From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1SSDrP-0002UP-Ph for barebox@lists.infradead.org; Wed, 09 May 2012 20:51:48 +0000 From: Wolfram Sang Date: Wed, 9 May 2012 22:51:39 +0200 Message-Id: <1336596699-19841-1-git-send-email-w.sang@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH] arm: mxs: get MAC from OCOTP for MX28EVK To: barebox@lists.infradead.org Signed-off-by: Wolfram Sang --- arch/arm/boards/freescale-mx28-evk/mx28-evk.c | 25 +++++++++++++++++++++++-- arch/arm/mach-mxs/Kconfig | 1 + 2 files changed, 24 insertions(+), 2 deletions(-) diff --git a/arch/arm/boards/freescale-mx28-evk/mx28-evk.c b/arch/arm/boards/freescale-mx28-evk/mx28-evk.c index 9168ed8..f0b256b 100644 --- a/arch/arm/boards/freescale-mx28-evk/mx28-evk.c +++ b/arch/arm/boards/freescale-mx28-evk/mx28-evk.c @@ -22,17 +22,18 @@ #include #include #include +#include #include #include #include #include +#include +#include #include #include -#include - #include #define MX28EVK_FEC_PHY_RESET_GPIO 141 @@ -118,6 +119,22 @@ static struct mxs_mci_platform_data mci_pdata = { }; /* fec */ +void mx28_evk_get_ethaddr(void) +{ + u8 mac[6] = { 0x00, 0x04, 0x9f, 0x00, 0x00, 0x00 }; + u8 tmp; + int ret; + + ret = mxs_ocotp_read(mac + 3, 3, 0); + if (ret != 3) + return; + + tmp = mac[5]; + mac[5] = mac[3]; + mac[3] = tmp; + eth_register_ethaddr(0, mac); +} + static void __init mx28_evk_fec_reset(void) { mdelay(1); @@ -208,6 +225,10 @@ static int mx28_evk_devices_init(void) add_generic_device("stmfb", 0, NULL, IMX_FB_BASE, 4096, IORESOURCE_MEM, &mx28_evk_fb_pdata); + add_generic_device("ocotp", 0, NULL, IMX_OCOTP_BASE, 0, + IORESOURCE_MEM, NULL); + mx28_evk_get_ethaddr(); /* must be after registering ocotp */ + imx_enable_enetclk(); mx28_evk_fec_reset(); add_generic_device("fec_imx", 0, NULL, IMX_FEC0_BASE, 0, diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index f646e0b..9ce7c7a 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -61,6 +61,7 @@ config MACH_TX28 config MACH_MX28EVK bool "mx28-evk" + select MXS_OCOTP help Say Y here if you are using the Freescale i.MX28-EVK board -- 1.7.10 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox