From: Asen Chavdarov Dimov <dimov@ronetix.at>
To: barebox@lists.infradead.org
Subject: [PATCH v3 3/4] pm9g45: enable MCI0
Date: Wed, 21 Mar 2012 18:27:25 +0200 [thread overview]
Message-ID: <1332347246-8777-3-git-send-email-dimov@ronetix.at> (raw)
In-Reply-To: <1332347246-8777-1-git-send-email-dimov@ronetix.at>
FIXME: part of or no data is written. File copy ends
with message: "atmel_mci@atmel_mci0: command/data timeout"
Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>
---
since v1:
add_device_mci renamed to pm9g45_add_device_mci
since v2:
- used savedefconfig to minimize the config file
---
arch/arm/boards/pm9g45/init.c | 16 ++++++++++++++++
arch/arm/configs/pm9g45_defconfig | 7 +++++--
2 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boards/pm9g45/init.c b/arch/arm/boards/pm9g45/init.c
index 567bad4..174dd75 100644
--- a/arch/arm/boards/pm9g45/init.c
+++ b/arch/arm/boards/pm9g45/init.c
@@ -77,6 +77,21 @@ static void pm_add_device_nand(void)
at91_add_device_nand(&nand_pdata);
}
+#if defined(CONFIG_MCI_ATMEL)
+static struct atmel_mci_platform_data __initdata mci_data = {
+ .bus_width = 4,
+ .wp_pin = 0,
+ .detect_pin = AT91_PIN_PD6,
+};
+
+static void pm9g45_add_device_mci(void)
+{
+ at91_add_device_mci(0, &mci_data);
+}
+#else
+static void pm9g45_add_device_mci(void) {}
+#endif
+
static struct at91_ether_platform_data macb_pdata = {
.flags = AT91SAM_ETHER_RMII,
.phy_addr = 0,
@@ -104,6 +119,7 @@ mem_initcall(pm9g45_mem_init);
static int pm9g45_devices_init(void)
{
pm_add_device_nand();
+ pm9g45_add_device_mci();
pm9g45_phy_init();
at91_add_device_eth(&macb_pdata);
diff --git a/arch/arm/configs/pm9g45_defconfig b/arch/arm/configs/pm9g45_defconfig
index d199abd..8106202 100644
--- a/arch/arm/configs/pm9g45_defconfig
+++ b/arch/arm/configs/pm9g45_defconfig
@@ -4,8 +4,6 @@ CONFIG_AEABI=y
CONFIG_LONGHELP=y
CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
-CONFIG_PARTITION=y
-CONFIG_PARTITION_DISK=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/pm9g45/env"
CONFIG_POLLER=y
@@ -35,4 +33,9 @@ CONFIG_MTD=y
CONFIG_NAND=y
CONFIG_NAND_ATMEL=y
CONFIG_UBI=y
+CONFIG_MCI=y
+CONFIG_MCI_ATMEL=y
CONFIG_EEPROM_AT25=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
--
1.7.4.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-03-21 16:26 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-01 16:21 [PATCH 1/3] pm9g45: fix Ethernet Asen Chavdarov Dimov
2012-03-01 16:21 ` [PATCH 2/3] pm9g45: enable MCI0 Asen Chavdarov Dimov
2012-03-01 17:10 ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-01 16:21 ` [PATCH 3/3] pm9g45: enable USB OHCI host and USB mass storage Asen Chavdarov Dimov
2012-03-01 17:12 ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-02 15:20 ` RONETIX - Asen Dimov
2012-03-02 17:13 ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-01 17:08 ` [PATCH 1/3] pm9g45: fix Ethernet Jean-Christophe PLAGNIOL-VILLARD
2012-03-02 16:55 ` [PATCH v2 1/4] pm9g45: boot from NAND Asen Chavdarov Dimov
2012-03-02 16:55 ` [PATCH v2 2/4] pm9g45: fix Ethernet Asen Chavdarov Dimov
2012-03-02 17:19 ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-02 16:55 ` [PATCH v2 3/4] pm9g45: enable MCI0 Asen Chavdarov Dimov
2012-03-02 17:21 ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-02 16:55 ` [PATCH v2 4/4] pm9g45: enable USB OHCI host and USB mass storage Asen Chavdarov Dimov
2012-03-02 17:22 ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-02 17:18 ` [PATCH v2 1/4] pm9g45: boot from NAND Jean-Christophe PLAGNIOL-VILLARD
2012-03-08 11:37 ` RONETIX - Asen Dimov
2012-03-08 13:05 ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-21 16:43 ` RONETIX - Asen Dimov
2012-03-21 16:27 ` [PATCH v3 " Asen Chavdarov Dimov
2012-03-21 16:27 ` [PATCH v3 2/4] pm9g45: fix Ethernet Asen Chavdarov Dimov
2012-03-21 16:27 ` Asen Chavdarov Dimov [this message]
2012-03-22 20:17 ` [PATCH v3 3/4] pm9g45: enable MCI0 Sascha Hauer
2012-03-23 12:55 ` RONETIX - Asen Dimov
2012-03-23 15:18 ` Sascha Hauer
2012-03-21 16:27 ` [PATCH v3 4/4] pm9g45: enable USB OHCI host and USB mass storage Asen Chavdarov Dimov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1332347246-8777-3-git-send-email-dimov@ronetix.at \
--to=dimov@ronetix.at \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox