mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH 1/2] ARM Freescale i.MX51 babbage: switch to new default env
@ 2012-05-23 14:15 Sascha Hauer
  2012-05-23 14:15 ` [PATCH 2/2] defaultenv-2: automount script: run mount only when ifup succeeds Sascha Hauer
  0 siblings, 1 reply; 2+ messages in thread
From: Sascha Hauer @ 2012-05-23 14:15 UTC (permalink / raw)
  To: barebox

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boards/freescale-mx51-pdk/env/config      |   47 --------------------
 .../freescale-mx51-pdk/env/init/bootargs-base      |    8 ++++
 .../boards/freescale-mx51-pdk/env/init/hostname    |    8 ++++
 arch/arm/configs/freescale_mx51_babbage_defconfig  |   16 ++++---
 arch/arm/mach-imx/Kconfig                          |    1 +
 5 files changed, 27 insertions(+), 53 deletions(-)
 delete mode 100644 arch/arm/boards/freescale-mx51-pdk/env/config
 create mode 100644 arch/arm/boards/freescale-mx51-pdk/env/init/bootargs-base
 create mode 100644 arch/arm/boards/freescale-mx51-pdk/env/init/hostname

diff --git a/arch/arm/boards/freescale-mx51-pdk/env/config b/arch/arm/boards/freescale-mx51-pdk/env/config
deleted file mode 100644
index 7a2841e..0000000
--- a/arch/arm/boards/freescale-mx51-pdk/env/config
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/bin/sh
-
-hostname=babbage
-eth0.serverip=
-user=
-
-# use 'dhcp' to do dhcp in barebox and in kernel
-# use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
-
-# or set your networking parameters here
-#eth0.ipaddr=a.b.c.d
-#eth0.netmask=a.b.c.d
-#eth0.gateway=a.b.c.d
-#eth0.serverip=a.b.c.d
-
-# can be either 'nfs', 'tftp', 'nor' or 'nand'
-kernel_loc=tftp
-# can be either 'net', 'nor', 'nand' or 'initrd'
-rootfs_loc=net
-
-# can be either 'jffs2' or 'ubifs'
-rootfs_type=ubifs
-rootfsimage=root-$hostname.$rootfs_type
-
-kernelimage=zImage-$hostname
-#kernelimage=uImage-$hostname
-#kernelimage=Image-$hostname
-#kernelimage=Image-$hostname.lzo
-
-if [ -n $user ]; then
-	kernelimage="$user"-"$kernelimage"
-	nfsroot="$eth0.serverip:/home/$user/nfsroot/$hostname"
-	rootfsimage="$user"-"$rootfsimage"
-else
-	nfsroot="$eth0.serverip:/path/to/nfs/root"
-fi
-
-autoboot_timeout=3
-
-bootargs="console=ttymxc0,115200"
-
-disk_parts="256k(barebox)ro,128k(bareboxenv),4M(kernel),-(root)"
-
-# set a fancy prompt (if support is compiled in)
-PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
-
diff --git a/arch/arm/boards/freescale-mx51-pdk/env/init/bootargs-base b/arch/arm/boards/freescale-mx51-pdk/env/init/bootargs-base
new file mode 100644
index 0000000..d869754
--- /dev/null
+++ b/arch/arm/boards/freescale-mx51-pdk/env/init/bootargs-base
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+	init-menu-add-entry "$0" "Base bootargs"
+	exit
+fi
+
+global.linux.bootargs.base="console=ttymxc0,115200"
diff --git a/arch/arm/boards/freescale-mx51-pdk/env/init/hostname b/arch/arm/boards/freescale-mx51-pdk/env/init/hostname
new file mode 100644
index 0000000..4c78902
--- /dev/null
+++ b/arch/arm/boards/freescale-mx51-pdk/env/init/hostname
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+	init-menu-add-entry "$0" "hostname"
+	exit
+fi
+
+global.hostname=babbage
diff --git a/arch/arm/configs/freescale_mx51_babbage_defconfig b/arch/arm/configs/freescale_mx51_babbage_defconfig
index c4f7aef..22ef163 100644
--- a/arch/arm/configs/freescale_mx51_babbage_defconfig
+++ b/arch/arm/configs/freescale_mx51_babbage_defconfig
@@ -3,6 +3,7 @@ CONFIG_ARCH_IMX51=y
 CONFIG_IMX_IIM=y
 CONFIG_IMX_IIM_FUSE_BLOW=y
 CONFIG_AEABI=y
+CONFIG_THUMB2_BAREBOX=y
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
 CONFIG_ARM_UNWIND=y
 CONFIG_MMU=y
@@ -11,23 +12,26 @@ CONFIG_MALLOC_SIZE=0x2000000
 CONFIG_MALLOC_TLSF=y
 CONFIG_KALLSYMS=y
 CONFIG_LONGHELP=y
-CONFIG_GLOB=y
 CONFIG_HUSH_FANCY_PROMPT=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_MENU=y
+CONFIG_DEFAULT_ENVIRONMENT_COMPRESSED_LZO=y
 CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/freescale-mx51-pdk/env/"
 CONFIG_CMD_EDIT=y
 CONFIG_CMD_SLEEP=y
 CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_LOADENV=y
 CONFIG_CMD_EXPORT=y
 CONFIG_CMD_PRINTENV=y
 CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_ECHO_E=y
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_IOMEM=y
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
 CONFIG_CMD_FLASH=y
 CONFIG_CMD_BOOTM_SHOW_TYPE=y
 CONFIG_CMD_BOOTM_VERBOSE=y
@@ -47,10 +51,8 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_UNCOMPRESS=y
 CONFIG_NET=y
 CONFIG_NET_DHCP=y
-CONFIG_NET_NFS=y
 CONFIG_NET_PING=y
-CONFIG_NET_TFTP=y
-CONFIG_NET_TFTP_PUSH=y
+CONFIG_NET_RESOLV=y
 CONFIG_DRIVER_NET_FEC_IMX=y
 CONFIG_DRIVER_SPI_IMX=y
 CONFIG_DRIVER_CFI=y
@@ -59,6 +61,8 @@ CONFIG_MCI=y
 CONFIG_MCI_STARTUP=y
 CONFIG_MCI_IMX_ESDHC=y
 CONFIG_MFD_MC13XXX=y
+CONFIG_FS_TFTP=y
+CONFIG_FS_NFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FAT_WRITE=y
 CONFIG_FS_FAT_LFN=y
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 7905027..564e2fe 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -391,6 +391,7 @@ choice
 	prompt "i.MX51 Board Type"
 
 config MACH_FREESCALE_MX51_PDK
+	select DEFAULT_ENVIRONMENT_GENERIC_NEW
 	bool "Freescale i.MX51 PDK"
 
 config MACH_EUKREA_CPUIMX51SD
-- 
1.7.10


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 2+ messages in thread
* [PATCH 2/2] defaultenv-2: automount script: run mount only when ifup succeeds
  2012-05-23 14:15 [PATCH 1/2] ARM Freescale i.MX51 babbage: switch to new default env Sascha Hauer
@ 2012-05-23 14:15 ` Sascha Hauer
  0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2012-05-23 14:15 UTC (permalink / raw)
  To: barebox

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 defaultenv-2/base/init/automount |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/defaultenv-2/base/init/automount b/defaultenv-2/base/init/automount
index e029222..63099f9 100644
--- a/defaultenv-2/base/init/automount
+++ b/defaultenv-2/base/init/automount
@@ -8,20 +8,20 @@ fi
 # automount server returned from dhcp server
 
 mkdir -p /mnt/tftp-dhcp
-automount /mnt/tftp-dhcp 'ifup eth0; mount $eth0.serverip tftp /mnt/tftp-dhcp'
+automount /mnt/tftp-dhcp 'ifup eth0 && mount $eth0.serverip tftp /mnt/tftp-dhcp'
 
 # automount nfs server example
 
 #nfshost=somehost
 #mkdir -p /mnt/${nfshost}
-#automount /mnt/$nfshost "ifup eth0; mount ${nfshost}:/tftpboot nfs /mnt/${nfshost}"
+#automount /mnt/$nfshost "ifup eth0 && mount ${nfshost}:/tftpboot nfs /mnt/${nfshost}"
 
 # static tftp server example
 
 #mkdir -p /mnt/tftp
-#automount -d /mnt/tftp 'ifup eth0; mount $serverip tftp /mnt/tftp'
+#automount -d /mnt/tftp 'ifup eth0 && mount $serverip tftp /mnt/tftp'
 
 # FAT on usb disk example
 
 #mkdir -p /mnt/fat
-#automount -d /mnt/fat 'usb; mount /dev/usbdisk0.0 fat $automount_path'
+#automount -d /mnt/fat 'usb && [ -e /dev/disk0.0 ] && mount /dev/disk0.0 fat /mnt/fat'
-- 
1.7.10


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-05-23 14:15 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-05-23 14:15 [PATCH 1/2] ARM Freescale i.MX51 babbage: switch to new default env Sascha Hauer
2012-05-23 14:15 ` [PATCH 2/2] defaultenv-2: automount script: run mount only when ifup succeeds Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox