From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org, Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice VILCHEZ <patrice.vilchez@atmel.com>
Subject: [PATCH 05/14] at91sam9263ek: update defconfig
Date: Mon, 12 Mar 2012 12:17:53 +0100 [thread overview]
Message-ID: <1331551082-7730-5-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1331551082-7730-1-git-send-email-plagnioj@jcrosoft.com>
- set max size to 256KiB
- enable MMU
- bootm: enable oftree and initrd support
- nand: drop non used hw ecc
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/configs/at91sam9263ek_defconfig | 17 +++++++++++++++--
1 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index 3353601..f59eab9 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -1,5 +1,9 @@
CONFIG_ARCH_AT91SAM9263=y
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_MMU=y
+CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x40000
+CONFIG_EXPERIMENTAL=y
+CONFIG_MALLOC_TLSF=y
CONFIG_PROMPT="9263-EK:"
CONFIG_LONGHELP=y
CONFIG_GLOB=y
@@ -20,11 +24,15 @@ CONFIG_CMD_LOADB=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MTEST=y
CONFIG_CMD_FLASH=y
-CONFIG_CMD_BOOTM_ZLIB=y
-CONFIG_CMD_BOOTM_BZLIB=y
CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_BOOTM_OFTREE=y
+CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
+CONFIG_CMD_UIMAGE=y
+# CONFIG_CMD_BOOTU is not set
CONFIG_CMD_RESET=y
CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_GPIO=y
@@ -38,8 +46,13 @@ CONFIG_NET_TFTP=y
CONFIG_DRIVER_NET_MACB=y
# CONFIG_SPI is not set
CONFIG_DRIVER_CFI=y
+# CONFIG_DRIVER_CFI_INTEL is not set
CONFIG_MTD=y
+# CONFIG_MTD_OOB_DEVICE is not set
CONFIG_NAND=y
+# CONFIG_NAND_ECC_HW is not set
+# CONFIG_NAND_ECC_HW_SYNDROME is not set
+# CONFIG_NAND_ECC_HW_NONE is not set
CONFIG_NAND_ATMEL=y
CONFIG_UBI=y
CONFIG_USB_GADGET=y
--
1.7.7
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-03-12 11:29 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-12 11:17 [PATCH 01/14] macb: fix mmu support Jean-Christophe PLAGNIOL-VILLARD
2012-03-12 11:17 ` [PATCH 02/14] at91sam9263ek: add runtime nor detection Jean-Christophe PLAGNIOL-VILLARD
2012-03-12 11:17 ` [PATCH 03/14] at91sam9263ek: add leds support Jean-Christophe PLAGNIOL-VILLARD
2012-03-12 11:17 ` [PATCH 04/14] at91sam9263ek: add dfu and usb serial support Jean-Christophe PLAGNIOL-VILLARD
2012-03-12 11:17 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-03-12 11:17 ` [PATCH 06/14] at91sam9261ek/9g10ek: update partition layout Jean-Christophe PLAGNIOL-VILLARD
2012-03-12 11:17 ` [PATCH 07/14] at91sam9261ek/9g10ek: add leds support Jean-Christophe PLAGNIOL-VILLARD
2012-03-12 11:17 ` [PATCH 08/14] at91sam9261ek/9g10ek: add dfu and usb serial support Jean-Christophe PLAGNIOL-VILLARD
2012-03-12 11:17 ` [PATCH 09/14] at91sam9261ek/9g10ek: add gpio Keyboard support Jean-Christophe PLAGNIOL-VILLARD
2012-03-12 11:17 ` [PATCH 10/14] at91sam9261ek/9g10ek: update board supprt Jean-Christophe PLAGNIOL-VILLARD
2012-03-12 11:17 ` [PATCH 11/14] at91sam9m10g45ek: update partition layout Jean-Christophe PLAGNIOL-VILLARD
2012-03-12 11:18 ` [PATCH 12/14] at91sam9m10g45ek: add leds support Jean-Christophe PLAGNIOL-VILLARD
2012-03-12 11:18 ` [PATCH 13/14] at91sam9m10g45ek: update defconfig Jean-Christophe PLAGNIOL-VILLARD
2012-03-12 11:18 ` [PATCH 14/14] at91sam9260ek/9g20ek: " Jean-Christophe PLAGNIOL-VILLARD
2012-03-13 13:37 ` [PATCH 01/14] macb: fix mmu support Sascha Hauer
2012-03-13 17:13 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1331551082-7730-5-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
--cc=nicolas.ferre@atmel.com \
--cc=patrice.vilchez@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox