mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 1/2] add qsort support
Date: Mon, 14 May 2012 20:20:59 +0200	[thread overview]
Message-ID: <1337019660-12096-2-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1337019660-12096-1-git-send-email-s.hauer@pengutronix.de>

This is based on U-Boot code which in turn is based on uclibc
code.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 include/qsort.h |    7 +++++
 lib/Kconfig     |    3 +++
 lib/Makefile    |    1 +
 lib/qsort.c     |   79 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 90 insertions(+)
 create mode 100644 include/qsort.h
 create mode 100644 lib/qsort.c

diff --git a/include/qsort.h b/include/qsort.h
new file mode 100644
index 0000000..bbb2359
--- /dev/null
+++ b/include/qsort.h
@@ -0,0 +1,7 @@
+#ifndef __QSORT_H
+#define __QSORT_H
+
+void qsort(void  *base, size_t nel, size_t width,
+	   int (*comp)(const void *, const void *));
+
+#endif /* __QSORT_H */
diff --git a/lib/Kconfig b/lib/Kconfig
index f886e6e..3bcde5c 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -35,4 +35,7 @@ config BCH
 config BITREV
        bool
 
+config QSORT
+	bool
+
 endmenu
diff --git a/lib/Makefile b/lib/Makefile
index 01a01b5..4e6b1ee 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -33,3 +33,4 @@ obj-$(CONFIG_FDT)	+= fdt/
 obj-$(CONFIG_UNCOMPRESS)	+= uncompress.o
 obj-$(CONFIG_BCH)	+= bch.o
 obj-$(CONFIG_BITREV)	+= bitrev.o
+obj-$(CONFIG_QSORT)	+= qsort.o
diff --git a/lib/qsort.c b/lib/qsort.c
new file mode 100644
index 0000000..f648714
--- /dev/null
+++ b/lib/qsort.c
@@ -0,0 +1,79 @@
+/*
+ * Code adapted from uClibc-0.9.30.3
+ *
+ * It is therefore covered by the GNU LESSER GENERAL PUBLIC LICENSE
+ * Version 2.1, February 1999
+ *
+ * Wolfgang Denk <wd@denx.de>
+ */
+
+/* This code is derived from a public domain shell sort routine by
+ * Ray Gardner and found in Bob Stout's snippets collection.  The
+ * original code is included below in an #if 0/#endif block.
+ *
+ * I modified it to avoid the possibility of overflow in the wgap
+ * calculation, as well as to reduce the generated code size with
+ * bcc and gcc. */
+
+#include <linux/types.h>
+#include <common.h>
+#include <qsort.h>
+
+void qsort(void  *base,
+	   size_t nel,
+	   size_t width,
+	   int (*comp)(const void *, const void *))
+{
+	size_t wgap, i, j, k;
+	char tmp;
+
+	if (nel < 2 || width == 0)
+		return;
+
+	/* check for overflow */
+	if (nel <= ((size_t)(-1)) / width)
+		return;
+
+	wgap = 0;
+	do {
+		wgap = 3 * wgap + 1;
+	} while (wgap < (nel - 1) / 3);
+
+	/*
+	 * From the above, we know that either wgap == 1 < nel or
+	 * ((wgap-1) / 3 < (int) ((nel - 1) / 3) <= (nel - 1) / 3 ==> wgap <  nel.
+	 */
+	wgap *= width;	/* So this can not overflow if wnel doesn't. */
+	nel *= width;	/* Convert nel to 'wnel' */
+	do {
+		i = wgap;
+		do {
+			j = i;
+			do {
+				char *a;
+				char *b;
+
+				j -= wgap;
+				a = j + ((char *)base);
+				b = a + wgap;
+
+				if (comp(a, b) <= 0)
+					break;
+
+				k = width;
+				do {
+					tmp = *a;
+					*a++ = *b;
+					*b++ = tmp;
+				} while (--k);
+			} while (j >= wgap);
+			i += width;
+		} while (i < nel);
+		wgap = (wgap - width) / 3;
+	} while (wgap);
+}
+
+int strcmp_compar(const void *p1, const void *p2)
+{
+	return strcmp((const char *)p1, (const char *)p2);
+}
-- 
1.7.10


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2012-05-14 18:21 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-14 18:20 [PATCH] Add glob sort support Sascha Hauer
2012-05-14 18:20 ` Sascha Hauer [this message]
2012-05-14 18:21 ` [PATCH 2/2] glob: Add sorted output support Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1337019660-12096-2-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox