From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org, Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice VILCHEZ <patrice.vilchez@atmel.com>
Subject: [PATCH 4/6] at91: set ip mode to dhcp-barebox
Date: Fri, 30 Mar 2012 06:47:54 +0200 [thread overview]
Message-ID: <1333082876-22403-4-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <20120330044138.GY444@game.jcrosoft.org>
As the mainline kernel does not enable the bootp support by default
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/boards/at91rm9200ek/env/config | 2 +-
arch/arm/boards/at91sam9260ek/env/config | 2 +-
arch/arm/boards/at91sam9261ek/env/config | 2 +-
arch/arm/boards/at91sam9263ek/env/config | 2 +-
arch/arm/boards/at91sam9m10g45ek/env/config | 2 +-
arch/arm/boards/tny-a926x/env/config | 2 +-
arch/arm/boards/usb-a926x/env/config | 2 +-
7 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boards/at91rm9200ek/env/config b/arch/arm/boards/at91rm9200ek/env/config
index 12655c2..d1d9e8e 100644
--- a/arch/arm/boards/at91rm9200ek/env/config
+++ b/arch/arm/boards/at91rm9200ek/env/config
@@ -2,7 +2,7 @@
# use 'dhcp' to do dhcp in barebox and in kernel
# use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
+ip=dhcp-barebox
# or set your networking parameters here
#eth0.ipaddr=a.b.c.d
diff --git a/arch/arm/boards/at91sam9260ek/env/config b/arch/arm/boards/at91sam9260ek/env/config
index 74e793c..2c0f075 100644
--- a/arch/arm/boards/at91sam9260ek/env/config
+++ b/arch/arm/boards/at91sam9260ek/env/config
@@ -2,7 +2,7 @@
# use 'dhcp' to do dhcp in barebox and in kernel
# use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
+ip=dhcp-barebox
if [ x$armlinux_architecture = x1099 ]
then
diff --git a/arch/arm/boards/at91sam9261ek/env/config b/arch/arm/boards/at91sam9261ek/env/config
index fca5184..be4d37c 100644
--- a/arch/arm/boards/at91sam9261ek/env/config
+++ b/arch/arm/boards/at91sam9261ek/env/config
@@ -2,7 +2,7 @@
# use 'dhcp' to do dhcp in barebox and in kernel
# use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
+ip=dhcp-barebox
if [ x$armlinux_architecture = x848 ]
then
diff --git a/arch/arm/boards/at91sam9263ek/env/config b/arch/arm/boards/at91sam9263ek/env/config
index 95eb8af..93eeb1e 100644
--- a/arch/arm/boards/at91sam9263ek/env/config
+++ b/arch/arm/boards/at91sam9263ek/env/config
@@ -2,7 +2,7 @@
# use 'dhcp' to do dhcp in barebox and in kernel
# use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
+ip=dhcp-barebox
dhcp_vendor_id=barebox-at91sam9263ek
# or set your networking parameters here
diff --git a/arch/arm/boards/at91sam9m10g45ek/env/config b/arch/arm/boards/at91sam9m10g45ek/env/config
index 6b96599..d115132 100644
--- a/arch/arm/boards/at91sam9m10g45ek/env/config
+++ b/arch/arm/boards/at91sam9m10g45ek/env/config
@@ -2,7 +2,7 @@
# use 'dhcp' to do dhcp in barebox and in kernel
# use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
+ip=dhcp-barebox
dhcp_vendor_id=barebox-at91sam9m10g45ek
# or set your networking parameters here
diff --git a/arch/arm/boards/tny-a926x/env/config b/arch/arm/boards/tny-a926x/env/config
index 0ca38d5..b5215dc 100644
--- a/arch/arm/boards/tny-a926x/env/config
+++ b/arch/arm/boards/tny-a926x/env/config
@@ -2,7 +2,7 @@
# use 'dhcp' to do dhcp in barebox and in kernel
# use 'none' if you want to skip kernel ip autoconfiguration
-ip=none
+ip=dhcp-barebox
# or set your networking parameters here
#eth0.ipaddr=a.b.c.d
diff --git a/arch/arm/boards/usb-a926x/env/config b/arch/arm/boards/usb-a926x/env/config
index ff097a0..1f72803 100644
--- a/arch/arm/boards/usb-a926x/env/config
+++ b/arch/arm/boards/usb-a926x/env/config
@@ -2,7 +2,7 @@
# use 'dhcp' to do dhcp in barebox and in kernel
# use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
+ip=dhcp-barebox
dhcp_vendor_id=barebox-at91sam9x5ek
# or set your networking parameters here
--
1.7.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-03-30 5:03 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-30 4:41 [PATCH 0/6 for this release] Jean-Christophe PLAGNIOL-VILLARD
2012-03-30 4:47 ` [PATCH 1/6] cfi_flash: fix missing resource update when probing the cfi size Jean-Christophe PLAGNIOL-VILLARD
2012-04-02 8:17 ` Sascha Hauer
2012-03-30 4:47 ` [PATCH 2/6] net: at91_ether re-implement against new at91rm9200 api Jean-Christophe PLAGNIOL-VILLARD
2012-03-30 4:47 ` [PATCH 3/6] at91rm9200ek: enable at91_ether and net support Jean-Christophe PLAGNIOL-VILLARD
2012-03-30 4:47 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-03-30 4:47 ` [PATCH 5/6] at91rm9200ek: update config for network Jean-Christophe PLAGNIOL-VILLARD
2012-03-30 4:47 ` [PATCH 6/6] at91rm9200ek: adjust kernel partition to be able to flash mainline kernel Jean-Christophe PLAGNIOL-VILLARD
2012-04-02 8:26 ` [PATCH 0/6 for this release] Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1333082876-22403-4-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
--cc=nicolas.ferre@atmel.com \
--cc=patrice.vilchez@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox