYS_FSL_FM1_DTSEC1_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET)
+#define CONFIG_SYS_FSL_FM2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_FM2_OFFSET)
+
+#define CONFIG_SYS_PCI1_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCI1_OFFSET)
+#define CONFIG_SYS_PCI2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCI2_OFFSET)
+#define CONFIG_SYS_PCIE1_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE1_OFFSET)
+#define CONFIG_SYS_PCIE2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE2_OFFSET)
+#define CONFIG_SYS_PCIE3_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE3_OFFSET)
+#define CONFIG_SYS_PCIE4_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE4_OFFSET)
+
+#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
+#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
+
+#endif /*__IMMAP_85xx__*/
diff --git a/arch/ppc/mach-mpc8xxx/include/mach/mpc85xx.h b/arch/ppc/mach-mpc8xxx/include/mach/mpc85xx.h
new file mode 100644
index 0000000..64a3a9a
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/include/mach/mpc85xx.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2004, 2007 Freescale Semiconductor.
+ * Copyright(c) 2003 Motorola Inc.
+ */
+
+#ifndef __MPC85xx_H__
+#define __MPC85xx_H__
+
+/* define for common ppc_asm.tmpl */
+#define EXC_OFF_SYS_RESET 0x100 /* System reset */
+#define _START_OFFSET 0
+
+#if defined(CONFIG_E500)
+#include <asm/e500.h>
+#endif
+
+/*
+ * SCCR - System Clock Control Register, 9-8
+ */
+#define SCCR_CLPD 0x00000004 /* CPM Low Power Disable */
+#define SCCR_DFBRG_MSK 0x00000003 /* Division by BRGCLK Mask */
+#define SCCR_DFBRG_SHIFT 0
+
+#define SCCR_DFBRG00 0x00000000 /* BRGCLK division by 4 */
+#define SCCR_DFBRG01 0x00000001 /* BRGCLK div by 16 (normal) */
+#define SCCR_DFBRG10 0x00000002 /* BRGCLK division by 64 */
+#define SCCR_DFBRG11 0x00000003 /* BRGCLK division by 256 */
+
+#endif /* __MPC85xx_H__ */
diff --git a/arch/ppc/mach-mpc8xxx/include/mach/nand_upm.h b/arch/ppc/mach-mpc8xxx/include/mach/nand_upm.h
new file mode 100644
index 0000000..b26134d
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/include/mach/nand_upm.h
@@ -0,0 +1,36 @@
+/**
+ * @file
+ * @brief This file contains exported structure for UPM state machine
+ *
+ * FileName: mach-mpc85xx/include/mach/nand_upm.h
+ *
+ * UPM state machine platform data.
+ *
+ */
+/*
+ * (C) Copyright 2011
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __NAND_UPM_H
+#include <asm/fsl_upm.h>
+
+/* Structure for table with supported UPM timings */
+struct upm_freq {
+ ulong freq;
+ const u32 *upm_patt;
+ uchar gpl4_disable;
+ uchar ehtr;
+ uchar ead;
+};
+
+
+struct upm_platform_data {
+ struct upm_freq *upm_freq_table; /* frequency table */
+ struct fsl_upm_nand *fun; /* NAND params and UPM regs */
+ void (*upm_setup) (struct upm_platform_data *plat);
+};
+#endif
diff --git a/arch/ppc/mach-mpc8xxx/include/mach/ppc_asm.tmpl b/arch/ppc/mach-mpc8xxx/include/mach/ppc_asm.tmpl
new file mode 100644
index 0000000..c7f0237
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/include/mach/ppc_asm.tmpl
@@ -0,0 +1,299 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file contains all the macros and symbols which define
+ * a PowerPC assembly language environment.
+ */
+#ifndef __PPC_ASM_TMPL__
+#define __PPC_ASM_TMPL__
+
+/***************************************************************************
+ *
+ * These definitions simplify the ugly declarations necessary for GOT
+ * definitions.
+ *
+ * Stolen from prepboot/bootldr.h, (C) 1998 Gabriel Paubert, paubert@iram.es
+ *
+ * Uses r12 to access the GOT
+ */
+
+#define START_GOT \
+ .section ".got2","aw"; \
+.LCTOC1 = .+32768
+
+#define END_GOT \
+ .text
+
+#define GET_GOT \
+ bl 1f ; \
+ .text 2 ; \
+0: .long .LCTOC1-1f ; \
+ .text ; \
+1: mflr r12 ; \
+ lwz r0,0b-1b(r12) ; \
+ add r12,r0,r12 ;
+
+#define GOT_ENTRY(NAME) .L_ ## NAME = . - .LCTOC1 ; .long NAME
+
+#define GOT(NAME) .L_ ## NAME (r12)
+
+
+/***************************************************************************
+ * Register names
+ */
+#define r0 0
+#define r1 1
+#define r2 2
+#define r3 3
+#define r4 4
+#define r5 5
+#define r6 6
+#define r7 7
+#define r8 8
+#define r9 9
+#define r10 10
+#define r11 11
+#define r12 12
+#define r13 13
+#define r14 14
+#define r15 15
+#define r16 16
+#define r17 17
+#define r18 18
+#define r19 19
+#define r20 20
+#define r21 21
+#define r22 22
+#define r23 23
+#define r24 24
+#define r25 25
+#define r26 26
+#define r27 27
+#define r28 28
+#define r29 29
+#define r30 30
+#define r31 31
+
+
+#if defined(CONFIG_8xx) || defined(CONFIG_MPC824X)
+
+/* Some special registers */
+
+#define ICR 148 /* Interrupt Cause Register (37-44) */
+#define DER 149
+#define COUNTA 150 /* Breakpoint Counter (37-44) */
+#define COUNTB 151 /* Breakpoint Counter (37-44) */
+#define LCTRL1 156 /* Load/Store Support (37-40) */
+#define LCTRL2 157 /* Load/Store Support (37-41) */
+#define ICTRL 158
+
+#endif /* CONFIG_8xx, CONFIG_MPC824X */
+
+
+#if defined(CONFIG_5xx)
+/* Some special purpose registers */
+#define DER 149 /* Debug Enable Register */
+#define COUNTA 150 /* Breakpoint Counter */
+#define COUNTB 151 /* Breakpoint Counter */
+#define LCTRL1 156 /* Load/Store Support */
+#define LCTRL2 157 /* Load/Store Support */
+#define ICTRL 158 /* I-Bus Support Control Register */
+#define EID 81
+#endif /* CONFIG_5xx */
+
+#if defined(CONFIG_8xx)
+
+/* Registers in the processor's internal memory map that we use.
+*/
+#define SYPCR 0x00000004
+#define BR0 0x00000100
+#define OR0 0x00000104
+#define BR1 0x00000108
+#define OR1 0x0000010c
+#define BR2 0x00000110
+#define OR2 0x00000114
+#define BR3 0x00000118
+#define OR3 0x0000011c
+#define BR4 0x00000120
+#define OR4 0x00000124
+
+#define MAR 0x00000164
+#define MCR 0x00000168
+#define MAMR 0x00000170
+#define MBMR 0x00000174
+#define MSTAT 0x00000178
+#define MPTPR 0x0000017a
+#define MDR 0x0000017c
+
+#define TBSCR 0x00000200
+#define TBREFF0 0x00000204
+
+#define PLPRCR 0x00000284
+
+#elif defined(CONFIG_8260)
+
+#define HID2 1011
+
+#define HID0_IFEM (1<<7)
+
+#define HID0_ICE_BITPOS 16
+#define HID0_DCE_BITPOS 17
+
+#define IM_REGBASE 0x10000
+#define IM_SYPCR (IM_REGBASE+0x0004)
+#define IM_SWSR (IM_REGBASE+0x000e)
+#define IM_BR0 (IM_REGBASE+0x0100)
+#define IM_OR0 (IM_REGBASE+0x0104)
+#define IM_BR1 (IM_REGBASE+0x0108)
+#define IM_OR1 (IM_REGBASE+0x010c)
+#define IM_BR2 (IM_REGBASE+0x0110)
+#define IM_OR2 (IM_REGBASE+0x0114)
+#define IM_MPTPR (IM_REGBASE+0x0184)
+#define IM_PSDMR (IM_REGBASE+0x0190)
+#define IM_PSRT (IM_REGBASE+0x019c)
+#define IM_IMMR (IM_REGBASE+0x01a8)
+#define IM_SCCR (IM_REGBASE+0x0c80)
+
+#elif defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC8220)
+
+#define HID0_ICE_BITPOS 16
+#define HID0_DCE_BITPOS 17
+
+#endif
+
+#define curptr r2
+
+#define SYNC \
+ sync; \
+ isync
+
+/*
+ * Macros for storing registers into and loading registers from
+ * exception frames.
+ */
+#define SAVE_GPR(n, base) stw n,GPR0+4*(n)(base)
+#define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base)
+#define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
+#define SAVE_8GPRS(n, base) SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
+#define SAVE_10GPRS(n, base) SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base)
+#define REST_GPR(n, base) lwz n,GPR0+4*(n)(base)
+#define REST_2GPRS(n, base) REST_GPR(n, base); REST_GPR(n+1, base)
+#define REST_4GPRS(n, base) REST_2GPRS(n, base); REST_2GPRS(n+2, base)
+#define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base)
+#define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base)
+
+/*
+ * GCC sometimes accesses words at negative offsets from the stack
+ * pointer, although the SysV ABI says it shouldn't. To cope with
+ * this, we leave this much untouched space on the stack on exception
+ * entry.
+ */
+#define STACK_UNDERHEAD 64
+
+/*
+ * Exception entry code. This code runs with address translation
+ * turned off, i.e. using physical addresses.
+ * We assume sprg3 has the physical address of the current
+ * task's thread_struct.
+ */
+#define EXCEPTION_PROLOG(reg1, reg2) \
+ mtspr SPRG0,r20; \
+ mtspr SPRG1,r21; \
+ mfcr r20; \
+ subi r21,r1,INT_FRAME_SIZE+STACK_UNDERHEAD; /* alloc exc. frame */\
+ stw r20,_CCR(r21); /* save registers */ \
+ stw r22,GPR22(r21); \
+ stw r23,GPR23(r21); \
+ mfspr r20,SPRG0; \
+ stw r20,GPR20(r21); \
+ mfspr r22,SPRG1; \
+ stw r22,GPR21(r21); \
+ mflr r20; \
+ stw r20,_LINK(r21); \
+ mfctr r22; \
+ stw r22,_CTR(r21); \
+ mfspr r20,XER; \
+ stw r20,_XER(r21); \
+ mfspr r20, DAR_DEAR; \
+ stw r20,_DAR(r21); \
+ mfspr r22,reg1; \
+ mfspr r23,reg2; \
+ stw r0,GPR0(r21); \
+ stw r1,GPR1(r21); \
+ stw r2,GPR2(r21); \
+ stw r1,0(r21); \
+ mr r1,r21; /* set new kernel sp */ \
+ SAVE_4GPRS(3, r21);
+/*
+ * Note: code which follows this uses cr0.eq (set if from kernel),
+ * r21, r22 (SRR0), and r23 (SRR1).
+ */
+
+/*
+ * Exception vectors.
+ *
+ * The data words for `hdlr' and `int_return' are initialized with
+ * OFFSET values only; they must be relocated first before they can
+ * be used!
+ */
+#define COPY_EE(d, s) rlwimi d,s,0,16,16
+#define NOCOPY(d, s)
+#define EXC_XFER_TEMPLATE(label, hdlr, msr, copyee) \
+ bl 1f; \
+1: mflr r20; \
+ lwz r20,(.L_ ## label)-1b+8(r20); \
+ mtlr r20; \
+ li r20,msr; \
+ copyee(r20,r23); \
+ rlwimi r20,r23,0,25,25; \
+ blrl; \
+.L_ ## label : \
+ .long hdlr - _start + _START_OFFSET; \
+ .long int_return - _start + _START_OFFSET; \
+ .long transfer_to_handler - _start + _START_OFFSET
+
+#define STD_EXCEPTION(n, label, hdlr) \
+ . = n; \
+label: \
+ EXCEPTION_PROLOG(SRR0, SRR1); \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ EXC_XFER_TEMPLATE(label, hdlr, MSR_KERNEL, NOCOPY) \
+
+#define CRIT_EXCEPTION(n, label, hdlr) \
+ . = n; \
+label: \
+ EXCEPTION_PROLOG(CSRR0, CSRR1); \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ EXC_XFER_TEMPLATE(label, hdlr, \
+ MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE), NOCOPY) \
+
+#define MCK_EXCEPTION(n, label, hdlr) \
+ . = n; \
+label: \
+ EXCEPTION_PROLOG(MCSRR0, MCSRR1); \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ EXC_XFER_TEMPLATE(label, hdlr, \
+ MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE), NOCOPY) \
+
+#endif /* __PPC_ASM_TMPL__ */
diff --git a/arch/ppc/mach-mpc8xxx/include/mach/tsec.h b/arch/ppc/mach-mpc8xxx/include/mach/tsec.h
new file mode 100644
index 0000000..17b5483
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/include/mach/tsec.h
@@ -0,0 +1,664 @@
+/*
+ * tsec.h
+ *
+ * Driver for the Motorola Triple Speed Ethernet Controller
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * Copyright 2004, 2007, 2009 Freescale Semiconductor, Inc.
+ * (C) Copyright 2003, Motorola, Inc.
+ * maintained by Xianghua Xiao (x.xiao@motorola.com)
+ * author Andy Fleming
+ *
+ */
+
+#ifndef __TSEC_H
+#define __TSEC_H
+
+#include <net.h>
+#include <config.h>
+
+#define TSEC_SIZE 0x01000
+#define TSEC_MDIO_OFFSET 0x01000
+
+#define STD_TSEC_INFO(num) \
+{ \
+ .regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)), \
+ .miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR), \
+ .miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR \
+ + (num - 1) * TSEC_MDIO_OFFSET), \
+ .devname = CONFIG_TSEC##num##_NAME, \
+ .phyaddr = TSEC##num##_PHY_ADDR, \
+ .flags = TSEC##num##_FLAGS \
+}
+
+#define SET_STD_TSEC_INFO(x, num) \
+{ \
+ x.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)); \
+ x.miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR); \
+ x.miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR \
+ + (num - 1) * TSEC_MDIO_OFFSET); \
+ x.devname = CONFIG_TSEC##num##_NAME; \
+ x.phyaddr = TSEC##num##_PHY_ADDR; \
+ x.flags = TSEC##num##_FLAGS;\
+}
+
+#define MAC_ADDR_LEN 6
+
+/* #define TSEC_TIMEOUT 1000000 */
+#define TSEC_TIMEOUT 1000
+#define TOUT_LOOP 1000000
+
+#define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* in ms */
+
+/* TBI register addresses */
+#define TBI_CR 0x00
+#define TBI_SR 0x01
+#define TBI_ANA 0x04
+#define TBI_ANLPBPA 0x05
+#define TBI_ANEX 0x06
+#define TBI_TBICON 0x11
+
+/* TBI MDIO register bit fields*/
+#define TBICON_CLK_SELECT 0x0020
+#define TBIANA_ASYMMETRIC_PAUSE 0x0100
+#define TBIANA_SYMMETRIC_PAUSE 0x0080
+#define TBIANA_HALF_DUPLEX 0x0040
+#define TBIANA_FULL_DUPLEX 0x0020
+/* The two reserved magic bits below are used in AN3869 to enable SGMII. */
+#define TBIANA_RESERVED1 0x4000
+#define TBIANA_RESERVED15 0x0001
+#define TBICR_PHY_RESET 0x8000
+#define TBICR_ANEG_ENABLE 0x1000
+#define TBICR_RESTART_ANEG 0x0200
+#define TBICR_FULL_DUPLEX 0x0100
+#define TBICR_SPEED1_SET 0x0040
+
+
+/* MAC register bits */
+#define MACCFG1_SOFT_RESET 0x80000000
+#define MACCFG1_RESET_RX_MC 0x00080000
+#define MACCFG1_RESET_TX_MC 0x00040000
+#define MACCFG1_RESET_RX_FUN 0x00020000
+#define MACCFG1_RESET_TX_FUN 0x00010000
+#define MACCFG1_LOOPBACK 0x00000100
+#define MACCFG1_RX_FLOW 0x00000020
+#define MACCFG1_TX_FLOW 0x00000010
+#define MACCFG1_SYNCD_RX_EN 0x00000008
+#define MACCFG1_RX_EN 0x00000004
+#define MACCFG1_SYNCD_TX_EN 0x00000002
+#define MACCFG1_TX_EN 0x00000001
+
+#define MACCFG2_INIT_SETTINGS 0x00007205
+#define MACCFG2_FULL_DUPLEX 0x00000001
+#define MACCFG2_IF 0x00000300
+#define MACCFG2_GMII 0x00000200
+#define MACCFG2_MII 0x00000100
+
+#define ECNTRL_INIT_SETTINGS 0x00001000
+#define ECNTRL_TBI_MODE 0x00000020
+#define ECNTRL_R100 0x00000008
+#define ECNTRL_SGMII_MODE 0x00000002
+
+#define miim_end -2
+#define miim_read -1
+
+#ifndef CONFIG_SYS_TBIPA_VALUE
+ #define CONFIG_SYS_TBIPA_VALUE 0x1f
+#endif
+#define MIIMCFG_INIT_VALUE 0x00000003
+#define MIIMCFG_RESET 0x80000000
+
+#define MIIMIND_BUSY 0x00000001
+#define MIIMIND_NOTVALID 0x00000004
+
+#define MIIM_CONTROL 0x00
+#define MIIM_CONTROL_RESET 0x00009140
+#define MIIM_CONTROL_INIT 0x00001140
+#define MIIM_CONTROL_RESTART 0x00001340
+#define MIIM_ANEN 0x00001000
+
+#define MIIM_CR 0x00
+#define MIIM_CR_RST 0x00008000
+#define MIIM_CR_INIT 0x00001000
+
+#define MIIM_STATUS 0x1
+#define MIIM_STATUS_AN_DONE 0x00000020
+#define MIIM_STATUS_LINK 0x0004
+
+#define MIIM_PHYIR1 0x2
+#define MIIM_PHYIR2 0x3
+
+#define MIIM_ANAR 0x4
+#define MIIM_ANAR_INIT 0x1e1
+
+#define MIIM_TBI_ANLPBPA 0x5
+#define MIIM_TBI_ANLPBPA_HALF 0x00000040
+#define MIIM_TBI_ANLPBPA_FULL 0x00000020
+
+#define MIIM_TBI_ANEX 0x6
+#define MIIM_TBI_ANEX_NP 0x00000004
+#define MIIM_TBI_ANEX_PRX 0x00000002
+
+#define MIIM_GBIT_CONTROL 0x9
+#define MIIM_GBIT_CONTROL_INIT 0xe00
+
+#define MIIM_EXT_PAGE_ACCESS 0x1f
+
+/* Broadcom BCM54xx -- taken from linux sungem_phy */
+#define MIIM_BCM54xx_AUXCNTL 0x18
+#define MIIM_BCM54xx_AUXCNTL_ENCODE(val) ((val & 0x7) << 12)|(val & 0x7)
+#define MIIM_BCM54xx_AUXSTATUS 0x19
+#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK 0x0700
+#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8
+
+#define MIIM_BCM54XX_SHD 0x1c /* 0x1c shadow registers */
+#define MIIM_BCM54XX_SHD_WRITE 0x8000
+#define MIIM_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10)
+#define MIIM_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0)
+#define MIIM_BCM54XX_SHD_WR_ENCODE(val, data) \
+ (MIIM_BCM54XX_SHD_WRITE | MIIM_BCM54XX_SHD_VAL(val) | \
+ MIIM_BCM54XX_SHD_DATA(data))
+
+#define MIIM_BCM54XX_EXP_DATA 0x15 /* Expansion register data */
+#define MIIM_BCM54XX_EXP_SEL 0x17 /* Expansion register select */
+#define MIIM_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */
+#define MIIM_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */
+
+/* Cicada Auxiliary Control/Status Register */
+#define MIIM_CIS8201_AUX_CONSTAT 0x1c
+#define MIIM_CIS8201_AUXCONSTAT_INIT 0x0004
+#define MIIM_CIS8201_AUXCONSTAT_DUPLEX 0x0020
+#define MIIM_CIS8201_AUXCONSTAT_SPEED 0x0018
+#define MIIM_CIS8201_AUXCONSTAT_GBIT 0x0010
+#define MIIM_CIS8201_AUXCONSTAT_100 0x0008
+
+/* Cicada Extended Control Register 1 */
+#define MIIM_CIS8201_EXT_CON1 0x17
+#define MIIM_CIS8201_EXTCON1_INIT 0x0000
+
+/* Cicada 8204 Extended PHY Control Register 1 */
+#define MIIM_CIS8204_EPHY_CON 0x17
+#define MIIM_CIS8204_EPHYCON_INIT 0x0006
+#define MIIM_CIS8204_EPHYCON_RGMII 0x1100
+
+/* Cicada 8204 Serial LED Control Register */
+#define MIIM_CIS8204_SLED_CON 0x1b
+#define MIIM_CIS8204_SLEDCON_INIT 0x1115
+
+#define MIIM_GBIT_CON 0x09
+#define MIIM_GBIT_CON_ADVERT 0x0e00
+
+/* Entry for Vitesse VSC8244 regs starts here */
+/* Vitesse VSC8244 Auxiliary Control/Status Register */
+#define MIIM_VSC8244_AUX_CONSTAT 0x1c
+#define MIIM_VSC8244_AUXCONSTAT_INIT 0x0000
+#define MIIM_VSC8244_AUXCONSTAT_DUPLEX 0x0020
+#define MIIM_VSC8244_AUXCONSTAT_SPEED 0x0018
+#define MIIM_VSC8244_AUXCONSTAT_GBIT 0x0010
+#define MIIM_VSC8244_AUXCONSTAT_100 0x0008
+#define MIIM_CONTROL_INIT_LOOPBACK 0x4000
+
+/* Vitesse VSC8244 Extended PHY Control Register 1 */
+#define MIIM_VSC8244_EPHY_CON 0x17
+#define MIIM_VSC8244_EPHYCON_INIT 0x0006
+
+/* Vitesse VSC8244 Serial LED Control Register */
+#define MIIM_VSC8244_LED_CON 0x1b
+#define MIIM_VSC8244_LEDCON_INIT 0xF011
+
+/* Entry for Vitesse VSC8601 regs starts here (Not complete) */
+/* Vitesse VSC8601 Extended PHY Control Register 1 */
+#define MIIM_VSC8601_EPHY_CON 0x17
+#define MIIM_VSC8601_EPHY_CON_INIT_SKEW 0x1120
+#define MIIM_VSC8601_SKEW_CTRL 0x1c
+
+/* 88E1011 PHY Status Register */
+#define MIIM_88E1011_PHY_STATUS 0x11
+#define MIIM_88E1011_PHYSTAT_SPEED 0xc000
+#define MIIM_88E1011_PHYSTAT_GBIT 0x8000
+#define MIIM_88E1011_PHYSTAT_100 0x4000
+#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000
+#define MIIM_88E1011_PHYSTAT_SPDDONE 0x0800
+#define MIIM_88E1011_PHYSTAT_LINK 0x0400
+
+#define MIIM_88E1011_PHY_SCR 0x10
+#define MIIM_88E1011_PHY_MDI_X_AUTO 0x0060
+
+/* 88E1111 PHY LED Control Register */
+#define MIIM_88E1111_PHY_LED_CONTROL 24
+#define MIIM_88E1111_PHY_LED_DIRECT 0x4100
+#define MIIM_88E1111_PHY_LED_COMBINE 0x411C
+
+/* 88E1121 PHY LED Control Register */
+#define MIIM_88E1121_PHY_LED_CTRL 16
+#define MIIM_88E1121_PHY_LED_PAGE 3
+#define MIIM_88E1121_PHY_LED_DEF 0x0030
+
+/* 88E1121 PHY IRQ Enable/Status Register */
+#define MIIM_88E1121_PHY_IRQ_EN 18
+#define MIIM_88E1121_PHY_IRQ_STATUS 19
+
+#define MIIM_88E1121_PHY_PAGE 22
+
+/* 88E1145 Extended PHY Specific Control Register */
+#define MIIM_88E1145_PHY_EXT_CR 20
+#define MIIM_M88E1145_RGMII_RX_DELAY 0x0080
+#define MIIM_M88E1145_RGMII_TX_DELAY 0x0002
+
+#define MIIM_88E1145_PHY_PAGE 29
+#define MIIM_88E1145_PHY_CAL_OV 30
+
+/* RTL8211B PHY Status Register */
+#define MIIM_RTL8211B_PHY_STATUS 0x11
+#define MIIM_RTL8211B_PHYSTAT_SPEED 0xc000
+#define MIIM_RTL8211B_PHYSTAT_GBIT 0x8000
+#define MIIM_RTL8211B_PHYSTAT_100 0x4000
+#define MIIM_RTL8211B_PHYSTAT_DUPLEX 0x2000
+#define MIIM_RTL8211B_PHYSTAT_SPDDONE 0x0800
+#define MIIM_RTL8211B_PHYSTAT_LINK 0x0400
+
+/* DM9161 Control register values */
+#define MIIM_DM9161_CR_STOP 0x0400
+#define MIIM_DM9161_CR_RSTAN 0x1200
+
+#define MIIM_DM9161_SCR 0x10
+#define MIIM_DM9161_SCR_INIT 0x0610
+
+/* DM9161 Specified Configuration and Status Register */
+#define MIIM_DM9161_SCSR 0x11
+#define MIIM_DM9161_SCSR_100F 0x8000
+#define MIIM_DM9161_SCSR_100H 0x4000
+#define MIIM_DM9161_SCSR_10F 0x2000
+#define MIIM_DM9161_SCSR_10H 0x1000
+
+/* DM9161 10BT Configuration/Status */
+#define MIIM_DM9161_10BTCSR 0x12
+#define MIIM_DM9161_10BTCSR_INIT 0x7800
+
+/* LXT971 Status 2 registers */
+#define MIIM_LXT971_SR2 0x11 /* Status Register 2 */
+#define MIIM_LXT971_SR2_SPEED_MASK 0x4200
+#define MIIM_LXT971_SR2_10HDX 0x0000 /* 10 Mbit half duplex selected */
+#define MIIM_LXT971_SR2_10FDX 0x0200 /* 10 Mbit full duplex selected */
+#define MIIM_LXT971_SR2_100HDX 0x4000 /* 100 Mbit half duplex selected */
+#define MIIM_LXT971_SR2_100FDX 0x4200 /* 100 Mbit full duplex selected */
+
+/* DP83865 Control register values */
+#define MIIM_DP83865_CR_INIT 0x9200
+
+/* DP83865 Link and Auto-Neg Status Register */
+#define MIIM_DP83865_LANR 0x11
+#define MIIM_DP83865_SPD_MASK 0x0018
+#define MIIM_DP83865_SPD_1000 0x0010
+#define MIIM_DP83865_SPD_100 0x0008
+#define MIIM_DP83865_DPX_FULL 0x0002
+
+#define MIIM_READ_COMMAND 0x00000001
+
+#define MRBLR_INIT_SETTINGS PKTSIZE_ALIGN
+
+#define MINFLR_INIT_SETTINGS 0x00000040
+
+#define DMACTRL_INIT_SETTINGS 0x000000c3
+#define DMACTRL_GRS 0x00000010
+#define DMACTRL_GTS 0x00000008
+
+#define TSTAT_CLEAR_THALT 0x80000000
+#define RSTAT_CLEAR_RHALT 0x00800000
+
+
+#define IEVENT_INIT_CLEAR 0xffffffff
+#define IEVENT_BABR 0x80000000
+#define IEVENT_RXC 0x40000000
+#define IEVENT_BSY 0x20000000
+#define IEVENT_EBERR 0x10000000
+#define IEVENT_MSRO 0x04000000
+#define IEVENT_GTSC 0x02000000
+#define IEVENT_BABT 0x01000000
+#define IEVENT_TXC 0x00800000
+#define IEVENT_TXE 0x00400000
+#define IEVENT_TXB 0x00200000
+#define IEVENT_TXF 0x00100000
+#define IEVENT_IE 0x00080000
+#define IEVENT_LC 0x00040000
+#define IEVENT_CRL 0x00020000
+#define IEVENT_XFUN 0x00010000
+#define IEVENT_RXB0 0x00008000
+#define IEVENT_GRSC 0x00000100
+#define IEVENT_RXF0 0x00000080
+
+#define IMASK_INIT_CLEAR 0x00000000
+#define IMASK_TXEEN 0x00400000
+#define IMASK_TXBEN 0x00200000
+#define IMASK_TXFEN 0x00100000
+#define IMASK_RXFEN0 0x00000080
+
+
+/* Default Attribute fields */
+#define ATTR_INIT_SETTINGS 0x000000c0
+#define ATTRELI_INIT_SETTINGS 0x00000000
+
+
+/* TxBD status field bits */
+#define TXBD_READY 0x8000
+#define TXBD_PADCRC 0x4000
+#define TXBD_WRAP 0x2000
+#define TXBD_INTERRUPT 0x1000
+#define TXBD_LAST 0x0800
+#define TXBD_CRC 0x0400
+#define TXBD_DEF 0x0200
+#define TXBD_HUGEFRAME 0x0080
+#define TXBD_LATECOLLISION 0x0080
+#define TXBD_RETRYLIMIT 0x0040
+#define TXBD_RETRYCOUNTMASK 0x003c
+#define TXBD_UNDERRUN 0x0002
+#define TXBD_STATS 0x03ff
+
+/* RxBD status field bits */
+#define RXBD_EMPTY 0x8000
+#define RXBD_RO1 0x4000
+#define RXBD_WRAP 0x2000
+#define RXBD_INTERRUPT 0x1000
+#define RXBD_LAST 0x0800
+#define RXBD_FIRST 0x0400
+#define RXBD_MISS 0x0100
+#define RXBD_BROADCAST 0x0080
+#define RXBD_MULTICAST 0x0040
+#define RXBD_LARGE 0x0020
+#define RXBD_NONOCTET 0x0010
+#define RXBD_SHORT 0x0008
+#define RXBD_CRCERR 0x0004
+#define RXBD_OVERRUN 0x0002
+#define RXBD_TRUNCATED 0x0001
+#define RXBD_STATS 0x003f
+
+typedef struct txbd8
+{
+ ushort status; /* Status Fields */
+ ushort length; /* Buffer length */
+ uint bufPtr; /* Buffer Pointer */
+} txbd8_t;
+
+typedef struct rxbd8
+{
+ ushort status; /* Status Fields */
+ ushort length; /* Buffer Length */
+ uint bufPtr; /* Buffer Pointer */
+} rxbd8_t;
+
+typedef struct rmon_mib
+{
+ /* Transmit and Receive Counters */
+ uint tr64; /* Transmit and Receive 64-byte Frame Counter */
+ uint tr127; /* Transmit and Receive 65-127 byte Frame Counter */
+ uint tr255; /* Transmit and Receive 128-255 byte Frame Counter */
+ uint tr511; /* Transmit and Receive 256-511 byte Frame Counter */
+ uint tr1k; /* Transmit and Receive 512-1023 byte Frame Counter */
+ uint trmax; /* Transmit and Receive 1024-1518 byte Frame Counter */
+ uint trmgv; /* Transmit and Receive 1519-1522 byte Good VLAN Frame */
+ /* Receive Counters */
+ uint rbyt; /* Receive Byte Counter */
+ uint rpkt; /* Receive Packet Counter */
+ uint rfcs; /* Receive FCS Error Counter */
+ uint rmca; /* Receive Multicast Packet (Counter) */
+ uint rbca; /* Receive Broadcast Packet */
+ uint rxcf; /* Receive Control Frame Packet */
+ uint rxpf; /* Receive Pause Frame Packet */
+ uint rxuo; /* Receive Unknown OP Code */
+ uint raln; /* Receive Alignment Error */
+ uint rflr; /* Receive Frame Length Error */
+ uint rcde; /* Receive Code Error */
+ uint rcse; /* Receive Carrier Sense Error */
+ uint rund; /* Receive Undersize Packet */
+ uint rovr; /* Receive Oversize Packet */
+ uint rfrg; /* Receive Fragments */
+ uint rjbr; /* Receive Jabber */
+ uint rdrp; /* Receive Drop */
+ /* Transmit Counters */
+ uint tbyt; /* Transmit Byte Counter */
+ uint tpkt; /* Transmit Packet */
+ uint tmca; /* Transmit Multicast Packet */
+ uint tbca; /* Transmit Broadcast Packet */
+ uint txpf; /* Transmit Pause Control Frame */
+ uint tdfr; /* Transmit Deferral Packet */
+ uint tedf; /* Transmit Excessive Deferral Packet */
+ uint tscl; /* Transmit Single Collision Packet */
+ /* (0x2_n700) */
+ uint tmcl; /* Transmit Multiple Collision Packet */
+ uint tlcl; /* Transmit Late Collision Packet */
+ uint txcl; /* Transmit Excessive Collision Packet */
+ uint tncl; /* Transmit Total Collision */
+
+ uint res2;
+
+ uint tdrp; /* Transmit Drop Frame */
+ uint tjbr; /* Transmit Jabber Frame */
+ uint tfcs; /* Transmit FCS Error */
+ uint txcf; /* Transmit Control Frame */
+ uint tovr; /* Transmit Oversize Frame */
+ uint tund; /* Transmit Undersize Frame */
+ uint tfrg; /* Transmit Fragments Frame */
+ /* General Registers */
+ uint car1; /* Carry Register One */
+ uint car2; /* Carry Register Two */
+ uint cam1; /* Carry Register One Mask */
+ uint cam2; /* Carry Register Two Mask */
+} rmon_mib_t;
+
+typedef struct tsec_hash_regs
+{
+ uint iaddr0; /* Individual Address Register 0 */
+ uint iaddr1; /* Individual Address Register 1 */
+ uint iaddr2; /* Individual Address Register 2 */
+ uint iaddr3; /* Individual Address Register 3 */
+ uint iaddr4; /* Individual Address Register 4 */
+ uint iaddr5; /* Individual Address Register 5 */
+ uint iaddr6; /* Individual Address Register 6 */
+ uint iaddr7; /* Individual Address Register 7 */
+ uint res1[24];
+ uint gaddr0; /* Group Address Register 0 */
+ uint gaddr1; /* Group Address Register 1 */
+ uint gaddr2; /* Group Address Register 2 */
+ uint gaddr3; /* Group Address Register 3 */
+ uint gaddr4; /* Group Address Register 4 */
+ uint gaddr5; /* Group Address Register 5 */
+ uint gaddr6; /* Group Address Register 6 */
+ uint gaddr7; /* Group Address Register 7 */
+ uint res2[24];
+} tsec_hash_t;
+
+typedef struct tsec_mdio {
+ uint res1[4];
+ uint ieventm;
+ uint imaskm;
+ uint res2;
+ uint emapm;
+ uint res3[320];
+ uint miimcfg; /* MII Management: Configuration */
+ uint miimcom; /* MII Management: Command */
+ uint miimadd; /* MII Management: Address */
+ uint miimcon; /* MII Management: Control */
+ uint miimstat; /* MII Management: Status */
+ uint miimind; /* MII Management: Indicators */
+ uint res4[690];
+} tsec_mdio_t;
+
+typedef struct tsec
+{
+ /* General Control and Status Registers (0x2_n000) */
+ uint res000[4];
+
+ uint ievent; /* Interrupt Event */
+ uint imask; /* Interrupt Mask */
+ uint edis; /* Error Disabled */
+ uint res01c;
+ uint ecntrl; /* Ethernet Control */
+ uint minflr; /* Minimum Frame Length */
+ uint ptv; /* Pause Time Value */
+ uint dmactrl; /* DMA Control */
+ uint tbipa; /* TBI PHY Address */
+
+ uint res034[3];
+ uint res040[48];
+
+ /* Transmit Control and Status Registers (0x2_n100) */
+ uint tctrl; /* Transmit Control */
+ uint tstat; /* Transmit Status */
+ uint res108;
+ uint tbdlen; /* Tx BD Data Length */
+ uint res110[5];
+ uint ctbptr; /* Current TxBD Pointer */
+ uint res128[23];
+ uint tbptr; /* TxBD Pointer */
+ uint res188[30];
+ /* (0x2_n200) */
+ uint res200;
+ uint tbase; /* TxBD Base Address */
+ uint res208[42];
+ uint ostbd; /* Out of Sequence TxBD */
+ uint ostbdp; /* Out of Sequence Tx Data Buffer Pointer */
+ uint res2b8[18];
+
+ /* Receive Control and Status Registers (0x2_n300) */
+ uint rctrl; /* Receive Control */
+ uint rstat; /* Receive Status */
+ uint res308;
+ uint rbdlen; /* RxBD Data Length */
+ uint res310[4];
+ uint res320;
+ uint crbptr; /* Current Receive Buffer Pointer */
+ uint res328[6];
+ uint mrblr; /* Maximum Receive Buffer Length */
+ uint res344[16];
+ uint rbptr; /* RxBD Pointer */
+ uint res388[30];
+ /* (0x2_n400) */
+ uint res400;
+ uint rbase; /* RxBD Base Address */
+ uint res408[62];
+
+ /* MAC Registers (0x2_n500) */
+ uint maccfg1; /* MAC Configuration #1 */
+ uint maccfg2; /* MAC Configuration #2 */
+ uint ipgifg; /* Inter Packet Gap/Inter Frame Gap */
+ uint hafdup; /* Half-duplex */
+ uint maxfrm; /* Maximum Frame */
+ uint res514;
+ uint res518;
+
+ uint res51c;
+
+ uint resmdio[6];
+
+ uint res538;
+
+ uint ifstat; /* Interface Status */
+ uint macstnaddr1; /* Station Address, part 1 */
+ uint macstnaddr2; /* Station Address, part 2 */
+ uint res548[46];
+
+ /* (0x2_n600) */
+ uint res600[32];
+
+ /* RMON MIB Registers (0x2_n680-0x2_n73c) */
+ rmon_mib_t rmon;
+ uint res740[48];
+
+ /* Hash Function Registers (0x2_n800) */
+ tsec_hash_t hash;
+
+ uint res900[128];
+
+ /* Pattern Registers (0x2_nb00) */
+ uint resb00[62];
+ uint attr; /* Default Attribute Register */
+ uint attreli; /* Default Attribute Extract Length and Index */
+
+ /* TSEC Future Expansion Space (0x2_nc00-0x2_nffc) */
+ uint resc00[256];
+} tsec_t;
+
+#define TSEC_GIGABIT (1)
+
+/* This flag currently only has
+ * meaning if we're using the eTSEC */
+#define TSEC_REDUCED (1 << 1) /* MAC-PHY interface uses RGMII */
+#define TSEC_SGMII (1 << 2) /* MAC-PHY interface uses SGMII */
+#define TSEC_FIBER (1 << 3) /* PHY uses fiber, eg 1000 Base-X */
+
+struct tsec_private {
+ volatile tsec_t *regs;
+ volatile tsec_mdio_t *phyregs;
+ volatile tsec_mdio_t *phyregs_sgmii;
+ struct phy_info *phyinfo;
+ struct mii_device miidev;
+ uint phyaddr;
+ u32 flags;
+ uint link;
+ uint duplexity;
+ uint speed;
+};
+
+
+/*
+ * struct phy_cmd: A command for reading or writing a PHY register
+ *
+ * mii_reg: The register to read or write
+ *
+ * mii_data: For writes, the value to put in the register.
+ * A value of -1 indicates this is a read.
+ *
+ * funct: A function pointer which is invoked for each command.
+ * For reads, this function will be passed the value read
+ * from the PHY, and process it.
+ * For writes, the result of this function will be written
+ * to the PHY register
+ */
+struct phy_cmd {
+ uint mii_reg;
+ uint mii_data;
+ uint (*funct) (uint mii_reg, struct tsec_private * priv);
+};
+
+/* struct phy_info: a structure which defines attributes for a PHY
+ *
+ * id will contain a number which represents the PHY. During
+ * startup, the driver will poll the PHY to find out what its
+ * UID--as defined by registers 2 and 3--is. The 32-bit result
+ * gotten from the PHY will be shifted right by "shift" bits to
+ * discard any bits which may change based on revision numbers
+ * unimportant to functionality
+ *
+ * The struct phy_cmd entries represent pointers to an arrays of
+ * commands which tell the driver what to do to the PHY.
+ */
+struct phy_info {
+ uint id;
+ char *name;
+ uint shift;
+ /* Called to configure the PHY, and modify the controller
+ * based on the results */
+ struct phy_cmd *config;
+
+ /* Called when starting up the controller */
+ struct phy_cmd *startup;
+
+ /* Called when bringing down the controller */
+ struct phy_cmd *shutdown;
+};
+
+struct tsec_info_struct {
+ tsec_t *regs;
+ tsec_mdio_t *miiregs;
+ tsec_mdio_t *miiregs_sgmii;
+ char *devname;
+ unsigned int phyaddr;
+ u32 flags;
+};
+
+int tsec_standard_init(bd_t *bis);
+
+#endif /* __TSEC_H */
diff --git a/arch/ppc/mach-mpc8xxx/include/mach/uart.h b/arch/ppc/mach-mpc8xxx/include/mach/uart.h
new file mode 100644
index 0000000..90e8a18
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/include/mach/uart.h
@@ -0,0 +1,38 @@
+/**
+ * @file
+ * @brief These Apis are MPC8xxx independent support functions
+ *
+ * FileName: arch/ppc/mach-mpc85xx/include/mach/uart.h
+ *
+ * Implemented by arch/ppc/mach-mpc85xx/uart.c
+ *
+ */
+/*
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_PPC_UART_H_
+#define __ASM_ARCH_PPC_UART_H_
+#include <asm/io.h>
+
+/** All architectures need to implement these */
+void mpc85xx_uart_write(unsigned int val, unsigned long base,
+ unsigned char reg_idx);
+unsigned int mpc85xx_uart_read(unsigned long base, unsigned char reg_idx);
+#endif /* __ASM_ARCH_PPC_UART_H_ */
diff --git a/arch/ppc/mach-mpc8xxx/io.S b/arch/ppc/mach-mpc8xxx/io.S
new file mode 100644
index 0000000..7190ae9
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/io.S
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (C) 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Andreas Heppel <aheppel@sysgo.de>
+ * Copyright (C) 2003 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/ppc_asm.tmpl>
+
+/* ------------------------------------------------------------------------------- */
+/* Function: in8 */
+/* Description: Input 8 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl in8
+in8:
+ lbz r3,0(r3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: in16 */
+/* Description: Input 16 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl in16
+in16:
+ lhz r3,0(r3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: in16r */
+/* Description: Input 16 bits and byte reverse */
+/* ------------------------------------------------------------------------------- */
+ .globl in16r
+in16r:
+ lhbrx r3,0,r3
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: in32 */
+/* Description: Input 32 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl in32
+in32:
+ lwz 3,0(3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: in32r */
+/* Description: Input 32 bits and byte reverse */
+/* ------------------------------------------------------------------------------- */
+ .globl in32r
+in32r:
+ lwbrx r3,0,r3
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: out8 */
+/* Description: Output 8 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl out8
+out8:
+ stb r4,0(r3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: out16 */
+/* Description: Output 16 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl out16
+out16:
+ sth r4,0(r3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: out16r */
+/* Description: Byte reverse and output 16 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl out16r
+out16r:
+ sthbrx r4,0,r3
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: out32 */
+/* Description: Output 32 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl out32
+out32:
+ stw r4,0(r3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: out32r */
+/* Description: Byte reverse and output 32 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl out32r
+out32r:
+ stwbrx r4,0,r3
+ sync
+ blr
diff --git a/arch/ppc/mach-mpc8xxx/mpc85xx/Makefile b/arch/ppc/mach-mpc8xxx/mpc85xx/Makefile
new file mode 100644
index 0000000..3aa48e3
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/mpc85xx/Makefile
@@ -0,0 +1,14 @@
+obj-y += cpu.o
+obj-y += cpu_init.o
+obj-y += cpu_init_early.o
+obj-y += tlb.o
+obj-y += speed.o
+obj-y += traps.o
+extra-y += start.o
+extra-y += resetvec.o
+obj-$(CONFIG_OF_FLAT_TREE) += fdt.o
+obj-$(CONFIG_USE_IRQ) += interrupts.o
+obj-$(CONFIG_MPC8544) += mpc8544_serdes.o
+obj-$(CONFIG_P2020) += p2020_serdes.o
+obj-$(CONFIG_MP) += mp.o
+obj-$(CONFIG_MP) += release.o
diff --git a/arch/ppc/mach-mpc8xxx/mpc85xx/cpu.c b/arch/ppc/mach-mpc8xxx/mpc85xx/cpu.c
new file mode 100644
index 0000000..18a0b6a
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/mpc85xx/cpu.c
@@ -0,0 +1,347 @@
+/*
+ * Copyright 2004,2007-2011 Freescale Semiconductor, Inc.
+ * (C) Copyright 2002, 2003 Motorola Inc.
+ * Xianghua Xiao (X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/config_mpc85xx.h>
+#include <asm/e500.h>
+#include <asm/common.h>
+#include <asm/config.h>
+#include <asm/global_data.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_lbc.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <mach/immap_85xx.h>
+
+
+/*DECLARE_GLOBAL_DATA_PTR; */
+
+
+int checkcpu (void)
+{
+ sys_info_t sysinfo;
+ uint pvr, svr;
+ uint fam;
+ uint ver;
+ uint major, minor;
+ struct cpu_type *cpu;
+ char buf1[32], buf2[32];
+#if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET)
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#endif /* CONFIG_FSL_CORENET */
+#ifdef CONFIG_DDR_CLK_FREQ
+ u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+ >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
+#else
+#ifdef CONFIG_FSL_CORENET
+ u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
+ >> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT;
+#else
+ u32 ddr_ratio = 0;
+#endif /* CONFIG_FSL_CORENET */
+#endif /* CONFIG_DDR_CLK_FREQ */
+ int i;
+
+ svr = get_svr();
+ major = SVR_MAJ(svr);
+ minor = SVR_MIN(svr);
+
+ if (cpu_numcores() > 1) {
+#ifndef CONFIG_MP
+ puts("Unicore software on multiprocessor system!!\n"
+ "To enable mutlticore build define CONFIG_MP\n");
+#endif
+ volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
+ printf("CPU%d: ", pic->whoami);
+ } else {
+ puts("CPU: ");
+ }
+
+
+ ver = SVR_SOC_VER(svr);
+ cpu = identify_cpu(ver);
+
+ puts(cpu->name);
+ if (IS_E_PROCESSOR(svr))
+ puts("E");
+
+ printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
+
+ pvr = get_pvr();
+ fam = PVR_FAM(pvr);
+ ver = PVR_VER(pvr);
+ major = PVR_MAJ(pvr);
+ minor = PVR_MIN(pvr);
+
+ printf("Core: ");
+ if (PVR_FAM(PVR_85xx)) {
+ switch(PVR_MEM(pvr)) {
+ case 0x1:
+ case 0x2:
+ puts("E500");
+ break;
+ case 0x3:
+ puts("E500MC");
+ break;
+ case 0x4:
+ puts("E5500");
+ break;
+ default:
+ puts("Unknown");
+ break;
+ }
+ } else {
+ puts("Unknown");
+ }
+
+ printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
+
+
+ get_sys_info(&sysinfo);
+
+ puts("Clock Configuration:");
+ for (i = 0; i < cpu_numcores(); i++) {
+ if (!(i & 3))
+ printf ("\n ");
+ printf("CPU%d:%-4s MHz, ",
+ i,strmhz(buf1, sysinfo.freqProcessor[i]));
+ }
+ printf("\n CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus));
+
+
+#ifdef CONFIG_FSL_CORENET
+ if (ddr_sync == 1) {
+ printf(" DDR:%-4s MHz (%s MT/s data rate) "
+ "(Synchronous), ",
+ strmhz(buf1, sysinfo.freqDDRBus/2),
+ strmhz(buf2, sysinfo.freqDDRBus));
+ } else {
+ printf(" DDR:%-4s MHz (%s MT/s data rate) "
+ "(Asynchronous), ",
+ strmhz(buf1, sysinfo.freqDDRBus/2),
+ strmhz(buf2, sysinfo.freqDDRBus));
+ }
+#else
+
+ switch (ddr_ratio) {
+ case 0x0:
+ printf(" DDR:%-4s MHz (%s MT/s data rate), ",
+ strmhz(buf1, sysinfo.freqDDRBus/2),
+ strmhz(buf2, sysinfo.freqDDRBus));
+ break;
+ case 0x7:
+ printf(" DDR:%-4s MHz (%s MT/s data rate) "
+ "(Synchronous), ",
+ strmhz(buf1, sysinfo.freqDDRBus/2),
+ strmhz(buf2, sysinfo.freqDDRBus));
+ break;
+ default:
+ printf(" DDR:%-4s MHz (%s MT/s data rate) "
+ "(Asynchronous), ",
+ strmhz(buf1, sysinfo.freqDDRBus/2),
+ strmhz(buf2, sysinfo.freqDDRBus));
+ break;
+ }
+#endif
+
+#if defined(CONFIG_FSL_LBC)
+ if (sysinfo.freqLocalBus > LCRR_CLKDIV) {
+ printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+ } else {
+ printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
+ sysinfo.freqLocalBus);
+ }
+#endif
+
+ puts("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n");
+
+ return 0;
+}
+
+int cpu_init_board_data(bd_t *bd)
+{
+ sys_info_t sysinfo;
+
+ get_sys_info(&sysinfo);
+ bd->bi_intfreq = sysinfo.freqProcessor[0]; /* This is only CPU 0. */
+#if 0
+ bd->bi_pcifreq = get_pci_clock();
+#endif
+ bd->bi_busfreq = sysinfo.freqSystemBus;; /* Bus Freq, in Hz */
+
+ bd->bi_memsize = get_effective_memsize();
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+void __noreturn reset_cpu(unsigned long addr)
+{
+/* Everything after the first generation of PQ3 parts has RSTCR */
+#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+ defined(CONFIG_MPC8555) || defined(CONFIG_MPC8560)
+ unsigned long val, msr;
+
+ /*
+ * Initiate hard reset in debug control register DBCR0
+ * Make sure MSR[DE] = 1. This only resets the core.
+ */
+ msr = mfmsr ();
+ msr |= MSR_DE;
+ mtmsr (msr);
+
+ val = mfspr(DBCR0);
+ val |= 0x70000000;
+ mtspr(DBCR0,val);
+#else
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ out_be32(&gur->rstcr, 0x2); /* HRESET_REQ */
+ udelay(100);
+#endif
+
+ while(1);
+}
+
+/*
+ * Get timebase clock frequency
+ */
+unsigned long get_timebase_clock (void)
+{
+ sys_info_t sys_info;
+
+ get_sys_info (&sys_info);
+
+#ifdef CONFIG_FSL_CORENET
+ return (sys_info.freqSystemBus + 8) / 16;
+#else
+ return (sys_info.freqSystemBus + 4UL)/8UL;
+#endif
+}
+
+
+#if defined(CONFIG_WATCHDOG)
+void
+reset_85xx_watchdog(void)
+{
+ /*
+ * Clear TSR(WIS) bit by writing 1
+ */
+ unsigned long val;
+ val = mfspr(SPRN_TSR);
+ val |= TSR_WIS;
+ val |= TSR_ENW;
+ mtspr(SPRN_TSR, val);
+}
+
+void
+watchdog_reset(void)
+{
+ int re_enable = disable_interrupts();
+ reset_85xx_watchdog();
+ if (re_enable) enable_interrupts();
+}
+
+#endif /* CONFIG_WATCHDOG */
+
+/*
+ * Initializes on-chip MMC controllers.
+ * to override, implement board_mmc_init()
+ */
+int cpu_mmc_init(bd_t *bis)
+{
+#ifdef CONFIG_FSL_ESDHC
+ return fsl_esdhc_mmc_init(bis);
+#else
+ return 0;
+#endif
+}
+
+/*
+ * Print out the state of various machine registers.
+ * Currently prints out LAWs, BR0/OR0, and TLBs
+ */
+void mpc85xx_reginfo(void)
+{
+ /* RENAUD print_tlbcam(); */
+ print_laws();
+#if defined(CONFIG_FSL_LBC)
+ print_lbc_regs();
+#endif
+
+}
+
+/* Common ddr init for non-corenet fsl 85xx platforms */
+#ifndef CONFIG_FSL_CORENET
+long int initdram(int board_type)
+{
+ phys_size_t dram_size = 0;
+
+#if defined(CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN)
+ {
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ unsigned int x = 10;
+ unsigned int i;
+
+ /*
+ * Work around to stabilize DDR DLL
+ */
+ out_be32(&gur->ddrdllcr, 0x81000000);
+ asm("sync;isync;msync");
+ udelay(200);
+ while (in_be32(&gur->ddrdllcr) != 0x81000100) {
+ setbits_be32(&gur->devdisr, 0x00010000);
+ for (i = 0; i < x; i++)
+ ;
+ clrbits_be32(&gur->devdisr, 0x00010000);
+ x++;
+ }
+ }
+#endif
+
+#if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD)
+ dram_size = fsl_ddr_sdram(); /* Maybe some day */
+#else
+ dram_size = fixed_sdram();
+#endif
+ dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+ dram_size *= 0x100000;
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+ /*
+ * Initialize and enable DDR ECC.
+ */
+ ddr_enable_ecc(dram_size);
+#endif
+
+ return dram_size;
+}
+#endif
diff --git a/arch/ppc/mach-mpc8xxx/mpc85xx/cpu_init.c b/arch/ppc/mach-mpc8xxx/mpc85xx/cpu_init.c
new file mode 100644
index 0000000..57dee7a
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/mpc85xx/cpu_init.c
@@ -0,0 +1,263 @@
+/*
+ * Copyright 2007-2011 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2003 Motorola Inc.
+ * Modified by Xianghua Xiao, X.Xiao@motorola.com
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/global_data.h>
+#include <ioports.h>
+#include <asm/io.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <mach/immap_85xx.h>
+
+#include "mp.h"
+
+extern void early_init (void);
+
+void cpu_init_f (void)
+{
+ disable_tlb(14);
+ disable_tlb(15);
+
+ init_early_memctl_regs();
+
+#if defined(CONFIG_FSL_DMA)
+ dma_init();
+#endif
+ init_used_tlb_cams();
+
+#ifdef CONFIG_HAS_EARLY_INIT
+ early_init();
+#endif
+}
+
+/* Implement a dummy function for those platforms w/o SERDES */
+static void __fsl_serdes__init(void)
+{
+ return ;
+}
+__attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);
+
+/*
+ * Initialize L2 as cache.
+ *
+ * The newer 8548, etc, parts have twice as much cache, but
+ * use the same bit-encoding as the older 8555, etc, parts.
+ *
+ */
+int cpu_init_r(void)
+{
+#ifdef CONFIG_SYS_LBC_LCRR
+ volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
+#endif
+
+#if defined(CONFIG_L2_CACHE)
+ volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
+ volatile uint cache_ctl;
+ uint svr, ver;
+ uint l2srbar;
+ u32 l2siz_field;
+#endif
+
+ /*puts ("L2: "); */
+
+#if defined(CONFIG_L2_CACHE)
+ svr = get_svr();
+ ver = SVR_SOC_VER(svr);
+
+ asm("msync;isync");
+ cache_ctl = l2cache->l2ctl;
+
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
+ if (cache_ctl & MPC85xx_L2CTL_L2E) {
+ /* Clear L2 SRAM memory-mapped base address */
+ out_be32(&l2cache->l2srbar0, 0x0);
+ out_be32(&l2cache->l2srbar1, 0x0);
+
+ /* set MBECCDIS=0, SBECCDIS=0 */
+ clrbits_be32(&l2cache->l2errdis,
+ (MPC85xx_L2ERRDIS_MBECC |
+ MPC85xx_L2ERRDIS_SBECC));
+
+ /* set L2E=0, L2SRAM=0 */
+ clrbits_be32(&l2cache->l2ctl,
+ (MPC85xx_L2CTL_L2E |
+ MPC85xx_L2CTL_L2SRAM_ENTIRE));
+ }
+#endif
+
+ l2siz_field = (cache_ctl >> 28) & 0x3;
+
+ switch (l2siz_field) {
+ case 0x0:
+ /*printf(" unknown size (0x%08x)\n", cache_ctl); */
+ return -1;
+ break;
+ case 0x1:
+ if (ver == SVR_8540 || ver == SVR_8560 ||
+ ver == SVR_8541 || ver == SVR_8541_E ||
+ ver == SVR_8555 || ver == SVR_8555_E) {
+ /*puts("128 KB "); */
+ /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */
+ cache_ctl = 0xc4000000;
+ } else {
+ /*puts("256 KB "); */
+ cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
+ }
+ break;
+ case 0x2:
+ if (ver == SVR_8540 || ver == SVR_8560 ||
+ ver == SVR_8541 || ver == SVR_8541_E ||
+ ver == SVR_8555 || ver == SVR_8555_E) {
+ /* puts("256 KB "); */
+ /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
+ cache_ctl = 0xc8000000;
+ } else {
+ /* puts ("512 KB "); */
+ /* set L2E=1, L2I=1, & L2SRAM=0 */
+ cache_ctl = 0xc0000000;
+ }
+ break;
+ case 0x3:
+ /*puts("1024 KB ");*/
+ /* set L2E=1, L2I=1, & L2SRAM=0 */
+ cache_ctl = 0xc0000000;
+ break;
+ }
+
+ if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) {
+ /*puts("already enabled");*/
+ l2srbar = l2cache->l2srbar0;
+#if defined(CONFIG_SYS_INIT_L2_ADDR) && defined(CONFIG_SYS_FLASH_BASE)
+ if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE
+ && l2srbar >= CONFIG_SYS_FLASH_BASE) {
+ l2srbar = CONFIG_SYS_INIT_L2_ADDR;
+ l2cache->l2srbar0 = l2srbar;
+ /*printf("moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR); */
+ }
+#endif /* CONFIG_SYS_INIT_L2_ADDR */
+ /*puts("\n"); */
+ } else {
+ asm("msync;isync");
+ l2cache->l2ctl = cache_ctl; /* invalidate & enable */
+ asm("msync;isync");
+ /* puts("enabled\n"); */
+ }
+#elif defined(CONFIG_BACKSIDE_L2_CACHE)
+ u32 l2cfg0 = mfspr(SPRN_L2CFG0);
+
+ /* invalidate the L2 cache */
+ mtspr(SPRN_L2CSR0, (L2CSR0_L2FI|L2CSR0_L2LFC));
+ while (mfspr(SPRN_L2CSR0) & (L2CSR0_L2FI|L2CSR0_L2LFC))
+ ;
+
+#ifdef CONFIG_SYS_CACHE_STASHING
+ /* set stash id to (coreID) * 2 + 32 + L2 (1) */
+ mtspr(SPRN_L2CSR1, (32 + 1));
+#endif
+
+ /* enable the cache */
+ mtspr(SPRN_L2CSR0, CONFIG_SYS_INIT_L2CSR0);
+
+ if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) {
+ while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E))
+ ;
+ /*printf("%d KB enabled\n", (l2cfg0 & 0x3fff) * 64); */
+ }
+#else
+ /*puts("disabled\n"); */
+#endif
+
+
+#ifdef CONFIG_QE
+ uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
+ qe_init(qe_base);
+ qe_reset();
+#endif
+
+ /* needs to be in ram since code uses global static vars */
+ fsl_serdes_init();
+
+#ifdef CONFIG_SYS_SRIO
+ srio_init();
+#endif
+
+#if defined(CONFIG_MP)
+ setup_mp();
+#endif
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC136
+ {
+ void *p;
+ p = (void *)CONFIG_SYS_DCSRBAR + 0x20520;
+ setbits_be32(p, 1 << (31 - 14));
+ }
+#endif
+
+#ifdef CONFIG_SYS_LBC_LCRR
+ /*
+ * Modify the CLKDIV field of LCRR register to improve the writing
+ * speed for NOR flash.
+ */
+ clrsetbits_be32(&lbc->lcrr, LCRR_CLKDIV, CONFIG_SYS_LBC_LCRR);
+ __raw_readl(&lbc->lcrr);
+ isync();
+#endif
+
+ return 0;
+}
+
+extern void setup_ivors(void);
+
+void arch_preboot_os(void)
+{
+ u32 msr;
+
+ /*
+ * We are changing interrupt offsets and are about to boot the OS so
+ * we need to make sure we disable all async interrupts. EE is already
+ * disabled by the time we get called.
+ */
+ msr = mfmsr();
+ msr &= ~(MSR_ME|MSR_CE|MSR_DE);
+ mtmsr(msr);
+
+ setup_ivors();
+}
+
+#if defined(CONFIG_CMD_SATA) && defined(CONFIG_FSL_SATA)
+int sata_initialize(void)
+{
+ if (is_serdes_configured(SATA1) || is_serdes_configured(SATA2))
+ return __sata_initialize();
+
+ return 1;
+}
+#endif
diff --git a/arch/ppc/mach-mpc8xxx/mpc85xx/cpu_init_early.c b/arch/ppc/mach-mpc8xxx/mpc85xx/cpu_init_early.c
new file mode 100644
index 0000000..4bae217
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/mpc85xx/cpu_init_early.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/global_data.h>
+#include <asm/mmu.h>
+#include <asm/fsl_law.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS)
+static void setup_ccsrbar(void)
+{
+ u32 temp;
+ volatile u32 *ccsr_virt = (volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000);
+
+ temp = in_be32(ccsr_virt);
+ out_be32(ccsr_virt, CONFIG_SYS_CCSRBAR_PHYS >> 12);
+ temp = in_be32((volatile u32 *)CONFIG_SYS_CCSRBAR);
+}
+#endif
+
+/* We run cpu_init_early_f in AS = 1 */
+void cpu_init_early_f(void)
+{
+ u32 mas0, mas1, mas2, mas3, mas7;
+ int i;
+
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CFG_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+
+ /*
+ * Clear initial global data
+ * we don't use memset so we can share this code with NAND_SPL
+ */
+ for (i = 0; i < sizeof(gd_t); i++)
+ ((char *)gd)[i] = 0;
+
+ mas0 = MAS0_TLBSEL(0) | MAS0_ESEL(0);
+ mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_TSIZE(BOOKE_PAGESZ_4K);
+ mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G);
+ mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS, 0, MAS3_SW|MAS3_SR);
+ mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_CCSRBAR_PHYS);
+
+ write_tlb(mas0, mas1, mas2, mas3, mas7);
+
+ /* set up CCSR if we want it moved */
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS)
+ mas0 = MAS0_TLBSEL(0) | MAS0_ESEL(1);
+ /* mas1 is the same as above */
+ mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G);
+ mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, MAS3_SW|MAS3_SR);
+ mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_CCSRBAR_DEFAULT);
+
+ write_tlb(mas0, mas1, mas2, mas3, mas7);
+
+ setup_ccsrbar();
+#endif
+
+ init_laws();
+ invalidate_tlb(0);
+ init_tlbs();
+}
diff --git a/arch/ppc/mach-mpc8xxx/mpc85xx/fdt.c b/arch/ppc/mach-mpc8xxx/mpc85xx/fdt.c
new file mode 100644
index 0000000..6efa104
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/mpc85xx/fdt.c
@@ -0,0 +1,490 @@
+/*
+ * Copyright 2007-2011 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/processor.h>
+#include <linux/ctype.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/fsl_portals.h>
+#ifdef CONFIG_FSL_ESDHC
+#include <fsl_esdhc.h>
+#endif
+
+extern void ft_qe_setup(void *blob);
+extern void ft_fixup_num_cores(void *blob);
+extern void ft_srio_setup(void *blob);
+
+#ifdef CONFIG_MP
+#include "mp.h"
+
+void ft_fixup_cpu(void *blob, u64 memory_limit)
+{
+ int off;
+ ulong spin_tbl_addr = get_spin_phys_addr();
+ u32 bootpg = determine_mp_bootpg();
+ u32 id = get_my_id();
+ const char *enable_method;
+
+ off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+ while (off > 0) {
+ u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+
+ if (reg) {
+ u64 val = *reg * SIZE_BOOT_ENTRY + spin_tbl_addr;
+ val = cpu_to_fdt32(val);
+ if (*reg == id) {
+ fdt_setprop_string(blob, off, "status",
+ "okay");
+ } else {
+ fdt_setprop_string(blob, off, "status",
+ "disabled");
+ }
+
+ if (hold_cores_in_reset(0)) {
+#ifdef CONFIG_FSL_CORENET
+ /* Cores held in reset, use BRR to release */
+ enable_method = "fsl,brr-holdoff";
+#else
+ /* Cores held in reset, use EEBPCR to release */
+ enable_method = "fsl,eebpcr-holdoff";
+#endif
+ } else {
+ /* Cores out of reset and in a spin-loop */
+ enable_method = "spin-table";
+
+ fdt_setprop(blob, off, "cpu-release-addr",
+ &val, sizeof(val));
+ }
+
+ fdt_setprop_string(blob, off, "enable-method",
+ enable_method);
+ } else {
+ printf ("cpu NULL\n");
+ }
+ off = fdt_node_offset_by_prop_value(blob, off,
+ "device_type", "cpu", 4);
+ }
+
+ /* Reserve the boot page so OSes dont use it */
+ if ((u64)bootpg < memory_limit) {
+ off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
+ if (off < 0)
+ printf("%s: %s\n", __FUNCTION__, fdt_strerror(off));
+ }
+}
+#endif
+
+#ifdef CONFIG_SYS_FSL_CPC
+static inline void ft_fixup_l3cache(void *blob, int off)
+{
+ u32 line_size, num_ways, size, num_sets;
+ cpc_corenet_t *cpc = (void *)CONFIG_SYS_FSL_CPC_ADDR;
+ u32 cfg0 = in_be32(&cpc->cpccfg0);
+
+ size = CPC_CFG0_SZ_K(cfg0) * 1024 * CONFIG_SYS_NUM_CPC;
+ num_ways = CPC_CFG0_NUM_WAYS(cfg0);
+ line_size = CPC_CFG0_LINE_SZ(cfg0);
+ num_sets = size / (line_size * num_ways);
+
+ fdt_setprop(blob, off, "cache-unified", NULL, 0);
+ fdt_setprop_cell(blob, off, "cache-block-size", line_size);
+ fdt_setprop_cell(blob, off, "cache-size", size);
+ fdt_setprop_cell(blob, off, "cache-sets", num_sets);
+ fdt_setprop_cell(blob, off, "cache-level", 3);
+#ifdef CONFIG_SYS_CACHE_STASHING
+ fdt_setprop_cell(blob, off, "cache-stash-id", 1);
+#endif
+}
+#else
+#define ft_fixup_l3cache(x, y)
+#endif
+
+#if defined(CONFIG_L2_CACHE)
+/* return size in kilobytes */
+static inline u32 l2cache_size(void)
+{
+ volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
+ volatile u32 l2siz_field = (l2cache->l2ctl >> 28) & 0x3;
+ u32 ver = SVR_SOC_VER(get_svr());
+
+ switch (l2siz_field) {
+ case 0x0:
+ break;
+ case 0x1:
+ if (ver == SVR_8540 || ver == SVR_8560 ||
+ ver == SVR_8541 || ver == SVR_8541_E ||
+ ver == SVR_8555 || ver == SVR_8555_E)
+ return 128;
+ else
+ return 256;
+ break;
+ case 0x2:
+ if (ver == SVR_8540 || ver == SVR_8560 ||
+ ver == SVR_8541 || ver == SVR_8541_E ||
+ ver == SVR_8555 || ver == SVR_8555_E)
+ return 256;
+ else
+ return 512;
+ break;
+ case 0x3:
+ return 1024;
+ break;
+ }
+
+ return 0;
+}
+
+static inline void ft_fixup_l2cache(void *blob)
+{
+ int len, off;
+ u32 *ph;
+ struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr()));
+ char compat_buf[38];
+
+ const u32 line_size = 32;
+ const u32 num_ways = 8;
+ const u32 size = l2cache_size() * 1024;
+ const u32 num_sets = size / (line_size * num_ways);
+
+ off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+ if (off < 0) {
+ debug("no cpu node fount\n");
+ return;
+ }
+
+ ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
+
+ if (ph == NULL) {
+ debug("no next-level-cache property\n");
+ return ;
+ }
+
+ off = fdt_node_offset_by_phandle(blob, *ph);
+ if (off < 0) {
+ printf("%s: %s\n", __func__, fdt_strerror(off));
+ return ;
+ }
+
+ if (cpu) {
+ if (isdigit(cpu->name[0]))
+ len = sprintf(compat_buf,
+ "fsl,mpc%s-l2-cache-controller", cpu->name);
+ else
+ len = sprintf(compat_buf,
+ "fsl,%c%s-l2-cache-controller",
+ tolower(cpu->name[0]), cpu->name + 1);
+
+ sprintf(&compat_buf[len + 1], "cache");
+ }
+ fdt_setprop(blob, off, "cache-unified", NULL, 0);
+ fdt_setprop_cell(blob, off, "cache-block-size", line_size);
+ fdt_setprop_cell(blob, off, "cache-size", size);
+ fdt_setprop_cell(blob, off, "cache-sets", num_sets);
+ fdt_setprop_cell(blob, off, "cache-level", 2);
+ fdt_setprop(blob, off, "compatible", compat_buf, sizeof(compat_buf));
+
+ /* we dont bother w/L3 since no platform of this type has one */
+}
+#elif defined(CONFIG_BACKSIDE_L2_CACHE)
+static inline void ft_fixup_l2cache(void *blob)
+{
+ int off, l2_off, l3_off = -1;
+ u32 *ph;
+ u32 l2cfg0 = mfspr(SPRN_L2CFG0);
+ u32 size, line_size, num_ways, num_sets;
+
+ size = (l2cfg0 & 0x3fff) * 64 * 1024;
+ num_ways = ((l2cfg0 >> 14) & 0x1f) + 1;
+ line_size = (((l2cfg0 >> 23) & 0x3) + 1) * 32;
+ num_sets = size / (line_size * num_ways);
+
+ off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+
+ while (off > 0) {
+ ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
+
+ if (ph == NULL) {
+ debug("no next-level-cache property\n");
+ goto next;
+ }
+
+ l2_off = fdt_node_offset_by_phandle(blob, *ph);
+ if (l2_off < 0) {
+ printf("%s: %s\n", __func__, fdt_strerror(off));
+ goto next;
+ }
+
+#ifdef CONFIG_SYS_CACHE_STASHING
+ {
+ u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+ if (reg)
+ fdt_setprop_cell(blob, l2_off, "cache-stash-id",
+ (*reg * 2) + 32 + 1);
+ }
+#endif
+
+ fdt_setprop(blob, l2_off, "cache-unified", NULL, 0);
+ fdt_setprop_cell(blob, l2_off, "cache-block-size", line_size);
+ fdt_setprop_cell(blob, l2_off, "cache-size", size);
+ fdt_setprop_cell(blob, l2_off, "cache-sets", num_sets);
+ fdt_setprop_cell(blob, l2_off, "cache-level", 2);
+ fdt_setprop(blob, l2_off, "compatible", "cache", 6);
+
+ if (l3_off < 0) {
+ ph = (u32 *)fdt_getprop(blob, l2_off, "next-level-cache", 0);
+
+ if (ph == NULL) {
+ debug("no next-level-cache property\n");
+ goto next;
+ }
+ l3_off = *ph;
+ }
+next:
+ off = fdt_node_offset_by_prop_value(blob, off,
+ "device_type", "cpu", 4);
+ }
+ if (l3_off > 0) {
+ l3_off = fdt_node_offset_by_phandle(blob, l3_off);
+ if (l3_off < 0) {
+ printf("%s: %s\n", __func__, fdt_strerror(off));
+ return ;
+ }
+ ft_fixup_l3cache(blob, l3_off);
+ }
+}
+#else
+#define ft_fixup_l2cache(x)
+#endif
+
+static inline void ft_fixup_cache(void *blob)
+{
+ int off;
+
+ off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+
+ while (off > 0) {
+ u32 l1cfg0 = mfspr(SPRN_L1CFG0);
+ u32 l1cfg1 = mfspr(SPRN_L1CFG1);
+ u32 isize, iline_size, inum_sets, inum_ways;
+ u32 dsize, dline_size, dnum_sets, dnum_ways;
+
+ /* d-side config */
+ dsize = (l1cfg0 & 0x7ff) * 1024;
+ dnum_ways = ((l1cfg0 >> 11) & 0xff) + 1;
+ dline_size = (((l1cfg0 >> 23) & 0x3) + 1) * 32;
+ dnum_sets = dsize / (dline_size * dnum_ways);
+
+ fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size);
+ fdt_setprop_cell(blob, off, "d-cache-size", dsize);
+ fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets);
+
+#ifdef CONFIG_SYS_CACHE_STASHING
+ {
+ u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+ if (reg)
+ fdt_setprop_cell(blob, off, "cache-stash-id",
+ (*reg * 2) + 32 + 0);
+ }
+#endif
+
+ /* i-side config */
+ isize = (l1cfg1 & 0x7ff) * 1024;
+ inum_ways = ((l1cfg1 >> 11) & 0xff) + 1;
+ iline_size = (((l1cfg1 >> 23) & 0x3) + 1) * 32;
+ inum_sets = isize / (iline_size * inum_ways);
+
+ fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size);
+ fdt_setprop_cell(blob, off, "i-cache-size", isize);
+ fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets);
+
+ off = fdt_node_offset_by_prop_value(blob, off,
+ "device_type", "cpu", 4);
+ }
+
+ ft_fixup_l2cache(blob);
+}
+
+
+void fdt_add_enet_stashing(void *fdt)
+{
+ do_fixup_by_compat(fdt, "gianfar", "bd-stash", NULL, 0, 1);
+
+ do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-len", 96, 1);
+
+ do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-idx", 0, 1);
+}
+
+#if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME)
+static void ft_fixup_clks(void *blob, const char *compat, u32 offset,
+ unsigned long freq)
+{
+ phys_addr_t phys = offset + CONFIG_SYS_CCSRBAR_PHYS;
+ int off = fdt_node_offset_by_compat_reg(blob, compat, phys);
+
+ if (off >= 0) {
+ off = fdt_setprop_cell(blob, off, "clock-frequency", freq);
+ if (off > 0)
+ printf("WARNING enable to set clock-frequency "
+ "for %s: %s\n", compat, fdt_strerror(off));
+ }
+}
+
+static void ft_fixup_dpaa_clks(void *blob)
+{
+ sys_info_t sysinfo;
+
+ get_sys_info(&sysinfo);
+ ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET,
+ sysinfo.freqFMan[0]);
+
+#if (CONFIG_SYS_NUM_FMAN == 2)
+ ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET,
+ sysinfo.freqFMan[1]);
+#endif
+
+#ifdef CONFIG_SYS_DPAA_PME
+ do_fixup_by_compat_u32(blob, "fsl,pme",
+ "clock-frequency", sysinfo.freqPME, 1);
+#endif
+}
+#else
+#define ft_fixup_dpaa_clks(x)
+#endif
+
+#ifdef CONFIG_QE
+static void ft_fixup_qe_snum(void *blob)
+{
+ unsigned int svr;
+
+ svr = mfspr(SPRN_SVR);
+ if (SVR_SOC_VER(svr) == SVR_8569_E) {
+ if(IS_SVR_REV(svr, 1, 0))
+ do_fixup_by_compat_u32(blob, "fsl,qe",
+ "fsl,qe-num-snums", 46, 1);
+ else
+ do_fixup_by_compat_u32(blob, "fsl,qe",
+ "fsl,qe-num-snums", 76, 1);
+ }
+}
+#endif
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+ int off;
+ int val;
+ u32 *p;
+ int len;
+ sys_info_t sysinfo;
+
+ /* delete crypto node if not on an E-processor */
+ if (!IS_E_PROCESSOR(get_svr()))
+ fdt_fixup_crypto_node(blob, 0);
+
+ fdt_fixup_ethernet(blob);
+
+ fdt_add_enet_stashing(blob);
+
+ get_sys_info(&sysinfo);
+
+ /* Use global data */
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "timebase-frequency", get_timebase_clock(), 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+
+ off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+
+ while (off > 0) {
+ u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+ val = cpu_to_fdt32(sysinfo.freqProcessor[*reg]);
+ fdt_setprop(blob, off, "clock-frequency", &val, 4);
+ off = fdt_node_offset_by_prop_value(blob, off, "device_type", "cpu", 4);
+ }
+ do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+
+ do_fixup_by_compat_u32(blob, "fsl,pq3-localbus",
+ "bus-frequency", sysinfo.freqLocalBus, 1);
+ do_fixup_by_compat_u32(blob, "fsl,elbc",
+ "bus-frequency", sysinfo.freqLocalBus, 1);
+#ifdef CONFIG_QE
+ ft_qe_setup(blob);
+ ft_fixup_qe_snum(blob);
+#endif
+
+#ifdef CONFIG_DRIVER_SERIAL_NS16550
+ do_fixup_by_compat_u32(blob, "ns16550",
+ "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
+#endif
+
+#ifdef CONFIG_CPM2
+ do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart",
+ "current-speed", bd->bi_baudrate, 1);
+
+ do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
+ "clock-frequency", bd->bi_brgfreq, 1);
+#endif
+
+#ifdef CONFIG_FSL_CORENET
+ do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-1.0",
+ "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
+#endif
+
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+#ifdef CONFIG_MP
+ ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize);
+ ft_fixup_num_cores(blob);
+#endif
+
+ ft_fixup_cache(blob);
+
+#if defined(CONFIG_FSL_ESDHC)
+ fdt_fixup_esdhc(blob, bd);
+#endif
+
+ ft_fixup_dpaa_clks(blob);
+
+#if defined(CONFIG_SYS_BMAN_MEM_PHYS)
+ fdt_portal(blob, "fsl,bman-portal", "bman-portals",
+ (u64)CONFIG_SYS_BMAN_MEM_PHYS,
+ CONFIG_SYS_BMAN_MEM_SIZE);
+#endif
+
+#if defined(CONFIG_SYS_QMAN_MEM_PHYS)
+ fdt_portal(blob, "fsl,qman-portal", "qman-portals",
+ (u64)CONFIG_SYS_QMAN_MEM_PHYS,
+ CONFIG_SYS_QMAN_MEM_SIZE);
+
+ fdt_fixup_qportals(blob);
+#endif
+
+#ifdef CONFIG_SYS_SRIO
+ ft_srio_setup(blob);
+#endif
+}
diff --git a/arch/ppc/mach-mpc8xxx/mpc85xx/fixed_ivor.S b/arch/ppc/mach-mpc8xxx/mpc85xx/fixed_ivor.S
new file mode 100644
index 0000000..320cae3
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/mpc85xx/fixed_ivor.S
@@ -0,0 +1,79 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * Kumar Gala <kumar.gala@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* This file is intended to be included by other asm code since
+ * we will want to execute this on both the primary core when
+ * it does a bootm and the secondary core's that get released
+ * out of the spin table */
+
+#define SET_IVOR(vector_number, vector_offset) \
+ li r3,vector_offset@l; \
+ mtspr SPRN_IVOR##vector_number,r3;
+
+#define SET_GIVOR(vector_number, vector_offset) \
+ li r3,vector_offset@l; \
+ mtspr SPRN_GIVOR##vector_number,r3;
+
+ SET_IVOR(0, 0x020) /* Critical Input */
+ SET_IVOR(1, 0x000) /* Machine Check */
+ SET_IVOR(2, 0x060) /* Data Storage */
+ SET_IVOR(3, 0x080) /* Instruction Storage */
+ SET_IVOR(4, 0x0a0) /* External Input */
+ SET_IVOR(5, 0x0c0) /* Alignment */
+ SET_IVOR(6, 0x0e0) /* Program */
+ SET_IVOR(7, 0x100) /* FP Unavailable */
+ SET_IVOR(8, 0x120) /* System Call */
+ SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */
+ SET_IVOR(10, 0x160) /* Decrementer */
+ SET_IVOR(11, 0x180) /* Fixed Interval Timer */
+ SET_IVOR(12, 0x1a0) /* Watchdog Timer */
+ SET_IVOR(13, 0x1c0) /* Data TLB Error */
+ SET_IVOR(14, 0x1e0) /* Instruction TLB Error */
+ SET_IVOR(15, 0x040) /* Debug */
+
+/* e500v1 & e500v2 only */
+#ifndef CONFIG_E500MC
+ SET_IVOR(32, 0x200) /* SPE Unavailable */
+ SET_IVOR(33, 0x220) /* Embedded FP Data */
+ SET_IVOR(34, 0x240) /* Embedded FP Round */
+#endif
+
+ SET_IVOR(35, 0x260) /* Performance monitor */
+
+/* e500mc only */
+#ifdef CONFIG_E500MC
+ SET_IVOR(36, 0x280) /* Processor doorbell */
+ SET_IVOR(37, 0x2a0) /* Processor doorbell critical */
+ SET_IVOR(38, 0x2c0) /* Guest Processor doorbell */
+ SET_IVOR(39, 0x2e0) /* Guest Processor critical & machine check */
+ SET_IVOR(40, 0x300) /* Hypervisor system call */
+ SET_IVOR(41, 0x320) /* Hypervisor Priviledge */
+
+ SET_GIVOR(2, 0x060) /* Guest Data Storage */
+ SET_GIVOR(3, 0x080) /* Guest Instruction Storage */
+ SET_GIVOR(4, 0x0a0) /* Guest External Input */
+ SET_GIVOR(8, 0x120) /* Guest System Call */
+ SET_GIVOR(13, 0x1c0) /* Guest Data TLB Error */
+ SET_GIVOR(14, 0x1e0) /* Guest Instruction TLB Error */
+#endif
diff --git a/arch/ppc/mach-mpc8xxx/mpc85xx/interrupts.c b/arch/ppc/mach-mpc8xxx/mpc85xx/interrupts.c
new file mode 100644
index 0000000..c6edd7d
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/mpc85xx/interrupts.c
@@ -0,0 +1,113 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 (440 port)
+ * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
+ *
+ * (C) Copyright 2003 Motorola Inc. (MPC85xx port)
+ * Xianghua Xiao (X.Xiao@motorola.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+int interrupt_init_cpu(unsigned int *decrementer_count)
+{
+ ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC8xxx_PIC_ADDR;
+ unsigned int val;
+
+ out_be32(&pic->gcr, MPC85xx_PICGCR_RST);
+ while (in_be32(&pic->gcr) & MPC85xx_PICGCR_RST)
+ ;
+ out_be32(&pic->gcr, MPC85xx_PICGCR_M);
+ in_be32(&pic->gcr);
+
+ *decrementer_count = get_timebase_clock() / CONFIG_SYS_HZ;
+
+ /* PIE is same as DIE, dec interrupt enable */
+ val = mfspr(SPRN_TCR);
+ val |= TCR_PIE;
+ mtspr(SPRN_TCR,val);
+
+#ifdef CONFIG_INTERRUPTS
+ pic->iivpr1 = 0x810001; /* 50220 enable ecm interrupts */
+ debug("iivpr1@%x = %x\n", (uint)&pic->iivpr1, pic->iivpr1);
+
+ pic->iivpr2 = 0x810002; /* 50240 enable ddr interrupts */
+ debug("iivpr2@%x = %x\n", (uint)&pic->iivpr2, pic->iivpr2);
+
+ pic->iivpr3 = 0x810003; /* 50260 enable lbc interrupts */
+ debug("iivpr3@%x = %x\n", (uint)&pic->iivpr3, pic->iivpr3);
+
+#ifdef CONFIG_PCI1
+ pic->iivpr8 = 0x810008; /* enable pci1 interrupts */
+ debug("iivpr8@%x = %x\n", (uint)&pic->iivpr8, pic->iivpr8);
+#endif
+#if defined(CONFIG_PCI2) || defined(CONFIG_PCIE2)
+ pic->iivpr9 = 0x810009; /* enable pci1 interrupts */
+ debug("iivpr9@%x = %x\n", (uint)&pic->iivpr9, pic->iivpr9);
+#endif
+#ifdef CONFIG_PCIE1
+ pic->iivpr10 = 0x81000a; /* enable pcie1 interrupts */
+ debug("iivpr10@%x = %x\n", (uint)&pic->iivpr10, pic->iivpr10);
+#endif
+#ifdef CONFIG_PCIE3
+ pic->iivpr11 = 0x81000b; /* enable pcie3 interrupts */
+ debug("iivpr11@%x = %x\n", (uint)&pic->iivpr11, pic->iivpr11);
+#endif
+
+ pic->ctpr=0; /* 40080 clear current task priority register */
+#endif
+
+ return (0);
+}
+
+/* Install and free a interrupt handler. Not implemented yet. */
+
+void
+irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
+{
+ return;
+}
+
+void
+irq_free_handler(int vec)
+{
+ return;
+}
+
+void timer_interrupt_cpu(struct pt_regs *regs)
+{
+ /* PIS is same as DIS, dec interrupt status */
+ mtspr(SPRN_TSR, TSR_PIS);
+}
+
+#if defined(CONFIG_CMD_IRQ)
+/* irqinfo - print information about PCI devices,not implemented. */
+int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ return 0;
+}
+#endif
diff --git a/arch/ppc/mach-mpc8xxx/mpc85xx/mp.c b/arch/ppc/mach-mpc8xxx/mpc85xx/mp.c
new file mode 100644
index 0000000..8a8e571
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/mpc85xx/mp.c
@@ -0,0 +1,408 @@
+/*
+ * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/processor.h>
+#include <ioports.h>
+#include <lmb.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/fsl_law.h>
+#include <mach/early_udelay.h>
+#include "mp.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+u32 get_my_id()
+{
+ return mfspr(SPRN_PIR);
+}
+
+/*
+ * Determine if U-Boot should keep secondary cores in reset, or let them out
+ * of reset and hold them in a spinloop
+ */
+int hold_cores_in_reset(int verbose)
+{
+ /*const char *s = getenv("mp_holdoff"); */
+ const char *s = NULL;
+
+ /* Default to no, overriden by 'y', 'yes', 'Y', 'Yes', or '1' */
+ if (s && (*s == 'y' || *s == 'Y' || *s == '1')) {
+ if (verbose) {
+ puts("Secondary cores are being held in reset.\n");
+ puts("See 'mp_holdoff' environment variable\n");
+ }
+
+ return 1;
+ }
+
+ return 0;
+}
+
+int cpu_reset(int nr)
+{
+ volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
+ out_be32(&pic->pir, 1 << nr);
+ /* the dummy read works around an errata on early 85xx MP PICs */
+ (void)in_be32(&pic->pir);
+ out_be32(&pic->pir, 0x0);
+
+ return 0;
+}
+
+int cpu_status(int nr)
+{
+ u32 *table, id = get_my_id();
+
+ if (hold_cores_in_reset(1))
+ return 0;
+
+ if (nr == id) {
+ table = (u32 *)get_spin_virt_addr();
+ printf("table base @ 0x%p\n", table);
+ } else {
+ table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
+ printf("Running on cpu %d\n", id);
+ printf("\n");
+ printf("table @ 0x%p\n", table);
+ printf(" addr - 0x%08x\n", table[BOOT_ENTRY_ADDR_LOWER]);
+ printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]);
+ printf(" r3 - 0x%08x\n", table[BOOT_ENTRY_R3_LOWER]);
+ printf(" r6 - 0x%08x\n", table[BOOT_ENTRY_R6_LOWER]);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_FSL_CORENET
+int cpu_disable(int nr)
+{
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+ setbits_be32(&gur->coredisrl, 1 << nr);
+
+ return 0;
+}
+
+int is_core_disabled(int nr) {
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 coredisrl = in_be32(&gur->coredisrl);
+
+ return (coredisrl & (1 << nr));
+}
+#else
+int cpu_disable(int nr)
+{
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+ switch (nr) {
+ case 0:
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_CPU0);
+ break;
+ case 1:
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_CPU1);
+ break;
+ default:
+ printf("Invalid cpu number for disable %d\n", nr);
+ return 1;
+ }
+
+ return 0;
+}
+
+int is_core_disabled(int nr) {
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 devdisr = in_be32(&gur->devdisr);
+
+ switch (nr) {
+ case 0:
+ return (devdisr & MPC85xx_DEVDISR_CPU0);
+ case 1:
+ return (devdisr & MPC85xx_DEVDISR_CPU1);
+ default:
+ printf("Invalid cpu number for disable %d\n", nr);
+ }
+
+ return 0;
+}
+#endif
+
+static u8 boot_entry_map[4] = {
+ 0,
+ BOOT_ENTRY_PIR,
+ BOOT_ENTRY_R3_LOWER,
+ BOOT_ENTRY_R6_LOWER,
+};
+
+int cpu_release(int nr, int argc, char * const argv[])
+{
+ u32 i, val, *table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
+ u64 boot_addr;
+
+ if (hold_cores_in_reset(1))
+ return 0;
+
+ if (nr == get_my_id()) {
+ printf("Invalid to release the boot core.\n\n");
+ return 1;
+ }
+
+ if (argc != 4) {
+ printf("Invalid number of arguments to release.\n\n");
+ return 1;
+ }
+
+ boot_addr = simple_strtoull(argv[0], NULL, 16);
+
+ /* handle pir, r3, r6 */
+ for (i = 1; i < 4; i++) {
+ if (argv[i][0] != '-') {
+ u8 entry = boot_entry_map[i];
+ val = simple_strtoul(argv[i], NULL, 16);
+ table[entry] = val;
+ }
+ }
+
+ table[BOOT_ENTRY_ADDR_UPPER] = (u32)(boot_addr >> 32);
+
+ /* ensure all table updates complete before final address write */
+ eieio();
+
+ table[BOOT_ENTRY_ADDR_LOWER] = (u32)(boot_addr & 0xffffffff);
+
+ return 0;
+}
+
+u32 determine_mp_bootpg(void)
+{
+ /* if we have 4G or more of memory, put the boot page at 4Gb-4k */
+ /*if ((u64)gd->ram_size > 0xfffff000) */
+ if ((u64)get_effective_memsize() > 0xfffff000)
+ return (0xfffff000);
+
+ return (get_effective_memsize() - 4096);
+ /*return (gd->ram_size - 4096);*/
+}
+
+ulong get_spin_phys_addr(void)
+{
+ extern ulong __secondary_start_page;
+ extern ulong __spin_table;
+
+ return (determine_mp_bootpg() +
+ (ulong)&__spin_table - (ulong)&__secondary_start_page);
+}
+
+ulong get_spin_virt_addr(void)
+{
+ extern ulong __secondary_start_page;
+ extern ulong __spin_table;
+
+ return (CONFIG_BPTR_VIRT_ADDR +
+ (ulong)&__spin_table - (ulong)&__secondary_start_page);
+}
+
+#ifdef CONFIG_FSL_CORENET
+static void plat_mp_up(unsigned long bootpg)
+{
+ u32 up, cpu_up_mask, whoami;
+ u32 *table = (u32 *)get_spin_virt_addr();
+ volatile ccsr_gur_t *gur;
+ volatile ccsr_local_t *ccm;
+ volatile ccsr_rcpm_t *rcpm;
+ volatile ccsr_pic_t *pic;
+ int timeout = 10;
+ u32 nr_cpus;
+ struct law_entry e;
+
+ gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR);
+ rcpm = (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR);
+ pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
+
+ nr_cpus = ((in_be32(&pic->frr) >> 8) & 0xff) + 1;
+
+ whoami = in_be32(&pic->whoami);
+ cpu_up_mask = 1 << whoami;
+ out_be32(&ccm->bstrl, bootpg);
+
+ e = find_law(bootpg);
+ out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | LAW_SIZE_4K);
+
+ /* readback to sync write */
+ in_be32(&ccm->bstrar);
+
+ /* disable time base at the platform */
+ out_be32(&rcpm->ctbenrl, cpu_up_mask);
+
+ /* release the hounds */
+ up = ((1 << nr_cpus) - 1);
+ out_be32(&gur->brrl, up);
+
+ /* wait for everyone */
+ while (timeout) {
+ int i;
+ for (i = 0; i < nr_cpus; i++) {
+ if (table[i * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER])
+ cpu_up_mask |= (1 << i);
+ };
+
+ if ((cpu_up_mask & up) == up)
+ break;
+
+ early_udelay(100);
+ timeout--;
+ }
+
+ if (timeout == 0)
+ printf("CPU up timeout. CPU up mask is %x should be %x\n",
+ cpu_up_mask, up);
+
+ /* enable time base at the platform */
+ out_be32(&rcpm->ctbenrl, 0);
+ mtspr(SPRN_TBWU, 0);
+ mtspr(SPRN_TBWL, 0);
+ out_be32(&rcpm->ctbenrl, (1 << nr_cpus) - 1);
+
+#ifdef CONFIG_MPC8xxx_DISABLE_BPTR
+ /*
+ * Disabling Boot Page Translation allows the memory region 0xfffff000
+ * to 0xffffffff to be used normally. Leaving Boot Page Translation
+ * enabled remaps 0xfffff000 to SDRAM which makes that memory region
+ * unusable for normal operation but it does allow OSes to easily
+ * reset a processor core to put it back into U-Boot's spinloop.
+ */
+ clrbits_be32(&ecm->bptr, 0x80000000);
+#endif
+}
+#else
+static void plat_mp_up(unsigned long bootpg)
+{
+ u32 up, cpu_up_mask, whoami;
+ u32 *table = (u32 *)get_spin_virt_addr();
+ volatile u32 bpcr;
+ volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
+ u32 devdisr;
+ int timeout = 10;
+
+ whoami = in_be32(&pic->whoami);
+ out_be32(&ecm->bptr, 0x80000000 | (bootpg >> 12));
+
+ /* disable time base at the platform */
+ devdisr = in_be32(&gur->devdisr);
+ if (whoami)
+ devdisr |= MPC85xx_DEVDISR_TB0;
+ else
+ devdisr |= MPC85xx_DEVDISR_TB1;
+ out_be32(&gur->devdisr, devdisr);
+
+ /* release the hounds */
+ up = ((1 << cpu_numcores()) - 1);
+ bpcr = in_be32(&ecm->eebpcr);
+ bpcr |= (up << 24);
+ out_be32(&ecm->eebpcr, bpcr);
+ asm("sync; isync; msync");
+
+ cpu_up_mask = 1 << whoami;
+ /* wait for everyone */
+ while (timeout) {
+ int i;
+ for (i = 0; i < cpu_numcores(); i++) {
+ if (table[i * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER])
+ cpu_up_mask |= (1 << i);
+ };
+
+ if ((cpu_up_mask & up) == up)
+ break;
+
+ /*udelay(100);*/
+ early_udelay(100);
+ timeout--;
+ }
+
+ /*if (timeout == 0)
+ printf("CPU up timeout. CPU up mask is %x should be %x\n",
+ cpu_up_mask, up); */
+
+ /* enable time base at the platform */
+ if (whoami)
+ devdisr |= MPC85xx_DEVDISR_TB1;
+ else
+ devdisr |= MPC85xx_DEVDISR_TB0;
+ out_be32(&gur->devdisr, devdisr);
+ mtspr(SPRN_TBWU, 0);
+ mtspr(SPRN_TBWL, 0);
+
+ devdisr &= ~(MPC85xx_DEVDISR_TB0 | MPC85xx_DEVDISR_TB1);
+ out_be32(&gur->devdisr, devdisr);
+
+#ifdef CONFIG_MPC8xxx_DISABLE_BPTR
+ /*
+ * Disabling Boot Page Translation allows the memory region 0xfffff000
+ * to 0xffffffff to be used normally. Leaving Boot Page Translation
+ * enabled remaps 0xfffff000 to SDRAM which makes that memory region
+ * unusable for normal operation but it does allow OSes to easily
+ * reset a processor core to put it back into U-Boot's spinloop.
+ */
+ clrbits_be32(&ecm->bptr, 0x80000000);
+#endif
+}
+#endif
+
+void setup_mp(void)
+{
+ extern ulong __secondary_start_page;
+ extern ulong __bootpg_addr;
+ ulong fixup = (ulong)&__secondary_start_page;
+ u32 bootpg = determine_mp_bootpg();
+
+ /* Some OSes expect secondary cores to be held in reset */
+ if (hold_cores_in_reset(0))
+ return;
+
+ /* Store the bootpg's SDRAM address for use by secondary CPU cores */
+ __bootpg_addr = bootpg;
+
+ /* look for the tlb covering the reset page, there better be one */
+ int i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1);
+
+ /* we found a match */
+ if (i != -1) {
+ /* map reset page to bootpg so we can copy code there */
+ disable_tlb(i);
+
+ set_tlb(1, CONFIG_BPTR_VIRT_ADDR, bootpg, /* tlb, epn, rpn */
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
+ 0, i, BOOKE_PAGESZ_4K, 1); /* ts, esel, tsize, iprot */
+
+ memcpy((void *)CONFIG_BPTR_VIRT_ADDR, (void *)fixup, 4096);
+
+ plat_mp_up(bootpg);
+ } else {
+ puts("WARNING: No reset page TLB. "
+ "Skipping secondary core setup\n");
+ }
+}
diff --git a/arch/ppc/mach-mpc8xxx/mpc85xx/mp.h b/arch/ppc/mach-mpc8xxx/mpc85xx/mp.h
new file mode 100644
index 0000000..87bac37
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/mpc85xx/mp.h
@@ -0,0 +1,22 @@
+#ifndef __MPC85XX_MP_H_
+#define __MPC85XX_MP_H_
+
+#include <asm/mp.h>
+
+ulong get_spin_phys_addr(void);
+ulong get_spin_virt_addr(void);
+u32 get_my_id(void);
+int hold_cores_in_reset(int verbose);
+
+#define BOOT_ENTRY_ADDR_UPPER 0
+#define BOOT_ENTRY_ADDR_LOWER 1
+#define BOOT_ENTRY_R3_UPPER 2
+#define BOOT_ENTRY_R3_LOWER 3
+#define BOOT_ENTRY_RESV 4
+#define BOOT_ENTRY_PIR 5
+#define BOOT_ENTRY_R6_UPPER 6
+#define BOOT_ENTRY_R6_LOWER 7
+#define NUM_BOOT_ENTRY 8
+#define SIZE_BOOT_ENTRY (NUM_BOOT_ENTRY * sizeof(u32))
+
+#endif
diff --git a/arch/ppc/mach-mpc8xxx/mpc85xx/mpc8544_serdes.c b/arch/ppc/mach-mpc8xxx/mpc85xx/mpc8544_serdes.c
new file mode 100644
index 0000000..cd8aec4
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/mpc85xx/mpc8544_serdes.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <mach/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+#define SRDS1_MAX_LANES 8
+#define SRDS2_MAX_LANES 4
+
+static u32 serdes1_prtcl_map, serdes2_prtcl_map;
+
+static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = {
+ [0x2] = {PCIE1, PCIE1, PCIE1, PCIE1, NONE, NONE, NONE, NONE},
+ [0x3] = {PCIE1, PCIE1, PCIE1, PCIE1, NONE, NONE, NONE, NONE},
+ [0x4] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2},
+ [0x5] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2},
+ [0x6] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2},
+ [0x7] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2},
+};
+
+static u8 serdes2_cfg_tbl[][SRDS2_MAX_LANES] = {
+ [0x1] = {NONE, NONE, SGMII_TSEC1, SGMII_TSEC3},
+ [0x3] = {NONE, NONE, SGMII_TSEC1, SGMII_TSEC3},
+ [0x5] = {NONE, NONE, SGMII_TSEC1, SGMII_TSEC3},
+ [0x6] = {PCIE3, NONE, NONE, NONE},
+ [0x7] = {PCIE3, NONE, SGMII_TSEC1, SGMII_TSEC3},
+};
+
+int is_serdes_configured(enum srds_prtcl device)
+{
+ int ret = (1 << device) & serdes1_prtcl_map;
+
+ if (ret)
+ return ret;
+
+ return (1 << device) & serdes2_prtcl_map;
+}
+
+void fsl_serdes_init(void)
+{
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ u32 pordevsr = in_be32(&gur->pordevsr);
+ u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+ MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+ int lane;
+
+ debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
+
+ if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
+ printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
+ return;
+ }
+ for (lane = 0; lane < SRDS1_MAX_LANES; lane++) {
+ enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane];
+ serdes1_prtcl_map |= (1 << lane_prtcl);
+ }
+
+ if (srds_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) {
+ printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
+ return;
+ }
+
+ for (lane = 0; lane < SRDS2_MAX_LANES; lane++) {
+ enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds_cfg][lane];
+ serdes2_prtcl_map |= (1 << lane_prtcl);
+ }
+
+ if (pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)
+ serdes2_prtcl_map &= ~(1 << SGMII_TSEC1);
+
+ if (pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)
+ serdes2_prtcl_map &= ~(1 << SGMII_TSEC3);
+}
diff --git a/arch/ppc/mach-mpc8xxx/mpc85xx/p2020_serdes.c b/arch/ppc/mach-mpc8xxx/mpc85xx/p2020_serdes.c
new file mode 100644
index 0000000..877c093
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/mpc85xx/p2020_serdes.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <mach/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+#define SRDS1_MAX_LANES 4
+
+static u32 serdes1_prtcl_map;
+
+static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = {
+ [0x0] = {PCIE1, NONE, NONE, NONE},
+ [0x2] = {PCIE1, PCIE2, PCIE3, PCIE3},
+ [0x4] = {PCIE1, PCIE1, PCIE3, PCIE3},
+ [0x6] = {PCIE1, PCIE1, PCIE1, PCIE1},
+ [0x7] = {SRIO2, SRIO1, NONE, NONE},
+ [0x8] = {SRIO2, SRIO2, SRIO2, SRIO2},
+ [0x9] = {SRIO2, SRIO2, SRIO2, SRIO2},
+ [0xa] = {SRIO2, SRIO2, SRIO2, SRIO2},
+ [0xb] = {SRIO2, SRIO1, SGMII_TSEC2, SGMII_TSEC3},
+ [0xc] = {SRIO2, SRIO1, SGMII_TSEC2, SGMII_TSEC3},
+ [0xd] = {PCIE1, SRIO1, SGMII_TSEC2, SGMII_TSEC3},
+ [0xe] = {PCIE1, PCIE2, SGMII_TSEC2, SGMII_TSEC3},
+ [0xf] = {PCIE1, PCIE1, SGMII_TSEC2, SGMII_TSEC3},
+};
+
+int is_serdes_configured(enum srds_prtcl prtcl)
+{
+ return (1 << prtcl) & serdes1_prtcl_map;
+}
+
+void fsl_serdes_init(void)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 pordevsr = in_be32(&gur->pordevsr);
+ u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+ MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+ int lane;
+
+ debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
+
+ if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
+ printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
+ return;
+ }
+
+ for (lane = 0; lane < SRDS1_MAX_LANES; lane++) {
+ enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane];
+ serdes1_prtcl_map |= (1 << lane_prtcl);
+ }
+}
diff --git a/arch/ppc/mach-mpc8xxx/mpc85xx/release.S b/arch/ppc/mach-mpc8xxx/mpc85xx/release.S
new file mode 100644
index 0000000..bc31a18
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/mpc85xx/release.S
@@ -0,0 +1,317 @@
+/*
+ * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ * Kumar Gala <kumar.gala@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/config_mpc85xx.h>
+#include <mach/mpc85xx.h>
+
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <mach/ppc_asm.tmpl>
+#include <asm/ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+/* To boot secondary cpus, we need a place for them to start up.
+ * Normally, they start at 0xfffffffc, but that's usually the
+ * firmware, and we don't want to have to run the firmware again.
+ * Instead, the primary cpu will set the BPTR to point here to
+ * this page. We then set up the core, and head to
+ * start_secondary. Note that this means that the code below
+ * must never exceed 1023 instructions (the branch at the end
+ * would then be the 1024th).
+ */
+ .globl __secondary_start_page
+ .align 12
+__secondary_start_page:
+/* First do some preliminary setup */
+ lis r3, HID0_EMCP@h /* enable machine check */
+#ifndef CONFIG_E500MC
+ ori r3,r3,HID0_TBEN@l /* enable Timebase */
+#endif
+#ifdef CONFIG_PHYS_64BIT
+ ori r3,r3,HID0_ENMAS7@l /* enable MAS7 updates */
+#endif
+ mtspr SPRN_HID0,r3
+
+#ifndef CONFIG_E500MC
+ li r3,(HID1_ASTME|HID1_ABE)@l /* Addr streaming & broadcast */
+ mfspr r0,PVR
+ andi. r0,r0,0xff
+ cmpwi r0,0x50@l /* if we are rev 5.0 or greater set MBDD */
+ blt 1f
+ /* Set MBDD bit also */
+ ori r3, r3, HID1_MBDD@l
+1:
+ mtspr SPRN_HID1,r3
+#endif
+
+ /* Enable branch prediction */
+ lis r3,BUCSR_ENABLE@h
+ ori r3,r3,BUCSR_ENABLE@l
+ mtspr SPRN_BUCSR,r3
+
+ /* Ensure TB is 0 */
+ li r3,0
+ mttbl r3
+ mttbu r3
+
+ /* Enable/invalidate the I-Cache */
+ lis r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h
+ ori r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l
+ mtspr SPRN_L1CSR1,r2
+1:
+ mfspr r3,SPRN_L1CSR1
+ and. r1,r3,r2
+ bne 1b
+
+ lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h
+ ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l
+ mtspr SPRN_L1CSR1,r3
+ isync
+2:
+ mfspr r3,SPRN_L1CSR1
+ andi. r1,r3,L1CSR1_ICE@l
+ beq 2b
+
+ /* Enable/invalidate the D-Cache */
+ lis r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h
+ ori r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l
+ mtspr SPRN_L1CSR0,r2
+1:
+ mfspr r3,SPRN_L1CSR0
+ and. r1,r3,r2
+ bne 1b
+
+ lis r3,(L1CSR0_CPE|L1CSR0_DCE)@h
+ ori r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l
+ mtspr SPRN_L1CSR0,r3
+ isync
+2:
+ mfspr r3,SPRN_L1CSR0
+ andi. r1,r3,L1CSR0_DCE@l
+ beq 2b
+
+#define toreset(x) (x - __secondary_start_page + 0xfffff000)
+
+ /* get our PIR to figure out our table entry */
+ lis r3,toreset(__spin_table)@h
+ ori r3,r3,toreset(__spin_table)@l
+
+ /* r10 has the base address for the entry */
+ mfspr r0,SPRN_PIR
+#ifdef CONFIG_E500MC
+ rlwinm r4,r0,27,27,31
+#else
+ mr r4,r0
+#endif
+ slwi r8,r4,5
+ add r10,r3,r8
+
+#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
+ /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
+ slwi r8,r4,1
+ addi r8,r8,32
+ mtspr L1CSR2,r8
+#endif
+
+#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22)
+ mfspr r8,L1CSR2
+ oris r8,r8,(L1CSR2_DCWS)@h
+ mtspr L1CSR2,r8
+#endif
+
+#ifdef CONFIG_BACKSIDE_L2_CACHE
+ /* Enable/invalidate the L2 cache */
+ msync
+ lis r2,(L2CSR0_L2FI|L2CSR0_L2LFC)@h
+ ori r2,r2,(L2CSR0_L2FI|L2CSR0_L2LFC)@l
+ mtspr SPRN_L2CSR0,r2
+1:
+ mfspr r3,SPRN_L2CSR0
+ and. r1,r3,r2
+ bne 1b
+
+#ifdef CONFIG_SYS_CACHE_STASHING
+ /* set stash id to (coreID) * 2 + 32 + L2 (1) */
+ addi r3,r8,1
+ mtspr SPRN_L2CSR1,r3
+#endif
+
+ lis r3,CONFIG_SYS_INIT_L2CSR0@h
+ ori r3,r3,CONFIG_SYS_INIT_L2CSR0@l
+ mtspr SPRN_L2CSR0,r3
+ isync
+2:
+ mfspr r3,SPRN_L2CSR0
+ andis. r1,r3,L2CSR0_L2E@h
+ beq 2b
+#endif
+
+#define EPAPR_MAGIC (0x45504150)
+#define ENTRY_ADDR_UPPER 0
+#define ENTRY_ADDR_LOWER 4
+#define ENTRY_R3_UPPER 8
+#define ENTRY_R3_LOWER 12
+#define ENTRY_RESV 16
+#define ENTRY_PIR 20
+#define ENTRY_R6_UPPER 24
+#define ENTRY_R6_LOWER 28
+#define ENTRY_SIZE 32
+
+ /* setup the entry */
+ li r3,0
+ li r8,1
+ stw r0,ENTRY_PIR(r10)
+ stw r3,ENTRY_ADDR_UPPER(r10)
+ stw r8,ENTRY_ADDR_LOWER(r10)
+ stw r3,ENTRY_R3_UPPER(r10)
+ stw r4,ENTRY_R3_LOWER(r10)
+ stw r3,ENTRY_R6_UPPER(r10)
+ stw r3,ENTRY_R6_LOWER(r10)
+
+ /* load r13 with the address of the 'bootpg' in SDRAM */
+ lis r13,toreset(__bootpg_addr)@h
+ ori r13,r13,toreset(__bootpg_addr)@l
+ lwz r13,0(r13)
+
+ /* setup mapping for AS = 1, and jump there */
+ lis r11,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h
+ mtspr SPRN_MAS0,r11
+ lis r11,(MAS1_VALID|MAS1_IPROT)@h
+ ori r11,r11,(MAS1_TS|MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
+ mtspr SPRN_MAS1,r11
+ oris r11,r13,(MAS2_I|MAS2_G)@h
+ ori r11,r13,(MAS2_I|MAS2_G)@l
+ mtspr SPRN_MAS2,r11
+ oris r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@h
+ ori r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@l
+ mtspr SPRN_MAS3,r11
+ tlbwe
+
+ bl 1f
+1: mflr r11
+ /*
+ * OR in 0xfff to create a mask of the bootpg SDRAM address. We use
+ * this mask to fixup the cpu spin table and the address that we want
+ * to jump to, eg change them from 0xfffffxxx to 0x7ffffxxx if the
+ * bootpg is at 0x7ffff000 in SDRAM.
+ */
+ ori r13,r13,0xfff
+ and r11, r11, r13
+ and r10, r10, r13
+
+ addi r11,r11,(2f-1b)
+ mfmsr r13
+ ori r12,r13,MSR_IS|MSR_DS@l
+
+ mtspr SPRN_SRR0,r11
+ mtspr SPRN_SRR1,r12
+ rfi
+
+ /* spin waiting for addr */
+2:
+ lwz r4,ENTRY_ADDR_LOWER(r10)
+ andi. r11,r4,1
+ bne 2b
+ isync
+
+ /* setup IVORs to match fixed offsets */
+#include "fixed_ivor.S"
+
+ /* get the upper bits of the addr */
+ lwz r11,ENTRY_ADDR_UPPER(r10)
+
+ /* setup branch addr */
+ mtspr SPRN_SRR0,r4
+
+ /* mark the entry as released */
+ li r8,3
+ stw r8,ENTRY_ADDR_LOWER(r10)
+
+ /* mask by ~64M to setup our tlb we will jump to */
+ rlwinm r12,r4,0,0,5
+
+ /* setup r3, r4, r5, r6, r7, r8, r9 */
+ lwz r3,ENTRY_R3_LOWER(r10)
+ li r4,0
+ li r5,0
+ lwz r6,ENTRY_R6_LOWER(r10)
+ lis r7,(64*1024*1024)@h
+ li r8,0
+ li r9,0
+
+ /* load up the pir */
+ lwz r0,ENTRY_PIR(r10)
+ mtspr SPRN_PIR,r0
+ mfspr r0,SPRN_PIR
+ stw r0,ENTRY_PIR(r10)
+
+ mtspr IVPR,r12
+/*
+ * Coming here, we know the cpu has one TLB mapping in TLB1[0]
+ * which maps 0xfffff000-0xffffffff one-to-one. We set up a
+ * second mapping that maps addr 1:1 for 64M, and then we jump to
+ * addr
+ */
+ lis r10,(MAS0_TLBSEL(1)|MAS0_ESEL(0))@h
+ mtspr SPRN_MAS0,r10
+ lis r10,(MAS1_VALID|MAS1_IPROT)@h
+ ori r10,r10,(MAS1_TSIZE(BOOKE_PAGESZ_64M))@l
+ mtspr SPRN_MAS1,r10
+ /* WIMGE = 0b00000 for now */
+ mtspr SPRN_MAS2,r12
+ ori r12,r12,(MAS3_SX|MAS3_SW|MAS3_SR)
+ mtspr SPRN_MAS3,r12
+#ifdef CONFIG_ENABLE_36BIT_PHYS
+ mtspr SPRN_MAS7,r11
+#endif
+ tlbwe
+
+/* Now we have another mapping for this page, so we jump to that
+ * mapping
+ */
+ mtspr SPRN_SRR1,r13
+ rfi
+
+ /*
+ * Allocate some space for the SDRAM address of the bootpg.
+ * This variable has to be in the boot page so that it can
+ * be accessed by secondary cores when they come out of reset.
+ */
+ .globl __bootpg_addr
+__bootpg_addr:
+ .long 0
+
+ .align L1_CACHE_SHIFT
+ .globl __spin_table
+__spin_table:
+ .space CONFIG_MAX_CPUS*ENTRY_SIZE
+
+ /* Fill in the empty space. The actual reset vector is
+ * the last word of the page */
+__secondary_start_code_end:
+ .space 4092 - (__secondary_start_code_end - __secondary_start_page)
+__secondary_reset_vector:
+ b __secondary_start_page
diff --git a/arch/ppc/mach-mpc8xxx/mpc85xx/resetvec.S b/arch/ppc/mach-mpc8xxx/mpc85xx/resetvec.S
new file mode 100644
index 0000000..29555d4
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/mpc85xx/resetvec.S
@@ -0,0 +1,2 @@
+ .section .resetvec,"ax"
+ b _start_e500
diff --git a/arch/ppc/mach-mpc8xxx/mpc85xx/speed.c b/arch/ppc/mach-mpc8xxx/mpc85xx/speed.c
new file mode 100644
index 0000000..3992ea4
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/mpc85xx/speed.c
@@ -0,0 +1,213 @@
+/*
+ * Copyright 2004, 2007-2011 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2003 Motorola Inc.
+ * Xianghua Xiao, (X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/ppc_asm.tmpl>
+#include <asm/processor.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* --------------------------------------------------------------- */
+
+void get_sys_info (sys_info_t * sysInfo)
+{
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ uint plat_ratio,e500_ratio,half_freqSystemBus;
+
+#if defined(CONFIG_FSL_LBC)
+ uint lcrr_div;
+#endif
+ int i;
+
+ plat_ratio = (gur->porpllsr) & 0x0000003e;
+ plat_ratio >>= 1;
+ sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
+
+ /* Divide before multiply to avoid integer
+ * overflow for processor speeds above 2GHz */
+ half_freqSystemBus = sysInfo->freqSystemBus/2;
+ for (i = 0; i < cpu_numcores(); i++) {
+ e500_ratio = ((gur->porpllsr) >> (i * 8 + 16)) & 0x3f;
+ sysInfo->freqProcessor[i] = e500_ratio * half_freqSystemBus;
+ }
+
+ /* Note: freqDDRBus is the MCLK frequency, not the data rate. */
+ sysInfo->freqDDRBus = sysInfo->freqSystemBus;
+
+#ifdef CONFIG_DDR_CLK_FREQ
+ {
+ u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+ >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
+ if (ddr_ratio != 0x7)
+ sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
+ }
+#endif
+
+#if defined(CONFIG_FSL_LBC)
+#if defined(CONFIG_SYS_LBC_LCRR)
+ /* We will program LCRR to this value later */
+ lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
+#else
+ lcrr_div = in_be32(&(LBC_BASE_ADDR)->lcrr) & LCRR_CLKDIV;
+#endif
+ if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
+#if defined(CONFIG_FSL_CORENET)
+ /* If this is corenet based SoC, bit-representation
+ * for four times the clock divider values.
+ */
+ lcrr_div *= 4;
+#elif !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8541) && \
+ !defined(CONFIG_MPC8555) && !defined(CONFIG_MPC8560)
+ /*
+ * Yes, the entire PQ38 family use the same
+ * bit-representation for twice the clock divider values.
+ */
+ lcrr_div *= 2;
+#endif
+ sysInfo->freqLocalBus = sysInfo->freqSystemBus / lcrr_div;
+ } else {
+ /* In case anyone cares what the unknown value is */
+ sysInfo->freqLocalBus = lcrr_div;
+ }
+#endif
+}
+
+
+int get_clocks (void)
+{
+ sys_info_t sys_info;
+#ifdef CONFIG_MPC8544
+ volatile ccsr_gur_t *gur = (void *) CONFIG_SYS_MPC85xx_GUTS_ADDR;
+#endif
+ get_sys_info (&sys_info);
+
+ gd->cpu_clk = sys_info.freqProcessor[0];
+ gd->bus_clk = sys_info.freqSystemBus;
+ gd->mem_clk = sys_info.freqDDRBus;
+ gd->lbc_clk = sys_info.freqLocalBus;
+
+#ifdef CONFIG_QE
+ gd->qe_clk = sys_info.freqQE;
+ gd->brg_clk = gd->qe_clk / 2;
+#endif
+ /*
+ * The base clock for I2C depends on the actual SOC. Unfortunately,
+ * there is no pattern that can be used to determine the frequency, so
+ * the only choice is to look up the actual SOC number and use the value
+ * for that SOC. This information is taken from application note
+ * AN2919.
+ */
+#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+ defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555)
+ gd->i2c1_clk = sys_info.freqSystemBus;
+#elif defined(CONFIG_MPC8544)
+ /*
+ * On the 8544, the I2C clock is the same as the SEC clock. This can be
+ * either CCB/2 or CCB/3, depending on the value of cfg_sec_freq. See
+ * 4.4.3.3 of the 8544 RM. Note that this might actually work for all
+ * 85xx, but only the 8544 has cfg_sec_freq, so it's unknown if the
+ * PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544.
+ */
+ if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
+ gd->i2c1_clk = sys_info.freqSystemBus / 3;
+ else
+ gd->i2c1_clk = sys_info.freqSystemBus / 2;
+#else
+ /* Most 85xx SOCs use CCB/2, so this is the default behavior. */
+ gd->i2c1_clk = sys_info.freqSystemBus / 2;
+#endif
+ gd->i2c2_clk = gd->i2c1_clk;
+
+#if defined(CONFIG_FSL_ESDHC)
+#ifdef CONFIG_MPC8569
+ gd->sdhc_clk = gd->bus_clk;
+#else
+ gd->sdhc_clk = gd->bus_clk / 2;
+#endif
+#endif /* defined(CONFIG_FSL_ESDHC) */
+
+#if defined(CONFIG_CPM2)
+ gd->vco_out = 2*sys_info.freqSystemBus;
+ gd->cpm_clk = gd->vco_out / 2;
+ gd->scc_clk = gd->vco_out / 4;
+ gd->brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
+#endif
+
+ if (gd->cpu_clk != 0)
+ return 0;
+ else
+ return 1;
+}
+
+
+/********************************************
+ * get_bus_freq
+ * return system bus freq in Hz
+ *********************************************/
+unsigned long get_bus_freq (ulong dummy)
+{
+ sys_info_t sys_info;
+
+ get_sys_info (&sys_info);
+
+ return sys_info.freqSystemBus;
+}
+
+/********************************************
+ * get_ddr_freq
+ * return ddr bus freq in Hz
+ *********************************************/
+unsigned long get_ddr_freq (ulong dummy)
+{
+ sys_info_t sys_info;
+
+ get_sys_info (&sys_info);
+
+ return sys_info.freqDDRBus;
+}
+
+/********************************************
+ * get_i2c_freq
+ * return i2c bus freq in Hz
+ * Assume all I2C bus have the same frequency
+ *********************************************/
+unsigned long get_i2c_freq (ulong dummy)
+{
+ sys_info_t sys_info;
+ volatile ccsr_gur_t *gur = (void *) CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+
+ get_sys_info (&sys_info);
+
+ if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
+ return sys_info.freqSystemBus / 3;
+ else
+ return sys_info.freqSystemBus / 2;
+}
diff --git a/arch/ppc/mach-mpc8xxx/mpc85xx/start.S b/arch/ppc/mach-mpc8xxx/mpc85xx/start.S
new file mode 100644
index 0000000..0bdda21
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/mpc85xx/start.S
@@ -0,0 +1,1236 @@
+/*
+ * Copyright 2004, 2007-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2003 Motorola,Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* U-Boot Startup Code for Motorola 85xx PowerPC based Embedded Boards
+ *
+ * The processor starts at 0xfffffffc and the code is first executed in the
+ * last 4K page(0xfffff000-0xffffffff) in flash/rom.
+ *
+ */
+
+#include <config.h>
+#include <asm/config.h>
+#include <mach/mpc85xx.h>
+
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <asm/processor.h>
+#include <mach/ppc_asm.tmpl>
+#include <asm/ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING ""
+#endif
+
+#undef MSR_KERNEL
+#define MSR_KERNEL ( MSR_ME ) /* Machine Check */
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r12 to access the GOT
+ */
+ START_GOT
+ GOT_ENTRY(_GOT2_TABLE_)
+ GOT_ENTRY(_FIXUP_TABLE_)
+
+#ifndef CONFIG_NAND_SPL
+ GOT_ENTRY(_start)
+ GOT_ENTRY(_start_of_vectors)
+ GOT_ENTRY(_end_of_vectors)
+ GOT_ENTRY(transfer_to_handler)
+#endif
+
+ GOT_ENTRY(__init_end)
+ GOT_ENTRY(_end)
+ GOT_ENTRY(__bss_start)
+ END_GOT
+
+/*
+ * e500 Startup -- after reset only the last 4KB of the effective
+ * address space is mapped in the MMU L2 TLB1 Entry0. The .bootpg
+ * section is located at THIS LAST page and basically does three
+ * things: clear some registers, set up exception tables and
+ * add more TLB entries for 'larger spaces'(e.g. the boot rom) to
+ * continue the boot procedure.
+
+ * Once the boot rom is mapped by TLB entries we can proceed
+ * with normal startup.
+ *
+ */
+
+ .section .bootpg,"ax"
+ .globl _start_e500
+
+_start_e500:
+
+/* clear registers/arrays not reset by hardware */
+
+ /* L1 */
+ li r0,2
+ mtspr L1CSR0,r0 /* invalidate d-cache */
+ mtspr L1CSR1,r0 /* invalidate i-cache */
+
+ mfspr r1,DBSR
+ mtspr DBSR,r1 /* Clear all valid bits */
+
+ /*
+ * Enable L1 Caches early
+ *
+ */
+
+#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
+ /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
+ li r2,(32 + 0)
+ mtspr L1CSR2,r2
+#endif
+
+ /* Enable/invalidate the I-Cache */
+ lis r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h
+ ori r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l
+ mtspr SPRN_L1CSR1,r2
+1:
+ mfspr r3,SPRN_L1CSR1
+ and. r1,r3,r2
+ bne 1b
+
+ lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h
+ ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l
+ mtspr SPRN_L1CSR1,r3
+ isync
+2:
+ mfspr r3,SPRN_L1CSR1
+ andi. r1,r3,L1CSR1_ICE@l
+ beq 2b
+
+ /* Enable/invalidate the D-Cache */
+ lis r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h
+ ori r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l
+ mtspr SPRN_L1CSR0,r2
+1:
+ mfspr r3,SPRN_L1CSR0
+ and. r1,r3,r2
+ bne 1b
+
+ lis r3,(L1CSR0_CPE|L1CSR0_DCE)@h
+ ori r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l
+ mtspr SPRN_L1CSR0,r3
+ isync
+2:
+ mfspr r3,SPRN_L1CSR0
+ andi. r1,r3,L1CSR0_DCE@l
+ beq 2b
+
+ /* Setup interrupt vectors */
+ lis r1,TEXT_BASE@h
+ mtspr IVPR,r1
+
+ li r1,0x0100
+ mtspr IVOR0,r1 /* 0: Critical input */
+ li r1,0x0200
+ mtspr IVOR1,r1 /* 1: Machine check */
+ li r1,0x0300
+ mtspr IVOR2,r1 /* 2: Data storage */
+ li r1,0x0400
+ mtspr IVOR3,r1 /* 3: Instruction storage */
+ li r1,0x0500
+ mtspr IVOR4,r1 /* 4: External interrupt */
+ li r1,0x0600
+ mtspr IVOR5,r1 /* 5: Alignment */
+ li r1,0x0700
+ mtspr IVOR6,r1 /* 6: Program check */
+ li r1,0x0800
+ mtspr IVOR7,r1 /* 7: floating point unavailable */
+ li r1,0x0900
+ mtspr IVOR8,r1 /* 8: System call */
+ /* 9: Auxiliary processor unavailable(unsupported) */
+ li r1,0x0a00
+ mtspr IVOR10,r1 /* 10: Decrementer */
+ li r1,0x0b00
+ mtspr IVOR11,r1 /* 11: Interval timer */
+ li r1,0x0c00
+ mtspr IVOR12,r1 /* 12: Watchdog timer */
+ li r1,0x0d00
+ mtspr IVOR13,r1 /* 13: Data TLB error */
+ li r1,0x0e00
+ mtspr IVOR14,r1 /* 14: Instruction TLB error */
+ li r1,0x0f00
+ mtspr IVOR15,r1 /* 15: Debug */
+
+ /* Clear and set up some registers. */
+ li r0,0x0000
+ lis r1,0xffff
+ mtspr DEC,r0 /* prevent dec exceptions */
+ mttbl r0 /* prevent fit & wdt exceptions */
+ mttbu r0
+ mtspr TSR,r1 /* clear all timer exception status */
+ mtspr TCR,r0 /* disable all */
+ mtspr ESR,r0 /* clear exception syndrome register */
+ mtspr MCSR,r0 /* machine check syndrome register */
+ mtxer r0 /* clear integer exception register */
+
+#ifdef CONFIG_SYS_BOOK3E_HV
+ mtspr MAS8,r0 /* make sure MAS8 is clear */
+#endif
+
+ /* Enable Time Base and Select Time Base Clock */
+ lis r0,HID0_EMCP@h /* Enable machine check */
+#if defined(CONFIG_ENABLE_36BIT_PHYS)
+ ori r0,r0,HID0_ENMAS7@l /* Enable MAS7 */
+#endif
+#ifndef CONFIG_E500MC
+ ori r0,r0,HID0_TBEN@l /* Enable Timebase */
+#endif
+ mtspr HID0,r0
+
+#ifndef CONFIG_E500MC
+ li r0,(HID1_ASTME|HID1_ABE)@l /* Addr streaming & broadcast */
+ mfspr r3,PVR
+ andi. r3,r3, 0xff
+ cmpwi r3,0x50@l /* if we are rev 5.0 or greater set MBDD */
+ blt 1f
+ /* Set MBDD bit also */
+ ori r0, r0, HID1_MBDD@l
+1:
+ mtspr HID1,r0
+#endif
+
+ /* Enable Branch Prediction */
+#if defined(CONFIG_BTB)
+ lis r0,BUCSR_ENABLE@h
+ ori r0,r0,BUCSR_ENABLE@l
+ mtspr SPRN_BUCSR,r0
+#endif
+
+#if defined(CONFIG_SYS_INIT_DBCR)
+ lis r1,0xffff
+ ori r1,r1,0xffff
+ mtspr DBSR,r1 /* Clear all status bits */
+ lis r0,CONFIG_SYS_INIT_DBCR@h /* DBCR0[IDM] must be set */
+ ori r0,r0,CONFIG_SYS_INIT_DBCR@l
+ mtspr DBCR0,r0
+#endif
+
+#ifdef CONFIG_MPC8569
+#define CONFIG_SYS_LBC_ADDR (CONFIG_SYS_CCSRBAR_DEFAULT + 0x5000)
+#define CONFIG_SYS_LBCR_ADDR (CONFIG_SYS_LBC_ADDR + 0xd0)
+
+ /* MPC8569 Rev.0 silcon needs to set bit 13 of LBCR to allow elBC to
+ * use address space which is more than 12bits, and it must be done in
+ * the 4K boot page. So we set this bit here.
+ */
+
+ /* create a temp mapping TLB0[0] for LBCR */
+ lis r6,FSL_BOOKE_MAS0(0, 0, 0)@h
+ ori r6,r6,FSL_BOOKE_MAS0(0, 0, 0)@l
+
+ lis r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
+ ori r7,r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l
+
+ lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@h
+ ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@l
+
+ lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
+ (MAS3_SX|MAS3_SW|MAS3_SR))@h
+ ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
+ (MAS3_SX|MAS3_SW|MAS3_SR))@l
+
+ mtspr MAS0,r6
+ mtspr MAS1,r7
+ mtspr MAS2,r8
+ mtspr MAS3,r9
+ isync
+ msync
+ tlbwe
+
+ /* Set LBCR register */
+ lis r4,CONFIG_SYS_LBCR_ADDR@h
+ ori r4,r4,CONFIG_SYS_LBCR_ADDR@l
+
+ lis r5,CONFIG_SYS_LBC_LBCR@h
+ ori r5,r5,CONFIG_SYS_LBC_LBCR@l
+ stw r5,0(r4)
+ isync
+
+ /* invalidate this temp TLB */
+ lis r4,CONFIG_SYS_LBC_ADDR@h
+ ori r4,r4,CONFIG_SYS_LBC_ADDR@l
+ tlbivax 0,r4
+ isync
+
+#endif /* CONFIG_MPC8569 */
+
+ lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h
+ ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l
+
+#ifndef CONFIG_SYS_RAMBOOT
+ /* create a temp mapping in AS=1 to the 4M boot window */
+ lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h
+ ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l
+
+ lis r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h
+ ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l
+
+ /* The 85xx has the default boot window 0xff800000 - 0xffffffff */
+ lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+ ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+#else
+ /*
+ * create a temp mapping in AS=1 to the 1M TEXT_BASE space, the main
+ * image has been relocated to TEXT_BASE on the second stage.
+ */
+ lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
+ ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
+
+ lis r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h
+ ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l
+
+ lis r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+ ori r9,r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+#endif
+
+ mtspr MAS0,r6
+ mtspr MAS1,r7
+ mtspr MAS2,r8
+ mtspr MAS3,r9
+ isync
+ msync
+ tlbwe
+
+ /* create a temp mapping in AS=1 to the stack */
+ lis r6,FSL_BOOKE_MAS0(1, 14, 0)@h
+ ori r6,r6,FSL_BOOKE_MAS0(1, 14, 0)@l
+
+ lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@h
+ ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@l
+
+ lis r8,FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)@h
+ ori r8,r8,FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)@l
+
+#if defined(CFG_INIT_RAM_ADDR_PHYS_LOW) && \
+ defined(CFG_INIT_RAM_ADDR_PHYS_HIGH)
+ lis r9,FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR_PHYS_LOW, 0,
+ (MAS3_SX|MAS3_SW|MAS3_SR))@h
+ ori r9,r9,FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR_PHYS_LOW, 0,
+ (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ li r10,CFG_INIT_RAM_ADDR_PHYS_HIGH
+ mtspr MAS7,r10
+#else
+ lis r9,FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+ ori r9,r9,FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+#endif
+
+ mtspr MAS0,r6
+ mtspr MAS1,r7
+ mtspr MAS2,r8
+ mtspr MAS3,r9
+ isync
+ msync
+ tlbwe
+
+ lis r6,MSR_IS|MSR_DS@h
+ ori r6,r6,MSR_IS|MSR_DS@l
+ lis r7,switch_as@h
+ ori r7,r7,switch_as@l
+
+ mtspr SPRN_SRR0,r7
+ mtspr SPRN_SRR1,r6
+ rfi
+
+switch_as:
+/* L1 DCache is used for initial RAM */
+
+ /* Allocate Initial RAM in data cache.
+ */
+ lis r3,CFG_INIT_RAM_ADDR@h
+ ori r3,r3,CFG_INIT_RAM_ADDR@l
+ mfspr r2, L1CFG0
+ andi. r2, r2, 0x1ff
+ /* cache size * 1024 / (2 * L1 line size) */
+ slwi r2, r2, (10 - 1 - L1_CACHE_SHIFT)
+ mtctr r2
+ li r0,0
+1:
+ dcbz r0,r3
+ dcbtls 0,r0,r3
+ addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
+ bdnz 1b
+
+ /* Jump out the last 4K page and continue to 'normal' start */
+#ifdef CONFIG_SYS_RAMBOOT
+ b _start_cont
+#else
+ /* Calculate absolute address in FLASH and jump there */
+ /*--------------------------------------------------------------*/
+ lis r3,TEXT_BASE@h
+ ori r3,r3,TEXT_BASE@l
+ addi r3,r3,_start_cont - _start + _START_OFFSET
+ mtlr r3
+ blr
+#endif
+
+ .text
+ .globl _start
+_start:
+ .long 0x62626F78 /* Barebox Magic Number */
+
+ .align 4
+ .globl _start_cont
+_start_cont:
+ /* Setup the stack in initial RAM,could be L2-as-SRAM or L1 dcache*/
+ lis r1,CFG_INIT_RAM_ADDR@h
+ ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET@l
+
+ li r0,0
+ stwu r0,-4(r1)
+ stwu r0,-4(r1) /* Terminate call chain */
+
+ stwu r1,-8(r1) /* Save back chain and move SP */
+ lis r0,RESET_VECTOR@h /* Address of reset vector */
+ ori r0,r0,RESET_VECTOR@l
+ stwu r1,-8(r1) /* Save back chain and move SP */
+ stw r0,+12(r1) /* Save return addr (underflow vect) */
+
+ GET_GOT
+ bl cpu_init_early_f
+
+ /* switch back to AS = 0 */
+ lis r3,(MSR_CE|MSR_ME|MSR_DE)@h
+ ori r3,r3,(MSR_CE|MSR_ME|MSR_DE)@l
+ mtmsr r3
+ isync
+
+ bl cpu_init_f
+ bl initdram
+ b relocate_code
+ isync
+
+ /* NOTREACHED - board_init_f() does not return */
+
+#ifndef CONFIG_NAND_SPL
+ . = EXC_OFF_SYS_RESET
+ .globl _start_of_vectors
+_start_of_vectors:
+
+/* Critical input. */
+ CRIT_EXCEPTION(0x0100, CriticalInput, CritcalInputException)
+
+/* Machine check */
+ MCK_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+
+/* Data Storage exception. */
+ STD_EXCEPTION(0x0300, DataStorage, UnknownException)
+
+/* Instruction Storage exception. */
+ STD_EXCEPTION(0x0400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+#ifdef CONFIG_USE_IRQ
+ STD_EXCEPTION(0x0500, ExtInterrupt, ExtIntException)
+#endif
+
+/* Alignment exception. */
+ . = 0x0600
+Alignment:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ mfspr r4,DAR
+ stw r4,_DAR(r21)
+ mfspr r5,DSISR
+ stw r5,_DSISR(r21)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
+
+/* Program check exception */
+ . = 0x0700
+ProgramCheck:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
+ MSR_KERNEL, COPY_EE)
+
+ /* No FPU on MPC85xx. This exception is not supposed to happen.
+ */
+ STD_EXCEPTION(0x0800, FPUnavailable, UnknownException)
+
+ . = 0x0900
+/*
+ * r0 - SYSCALL number
+ * r3-... arguments
+ */
+SystemCall:
+ addis r11,r0,0 /* get functions table addr */
+ ori r11,r11,0 /* Note: this code is patched in trap_init */
+ addis r12,r0,0 /* get number of functions */
+ ori r12,r12,0
+
+ cmplw 0,r0,r12
+ bge 1f
+
+ rlwinm r0,r0,2,0,31 /* fn_addr = fn_tbl[r0] */
+ add r11,r11,r0
+ lwz r11,0(r11)
+
+ li r20,0xd00-4 /* Get stack pointer */
+ lwz r12,0(r20)
+ subi r12,r12,12 /* Adjust stack pointer */
+ li r0,0xc00+_end_back-SystemCall
+ cmplw 0,r0,r12 /* Check stack overflow */
+ bgt 1f
+ stw r12,0(r20)
+
+ mflr r0
+ stw r0,0(r12)
+ mfspr r0,SRR0
+ stw r0,4(r12)
+ mfspr r0,SRR1
+ stw r0,8(r12)
+
+ li r12,0xc00+_back-SystemCall
+ mtlr r12
+ mtspr SRR0,r11
+
+1: SYNC
+ rfi
+_back:
+
+ mfmsr r11 /* Disable interrupts */
+ li r12,0
+ ori r12,r12,MSR_EE
+ andc r11,r11,r12
+ SYNC /* Some chip revs need this... */
+ mtmsr r11
+ SYNC
+
+ li r12,0xd00-4 /* restore regs */
+ lwz r12,0(r12)
+
+ lwz r11,0(r12)
+ mtlr r11
+ lwz r11,4(r12)
+ mtspr SRR0,r11
+ lwz r11,8(r12)
+ mtspr SRR1,r11
+
+ addi r12,r12,12 /* Adjust stack pointer */
+ li r20,0xd00-4
+ stw r12,0(r20)
+
+ SYNC
+ rfi
+_end_back:
+
+#ifdef CONFIG_USE_IRQ
+ STD_EXCEPTION(0x0a00, Decrementer, timer_interrupt)
+#else
+ STD_EXCEPTION(0x0a00, Decrementer, UnknownException)
+#endif
+ STD_EXCEPTION(0x0b00, IntervalTimer, UnknownException)
+ STD_EXCEPTION(0x0c00, WatchdogTimer, UnknownException)
+
+ STD_EXCEPTION(0x0d00, DataTLBError, UnknownException)
+ STD_EXCEPTION(0x0e00, InstructionTLBError, UnknownException)
+
+ CRIT_EXCEPTION(0x0f00, DebugBreakpoint, DebugException )
+
+ .globl _end_of_vectors
+_end_of_vectors:
+
+
+ . = . + (0x100 - ( . & 0xff )) /* align for debug */
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+ .globl transfer_to_handler
+transfer_to_handler:
+ stw r22,_NIP(r21)
+ lis r22,MSR_POW@h
+ andc r23,r23,r22
+ stw r23,_MSR(r21)
+ SAVE_GPR(7, r21)
+ SAVE_4GPRS(8, r21)
+ SAVE_8GPRS(12, r21)
+ SAVE_8GPRS(24, r21)
+
+ mflr r23
+ andi. r24,r23,0x3f00 /* get vector offset */
+ stw r24,TRAP(r21)
+ li r22,0
+ stw r22,RESULT(r21)
+ mtspr SPRG2,r22 /* r1 is now kernel sp */
+
+ lwz r24,0(r23) /* virtual address of handler */
+ lwz r23,4(r23) /* where to go when done */
+ mtspr SRR0,r24
+ mtspr SRR1,r20
+ mtlr r23
+ SYNC
+ rfi /* jump to handler, enable MMU */
+
+int_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SRR0,r2
+ mtspr SRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfi
+
+crit_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SPRN_CSRR0,r2
+ mtspr SPRN_CSRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfci
+
+mck_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SPRN_MCSRR0,r2
+ mtspr SPRN_MCSRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfmci
+
+/* Cache functions.
+*/
+.globl invalidate_icache
+invalidate_icache:
+ mfspr r0,L1CSR1
+ ori r0,r0,L1CSR1_ICFI
+ msync
+ isync
+ mtspr L1CSR1,r0
+ isync
+ blr /* entire I cache */
+
+.globl invalidate_dcache
+invalidate_dcache:
+ mfspr r0,L1CSR0
+ ori r0,r0,L1CSR0_DCFI
+ msync
+ isync
+ mtspr L1CSR0,r0
+ isync
+ blr
+
+ .globl icache_enable
+icache_enable:
+ mflr r8
+ bl invalidate_icache
+ mtlr r8
+ isync
+ mfspr r4,L1CSR1
+ ori r4,r4,0x0001
+ oris r4,r4,0x0001
+ mtspr L1CSR1,r4
+ isync
+ blr
+
+ .globl icache_disable
+icache_disable:
+ mfspr r0,L1CSR1
+ lis r3,0
+ ori r3,r3,L1CSR1_ICE
+ andc r0,r0,r3
+ mtspr L1CSR1,r0
+ isync
+ blr
+
+ .globl icache_status
+icache_status:
+ mfspr r3,L1CSR1
+ andi. r3,r3,L1CSR1_ICE
+ blr
+
+ .globl dcache_enable
+dcache_enable:
+ mflr r8
+ bl invalidate_dcache
+ mtlr r8
+ isync
+ mfspr r0,L1CSR0
+ ori r0,r0,0x0001
+ oris r0,r0,0x0001
+ msync
+ isync
+ mtspr L1CSR0,r0
+ isync
+ blr
+
+ .globl dcache_disable
+dcache_disable:
+ mfspr r3,L1CSR0
+ lis r4,0
+ ori r4,r4,L1CSR0_DCE
+ andc r3,r3,r4
+ mtspr L1CSR0,r3
+ isync
+ blr
+
+ .globl dcache_status
+dcache_status:
+ mfspr r3,L1CSR0
+ andi. r3,r3,L1CSR0_DCE
+ blr
+
+ .globl get_pir
+get_pir:
+ mfspr r3,PIR
+ blr
+
+ .globl get_pvr
+get_pvr:
+ mfspr r3,PVR
+ blr
+
+ .globl get_svr
+get_svr:
+ mfspr r3,SVR
+ blr
+
+ .globl wr_tcr
+wr_tcr:
+ mtspr TCR,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in8 */
+/* Description: Input 8 bits */
+/*------------------------------------------------------------------------------- */
+ .globl in8
+in8:
+ lbz r3,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out8 */
+/* Description: Output 8 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out8
+out8:
+ stb r4,0x0000(r3)
+ sync
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out16 */
+/* Description: Output 16 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out16
+out16:
+ sth r4,0x0000(r3)
+ sync
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out16r */
+/* Description: Byte reverse and output 16 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out16r
+out16r:
+ sthbrx r4,r0,r3
+ sync
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out32 */
+/* Description: Output 32 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out32
+out32:
+ stw r4,0x0000(r3)
+ sync
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out32r */
+/* Description: Byte reverse and output 32 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out32r
+out32r:
+ stwbrx r4,r0,r3
+ sync
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in16 */
+/* Description: Input 16 bits */
+/*------------------------------------------------------------------------------- */
+ .globl in16
+in16:
+ lhz r3,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in16r */
+/* Description: Input 16 bits and byte reverse */
+/*------------------------------------------------------------------------------- */
+ .globl in16r
+in16r:
+ lhbrx r3,r0,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in32 */
+/* Description: Input 32 bits */
+/*------------------------------------------------------------------------------- */
+ .globl in32
+in32:
+ lwz 3,0x0000(3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in32r */
+/* Description: Input 32 bits and byte reverse */
+/*------------------------------------------------------------------------------- */
+ .globl in32r
+in32r:
+ lwbrx r3,r0,r3
+ blr
+#endif /* !CONFIG_NAND_SPL */
+
+/*------------------------------------------------------------------------------*/
+
+/*
+ * void write_tlb(mas0, mas1, mas2, mas3, mas7)
+ */
+ .globl write_tlb
+write_tlb:
+ mtspr MAS0,r3
+ mtspr MAS1,r4
+ mtspr MAS2,r5
+ mtspr MAS3,r6
+#ifdef CONFIG_ENABLE_36BIT_PHYS
+ mtspr MAS7,r7
+#endif
+ li r3,0
+#ifdef CONFIG_SYS_BOOK3E_HV
+ mtspr MAS8,r3
+#endif
+ isync
+ tlbwe
+ msync
+ isync
+ blr
+
+/*
+ * void relocate_code (end of ram)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+ mr r9, r3 /* Save end of RAM */
+
+ lis r10, (_end - _start)@h /* Size */
+ ori r10, r10, (_end - _start)@l
+ sub r3, r3, r10
+
+ /* 64KB aligned */
+ lis r10, 0xffff0000@h
+ ori r10, r10, 0xffff0000@l
+ and r3, r3, r10
+
+ mr r1, r3 /* Set new stack just below barebox code */
+ mr r10, r3 /* Save copy of Destination Address */
+
+ bl calc_source
+calc_source:
+ mfspr r4, LR /* r4 = address in memory (flash, RAM) */
+ subi r4, r4, (calc_source - _start)
+
+ GET_GOT
+ lis r5, __init_size@h
+ ori r5, r5, __init_size@l
+
+ li r6,CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
+
+ /*
+ * Fix GOT pointer:
+ *
+ * New GOT-PTR = (old GOT-PTR - TEXT_BASE) + Destination Address
+ *
+ * Offset:
+ */
+ sub r15,r10,r4
+
+ /* First our own GOT */
+ add r12,r12,r15
+ /*add r14,r14,r15 */
+ /* then the one used by the C code */
+ add r30,r30,r15
+
+ /*
+ * Now relocate code
+ */
+
+ cmplw cr1,r3,r4
+ addi r0,r5,3
+ srwi. r0,r0,2
+ beq cr1,4f /* In place copy is not necessary */
+ beq 7f /* Protect against 0 count */
+ mtctr r0
+ bge cr1,2f
+
+ la r8,-4(r4)
+ la r7,-4(r3)
+1: lwzu r0,4(r8)
+ stwu r0,4(r7)
+ bdnz 1b
+ b 4f
+
+2: slwi r0,r0,2
+ add r8,r4,r0
+ add r7,r3,r0
+3: lwzu r0,-4(r8)
+ stwu r0,-4(r7)
+ bdnz 3b
+
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+4: cmpwi r6,0
+ add r5,r3,r5
+ beq 7f /* Always flush prefetch queue in any case */
+ subi r0,r6,1
+ andc r3,r3,r0
+ mr r4,r3
+5: dcbst 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 5b
+ sync /* Wait for all dcbst to complete on bus */
+ mr r4,r3
+6: icbi 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 6b
+7: sync /* Wait for all icbi to complete on bus */
+ isync
+
+ /*
+ * Re-point the IVPR at RAM
+ */
+ mtspr IVPR,r10
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+
+ addi r0,r10,in_ram - _start + _START_OFFSET
+ mtlr r0
+ blr /* NEVER RETURNS! */
+
+ .globl in_ram
+in_ram:
+
+ /*
+ * Relocation Function, r12 point to got2+0x8000
+ *
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
+ */
+ li r0,__got2_entries@sectoff@l
+ la r3,GOT(_GOT2_TABLE_)
+ lwz r11,GOT(_GOT2_TABLE_)
+ mtctr r0
+ sub r11,r3,r11
+ addi r3,r3,-4
+1: lwzu r0,4(r3)
+ cmpwi r0,0
+ beq- 2f
+ add r0,r0,r11
+ stw r0,0(r3)
+2: bdnz 1b
+
+ /*
+ * Now adjust the fixups and the pointers to the fixups
+ * in case we need to move ourselves again.
+ */
+ li r0,__fixup_entries@sectoff@l
+ lwz r3,GOT(_FIXUP_TABLE_)
+ cmpwi r0,0
+ mtctr r0
+ addi r3,r3,-4
+ beq 4f
+3: lwzu r4,4(r3)
+ lwzux r0,r4,r11
+ cmpwi r0,0
+ add r0,r0,r11
+ stw r4,0(r3)
+ beq- 5f
+ stw r0,0(r4)
+5: bdnz 3b
+4:
+clear_bss:
+ /*
+ * Now clear BSS segment
+ */
+ lwz r3,GOT(__bss_start)
+ lwz r4,GOT(_end)
+
+ cmplw 0,r3,r4
+ beq 6f
+
+ li r0,0
+5:
+ stw r0,0(r3)
+ addi r3,r3,4
+ cmplw 0,r3,r4
+ bne 5b
+6:
+
+#if 0
+ mr r3,r9 /* Init Data pointer */
+ mr r4,r10 /* Destination Address */
+#endif
+ mr r3, r10 /* Destination Address */
+ bl board_init_r
+
+#ifndef CONFIG_NAND_SPL
+ /*
+ * Copy exception vector code to low memory
+ *
+ * r3: dest_addr
+ * r7: source address, r8: end address, r9: target address
+ */
+ .globl trap_init
+trap_init:
+ mflr r4 /* save link register */
+ GET_GOT
+ lwz r7,GOT(_start_of_vectors)
+ lwz r8,GOT(_end_of_vectors)
+
+ li r9,0x100 /* reset vector always at 0x100 */
+
+ cmplw 0,r7,r8
+ bgelr /* return if r7>=r8 - just in case */
+1:
+ lwz r0,0(r7)
+ stw r0,0(r9)
+ addi r7,r7,4
+ addi r9,r9,4
+ cmplw 0,r7,r8
+ bne 1b
+
+ /*
+ * relocate `hdlr' and `int_return' entries
+ */
+ li r7,.L_CriticalInput - _start + _START_OFFSET
+ bl trap_reloc
+ li r7,.L_MachineCheck - _start + _START_OFFSET
+ bl trap_reloc
+ li r7,.L_DataStorage - _start + _START_OFFSET
+ bl trap_reloc
+ li r7,.L_InstStorage - _start + _START_OFFSET
+ bl trap_reloc
+#ifdef CONFIG_USE_IRQ
+ li r7,.L_ExtInterrupt - _start + _START_OFFSET
+ bl trap_reloc
+#endif
+ li r7,.L_Alignment - _start + _START_OFFSET
+ bl trap_reloc
+ li r7,.L_ProgramCheck - _start + _START_OFFSET
+ bl trap_reloc
+ li r7,.L_FPUnavailable - _start + _START_OFFSET
+ bl trap_reloc
+ li r7,.L_Decrementer - _start + _START_OFFSET
+ bl trap_reloc
+ li r7,.L_IntervalTimer - _start + _START_OFFSET
+ li r8,_end_of_vectors - _start + _START_OFFSET
+2:
+ bl trap_reloc
+ addi r7,r7,0x100 /* next exception vector */
+ cmplw 0,r7,r8
+ blt 2b
+
+ lis r7,0x0
+ mtspr IVPR,r7
+
+ mtlr r4 /* restore link register */
+ blr
+
+
+.globl _text_base
+_text_base:
+ .long TEXT_BASE
+
+.globl unlock_ram_in_cache
+unlock_ram_in_cache:
+ /* invalidate the INIT_RAM section */
+ lis r3,(CFG_INIT_RAM_ADDR & ~(CONFIG_SYS_CACHELINE_SIZE-1))@h
+ ori r3,r3,(CFG_INIT_RAM_ADDR & ~(CONFIG_SYS_CACHELINE_SIZE-1))@l
+ mfspr r4,L1CFG0
+ andi. r4,r4,0x1ff
+ slwi r4,r4,(10 - 1 - L1_CACHE_SHIFT)
+ mtctr r4
+1: dcbi r0,r3
+ addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
+ bdnz 1b
+ sync
+
+ /* Invalidate the TLB entries for the cache */
+ lis r3,CFG_INIT_RAM_ADDR@h
+ ori r3,r3,CFG_INIT_RAM_ADDR@l
+ tlbivax 0,r3
+ addi r3,r3,0x1000
+ tlbivax 0,r3
+ addi r3,r3,0x1000
+ tlbivax 0,r3
+ addi r3,r3,0x1000
+ tlbivax 0,r3
+ isync
+ blr
+
+.globl flush_dcache
+flush_dcache:
+ mfspr r3,SPRN_L1CFG0
+
+ rlwinm r5,r3,9,3 /* Extract cache block size */
+ twlgti r5,1 /* Only 32 and 64 byte cache blocks
+ * are currently defined.
+ */
+ li r4,32
+ subfic r6,r5,2 /* r6 = log2(1KiB / cache block size) -
+ * log2(number of ways)
+ */
+ slw r5,r4,r5 /* r5 = cache block size */
+
+ rlwinm r7,r3,0,0xff /* Extract number of KiB in the cache */
+ mulli r7,r7,13 /* An 8-way cache will require 13
+ * loads per set.
+ */
+ slw r7,r7,r6
+
+ /* save off HID0 and set DCFA */
+ mfspr r8,SPRN_HID0
+ ori r9,r8,HID0_DCFA@l
+ mtspr SPRN_HID0,r9
+ isync
+
+ lis r4,0
+ mtctr r7
+
+1: lwz r3,0(r4) /* Load... */
+ add r4,r4,r5
+ bdnz 1b
+
+ msync
+ lis r4,0
+ mtctr r7
+
+1: dcbf 0,r4 /* ...and flush. */
+ add r4,r4,r5
+ bdnz 1b
+
+ /* restore HID0 */
+ mtspr SPRN_HID0,r8
+ isync
+
+ blr
+
+.globl setup_ivors
+setup_ivors:
+
+#include "fixed_ivor.S"
+ blr
+#endif /* !CONFIG_NAND_SPL */
diff --git a/arch/ppc/mach-mpc8xxx/mpc85xx/tlb.c b/arch/ppc/mach-mpc8xxx/mpc85xx/tlb.c
new file mode 100644
index 0000000..8120f7f
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/mpc85xx/tlb.c
@@ -0,0 +1,307 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/global_data.h>
+#include <asm/mmu.h>
+#include <asm/bitops.h>
+#ifdef CONFIG_ADDR_MAP
+#include <addr_map.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void invalidate_tlb(u8 tlb)
+{
+ if (tlb == 0)
+ mtspr(MMUCSR0, 0x4);
+ if (tlb == 1)
+ mtspr(MMUCSR0, 0x2);
+}
+
+void init_tlbs(void)
+{
+ int i;
+
+ for (i = 0; i < num_tlb_entries; i++) {
+ write_tlb(tlb_table[i].mas0,
+ tlb_table[i].mas1,
+ tlb_table[i].mas2,
+ tlb_table[i].mas3,
+ tlb_table[i].mas7);
+ }
+
+ return ;
+}
+
+void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn,
+ phys_addr_t *rpn)
+{
+ u32 _mas1;
+
+ mtspr(MAS0, FSL_BOOKE_MAS0(1, idx, 0));
+ asm volatile("tlbre;isync");
+ _mas1 = mfspr(MAS1);
+
+ *valid = (_mas1 & MAS1_VALID);
+ *tsize = (_mas1 >> 8) & 0xf;
+ *epn = mfspr(MAS2) & MAS2_EPN;
+ *rpn = mfspr(MAS3) & MAS3_RPN;
+#ifdef CONFIG_ENABLE_36BIT_PHYS
+ *rpn |= ((u64)mfspr(MAS7)) << 32;
+#endif
+}
+
+#ifndef CONFIG_NAND_SPL
+#if 0
+void print_tlbcam(void)
+{
+ int i;
+ unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff;
+
+ /* walk all the entries */
+ printf("TLBCAM entries\n");
+ for (i = 0; i < num_cam; i++) {
+ unsigned long epn;
+ u32 tsize, valid;
+ phys_addr_t rpn;
+
+ read_tlbcam_entry(i, &valid, &tsize, &epn, &rpn);
+ printf("entry %02d: V: %d EPN 0x%08x RPN 0x%08llx size:",
+ i, (valid == 0) ? 0 : 1, (unsigned int)epn,
+ (unsigned long long)rpn);
+ print_size(TSIZE_TO_BYTES(tsize), "\n");
+ }
+}
+#endif
+
+static inline void use_tlb_cam(u8 idx)
+{
+ int i = idx / 32;
+ int bit = idx % 32;
+
+ gd->used_tlb_cams[i] |= (1 << bit);
+}
+
+static inline void free_tlb_cam(u8 idx)
+{
+ int i = idx / 32;
+ int bit = idx % 32;
+
+ gd->used_tlb_cams[i] &= ~(1 << bit);
+}
+
+void init_used_tlb_cams(void)
+{
+ int i;
+ unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff;
+
+ for (i = 0; i < ((CONFIG_SYS_NUM_TLBCAMS+31)/32); i++)
+ gd->used_tlb_cams[i] = 0;
+
+ /* walk all the entries */
+ for (i = 0; i < num_cam; i++) {
+ mtspr(MAS0, FSL_BOOKE_MAS0(1, i, 0));
+ asm volatile("tlbre;isync");
+ if (mfspr(MAS1) & MAS1_VALID)
+ use_tlb_cam(i);
+ }
+}
+
+int find_free_tlbcam(void)
+{
+ int i;
+ u32 idx;
+
+ for (i = 0; i < ((CONFIG_SYS_NUM_TLBCAMS+31)/32); i++) {
+ idx = ffz(gd->used_tlb_cams[i]);
+
+ if (idx != 32)
+ break;
+ }
+
+ idx += i * 32;
+
+ if (idx >= CONFIG_SYS_NUM_TLBCAMS)
+ return -1;
+
+ return idx;
+}
+
+void set_tlb(u8 tlb, u32 epn, u64 rpn,
+ u8 perms, u8 wimge,
+ u8 ts, u8 esel, u8 tsize, u8 iprot)
+{
+ u32 _mas0, _mas1, _mas2, _mas3, _mas7;
+
+ if (tlb == 1)
+ use_tlb_cam(esel);
+
+ _mas0 = FSL_BOOKE_MAS0(tlb, esel, 0);
+ _mas1 = FSL_BOOKE_MAS1(1, iprot, 0, ts, tsize);
+ _mas2 = FSL_BOOKE_MAS2(epn, wimge);
+ _mas3 = FSL_BOOKE_MAS3(rpn, 0, perms);
+ _mas7 = FSL_BOOKE_MAS7(rpn);
+
+ write_tlb(_mas0, _mas1, _mas2, _mas3, _mas7);
+
+#ifdef CONFIG_ADDR_MAP
+ if ((tlb == 1) && (gd->flags & GD_FLG_RELOC))
+ addrmap_set_entry(epn, rpn, TSIZE_TO_BYTES(tsize), esel);
+#endif
+}
+
+void disable_tlb(u8 esel)
+{
+ u32 _mas0, _mas1, _mas2, _mas3, _mas7;
+
+ free_tlb_cam(esel);
+
+ _mas0 = FSL_BOOKE_MAS0(1, esel, 0);
+ _mas1 = 0;
+ _mas2 = 0;
+ _mas3 = 0;
+ _mas7 = 0;
+
+ mtspr(MAS0, _mas0);
+ mtspr(MAS1, _mas1);
+ mtspr(MAS2, _mas2);
+ mtspr(MAS3, _mas3);
+#ifdef CONFIG_ENABLE_36BIT_PHYS
+ mtspr(MAS7, _mas7);
+#endif
+ asm volatile("isync;msync;tlbwe;isync");
+
+#ifdef CONFIG_ADDR_MAP
+ if (gd->flags & GD_FLG_RELOC)
+ addrmap_set_entry(0, 0, 0, esel);
+#endif
+}
+
+static void tlbsx (const volatile unsigned *addr)
+{
+ __asm__ __volatile__ ("tlbsx 0,%0" : : "r" (addr), "m" (*addr));
+}
+
+/* return -1 if we didn't find anything */
+int find_tlb_idx(void *addr, u8 tlbsel)
+{
+ u32 _mas0, _mas1;
+
+ /* zero out Search PID, AS */
+ mtspr(MAS6, 0);
+
+ tlbsx(addr);
+
+ _mas0 = mfspr(MAS0);
+ _mas1 = mfspr(MAS1);
+
+ /* we found something, and its in the TLB we expect */
+ if ((MAS1_VALID & _mas1) &&
+ (MAS0_TLBSEL(tlbsel) == (_mas0 & MAS0_TLBSEL_MSK))) {
+ return ((_mas0 & MAS0_ESEL_MSK) >> 16);
+ }
+
+ return -1;
+}
+
+#ifdef CONFIG_ADDR_MAP
+void init_addr_map(void)
+{
+ int i;
+ unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff;
+
+ /* walk all the entries */
+ for (i = 0; i < num_cam; i++) {
+ unsigned long epn;
+ u32 tsize, valid;
+ phys_addr_t rpn;
+
+ read_tlbcam_entry(i, &valid, &tsize, &epn, &rpn);
+ if (valid & MAS1_VALID)
+ addrmap_set_entry(epn, rpn, TSIZE_TO_BYTES(tsize), i);
+ }
+
+ return ;
+}
+#endif
+
+unsigned int
+setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg)
+{
+ int i;
+ unsigned int tlb_size;
+ unsigned int wimge = 0;
+ unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
+ unsigned int max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf;
+ u64 size, memsize = (u64)memsize_in_meg << 20;
+
+#ifdef CONFIG_SYS_PPC_DDR_WIMGE
+ wimge = CONFIG_SYS_PPC_DDR_WIMGE;
+#endif
+ size = min(memsize, CONFIG_MAX_MEM_MAPPED);
+
+ /* Convert (4^max) kB to (2^max) bytes */
+ max_cam = max_cam * 2 + 10;
+
+ for (i = 0; size && i < 8; i++) {
+ int ram_tlb_index = find_free_tlbcam();
+ u32 camsize = __ilog2_u64(size) & ~1U;
+ u32 align = __ilog2(ram_tlb_address) & ~1U;
+
+ if (ram_tlb_index == -1)
+ break;
+
+ if (align == -2) align = max_cam;
+ if (camsize > align)
+ camsize = align;
+
+ if (camsize > max_cam)
+ camsize = max_cam;
+
+ tlb_size = (camsize - 10) / 2;
+
+ set_tlb(1, ram_tlb_address, p_addr,
+ MAS3_SX|MAS3_SW|MAS3_SR, wimge,
+ 0, ram_tlb_index, tlb_size, 1);
+
+ size -= 1ULL << camsize;
+ memsize -= 1ULL << camsize;
+ ram_tlb_address += 1UL << camsize;
+ p_addr += 1UL << camsize;
+ }
+
+ if (memsize)
+ printf("%lld left unmapped\n", memsize);
+// print_size(memsize, " left unmapped\n");
+ return memsize_in_meg;
+}
+
+unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg)
+{
+ return setup_ddr_tlbs_phys(CONFIG_SYS_DDR_SDRAM_BASE, memsize_in_meg);
+}
+#endif /* !CONFIG_NAND_SPL */
diff --git a/arch/ppc/mach-mpc8xxx/mpc85xx/traps.c b/arch/ppc/mach-mpc8xxx/mpc85xx/traps.c
new file mode 100644
index 0000000..9eea5b5
--- /dev/null
+++ b/arch/ppc/mach-mpc8xxx/mpc85xx/traps.c
@@ -0,0 +1,329 @@
+/*
+ * linux/arch/powerpc/kernel/traps.c
+ *
+ * Copyright 2007 Freescale Semiconductor.
+ * Copyright (C) 2003 Motorola
+ * Modified by Xianghua Xiao(x.xiao@motorola.com)
+ *
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <common.h>
+#include <command.h>
+#include <kgdb.h>
+#include <asm/processor.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+/*
+ * End of addressable memory. This may be less than the actual
+ * amount of memory on the system if we're unable to keep all
+ * the memory mapped in.
+ */
+extern ulong get_effective_memsize(void);
+#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
+
+static __inline__ void set_tsr(unsigned long val)
+{
+ asm volatile("mtspr 0x150, %0" : : "r" (val));
+}
+
+static __inline__ unsigned long get_esr(void)
+{
+ unsigned long val;
+ asm volatile("mfspr %0, 0x03e" : "=r" (val) :);
+ return val;
+}
+
+#define ESR_MCI 0x80000000
+#define ESR_PIL 0x08000000
+#define ESR_PPR 0x04000000
+#define ESR_PTR 0x02000000
+#define ESR_DST 0x00800000
+#define ESR_DIZ 0x00400000
+#define ESR_U0F 0x00008000
+
+ulong get_effective_memsize(void)
+{
+ return CONFIG_SYS_SDRAM_SIZE << 20;
+}
+
+/*
+ * Trap & Exception support
+ */
+
+void
+print_backtrace(unsigned long *sp)
+{
+ int cnt = 0;
+ unsigned long i;
+
+ printf("Call backtrace: ");
+ while (sp) {
+ if ((uint)sp > END_OF_MEM)
+ break;
+
+ i = sp[1];
+ if (cnt++ % 7 == 0)
+ printf("\n");
+ printf("%08lX ", i);
+ if (cnt > 32) break;
+ sp = (unsigned long *)*sp;
+ }
+ printf("\n");
+}
+
+void show_regs(struct pt_regs * regs)
+{
+ int i;
+
+ printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
+ regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
+ printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+ regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
+ regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
+ regs->msr&MSR_IR ? 1 : 0,
+ regs->msr&MSR_DR ? 1 : 0);
+
+ printf("\n");
+ for (i = 0; i < 32; i++) {
+ if ((i % 8) == 0)
+ {
+ printf("GPR%02d: ", i);
+ }
+
+ printf("%08lX ", regs->gpr[i]);
+ if ((i % 8) == 7)
+ {
+ printf("\n");
+ }
+ }
+}
+
+
+void
+_exception(int signr, struct pt_regs *regs)
+{
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
+}
+
+void
+CritcalInputException(struct pt_regs *regs)
+{
+ panic("Critical Input Exception");
+}
+
+int machinecheck_count = 0;
+int machinecheck_error = 0;
+void
+MachineCheckException(struct pt_regs *regs)
+{
+ unsigned long fixup;
+ unsigned int mcsr, mcsrr0, mcsrr1, mcar;
+
+ /* Probing PCI using config cycles cause this exception
+ * when a device is not present. Catch it and return to
+ * the PCI exception handler.
+ */
+ if ((fixup = search_exception_table(regs->nip)) != 0) {
+ regs->nip = fixup;
+ return;
+ }
+
+ mcsrr0 = mfspr(SPRN_MCSRR0);
+ mcsrr1 = mfspr(SPRN_MCSRR1);
+ mcsr = mfspr(SPRN_MCSR);
+ mcar = mfspr(SPRN_MCAR);
+
+ machinecheck_count++;
+ machinecheck_error=1;
+
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ printf("Machine check in kernel mode.\n");
+ printf("Caused by (from mcsr): ");
+ printf("mcsr = 0x%08x\n", mcsr);
+ if (mcsr & 0x80000000)
+ printf("Machine check input pin\n");
+ if (mcsr & 0x40000000)
+ printf("Instruction cache parity error\n");
+ if (mcsr & 0x20000000)
+ printf("Data cache push parity error\n");
+ if (mcsr & 0x10000000)
+ printf("Data cache parity error\n");
+ if (mcsr & 0x00000080)
+ printf("Bus instruction address error\n");
+ if (mcsr & 0x00000040)
+ printf("Bus Read address error\n");
+ if (mcsr & 0x00000020)
+ printf("Bus Write address error\n");
+ if (mcsr & 0x00000010)
+ printf("Bus Instruction data bus error\n");
+ if (mcsr & 0x00000008)
+ printf("Bus Read data bus error\n");
+ if (mcsr & 0x00000004)
+ printf("Bus Write bus error\n");
+ if (mcsr & 0x00000002)
+ printf("Bus Instruction parity error\n");
+ if (mcsr & 0x00000001)
+ printf("Bus Read parity error\n");
+
+ show_regs(regs);
+ printf("MCSR=0x%08x \tMCSRR0=0x%08x \nMCSRR1=0x%08x \tMCAR=0x%08x\n",
+ mcsr, mcsrr0, mcsrr1, mcar);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ if (machinecheck_count > 10) {
+ panic("machine check count too high\n");
+ }
+
+ if (machinecheck_count > 1) {
+ regs->nip += 4; /* skip offending instruction */
+ printf("Skipping current instr, Returning to 0x%08lx\n",
+ regs->nip);
+ } else {
+ printf("Returning back to 0x%08lx\n",regs->nip);
+ }
+}
+
+void
+AlignmentException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Alignment Exception");
+}
+
+void
+ProgramCheckException(struct pt_regs *regs)
+{
+ long esr_val;
+
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ show_regs(regs);
+
+ esr_val = get_esr();
+ if( esr_val & ESR_PIL )
+ printf( "** Illegal Instruction **\n" );
+ else if( esr_val & ESR_PPR )
+ printf( "** Privileged Instruction **\n" );
+ else if( esr_val & ESR_PTR )
+ printf( "** Trap Instruction **\n" );
+
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Program Check Exception");
+}
+
+void
+PITException(struct pt_regs *regs)
+{
+ /*
+ * Reset PIT interrupt
+ */
+ set_tsr(0x0c000000);
+
+ /*
+ * Call timer_interrupt routine in interrupts.c
+ */
+#ifdef CONFIG_USE_IRQ
+ timer_interrupt(NULL);
+#endif
+}
+
+
+void
+UnknownException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+ regs->nip, regs->msr, regs->trap);
+ _exception(0, regs);
+}
+
+void
+ExtIntException(struct pt_regs *regs)
+{
+ volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
+
+ uint vect;
+
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ printf("External Interrupt Exception at PC: %lx, SR: %lx, vector=%lx",
+ regs->nip, regs->msr, regs->trap);
+ vect = pic->iack0;
+ printf(" irq IACK0@%05x=%d\n",(int)&pic->iack0,vect);
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+}
+
+void
+DebugException(struct pt_regs *regs)
+{
+ printf("Debugger trap at @ %lx\n", regs->nip );
+ show_regs(regs);
+#if defined(CONFIG_CMD_BEDBUG)
+ do_bedbug_breakpoint( regs );
+#endif
+}
+
+/* Probe an address by reading. If not present, return -1, otherwise
+ * return 0.
+ */
+int
+addr_probe(uint *addr)
+{
+ return 0;
+}
--
1.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-01-24 12:34 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-24 12:33 [PATCH 0/9] MPC8xxx support Renaud Barbier
2012-01-24 12:33 ` [PATCH 1/9] Preparation stage to support multiple PPC architectures Renaud Barbier
2012-01-25 17:33 ` Sascha Hauer
2012-01-24 12:33 ` [PATCH 2/9] Define clock source shift and mask Renaud Barbier
2012-01-25 17:36 ` Sascha Hauer
2012-01-24 12:33 ` Renaud Barbier [this message]
2012-01-24 12:33 ` [PATCH 4/9] Header files added to support the mpc8xxx architecture Renaud Barbier
2012-01-24 12:33 ` [PATCH 5/9] Update to existing header files Renaud Barbier
2012-01-24 12:34 ` [PATCH 6/9] Add file and compilation of strmhz Renaud Barbier
2012-01-24 12:34 ` [PATCH 7/9] Add-ons to the PPC library to support the mpc8xxx Renaud Barbier
2012-01-24 12:34 ` [PATCH 8/9] Update (ppc) Makefile and Kconfig Renaud Barbier
2012-01-24 12:34 ` [PATCH 9/9] P1_P2 platform support code and configuratin file for the P2020RDB Renaud Barbier
2012-01-25 19:33 ` [PATCH 0/9] MPC8xxx support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1327408443-3519-4-git-send-email-renaud.barbier@ge.com \
--to=renaud.barbier@ge.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox