mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Subject: [PATCH] fix typo funtion -> function
Date: Sun, 13 May 2012 20:36:50 +0400	[thread overview]
Message-ID: <1336927010-13872-1-git-send-email-antonynpavlov@gmail.com> (raw)

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
 arch/arm/cpu/start.c                   |    2 +-
 arch/arm/mach-omap/devices-gpmc-nand.c |    2 +-
 drivers/mtd/nand/nand_imx.c            |    2 +-
 include/linux/mtd/nand.h               |    2 +-
 scripts/mod/modpost.c                  |    2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/cpu/start.c b/arch/arm/cpu/start.c
index ede8fd1..c7462f6 100644
--- a/arch/arm/cpu/start.c
+++ b/arch/arm/cpu/start.c
@@ -108,7 +108,7 @@ void __naked __bare_init reset(void)
 
 /*
  * Board code can jump here by either returning from board_init_lowlevel
- * or by calling this funtion directly.
+ * or by calling this function directly.
  */
 void __naked __section(.text_ll_return) board_init_lowlevel_return(void)
 {
diff --git a/arch/arm/mach-omap/devices-gpmc-nand.c b/arch/arm/mach-omap/devices-gpmc-nand.c
index 0fc32f1..cf87b57 100644
--- a/arch/arm/mach-omap/devices-gpmc-nand.c
+++ b/arch/arm/mach-omap/devices-gpmc-nand.c
@@ -49,7 +49,7 @@ static struct gpmc_nand_platform_data nand_plat = {
 /**
  * @brief gpmc_generic_nand_devices_init - init generic nand device
  *
- * @return success/fail based on device funtion
+ * @return success/fail based on device function
  */
 int gpmc_generic_nand_devices_init(int cs, int width,
 		enum gpmc_ecc_mode eccmode, struct gpmc_config *nand_cfg)
diff --git a/drivers/mtd/nand/nand_imx.c b/drivers/mtd/nand/nand_imx.c
index 85cfbed..e75ffbc 100644
--- a/drivers/mtd/nand/nand_imx.c
+++ b/drivers/mtd/nand/nand_imx.c
@@ -1135,7 +1135,7 @@ static int __init imxnd_probe(struct device_d *dev)
 
 	this->ecc.layout = oob_smallpage;
 
-	/* NAND bus width determines access funtions used by upper layer */
+	/* NAND bus width determines access functions used by upper layer */
 	if (pdata->width == 2) {
 		this->options |= NAND_BUSWIDTH_16;
 		this->ecc.layout = &nandv1_hw_eccoob_smallpage;
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 8e20876..2a1c4ff 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -313,7 +313,7 @@ struct nand_buffers {
  * @select_chip:	[REPLACEABLE] select chip nr
  * @block_bad:		[REPLACEABLE] check, if the block is bad
  * @block_markbad:	[REPLACEABLE] mark the block bad
- * @cmd_ctrl:		[BOARDSPECIFIC] hardwarespecific funtion for controlling
+ * @cmd_ctrl:		[BOARDSPECIFIC] hardwarespecific function for controlling
  *			ALE/CLE/nCE. Also used to write command and address
  * @dev_ready:		[BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line
  *			If set to NULL no access to ready/busy is available and the ready/busy information
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index e994486..795ee8d 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -604,7 +604,7 @@ static int strrcmp(const char *s, const char *sub)
  * Whitelist to allow certain references to pass with no warning.
  *
  * Pattern 0:
- *   Do not warn if funtion/data are marked with __init_refok/__initdata_refok.
+ *   Do not warn if function/data are marked with __init_refok/__initdata_refok.
  *   The pattern is identified by:
  *   fromsec = .text.init.refok | .data.init.refok
  *
-- 
1.7.10


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2012-05-13 16:37 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-13 16:36 Antony Pavlov [this message]
2012-05-13 20:01 ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1336927010-13872-1-git-send-email-antonynpavlov@gmail.com \
    --to=antonynpavlov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox