From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from exprod5og108.obsmtp.com ([64.18.0.186]) by merlin.infradead.org with smtps (Exim 4.76 #1 (Red Hat Linux)) id 1SV3u1-0004Sj-5j for barebox@lists.infradead.org; Thu, 17 May 2012 16:50:15 +0000 From: Renaud Barbier Date: Thu, 17 May 2012 17:49:51 +0100 Message-Id: <1337273391-20858-10-git-send-email-renaud.barbier@ge.com> In-Reply-To: <1337273391-20858-1-git-send-email-renaud.barbier@ge.com> References: <1337273391-20858-1-git-send-email-renaud.barbier@ge.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH V5 9/9] Minimal P2020RDB platform support and configuration file To: barebox@lists.infradead.org This is limited board support for the Freescale P2020RDB in single CPU mode. The DDR is configured for a memory bus running at 667Mhz. The system boots from NOR flash and provides the console at 115200 bauds, no other drivers are included. Finally, the PPC Kconfig and make file make the building of the P2020RDB platform firmware possible. Signed-off-by: Renaud Barbier --- arch/ppc/Makefile | 1 + arch/ppc/boards/freescale-p2020rdb/Makefile | 4 + arch/ppc/boards/freescale-p2020rdb/barebox.lds.S | 144 ++++++++++++++ arch/ppc/boards/freescale-p2020rdb/config.h | 98 +++++++++ arch/ppc/boards/freescale-p2020rdb/law.c | 31 +++ arch/ppc/boards/freescale-p2020rdb/p2020rdb.c | 230 ++++++++++++++++++++++ arch/ppc/boards/freescale-p2020rdb/tlb.c | 62 ++++++ arch/ppc/configs/p2020rdb_defconfig | 23 +++ 8 files changed, 593 insertions(+), 0 deletions(-) create mode 100644 arch/ppc/boards/freescale-p2020rdb/Makefile create mode 100644 arch/ppc/boards/freescale-p2020rdb/barebox.lds.S create mode 100644 arch/ppc/boards/freescale-p2020rdb/config.h create mode 100644 arch/ppc/boards/freescale-p2020rdb/law.c create mode 100644 arch/ppc/boards/freescale-p2020rdb/p2020rdb.c create mode 100644 arch/ppc/boards/freescale-p2020rdb/tlb.c create mode 100644 arch/ppc/configs/p2020rdb_defconfig diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile index 67eb667..f0322a2 100644 --- a/arch/ppc/Makefile +++ b/arch/ppc/Makefile @@ -12,6 +12,7 @@ CPPFLAGS += -Wa,-me500x2 -msoft-float -mno-string endif board-$(CONFIG_MACH_PHYCORE_MPC5200B_TINY) := pcm030 +board-$(CONFIG_P2020RDB) := freescale-p2020rdb machine-$(CONFIG_ARCH_MPC5200) := mpc5xxx machine-$(CONFIG_ARCH_MPC85XX) := mpc85xx diff --git a/arch/ppc/boards/freescale-p2020rdb/Makefile b/arch/ppc/boards/freescale-p2020rdb/Makefile new file mode 100644 index 0000000..141b680 --- /dev/null +++ b/arch/ppc/boards/freescale-p2020rdb/Makefile @@ -0,0 +1,4 @@ +obj-y += p2020rdb.o +obj-y += law.o +obj-y += tlb.o +extra-y += barebox.lds diff --git a/arch/ppc/boards/freescale-p2020rdb/barebox.lds.S b/arch/ppc/boards/freescale-p2020rdb/barebox.lds.S new file mode 100644 index 0000000..cfccea9 --- /dev/null +++ b/arch/ppc/boards/freescale-p2020rdb/barebox.lds.S @@ -0,0 +1,144 @@ +/* + * Copyright 2012 GE Intelligent Platforms, Inc. + * Copyright 2007-2009, 2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#define RESET_VECTOR_ADDRESS 0xeffffffc + +OUTPUT_ARCH("powerpc") + +PHDRS +{ + text PT_LOAD; + bss PT_LOAD; +} + +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = TEXT_BASE; + + .text : + { + *(.text*) + } :text + + _etext = .; + PROVIDE (etext = .); + + .rodata : + { + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) + } :text + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + _GOT2_TABLE_ = .; + KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); + _FIXUP_TABLE_ = .; + KEEP(*(.fixup)) + } + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data*) + *(.data1*) + *(.sdata*) + *(.sdata2*) + *(.dynamic*) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __barebox_cmd_start = .; + .barebox_cmd : { BAREBOX_CMDS } + __barebox_cmd_end = .; + + __barebox_initcalls_start = .; + .barebox_initcalls : { INITCALLS } + __barebox_initcalls_end = .; + __initcall_entries = (__barebox_initcalls_end - __barebox_initcalls_start)>>2; + + __usymtab_start = .; + __usymtab : { BAREBOX_SYMS } + __usymtab_end = .; + + __early_init_data_begin = .; + .early_init_data : { *(.early_init_data) } + __early_init_data_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __init_size = __init_end - _start; + + .bootpg RESET_VECTOR_ADDRESS - 0xffc : + { + _text = .; + _stext = .; + arch/ppc/cpu-85xx/start.o (.bootpg) + } :text = 0xffff + + .resetvec RESET_VECTOR_ADDRESS : + { + arch/ppc/cpu-85xx/resetvec.o (.resetvec) + } :text = 0xffff + + . = RESET_VECTOR_ADDRESS + 0x4; + + . = 0x10000; + __bss_start = .; + .bss : + { + *(.sbss*) *(.scommon*) + *(.dynbss*) + *(.bss*) + *(COMMON) + } :bss + + . = ALIGN(4); + __bss_stop = .; + _end = . ; + PROVIDE (end = .); +} diff --git a/arch/ppc/boards/freescale-p2020rdb/config.h b/arch/ppc/boards/freescale-p2020rdb/config.h new file mode 100644 index 0000000..c780747 --- /dev/null +++ b/arch/ppc/boards/freescale-p2020rdb/config.h @@ -0,0 +1,98 @@ +/* + * Copyright 2012 GE Intelligent Platforms, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * P2020RDB board configuration file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#ifndef __ASSEMBLY__ +extern unsigned long get_board_sys_clk(unsigned long dummy); +#endif +#define CFG_SYS_CLK_FREQ get_board_sys_clk(0) +#define CFG_DDR_CLK_FREQ 66666666 + +#define CFG_BTB /* toggle branch predition */ + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CFG_CCSRBAR_DEFAULT 0xff700000 + +#define CFG_CCSRBAR 0xffe00000 /* relocated CCSRBAR */ +#define CFG_CCSRBAR_PHYS CFG_CCSRBAR + +#define CFG_IMMR CFG_CCSRBAR + +/* DDR Setup */ + +#define CFG_CHIP_SELECTS_PER_CTRL 1 + +#define CFG_SDRAM_BASE 0x00000000 + +/* These timings are adjusted for a 667Mhz clock. */ +#define CFG_SYS_DDR_CS0_BNDS 0x0000003f /* 1GB */ +#define CFG_SYS_DDR_CS0_CONFIG 0x80014202 +#define CFG_SYS_DDR_TIMING_3 0x00030000 +#define CFG_SYS_DDR_TIMING_0 0x55770802 +#define CFG_SYS_DDR_TIMING_1 0x5f599543 +#define CFG_SYS_DDR_TIMING_2 0x0fa074d1 + +#define CFG_SYS_DDR_CONTROL 0xc3000000 +#define CFG_SYS_DDR_CONTROL2 0x24401000 +#define CFG_SYS_DDR_MODE_1 0x00040852 +#define CFG_SYS_DDR_MODE_2 0x00000000 +#define CFG_SYS_MD_CNTL 0x00000000 +#define CFG_SYS_DDR_INTERVAL 0x0a280100 + +#define CFG_SYS_DDR_DATA_INIT 0xdeadbeef +#define CFG_SYS_DDR_CLK_CTRL 0x03000000 + +/* + * Memory map + * + * 0x0000_0000 0x3fff_ffff DDR 1G cacheablen + * + * Localbus non-cacheable + * 0xef00_0000 0xefff_ffff FLASH 16M non-cacheable + * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 + */ + +/* + * Local Bus Definitions + */ +#define CFG_FLASH_BASE 0xef000000 +#define CFG_FLASH_BASE_PHYS CFG_FLASH_BASE + +#define CFG_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ +/* Leave 256 bytes for global data */ +#define CFG_INIT_SP_OFFSET (0x00004000 - 256) + +#define CFG_BR0_PRELIM (BR_PHYS_ADDR(CFG_FLASH_BASE_PHYS) | \ + BR_PS_16 | BR_V) /* NOR Base Address */ +#define CFG_OR0_PRELIM 0xff000ff7 /* NOR Options */ + +#endif /* __CONFIG_H */ diff --git a/arch/ppc/boards/freescale-p2020rdb/law.c b/arch/ppc/boards/freescale-p2020rdb/law.c new file mode 100644 index 0000000..394c512 --- /dev/null +++ b/arch/ppc/boards/freescale-p2020rdb/law.c @@ -0,0 +1,31 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +struct law_entry law_table[] = { + FSL_SET_LAW(CFG_FLASH_BASE_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_LBC), +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/arch/ppc/boards/freescale-p2020rdb/p2020rdb.c b/arch/ppc/boards/freescale-p2020rdb/p2020rdb.c new file mode 100644 index 0000000..20897cb --- /dev/null +++ b/arch/ppc/boards/freescale-p2020rdb/p2020rdb.c @@ -0,0 +1,230 @@ +/* + * Copyright 2012 GE Intelligent Platforms, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define VSC7385_RST_SET 0x00080000 +#define SLIC_RST_SET 0x00040000 +#define SGMII_PHY_RST_SET 0x00020000 +#define PCIE_RST_SET 0x00010000 +#define RGMII_PHY_RST_SET 0x02000000 + +#define USB_RST_CLR 0x04000000 + +#define GPIO_DIR 0x060f0000 + +#define BOARD_PERI_RST_SET (VSC7385_RST_SET | SLIC_RST_SET | \ + SGMII_PHY_RST_SET | PCIE_RST_SET | \ + RGMII_PHY_RST_SET) + +#define SYSCLK_MASK 0x00200000 +#define BOARDREV_MASK 0x10100000 +#define BOARDREV_B 0x10100000 +#define BOARDREV_C 0x00100000 +#define BOARDREV_D 0x00000000 + +#define SYSCLK_66 66666666 +#define SYSCLK_50 50000000 +#define SYSCLK_100 100000000 + +static int devices_init(void) +{ + add_cfi_flash_device(-1, CFG_FLASH_BASE, 16 << 20, 0); + + devfs_add_partition("nor0", 0xf80000, 0x80000, DEVFS_PARTITION_FIXED, + "self0"); + return 0; +} + +device_initcall(devices_init); + +static struct NS16550_plat serial_plat = { + .clock = 0, + .shift = 0, +}; + +static int p2020_console_init(void) +{ + serial_plat.clock = fsl_get_bus_freq(0); + + add_ns16550_device(-1, 0xffe04500, 16, IORESOURCE_MEM_8BIT, + &serial_plat); + return 0; +} + +console_initcall(p2020_console_init); + +static int mem_init(void) +{ + barebox_add_memory_bank("ram0", 0x0, 1024 << 20); + + return 0; +} +mem_initcall(mem_init); + +/* + * fixed_sdram: fixed sdram settings. + */ +phys_size_t fixed_sdram(void) +{ + void __iomem *regs = (void __iomem *)(MPC85xx_DDR_ADDR); + int sdram_cfg = (SDRAM_CFG_MEM_EN | SDRAM_CFG_SREN | + SDRAM_CFG_SDRAM_TYPE_DDR2); + phys_size_t dram_size; + + /* If already enabled (running from RAM), get out */ + if (in_be32(regs + DDR_OFF(SDRAM_CFG)) & SDRAM_CFG_MEM_EN) + return fsl_get_effective_memsize(); + + out_be32(regs + DDR_OFF(CS0_BNDS), CFG_SYS_DDR_CS0_BNDS); + out_be32(regs + DDR_OFF(CS0_CONFIG), CFG_SYS_DDR_CS0_CONFIG); + out_be32(regs + DDR_OFF(TIMING_CFG_3), CFG_SYS_DDR_TIMING_3); + out_be32(regs + DDR_OFF(TIMING_CFG_0), CFG_SYS_DDR_TIMING_0); + out_be32(regs + DDR_OFF(TIMING_CFG_1), CFG_SYS_DDR_TIMING_1); + out_be32(regs + DDR_OFF(TIMING_CFG_2), CFG_SYS_DDR_TIMING_2); + out_be32(regs + DDR_OFF(SDRAM_CFG_2), CFG_SYS_DDR_CONTROL2); + out_be32(regs + DDR_OFF(SDRAM_MODE), CFG_SYS_DDR_MODE_1); + out_be32(regs + DDR_OFF(SDRAM_MODE_2), CFG_SYS_DDR_MODE_2); + out_be32(regs + DDR_OFF(SDRAM_MD_CNTL), CFG_SYS_MD_CNTL); + /* Basic refresh rate (7.8us),high temp is 3.9us */ + out_be32(regs + DDR_OFF(SDRAM_INTERVAL), + CFG_SYS_DDR_INTERVAL); + out_be32(regs + DDR_OFF(SDRAM_DATA_INIT), + CFG_SYS_DDR_DATA_INIT); + out_be32(regs + DDR_OFF(SDRAM_CLK_CNTL), + CFG_SYS_DDR_CLK_CTRL); + + out_be32(regs + DDR_OFF(SDRAM_INIT_ADDR), 0); + out_be32(regs + DDR_OFF(SDRAM_INIT_ADDR_EXT), 0); + /* + * Wait 200us for the DDR clock to stabilize. + */ + early_udelay(200); + asm volatile ("sync;isync"); + + out_be32(regs + DDR_OFF(SDRAM_CFG), sdram_cfg); + + dram_size = fsl_get_effective_memsize(); + if (fsl_set_ddr_laws(0, dram_size, LAW_TRGT_IF_DDR) < 0) + return 0; + + return dram_size; +} + +unsigned long get_board_sys_clk(ulong dummy) +{ + u32 val_gpdat, sysclk_gpio, board_rev_gpio; + void __iomem *gpio_regs = (void __iomem *)MPC85xx_GPIO_ADDR; + + val_gpdat = in_be32(gpio_regs + MPC85xx_GPIO_GPDAT); + sysclk_gpio = val_gpdat & SYSCLK_MASK; + board_rev_gpio = val_gpdat & BOARDREV_MASK; + + if (board_rev_gpio == BOARDREV_C) { + if (sysclk_gpio == 0) + return SYSCLK_66; + else + return SYSCLK_100; + } else if (board_rev_gpio == BOARDREV_B) { + if (sysclk_gpio == 0) + return SYSCLK_66; + else + return SYSCLK_50; + } else if (board_rev_gpio == BOARDREV_D) { + if (sysclk_gpio == 0) + return SYSCLK_66; + else + return SYSCLK_100; + } + return 0; +} + +static void checkboard(void) +{ + u32 val_gpdat, board_rev_gpio; + void __iomem *gpio_regs = (void __iomem *)MPC85xx_GPIO_ADDR; + + val_gpdat = in_be32(gpio_regs + MPC85xx_GPIO_GPDAT); + board_rev_gpio = val_gpdat & BOARDREV_MASK; + + if ((board_rev_gpio != BOARDREV_C) && (board_rev_gpio != BOARDREV_B) && + (board_rev_gpio != BOARDREV_D)) + panic("Unexpected Board REV %x detected!!\n", board_rev_gpio); + + setbits_be32((gpio_regs + MPC85xx_GPIO_GPDIR), GPIO_DIR); + + /* + * Bringing the following peripherals out of reset via GPIOs + * 0 = reset and 1 = out of reset + * GPIO12 - Reset to Ethernet Switch + * GPIO13 - Reset to SLIC/SLAC devices + * GPIO14 - Reset to SGMII_PHY_N + * GPIO15 - Reset to PCIe slots + * GPIO6 - Reset to RGMII PHY + * GPIO5 - Reset to USB3300 devices 1 = reset and 0 = out of reset + */ + clrsetbits_be32((gpio_regs + MPC85xx_GPIO_GPDAT), USB_RST_CLR, + BOARD_PERI_RST_SET); +} + +static int board_init_r(void) +{ + const unsigned int flashbase = CFG_FLASH_BASE; + const u8 flash_esel = e500_find_tlb_idx((void *)flashbase, 1); + + checkboard(); + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash */ + e500_disable_tlb(flash_esel); + + /* + * Remap Boot flash region to caching-inhibited + * so that flash can be erased properly. + */ + e500_set_tlb(1, flashbase, CFG_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_16M, 1); + + fsl_l2_cache_init(); + + return 0; +} +core_initcall(board_init_r); diff --git a/arch/ppc/boards/freescale-p2020rdb/tlb.c b/arch/ppc/boards/freescale-p2020rdb/tlb.c new file mode 100644 index 0000000..5f3b4a7 --- /dev/null +++ b/arch/ppc/boards/freescale-p2020rdb/tlb.c @@ -0,0 +1,62 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + FSL_SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + FSL_SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + (4 * 1024), + CFG_INIT_RAM_ADDR + (4 * 1024), + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + FSL_SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + (8 * 1024), + CFG_INIT_RAM_ADDR + (8 * 1024), + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + FSL_SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + (12 * 1024), + CFG_INIT_RAM_ADDR + (12 * 1024), + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ + FSL_SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_4K, 1), + + /* *I*G* - CCSRBAR */ + FSL_SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_1M, 1), + + /* W**G* - Flash/promjet, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + FSL_SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 2, BOOKE_PAGESZ_16M, 1), +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/arch/ppc/configs/p2020rdb_defconfig b/arch/ppc/configs/p2020rdb_defconfig new file mode 100644 index 0000000..f8a0687 --- /dev/null +++ b/arch/ppc/configs/p2020rdb_defconfig @@ -0,0 +1,23 @@ +CONFIG_ARCH_MPC85XX=y +CONFIG_P2020RDB=y +CONFIG_P2020=y +CONFIG_LONGHELP=y +CONFIG_GLOB=y +CONFIG_CMDLINE_EDITING=y +CONFIG_AUTO_COMPLETE=y +CONFIG_CMD_SLEEP=y +CONFIG_CMD_FLASH=y +CONFIG_CMD_RESET=y +CONFIG_CMD_GO=y +CONFIG_FSL_ELBC=y +CONFIG_DRIVER_CFI=y +CONFIG_DRIVER_CFI_AMD=y +CONFIG_DRIVER_CFI_INTEL=n +CONFIG_DRIVER_CFI_BANK_WIDTH_1=n +CONFIG_DRIVER_CFI_BANK_WIDTH_2=y +CONFIG_DRIVER_CFI_BANK_WIDTH_4=n +CONFIG_MTD=y +CONFIG_MALLOC_SIZE=0x200000 +CONFIG_BAUDRATE=115200 +CONFIG_DRIVER_SERIAL_NS16550=y +CONFIG_RELOCATABLE=y -- 1.7.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox