From: "Eric Bénard" <eric@eukrea.com>
To: barebox@lists.infradead.org
Subject: [PATCH 1/7] add i2c clock support
Date: Tue, 21 Feb 2012 01:27:33 +0100 [thread overview]
Message-ID: <1329784059-6006-1-git-send-email-eric@eukrea.com> (raw)
Signed-off-by: Eric Bénard <eric@eukrea.com>
---
arch/arm/mach-imx/speed-imx53.c | 26 ++++++++++++++++++++++++++
1 files changed, 26 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-imx/speed-imx53.c b/arch/arm/mach-imx/speed-imx53.c
index 0d6ac24..a2385fa 100644
--- a/arch/arm/mach-imx/speed-imx53.c
+++ b/arch/arm/mach-imx/speed-imx53.c
@@ -169,6 +169,31 @@ unsigned long imx_get_fecclk(void)
return imx_get_ipgclk();
}
+static unsigned long imx_get_ipg_perclk(void)
+{
+ u32 reg;
+
+ reg = ccm_readl(MX5_CCM_CBCDR);
+ if (!(reg & MX5_CCM_CBCDR_PERIPH_CLK_SEL))
+ return pll2_sw_get_rate();
+ reg = ccm_readl(MX5_CCM_CBCMR);
+ switch ((reg & MX5_CCM_CBCMR_PERIPH_CLK_SEL_MASK) >>
+ MX5_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET) {
+ case 0:
+ return pll1_main_get_rate();
+ case 1:
+ return pll3_sw_get_rate();
+ /* case 2:
+ TODO : LP_APM */
+ }
+ return 0;
+}
+
+unsigned long imx_get_i2cclk(void)
+{
+ return imx_get_ipg_perclk();
+}
+
unsigned long imx_get_mmcclk(void)
{
u32 reg, prediv, podf, rate;
@@ -201,4 +226,5 @@ void imx_dump_clocks(void)
printf("ipg: %ld\n", imx_get_ipgclk());
printf("fec: %ld\n", imx_get_fecclk());
printf("gpt: %ld\n", imx_get_gptclk());
+ printf("i2c: %ld\n", imx_get_i2cclk());
}
--
1.7.7.6
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2012-02-21 0:27 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-21 0:27 Eric Bénard [this message]
2012-02-21 0:27 ` [PATCH 2/7] mfd: add mc34708 driver Eric Bénard
2012-02-21 3:48 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-21 7:03 ` Eric Bénard
2012-02-21 13:03 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-21 13:22 ` Eric Bénard
2012-02-21 14:10 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-21 15:35 ` Eric Bénard
2012-02-21 15:38 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-21 20:45 ` Sascha Hauer
2012-02-21 21:09 ` Marc Reilly
2012-02-21 0:27 ` [PATCH 3/7] i.MX53: add silicn revision functions Eric Bénard
2012-02-22 7:33 ` Sascha Hauer
2012-02-27 8:20 ` [PATCH v2 1/7] add i2c clock support Eric Bénard
2012-02-27 8:20 ` [PATCH v2 2/7] mfd: add mc34708 driver Eric Bénard
2012-02-27 8:20 ` [PATCH v2 3/7] i.MX53: add silicon revision functions Eric Bénard
2012-02-27 8:20 ` [PATCH v2 4/7] i.MX53: enable pull up on I2C0 pins Eric Bénard
2012-02-27 8:20 ` [PATCH v2 5/7] mx53-loco: add i2c support Eric Bénard
2012-02-27 8:20 ` [PATCH v2 6/7] mx53-loco: add board revision support Eric Bénard
2012-02-27 15:40 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-27 18:58 ` Sascha Hauer
2012-02-27 8:20 ` [PATCH v2 7/7] mx53-loco: update defconfig Eric Bénard
2012-02-27 18:59 ` [PATCH v2 1/7] add i2c clock support Sascha Hauer
2012-02-21 0:27 ` [PATCH 4/7] i.MX53: enable pull up on I2C0 pins Eric Bénard
2012-02-21 0:27 ` [PATCH 5/7] mx53-loco: add i2c support Eric Bénard
2012-02-21 0:27 ` [PATCH 6/7] mx53-loco: add board revision support Eric Bénard
2012-02-21 3:50 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-21 0:27 ` [PATCH 7/7] mx53-loco: update defconfig Eric Bénard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1329784059-6006-1-git-send-email-eric@eukrea.com \
--to=eric@eukrea.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox