From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 1/1] at91: set dhcp vendor id on Atmel Reference board
Date: Tue, 13 Mar 2012 18:43:15 +0100 [thread overview]
Message-ID: <1331660595-9040-1-git-send-email-plagnioj@jcrosoft.com> (raw)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/boards/at91sam9260ek/env/config | 7 +++++++
arch/arm/boards/at91sam9261ek/env/config | 7 +++++++
arch/arm/boards/at91sam9263ek/env/config | 1 +
arch/arm/boards/at91sam9m10g45ek/env/config | 1 +
arch/arm/boards/usb-a926x/env/config | 1 +
5 files changed, 17 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boards/at91sam9260ek/env/config b/arch/arm/boards/at91sam9260ek/env/config
index 8db18ef..74e793c 100644
--- a/arch/arm/boards/at91sam9260ek/env/config
+++ b/arch/arm/boards/at91sam9260ek/env/config
@@ -4,6 +4,13 @@
# use 'none' if you want to skip kernel ip autoconfiguration
ip=dhcp
+if [ x$armlinux_architecture = x1099 ]
+then
+ dhcp_vendor_id=barebox-at91sam9260ek
+else
+ dhcp_vendor_id=barebox-at91sam9g20ek
+fi
+
# or set your networking parameters here
#eth0.ipaddr=a.b.c.d
#eth0.netmask=a.b.c.d
diff --git a/arch/arm/boards/at91sam9261ek/env/config b/arch/arm/boards/at91sam9261ek/env/config
index de13010..fca5184 100644
--- a/arch/arm/boards/at91sam9261ek/env/config
+++ b/arch/arm/boards/at91sam9261ek/env/config
@@ -4,6 +4,13 @@
# use 'none' if you want to skip kernel ip autoconfiguration
ip=dhcp
+if [ x$armlinux_architecture = x848 ]
+then
+ dhcp_vendor_id=barebox-at91sam9261ek
+else
+ dhcp_vendor_id=barebox-at91sam9g10ek
+fi
+
# or set your networking parameters here
#eth0.ipaddr=a.b.c.d
#eth0.netmask=a.b.c.d
diff --git a/arch/arm/boards/at91sam9263ek/env/config b/arch/arm/boards/at91sam9263ek/env/config
index 388a939..95eb8af 100644
--- a/arch/arm/boards/at91sam9263ek/env/config
+++ b/arch/arm/boards/at91sam9263ek/env/config
@@ -3,6 +3,7 @@
# use 'dhcp' to do dhcp in barebox and in kernel
# use 'none' if you want to skip kernel ip autoconfiguration
ip=dhcp
+dhcp_vendor_id=barebox-at91sam9263ek
# or set your networking parameters here
#eth0.ipaddr=a.b.c.d
diff --git a/arch/arm/boards/at91sam9m10g45ek/env/config b/arch/arm/boards/at91sam9m10g45ek/env/config
index 9be6331..6b96599 100644
--- a/arch/arm/boards/at91sam9m10g45ek/env/config
+++ b/arch/arm/boards/at91sam9m10g45ek/env/config
@@ -3,6 +3,7 @@
# use 'dhcp' to do dhcp in barebox and in kernel
# use 'none' if you want to skip kernel ip autoconfiguration
ip=dhcp
+dhcp_vendor_id=barebox-at91sam9m10g45ek
# or set your networking parameters here
#eth0.ipaddr=a.b.c.d
diff --git a/arch/arm/boards/usb-a926x/env/config b/arch/arm/boards/usb-a926x/env/config
index 96a4524..ff097a0 100644
--- a/arch/arm/boards/usb-a926x/env/config
+++ b/arch/arm/boards/usb-a926x/env/config
@@ -3,6 +3,7 @@
# use 'dhcp' to do dhcp in barebox and in kernel
# use 'none' if you want to skip kernel ip autoconfiguration
ip=dhcp
+dhcp_vendor_id=barebox-at91sam9x5ek
# or set your networking parameters here
#eth0.ipaddr=a.b.c.d
--
1.7.7
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
reply other threads:[~2012-03-13 17:55 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1331660595-9040-1-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox